Used Double Head Aseptic Filler For Bags for sale (22,916)

Condition: good (used), functionality: fully functional, Specification: • condition - used • main engine - 1.5 HP (380V power supply) Hodpfowc Tqzjx Aiksnk • engine speed - 1,450 rpm • 2 pumped spindles - 190 mm long • spindles fi 150 and fi 70 mm • overall dimensions - 95 x 30 x 105 cm (width x length x height) Additional information: • good technical condition, machine ready for further work • the photos show the actual condition of the item for sale • possibility of switching on and checking the device on site

Year of construction: 1977, condition: refurbished (used), I sell the double mitre saw Rapid DGS, year 1977. Tilting heads Drilling front heads on each side included Hnjdpfxod N Rb Do Aikek Very good condition. Available immediately.

Year of construction: 1998, condition: used, functionality: fully functional, Rapid dgl Hsdpfow I Hz Ajx Aikonk the saw blades automatically adjust to the desired dimension, control via touch panel, blade diameter 500 mm rotation speed 2710 cutting angle 45-90° cutting length approx. 3000 mm pneumatic clamping air requirement 200 NI the saw is in excellent condition, ready for immediate use, testing possible, invoice issued

Year of construction: 2015, condition: excellent (used), Reportedly very little used Plümat model BFL 851 automatic machine to fill and close flexible pre-sterilized IV-Bags under pharmaceutical conditions. Made in 2015, the line consists of frame with safety guard, manual bag feeding, printing station, automatic bag infeed, tube cutting station, filling station, tube welding station, tube cooling station, bag outfeed, control cabinet. The filler is a linear single lane system. The system is in compliance with GMP and FDA standards. - processable bag formats (2 tubes = free tube length 30 mm presealed with Vial stopper & 40 mm sealed by welding or open tube): 100 ml, 250 ml and 500 ml - capacity: 100 ml / 250 ml / 500 ml = 600 bags/hour - filling accuracy: 100 ml = ± 2.0 %, 250 ml = ±  1.0 % and 500 ml = ±  0.7 % - dosage range: 100 ml - 1000 ml - welding method used: heat contact welding Hnsdpslhqndjfx Aikok - filling system: SIEMENS S7 including counter card with mass-flow measuring system and pneumatic filling valves - controller: SIEMENS S7 Microbox with Profibus DP and TP 1500 touch terminal - power supply: 5.5 kW, 230/380 V, 50 Hz - compressed air supply: approximately 700 l/min, min 6 - max 8 bar - cooling water supply: approximately 4 l/min, temperature 18-21°C - weight: approximately 1350 kg (net) and 1750 kg (gross) - dimensions: 4263 (length) x 1050 (width) x 2140 (height) mm

Condition: good (used), Suhner Sumatic BEM 20 + Polydrill drilling unit Manufacturer: Suhner Model: Sumatic BEM 20 + Polydrill kW: 2,2 V: 380/220 ; 460/230 A: 5,7/9,8 ; 4,9/8,5 Hz : 50/60 Hjdpjd Huvqsfx Aikonk rpm : 940 / 1150 spindle adaptor : 13 mm 25-125 mm double spindle drill head

Condition: good (used), Year of construction: 2013, Work table can be extended by an additional 700 mm on both the left and right sides Width: 1850 mm Height: 1800 mm Depth: 1200 mm Hjdpfx Aiew Sdwiskjnk

Condition: used, The Elcos Double Head Paper Driller, manufactured by Elcos, is currently in stock and located in Germany. This machine features a drill distance of 45 to 150 mm and includes two adjustable heads. The delivery terms are FCA. Hnsdpfxsvfxzfe Aiksk Equipment: Details 2 head paper driller with adjustable heads Drill distance 45 - 150 mm

Year of construction: 1990, condition: used, Year of manufacture: Sep 2000 Hnsdpfxjvzyvpe Aikek New: No No guarantee. Please contact us if you can't find what you are looking for.

