Used Euromac Xt Flex 12S 1500/30-2500 for sale (41,552)

Year of construction: 2004, condition: used, We offer this used MAPLAN MHF 1500/300E1 Maplan MTF 1500/300, year of manufacture 2004. Machine type: MHF 1500/300E1 Serial number: 20401486 Year of manufacture: 2004 Rated connected power: 78 kW Voltage: 3~ 400 V 50 Hz Condition: ready for operation (used) Operating hours: 67,594h Iiedpfx Asyf E Txspcsg Description: Clamping force: 3000kN Injection volume: 1500ccm Tie bar spacing (transverse): 600mm Tie bar spacing (longitudinal): 600mm Heater plate size (W/D): 550 /630mm Daylight opening (open machine): 500mm Connected power: 78kW Power supply: 3x 400V/50Hz Machine dimensions (LxWxH): approx. 4.80 x 1.80 x 2.30 m Machine weight: approx. 7500kg Type of incoming current: standard industrial three-phase electricity supply Equipment: documentation If you have further questions or require more information, please send us a message or call us.

Condition: good (used), Marble plate STIEFELMAYER Length: 3000 mm Width: 1500 mm Thickness: 350 mm Height on feet: 600 mm Number of feet: 6 feet Weight: approx 4 T Isdpfxozwxabo Apcsig It was used as a coordinate measuring marble. 2 same marble plates available.

Year of construction: 2008, condition: good (used), Centralized dust, fume, and solid pollutant extraction system for industrial facilities. The VAC unit is an ideal choice for a high vacuum system for welding fume extraction and dust removal from grinding and polishing processes. Capacity: 1,500 m³/h at 20,000 Pa vacuum Max vacuum: 22,000 Pa Inlet diameter: 135 mm Iisdpjpug Dpofx Apcog Motor power: 22 kW Includes FlexFilter DX filtration unit with ATEX explosion relief panel (the panel discharges pressure in the event of an explosion). Separation efficiency: approx. 99.95% (fine dust) Additional cartridge filters on the clean air outlet. Noise silencer. The device is equipped with a new set of filter bags.

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 3520130500485, operating pressure: 150 bar, total length: 406 mm, high-pressure hose length: 15,000 mm, total height: 1,016 mm, total width: 406 mm, input voltage: 220 V, fuel: electricity, overall weight: 38 kg, pressure (max.): 165 bar, The Nilfisk Poseidon 3-30 XT is equipped with a hose reel and two high-pressure lances. The integrated detergent injector and the suction hose on the rear of the unit enable quick and easy application of the detergent. The rotary knob for detergent dosage is located in the same position. Iijdpfxszl Tu Ae Apceg Technical specifications: Pressure: max. 165 bar Cleaning performance: 3.0 Max. inlet temperature: 60 degrees Weight: 38 kg

Condition: new, table length 3000 mm table width 1500 mm table height 200 mm weight of the machine ca. 1,6 t The table Professional Extreme Article no. 7D 3000x1500x200 mm has a diagonal hole arrangement on the table top and a parallel hole arrangement in 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Iodjgvkdbopfx Apceig Including 6x feet basic equipment 650 Article no. 280858.X

Year of construction: 2003, condition: used, We offer this used MAPLAN MHF 1500/300E Maplan MTF 1500/300 injection moulding machine, year 2003. Iodpfx Apsyf E Rwjcsig Machine type: MHF 1500/300E Serial number: 20301386 Year of manufacture: 2003 Output power: 73 kW Voltage: 400 V Frequency: 50 Hz Number of phases: 3 Controller type: B&R - CP152 Panel type: Maplan PC 4000 - DOS Year of manufacture: 2003 Condition: ready for operation (used) Operating hours: 78,154h Description: Clamping force: 3000 kN Shot volume: 1500 ccm Tie bar distance, crosswise: 600 mm Tie bar distance, lengthwise: 600 mm Heater plate size (W/L): 550 / 630 mm Daylight between open platens: 640 mm Connected load: 73 kW Power supply: 3x 400V / 50Hz Machine dimensions (LxWxH): approx. 4.80 x 1.80 x 2.30 m Machine weight: approx. 7500 kg Input current type: standard industrial three-phase electrical connection Equipment: documentation If you have any further questions or require more information, please send us a message or call us.

