Used Colchester Mastiff 1600 for sale (2,569)

Condition: not inspected (used), functionality: unexamined, Balzers Todpfx Ajwnnz Esmrsc Model: TMH 1600 Model No.: PM P02 373 Further data see type plate image, device is untested.

Condition: used, Year of construction: 1996, bore capacity in steel (diameter) 60 mm arm length 1600 mm workpiece height max. ca. 1300 mm borehole diameter in Stahl 80 mm borehole diameter in Guss 100 mm threading in St 60 M55 mm spindle turning speed range 29-1.450 U/min Spindle Speed 12 Stück boring spindle 100 mm morse taper MK5 spindle stroke 350 mm total power requirement 7,5 kW weight of the machine ca. 4.600 kg Tjdpfxeyv N Ehe Amroc dimensions of the machine ca. 2600x1100x3200 mm

Condition: used, Alco twin shaft paddle mixer with cooling Model: AMP 1600 Capacity: 1600 l Tedpfxjy Algnj Amrsc Power: 15 kW Dimensions: 2800 mm x 1600 mm x 2100 mm

Condition: ready for operation (used), Year of construction: 2015, clamping force: 1,600 kN, This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced control systems for both injection units and supports multi-component processing. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 520 S 1600-290 / 290 hydraulic injection moulding machine we have for sale. Contact us for further details. • Injection units and plasticizing • 1st injection unit: • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • 2nd injection unit: • 2nd injection unit 290, vertical • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Open nozzle 30 mm with nozzle tip; extended nozzle tip +20 mm; radius 15 • Heating band for open nozzle • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • Standard worm gear coupling; coupling geometry: double-sided • Multi-component processing; parting line setup on short runners for 2nd injection unit • Injection closing with mold (“flying injection”) • Drive, hydraulics, and cooling • 65 l/min charging flow rate • Pressure accumulator module, 64 l storage volume (max. 230 bar); accumulator drive • Continuous oil cooling and filtration; increased cooling capacity • Machine cooling circuits controlled • Clamping system, ejector, and core pulls • Clamping plate set; central Ø 125 mm • Minimum installation height 450 mm (extended) • Ejector pressure P/Q controlled (requires T2); ejector cross • Core pulls: • Core pull 1 simultaneous movement (P/Q controlled, programmable) • Core pull 2 simultaneous movement (P/Q controlled, programmable) Tsdjyxdwdopfx Amrjc • Core pull 3 simultaneous movement (P/Q controlled, programmable) • Pneumatic core pull control 4 incl. pressure reducer • Electric core pull control 1 (requires VE 436/00) • Tool pneumatics/hydraulics connections • Electrical connection pneumatic NVD 1 (in tool) • Electrical connection pneumatic NVD 2 (in tool) • Electrical and hydraulic connection NVD 3 (in tool) • Electrical and hydraulic connection NVD 4 (in tool) • Blow-out device 1 with pressure reducer; connection for blow-out device 2 • Cooling water and mold circuits • Shut-off valve for cooling water (inlet); shut-off valve for cooling water (inlet 2) • Cooling water filter 100 µm (inlet) • 3 cooling water circuits to fixed mold plate; 3 cooling water circuits to moving mold plate • Basic equipment for 2nd cooling water distributor (manual) with 7 free cooling circuits • Control and electrics • Selogica direct control; technology level • Fuse protection for heating circuits (1–6 with 16 A) • 15 electrical heating circuits for mold heating • Boost function for heating circuits (hot runner) • Upper guard open, raised to safety clearance • Fault indicator with flashing light • Operator authorization with chip card (EUROMAP 65) • Interfaces and connectivity • Interface for conveyor belt (machine base) • Prepared for six-axis robot with SELOGICA interface • Robot interface (EUROMAP 67), 50-pin • Emergency stop interface (24-pin, 2-channel) • Basic equipment for electric axis control • Host computer interface OPC-UA • Temperature control unit interface (20 mA); temperature control cable HB-THERM • Serial printer interface USB; external USB keyboard interface

