Used Crown Dt3040 for sale (905)

Condition: used, Year of construction: 2007, Overview The filler was built in 2007 by the German company Krones. The machine has been regularly serviced, is still assembled and can be inspected at any time. Technical details Output: 40,000 bph (200 ml) Formats: 200 ml glass bottle 237 ml glass bottle Closure: crown cap Direction of flow: clockwise Inlet/outlet height: 1,150 mm +- 50 mm Filling points: 96 Capping points: 15 Pitch circle diameter: 2,880 mm Pitch: 94 mm Control system: Siemens S7 Energy consumption: 15.17 kW Lsdpoqqz T Hsfx Ab Aehn

Condition: used, Year of construction: 1998, Overview This returnable glass bottling line consists mainly of equipment from KRONES and selected components from other established European manufacturers such as Hormes, RINK and HEUFT. The line is designed for a nominal output of 33,000 bottles per hour and includes the main process steps from depalletizing to palletizing.  The labeling machine will be completed according to the buyer’s requirements, allowing the line concept to be adapted to the intended bottle and product portfolio. The line is suited for returnable glass beverage applications. Based on the listed machines, the line is structured for crate handling, bottle washing preparation, empty bottle inspection, high-capacity filling/capping and returnable crate repacking. For bottles with screw caps, the RINK machine can be used upstream of the bottle washer; for crown cork bottles, an additional format set is required as per your note. Technical Data Capacity: 33,000 bottles per hour Line type: Returnable glass bottling line Main machine years: mainly 1998 and newer Bottle type: Returnable glass bottles Closure types: Crown cork and screw cap Packaging type: Beverage crates / returnable plastic crates Filling system: Isobaric filling block by KRONES Special Notes: RINK KM 790/4K-3K QL: only for bottles with screw closure For crown cork bottles, a corresponding format set is required Labeling machine: will be completed according to customer requirements Scope of Delivery Depalletizer | Profipack | – | 2006 Decrater | KRONES | Linapac A-T 1600 | 1998 Crate Washer | Hormes | Crate Washer | 1992 Crate Decapper | RINK | KM 790/4K-3K QL | 2020 Bottle Washer | KRONES | Lavatec-KES | 1998 Empty Bottle Inspector | HEUFT | Spectrum TX | 2015 Filler Block | KRONES | Sensometic VPVI 77-103 / KK11 / SV11 | 1998 Labeling Machine | To be completed according to customer requirements Crater | KRONES | Linapac F-T 1800 | 1998 Palletizing system | Profipack | 2006 Pallet Wrapper | Robopack | 2006 Pallet Security | Vertical Strapping | 2006 Additional Information: Bottle Formats: - 0.25 L Individual bottle – Ø 57.5 × 215 mm - 0.33 L Ale bottle – Ø 61 × 236.5 / 238 mm - 0.33 L Ale bottle – Ø 68.5 × 234.5 mm - 0.5 L Ale bottle – Ø 68.5 × 270 mm - 0.5 L Steinie bottle – Ø 70.5 × 174 mm - 0.5 L Bavaria bottle – Ø 70 × 260 mm - 0.5 L NRW bottle – Ø 67 × 260 mm - 0.5 L Individual bottle – Ø 82 × 295 mm - 0.7 L GDB bottle – Ø 79 × 290 mm - 0.75 L GDB bottle – Ø 79 × 290 mm - 1.0 L GDB bottle (light) – Ø 84 × 305 mm - 1.0 L AMG bottle – Ø 83.7 × 298 mm Crate Formats: - 5 × 4 – 400 × 300 × 300 mm - 6 × 4 – 400 × 300 × 270 mm Lodpfeytvyfsx Ab Ajhn - 5 × 4 – 400 × 300 × 210 mm - 4 × 3 – 355 × 275 × 345 mm - 4 × 3 – 400 × 300 × 330 mm - 5 × 4 – 355 × 275 × 255 mm - 5 × 4 – 400 × 300 × 290 mm

Condition: used, mileage: 106,865 km, power: 175 kW (237.93 HP), axle configuration: 4x2, color: white, driver cabin: day cab, gearing type: automatic, suspension: air, total width: 25,500 mm, total height: 37,500 mm, loading space length: 68,000 mm, loading space width: 23,000 mm, loading space height: 5,000 mm, Year of construction: 2022, Equipment: ABS, EBS, air conditioning, For vehicle inquiries, Mr. Seidel will be pleased to assist you (via telephone). Ljdpfx Abjyfr S Ie Ajhn Mercedes-Benz Atego 1324 L 4x2 glass-side flatbed with rear-mounted crane A1K Front axle, 5.3 t; A2P Rear axle, crown wheel 390, hypoid, 9.2 t; A2Y Rear axle, narrow version; A2Z Rear axle differential lock; A6B Axle ratio i = 4.778; B1B Electronic brake system with ABS and ASR; B1D Electronic air supply unit, medium; B1F Heating, electronic air supply unit; B2C Disc brakes on front axle, drum brakes on rear axle; B4A Condensation monitoring for compressed air system; B5B Trailer brake, 2-line; C3D Wheelbase 5,360 mm; C5I Mounting parts for flatbed; C6B Steering ZF 8095; C6Y Stabilizer under frame, rear axle; C7H Side guard; C8J Spray protection integrated in mudguard; C9P Chassis overhang extended, 600 mm; D1C Driver air-suspension seat, comfort; D1M Passenger fixed seat, standard; D2V Armrests on both sides, driver's seat; D3Q Seat cover velour; D4B Classic cockpit; D4W Electric window lifters on both sides; D4Y Side sun roller blind, driver's side; D5Y Rubber mats, driver and passenger side; D6F Air conditioning; D6Y Pollen filter; D7L Overhead storage above windscreen, single compartment; D7Q High console storage on engine tunnel; D7W Storage behind base box; D8A Roof hatch/vent; E0Y Battery cover; E2J Circuit breakers; E3W PSM 2nd generation; E4C Additional functions for bodybuilder; E5A Switch No. 1 for external body electrics; E6A Trailer socket 24V, 15-pin; E6Y Reverse warning system combined with hazard lights; E7F Cable remote control for air suspension; F1P S-cab; F1X S-cab ClassicSpace, 2.30 m, with tunnel; F2U ClassicSpace; F4I Cab rear wall with window; F6C Tinted windscreen; F6I Heated front mirror; F6J Main mirror, electric, driver side; F7V Cab access, two steps; F8E Locking system with central locking; F8F Comfort locking system; F8V Light sensor; F8W Rain sensor; G0K Drive mode economy/power; G1D Transmission G 90-6/6.70-0.73; G5G Mercedes PowerShift 3; I1C Tubeless tires 10 R 22.5 front axle; I4A Axle configuration 4x2; I5X 13.5-tonner; I6A Flatbed chassis; I6X Rear axle air suspension; J1A Combination instrument 10.4 cm; J1O Digital tachograph, 2nd generation, ADR; J1S Tachograph manufacturer VDO; J2K Speakers, 2-way system; J3N Fleetboard Eco Support; J3V Truck Data Center 7; J5S Radio with USB port and Bluetooth; J8Y Preparation for Truck Data Center 7; J9D Pre-installation for toll collection; J9K Universal preparation for multimedia use; JKUR AdBlue tank relocated to right; JKVJ Main fuel tank relocated from left to right; K0G Plastic tank 180 l, left; K3S AdBlue tank 35 l; K5M Lockable tanks; K5Q Strainer for fuel filler neck; K5S Protective cap for AdBlue dosing system; K7L Exhaust system, tailpipe towards center of road; L0A Lighting requirements according to UN-R 48.06; L0Y Rear light cable set, extended; L1C LED daytime running lights; L1H Fog lamps, halogen; L1Y LED light package, front, with white indicator lenses; L1Z Indicator lenses, white; L2H Flashing side marker lights; L2P LED outline marker light; L3E 1 working light, upper rear panel; M0Q Noise regulations according to UN-R 51.03 Level 2; M2A Engine OM936, R6, 7.7 l, 175 kW (238 HP), 1000 Nm; M4X Engine version Euro VI, E; M5V High performance engine brake; N0S NA MB 60-2c, MPA low, nominal speed; N6K Transmission lock for PTO; O1X CLCS TL function integration in ASAM; O2L GU vehicle with...

