Used Ernault-Somua Center Lathe for sale (17,978)

Year of construction: 1965, condition: ready for operation (used), A WMW lead and feed spindle lathe that was overhauled in 1993 and has not been used since then is available. Center width: 1600mm, turning length: 1600mm, turning diameter: 250mm, turning diameter over bed/cross slide: 450mm/250mm, steel holder surface X/Y: 140mm/140mm, steel cross-section: 25mm/25mm. Speed: 2240rpm, spindle bore: 45mm, faceplate diameter: 450mm, quill stroke: 160mm, max. workpiece weight: 800kg/1250kg, max. journal diameter: 60mm. Including taper turning device, coolant device and quadruple steel holder. Documentation available. On-site inspection is possible. The machine was not used after its overhaul in 1993. Iisdpovy E A Sofx Ahyoh

Condition: used, Year of construction: 1992, functionality: fully functional, Weiler Praktikant 160 B Lead and Draw Spindle Lathe, built in 1992, with a new 3-axis digital display from K&C, from a vocational training workshop! Technical data: >> Year of manufacture 1992, Machine No. 92-160-2994 >> Center height 160 mm >> Distance between centers 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore 40 mm >> Short taper spindle head, DIN 55027, size 5, with bayonet lock >> Tailstock, MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake, switchable >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital display from K&C with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pieces, taper calculation, radius/diameter, quick zeros, switching of the counting direction >> 3-jaw chuck 160 mm with 1 set of jaws >> Tool clamping system with 2 steel holders >> Bed stop >> Centering point >> Coolant system >> Rear panel >> Machine feet >> Electronic spindle protection >> Operating manual Additional accessories such as collets, 4-jaw chucks, steady rests, and more are available at an extra charge. For safety: Electronic spindle protection, cover for the lead and draw spindle, 2 emergency stop buttons, spindle brake, electronic door protection for the change gears. Iiodpezd Tycefx Ahyoh About the machine: Offered is a Weiler Praktikant 160 B lead and draw spindle lathe in very good condition. All slides run smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced that are as smooth as if they had been ground. Take advantage of the opportunity to inspect this machine on-site while it is powered up and see its condition for yourself.

Condition: excellent (used), functionality: fully functional, Weiler center lathe, model Condor 81, with a leading and following center, and a 3-axis digital display from K&C, NEW. Technical specifications: >> Year of manufacture 1982, machine number 82 017 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027, size 5, with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approximately 1100 kg >> Spindle brake can be engaged >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and equipment: >> 3-axis digital display from K&C, new, 12 months manufacturer's warranty, with operating manual Functions: Switching between mm/inch, coordinate selection ABS/INC, halving the display value, reference mark, tool programming 200 pieces, taper calculation, radius/diameter, quick zeros, switching the counting direction >> 1 three-jaw chuck, 160 mm, 1 set of jaws >> Mulifix size B with 1 steel holder >> Change gears >> Electronic spindle protection >> Back wall >> Coolant system >> Machine feet Isdpfxsz D Hx Ns Ahysih At an extra cost: New collet chuck and new collets from 3 to 26 mm, in 1 mm increments. About the machine: A used Weiler Condor 81 in very good condition is offered. It comes from a training center and has been well maintained. The machine is, of course, fully functional. A very robust and powerful machine. The new 3-axis digital display from K&C makes working even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test this machine on site while it is powered up.

Condition: good (used), functionality: fully functional, spindle bore: 56 mm, turning diameter: 460 mm, JESSEY 1850 ENC CNC Teach-In Lathe — For Sale Reliable Taiwanese-built teach-in CNC lathe equipped with an Anilam 4200T control. Ideal for both manual and programmed turning operations, well suited for workshops that need the flexibility of conventional turning combined with full CNC capability for repeat work. Key features - Anilam 4200T CNC control with Teach-In mode - Heavy-duty spindle with generous bar capacity - Long bed for shaft and large-component work - Tailstock included Iiodey Hmilspfx Ahysh Technical specifications CNC control: Anilam 4200T Distance between centres (turning length): 1250 mm Swing over bed: 460 mm Max. turning diameter: 460 mm Spindle bore (bar capacity): 56 mm Spindle motor power: 7.5 kW Max. spindle speed: 1800 rpm Tailstock: Yes

Condition: ready for operation (used), Year of construction: 1990, L & Z Lathe AFM TUG 40 Type TUG 40 Year of manufacture 1990 Center height 200 mm Diameter over slide 280 mm Iiedpfjz Ixl Aox Ahysh Turning length 1500 mm Drive power 5.5 kW Spindle speeds 18 - 1600 rpm Spindle bore 52 mm Chuck, Lynette, steel tool holder Multifix with inserts Price: Euro 2,250.00 plus VAT, ex works.

