Used Dea Measuring Machine for sale (66,830)

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: type plate available, PRICE REDUCED by 2,000 EUR!!! Now 17,500 EUR instead of 19,500 EUR!!!!! Taylor Hobson Talyrond 265 roundness measuring system. Extremely accurate; it can measure the roundness of lenses, optics, pistons, turbine components, tubes, shafts, and also eccentricity, e.g., of cams on a camshaft or journals of a crankshaft. It is certainly also of interest to motorsport and tuning companies. The first photo is a "representative image" from a Taylor Hobson catalog, showing what it looks like, except for the computer. A newer, smaller form factor HP computer is included. Credpfx Aiozcqy Eoljd Max. diameter 350 mm Max. test piece height 500 mm (higher measurements are possible, up to a maximum of 1000 mm when measured in two parts, half and half...) Self-centering of the workpiece +/- 5 mm Max. weight of test piece 40 kg The system has been used very little and has had only two owners. The original owner, from whom I bought it, was an implant company in Hamburg. It was used in a "medically clean environment" and is extremely clean. It was never located in a dirty machine hall. The year of manufacture is estimated to be between 2002 and 2005. The Taylor-Hobson measurement software is, of course, included and runs on the supplied HP computer (without a password). Accessories are included, such as the original Taylor-Hobson desk, computer, monitor, and seven (7!) measuring probes, each of which is very expensive to purchase. A sample/sample lens (hemisphere) for calibration is also included! The very detailed operating manual is on the USB stick, and all circuit diagrams and functional diagrams are also included! The system will be shipped on two Euro pallets via a shipping company. It is already well secured on the pallets. The Talyrond 265 and the desk will be wrapped with bubble wrap, etc., and secured with stretch film to provide extreme protection during transport. The system itself is fixed with "transport safety screws." Shipping costs within Germany are included; I will cover them! So, within Germany: FREE SHIPPING! The measurement system should definitely be set up and commissioned by a Taylor Hobson service technician, who will then also recalibrate the system on-site. This is now recommended after a few years. Mistakes can be made during setup and commissioning. For example, some locking screws are installed for transport; if you forget to remove them, the system may be damaged when it starts up. This is a truly well-maintained, very accurate system that will continue to provide excellent service for many years to come!

Condition: not inspected (used), Mitutoyo Quick Scope QS250Z1J Measuring range (X×Y×Z): 200×250×100mm Resolution / length standard: 0.5μm / linear encoder Image transmission unit: 1/3" color CCD camera Measuring accuracy: XY: (2.5 + 6L/1000) μm Z: (5 + 6L/1000) μm Moving speed (max): 80mm/s Credezb U Anepfx Ailjd Acceleration/deceleration (max): 250mm/s² Glass size: 269 × 311 mm Maximum load capacity: 10kg Illumination: Contour illumination: 12V/30W halogen Reflective illumination: 12V/50W halogen Fiber optic ring illumination: 12V/100W halogen Main dimensions (W×D×H): 465 × 815 × 663mm Weight: 76 kg (169 lbs) Maximum power consumption: 970W Optical system 0.5X–3.5X (20X–137X monitor magnification), 8 steps, 7X zoom. Required operating software Mitutoyo Quick Scope QS250Z1J is the default operating and measuring software for QSPAK

Condition: used, Year of construction: 1978, machine/vehicle number: 27309654, x-travel:1600 mm y-travel:1000 mm z-travel:1300 mm Crodpfx Aecxxwreilod size of plate:1.500 x 800 x 120 mm capacity Y-axis:175-1210 mm capacity Z-axis:0-810 mm digital readout:Grundig 3-achs-Digimeß digital readout:235 x 80 x 130 mm total power requirement:0,04 kW weight of the machine ca.:2 t dimensions of the machine ca.:2,0 x 1,5 x 1,63 m 3-D coordinate-measuring machine with caste precision plate fine-scraped, with 4 feet 2000 x 1500 mm, approximately 20 different marking and testing probes, equipped with STIEFELMAYER type "A" guidance system