Condition: good (used), Year of construction: 2006, functionality: unexamined, machine/vehicle number: 06 03 1000, Country of manufacture: CH Voltage: 400V Dimensions: 1200 x 1650 x 2050 mm Net machine weight: 1900 kg TECHNICAL SPECIFICATIONS Machine: Disc rotation speed: 0–110 rpm Maximum drive power for discs: 2 kW Maximum upper disc load: 20 daN Disc diameter: Ø 450 mm Internal drive rotation speed: 0–115 rpm Maximum internal drive power: 0.5 kW Disc drive motors (continuous motor): Type: DC motor Armature voltage Ua: 260 V Field voltage Ue: 340 V Rotation speed: 3110 rpm Power: 2 kW External ventilation: 220V, 50/60 Hz Internal drive motor: Motor type: smooth operating mid-position control motor Armature voltage Ua: 260 V Field voltage Ue: 340 V Rotation speed: 3110 rpm Power: 0.5 kW Separate ventilation: 220V, 50/60 Hz Vertical drive motor: Type: stepper motor Steps per second: 50 Torque: 1100 Nm Lhodjw T Tpdepfx Ab Aon Crown gear adjustment: Type: AC brake motor 2 positions Voltage: 380V / 50 Hz Rotation speed: 700–1400 rpm Power: 0.25/0.37 kW DC brake: 24V Braking torque: 16 Nm Power converters: Input voltage: 380V / 50 Hz Induced voltage: 270 V Field voltage: 340 V Worm gear reduction ratio (internal drive): Ratio: i = 1 : 30 Worm gear reduction ratio (lower system): Ratio: i = 1 : 15.5 Worm gear reduction ratio (upper system): Ratio: i = 1 : 15.5 Operating pressure: Air circuit: 6–7 bar Lapping fluid pump: Connection voltage: 380V 50Hz Rotation speed: 2600 rpm Flow rate: 57 L/min Protection: IP 44 Control and measurement device: Measurement range: 6 (±3 to ±11000 mm) See details in Millitron user manual Inductive probe: Measurement range: ±2 mm Setpoint adjustment device: Display: 4 digits Unless stated otherwise, all technical data are provided without guarantee and subject to change or error.

Condition: new, pressure 135 t chamfer lenght 4100 mm distance between columns 3600 mm column arm 410 mm ram stroke speed 200 mm/sec work speed 12.0 mm/sec return speed 190 mm/sec work stroke 275 mm dayligth 550 mm table height 900 mm oil volume 300 ltr. Lhodpfx Abjxaa U Es Asn voltage 400 Volt total power requirement 15.0 kW weight 10800 kg range L-W-H 5100 x 2100 x 2850 mm ----- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection ----- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Split universal die block M 460 R, including die shoe C 1050-R - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes Special equipment including: - electrical central lubrication

Condition: new, pressure 175 t chamfer lenght 4100 mm distance between columns 3600 mm column arm 410 mm ram stroke speed 180 mm/sec return speed 135 mm/sec work speed 10,0 mm/sec work stroke 275 mm dayligth 550 mm table height 900 mm table width 90,0 mm oil volume 200 ltr. voltage 400 Volt total power requirement 15,0 kW weight 11.950 kg Lodpfxjxabapj Ab Aehn range L-W-H 5100 x 2150 x 2850 mm ----- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds ----- Furnishing: - DELEM CNC control model DA-58T graphics / touchscreen * 2D graphic programming * 15 "high definition color TFT screen * Bending sequence calculation * Product programming and display in real size * USB interface - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135.85-R08, system "A" with quick-change clamp - Additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm holder - BOSCH / HOERBIGER hydr. Components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protective device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "sliding system", with T-slot and tilting cam - 1x double foot control - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes

Condition: new, pressure 60.0 t chamfer lenght 2100 mm distance between columns 1700 mm column arm 410 mm ram stroke speed 160 mm/sec work speed 10.0 mm/sec return speed 165 mm/sec Lhsdpfxexabckj Ab Aon work stroke 275 mm dayligth 530 mm table height 900 mm table width 90.0 mm oil volume 150 ltr. voltage 400 Volt total power requirement 7.5 kW weight 5640 kg range L-W-H 3250 x 1960 x 2750 mm ----- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds ----- Furnishing: - DELEM CNC control model DA 53T (touchscreen) - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135.85-R08, system "A" with quick-change clamp - Additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm holder - BOSCH / HOERBIGER hydr. Components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protective device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "sliding system", with T-slot and tilting cam - 1x double foot control - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes

Condition: new, pressure 175 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 410 mm ram stroke speed 180 mm/sec work speed 12.0 mm/min return speed 190 mm/sec work stroke 275 mm dayligth 550 mm oil volume 300 ltr. table height 900 mm table width 90.0 mm voltage 400 Volt total power requirement 15.0 kW weight 9800 kg range L-W-H 4150 x 2150 x 2800 mm ----- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection ----- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Split universal die block M 460 R, including die shoe C 1050-R - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components Lhedjxabfxepfx Ab Aen - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes

Condition: new, width of the strips 150 mm band length 2000 mm band speed 30.0 m/sek grinding width 500 Plantisch mm suction capacity 630 m³/h total power requirement 3.75 kW weight of the machine ca. 100 kg range L-W-H 1100 x 550 x 1035 mm Furnishing : - High quality construction - The drive roller is crowned - this automatically centers the sanding belt in the middle of the roll - Fully vulcanized contact roller for longest service life and smooth running - Tool-free and therefore faster, uncomplicated change of the sanding belt Ledpsxabhgofx Ab Ashn - Stepless height adjustment - for optimal adjustment of the belt sander to the user - Freely adjustable metal stop - for the optimal and safe guidance of workpieces Use of the large surface grinding area - Belt speed optimized in terms of design - thus burning the workpiece during processing can be largely excluded - Extraction equipped with robust and flexible extraction hoses - Motor protection switch with CEE collar connector including phase inverter - engine brake - Including sanding belt, grain 60 - dust bag

Condition: used, Year of construction: 1997, pressure 130 t chamfer lenght 3060 mm distance between columns 2690 mm column arm 410 mm stroke 365 mm dayligth 535 mm ajustment speed 200 mm/sec working feed 1.0 - 10.0 mm/sec return speed 135 mm/sec table width 120 mm table height 1050 mm tiltable up to +/- 10.0 mm Number of working hours ca. 31.800 h compressed air 5.0 - 7.0 bar oil volume 250 l operating pressure 340 bar voltage 400 V total power requirement 23.0 KVA weight of the machine ca. 12950 kg range L-W-H 3660 x 2310 x 2900 mm Machine in a well-maintained condition (!!) with only approx. 31.800 operating hours - in checked condition - machine video - ?v=PBV-MDtZnlE Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model DA 65 * swiveling control panel, front left * 2D graphic programming & product display * Tool & program library * USB keyboard and mouse interface - CNC controlled axes: Y1 + Y2 / X1 + X2 / R1 + R2 / Z1 + Z2 / I axis - CNC controlled back stop (X1 + X2 axis) - CNC controlled height adjustment of the back stop (R1 + R2 axis) - CNC controlled adjustment of the stop fingers (Z1 + Z2 axis) - CNC controlled, pneumatic die displacement (I axis) - CNC WILA electro-motoric table crowning Lodpfx Absxacfmo Aehn - TRUMPF hydraulic upper tool clamping - TRUMPF manuel Lower tool clamp - 1x freely movable 2-hand / foot control - Safety device at the rear (sliding door) - Safety device at the side (swinging door) - Original operating instructions + spare parts list

Condition: new, functionality: fully functional, Year of construction: 2025, pressing force: 180 t, Pressure: 180 t Bending length: 3100 mm Frame width: 3100 mm Control: Cybelec CybTouch 15 Stroke: 250 mm Installation height: 470 mm Rapid approach (down): 180 mm/s Bending speed: 0-10 mm/s Rapid return (up): 165 mm/s Total power requirement: 15 kW Machine weight approx.: 14,000 kg Dimensions: 4255 x 2390 x 3030 mm Standard equipment: - CNC control Cybelec CybTouch 15 Windows - 4 + 1 axes: Y1, Y2, X, R, C - Mechanical crowning system: B-CM - Backgauge system mod. GHP-2 - Servo-driven main motor - Safety system: DSP AP+MCS Lsdpfxjwz Et Sj Ab Aohn Additional equipment: - 2 x front support tables - 2 x stop fingers - Hydraulic upper tool clamping Wila Style - Hydraulic die clamping Wila Style - CE standard norm

Condition: used, mileage: 21,790 km, power: 200 kW (271.92 HP), axle configuration: 4x4, color: white, driver cabin: sleeper cab, gearing type: mechanical, suspension: air, total length: 80,750 mm, total width: 25,500 mm, total height: 36,850 mm, loading space length: 55,600 mm, loading space width: 24,900 mm, loading space height: 21,900 mm, Year of construction: 2018, Equipment: ABS, EBS, air conditioning, For inquiries regarding the vehicle, please contact Mr. Seidel (phone number: .Mercedes-Benz Arocs 1827 A 4x4 box body + tail lift Tail lift: BÄR BC 1500 S4-B4 (1,500 kg), side door with steps, A1C front axle 7.5 t, A1W differential lock, front axle, A1Y front axle, straight design, A2G rear axle, crown wheel 300, planetary gears, 13.4 t, A5W axle ratio i = 4.143, B1B electronic braking system with ABS and ASR, B1D electronic compressed air supply unit, medium, B1F heater, electronic compressed air supply unit, B1Z ABS, switchable, B2B drum brake, on front and rear axles, B4A condensate monitoring, for compressed air system, B4M compressed air tank, steel, B5A trailer brake, 2-line, brake connections on the left, C2I wheelbase 4200 mm, C4C frame overhang 2100 mm, C5I fastening parts, for platform body, C6C steering, 1-circuit, C6J steering power pump, unregulated, C6Q stabilizer, front axle, C6Y stabilizer, under frame, rear axle, C7A rear underrun protection (ECE), C7J battery carrier, batteries side by side, D0S compressed air connection, in the cab, D1C driver's air-suspended seat, comfort, D1P passenger's air-suspended seat, comfort, D2M seat back, unlocking, passenger seat, D2N seat back, unlocking, driver's seat, D2W armrests, on both sides, passenger seat, D3B comfort bed, lower, D3S seat cover, leather, driver's seat, D3T seat cover, velour, passenger seat, D4T curtain, transverse in front of bed(s), D6F air conditioning, D6I waste heat recovery system, D6M auxiliary hot water heater, cab, D6Z construction site filter, D7R storage compartment flaps, above the windshield, D8N lifting roof, electric, D9A pre-equipment for comfort bed, upper, wide, E0D battery sensor, from Hella, E1C batteries 2 x 12 V/220 Ah, low maintenance, E1N generator 28 V/100 A, E3A voltage converter 24 V/12 V, 10 A, E3L socket 24 V/15 A, passenger footwell, E4C additional functions, for body manufacturer, E5G battery disconnection switch outside, on the frame, E5H switch for night running lights, E6A trailer socket 24 V, 15-pin, E9E pre-equipment ADR, without chassis cover, E9H pre-equipment control for tail lift, F0G side module, N3G vehicle, F0Y mirror cover, construction vehicle, F1W L-cab, StreamSpace, 2.30 m, tunnel 320 mm, F3B cab mounting, comfort, spring-mounted, F3W cab tilting device, mechanical-hydraulic, F4H rear cab wall, without window, F4X storage compartment exterior flap, left, F4Y storage compartment exterior flap, right, F5Y A-pillar trim, F6D windshield tinted, with band filter, F6I front mirror, heated, F7B bumper, corners made of steel, F7D bumper, center part towing eyes, coupling head, F7Y cab entrance left/right, movable, F8E locking system, with central locking, F8F comfort locking system, G0R transmission torque arms, optimized for installation, G1F transmission G 141-9/14.57-1.0, G4E transfer case VG 3000-3W, 1.04 switchable, G5A single-plate clutch, G5H gear shifting, manual, I1G tires tubeless, 12 R 22.5 front axle/front steered axle/rear steered axle, I1H tires tubeless, 12 R 22.5 rear axle, I4B wheel arrangement 4x4, I5A 18-ton vehicle, I6I vehicle production site Wörth, I6W leaf spring suspension, rear axle, J1C instrument panel, 12.7 cm, with video function, J1R tachograph digital, EC, speed, ADR, J1S tachograph manufacturer VDO, J2E radio, with USB connection, J2K speakers, 2-way system, J9A pre-equipment CB radio, 12 V, DIN socket, J9D pre-equipment for toll collection, J9J pre-equipment for reversing camera, K0T main tan Lodpsztlpzefx Ab Ashn

