Used Cts Blending Machine for sale (65,260)

Condition: excellent (used), CTS Climate Chamber, Climate Testing Cell Here we offer a CTS climate chamber, climate testing cell. Available from mid-January 2023! Water-cooled Height adjustable! Footprint approx. (W x D x H): 3755 x 3470 x 2480 Test chamber approx. (W x D x H): 2500 x 2720 x 2200 Test chamber volume: approx. 15 m³ Temperature range: -40°C to +140°C Temperature deviation 1 K over time Average temperature change rate without heat radiation, measured in the supply air Heating: 2 K/min Lsdpfxjzd R A Uo Aftsrp Cooling: 1 K/min from +110 °C to -35 °C Climate tests: Temperature range: +10 °C to +90 °C Humidity range: +30% to +95% RH in the dew point range: +5°C to 89°C Temperature deviation 0.5 K over time Humidity deviation ±1 to ±3% RH over time Rated voltage: 400V 3/N, PE, 50 Hz Rated power: 53.5 KW Rated current: 92.3 A Compressor: S6J-16.2 + Chilled water unit Refrigerant: R404A Weight: 5500 kg Type: CW-40/16 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.

Year of construction: 2011, condition: excellent (used), CTS Type: T-30/950 Ex/I CTS Temperature Test Chamber, Explosion-Proof Control – 32-bit controller LCD control panel Digital display for set and actual values Numerical input of set values Error messages in plain text RS 232 interface Free switching channels for product-side test specimen activation Temperature Testing: Temperature range: -30°C to +80°C Temperature deviation: ±0.3 K over time Temperature change rate: Heating: 2 K/min Cooling: 1.5 K/min down to -10°C Thermal radiation: approx. 1000 W at +20°C approx. 200 W at -25°C Nitrogen inerting with residual oxygen monitoring With nitrogen inerting, the test chamber is first purged with a large flow rate of N2 until the Lrsdpszd Rzwjfx Aftsp o2 content drops below 3%. Then, it switches to a base flow amount (approx. 10% of the large flow rate). The nitrogen flow for the base amount is measured and displayed using a flowmeter and monitored via a limit switch. O2 monitoring continuously extracts gas from the test chamber via a flame arrestor and passes it over an O2 sensor which checks the residual oxygen content of the extracted air. Afterwards, the gas is returned to the test chamber via a second flame arrestor. The extraction pump is monitored by a volumetric flow meter. Additional details can be found in the Dräger user manual in the appendix. The gas system is currently deactivated! All technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without irradiation, and without additional equipment. Dimensions: Test chamber volume: 950 liters Test chamber dimensions: Height approx. 700 mm / Width approx. 900 mm / Depth approx. 1500 mm External dimensions: Height approx. 2400 mm / Width approx. 1270 mm / Depth approx. 3125 mm Operating data: Electrical connection: 400V +6/-10 %, 3/N, 50 Hz Nominal power: 21.6 kW Rated current: 36.5 A Protection class: IP 54 Condensate drain: non-pressurized, R 1/2" inner thread Sound pressure level:

Condition: excellent (used), CTS C-70/350 Climate Testing Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Type: C-70/350 Equipment Type: Climate Testing Chamber / Temperature and Humidity Testing Chamber Testing Chamber Volume: approx. 350 liters For sale is a used CTS C-70/350 climate testing chamber from an industrial application. The system is suitable for temperature and climate testing, environmental simulation, material testing, electronics testing, quality assurance, as well as research and development. Technical Data: Temperature Range: -70 °C to +180 °C Climate Operating Range: +10 °C to +95 °C Humidity Range: 10 % to 98 % RH Dew Point Range I: +7 °C to +94 °C Dew Point Range II: -10 °C to +7 °C Temperature Stability (over time): ≤ ±0.3 K Humidity Stability I: ≤ ±1.5 % RH Humidity Stability II: ≤ ±3 % RH Cooling Rate: approx. 3.5 K/min Heating Rate: approx. 3.5 K/min Max. Heat Radiation at +20 °C: approx. 3000 W Testing Chamber Dimensions: approx. 650 x 720 x 750 mm (W x D x H) External Dimensions: approx. 920 x 1665 x 1800 mm (W x D x H) Weight: approx. 550 kg Power Connection: 400 V, 3/N, 50 Hz Connected Load: approx. 7.1 kW Rated Current according to Nameplate: approx. 11.5 A Protection Class: IP22 Sound Pressure Level: < 58 dB(A) Refrigerant: Pre-cooling Stage: R404A, approx. 2.3 kg Cooling Stage: R23 Operating Pressure PS: 25 bar Test Pressure PT: 20 bar Equipment Touch Control Panel Viewing Window in the Door Interior made of Stainless Steel Testing Chamber Lighting Insert Grid made of Stainless Steel Feedthrough Ø 50 mm on the right, center Capacitive Humidity Measurement System Software Temperature Limiter Min. / Max. USB Port for Data Storage Ethernet Interface RS232 Interface Air-cooled Design Documentation / Operating Manual Service / Inspection Condition: Used Optical Condition as shown in the pictures Normal signs of wear and tear from use and storage Lredpfx Ajzd D Nzjftsp Scope of Delivery CTS C-70/350 Climate Testing Chamber Insert Grid Control Panel / Controller Documentation / Operating Manual Accessories as shown in the pictures Inspection possible after prior appointment. Shipping or freight shipping possible. Scope of delivery as shown in the pictures. Subject to changes and errors in the technical data as well as prior sale.