Condition: used, Year of construction: 1991, table length:1500 mm table width:1000 mm daylight:800 mm measurement range X =:1400 mm measurement range Y =:1000 mm measurement range Z =:800 mm weight of the machine ca.:1,6 t dimensions of the machine ca.:2,0 x 1,8 x 2,1 m Crsdocxxwuopfx Ailed 3-D coordinate-measuring machine, caste measuring plate with finely machined surface with T-slots, ZETT-MESS evaluation computer system, EPSON-statistical printer, machine equipped with temperature stabilizing heating and video camera, for TV-transmission of microscope-picture capture, additive cold light source with two flexible fibre optics, Sony-Mavica video printer, good condition

Condition: used, x-travel:600 mm y-travel:fest mm z-travel:650 mm weight of the machine ca.:ges. 0,124 t dimensions of the machine ca.:0,7 x 1,0 x 1,05 m Codpfx Aiocxxrgoljrd surface measuring, testing and evaluating unit for roughness and unevenness parameters with measuring post and feed device, incl. data logger with profile memory and full digital measured-value processing, fully programmable, evaluation according to different evaluation programs with single measuring run, reference-plane measuring on badly aligned, curved and tilted surfaces, automatic correction of height offset and tilt, measuring program with permanent storage and quick access, clearly arranged control elements, universal by plug-in program module for special functions, measuring post PST-Se, large black granite base plate with a 14 mm T-slot, table 650 x 450 mm, PRK feed device, adaptable precision scanning device for roughness, unevenness and form measuring, tracing length 1,5-60 mm, guidance accuracy 2 µm, tracing speed 0,5 and 0,1 m/s, automatically adjustable, return speed 1,5 m/s, standard - interval and terminal contact operation, extensive accessories, exchange calliper, calliper height-adjustable, calliper holder, calliper, etc.

Condition: used, Year of construction: 1983, machine/vehicle number: 16340283, table length:2000 mm table width:1000 mm weight of the machine ca.:2,9 t Cedpfx Ascxxzieilord Novalyth stone table with integrated T-groove, Grundig MZ 1030 measuring computer, 5 height-adjustable feet.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, measuring range X-axis: 500 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 400 mm, Equipment: type plate available, Coordinate measuring machine Mitutoyo EURO M 574 in excellent condition for sale. without computer and software year of manufacture: 1998 Crjdpfxsu E Uzxe Ailjd without PC!!! X - axis 500 mm Y - axis 700mm Z - axis 400 mm resolution: 0.0005 mm Measuring table material Granite Renishaw MH 20i probe head, Granite bed size 850 mm x 1160 mm, length standard: high-precision linear encoder centering microscope: mitutoyo CF-10 fixing and fine adjustment: one-touch air clamp for each axis continuous fine adjustment throughout the entire stroke range of each axis. effective size: 680x1160 workpiece clamping method: threaded insert M8X1.25 workpiece: Dimensions between columns 720 mm, maximum height: 480 mm maximum weight: 160 kg without PC Length measurement uncertainty ISO 10360 E = [3.5 + 4.0L/1000] µm in the temperature range of 18 ... 22 °C machine weight: 450/540kg

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, overall weight: 980 kg, measuring range X-axis: 700 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 500 mm, Coordinate measuring machine Coord3 ARES NT 7.7.5 Year of manufacture: 2014 Motorized indexable head Renishaw PH10M hand controller: Renishaw MCU LITE-2 MPEe accuracy: 2.5 µm + L/300 Credpfx Aou E U Hbsilsd Repetition accuracy: from 2.3 µm Measuring range: 700 x 700 x 500 (mm) Granite bed size: 1330x963.5x170mm Software: TouchDMIS 5.2 + dongle The Z-axis support column is made of silicon carbide, which increases rigidity. DC servo motors, air bearings on all axes, free-floating linear scales with 0.1 µm resolution.

Condition: used, Year of construction: 2001, functionality: fully functional, DEA Brown & Sharpe Mistral 07.07.05 Cordinate measuring machine. Working area 700×700×500 mm. Codoy N T Sxepfx Ailerd Equiped with Renishaw PH10M Probe Head Last calibrated on 05 Sep 2023. Ready for shipment.