Condition: used, Electric dual-screw unit with automatic feed and pneumatic double stroke, mounted on a handling device, handling system, or manipulator for screwing applications. Screw unit: BÖLLHOFF / BOSCH REXROTH, type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual-screw unit has a pneumatic double stroke controlled by Festo valves and cylinders. Various monitoring systems are also installed for complete automation. Screwdriver 1 consists of the following components: Rexroth, type: Servomotor Rexroth, type 0: Planetary gearbox Rexroth, type 0: Encoder Rexroth, type 0: Inline gearbox Screwdriver 2 consists of the following components: Rexroth, type: Servomotor Rexroth, type 0: Planetary gearbox Rexroth, type 0: Encoder Rexroth, type 0: Offset gearbox Dimensions (W x H x D): 165 x 1000 x 200 mm Pneumatic long stroke: 30 mm Pneumatic short stroke: 20 mm Screwdriver spring stroke: 20 mm Last used screws: M6 x 15 mm Electric screwdriver unit Rexroth Servomotor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm/A Peak torque: 0.7 Nm Speed: max. 20,000 rpm Iijdpfx Apofx Hyfscjg Current consumption: max. 7 A Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material No.: 0 Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material No.: 0 Nominal torque: 12 Nm Gear ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Inline gearbox Rexroth Type: 2GA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Maximum torque: 10 Nm Gear ratio: 1 Weight: 0.2 kg Installation length: 90 mm Offset gearbox Rexroth Type: 2VNA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Maximum torque: 10 Nm Gear ratio: 1 Weight: 0.6 kg Installation length: 153 mm Handling system: JÄGER HANDLING Type: Handy-flex 300 Horizontal movement: 400 mm Vertical movement: 450 mm Load capacity: max. 14 kg Handyflex reach: 250 to 650 mm Handyflex reach when pivoted up: max. 860 mm Rotation radius at full reach: max. 360° Vertical guide column: Ø 30 mm Horizontal guide columns: Ø 20 mm - Balancer for vertical movement - Adjustable load capacity - Adjustable stop for radius limitation Dimensions (L x W x H): approx. 1150 x 650 x 1400 mm Total weight: approx. 90 kg Good condition Without the blue steel pallet as a base plate The blue steel base plate is not included in the scope of supply.

Condition: good (used), machine/vehicle number: 14012, Offer 14012 Technical data: - Length approx. 3000 mm - Width approx. 1500 mm - Material thickness of the top plate approx. 55 mm - Total height of the ribbed plate approx. 185 mm - Subframe Iisdpfxjw Rnf Is Apceg - Total height with subframe 730 mm - Weight approx. 3500 kg

Condition: good (used), Year of construction: 2006, The machine is equipped with a highly flexible combination of different printing technologies: 8 printing units • 5 x offset printing units • 3 x rotary screen printing units • 2 x flexographic printing/coating units This combination makes the machine particularly suitable for sophisticated label production that requires several printing and finishing processes in a single production line. Included are, among other things: • Numerous printing cylinders • Magnetic cylinders • Extensive anilox rollers • Printing and converting accessories • Screen printing equipment • Additional machine-specific tooling A detailed tooling list can be provided upon request, subject to final inventory. _____ COMPLETE MACHINE CONFIGURATION Printing at all 8 printing units • 5 x offset printing units • 3 x rotary screen printing units • 2 x flexographic printing/coating units Web Handling • Martin Automatic unwinder • Rewinder • Web guiding / web edge control • Corona treatment Drying • UV drying system Inspection • Camera / web inspection system Finishing & Converting • Flexo varnishing station • Rotary hot foil • Cold foil • Rinio embossing unit • Lamination system Iijdszww N Ujpfx Apcog • Kocher & Beck rotary die-cutting Tooling • Printing cylinders • Magnetic cylinders • Anilox rollers • Screen printing accessories • Additional tooling and machine-specific accessories _____

Condition: used, Three-phase motor, electric motor -Handover: in the current state as viewed -Holding foot: damage see pictures -Power: 7.2/12 kW -Speed: 750/1500 rpm -Shaft: Ø 42 x 110 mm -Construction: B3 -Dimensions: 640/310/H370 mm Iijdjfxx N Sspfx Apcsg -Weight: 115 kg