Condition: excellent (used), CTS Climate Testing Chamber C-70/1000-S Device Data: Manufacturer: CTS GmbH Type: C-70/1000-S Design: Climate testing chamber / Environmental simulation chamber Cooling: Water-cooled Description: Used CTS climate testing chamber for precise temperature and climate testing. Suitable for material, component, and reliability testing. Used in industry, research, development, and quality assurance. Temperature and Climate Data: Temperature range: -70 °C to +180 °C Temperature change rate (heating): approx. 2.5 K/min Temperature change rate (cooling): approx. 2.5 K/min Humidity range: 10 % to 98 % RH Dew point range I: +7 °C to +94 °C Dew point range II: -10 °C to +7 °C Electrical Data: 400 V / 3/N / 50 Hz Power: 9.7 kW Current: 17.9 A Protection class: IP 22 Refrigeration System: Refrigerant: R404A / R23 Pre-cooling stage: R404A, 2.3 kg Cooling stage: R23, 0.86 kg / 15 bar Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Equipment: CTS control panel with LCD display Lrjdey Iam Hspfx Aftep Program operation Digital setpoint/actual value display Observation window in the door Stainless steel test chamber Test specimen protection / Temperature limiter Interior lighting Side cable entry points Entry points approx. 50 mm and approx. 125 mm RS232 interface according to documentation Digital outputs for test specimen control Mobile design on rollers Dimensions: Test chamber volume: approx. 1000 liters External (W x D x H): approx. 2245 x 1270 x 1950 mm Installation dimensions (W x D x H): approx. 2350 x 1290 x 2000 mm Weight: Test chamber: approx. 1000 kg Condenser: approx. 120 kg Documentation: Declaration of conformity Test certificates Operating manual Messages and digital channels Installation plan Quick start guide Humidity diagram Scope of supply: CTS Climate Testing Chamber C-70/1000-S Documentation, where available Scope of supply as shown in the images Functional test Refrigerant service Leak test Condition: Used. Condition, see images. Inspection possible by arrangement. Loading and transport can be organized upon request. Subject to changes and prior sale. If you have any questions, please do not hesitate to contact us.