Condition: used, Lathe KNUTH SH150H/610 R, year of manufacture 1988 Chuck: 200 mm, spindle bore: 36 mm. Power supply: 16A / 380V. No sales to private individuals. Ijdpfxoz Hkn To Ahyeih

Condition: used, Year of construction: 2015, gebraucht 2015 1686 prompt, Zwischenverkauf v England 14800 € Ijdpfxjwiqv Io Ahyjih 1 330 mm 1000 mm 167 mm 38 mm 210 mm 12 40 - 2500 1/min 16 0.03 - 1 mm/U 0.2 - 14 mm 2 - 56 TPI Gänge/" 190 mm 92 mm 42 mm 3 MK 110 mm 2.2 kW 1940 mm 1000 mm 1550 mm 685 kg 3-axis digital read out Newall 4-jaw chuck Bison diameter 160mm with inside and outside jaws Quick-change tool post with 1 hold Coolant device Chuck protection Steel holder protection Lead screw cover Machine light Manual brake Operating manual in German with EC declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: good (used), Center height: 1,000 mm Distance between centers: 15,600 mm Maximum diameter allowed above the bed: 2,019 mm Maximum diameter allowed above the carriage: 1,625 mm Diameter of the faceplate: 1,800 mm Maximum clamping between chucks: 1,500 mm Maximum load: 75 tons Iisdozbt S Ijpfx Ahyoh Spindle motor power: 82 Approximate dimensions: Length = 21,570 mm, Width = 4,765 mm Accelerated carriage travel: 2,000 mm/min Metric thread possibilities: from 2 to 25 mm Maximum thread length: 800 mm Minimum distance from faceplate to tool: 2,000 mm Accessories: 2 faceplates with a diameter of 1,100 mm on a traveling steady rest 2 steady rests, 150 to 450 mm 2 steady rests, 450 to 750 mm 2 steady rests, 750 to 1,000 mm (on a traveling steady rest) Videos available.

Condition: good (used), functionality: fully functional, spindle bore: 37 mm, turning diameter: 250 mm, turning diameter over bed slide: 250 mm, center height: 125 mm, turning length: 1,000 mm, total length: 1,500 mm, total width: 800 mm, total height: 1,200 mm, spindle speed (max.): 2,000 rpm, rotational speed (max.): 2,000 rpm, Manufacturer: Harrison Model: M-250 Condition: Used Maximum turning diameter over bed: 250 mm Maximum turning length between centers: 1000 mm Spindle bore: 37 mm Maximum spindle speed: 2000 rpm Spindle mount: Camlock Toolholder type: Drehblitz Machine dimensions (L x W x H): 150x80x120 Connection voltage: 400 V Iedpfox Rrpfjx Ahyoih Cooling system: Yes Digital readout: Yes, 2 axes

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, With 3-axis digital display Year of manufacture: 2015 Spindle bore: 54 mm Distance between centers: 1000 mm Center height: 200 mm Speed range: 30 – 3000 rpm, stepless speed control with display on screen Including the following accessories: Multifix tool holder Coolant system Three-jaw chuck Ø 200 mm Four-jaw chuck Ø 250 mm Collet chuck complete with collets up to Ø 32 mm Chuck guard Chip guard with lighting Iiedpfx Aoyybxnehyjh Fixed steady rest Ø approx. 150 mm Travelling steady rest Ø approx. 100 mm 4 pcs. height-adjustable machine feet 1 pc. live center Operating manual

Condition: used, Year of construction: 1996, spindle bore: 105 mm, Brand: GURUTZPE Type: A 800 CNC 2000 Iiodez D U Swepfx Ahysh Year of build: 1996 Serial number: 1-27 Electric connection: 380 V Manual present: true Machine weight: 11000 kg Dimension l: 7300 mm Dimension w: 2200 mm Dimension h: 2350 mm Terms of delivery: Ex foundation-unpackaged Additional information: - Total installed power 40.40 KW. - Maximum turning length 2000 mm. - Turning on 600 mm bed. - Turning on a 500 mm carriage. - Bar pitch diameter 102 mm. - X-axis travel: 350 mm. - X-axis fast feed speed: 6 m/min. - Z-axis fast feed speed: 10 m/min. - Turret: 12 positions, the tools that appear in the photographs are included. - Main spindle: motor power 37 KW, maximum rotation speed 1800 rpm. - 3-jaw plate with a diameter of 500 mm. - Tailstock: Shank diameter 160 mm, rod travel 130 mm. - SIEMENS SINUMERIK control. - Equipped with automatic hydraulic window. - Chip extractor. - Accessories and cutting tools are included.