Condition: used, Year of construction: 2021, operating hours: 3,500 h, clamping force: 120 kN, displacement volume: 36 cm³, injection pressure: 2,200 bar, overall weight: 5,400 kg, screw conveyor diameter: 22 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Iedpfezhpg Tex Apcoig

Condition: excellent (used), KUKA Iijdpfxsy Dn Sie Apcsg KUKA KR 180 R2500 extra Industrial Robot + KRC4 Controller For sale is a powerful industrial robot from KUKA, model KR 180 R2500 extra, including KRC4 controller and teach pendant. The system was used in an industrial environment and is fully operational. It is ideally suited for automation, material handling, welding applications, and general production processes. Robot Technical Specifications: - Payload: 180 kg - Reach: approx. 2496 mm - Axes: 6 - Weight: approx. 1059 kg KRC4 Controller Technical Specifications: - Supply voltage: 3 x 400 V - Frequency: 50/60 Hz - Full load current: approx. 20 A - Circuit protection: 25 A - Weight: approx. 151 kg Dimensions (approx.): - Robot height: approx. 2200 – 2500 mm - Footprint: approx. 1000 x 1000 mm - Controller (H x W x D): approx. 1000 x 800 x 800 mm Software / System: - KRC Version: V8.2.22 - HMI Version: 8.2.0.4 B142 - Base System: KS V8.2.142 - Windows Version: XPe V3.0.2 - Additional Axes: 1 Features: - KUKA KRC4 controller - KUKA teach pendant (operator panel) - Connection cables and wiring - Industrial design for continuous operation Condition: - Used, technically fully functional - With normal signs of use - The system was in operation until recently Scope of delivery: - KUKA KR 180 R2500 extra robot - KUKA KRC4 controller - KUKA teach pendant (operator panel) - Connection cables / wiring as depicted in the photos - Scope of delivery: (See images) (Subject to change and errors in technical data; all information provided without liability!) We are happy to answer any further questions by phone.

Condition: used, mileage: 300,000 km, power: 96 kW (130.52 HP), first registration: 07/2017, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 2,830 mm, loading space width: 1,910 mm, loading space height: 1,950 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), had accident, soot filter, !!!!! ENGINE DOES NOT START !!!!! 3-seater, power steering, 6-speed manual transmission, tachometer, power steering, driver airbag, electric windows, on-board computer, electric exterior mirrors, center armrest, Euro 6, air conditioning, central locking + remote control, Thermo-King V-300 Max refrigeration unit up to approx. -18°C, dual cooling, freezer compartment, power connection, wing doors, side door/right, unladen weight: approx. 2,490 kg, payload: approx. 1,010 kg, etc. Errors and prior sale excepted. Typing errors possible. Isdpfx Apey Updbecjig For sale to commercial customers and for export only. !!!! Fg-5646 !!!! Key number 159 !!!!!

Condition: new, Year of construction: 2026, PREMIUM models feature high rigidity and maximum resolution precision, operating in full interpolation across the X, Y, and Z axes. A high-quality CNC milling router designed for subtractive machining, suitable for numerous industries such as industrial, electronic, welding, woodworking, and advertising. These are efficient and precise machines equipped with user-friendly CNC control systems. Optionally – latest UCanCAM V13 software. Technical parameters Spindle 5.5kW / 18,000 rpm inverter, air-cooled Working area 1500x3000 mm Maximum spindle height 350 mm Control DSP Software resolution 0.001 mm Power supply 400V Weight 1380 kg Machine dimensions 2450 x 3800 x 2200 mm Table height 715 mm Vacuum pump 5.5 kW (optional) Vacuum pressure 440 mbar Guideways linear Drive transmission rack and pinion (Z axis – ball screw) Axis drives hybrid servo drives Software UCanCAM V13 (option) Equipment Air-cooled spindle, PREMIUM version Hybrid servo drives Raised Z-axis gantry – 350 mm Vacuum table – 4 independent vacuum zones + T-slot table for manual fixing Tool height sensor included Tool set, collets, levelling feet, and accessories DSP control – digital signal processing Starter milling cutter set Unloading and machine placement are the customer’s responsibility. Power plug on the customer’s side due to various 16A / 32A sockets. Iisdpfoycupwjx Apcog On-site commissioning of CNC routers available upon request, with individual pricing.