Condition: excellent (used), CTS Temperature Shock Test Chamber Type: TSS-70/32 Manufacturer: CTS Klima Temperatur Systeme Design: Air-cooled For sale is a CTS temperature shock test chamber for temperature change and shock testing in industry, research, and development. Lodey I Ntcjpfx Aftsrp Technical data: Test chamber volume: approx. 32 liters Max. test specimen weight: approx. 10 kg Temperature ranges: Hot chamber: +50 °C to +200 °C Cold chamber: -80 °C to +100 °C Performance data: Heating rate: approx. 6 K/min Cooling rate: approx. 6 K/min Temperature change rate: up to approx. 100 K/min Changeover time: < 10 seconds Temperature deviation: ±1 K / ±2 K Electrical data: Connection: 400 V / 3/N / 50 Hz Rated power: approx. 9.7 kW Rated current: approx. 15.4 A Fuse: 16 A slow-blow Protection class: IP 22 Refrigerant: R404A: 2.3 kg / R23: 0.90 kg Pressure data: Operating overpressure: 25 bar Test pressure: 27.5 bar Dimensions: approx. 1325 x 2012 x 1820–2020 mm (W x D x H) Weight: approx. 650 kg Further data: Sound pressure level: < 58 dB(A) Compressed air connection: 1/4" male Equipment: Two-chamber system (hot / cold chamber) Digital CTS control Display / control panel Program operation Operating hour counter Observation window Interior lighting Temperature limiter Test specimen protection RS232 interface Documentation: Declaration of conformity available Test certificates available Operating manual available Wiring diagram available Piping diagram available Quick start guide available Safety data sheets available Note: The table shown in the photos is not included in the sale. Condition: Used Optical condition see pictures Scope of supply as shown in the pictures Inspection possible by appointment. Loading can be organized. Commercial sale (Changes and errors in the technical data and information are reserved!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), CTS Temperature Shock Test Chamber TSS-70/350-A Device Data Manufacturer: CTS GmbH Type: TSS-70/350-A Year of Manufacture: 10/2017 Design: Temperature Shock Test Chamber Refrigeration Unit: Water-cooled Description Used temperature shock test chamber from CTS. Suitable for shock and cycle temperature tests. Application in industry, research, and quality assurance. Application Areas Material testing Lrsdpjy H Hk Asfx Aftep Aging tests Electronics and component tests Temperature shock tests Automotive and quality control Temperature Ranges Hot chamber: +50 °C to +220 °C Cold chamber: -70 °C to +100 °C Electrical Data 400 V / 3/N / 50 Hz Power: 19.8 kW Current: 46.5 A Connection: CEE 63A Refrigeration System Pre-cooling: R452A, 7.2 kg Cooling stage: R23, 2.8 kg CO₂ equivalent: 15.41 t / 41.59 t Water-cooled Pressure / Protection PS: 25 bar PT: 27.5 bar IP 54 Equipment Touchscreen control Microprocessor control Program operation Setpoint/actual value display (digital) 2-zone system Mobile frame for quick changeover Viewing window Integrated control cabinet Cooling water connections Technical Design Separate hot and cold chambers Stainless steel test chamber Industrial design Dimensions Dimensions: External dimensions (H x W x D): approx. 2450 x 2160 x 2200 mm Internal dimensions (H x W x D): approx. 610 x 850 x 680 mm Weight: approx. 2500 kg Documentation Declaration of Conformity Test certificates Operating manual Wiring diagram and piping diagram Spare parts list Service before delivery (optional) Functional test Refrigerant service Leak test Test run with protocol Condition Used. Optical condition, see pictures. Scope of Delivery Test chamber TSS-70/350-A Documentation (if available) Inspection possible by arrangement. Loading and transport can be arranged on request. Subject to change and prior sale. If you have any questions, please do not hesitate to contact us.

Condition: good (used), Schmedt PraLeg XL 18-60 Case in machine + Schmedt PraForm 21-50 Press Manufactured in 2022. Schmedt PraLeg XL 18-60 Book Hanger Machine in good condition, ready to operate. The machine hangs a book block into a prepared hardcover. Two gluers, smooth glue thickness adjustment. Format: Block height: 80 – 450 mm Block width: 110 – 450 mm Block thickness: 2 – 80 mm Production rate: approx. 200 – 300 pcs/h Power supply: 230V Weight: 300 kg Made in Germany. Schmedt PraForm 21-50 Book Press Book press with groove cutter. Made in Schmedt, Germany. The machine is in very good condition, ready for production. Lrodpfxjzdazbe Aftep Technical specifications: Maximum format: 420 x 520 x 100 mm Weight: 220 kg Power supply: 230 V + compressed air. Price is for a set of two machines.

Condition: good (used), EBA 551-06 Paper Cutting Machine The machine is in very good condition. A high-performance, precise hydraulic cutter – for small and medium-sized printing houses, bookbinding shops, and digital printers. Equipped with programmable controls, it is designed for low-volume, frequently changing orders. Control: Program storage capability Data entry via a decimal keypad Electronic digital display with 1/10 mm accuracy Electronic handwheel with stepless rear stop speed adjustment Machine diagnostics with on-screen error indicator Program start with the „start” button MM/INCH switching Hydraulic knife and pressure beam drive Photocells Cutting line Side tables Foot pedal for pressure adjustment Safety guards on the rear table Technical data: Cutting length: 550 mm Infeed depth: 570 mm Stack height: 95 mm Front table depth: 460 mm Minimum final offcut: 32 mm Power supply: 230 V / 50 Hz Lrjdpfx Afozdayqetep Power: 1.5 kW Weight: 350 kg The set includes: spare knife, cutting stick, operating tools, instructions.