Condition: new, Year of construction: 2024, machine/vehicle number: FGWPEP37KJSA08192, fuel type: diesel, motor manufacturer: Perkins 1103A-33G1, General information Field of application: Construction Weights Empty weight: 818 kg Functional Generator capacity: 33 kVA Dimensions of cargo space: 185 x 93 x 139 cm CE mark: yes Other information Fuel consumption: 6.9 Liter per Hour Prime Generator: FG Wilson FGL20030 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 125 l Additional information Please contact Team DPX for more information = Additional options and accessories = Tsdpeylgv Ijfx Amrec - Battery - Control Panel - Steel canopy - Tank

Condition: used, Year of construction: 1991, total height: 2,100 mm, total length: 4,200 mm, total width: 1,700 mm, Colour: Green Empty weight: 4.000 kg - Year: 1991 - Documentation available: No - CE certificate present: No - Drive system: Conventional - Power [kW]: 5.0 - Number of axes [pcs]: 3 - X-axis travel [mm]: 1600 - Y-axis travel [mm]: 500 - Z-axis travel [mm]: 310 - Table width [mm]: 1730 - Table depth [mm]: 320 - Magnet width [mm]: 1600 - Magnet depth [mm]: 300 - Main spindle power [kW]: 5 - Options: Digital readout - Transport dimensions: 4200mm x 1700mm x 2100mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Tsdpfxsy Tug Ss Amrsc Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, CATALOGUE NUMBER RE060 - New machine TECHNICAL DATA - Blade diameter ⌀250 – 350/30 mm - Scoring blade diameter (only works with ⌀300, 350 mm blades) ⌀120/20 mm - Main motor power 4 kW - Scoring motor power 0.75 kW - Rotational speed 4000 rpm - Scoring blade rotational speed 8800 rpm - Blade tilt 0 – 45° - Max. cutting length 1600 mm - Cutting width with parallel guide 1250 mm - Sawtooth blade ⌀350 mm - Arbor flange diameter 87.5 mm - Table fence adjustable to 90° – 45° angle, accuracy ±1° - Max. cutting height with ⌀300 mm blade, 95 mm - Max. cutting height with ⌀350 mm blade, 120 mm - Upper dust extraction port diameter ⌀80 mm - Lower dust extraction port diameter ⌀100 mm - Weight 480 kg Tjdpfx Aszrk N Rsmrjc - Dimensions of folded machine 2020x3380x1200mm Net price: 16000 PLN Net price: 3721 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (Prices may be subject to change in case of significant exchange rate fluctuations)

Condition: used, functionality: fully functional, Year of construction: 2020, table length: 2,270 mm, table width: 1,600 mm, working length: 2,270 mm, working width: 1,600 mm, travel distance X-axis: 2,270 mm, travel distance Y-axis: 1,600 mm, cutting speed: 60,000 mm/min, positioning accuracy: 0.005 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, total length: 3,990 mm, total width: 2,340 mm, total height: 1,600 mm, Equipment: cooling unit, dust extraction, fume extraction, We offer this used eurolaser LCS G3 XL-1600 laser cutting machine, year of manufacture 2020. System type: LCS G3 XL-1600 Serial number: 1308S8364P Year of manufacture: 2020 - Voltage: 400V/50Hz - Operating temperature: +10° to 32°C - Working area: 2,270 x 1,600 mm - Maximum material width: 2,350 mm, unlimited length - Cutting speed: 1–1000 mm/s - Axial acceleration up to 9.3 m/s² - Measuring system accuracy: 0.005 mm - Servo-controlled DC motors - Dimensions: 3990 x 2340 x 1600 mm - Hardware interface: RS 232C - Software: HPGL - LCD control panel - Two lenses – 5" and 7.5" - Laser Scout Connect (LS-CON) cutting software: Includes post-processor for laser system control and LaserScout PLANNER module for cutting time calculation. - Watchdog (E-WD): Monitoring and remote diagnostics of key system functions in real time. Tsdpjyu N H Ujfx Amrec - LaserScout POSITION+ (LS-POS+): POSITION is a software package for working with a camera to recognize reference marks. The package also includes a camera and the Planner for cutting time calculation. - Cooling unit (CU-450): Water-to-air closed-loop cooling unit Ambient temperature: +10° to +32°C Voltage: 400V, 3~, 50Hz - Top extraction (EU-015-1): 1 x 1.5 kW vacuum motor Automatic voltage protection Voltage: 400V, 3~, 50Hz - Extraction unit (EU-030-2): 2 x 3.0 kW vacuum motors Automatic voltage protection Voltage: 400V, 3~, 50Hz - Raster cutting table (RP-XL32): Black anodized perforated table - PC, 21” monitor If you have any questions or need more information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Description for posting on Machineseeker: Hydraulic die casting machine TECNOFOND MR 1600 R – fully functional, Siemens control system. For sale: hydraulic die casting machine TECNOFOND MR 1600 R, manufactured in 1999, made in Italy. The machine is in perfect working order, operates correctly, and is ready for continued production. The die casting machine was used in our foundry for the production of aluminum castings. Tjdpfx Aez Ey Hpemrsc The machine has been modernized – the control system has been replaced with a Siemens system. In addition, the set includes reducing plates, which allow the machine to be adapted to different die and mold dimensions. Technical data: - Manufacturer: TECNOFOND S.n.c. – Italy - Model: MR 1600 R - Year of manufacture: 1999 - Type: hydraulic die casting machine - Maximum working pressure: 60 bar - Control system: Siemens – after modernization - Additional equipment: reducing plates - Application: production of aluminum castings The machine is in good technical condition, is fully functional, and can be inspected during operation before purchase. The sale is related to the modernization of the machine park and the reorganization of production.