Condition: ready for operation (used), B&R 5AP820.1505-00 Automation Panel 800 with 5AC800.EXT1-00 keyboard + 5AC800.EXT3-03 keyboard extension, used, in good condition, 100% functional, scope of delivery as shown in the photos. Ijdjx Equ Nspfx Apcsig

Condition: ready for operation (used), Heidenhain UM 114 ID 325 005-12 SN15160246, used, in good condition, 100% functional, delivery as per photos, professionally fully overhauled and tested with 3 months' warranty, 100% functional, delivery as per photos. Isdpfex Etdgsx Apcoig

Condition: ready for operation (used), Heidenhain UM 114 ID 325 005-12 SN15160246, professionally fully overhauled and tested with 3-month warranty, 100% functional, scope of delivery as shown in the photos. Please note: In the exchange procedure, your defective exchange part must not show any mechanical damage such as fractures, as these cannot be repaired. In such cases, an additional charge of €1,000 including VAT will apply. Attention: You are bidding on an inverter from Heidenhain UM 114 ID 325 005-12 SN15160246 under the exchange service. The unit is professionally fully overhauled and tested, with a 3-month warranty and guaranteed full functionality. Scope of delivery according to photos. For both repair and exchange services, your returned part must be free from mechanical damage such as breakages, as these are irreparable. If such damage is found, a surcharge of €1,000 incl. VAT will be invoiced. Iiodpfex Etdmsx Apcog

Condition: used, mileage: 32,900 km, power: 174 kW (236.57 HP), first registration: 07/2024, fuel type: diesel, color: black, gearing type: automatic, emission class: euro6, number of seats: 8, total length: 5,370 mm, total width: 1,928 mm, total height: 1,901 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, * 174 kW (237 hp) at 4200/min * 2-way speakers, front and rear * 3-seater bench seat, 1st row, comfort, outer seat foldable * 3-seater bench seat, 2nd row, comfort, outer seat foldable * 9G-TRONIC * AGILITY CONTROL suspension * ATTENTION ASSIST * AVANTGARDE * Adaptive brake lights * Aerodynamics package * Passenger airbag * Active Distance Assist DISTRONIC * Active Brake Assist * Active sliding door locking * Active speed limit assist * Active steering assist * Active lane keeping assist * Permanent all-wheel drive * Ambient lighting, 64 colors, cockpit + rear * Armrests for passenger compartment seating * Exit lights * Automatic passenger airbag deactivation * Exterior mirrors, electrically adjustable, heated, with integrated indicators * Exterior mirror, automatically folding * Grab handle in rear with reading light * Illuminated vanity mirrors * Footwell lighting, front * Hill-start assist * BlueEFFICIENCY package * Brake booster failure compensation * CO2-optimized braking system * Tinted glass in rear, black glass * Retractable cup holders in rear armrests * Headliner * Digital interior mirror * EASY PACK package - electric sliding door/tailgate * EASY-PACK tailgate * ECO Start-Stop function * EMISSIONS STANDARD EURO 6e RDE5 M/N1 GR. II * ENERGIZING Comfort * Anti-theft alarm system * Electric operation for sliding door, left * Electric operation for sliding door, right * Electrical system for trailer socket * Extended automatic restart on highways * Driving Assistance Package * Headlamp Assist * Vehicle compatible with HVO fuel * Fuel misfill prevention * Fixed rear window * Window, right side, fixed in side panel/sliding door * Window, front left, fixed in side panel/sliding door * Parking brake, electric * Generator 14 V / 250 A * Generator management * Weight variant 3,200 kg * Seatbelt warning for passenger seat * HOLD function * Grab handle for entry * Grab handle in rear * Main fuel tank 70 liters * Head unit Europe/CIS/Mongolia * Heating for windshield washer system * Manufacturer Mercedes-Benz AG * Interior trim, crystal gray * Wireless charging system for mobile devices * Child recognition in vehicle, passive * Child safety lock on passenger compartment doors * Air conditioning, semi-automatic, TEMPMATIC in rear * Climate control system THERMOTRONIC * Comfort passenger seat * Comfort roof control unit * Comfort driver's seat * Comfort tires * Comfort closing * Communication module (LTE) for digital services * Complete vehicle * PAINT COLOR OBSIDIAN BLACK METALLIC MB 9197 * LEVERKUSEN * LEFT-HAND DRIVE * LUXURY STATION WAGON * Leather Lugano black * Leather steering wheel * Light alloy wheels 7 J x 17, 20-spoke design * Steering wheel adjustable in height and tilt * Steering wheel heating * Live Traffic Information * Lumbar support, driver and passenger seat * Luxury station wagon * Longer seat rails for rear seats Iiodpfoyhunwsx Apcog * M+S tires * MBUX Multimediasystem High * MULTIBEAM LED with Highbeam Assist PLUS * Media Interface Cable Kit * Mercedes-Benz Mobilo with breakdown assistance and extended warranty * Mercedes-Benz emergency call system * Metallic paint * Center console with roller shutter * Center airbag * Multifunction steering wheel * Night lighting, rear * Navigation * Parking package with 360° camera * Premium complete wheel protection (3 years) * Wheelbase 3430 mm, long overhang * Tire pressure monitoring for front and rear axles, wireless * Sliding door, left * Tail lights, brake lights and turn signals in LED technology