Condition: good (used), Minipack Torre Mailbag Packaging Machine This machine is in excellent condition and ready for production. The photos show the actual product. Made in Italy. Manufacturer’s description: The Mailbag is a compact digital bagging system, ideal for packaging brochures, newspapers, and books. Powered by a single-phase power supply (airless), it’s easy to use with wheels, and the system can be easily moved from one location to another with minimal fuss. A product, such as a magazine, inserted into the feeder activates a photocell, detects the package, and moves the bag and product into the sealing system. A combination of transverse and longitudinal seals closes the package and creates a seal for the next product. The finished package gently falls into the receiving hopper at the bottom of the machine. Technical data: Production speeds, depending on package and film dimensions (up to 1200 pph) Min. package width: 160 mm Maximum package width: 250 mm Min. package length: 100 mm Maximum package length: 360 mm Maximum film thickness: 30 microns Machine dimensions: 600 mm x 840 mm x 1050 mm Weight: 144 kg Power supply: 230V Power consumption: 0.6 kW Lrodozdavxepfx Aftjp

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 2,300 h, machine/vehicle number: 921R50022874, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser source manufacturer: MAX photonics, laser power: 2,000 W, pipe diameter (max.): 200 mm, pipe length (max.): 6,000 mm, working length: 6,000 mm, travel distance X-axis: 6,500 mm, travel distance Y-axis: 360 mm, feed rate X-axis: 120 m/min, cutting speed: 1,600 mm/min, positioning speed: 120 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.03 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 14,700 kg, total length: 12,500 mm, total width: 4,700 mm, total height: 2,600 mm, tube wall thickness (max.): 6 mm, Equipment: cooling unit, emergency stop, fume extraction, safety light barrier, Laser machine for sale, in very good condition. It has a new laser source that is only a few months old. The machine has few operating hours and has been regularly maintained and is in daily use. It is possible to inspect and test the machine immediately upon arrangement. NOTE: Capable of cutting round, square, rectangular, oval, D-shaped, and U-shaped tubes. Lsdszg D I Aepfx Aftorp

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: electric, working width: 1,600 mm, installation height: 430 mm, throat depth: 400 mm, operating speed: 50 mm/s, reverse speed: 200 mm/s, back gauge speed R-axis: 200 mm/s, overall weight: 3,500 kg, total length: 2,350 mm, total width: 1,700 mm, total height: 2,220 mm, power: 17.3 kW (23.52 HP), warranty duration: 24 months, Equipment: CE marking, Model: GB-4016E Bending pressure (KN): 400 Bending length (mm): 1600 Distance between columns (mm): 1320 Maximum opening height (mm): 430 Slider stroke (mm): 180 Throat depth (mm): 400 X-axis stroke (mm): 400 X-axis speed (mm/s): 400 R-axis stroke (mm): 140 R-axis speed (mm/s): 200 Z-axis stroke (mm): 1040 Lrodewzqx Hjpfx Aftsp Z-axis speed (mm/s): 400 Machine power (kw): 17.2 Dimensions (mm): 2090*1265*2290 Weight (kg): 3500

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser hours: 10 h, laser power: 12,000 W, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Section Steel Laser Cutting Machine Lrodpfxow I Ilis Aftop Bevel cutting highly enhances competitiveness Smart cutting head equipped with professional Acu3D rotary axis Achieves multi-directional, multi-angle 3D cutting (Web beveling, R-corner cutting, V bevel, Y bevel) Versatile cutting Sheet, tube, and section steel cutting in one One-stop processing workflow, seamlessly integrated with TEKLA Easily complete drawing import - nesting & programming - process setup - material alignment - cutting

Condition: new, functionality: fully functional, machine/vehicle number: RM310119, feed length X-axis: 787 mm, feed length Y-axis: 508 mm, feed length Z-axis: 584 mm, quill diameter: 105 mm, table width: 355 mm, table length: 1,372 mm, type of input current: three-phase, rotational speed (max.): 5,000 rpm, rotational speed (min.): 40 rpm, table load: 600 kg, overall weight: 2,390 kg, input voltage: 400 V, workpiece weight (max.): 600 kg, warranty duration: 12 months, input current: 22 A, input frequency: 50 Hz, Built-in programming cycles: Position: Spindle positioning Drilling: Simple holes, holes on a circle Milled holes: Holes made by milling cutter – straight and circular Arcs: Arcs in XY, XZ, and YZ plane Pockets: Rectangular, circular, irregular Island: Milling rectangular, circular, and irregular islands Profile: Rectangular, circular, irregular Helix: Spiral ramping Milling: Straight lines along X, Y, or Z axis or any combination Engraving: Text engraving Lsdpfx Aowtnxnjftjrp Thread cutting: Thread cutting with tap Thread milling: Thread milling with form cutters Copying: Copying a series of cycles Mirror: Mirror image Rotation: Rotation around an axis Repetition: Repetition of a series of cycles G-code editor Clipboard