Condition: new, For sale: high-quality industrial Siemens SIMOTICS motor. Todsyx I Slopfx Amrec Condition: new, unused, original packaging (warehouse stock, may show slight marks from storage). 🔧 Technical data: Manufacturer: Siemens Model: 1FE1093-6WU11-1BN2-Z Serial number: YFJ86378498 001 Type: 3-phase motor (servo / torque motor) Voltage: 425 V Current: 43.0 A / 60.0 A Power: 16.8 kW / 21.5 kW Rated speed: 1600 rpm Max speed: 7000 rpm Max torque: 165 Nm Rated torque: 86 Nm Protection class: IP00 Insulation class: 155 (F) Duty type: S1 Cooling: water-cooled (8 l/min, max 25°C) Standard: EN 60034 Temperature sensor: KTY84-130 📏 Construction: direct drive (torque motor) high-precision manufacturing intended for industrial applications without gearbox 💡 Applications: CNC machines drive axes industrial automation production lines 📦 Included: Siemens motor original packaging

Condition: used, Year of construction: 2015, functionality: fully functional, total height: 3,840 mm, total width: 4,200 mm, total length: 10,840 mm, overall weight: 73,500 kg, Oskar Frech GmbH & Co. KG Cold chamber die casting machine DAK 1600-133 and additional equipment The system is used for the production of die castings made of aluminum, magnesium, or copper alloys, which are manufactured using the cold chamber die casting process. Clamping force 16,000 kN Clamping stroke 1,200 mm Casting volume 3,014 – 12,057 cm³ Total weight of the system 73,500 kg Dimensions of the system Length 10,840 mm Width 4,200 mm Height 3,840 mm The system is equipped with the following additional units: Metering furnace, manufacturer Westomat, type 1700 S, capacity 1,700 kg Mold release spray system, manufacturer Gerlieva, type GS 1600/1800 T Metering furnace, manufacturer Meltec AVDF 1800/10 K, consisting of an aluminum melting furnace and a vacuum metering unit. The entire system is designed to allow fully automated operation for die casting of workpieces when used in conjunction with automation components. All necessary interfaces for communication and monitoring are available. Oskar Frech GmbH & Co. KG is one of the leading manufacturers of die casting machines worldwide. The DAK 1600-133 is the largest machine in the smallest series currently manufactured by Frech. Automation of the die casting system, manufacturer Frech, type DAK 1600-133, using an automation cell, manufacturer Reis. Tedpfx Amjz Eblajroc These units are primarily used for removing the workpieces produced by the DAK 1600-133 die casting machine.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, operating hours: 1,500 h, power: 18.5 kW (25.15 HP), travel distance X-axis: 1,600 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 815 mm, workpiece weight (max.): 2,300 kg, number of axes: 4, number of slots in tool magazine: 36, controller manufacturer: Fanuc, Equipment: CE marking, documentation/manual, USED Akira Seiki 1600XP Fanuc 0iMF Open Fronted Vertical Machining Centre with Fanuc Ex Stock - Subject to