Condition: good (used), Year of construction: 2010, functionality: fully functional, measuring range X-axis: 250 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, Software: QVPAK V10.005 Cedpfx Aju Sqmdeilsrd

Condition: like new (used), Year of construction: 2019, functionality: fully functional, measuring range X-axis: 1,000 mm, measuring range Y-axis: 1,500 mm, measuring range Z-axis: 800 mm, workpiece weight (max.): 1,600 kg, total height: 3,073 mm, total width: 2,652 mm, total length: 1,624 mm, overall weight: 2,570 kg, Equipment: documentation/manual, Our company offer for sale CMM COORD3. This rarely used machine was used by our company as a DEMO machine for technician education or at trade shows. The machine has a granite worktop. The individual axes are mounted on air bearings. Our company is able provide all necessary steps for moving and commissioning. COORD3 Universal 10.15.08 Measure dimension: X 1 000 mm; Y 1 500 mm; Z 800 mm Measure accuracy: MPEe = 2,0 + L/333 (L in mm) MPEP= 2,1 µm. Machine dimension: length 1 624 mm width 2 652 mm high 3 073 mm Measuring plate dimension: 1 000 x 2 330 mm Probing components: probing head RENISHAW PH10M measuring probe RENISHAW TP20 CMM controller: Metrologic ME5010 CMM keyboard: Metrologic ME471 Csdpfjwrm Tusx Ailsrd PC with minimal configuration: Windows 10, 64 bit, CPU - i7, RAM - 8 GB, HDD - 250 GB, graphic card NVIDIA FX QUATRO supporting Open GL 2.1, ports - USB, LAN (RJ45), VGA a HDMI. Display 1920 x 1200 DPI, VGA, HDMI. Measuring software: Metrolog X4 CNC

Condition: used, Year of construction: 1998, Technical details: x-travel: 870 mm y-travel: 870 mm z-travel: 800 mm Cjdpfxsu N At Rj Ailord table surface area: BxT: 1.260 x 1.050 mm distance between columns: 1.260 mm Laser measuring system with ZETT3D geometry program The table is made of granite and has 48 mounting holes M6 integrated. With interface module Renishaw type P14-2 On machine is currently installed a shaft with probe pin 60mm (without extension) Probeset Renishaw type PH-1 stored in a wooden box. Operation manually, operated control panel with 2 control knobs, keyboard and 4-line LCD display. Accessories: various probe tips and extension, calibration ball Printer Computer (Software Windows NT) Last calibration was at 06/2006. *

Condition: used, Year of construction: 2002, Technical details: x-travel: 505 mm Crjdpfx Aju S Izcoiled y-travel: 405 mm z-travel: 405 mm measuring range X-axis: 505 mm measuring range Y-axis: 405 mm measuring range Z-axis: 405 mm compressed air: 0,4 MPa voltage: 100/120/220/240 V / Hz total power requirement: 700 Watt machine weight approx.: 0,5 t dimension machine xH: 1,1 x 1,1 x 2,185 m further features: -it is a linear measuring system with resolution 0.0001mm -measuring speed X/Y+Z-axes 430 mm/s -acceleration X/Y+Z-axes 980 mm/s² -measuring table made of granite, size LxW: 638 x 860mm, with workpiece clamp -max. tool size height max. 545mm weight max. 180kg Equipment: -Measuring probe Renishaw TP200 -Computer Fujtsu - Siemens Scenic P; protection class IP30 -without measuring probe -Software available (USB Stick) *

Year of construction: 2010, condition: good (used), 2 aluminum tables for measuring machine Manufacturer: MEUSBURGER, Type: BST 5500, Year: 2010 Dimensions: Length 5500 mm, Width 1200 mm, Height 700 mm Codpfxeg Uf Ngo Ailord In good condition.