Condition: used, Year of construction: 2022, PRODUCT TYPES: • Four side seal pouches • Quad seal pouches • Side seal pouches • Transverse zipper pouches • Gusset pouches • Bottom stick hole pouches • Micro-perforated pouches • Handle hole pouches • Round corner pouches MATERIALS: • LDPE • CPP • MCPP • AL • Nylon • PP • Laminated film structures MAIN TECHNICAL INFORMATION: Material thickness: 60–250 μm Max. web width: 1300 mm Max. roll diameter: 800 mm Core diameter: 3” and 6” Max. pouch width, quad seal: 400 mm Max. pouch length: 1000 mm Eye mark accuracy: ±1 mm Machine speed: 15–65 pcs/min Material speed: 40 m/min Main power: 400V, 50Hz, 3 phase Installed power: 100 kW Machine weight: approx. 18,000 kg Machine size: 33,500 × 4,200 × 1,800 mm POUCH SIZE RANGE: Quad seal / side welded width: 180–400 mm Gusset depth: max. 80 mm Minimum gusset depth: 30 mm Bag length: 360–1000 mm UNWINDING SECTION: • Air shaft unwinding • Magnetic powder brake • Dancing roller tension control • Servo-driven unwind system PERFORATION SYSTEM: • Micro perforation unit • Wheel type perforation • Additional perforation holes • Same type as existing machine configuration FOLDING SYSTEM: • Four side seal / quad bag folding wheel section SEALING AND COOLING SYSTEM: Mechanical press sealing system: Quad seal longitudinal sealing: 2 groups, 1010 mm Quad seal longitudinal cooling: 2 groups, 1010 mm Cross sealing station: 6 sets No. 1: K-seal No. 2: Gusset filling sealing No. 3: Cross seal, 740 mm length / 60 mm width No. 4: Cross seal, 740 mm length / 60 mm width No. 5: Cross seal, 740 mm length / 60 mm width No. 6: Cross cooling, 740 mm length / 60 mm width Additional 5 mm sealing section, upper and bottom PUNCHING SYSTEM: Tear slit / notch puncher 3-hole handle puncher Handle puncher: 20 × 80 mm, 3 sets Hole sizes: • 3 holes Ø20 mm • 20 × 80 mm • 24 × 77 mm Round corner puncher: 2 sets Puncher supports: 3 sets Bottom stick hole puncher: • 12 mm, 8 pcs • 16 mm, 8 pcs Vacuum system for punch waste removal DRIVE SYSTEM: Main motor: 3.5 kW Back draw roller servo: 3.5 kW Front draw roller servo: 3.5 kW Middle draw roller servo: 3.5 kW Longitudinal independent sealing servo: 5 kW × 2 Unwind servo motor: 1.5 kW × 1 / 3.5 kW × 1 Tension control servo: 3.5 kW × 1 Flying knife servo: 1.5 kW × 1 Manipulator sucker drive: 0.75 kW × 1 Finished product carrier counting drive: 0.75 kW × 1 CONTROL SYSTEM: • PLC control • 10” touch screen Lrjdpfx Afezf Nk Tstsp • Suitable for printed and unprinted bags • 16 temperature control zones • Individual temperature display • Temperature tolerance: ±2°C • High-sensitive eye mark sensor • Adjustable eye mark position STACKING SYSTEM: • Simple type stacking table • Static removal system • Automatic stop when machine stops • Alarm for bag output range: 25–100 bags • Step motor belt control • Belt width: 60 mm • Adjustable batch and belt length SAFETY SYSTEM: • Safety light curtain • Emergency pulling rope • Emergency buttons every 2 meters • Individual emergency control INCLUDED OPTION: ZIPPAK transversal zipper attachment Transversal zipper unwinder and rewinder Innolock / Velcro zipper capability Tooling for 3 zipper sizes: • 180–220 mm • 230–300 mm • 310 mm Micro-perforation holes Bottom stick hole puncher Trim rewinders Chiller