Prior Sale. YOM 2020, Machine with Very Low Hours Usage. Approx 1500 Hours  12,000 RPM Spindle with Refrigeration System  36 Station Arm Type ATC  Full Splash Guard  Fully Integrated Detron GXA-255h 4th Axis Nc Rotary Table with SR255H Tailstock Support Unit  Chip Conveyor & Chip Bin (Scraper Type)  Chip Flushing System Including Coolant Wash Gun  Through Spindle Coolant System - 35 Bars with Filter  Fanuc Memory Extension - 2 Mb  Fanuc 10.4 “ Screen with Manual Guide-I  Coolant Tank Capacity - 640 Litres  THK Heavy Duty Linear Guideways  Manual Pulse Generator  3 Colour Signal Lamp  Automatic Lubrication System  Rigid Tapping & Helical Interpolation Function TABLE Working Surface 1,750 X 800 MM Tee Slots 18 x 125 x 6.0 MM Spindle Nose to Table 100 ~ 915 MM Spindle Centre to Column 865 MM Table Load Capacity 2,300 KGS TRAVEL Todpfju A U Nkox Amrec X-Axis Travel 1,630 MM Y-Axis Travel 850 MM Z-Axis Travel 815 MM SPINDLE Spindle Nose Taper BT-40 Spindle Speed - Max 12,000 RPM FEED Rapid Traverse (X & Y-Axis) 33 M / MIN Rapid Traverse (Z-Axis) 25 M / MIN Cutting Feedrates - Max 12 M / MIN ACCURACIES Positioning 0.01 MM Repeatability + - 0.003 MM ATC Tool Storage Capacity ARM TYPE - 36 STATIONS Maximum Tool Weight 7.0 KGS Tool Diameter - Max 75 MM Tool Length - Max 250 MM Tool Shank BT-40 Tool Exchange Time 2.2 SEC MOTOR Spindle Drive Motor (FANUC) 18.5 KW POWER SUPPLY Voltage 415V / 3PH / 50HZ Power Requirement 30.0 KVA MACHINE DIMENSIONS Machine Floor Space Requirement 4,820 x 3,576 MM Machine Weight 12,600 KG

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, total length: 700 mm, total width: 1,600 mm, total height: 850 mm, Work table AT 1600 with stainless steel top and sliding doors Work table, baker's/pastry chef's table with stainless steel work surface and shelf at the back Tsdpjzfxykjfx Amrec sliding doors with intermediate shelf underneath stainless steel design Dimensions approx.: 1600 x 700 x 860 mm, W x D x H Used equipment Come and visit us!

Condition: ready for operation (used), Year of construction: 2008, operating hours: 1,752 h, functionality: fully functional, machine/vehicle number: 2052592, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 813 mm, table load: 4,536 kg, spindle speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 1,626 mm Travel range Y-axis: 1,270 mm Travel range Z-axis: 813 mm Table length: 1,626 mm Table width: 914 mm Table load: max. 4,536 kg Spindle speed: 6,000 rpm Drive system: geared head Torque: max. 610 Nm at 500 rpm Power: max. 22.4 kW Thrust force X/Y axis: max. 24,910 N Thrust force Z axis: max. 33,362 N Rapid traverse: max. 13.7 m/min Cutting feed rate: max. 12.7 m/min Tool diameter with full tooling: max. 102 mm Tjdpfx Aszd Tcdsmroc Tool diameter with free adjacent positions: max. 254 mm Tool-to-tool time: 10.3 s Chip-to-chip time: 12.6 s MACHINE DETAILS Dimensions (L x W x H): 3,660 x 3,880 x 3,190 mm Operating hours (see image) Spindle hours: 1,752 h Servo hours: 15,789 h