Year of construction: 2000, condition: used, Spare parts for measuring machine MORA Mü-Tos. Includes: 2 measuring stands, 2 measuring control units, and various other parts. Cedsiuiauspfx Ailord

Condition: good (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 14065, measuring range X-axis: 640 mm, measuring range Y-axis: 600 mm, measuring range Z-axis: 500 mm, workpiece weight (max.): 300 kg, total height: 2,320 mm, type of input current: AC, total width: 940 mm, total length: 1,040 mm, travel distance X-axis: 640 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, input voltage: 230 V, travel speed (max.): 60 mm/min, Equipment: type plate available, This machine was refurbished and brought up to its current state in 2020 for €10,600.00. For example: Aberlink joystick with color display. Precise coordinate measuring machine, CNC-controlled, with MH20i/Renishaw probe & software. Fully functional, immediately available. Measuring range X = 640 mm Measuring range Y = 600 mm Measuring range Z = 500 mm Function: CNC Resolution 0.5 μm Max. workpiece weight 300 kg Max. travel speed 600 mm/sec² Air supply min. 5 bar Cjdoy Iptcepfx Ailerd Dimensions L = 1040 mm Dimensions W = 940 mm Dimensions H = 2320 mm Type X-axis Y-axis Z-axis Accuracy Max. workpiece weight Year of manufacture 2012 Calibration 2023 The machine is ready for demonstration. The buyer must disassemble the machine and load it themselves.

Condition: used, Year of construction: 2016, measuring range X-axis: 300 mm, measuring range Y-axis: 250 mm, measuring range Z-axis: 150 mm, Coordinate measuring device for simple inspection of components directly on the production floor. Measurement routines can be visually displayed step by step for untrained operators. The device was purchased in 2016 but was used only briefly as it proved unsuitable for the intended application. It is in nearly new condition and comes in its original packaging. Manufacturer: Keyence Model: XM-1000 Year of Manufacture: 2016 Measuring range: 300 x 250 x 150 mm Repeatability: ±3 µm Measurement deviation: ±8 µm Equipment: - XM-1000 measuring system - XM-1500 measurement computer - XM-P1000 measuring probe - Several probe heads / balls - Documentation Credpfx Aszbvqyeilsd - Original packaging

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 400181806, Mitutoyo CV-3200H4 CONTOUR MEASURING CONTRACER; MFG: 2018, code no.: 218-482-10D, SN: 400181806, made in Japan. Expands measurement range while reducing workpiece interference. Mitutoyo’s newly designed detector arm lowers workpiece interference while expanding the measurement range in the Z1 axis (detector). Auto stop feature assures safety even during high-speed movement The detector includes a safety mechanism (auto stop upon collision) to assure measurement safety even during high-speed movement. If the arm is removed or shifts during measurement, the safety mechanism is triggered and stops the machine. Measuring range: X axis -100mm Measuring range: Z2 axis (column) travel range 3 - 60mm (±30mm in horizontal situation) Z2 axis (column) travel range: 3 - 500mm Detector (Z1 axis (detector unit)) Scale unit - Arc scale Resolution 0.04µm Stylus up/down motion: arc movement Measuring direction: both pulling and pushing directions Measuring face direction: downward or upward Cedewz Sxnjpfx Ailjrd Measuring force: 30mN (by adjusting weight) Stylus traceable range: Ascent 77°; Stylus traceable range: Descent 83° (with one-sided cut stylus: standard accessory); Drive unit Scale unit: Separate type linear encoder Z2 axis (column) ABS encoder Resolution X axis 0.05µm Resolution Z2 axis (column)1µm Drive speed X axis 0 – 80mm/s and manual operation Drive speed Z2 axis (column) 0 – 30mm/s and manual operation Measuring speed X axis 0.02 – 20mm/s; Straightness (when the X axis is horizontal) X axis 0.8µm/100mm X axis inclination angle: X axis ±45° Accuracy (20°C) CV-3200 X axis ±(0.8 + 0.01L) µm L = Drive length (mm) Wide range: 1.8µm/100mm Narrow range: 1.05µm/25mm; Accuracy (20°C) CV-3200 X Z1 axis (column) ± (1.4 + | 2H | /100) µm H = Measurement height from the horizontal position; External dimensions (W×D×H): Main unit: 756×482 ×1166mm External dimensions (W×D×H): Controller: 221×344×490mm External dimensions (W×D×H): Remote box: 248×102×62.2mm Mass: Main unit: 150kg Mass: Controller: 14kg Mass: Remote box: 0.9kg Operating temperature range: 15 – 25°C (within ±1K temperature fluctuation on calibration and measurement) Operating humidity range: 20 – 80%RH (with no condensation) Rvcunpih32 Storage temperature range: −10 to 50°C Storage humidity range: 5 – 90%RH (with no condensation) Price: 12.700 Euro + VAT, negotiable, Ex Works Oradea, Romania. Please make an offer. Irrtum, Änderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale /

Condition: excellent (used), – Mitutoyo dial test indicator, model 513 454 – accuracy 0.01 mm – lever type (test indicator) Csdpfx Aiew Rdi Aoljrd – antimagnetic version – Made in Japan – Mitutoyo magnetic base – model 7011SN – ON/OFF lock – robust, stable, with precise clamping mechanism – Made in Brazil – The set is fully functional. Stable guidance and precise readings. – Ideal for tool setup, run-out checking, and inspection measurements.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, TECHNICAL DATA Accuracy: from 3.0 + L/250 µm Measuring range X-axis: 3,500 mm Measuring range Y-axis: 6,000 mm Measuring range Z-axis: 2,000 mm Type of input current: Three-phase Equipment: Lighting, documentation/manual, nameplate available Details of the offer Description Portal measuring machine Manufacturer: Mora Type: U204-20-35-60 Codpfxeyr Simo Ailjrd Measuring software: Manufacturer Gemodek, Type MS10 Control panel on wheels Measuring and evaluation unit 2 PCs, Manufacturer HP, Type XW4300/Z220 2 monitors, 19/24", Roller shutter cabinet, telescopic drawer cabinet, Manufacturer Lista, W 1,000 mm, 7 drawers. Contents: Infrared measuring probe, Manufacturer Renishaw, Type PH10M, Calibration mandrel, accessories

Condition: ready for operation (used), Year of construction: 1992, X-axis: 700mm, Y-axis: 600mm, Z-axis: 450mm, measuring system: linear encoder, resolution: 0.001mm, max. workpiece weight: 500kg, max. workpiece dimensions: 500x500x500mm, compressed air connection: 5bar, mains connection: 220V/50Hz, weight: 1.15t, software: Mitutoyo GEOPAK 3 MAN, Mitutoyo SCANPAK 3 v3.01 MAN, equipment: PC with monitor, keyboard and control unit, measuring probe with accessory case, clamping devices and further accessories, operating manuals and documentation available, condition: fully functional, software runs perfectly, regularly serviced, calibration carried out before trade fair use, no known defects. An inspection on site is possible. Crsdpfezbl Nrsx Ailed