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. Hnjdpfxjxghngo Aikok To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. You can get machine with protective cover or without it as per your request preferences. Specifications Material width (mm) 416 The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: used, 6 head band saw IDC000078 - manufacturer: Forestor - 6 head band saw - complete with electric cabinet - complete with electric cabinet - With infeed table - with band sharpener - used for block cutting Hjdpfx Aist D A Sueksnk

Condition: used, mileage: 140,000 km, power: 110 kW (149.56 HP), first registration: 09/2019, fuel type: diesel, empty load weight: 2,170 kg, overall weight: 3,210 kg, axle configuration: 4x4, fuel: diesel, CO₂ emissions: 185 g/km, color: grey, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 5, total length: 5,330 mm, construction height: 1,820 mm, Equipment: ABS, air conditioning, airbag, all wheel drive, central locking, cruise control, electronic stability program (ESP), soot filter, traction control, trailer coupling, AUTOPARADIES in Berlin, Frank-Zappa-Str. 9A Mon-Fri 9:00 am - 5:00 pm Sat 10:00 am - 1:00 pm Website: --- Phone: VEHICLE FINANCING & TRADE-IN POSSIBLE TOYOTA HILUX 2.5 D-4D DoubleCab 4x4 with HARDTOP!!! * From first owner - German registration! * Air conditioning (AC), * 4x electric windows, * ABS, ESP, * Multifunction steering wheel, * On-board computer * Power steering, * Central locking with remote control, 3x keys, * 4x NEW M+S tires, * Additional heater (PowerHeat) * 4x4 all-wheel drive, * Differential lock, * Original Toyota alloy wheels, * Side steps, center armrest * Truck registration, Double Cab 5 seats, * Large LCD, MP3 CD radio sound system * Fog lights, center armrest, * Full Toyota service history, * New inspection and emissions test!!! * Tow bar (trailer hitch) for up to 3,200 kg! * From first owner – German registration! * Top condition!!! * Vehicle is in well-maintained condition * Please schedule a test drive appointment by phone * Subject to prior sale and errors * Call us!! We speak English. Hnedpfx Aox U Awboiksk * Financing * Trade-in * More offers available on our homepage

Condition: used, Year of construction: 1959, shaft length 10 - 130 mm wire diameter 5 - 10 mm length of wire blank max. 165 mm capacity/output with closed mould, adjustable 125 /min capacity/output with open mould, adjustable 75 /min Hnodjyx Ihgjpfx Aikjk Weight 8,0 t dimensions of the machine (WxDxH) 2,1 x 3,7 x 1,5 m combined double-pressure cold header press for jaws and closed moulds maximum wire diameter for high tensile bolts und carriage bolts 8 mm maximum wire diameter for mild steel bolts and rivets 10 mm wire diameter range 5 - 10 mm minimum and maximum shaft length 10 - 130 mm maximum length of wire blank 165 mm capacity/output with closed mould, adjustable - 125 St/min capacity/output with open mould - 75 St/min power requirement 11,0 kW mould dimensions - jaw dimensions 44 x 44 mm

Condition: used, Year of construction: 1966, shaft length 15 - 130 mm wire diameter 6 - 12 mm length of wire blank max. 170 mm capacity/output with closed mould, adjustable 100 /min capacity/output with open mould, adjustable 67 /min Weight 12,5 t dimensions of the machine (WxDxH) 2,3 x 4,0 x 1,6 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work free loaded to truck combined double-pressure cold header press for jaws and closed moulds maximum wire diameter for high tensile bolts und carriage bolts 10 mm maximum wire diameter for mild steel bolts and rivets 12 mm wire diameter range 6 - 12 mm Hnodpfxjv Sva Es Aikjk minimum and maximum shaft length 15 - 130 mm maximum length of wire blank 170 mm capacity/output with closed mould, adjustable - 100 St/min capacity/output with open mould - 67 St/min power requirement 15,0 kW mould dimensions - jaw dimensions 54 x 54 mm