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 2,000 kg, lifting height: 1,600 mm, load center: 600 mm, mast type: simplex, fork length: 1,150 mm, tire condition: 100 %, front tire type: polyurethane tires (non-marking), empty load weight: 250 kg, total height: 2,030 mm, total length: 1,642 mm, total width: 740 mm, color: yellow, Equipment: pallet forks, A mast trolley with a lifting capacity of 2000 kg is a versatile device used for unloading delivery vehicles as well as for work in warehouses and shops. Its solid construction ensures long service life, while the polyurethane wheels provide quiet and trouble-free operation. Technical Specifications Load capacity: 2000 kg Lifting range: 85–1600 mm Fork length: 1150 mm Mast type: single mast Overall height: 2030 mm Height with forks raised: 2030 mm Overall length: 1642 mm Fork outer width: 550 mm Overall width: 740 mm Net weight: 250 kg Number of wheels (front/rear): 2 / 2 Wheel and roller material: polyurethane Steering wheel dimensions: 180 × 50 mm Roller dimensions: 75 × 70 mm Load center: 600 mm Tjdpfxjytcmrs Amrec Fork width: 160 mm Fork height: 60 mm Fork inner width: 390 mm Adjustable fork spacing: Yes Delivery to the customer is possible. The delivery cost is determined individually according to the carrier’s quotation. Should you be interested in other machines please visit our website.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, saw blade diameter: 450 mm, cutting height (max.): 100 mm, cutting width (max.): 200 mm, type of input current: three-phase, year of last overhaul: 2025, For sale: Metal Technika OWD-1600 Optimizing Saw / Cross-cut Saw, year of manufacture 2018. The machine is fully operational, ready for immediate use – ideal for fast cutting of components in serial production. A major advantage of this machine is its ability to set a cutting schedule for up to 8 positions: you simply set the dimension and the quantity, and the machine automatically performs cutting and proceeds to the next positions without the need for tool changes. Technical Data: Model: Metal Technika OWD-1600 Year of manufacture: 2018 Maximum material width: 200 mm Maximum material height: 100 mm Maximum board length: 3200 mm Feed speed: approx. 30 m/min Todpfxoyv Ewms Amrjc Saw blade diameter: min. 400 mm / max. 500 mm Motor speed: 2800 rpm Spindle speed: approx. 6000 rpm Power supply: 3x 400V Power: 7 kW Medium: air 6–7 bar Weight: approx. 1500 kg Performance: The machine operates efficiently – for example: - Batch of 8 boards, 12 mm thick each - Board length: 2800 mm - Cutting into 3 elements (approx. 700 mm) - Cycle time: about 10 seconds The machine can be inspected and tested on site. Location: Elbląg / Warmińsko-Mazurskie, Poland For further questions, please contact me.

Condition: new, Year of construction: 2024, R5 RA 1600 B 4EB XXXZ 4.00 PCS 05.12.2023 25,000.00 / 1 PCS 100,000.00 Explosion protection Ex Inside II 2G Ex h IIB T3 Gb X Outside II 3G Ex h IIB T3 Gc X Without motor Ex B5-550 d65 50/60Hz Coupling PKZ 20 ATEX Oil separator with: - Antistatic venting element - G3/4 for thermostat probe Heat exchanger 41.2kW without air cooler Base frame with bore d50 Vibration dampers 4xd100 + 3xd150 Cooling water inlet G1/2 vertical with temperature controller Water valve, bypass with ball valves, G1/2 coupling Cooling water outlet G1/2 vertical with G1/2 coupling Ball valve DN25 G1 in oil drain Without temperature switch in gas Without temperature switch in oil Without level switch G3/4 Filter differential pressure gauge elevated with angle Thermometer 0-120°C R1/2 with extension Without resistance thermometer PT100 valve side 4 units available Unit price !!!!! Tjdpfeyzbd Tox Amroc