Year of construction: 2012, condition: good (used), Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic hose -Hydraulic line: Hansa-Flex PHD240Tx2180AOLAOL45 -Hydraulic hose: HD240T 90 BAR -Price: per piece -Number: 2 pieces -Dimension: Ø 60 x 2020 mm Iisdpfofk Ez Rox Apcog -Weight: 7.1 kg/piece

Year of construction: 2011, condition: like new (used),  Year of manufacture: 2011  Servo drive  Job memory up to 50 jobs  Register control: Semi- and fully rotary  electronic motor control  Electronic web edge control  Waste and misprint stop  Unwind shaft: d=76mm  Unwind diameter: 700mm  Rewind shaft: d=76mm  Rewind diameter: 550mm Iiedpfxopyg Tbj Apcsg  Automatic web stop at machine stop  Flexo printing unit GALLUS EM 340  Web width: 340mmm  Cliché 1.14mm  Fully rotary register control including servo drive  Die-cutting and printing of materials  UV drying  Web width: 410mm  Laminating  Pressure station mounted on printing cylinder  Punching unit LeoMat L  Adaptation of the GALLUS R250 magnetic cylinder  Rotometrics impression cylinder  Grid rewind servo driven  Integrated edge trim suction  Including fully rotative register control

Year of construction: 2022, condition: new, machine/vehicle number: AN2301155, Atlas Copco P2500i power generator The Atlas Copco P2500i iP mobile power generator is a lightweight, efficient and reliable source of mobile power. Thanks to its high fuel efficiency and compact dimensions, the power generator is versatile for daily use, for frequent single jobs, typically for power tools as an inverter power generator or as an emergency generator. With good sound insulation, the emergency generator is very quiet and hardly louder than an electric razor. The emergency generator is equipped with a large fuel tank and therefore runs up to six hours before it needs to be refueled. Despite the large fuel tank, the emergency generator is compact and light enough to be transported across construction sites or stowed away to save space. The intelligent, variable speed control, together with the option of parallel operation, results in an efficient power supply with minimal fuel consumption, as the engine speed is adapted to the current load conditions. Key product features: Atlas Copco P 2500 i inverter power generator Pull starter Large fuel tank Engine oil level monitor Overheating protection Silenced hood CE compliant noise level, quiet Power sockets Inverter technology, stable voltage and frequency Engine alarm: low oil level, overload Speed control for fuel efficiency Connections and cables for parallel operation Voltage 230V / 50Hz Peak power 2.5 Rated power 2.3 Iedpfel R Hy Asx Apcsig Tank capacity (l) 4.0 Starter type pull starter Weight 27.0 Fuel Gasoline Max. Sound pressure level (LPA) at 7 m 63.0 Sound power level (LwA) 88.0 Sockets 2x Schuko 2P+G 16A | 2x Nema 120V 20A | 1x Nema 120V Twist Lock