Condition: used, functionality: fully functional, machine/vehicle number: M06I/9135, Offer Number: M06I/9135 Machinetype: double blow header Make: NATIONAL Type: 61LS Constr. year: diameter range: 6,35 mm shaft length under head: 70 mm cutting length: 95 mm Hsdpfxoyya N So Aikenk output pieces/min: 300 Location: Germany

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: M06L/8699, Offer Number: M06L/8699 Machinetype: double blow header Info: bushing cut-off Make: NATIONAL FORMAX Hjdpewi Svvofx Aikonk Type: FXH1M Constr. year: 1990 diameter range: 5 mm cutting length: 50 mm shaft length under head: 40 mm output - pieces/min: 450 Location: In our warehouse

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, machine/vehicle number: JC9093, total height: 3,300 mm, total length: 38,000 mm, total width: 115,300 mm, load capacity: 3,200 kg, We are offering this used Konecranes CXTD 3.2 t x 11.53 m double girder overhead crane with hoist trolley, year of manufacture 2015. Manufacturer: Konecranes Model: CXTD 3.2 t x 11.53 m Year of manufacture: 2015 Lifting capacity: 3.2 t Hjdpfx Aijyxz S Esksnk Span: 11.53 m Type: double girder overhead crane with hoist trolley Dismantling and collection to be handled by the buyer If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), functionality: fully functional, overall weight: 5,000 kg, total length: 7,860 mm, total width: 2,900 mm, load capacity: 5,000 kg, main lifting speed: 5,000 mm/min, TECHNICAL DETAILS Hoist designation: P 35 Lifting speed: 5 m/min FEM group: 1Cm Load capacity: 5 t Rope/chain: 16 mm Y/W dimension 1: 111 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 7,860 x 2,900 x 1,000 mm Net weight: 5,000 kg EQUIPMENT Wireless remote control Test book available Hjdpsyf Av Dofx Aikonk Note: Crane runways are not included in the scope of delivery or sale.

Condition: like new (used), functionality: fully functional, Year of construction: 2017, Darusín 30 ton double girder bridge crane with 14 meter crane runway, columns Hnsdpfx Aievlyd Iskjk manufactured by Darusín Kft, STREET. Year of manufacture: 2017. span: 9.1m lifting height: 7m crane runway length: 12.5 meters crane type: Street ZX1006 lifting speed: 1.3/0.3m /min travel speed: 20/2m /min voltage: 400v 50Hz 28A IP44 Control: 48 v with Crane Book

Year of construction: 1981, condition: used, Filling machine Manufacturer: Engler Type: automatic 24 head open piston filler Model: Schume 24 Capacity: +/- 9,000 pieces per hour Hnsdpeiby Rmjfx Aikok Filling volume: up to 800 ml Dimensions: L x W x H = 3.400 x 1.800 x 2.400 mm Weight: 700 kg Power supply: 380 Volt – 50 Hz – 1.1 kW Other: infeed product hopper with twin screw Tooling: 720 ml jars with TO-082 as-is or adjusted to customer needs

Condition: used, Double Girder Overhead Crane 40T DEMAG Manufacturer DEMAG Type Double girder overhead crane Industrial Applications Heavy lifting in manufacturing, metallurgy, mechanical workshops, logistics warehouses, and port terminals. Main Technical Specifications Hnodpfx Ajxfh Ikeikok - Lifting capacity: 40 tons - Span width: 28 meters - Structure: Double girder - Lifting system: DEMAG - Installation: Rail-mounted or on structural beams - Operation: Radio remote control or operator cabin - Use: Indoor or outdoor depending on industrial setup 🧩 Machine Usage The DEMAG 40T double girder overhead crane is designed for moving heavy loads across wide working areas. Its 28-meter span ensures full coverage of the operational zone, making it ideal for high-volume production and logistics applications. ⚙️ Features / Differentiators This model combines a 40-ton lifting capacity with a 28-meter span, offering high operational flexibility. The DEMAG lifting system ensures precise handling, maximum load stability, and proven durability for demanding industrial environments.