Condition: used, mileage: 48,637 km, power: 130 kW (176.75 HP), color: white, gearing type: automatic, loading space length: 57,200 mm, loading space width: 24,900 mm, loading space height: 22,000 mm, Year of construction: 2023, Equipment: ABS, air conditioning, power assisted steering, For inquiries regarding the vehicle, please contact Mr. Seidel (at telephone number). Mercedes-Benz Atego 818 L refrigerated box van + tailgate lift. Lhodpfxezlbage Ab Ajn Tailgate lift: Dautel DL 1000 L (1,000 kg), refrigerated unit ThermoKing V-600 Max, temperature recorder, A1M front axle, 4.1 t, A2B rear axle, crown wheel 325, hypoid, 6.2 t, A2Z rear axle differential lock, A5L axle ratio i = 3.417, B1B electronic braking system with ABS and ASR, B1C electronic compressed air supply unit, low, B1F heater, electronic compressed air supply unit, B2A disc brake, on front and rear axles, B4A condensate monitoring, for compressed air system, C2J wheelbase 4220 mm, C5I fastening parts, for platform body, C6A steering ZF 8090, C6Y stabilizer, under frame, rear axle, C7M protective device, lateral, weight-optimized, C9Y deletion of rear underrun protection (ECE), D1C driver's air-suspended seat, comfort, D1M passenger's fixed seat, simple, D2V armrests, on both sides, driver's seat, D2Y seatbelt control, D3Q seat cover, velour, D4B classic cockpit, D4W power windows, on both sides, D5Y rubber floor mats, driver and passenger side, D6F air conditioning, D6Y pollen filter, D7L storage compartment, above windshield, 1 compartment, D8A roof hatch/ventilation flap, roof, E0F batteries, Exide, E0Y battery cover, E1H batteries, 2 x 12 V/165 Ah, maintenance-free, E1N generator 28 V/100 A, E4C additional functions, for body manufacturer, E5A switch No. 1 for external body electrical system, E6Z reversing warning, E7F cable remote control for air suspension, E9H pre-installation for tailgate lift control, F1X S cab ClassicSpace, 2.30 m, tunnel, F5L external sun visor, transparent, F6I front mirror, heated, F6J main mirror, electric, driver's side, F7W cab entry, single-step, F8E locking system, with central locking, F8F comfort locking system, F8V light sensor, F8W rain sensor, F9A pre-installation, cab parts, body width 2600 mm, G0K driving program economy/power, G1D transmission G 90-6/6.70-0.73, G5G Mercedes PowerShift 3, I0E tires tubeless, 215/75 R 17.5 front/front-outer axle, I4A wheel formula 4x2, I5Q 7.5-ton truck, I6A platform chassis, I6X air suspension, rear axle, J1H instrument panel, 12.7 cm, J1O tachograph digital, 2nd generation, ADR, J1S tachograph manufacturer VDO, J3N Fleetboard Eco Support, J3V Truck Data Center 7, J4X seatbelt warning, with seat occupancy detection passenger side, J5S radio, with USB connection and Bluetooth, J8Y pre-installation for Truck Data Center 7, J9D pre-installation for toll collection, K0E plastic tank 120 l, left, K3T AdBlue tank 25 l, K5M tanks, lockable, K5S protective cap for AdBlue dosing system, K7I exhaust system, on frame right, tailpipe to the inside, L0A lighting regulations, according to UN-R 48.06, L0Y rear lights wiring harness, extended, L1B daytime running lights, L2H side marker lights, flashing, L9D pre-installation, additional turn signals, M0S noise encapsulation, according to ECE, M1I engine OM934, R4, 5.1 l, 130 kW (177 hp), 750 Nm, M4X engine version Euro VI, E, M5V High Performance Engine Brake, M8Z fuel preheating, O1N Off-Line FHS attachments, O1X integration of CLCS TL function in ASAM, P0L tailgate lift preparation, Atego, Q1C front suspension 3.4 t, parabolic, R0Z wheel nut cover, R1A steep shoulder rims 6.00 x 17.5, S1D stability control assistant (ESP), S1H lane keeping assist, S1P Active Brake Assist, S5A speed limiter 90 km/h / 56 mph, ECE, S5Z cruise control, T0G weight variant 7.49 t (3.4/4.

Condition: used, mileage: 213,100 km, power: 330 kW (448.67 HP), first registration: 03/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: yellow, gearing type: automatic, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, * Special equipment: * Equipment package: Economy, * Equipment package: Comfort, * CB radio, * Interactive cockpit multimedia system, * Air horn, * Suspension: front springs 7.5 t, 2 leaves, * 12-speed transmission - Type: G 211-12, * Power Shift transmission * Manual sunroof (steel), * Integral rear panel, * Fuel tank: 510 liters, aluminum, left side, * Cool box / refrigerator, * 2-cylinder air compressor, * Mounting plate / saddle plate 12 mm for fifth wheel coupling, * Enhanced engine brake, * Wheelbase variant 3700 mm, * Smoker's package, * Rain sensor, * Reversing warning system (acoustic and warning lights - external warning signal), * Fifth wheel coupling: low maintenance, lubricated locking mechanism, * Additional key with remote control (2), * Fleet management system interface, * External sun visor, * 24V / 25 A socket in the co-driver's footwell, * Additional 24V socket in the co-driver's footwell, * Door extension for the cab, * Switch for lift axle on the trailer * Seatbelt warning system, * Auxiliary heater (water) * Emission standard EURO 6E * Axle configuration: 4x2, * Front axle load 7.5 t, * Medium-length cab * Heated approach / front mirrors, * Trailer electrical and brake connection, high, * Trailer socket 24V / 15-pin, * Step on the cab, left side, * Exhaust pipe to the right, exterior, * Battery 170 Ah, batteries arranged side by side, * Differential lock, rear axle, * Increased torque in 12th gear, * Compressed air connection in the cab, * Compressed air tank, steel, * Compressed air unit with condensate monitoring, Lodpszc Sqrofx Ab Aehn * Automatic activation for headlights (light sensor), * Driver assistance system: Attention Assist (fatigue detection sensor), * Driver assistance system: Autonomous Emergency Braking System (Active Brake Assist 5), * Driver assistance system: Lane Keeping Assist, * Cab: fixed cab entry, * Cab: hydraulic tilting mechanism, * Cab: M ClassicSpace, 2.30 m, tunnel 170 mm, * Vehicle outline lights, LED, * Suspension: leaf / air, * Electric windows, * Tinted windshield, * Speed limiter, * Urea tank (AdBlue): 60 liters, * Rear axle, crown wheel 440, * Body/Superstructure: semi-trailer tractor, * Comfort locking system, * Steering oil cooler, * Heated air dryer, * Engine 12.8 liters - 330 kW R6 Diesel (OM 471), engine variant OM 471, * Intended use: local transport, * Wheelbase 3700 mm * Ramp mirrors, * Waste heat recovery, * Disc brakes, front and rear axles, * Key with remote control (2), * Side marker lights, LED flashing, * Seats in the cab: co-driver's functional seat, * Splash guard, front, * Front axle stabilizer bar, * 12V socket in the co-driver's footwell, * Tachograph / EU control device, * Truck Data Center 7 (fleet management system), * Underrun protection, front, * Preparation for toll collection, * Preparation for Truck Data Center (fleet management system), * Front axle, cambered, * Regulated water pump, * Permissible total weight 18.00 t * Subject to errors, changes and prior sale.