Condition: like new (used), Year of construction: 2025, operating hours: 30 h, functionality: fully functional, measuring range X-axis: 800 mm, measuring range Y-axis: 800 mm, measuring range Z-axis: 500 mm, workpiece weight (max.): 100 kg, warranty duration: 12 months, type of input current: AC, input voltage: 230 V, compressed air connection: 6 bar, Equipment: documentation/manual, type plate available, High-Precision Reference Measuring Center – Mahr OMS 800/500 HA Multisensor Coordinate Measuring Center with Extended Z-Axis Measuring Range Factory overhauled and modernized in 2025 – ready for immediate use. Technical Data Measuring range: 800 × 800 × 500 mm Sensors: - Optical sensor: Camera & laser (active measurement) - Renishaw TP200 touch probe (other options: TP20, SP25, etc.) - Camera system with 10x objective (optional: 1x, 5x, 20x) - 3D multisensor head MSH with transmitted light, incident light, laser & probe mount Software: OptiCheck3D 2025 – user-friendly, interactive programming Evaluation station: High-performance PC with Windows 11 Professional (64bit) Accuracy: - Length measurement uncertainty: E1 = 0.9 + L/600 µm - E3 = 1.9 + L/400 µm (L in mm) - Scale resolution: 0.1 µm Dimensions / Weight: - Size: 2360 × 1940 × 3300 mm - Weight: approx. 8090 kg - Max. workpiece weight: 50 kg (glass), 100 kg (granite), extendable - Traverse speed: max. 200 mm/s Device Details Model: Mahr MarVision OMS 800/500 HA CNC Design: High-precision, air-bearing multisensor measuring center Special feature: Active vibration damping (BILZ Bi Air) Condition: From laboratory use in precision measurement room, factory-refurbished in 2024 New price of comparable equipment: from approx. €650,000 Delivery time: approx. 4 weeks from order Highlights Credpoxbyxysfx Ailsd - Leasing option: 0% interest, without bank transaction - Factory overhaul 01/2024 with warranty & guarantee - Live demo: Available online or on-site - Optional service package: Worldwide transport, commissioning, calibration/certification, training, user instruction - 18 months free: Software update service & hotline support - Software: Full license OptiCheck3D (no subscription fees) - Remote service: Online board support directly at the measuring device - Custom modifications & retrofits on request - Latest 64-bit CNC controller & evaluation station (Windows 10/11) Supply & Environment - Compressed air: 6 bar ±0.1 bar (filtered, ISO 8573-1, consumption approx. 160 Nl/min) - Voltage: 115/230 V ±10%, 50/60 Hz ±5%, 2500 VA Environment: - Temperature: 20 °C ±1 K - Humidity: 40–70% RH - Vibrations: < 5 µm amplitude at < 5 Hz Service & Demo - Online demos available at short notice - Optional on-site demonstration at customer location

Condition: refurbished (used), Year of construction: 2025, operating hours: 12 h, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, workpiece weight (max.): 15 kg, warranty duration: 12 months, total height: 2,000 mm, type of input current: AC, total width: 1,000 mm, total length: 800 mm, overall weight: 800 kg, input voltage: 230 V, Equipment: documentation/manual, lighting, type plate available, Mahr Multiscope 400 Multisensor Measuring Device equipped with camera and Renishaw touch probe system Fully functional with factory acceptance before delivery! Comprehensive maintenance history Measuring range: 400x200x200 mm Maximum workpiece weight (glass plate): 15 kg Instrument weight: 800 kg Control cabinet weight: 90 kg External dimensions: 800x1000x2000 mm Maximum traverse speed: 150 mm/s Accuracy: U1=1.9 + L/200; U2=2.4 + L/150; U3=2.9 + L/100 (L = measurement length in mm) Csdpjw Slafsfx Ailerd Factory-refurbished premium multisensor measuring center with warranty and guarantee, rebuilt 2025. Includes the latest software update for Windows 10 (Windows 11 upgrade and OptiCheck3D 2025 available as options), including free lifetime software hotline and user support. Optional: Delivery via factory service or forwarding agent, worldwide. Optional: On-site commissioning & calibration Optional: Training service Online and on-site demos available with customer parts, application consulting by accredited Profitech metrology laboratories during project planning. Available complete service: – Delivery, installation, commissioning, acceptance according to standards, certification, and comprehensive acceptance documentation. Individual training and education programs also bookable as online courses. Creation of your measuring programs for direct operation with the device is also possible. Rental, lease-purchase, or financing possible directly via Profitech without any financial institution. The measuring device can be individually configured to customer requirements (within the EU). Reference number: 01814-1-ms400 (Please always include this with inquiries)

Condition: excellent (used), Year of construction: 2003, table length 900 mm table width 900 mm x-travel 457 mm y-travel 508 mm z-travel 406 mm control Brown & Sharpe weight of the machine ca. 250 t Codpfxex Szp De Ailsrd dimensions of the machine ca. 1300 x 1000 x 1600 m

Condition: excellent (used), Year of construction: 2000, x-travel 3000 mm y-travel 1400 mm z-travel 1600 mm Cjdpfoxb Eg Nex Ailjrd control DEA B3C-LC workpiece weight 4500 kg table surface area 4730 x 1465 mm tool taper RENISHAW PH10M weight of the machine ca. 4 t dimensions of the machine ca. 4 x 3,8 x 3 m