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 15,000 h, punching force: 18 t, sheet thickness (max.): 8 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,550 mm, workpiece weight (max.): 230 kg, MACHINE DETAILS Format: Large format Beam operating hours: 15,000 hours Laser operating hours: 59,000 hours EQUIPMENT Tjdsza Urgjpfx Amroc Sheetmaster Toolmaster Note: The machine will continue to be operational until 07/09/2026! The following data is taken from a manufacturer's data sheet. The seller cannot guarantee the accuracy of the data (the data sheet is attached to the listing): TECHNICAL DETAILS Travel range X-axis: 3,050 mm Travel range Y-axis: 1,550 mm Sheet thickness max.: 8 mm Punching force max.: 180 kN Workpiece weight max.: 230 kg

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 800 mm, table load: 4,600 kg, overall weight: 18,600 kg, spindle speed (max.): 8,000 rpm, number of axes: 3, This 3-axis Johnford VMC-1600S was manufactured in 2014. It features a longitudinal travel of 1600 mm, cross travel of 1100 mm, and vertical travel of 800 mm. The machine has a robust table working surface of 1800 x 1000 mm and a maximum table load capacity of 4600 kg. If you are looking to get high-quality milling capabilities, consider the Johnford VMC-1600S vertical machining centre we have for sale. Contact us for further details. • Table working surface: 70.9” x 39.4” (1800 x 1000 mm) • Spindle nose to table: 5.9”–37.4” (150–950 mm) • Spindle center to column: 45.3” (1150 mm) • Spindle taper: • VMC-1600S: BT-40 / CAT-40 • VMC-1600SHD: BT-50 / CAT-50 • Spindle diameter: • VMC-1600S: 2.75” (70 mm) • VMC-1600SHD: 3.9” (100 mm) • Spindle speed: Tedpfx Amoy A Ik Ajrec • VMC-1600S: Auto Hi-Lo Gear 80–8000 rpm • VMC-1600SHD: Auto Hi-Lo Gear 10–4500 rpm • Spindle motor: • VMC-1600S: 15/10 HP (15/20 HP optional) • VMC-1600SHD: 25/20 HP • Rapid traverse (X/Y/Z): 18 / 18 / 12 m/min • Feed (spindle): 1–12,000 mm/min • Tool selection: Bi-direction random type, shortest path • Number of tools: • VMC-1600S: Armless 24; Arm type 24/32 (optional) • VMC-1600SHD: Armless 20; Arm type 24/32 (optional) • Max tool diameter: • VMC-1600S: 4” (100 mm) • VMC-1600SHD: 9.8” (250 mm) • Max tool length: • VMC-1600S: 12.5” (320 mm) • VMC-1600SHD: 15.7” (400 mm) • Max tool weight: • VMC-1600S: 22 lbs (10 kg) • VMC-1600SHD: 33 lbs (15 kg) • Floor space: 177.2” x 209.8” (4500 x 5330 mm) • X/Y/Z ballscrew diameter: φ50 / φ63 / φ50 • Cutting capacity (S45C): • Milling: 180 cc/min (S) / 320 cc/min (SHD) • Drilling: φ40 mm (S) / φ52 mm (SHD) • Tapping: M30 x P3.5 (S) / M50 x P4.5 (SHD)

Condition: ready for operation (used), Year of construction: 2015, operating hours: 10,615 h, functionality: fully functional, machine/vehicle number: 108.007.00.0065, travel distance X-axis: 1,600 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 800 mm, table load: 2,000 kg, spindle speed (max.): 10,000 rpm, The payment deadline for the machine is November 20, 2025! Placing a bid obligates you to collect the machine on time, between December 1, 2025 and December 5, 2025! Transport dimensions of the machine body (L x W x H): 4,500 x 2,900 x 3,200 mm TECHNICAL DETAILS Work Areas Travel X-axis: 1,600 mm Travel Y-axis: 900 mm Travel Z-axis: 800 mm Feed Drive Feed rate X-axis: 14 m/min Feed rate Y-axis: 14 m/min Feed rate Z-axis: 12 m/min Rapid traverse X-axis: 24 m/min Rapid traverse Y-axis: 24 m/min Rapid traverse Z-axis: 20 m/min Work Table Table dimensions: 1,700 x 850 mm Maximum table load: 2,000 kg Tjdoxnkqaepfx Amroc Number of T-slots: 7 T-slot spacing: 100 mm Distance spindle nose–work table: min. 100 mm / max. 900 mm Spindle speed: max. 10,000 rpm Tool holder: ISO 40 Number of magazine slots: 30 Max. tool diameter without adjacent free spaces: 85 mm Max. tool diameter with adjacent free spaces: 150 mm Max. tool length: 305 mm Max. tool weight: 6 kg MACHINE DETAILS Control: HEIDENHAIN TNC 620 Dimensions & Weight Dimensions (L x W x H): 4,600 x 3,900 x 3,300 mm Weight: 16,000 kg Transport dimensions of the machine body (L x W x H): 4,500 x 2,900 x 3,200 mm However, the height can be reduced to 2,900 mm. Coolant system Capacity: 540 l Operating Hours Spindle hours: 10,615 h Power-on hours: 30,204 h EQUIPMENT 3D probe Technical documentation