Condition: new, mileage: 1 km, power: 50 kW (67.98 HP), gearing type: automatic, fuel type: diesel, overall weight: 2,850 kg, lifting power: 1,000 kg/m, drive condition: 100 %, chain condition: 100 %, Year of construction: 2024, Equipment: additional headlights, cabin, GG010 The new Günter Grossmann GG010 LOADER The Günter Grossmann GG08 loader (1000 kg payload) is brand new. Günter Grossmann is a high quality machine made for a European company. Lrodpsiit Erofx Aftop The charger is very strong and can work under all conditions. The charger is very nice. The control panel is very nice and clear. The cabin is soundproof, insulated, equipped with heating, very comfortable and beautifully glazed, allowing safe and comfortable work. The machine has a very durable construction. The machine is equipped with a quick coupler, which makes it possible to change accessories quickly without leaving the cab. Additional equipment: 4 in 1 bucket, crocodile grab, crocodile grab for trees, straw or silage. Price 14,550 euros (excl. VAT) Included as standard GG010 loader + bucket + pallet fork + quick coupler Model 1000 kg SPECIFICATIONS Model: GG10 Brand: Günter Grossmann Engine: Changchai 390 Engine: In-line setup, water-cooled four-stroke diesel engine Engine power: 50 hp Speed: 2200 r/min (rpm) Steering system: Cycloid full hydraulic steering system: BZZ-80 System Pressure: 10MPa Service brake: Hydraulic four-wheel brake with staggered shoes Parking brake: manual Tire: 10-16.5 Wheelbase: 2170mm Track: 1285 mm MEASUREMENTS Total length (bucket at ground position): 41--mm Ground to top of cab: 2530 mm Total width: 1600 mm WORKING RANGE Bucket capacity: 0.5 m3 Bucket width: 1600 mm Max. Height Breakout Force: 28KN Rated load: 1000 kg Operating weight: 2850 kg Drive means: four-wheel drive Min turning radius: 4600 mm ACCESSORIES Bucket 4 w 1: 1050 Eur Pitchfork: 1050 Eur Pallet fork: 650 Eur Quick coupler: 600 Eur Drill: 1400 Eur Bale clamp: 950 Eur Grass clip: 950 Eur Lawnmower: 1450 Eur Snowplow: 1375 Eur

Condition: excellent (used), CTS Climate Test Chamber C-70/600 Type: C-70/600 Manufacturer: CTS Klima Temperatur Systeme Design: Air-cooled For sale is a CTS climate test chamber for temperature and climate testing in industry, research, development, and quality assurance. Condition / Display: Used unit, optical condition see pictures. Display in manual operation / stop. Temperature actual value: 16.59 °C Temperature setpoint: 5.00 °C Humidity actual value: 39.7 % RH Water supply: 11.0 l Special feature: Extended temperature range up to +210 °C (many standard versions only up to +180 °C) Technical data: Temperature range: -70 °C to +210 °C Humidity range: 10 % to 98 % RH Dew point range: -10 °C to +94 °C Temperature change rate: approx. 2.5 K/min (heating/cooling) Test chamber volume: approx. 600 liters Electrical data: Connection: 400 V / 3/N / 50 Hz Rated power: approx. 9.0 kW Rated current: approx. 14.6 A Protection class: IP 22 Refrigeration system: Refrigerant: R452A / R23 Cascade refrigeration system for low temperatures down to -70 °C Pressure data: Operating overpressure: 25 bar Test pressure: 27.5 bar Lrsdpsy I Tdxsfx Aftsp Test chamber: Internal dimensions: approx. 850 x 850 x 830 mm Dimensions: approx. 1900 x 1115 x 1850 mm Weight: approx. 800 kg (depending on equipment) Equipment: Observation window Stainless steel test chamber Digital setpoint/actual value display Test specimen protection / temperature limiter VE water connection Condensate drain Pipe penetrations RS232 interface Digital outputs for test specimen control Scope of supply: CTS Climate Test Chamber C-70/600 Scope of supply as shown in the pictures Service / Preparation: Functional check and replacement of necessary components Refilling with legally compliant refrigerant (if necessary) Leak test with certificate Documented test run Other: Inspection possible by arrangement Loading can be organized Commercial sale (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), CTS Climate Testing Chamber C-70/600 Device Data Manufacturer: CTS GmbH Type: C-70/600 Model: Climate Testing Chamber Cooling: Air-cooled Description Used climate testing chamber from CTS. Suitable for temperature and climate testing. Application in research, development, and quality assurance. Operating Status Display: Manual operation / Stop. Temperature: 16.59 °C (Actual) / 5.00 °C (Set). Humidity: 39.7 % RH. Water supply: 11.0 l. Technical Data Temperature range: -70 °C to +180 °C Humidity range: 10 % to 98 % RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical Data 400 V / 3/N / 50 Hz Ledpfjy H H D Ajx Afterp Power: 8.7 kW Current: 14.8 A Protection class: IP 22 Refrigeration System Refrigerant: R404A / R23 Cascade refrigeration system Low-temperature operation down to -70 °C PS: 25 bar PT: 27.5 bar Equipment Observation window Stainless steel test chamber Digital setpoint/actual value display Test item protection / Temperature limiter Water connection (demineralized water) Condensate drain Pipe penetrations RS232 interface Digital outputs Dimensions Internal: approx. 850 x 850 x 830 mm External: approx. 1900 x 1115 x 1850 mm Weight approx. 600 kg Scope of Delivery CTS Climate Testing Chamber C-70/600 Documentation (if available) Functional Test Refrigerant service Leak test Test run with protocol Condition Used. Condition as shown in the pictures. Inspection possible by appointment. Loading and transport can be organized upon request. Subject to change and prior sale. If you have any questions, please do not hesitate to contact us.