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, pressing force: 40 t, BAYKAL CNC press brake Mod.: APHS-C 125040 Unused SN: 28542 YEAR OF MANUFACTURE: 09/2021 in the following version: - DELEM control system DA-58T 2D-graphics with touch screen - CNC controlled backgauge with ball screws, X-axis 750 mm + 250 mm, R-axis = 130 mm - Manual table crowning - AKAS laser safety device - Safety cover on the side and rear - 2 pcs. Front support arms on linear guides - Top system tool holder - System tool holder at the bottom - Technical documentation - CE version - Colors: * RAL 7015 - slate gray * RAL 7035 - Light gray * RAL 3003 - Ruby red Technical data: - Pressing pressure: 40 t - Working length: 1,250 mm - Motor connected load: 4 kW - Oil tank volume: 80 lt. - Departure speed: 160 mm/sec. - Working speed: 10 mm/sec. Lsdpfx Abetz Azdj Ajhn - Retraction speed: 130 mm/sec. - Folding length: 1,250 mm - Stand passage: 1,070 mm - Stand depth: 1,470 mm - Table height: 800 mm - Machine height: 2,250 mm - Installation height: 455 mm - Stroke: 215 mm - Table width: 60 mm - Projection: 410 mm - Weight: 3,300 kg Subject to errors and prior sale!

Condition: new, functionality: fully functional, Comparable with Durma, Baykal, Ermaksan, etc. Bending length 3020 mm Pressing force 320 t (also available in many other configurations!) Approach speed 140 mm/s Ledpfjuf Nr Asx Ab Aehn Bending speed max. 10 mm/s Return speed 130 mm/s Y-axis stroke 400 mm Open height 650 mm Throat depth 450 mm Clear gap between frames 2555 mm Machine length 3785 mm Machine width 2290 mm Width without support arms 1740 mm Overall height 3100 mm Table height 920 mm Motor power 22 kW Oil tank capacity 300 l Machine weight 14,450 kg (Specifications may vary depending on equipment) Standard equipment: 3 CNC axes (Y1, Y2, X) Press beam double-guided, stable and precise Robust double-guided backgauge Backgauge fingers double-guided on linear rails Movable front arms with height adjustment Side and rear safety guards 60mm lower die adapter rail Manual upper tool clamping system (Promecam system) Foot switch with emergency stop 380 V, 50-60 Hz, 3 phase LED lighting Additional equipment: Delem DA 66t CNC control R-axis (backgauge) CNC controlled CNC-controlled crowning Fiessler Akas 2M laser safety device 2 additional backgauge fingers (total 4) 1 set of top and bottom tooling - Further processing lengths and capacities available upon request with appropriate accessories! -

Condition: used, Year of construction: 2007, Overview The filler was built in 2007 by the German company Krones. The machine has been regularly serviced, is still assembled and can be inspected at any time. Technical details Output: 40,000 bph (200 ml) Formats: 200 ml glass bottle 237 ml glass bottle Closure: crown cap Running direction: counterclockwise Inlet/outlet height: 1,150 mm +- 50 mm Filling points: 96 Capping points: 15 Pitch circle diameter: 2,880 mm Pitch: 94 mm Control system: Siemens S7 Energy consumption: 15.17 kW Ledpfsqqz Txsx Ab Aohn

Condition: good (used), mileage: 462,334 km, power: 130 kW (176.75 HP), first registration: 12/2015, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: silver, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2015, Equipment: AdBlue, air conditioning, cruise control, electric window regulation, fog lights, power mirror, soot filter, spoiler, tail-lift, = Additional options and equipment = - Leaf suspension - Roof spoiler - EPS (Electronic Stability Program) - Particulate filter - Radio/CD player - Side door - Toolbox = Further information = Axle configuration Front axle: Steering; Suspension: Leaf suspension Rear axle: Suspension: Air suspension Weights Unladen weight: 8,600 kg Payload: 3,390 kg gross vehicle weight (GVW): 11,990 kg Functionality Refrigeration unit: diesel and electric Condition Technical condition: good Visual condition: good Warranty Warranty: No liability for printing and typographical errors. Subject to change, prior sale, and mistakes! Identification Reference number: 33 Further information Please contact Emad Al Shogran for more information. Vehicle number: 33 Mercedes Benz Atego 1 Carrier Supra 1250 / AC / Euro 6 / tail lift VIN: WDB96702510017605 Lhjdovl Szfepfx Ab Ajn Suspension: Leaf / air Transmission: Automatic Air conditioning Engine brake Distance control assistant Lane departure warning EURO 6 - AdBlue Wheelbase: 4,760 mm Refrigeration unit Brand: CARRIER Type: Supra 1250 Refrigeration unit: Diesel + electric Internal dimensions: Length: 6.65 m Width: 2.50 m Height: 2.50 m Special equipment: Audio system: CD radio comfort (Bluetooth), 165 Ah battery, standard cockpit, driver assistance system: brake assist (Active Brake-Assist), driver assistance system: lane departure warning, electric windows, Fleetboard Dispopilot guide, tinted windscreen, 100 A alternator, holder for Fleetboard Dispopilot, communication interface, fuel tank: 180 liters plastic, LED lighting package, chassis extension, spare wheel, acoustic reversing warning (external warning signal), tail lift switch, seats in cab: driver’s seat with armrest, seats in cab: comfort suspension seat, external sun visor, lateral underrun protection Further features: Emission standard EURO 6, axle configuration: 4x2, front axle load 5.3 t, starting/front mirror, exhaust pipe to vehicle center, external mirrors electrically adjustable, left, steel air tank, low-pressure air unit, two-step entry, cab: S ClassicSpace, cab variant: ClassicSpace, suspension: leaf/air, front suspension 4.4 t, 6-speed transmission - type: G 71-6, 6-speed transmission - type: G 90-6, AdBlue tank: 25 liters, manual roof hatch (steel), rear axle crown wheel 390, 10.4 cm info display with additional indicator, body/chassis: chassis, engine 5.1 l - 130 kW diesel (OM 934), engine brake, engine compartment encapsulation, wheelbase 4,760 mm, disc brakes front and rear, seat cover/upholstery: fabric, seats in cab: single passenger seat, fixed, rear mudguard splash guards, rear axle stabilizer, control type cab, tachograph / EC control device, fixed rear underrun protection, front underrun protection, immobilizer, permitted total weight 11.99 t Refrigeration unit brand: Carrier = Company information = No liability for printing and typographical errors. Subject to change, prior sale, and mistakes! Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email:

Condition: used, 2 Hohner Stitching Heads 43/6, used The Hohner stitching heads 43/6 are high-quality stitching heads designed for professional wire saddle stitching of brochures and other printed products. These used stitching heads offer reliable performance and precision in stitching. Lsdpfx Aeu Sz I Aeb Aohn Special features: - Versatility: Suitable for the production of brochures, booklets, and other printed products requiring stable stitching - Compatibility: Can be used in saddle stitchers from various manufacturers such as Horizon, Duplo, or Bourg - Flexible application: Ideal for processing different paper formats and weights - Easy handling: Quick adaptation to various stitching requirements - Precise stitching: Ensures clean and uniform stitching with high quality - Wire thickness: Compatible with round wire - Robust construction: Designed for industrial use Technical specifications: - Wire: 26-28 - Maximum stitching thickness: Up to 6 mm - Minimum staple distance: 43 - 52 mm - Length of staple crown: 12 mm - Net weight: Approx. 1.5 kg per stitching head

Condition: used, machine/vehicle number: 147, mileage: 196,850 km, power: 100 kW (135.96 HP), first registration: 01/1999, fuel type: diesel, empty load weight: 3,195 kg, maximum load weight: 2,795 kg, overall weight: 5,990 kg, tire size: 215/75 R16c, axle configuration: 2 axles, wheelbase: 3,600 mm, color: blue, gearing type: mechanical, emission class: euro2, suspension: steel, Equipment: low noise, trailer coupling, Displacement 4,240 ccm Double bench seat 7 seats Lhsdpfxonkc Elo Ab Asn Rear axle bevel and crown wheel defective NOT READY TO DRIVE! VIN no. N079381 Errors excepted

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, stroke length: 275 mm, throat depth: 410 mm, operating speed: 12 mm/s, reverse speed: 190 mm/s, table height: 900 mm, oil tank capacity: 300 l, overall weight: 9,086 kg, total length: 5,025 mm, total width: 2,150 mm, total height: 2,680 mm, power: 15 kW (20.39 HP), input voltage: 400 V, input frequency: 50 Hz, pressing force: 175 t, clearance between the columns: 2,600 mm, distance table to ram: 550 mm, table length: 3,100 mm, type of input current: three-phase, Equipment: CE marking, documentation/manual, safety light barrier, 2022 Ermaksan Speed-Bend PRO 3100x175 CNC Press Brake 2022 Ermaksan Speed-Bend PRO 3100x175 CNC press brake in very good condition. 175T x 3100mm, 6 axis, Delem DA66TX, CNC crowning, laser guards, generous tooling package included. Machine Manufacturer: Ermaksan Model: Speed Bend Pro 3100 x 175T Machine Type: 6 Axis CNC Pressbrake Capacity: 3100 x 175T Year: 2022 Control: Delem DA66TX Condition: Very Good Description Ermaksan Speed-Bend Pro 6 Axis CNC Hydraulic Press Brake with Delem DA66TX Control. Available now, this 2022 Ermaksan Speed-Bend PRO 3100x175 CNC Press Brake is a high-quality, modern hydraulic press brake in very good condition. This is a 6 axis machine with Y1, Y2, X, R, Z1 and Z2 axes, fitted with a Delem DA66TX CNC control, pneumatic top tool clamping, CNC crowning, laser guards, wanderer type foot pedal, and supplied with generous selection of top and bottom tooling. Ideal for sheet metal fabrication, precision bending, stainless steel work, mild steel fabrication, aluminium bending, agricultural fabrication, general engineering and production workshops. Key Features 2022 Ermaksan Speed-Bend PRO 3100x175 175 tonne bending capacity 3100mm bending length Lsdpfxez Dn Hue Ab Aohn 6 axis CNC press brake Y1, Y2, X, R, Z1 & Z2 axes Delem DA66TX CNC control Pneumatic top tool clamping Package of Top and bottom tooling included CNC / motorised crowning Laser safety guards Wanderer type foot pedal Very good condition Excellent machine for fabrication and production bending work Capacity & Main Machine Data Manufacturer: Ermaksan Model: Speed-Bend PRO 3100x175 Year: 2022 Machine Type: CNC hydraulic press brake Bending Length: 3100mm Bending Force: 175 tonnes Distance Between Columns: 2600mm Axes: Y1, Y2, X, R, Z1, Z2 Crowning: Motorised / CNC crowning Backgauge Finger Blocks: 2 Speeds & Axis Travel Y Rapid Speed: 180mm/s Y Working Speed: 12mm/s Y Return Speed: 190mm/s X Axis Travel: 800mm X Axis Speed: 500mm/s R Axis Travel: 250mm R Axis Speed: 350mm/s Z1 / Z2 Axis Travel Speed: 1000mm/s Stroke, Daylight & Frame Stroke: 275mm Daylight: 550mm Throat Depth: 410mm Table Height: 900mm Table Width: 90mm Power, Size & Weight Oil Capacity: 300 litres Motor Power: 15kW Approx. Length: 5025mm Approx. Height: 2680mm Approx. Width: 2150mm Approx. Weight: 9086kg Delem DA66TX CNC Control Control Features Include 2D graphical touch-screen programming High-resolution colour TFT display Automatic bend sequence calculation Collision detection 3D machine setup with multiple tool stations USB / peripheral interfacing Product and tool memory Profile-TL offline software support User-friendly Delem touch navigation Delem’s DA-66T platform is listed by Delem as a 2D graphical press brake control with automatic bend sequence calculation, collision detection, full 3D machine setup, USB interfacing, 17" high-resolution colour TFT display and Profile-TL offline software support. Included Equipment Pneumatic top tool clamping Lots of Top tooling Lots of Bottom tooling CNC crowning Laser guards Wanderer type foot pedal 6 axis CNC backgauge system Delem DA66TX control Typical Applications Sheet metal fabrication CNC press brake bending Mild steel bending Stainless steel bending Aluminium bending Box and pan type components Architectural metalwork Agricultural fabrication General engineering workshops Production bending work