Condition: excellent (used), Year of construction: 2015, operating hours: 1 h, functionality: fully functional, machine/vehicle number: Z000071400101, total width: 1,400 mm, total length: 2,050 mm, total height: 2,150 mm, type of input current: three-phase, overall weight: 1,100 kg, Powerful industrial blower suitable for a variety of applications. The stationary fan with a 600 mm diameter can be used for cooling, ventilation, heat dissipation, or for displacing water mist and dust. Todpfewbfm Sox Amrsc The unit has four rollers and forklift pockets for loading. Electric motor power (blower): 15 kW Air flow rate: 33,000 m³/h Speed: 13.8 kW / 1470 rpm Electrical connection: 400 volts / 50 Hz / 32 amps Cable length: 5.0 m Pickup and inspection available in D-89188 Merklingen.

Condition: repair required (used), functionality: not functional, clamping force: 1,600 kN, screw diameter: 50 mm, clearance between the columns: 470 mm, For sale is an injection molding machine from the Arburg brand and the type 470 C 1600-800 The pump and a card have been removed from the machine, so the machine is being sold as defective. It is otherwise in very good condition Technical data: Pump hours: 61,400 Clamping force: 1600 kN Clear column spacing: 470*470 Ejector travel: 225 mm Tedpfxov Edrie Amrec Screw diameter: 50 mm Displacement: 398 cm³ Dimensions: 4335*1635*1950 mm Weight: 6950 kg The machine is offered without peripherals Transport and loading can be organized throughout Europe on request for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, visit us on our website

Condition: good (used), Year of construction: 2006, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,016 mm, travel distance Z-axis: 813 mm, overall weight: 13,611 kg, table length: 1,626 mm, table width: 914 mm, controller model: HAAS, nominal power (apparent): 22 kVA, rotary table diameter: 760 mm, spindle speed (max.): 6,000 rpm, table load: 4,536 kg, Equipment: chip conveyor, IBN 03/2006 IKZ 70 bar (TSC 1000) Tjdpfx Ajvgmr Ijmrec WZW 30-fold (BT50) Full 4th axis Spindle & gearbox new in 2017 1-shift operation Machine can be inspected under power !!!! free loading until CW04/2025 !!!! (with same-day delivery of our new machine)

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, operating hours: 5,861 h, load capacity: 1,600 kg, lifting height: 3,900 mm, fuel type: electric, Stöcklin electric high lift truck with initial lift EHI 1600-SEV • Battery NEW • with charger • with initial lift Todpov Dtytjfx Amrec • Year: 2008 • Load capacity: 1,600 kg • Lifting height: 3,900 mm • Operating hours: 586

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 1,600 mm, travel distance Y-axis: 810 mm, travel distance Z-axis: 700 mm, controller manufacturer: HEIDENHAIN, controller model: ITNC 640, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis SPINNER MVC 1600-N was manufactured in 2016. Ideal for precision machining, this vertical machining centre ensures reliable performance and durability. Consider the opportunity to buy this SPINNER MVC 1600-N vertical machining centre. Contact us for more information. Additional equipment • Accessories: Chip conveyor Machine Benefits Technical Machine Benefits • Table size: 1800 x 810 mm Tsdpfeyallqjx Amrjc • Allowed weight: 2000 kg • Automatic tool changer: atc 24 positions Extra Information Machine still under power Technical Specification Through-spindle Coolant Yes