Condition: used, Technical details: turning diameter over bed: 340 mm turning diameter over support: 190 mm turning length: 700 mm centre distance: 700 mm revolution per minute: 55 - 2350 / 8 step mechanisch U/min spindle bore of work spindle: 50 mm tailstock quill adjustment:: 120 mm tailstock quill: MK3 mm Iiedpfx Aju Ixw Aohyjh max. torque on the spindle: 350 Nm max. workpiece weight -without tailstock: 50 kg total power requirement: 3,0 kVA weight of the machine ca.: 0,79 t dimension machine xH: 1,6 x 0,9 x 1,4 m The machine has seen very little use and was operated only in a repair workshop. Accessories: comparable in the picture 2x steady rest (1x closed and 1x open) various tips various lathe chucks and jaw pairs *

Condition: used, functionality: fully functional, spindle bore: 82 mm, turning diameter: 630 mm, turning length: 1,250 mm, total length: 3,420 mm, total width: 1,750 mm, total height: 1,400 mm, type of input current: three-phase, overall weight: 5,200 kg, workpiece weight (max.): 6,000 kg, spindle mount: MK 6, Hello, We are offering a robust, well-maintained SUS 63/1250 lathe. All components are original, and it is in 100% working condition. The lathe was used sporadically in our workshop. It is in continuous operation, connected, and can be inspected. Manufacturer: TOS Iiedpfezxn R Eox Ahysh Turning length: 1250 mm Turning diameter (max.): 655 mm Turning diameter on the cross slide (max.): 390 mm Taper: Morse 6 Weight: 5.2 t Main motor: 22 kW (option to install a lower-power motor) Length/width/height: 3420/1750/1400 mm Load capacity: 6 t Spindle bore: 82 mm Rapid feeds Included: - 400 mm self-centering chuck - additional set of jaws - rotary steady rest - set of wrenches - chip/coolant tray - coolant pump - lamp - Technical documentation in Polish + mechanical and electrical diagrams We recently replaced the hydraulic oil with new oil.

Condition: used, Year of construction: 1986, Technical details: turning diameter over bed: 315 mm turning diameter over support: 200 mm turning length: 500 mm turning diameter over bed: 315 mm swing diameter over face slide: 200 mm center height measured in bed: 180 mm spindle passage: Ø 32 mm range of revolution per miute: 56...2.800 / nur only 6 step links-rechts U/min range of feed in x - axis: längs: 0,02..0,8 m/min range of feed in y - axis: plan: 0,01..0,4 m/min tailstock quill taper MT: MK 4 tailstock quill adjustment:: 140 mm total power requirement: 5,5 kW weight of the machine ca.: 2,0 t Isdpou Ix Hqjfx Ahyoih dimension machine xH: 2,1x 1,1 x 1,4 m -Workpiece pick-up via collet chuck -travels longitudinal slide= 580mm and cross slide=170mm -incl. tooling device lathe support -incl. change gears -steady rest Ø 100mm -fourfold tool holder The machines functionality is limited ! 6 speeds are currently selectable! (224/1800 ; 280/2240; 355/2800 rpm.) i.D. *

Condition: excellent (used), Swing over bed 400 mm Distance between centers 650 mm Spindle speeds 0-2500 rpm Misc. accessories MARCELS MASCHINEN CH Iiedpoq Dll Djfx Ahyjh

Condition: ready for operation (used), Year of construction: 1995, turning diameter over cross slide: 560 mm, spindle bore: 100 mm, turning diameter: 560 mm, turning length: 3,000 mm, Padovani Labor 275 E Electronic Teachin lathe Turning diameter above bed: 560 mm Passage: 100 mm Turning length: 3000 mm Transport dimensions (LxWxH): 490x140x160 cm Weight: kg Blue year: 1995 Options: Tools included Movie available! Ijdpfx Ahsrfw Nwoysih Location: Hamont-Achel, Belgium Call or mail for more information See also our other advertisements We are also looking for industrial machines throughout the year. Do you have redundant machines, mail them to us with pictures and information. Padovani Labor 275 E Electronic Teachin lathe Turning diameter above bed: 560 mm Tube diameter: 100 mm Turning length: 3000 mm Transport dimensions (LxWxH): 490x140x160 cm Weight: 0 kg Year of manufacturing: 1995 Options: Includes tools Movie available! Location: Hamont-Achel, Belgium Call or email for more information: Also view our other advertisements We are also looking for industrial machines all year round. If you have redundant machines, email them to us with photos and information. Padovani Labor 275 E Electronic Teachin Drehmaschine Drehdurchmesser over the bed: 560 mm Carriage door diameter: 100 mm Drehlänge: 3000 mm Transport abmessungen (LxWxH) 490x140x160 cm Weight: 0 kg Construction year 1995 Optionen: Inklusive Werkzeug Film verfügbar! Standort: Hamont-Achel, Belgium Für weitere Informationen rufen Sie an oder senden Sie eine E-Mail Sehen Sie sich auch unsere anderen Anzeigen an Wir sind auch das ganze Jahr über auf der Suche nach Industriemaschinen. Wenn Sie über redundante Maschinen verfügen, senden Sie uns diese per E-Mail mit Fotos und Informationen