Condition: new, power: 309 kW (420.12 HP), fuel type: diesel, axle configuration: 8x4, wheelbase: 54,500 mm, fuel: diesel, gearing type: automatic, emission class: euro3, Year of construction: 2025, Equipment: ABS, Bluetooth, EBS, air conditioning, central locking, differential lock, electric window regulation, electronic stability program (ESP), onboard computer, - Heated mirrors - Leaf spring suspension - Differential lock - Air conditioning - Air-suspended seats - Power take-off (PTO) EUROMIX TO GO – immediately available new vehicles from stock in Porta Westfalica. Fully assembled, directly from the manufacturer – ideal for short-term capacity expansion or replacement investment. Price negotiable – please contact us. Mercedes-Benz Arocs 5 4542 8x4 Euro 3 Concrete pump EuromixMTP SWAN TSP 47-5 RZ - NEW - without registration Vehicle equipment: Engine OM460, R6, 12.8 l, 310 kW (421 hp), 2100 Nm Euro 3 Transmission G 280-16/11.7-0.69 Front axle 9 t - Rear axle, crown wheel 300, planetary gears, 13.4 t Weight variant 41.8 t (7.5/7.5/13.4/13.4) Wheelbase 5450 mm Cab S-cab Classic Space Disc brakes, on front and rear axles Tank 290 l, left, 735 x 700 x 750 mm Cab rear wall, with window - Windshield tinted Roof hatch/ventilation flap, roof External sun visor, transparent Multi-function steering wheel Classic cockpit Air conditioning Cruise control Vehicle class N3G, off-road vehicle EuromixMTP - Concrete pump SWAN TSP 47-5 RZ Model: SWAN TSP 47-5 RZ Section: Concrete pump: Max. theoretical concrete capacity: m³/hr Max. theoretical concrete pressure: 85 bar Stroke 30 per min Delivery cylinder: Ø230 mm x 2100 mm stroke Hydraulic main cylinder: Ø2100 mm x Ø140 x Ø80 mm Concrete valve: S-valve, water pump: 20 l/min - bar Water tank: 800 l, 12 m hose with spray gun Concrete hopper: 600 liters Lubrication: Lincoln automatic lubrication for hopper group Hydraulic pumps: Rexroth 2xA4VG145, Rexroth A10VO28 Rexroth A17FO045, Blau Ascend AP 20.140/115 Switching system: Magnetic sensor (proximity switch) Switch cabinet: DIGITEX, waterproof Remote control: Scanreco remote control + 30 m cable Lhsdpey D D Ersfx Ab Aen Section: Boom: Boom S 47-5 (5-section boom, RZ folding) Type: RZ folding Max. vertical reach: 46.8 m (without end hose) Max. horizontal reach: 42.8 m (without end hose) End hose: 3m single flange, DN 125 Platform type: X-type Slewing ring: 365 degrees Slewing speed: 0.3 RPM Diameter of delivery line: 125 mm (outer diameter 132 mm) 5.5" flanges & couplings Control system Support width front: 8.6 m Support width rear: 8.7 m Your advantages • Immediately ready for use: Concrete pumps, concrete mixers, tippers, roll-off tippers • Chassis, structure and assembly from a single source • Fair prices • Financing in 19 European countries • Trade-in of your used vehicle Your contacts • Denis Omeragic: German, English, Bosnian, Croatian, Serbian • Henri Omeragic: German, Bosnian, Croatian, Serbian • Harun Cevik: German, English, Turkish • Jamila Azzi: French, Arabic • Olga Tissen: German, Russian • Karolina Cyburt: Polish EuromixMTP GmbH, Gänsekamp 7, 32457 Porta Westfalica Year of construction: 2025 Usable material: Concrete Front axle 1: Steered Front axle 2: Steered Number of cylinders: 6 GVW: 45,000 kg Brand of...

Condition: new, power: 309 kW (420.12 HP), fuel type: diesel, axle configuration: 8x4, wheelbase: 54,500 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro3, Year of construction: 2025, Equipment: ABS, Bluetooth, EBS, air conditioning, central locking, electric window regulation, electronic stability program (ESP), onboard computer, - Heated mirrors - Leaf spring suspension - High beam headlights - Air conditioning - Air-suspended seats - Power take-off (PTO) - Central lubrication system EUROMIX TO GO – immediately available new vehicles from stock in Porta Westfalica. Completely assembled, directly from the manufacturer – ideal for short-term capacity expansion or replacement investment. Price negotiable – please contact us. Lhsdpfx Abey D D D Is Aen Mercedes-Benz Arocs 5 4542 8x4 Euro 3 Concrete pump EuromixMTP - SWAN TSP 47-5 RZ - NEW - without registration Vehicle equipment: Engine OM460, R6, 12.8 l, 310 kW (421 hp), 2100 Nm Euro 3 Transmission G 280-16/11.7-0.69 Front axle 9 t - Rear axle, crown wheel 300, planetary gears, 13.4 t Weight variant 41.8 t (7.5/7.5/13.4/13.4) Wheelbase 5450 mm Cab S-cab Classic Space Disc brakes, on front and rear axles Tank 290 l, left, 735 x 700 x 750 mm, Rear cab wall, with window - windshield tinted Roof hatch/vent flap roof Exterior sun visor, transparent Multi-function steering wheel Classic cockpit Air conditioning Cruise control Vehicle class N3G, off-road vehicle EuromixMTP - Concrete pump SWAN TSP 47-5 RZ Model: SWAN TSP 47-5 RZ Section: Concrete pump: Max. theoretical concrete capacity: m³/hr Max. theoretical concrete pressure: 85 bar Stroke rate 30 per min Delivery cylinder: Ø230 mm x 2100 mm stroke Hydraulic main cylinder: Ø2100 mm x Ø140 x Ø80 mm Concrete valve: S-valve, water pump: 20 l/min - bar Water tank: 800 l, 12 m hose with spray gun Concrete hopper: 600 liters Lubrication: Lincoln automatic lubrication for hopper group Hydraulic pumps: Rexroth 2xA4VG145, Rexroth A10VO28 Rexroth A17FO045, Blau Ascend AP 20.140/115 Switching system: Magnetic sensor (proximity switch) Switch cabinet: DIGITEX, waterproof Remote control: Scanreco remote control + 30 m cable Section: Boom: Boom S 47-5 (5-section boom, RZ folding) Type: RZ folding Max. vertical reach: 46.8 m (without end hose) Max. horizontal reach: 42.8 m (without end hose) End hose: 3m single flange, DN 125 Platform type: X-type Slewing ring: 365 degrees Slewing speed: 0.3 RPM Diameter of delivery line: 125 mm (outer diameter 132 mm) 5.5" flanges & couplings Control system Support width front: 8.6 m Support width rear: 8.7 m Your advantages • Immediately ready for use: Concrete pumps, concrete mixers, tippers, roll-off tippers • Chassis, structure and assembly from a single source • Fair prices • Financing in 19 European countries • Trade-in of your used vehicle Your contacts • Denis Omeragic: German, English, Bosnian, Croatian, Serbian • Henri Omeragic: German, Bosnian, Croatian, Serbian • Harun Cevik: German, English, Turkish • Jamila Azzi: French, Arabic • Olga Tissen: German, Russian • Karolina Cyburt: Polish EuromixMTP GmbH, Gänsekamp 7, 32457 Porta Westfalica Year of construction: 2025 Front axle 1: Steered Front axle 2: Steered Number of cylinders: 6 GVW: 44,000 kg