Condition: like new (used), 1500 m² Schäfer R3000 warehouse racking system, 3 stories Used, in top condition, like new, see pictures. Ground floor: steel construction warehouse racking system, above: 2 floors of Schäfer shelving system Manufacturer: SCHÄFER R3000 CAD planning and assembly 3 stories Partial sale possible Negotiable price: upon request! Goods are in stock. Iisdpfxohzw His Apcsg Transport and assembly available upon request. Inspection possible at any time by appointment. Further information available upon request. We constantly have over 5000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications, and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse). Lenox Trading – Top warehouse technology & used and new heavy-duty racking Description: Are you looking for high-quality warehouse racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers of new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of warehouse racking & steel construction racking immediately available • 30-50 semi-trailer loads of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Whether it's pallet racking, heavy-duty racking, high-bay racking, shelving systems, tire racks or racks for IBC containers – we deliver and assemble throughout Europe with our OWN team! Including CAD planning, transport, disassembly and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS: ONLINE AUCTIONS & LIQUIDATION For disassembly and clearance projects, we offer a complete, all-round carefree package: 1. Fixed-price purchase: Purchase of merchandise, equipment & complete inventory including a thorough cleanup. 2. Commission auction: Conducting auctions on behalf of clients. Our full-service provided by our own employees: Cataloging, office preparation, inspection, goods handover, logistics, dismantling and thorough handover. Whether you found us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: new, Year of construction: 2026, Multifunctional, efficient milling machine, designed for working with stone, manufacturing tombstones but also for wood materials, MDF, plywood, plexiglas. Made of steel and cast iron. Features Rigid device with a precise resolution and full interpolation in each of the X, Y, Z axes Tool height sensor Central lubrication Double vented control panel Strengthened design Water table for material cooling Strengthened guiding rolls - improve inserting and removing workpieces Capabilities tombstone manufacturing (all kinds of stones, ceramics, glass, granite, marble, etc.) stone reliefs, engraving, milling, etc. wooden materials, MDF, plexiglas, plywood, etc. Technical data Working area 1300x2500 (1500x3000mm) Z-axis 400 mm (raised gantry) Spindle 5.5 kW flood coolant Inverter 7.5 kW Controller DSP - digital data processing + RichAuto-AutoNow-A11E control Linear guides Hiwin Ijdpfxsi Ab Akj Apcjig Software Artcam The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. Check our offer on our website.

Condition: used, axle configuration: 3 axles, first registration: 06/2008, total length: 9,480 mm, total width: 2,470 mm, suspension: air, tire size: 385/65 R 22.5, wheelbase: 7,330 mm, Year of construction: 2008, Equipment: ABS, = Additional options and equipment = - Air suspension = Further information = Axle configuration Tyre size: 385/65 R 22.5 Axle brand: SAF Brakes: Drum brakes Suspension: Air suspension Rear axle 1: tread left: 25%; tread right: 25% Iisdpfx Apozvcv Dscsg Rear axle 2: tread left: 25%; tread right: 25% Rear axle 3: tread left: 25%; tread right: 25% Weights Unladen weight: 5,300 kg Payload: 37,700 kg Gross vehicle weight: 43,000 kg Condition Damages: none Identification Registration number: OK-95-KH

Condition: like new (used), functionality: fully functional, Year of construction: 2018, machine/vehicle number: DN2645 /4434, Technical specifications: 1 Schmalz column-mounted swing jib crane, model NL 50KG, year of manufacture 2018 Crane is available in quantities of 2!!! Load capacity at full extension: 50 kg Schmalz vacuum unit with Jumboflex 50 kg suction lifter (quick-change system for additional workshop tools) Iisdpfx Apszvrn Ajceg Overall height: approx. 2.52 m, outreach: approx. 1.8 + 1.25 m, lower boom: approx. 2.35 / 2.5 m Base plate: 30 x 30 cm Total weight approx. 300 kg including vacuum unit Connection to 400V 16A, swivel range 270 + 90° Crane is disassembled and packed on a pallet Item location: 75053 Gondelsheim Only the crane system shown in the pictures is being sold Very good condition - almost new. See pictures Shipping via freight forwarder or collection by appointment.