Condition: excellent (used), CTS Climate Testing Chamber C-70/600 Device Data Manufacturer: CTS GmbH Type: C-70/600 Design: Climate testing chamber Lrsdpfx Aey H Hl Hjftsp Cooling: Air-cooled Description Used climate testing chamber from CTS. Suitable for temperature and climate tests. Used in industry, research, and quality assurance. Technical Data Temperature range: -70 °C to +180 °C Humidity range: 10 % to 98 % RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical Data 400 V / 3/N / 50 Hz Power: 8.7 kW Current: 14.8 A Protection class: IP 22 Refrigeration System Refrigerant: R404A / R23 Cascade refrigeration system Low-temperature operation down to -70 °C PS: 25 bar PT: 27.5 bar Equipment Observation window Stainless steel test chamber Digital setpoint/actual value display Test item protection / Temperature limiter Water connection (demineralized water) Condensate drain Pipe penetrations RS232 interface Digital outputs Dimensions Internal: approx. 850 x 850 x 830 mm External: approx. 1900 x 1115 x 1850 mm Weight approx. 600 kg Scope of Delivery CTS Climate Testing Chamber C-70/600 Documentation (if available) Service prior to delivery (optional) Functional test Refrigerant service Leakage test Test run with protocol Condition Used. Visual condition, see pictures. Inspection possible by arrangement. Loading and transport can be organized upon request. Subject to changes and prior sale. If you have any questions, please do not hesitate to contact us.

Condition: good (used), Year of construction: 2005, machine/vehicle number: SBLG 0005, Proto Trax VL 3 jaw SMW chuck 11KW Spindle motor 104mm spindle bore Spindle speeds 30-1800RPM 350mm swing over cross slide Lsdpfx Afezb Ipzstsrp X axis travel 280mm Z axis travel 1650mm 1750 mm between centres Coolant pump and tank

Condition: used, Thread rolling machine UPWS 25. Lsdpfx Afozd Rf Notjrp

Condition: excellent (used), Year of construction: 2021, Traverses X Y Z: 660 x 450 x 500mm, Table size 720mm x 420mm, Lsdpfx Aezbituoftorp table load 500kgs, spindle speed 12,000rpm, spindle motor power 28Hp, Siemens 828D Control with Shopmill, rapid feed XYZ axis 24m/min, Spindle taper BT40, 12 station ATC