Condition: used, mileage: 50 km, power: 110 kW (149.56 HP), first registration: 02/2026, fuel type: diesel, overall weight: 3,500 kg, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 3, Equipment: ABS, air conditioning, airbag, central locking, cruise control, navigation system, onboard computer, parking sensors, power assisted steering, seat heater, sliding door, soot filter, trailer coupling, E07 Hill Start Assist, JA7 Blind Spot Assist, EY5 Mercedes-Benz Emergency Call System, F1K Coat Hook in Driver's Cabin, EY6 Breakdown Management, B25 Electric Parking Brake, G43 9G-TRONIC Automatic Transmission, AI1 Rear Axle Control Code Crown Wheel 215, L65 Ceiling Light(s) Cargo/Driver’s Cabin with Door Contact, RS3 Steel Wheels 6.5 J x 16, JK5 Instrument Cluster with Color Display, Z1N N1 Classification, LG7 LED High Performance Headlights, SE5 Driver’s Seat Lumbar Support, XO9 Mercedes-Benz MobiloVan with DSB and GgD, CN2 Radiator Grille Frame in Vehicle Color, M94 Vehicle without EU Speed Limiter, XG7 Without Payload Increase/Decrease to 3,500 kg, IR7 Wheelbase 4325 mm, Extended Rear Overhang, HH2 Electric Additional Warm Air Heater, T75 Grab Handles for Driver and Passenger Entry, T77 Grab Handle on Cargo Partition Sliding Door, W54 Twin Rear Doors, Opening Up to Sidewall, E1E Digital Extra: Hard Disk Navigation, HH9 TEMPMATIC Semi-Automatic Climate Control, E1D Digital Radio (DAB), Y10 First Aid Kit, MJ8 ECO Start-Stop Function, 805 AEJ X4/1, ES0 Jump Start Connector, D03 High Roof, ES5 Charging Package Instrument Panel, E1U USB Socket 5 V, MS1 Cruise Control, FM3 WET WIPER SYSTEM, Q22 Fixed Tow Bar Ball Head, T85 Entry Handle on Rear Left Pillar, HI1 Climate Zone 1 (Cold/Comfort), T86 Entry Handle on Rear Right Pillar, V43 Wooden Floor, V42 Lashing Rails on Sidewall at Waist Rail, XY5 Model Year 5, RM1 M+S Tires, C6L Multifunction Steering Wheel, LA2 Light Assist, ZM0 Panel Van, LA1 High Beam Assist, IT4 3.5 Tonner, J55 Seat Belt Warning for Passenger Seat, H16 Heated Driver’s Seat, J58 Seat Belt Warning for Driver’s Seat, H15 Heated Passenger Seat, J4V Pre-installation for Intelligent Tachograph. You can reach us by phone Monday – Friday until 8:00 PM and Saturday until 4:00 PM! Additional information: Leasing/financing and trade-in possible! Errors and prior sale excepted! All information without guarantee ... more on our homepage. Lhjdpfx Abjyz I E Ds Asn

Condition: used, Year of construction: 2018, Used Filling Monoblock for beer 800 bph Lhodpfxjw Tlz Ee Ab Asn Monoblock Structure The Used Filling Monoblock for beer 800 bph consists of three separate units: an automatic rinser, an isobaric filler with a double vacuum system, and a crown capper. This configuration optimizes the management of rinsing, filling, and sealing phases. As a result, the system ensures suitability for processing beer in 0.5-liter glass bottles. Moreover, this modular layout facilitates maintenance and replacement, therefore increasing operational reliability. Rotary Rinser ZPC-12 The rinser in the Used Filling Monoblock for beer 800 bph operates with a continuous rotation system and uses 12 gripping clamps. First, the operating cycle handles bottle entry. Then, it performs internal rinsing with treated water, followed by dripping and final exit. The machine handles glass bottles with a height between 150 and 330 mm and a diameter between 50 and 90 mm. It processes 600 to 800 bottles per hour. The installed motor delivers 1.5 kW of power. Additionally, the design allows rapid changeovers between bottle formats, which enhances production flexibility. Isobaric Filling with Double Vacuum The BFP-12 filling unit, at the heart of the Used Filling Monoblock for beer 800 bph, includes 12 filling valves and applies an isobaric process with double vacuum. Specifically, the system performs two evacuation cycles and CO₂ reinjections before the filling stage. Consequently, it significantly reduces residual oxygen and preserves beer quality. It supports bottle volumes from 250 to 1000 ml. Furthermore, the unit integrates key components such as a Southern Pump, a Mitsubishi PLC, a THINEDA touchscreen, Korean-made sensors, and AUTONICS pneumatic systems. This machine also operates with a 1.5 kW motor. In terms of control, the electrical interface provides real-time adjustments, thus improving accuracy during production. Crown Capping Machine ZDS-3 The crown capper of the Used Filling Monoblock for beer 800 bph applies metal crown caps to glass beer bottles. The machine includes 3 capping heads and operates with a continuous rotary motion. It handles bottles up to 330 mm in height and caps with diameters from 20 to 30 mm (cP size), compatible with the normal European neck type. Notably, the capper reaches up to 1500 bottles per hour, thereby providing an operational buffer that prevents bottlenecks downstream of the filler. In comparison to standard cappers, this model delivers greater precision and cap stability. In addition, its robust frame reduces vibration during high-speed operation. Electrical Characteristics and Compatibility The machines in the Used Filling Monoblock for beer 800 bph use reliable and industry-standard electrical components. The full line features an estimated total power consumption of approximately 4.5 kW. From an integration standpoint, this makes the system suitable for facilities with medium energy capacity. The system exclusively handles 0.5-liter glass beer bottles. During operation, it performs filling under controlled pressure to preserve CO₂ levels and ensure the product’s final stability. Overall, the system delivers consistent performance, reduced oxygen pickup, and excellent packaging quality. Lastly, the compact footprint simplifies installation even in limited space environments.