Condition: good (used), Year of construction: 1986, turning diameter: 1,320 mm, turning length: 5,000 mm, Swing diameter: 1,320 mm Turning length: 5,000 mm Faceplate diameter: 1,250 mm Workpiece weight: 14 t Swing diameter over support: 900 - 950 mm Total power requirement: 45 kW Machine weight approx.: 18 t Iijdpfx Ahez Rnv Reyeh

Condition: good (used), Lathe, COLCHESTER Mastiff 1400, center distance approx. 100 cm. Isdsz Icakspfx Ahyoih

Condition: good (used), Lathe MEUSER M1L, serial number 36667, center distance approximately 100 cm. Isdpfxsz Ica Ds Ahysih

Condition: excellent (used), Manufacturer G.D.W. Type FD250 Control Conventional Working area Center height 125 mm Turning diameter over bed 260 mm Turning diameter over cross slide 156 mm Turning spindle Spindle bore 38 mm Spindle speed 60 - 3000 U/min ( stepless ) Travels Iodjw Aw H Hopfx Ahysih Longitudinal travel 80 mm Cross travel 80 mm Cross slide movable manually on the machine bed. Dimensions and weight Dimensions 1.300 mm x 700 mm x 1.400 mm Weight ca. 510 kg Options/accessories: - collet type chuck - collets - 3-jaw chuck with jaws - tool holders - digital readout system Heidenhain for 2-axis Under power in our warehouse.

Condition: used, Year of construction: 1960, turning diameter over bed 480 mm Ijdpoy Umb Djfx Ahyoih turning diameter over slide rest 260 mm turning length 1500 mm turning speeds 90 - 1120 U/min centre height 240 mm spindle bore 52 mm total power requirement 7,5 KW weight of the machine ca. 2,3 t dimensions of the machine ca. 3,0 x 1,3 x 1,5 m Engine Lathe - 3-jaw chuck (200 mm) - Quick-change tool post - Steady rest - Machine lamp - Chip tray - Center point

Condition: used, Year of construction: 1969, turning diameter over bed 500 mm turning diameter over slide rest 330 mm turning diameter in the gap 600 mm turning length 3000 mm bed width 505 mm spindle bore 72 mm spindle head DIN 55022 Gr. 8 taper in tailstock MK 5 Iodpfxoy Tyy De Ahyoih turning speed range 22,4- 1120 U/min power requirement 18,5 kW dimensions 5,3 x 1,75 x 1,53 m weight of the machine ca. 5,2 t used lathe in nice condition with digital scale - 2 axis digital scale - 4 jaw chuck Ø 250 mm - 3 jaw chuck Ø 260 mm - Multifix "C" toolholder system - some toolholders - steady

Condition: ready for operation (used), Year of construction: 1999, Lathe STANKO IMPORT 1M63H-1.5, year of manufacture 1999 with 2-axis digital display Heidenhain, faceplate 610 mm, Multifix holder size C with 2 tool pockets, with upper slide feed. Turning diameter: 630 mm Turning length: 1500 mm Spindle bore: 105 mm Iisdoz St Uuopfx Ahyoh Spindle speeds: 10 to 1250 rpm Spindle nose: DIN 11 Weight, approx. 5,000 kg. Coolant system, machine lamp. Machine documentation available. Good condition, ready for use. Further data can be found in the data sheets.

Condition: ready for operation (used), functionality: fully functional, total length: 3,000 mm, total width: 1,500 mm, total height: 1,750 mm, spindle speed (max.): 2,300 rpm, spindle speed (min.): 1 rpm, type of input current: three-phase, overall weight: 1,800 kg, The lathe runs and operates very well. A video of the machine in operation can be sent upon request. In addition, all possible manuals for this lathe are included. Damage: Iedpfx Aoz Dlbiohysih - A piece has broken off the tool holder, but this does not affect the operation. One connector on the rear is broken and needs to be replaced.

Condition: good (used), Diameter over bed: 500 mm Diameter over carriage: 270 mm Diameter of swing over cross slide: 700 mm Distance between centers: 1500 mm Diameter of tailstock spindle housing: 70 mm Travel of tailstock spindle: 180 mm Travel of cross slide: 300 mm Maximum workpiece weight: 300 kg Total power: 6.6 kVA Ijdpfx Ahezf Nd Hoyeih Machine weight: 1760 kg