Condition: used, Double Girder Overhead Crane 50T DEMAG Manufacturer DEMAG Type Double girder overhead crane Industrial Applications Heavy-duty lifting in sectors such as steel manufacturing, shipbuilding, heavy industrial workshops, logistics hubs, or port installations. Main Technical Specifications - Lifting capacity: 50 tons - Span width: 28 meters - Structure: Double girder - Lifting system manufacturer: DEMAG - Mounting: Rail or beam-mounted - Operation: Radio remote control or operator cabin depending on installation - Use: Indoor or outdoor depending on setup Hodpfx Aoxfh I Doikonk - Reinforced frame for extreme load conditions 🧩 Machine Usage The DEMAG 50T double girder overhead crane is engineered for heavy lifting operations in highly demanding industrial environments. Its 28-meter span width allows for safe and precise handling of large and heavy parts, enhancing workflows in production, maintenance, or storage facilities. ⚙️ Features / Differentiators This model stands out for its exceptional 50-ton lifting capacity, 28-meter span, reinforced double girder structure, and DEMAG’s advanced lifting technology, offering robustness, reliability, and stability for extreme-duty applications. Perfect for facilities requiring continuous high-performance operation.

Condition: used, Double Girder Overhead Crane 35T DEMAG Manufacturer DEMAG Type Hnedpfx Aisxfh E Nekok Double girder overhead crane Industrial Applications Heavy-duty lifting and handling in industrial sectors such as metallurgy, heavy manufacturing, port logistics, production workshops, assembly plants, or large-scale warehouses. Main Technical Specifications - Lifting capacity: 35 tons - Structure: Double girder - Hoist and lifting mechanism by DEMAG - Mounting: Rail-mounted or cross-beam installation - Operation: Remote control or operator cabin (depending on setup) - Use: Indoor or outdoor depending on installation 🧩 Machine Usage The DEMAG 35T double girder overhead crane is designed for lifting extremely heavy loads in demanding industrial settings. It provides a robust and reliable solution to move large parts with accuracy and safety, improving internal logistics and material flow efficiency. ⚙️ Features / Differentiators This model stands out with its high lifting capacity (35 tons) combined with a double girder configuration, offering enhanced stability and optimal load distribution. The DEMAG lifting system ensures durability and high performance in intensive industrial environments.

Year of construction: 2012, condition: used, pasteurizer with pipe heat exchanger 600 l/h (up to 80°C) with automatic control storage tank for BiB with level control BaginBox filler with flow meter oil boiler 50kW mounted on braked trailer with tarpaulin Hnedo Hnnhjpfx Aikjk max. weight: 1350 kg

Condition: refurbished (used), Year of construction: 1988, CARLO SALVI 873/SV revised to NEW Diam. 9 mm max Length 100 mm max Length Cut 125 mm max PPM 250 Available at Calolziocorte (LC) - ITALY Delivery time: 8 weeks Revision made by HBR srl with: - New electrical system according to CE standards with inverter and PLC - New Lubrication System - New engine with disc, pulley and brake Hedpfx Ajittf Seikonk - New thread take-up roller pump - New belts - Rectification of all parts of the Central - Pins, Bushings and Nuts replacement - New bearings

Condition: ready for operation (used), Year of construction: 2017, Demag Overhead Crane Double-Girder Suspension Bridge Crane Inspection logbook available! Double-Girder Suspension Crane: Manufacturer: Liebl Kranbau GmbH Load capacity: 500 kg Year of manufacture: 2017 Crane track gauge: 4500 mm Length: approx. 6 m Width: approx. 5.13 m Chain Hoist: Manufacturer: Demag Model: DC-COM 5-500 Year of manufacture: 2017 Lifting capacity: 500 kg Fine lift speed: 1.1 m/min Main lift speed: 4.5 m/min Hook path: 4 m You are welcome to visit for an inspection. We can also organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided you have a valid VAT ID number. Subject to prior sale. Visit our shop and check out our other offers. Hnjdjx Eikyspfx Aikek Brand names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Technical data may deviate and errors in the item description can occur and are subject to change.