Condition: good (used), Year of construction: 2012, Traverses X Y Z: 785 x 470 x 530mm, Table size 900mm x 500mm, spindle speed 8000rpm, spindle motor power 11kW, Ledpfsq R Tnzjx Aftorp Prototrak, rapid feed XYZ axis 20m/min, Spindle taper BT40, 16 station ATC, swarf auger.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Shenzhen ICM Technology Development Co., Ltd., controller model: 880W02, pipe diameter (max.): 38 mm, pipe length (max.): 3 mm, tube wall thickness (max.): 2 mm, bending angle (max.): 190 °, bending radius (max.): 200 mm, bending radius (min.): 2 mm, mandrel length: 150 mm, number of axes: 2, table length: 3 mm, overall weight: 1,300 kg, total length: 3,900 mm, total width: 900 mm, total height: 1,400 mm, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, oil tank capacity: 80 l, number of digital displays: 1, warranty duration: 36 months, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, quick-change device, Full Automatic Pipe Bending Machine DW38CNC-2A-1S Equipped with a touchscreen and CNC control system; capable of storing up to 500 sets of parameter groups. Features a rebound compensation setting program, with built-in confidentiality protection for programs and processing data. Servo control is adopted for corner bending, pipe bending and material feeding functions. The operating system is protected by passwords and physical keys, and supports production quantity & runtime records for efficient production management. Comes with slow bending and slow core pulling functions. Fault messages are displayed on the screen to help operators troubleshoot problems promptly. Lrodpfx Ajy Uuw Teftop Touchscreen This pipe bender is equipped with a Weinview industrial touchscreen for its operation interface, which delivers an intuitive operation experience and allows new operators to get started quickly. You can directly edit the pipe bending process parameters on the interface, such as feeding distance, rotation angle and bending angle, and separately set the running speed for each step. During operation, the interface displays real-time axis positions, bending progress and production cycle, and automatically counts total output and shift output to help you manage production efficiency effectively. It also supports manual single-step debugging, automatic continuous operation, program editing and equipment parameter setting. Different modes can be switched with one click, making it convenient for machine trial runs and mass production alike. Hydraulic solenoid valve manifold This integrated hydraulic solenoid valve manifold serves as the control center of the CNC pipe bender's hydraulic system. Adopting industrial-grade modular design, it integrates multiple solenoid valves to independently control the movements of the feeding axis, rotating axis, bending axis, as well as clamping, auxiliary pushing and other auxiliary mechanisms. Linked with the CNC system, it converts control commands into precise hydraulic power output, enabling smooth operation throughout pipe feeding, rotation and forming. Matched with high-pressure sealed hydraulic hoses, it maintains zero leakage and high stability under full-load operating conditions, delivering reliable performance for long-term mass production. Servo drive These four units are Mitsubishi servo drives equipped on our pipe bender, acting as the power core that governs key movements including material feeding, pipe rotation and pipe bending. Adopting Mitsubishi MR-JE series industrial-grade high-end servo drives, they feature high positioning accuracy and fast response. Both feeding distance and rotating angle can be controlled precisely with no deviation. With excellent stability, they rarely lose steps or malfunction during long-hour continuous operation. This ensures consistent bending precision for every pipe and a high finished product yield.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Nanjing Estun, controller model: E21S, working width: 3,200 mm, cutting angle (min.): 0.5 °, stroke rate (min.): 15 1/min, stroke rate (max.): 15 1/min, sheet thickness (max.): 8 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 4 mm, table height: 850 mm, back gauge adjustment: motor-driven, back gauge: 600 mm, back gauge speed R-axis: 40 mm/s, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, control voltage: 400 V, oil tank capacity: 220 l, overall weight: 7,000 kg, total length: 3,950 mm, total width: 1,700 mm, total height: 2,150 mm, number of support arms: 3, warranty duration: 24 months, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, QC11K-8/3200 Guillotine shearing machine The frame adopts an all-steel welded structure, boasting sufficient strength and rigidity. Internal stresses are eliminated through normalizing and high-frequency vibration treatment to ensure the overall precision of the machine body. German large-scale floor-type boring and milling machines are employed for precision machining using a one-time processing method, guaranteeing exceptional machining accuracy. It features a hydraulic swing-type structure with an upper tool rest return device powered by nitrogen cylinders, enabling fast return speeds. The hydraulic system utilizes an integrated logic circuit controlled by sequence valves, ensuring stable operation, low noise, and straightforward maintenance. Tool rest movement is regulated by hydraulic valves for precise control. The material pressing device incorporates an integrated circuit and independent parallel clamping cylinders. When dealing with uneven sheet metal, the cylinders can expand and contract freely to securely clamp the material. The clamping force is adjustable according to the sheet material and thickness, preventing any damage to the sheet surface. Motorized adjustment allows for quick setting of the blade gap, offering simple operation to adapt to shearing requirements of different sheet thicknesses and materials. Control is achieved through a numerical control (NC) system, enabling fixed-stroke shearing operations. An optical line alignment device facilitates scribed line shearing for enhanced accuracy. The electrical control system is centralized and reliable, with the following key features: All power facilities are installed within the machine body, operated and controlled via buttons on the control panel. A foot switch is provided for direct and convenient operation of the shearing action. Core electrical components are sourced from Schneider for guaranteed quality and reliability. Circuit breakers are installed to protect the control circuit against short circuits. Ljdpfx Afey Uquhotjrp Motor thermal-magnetic circuit breakers provide protection against motor overload and short circuits. The hydraulic system is designed for safety and reliability: The hydraulic system manifold block is equipped with a direct-acting safety relief valve to ensure accurate pressure adjustment. A pipeline check valve is specially installed at the pump head to protect the oil pump from hydraulic shock. Both upper and lower blades are made of high-quality materials and undergo full heat treatment, ensuring sufficient hardness and a long service life. The ball-rolling worktable and front material supporting device facilitate easy feeding while preventing scratches on workpieces during operation. The CNC back gauge device is equipped with high-performance servo motors, drives, precision ball screws, and linear guides, achieving a positioning accuracy of ≤±0.1mm. For the CNC electrical system:The back gauge is controlled by the E21S simple CNC system. Users can directly input the desired values, and the back gauge automatically moves to the specified position upon confirmation. Transmission is achieved through a motor-driven precision lead screw and nut assembly, with digital display via a counter. Fine-tuning for free size correction is not configured to ensure shearing precision, with an error of ≤0.2mm per meter. Three front support arms are fixed on the worktable, providing convenient placement for shearing materials.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Lrjdjy Uiyvopfx Aftep Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Mainframe The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties.