Used Clyde Denseveyor Dense Phase Conveying Vessel for sale (12,151)

Condition: ready for operation (used), Indramat 2AD132B-B050A1-BS03-B2N1, 3-phase induction motor, serial number: 2AD132-14444, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. PLEASE NOTE: Please request separate quotes for packaging and shipping costs! Gsdpfei D Ifvex Akyebu

Condition: good (used), Ultrafilter ultraaqua autoclean 0016 AC Donaldson Ultrafilter ultrafiltration system for compressed air compressor condensate Oil/water separator for compressed air condensate ● Treatment system for separating compressed air condensate and condensates with difficult separation properties (e.g., stable emulsions) using cross-flow filtration. ● Physical separation principle guarantees residual oil content of < 5 mg/l in water. ● Intelligent control concept with programmable controller for safe system operation, including plain text display via a text display, fault monitoring via alarm messages with potential-free contacts and optional external network connection. Gbodpfx Aksidx Uieyeu ● Optimized cleaning by comparing input/output, which extends cleaning intervals and saves operating costs. ● Thermally and chemically highly resistant ceramic membrane with a long service life. ● Frost protection with integrated heater. ● High-quality, corrosion-resistant materials for tanks, pipelines, pumps, seals, and valves. Manufacturer: Donaldson Ultrafilter System type: ultraaqua autoclean 0016 AC Electrical data: 3 x 380 V, 50 Hz, 2.6 kW Compressed air: pmin: 5.5 bar, pmax: 8.5 bar, Pneurop 4 Water: pmax: 5 bar Membrane: pHmin: 1, pHmax: 11, tmin: 5°C, tmax: 70°C You can find other filtration systems in different sizes – new and used – in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2014, functionality: fully functional, Güntner Axial Fan Condenser. Gbodpfx Akeygyd Isyou Also suitable for water cooling. Other sizes of vertical and horizontal condensers are also available (also suitable for water cooling, pictures can be found in the ad). Located in Vacegres, Hungary (EU).

Condition: as good as new (ex-display), Industrial Heat Exchanger, Gas Cooler, Air Conditioning Cooler, Güntner, Used Machine Manufacturer: Güntner GmbH & Co. KG Type: GCVC RD 035.1/13-42-0007063P Overall dimensions: Width: 2450 mm Depth: 600 mm Height: 760 mm Year of manufacture: 2016 Fan data: Fan type: VT03167U Speed: 2723 / 1390 min⁻¹ Current consumption: - / 0.62 A Technical specifications: Volume: 6.8 liters Gbedpfjy Udaqex Akyju Maximum permissible pressure: 32 bar / 0 bar 0 / -1 bar Permissible temperature range: -50 °C / +100 °C -5 °C / +40 °C Test pressure: 35.2 bar Fluid group: 2 / gaseous state

Condition: new, Year of construction: 2026, Automatic Slitting & Cut To Length Line Coil Slitting and Cut To Length Production Line for Sheet Metal Processing The Automatic Slitting & Cut To Length Line is designed for longitudinal slitting and cross cutting of sheet metal coils into strips and flat sheets with programmable lengths. The production line combines several operations in one compact system: Coil feeding Slitting Precision leveling Servo length measuring Cut-to-length part Finished sheet conveying Automatic stacking The machine is suitable for processing galvanized steel, pre-painted steel and other coated sheet materials used in HVAC production, roofing, facade systems, roll forming and general sheet metal fabrication. Main Features Combined slitting and cut-to-length production Fully automatic operation Hydraulic cutting system Precision sheet leveling Servo-controlled length measurement PLC controlled production Touchscreen operator interface High production accuracy Compact machine layout Reliable industrial construction Material Processing Suitable materials include: Galvanized steel (GI) Pre-painted galvanized steel (PPGI) Coated sheet steel The slitting section is equipped with hardened tooling designed for accurate strip production. The slitting system provides accurate strip widths with stable cutting quality during continuous production. The production line is equipped with an automatic hydraulic cut-to-length system. Typical cutting tolerance: ±2.5 mm for sheet lengths up to 5000 mm ±3.0 mm for sheet lengths between 5000 and 10000 mm Drive System The roll forming and feeding system is powered by: Main motor: 4 kW Hydraulic power unit: 3 kW Power transmission: Chain drive Industrial gearbox Heavy-duty mechanical transmission Control System Technical Specifications Parameter Specification Machine Type Automatic Slitting & Cut To Length Line Material GI / PPGI Godpfx Akezrwhmjysbu Maximum Coil Width 1000-1250 mm Material Thickness 0.25–0.1 mm Minimum Slitting Width 60 mm Heavy-duty 120 mm shaft diameter Maximum Number of Slitting Knives 5 Production Speed 10–15 m/min Main Motor 4 kW Hydraulic Power 3 kW Cutting Accuracy ±2.5 mm (≤5000 mm) / ±3 mm (5000–10000 mm) Cutting Type Hydraulic Cut To Length Transmission Chain Drive Machine Structure Wall Plate Frame + Column Cutting Structure Machine Dimensions Approx. 2500 × 1500 × 1400 mm Electrical Supply 380 V / 50 Hz / 3 Phase The production line is suitable for manufacturing: HVAC duct blanks Ventilation components Roofing sheets Wall cladding panels Roll forming blanks Sheet metal parts Laser cutting blanks Press blanks Electrical cabinet panels Industrial sheet products Advantages Slitting and cut-to-length in one production line Compact machine footprint High processing accuracy Low maintenance requirements Fast production changeover Automatic sheet stacking High productivity Reliable hydraulic cutting Precision leveling Suitable for continuous industrial production Standard Equipment Depending on customer requirements, the production line can be supplied with: Manual decoiler Hydraulic decoiler Double decoiler Coil loading car Protective film laminating unit Different slitting knife configurations Increased material thickness capacity Different coil widths 1.5 m conveyor table 3.0 m automatic stacking system

Year of construction: 2022, condition: excellent (used), functionality: fully functional, System: SARTORIUS BIOSTAT-B Reactor: SARTORIUS UNIVESSEL Glass double wall (2Lx1, 1x1) Sensors: BioPAT Trace Gbsdpfevz Artox Akyeu Software: BioPAT MFCS4 Chiller: EYELA CA-1116A YOM: 2022 Excellent condition, please check out our other listings as well.

Condition: new, Siemens 6SL3000-0DE28-0AA0 3-phase HFD line reactor, unused in opened original packaging, 100% functional, scope of delivery as per photos. Gjdpoxag Sdofx Akyebu

Condition: ready for operation (used), Siemens 6SL3000-0DE31-2AA1 3-phase HFD line reactor 120kW Version A SN SB09558971012, used, in good condition, 100% functional, scope of delivery as per photos NOTE: Please enquire separately for packaging and shipping costs! Gbjdpfox Dxghsx Akyeu

Year of construction: 2016, condition: as good as new (ex-display), Axial fan condenser, air ccoler Manufacturer: Güntner Model: GCVC RD 035.1/12-42-0007305P Year of c.: 2016 Gedpfxjnbff Aj Akysbu 2 fans Volume: 4,6 l Comressed air: 32,5 bar

Year of construction: 1994, condition: excellent (used), For sale are 2 units of coal dust silos. Capacity: 120 m³ per unit. Silo material: S235 Discharge cone material: Stainless steel, from Ø 250mm to Ø 1450 mm. Diameter: 3.40 meters. Silo height: 20.6 meters. Total height: 24 meters. Weight: 22 tons. Explosion vent: DN 1300. Implosion vents: 2x DN 500. Silo filter: Ø900mm Infra Jet AJP 304 (30m²). Gjdpoh Dix Ijfx Akyebu Filling line: DN100. Discharge cone: 70°. Air fluidization with 6 nozzles. Level measurement: Endress Hauser Soliphant. Discharge/dosing with dense-phase conveying. Manufacturer: Altmayer Airdos PDF 800. Rotary airlock: DN 250, manufacturer Kreisel. Dismantling has already been carried out; the silos are stored and immediately available.

Condition: used, Condensate drain, filter control valve, switch-on valve, maintenance unit, water separator Gjdsdkqhbepfx Akysbu -Connection: G 1/4 -Number: 9 pieces available -Price: per piece -Dimensions: 50/H120 mm -Weight: 0.37 kg

Condition: as good as new (ex-display), Condenser, air-cooled condenser, industrial refrigeration condenser, commercial cooling unit, Güntner GCHC RD 063.1/13-44-0003686A Manufacturer: Güntner GmbH & Co. KG Type: GCHC RD 063.1/13-44-0003686A Serial No: X101039624-1370003686A Dimensions: 3684x1088x965mm Gbjdpfx Aoy S T D Hskysu -fan diameter: 630 mm -number of fans: 3 pcs -refrigerant: HFC / HFO -max. airflow: ~11485 m3/h -max. allowable pressure: 41 bar

Condition: used, Flowveyor International Ltd aeromechanical conveyor Cable conveyor Suitable for conveying powders Tube diameter: 76.1 mm Conveyor made of stainless steel Cable is made of food-grade plastic-coated cable Motor power: 1.5 kW Lifting height: 2350 mm (adjustable) Gjdpjyf Aztjfx Akyjbu See our other listings VMA Wekerom

Condition: used, Year of construction: 2021, Manufacturer : Brouillon Process Model: 884-H-EAU Year : 2021 Type : Off-axis tilting cooking vessel   Useful capacity : 400 L Material : 304 L stainless steel Diameter : 884 mm Operating pressure : 6 bar Maximum temperature: 110°C Double jacket volume: 32.5 L Mixer: 2 stainless steel anchors, each fitted with an inclined PTFE scraper Speed: 7 - 25 rpm Recycling loop on the double jacket for temperature control Flush drain valve at SMS76 outlet, electro-pneumatically controlled Stop cooking function / mains water cooling Total empty weight: 1200 kg Gbedpfxjygnclo Akysu

Condition: ready for operation (used), Guntner Condenser Type: GVH 090.2A/2x5-N(D) Cooling capacity: 1057.2 / 920.7 kW Airflow: 279,000/229,000 m3/h Number of fans: 10 x 900 mm Unit dimensions: 10200 x 2300 x 1450 mm RPM: 890/700 Capacity: 323.8 L Weight: 2,282 kg Stock: 2 pieces Stock number: SK 108 Gbodpfx Aoqi Ekwekyou Condition: Used, good

Condition: excellent (used), Danfoss Optyma™ PLUS condensing unit -Type: OP-LPHC271NTP00E 114x3480 Gsdpju Hgcdsfx Akyjbu -Compressor type: NTZ271A4LR1B -Cooling capacity for R404A: 14.24 kW at -10°C/40°C, 10.97 kW at -25°C/40°C, 8.24 kW at -30°C/40°C -Dimensions: 1600 x 540 x 1800 -Weight: 325 kg -Number of fans: 2 x 600 mm -Stock: 1 piece -Stock number: AG 177 -Condition: used

Condition: used, Condenser Guntner -Type: S-GVH 080.1A/3-N(S) -Capacity: 244 kW Gjdpoy R Rzgofx Akyobu -Number of fans: 3 x 800 mm -Stock number: SK 171 -Stock quantity: 1 -Condition: Used, very good, ready for operation

Condition: as good as new (ex-display), Please contact us for technical specifications. Gedpfx Aez A S Dhekyobu

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, cooling capacity: 680 kW (924.54 HP), Equipment: cooling unit, condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture:2004 Nominal power 680.4 /579.2 kw Refrigerant:R404 Refrigerant content:218.9+25 liters Flow rate: Temperature range: -50°C- +100°C Max pressure: Operating pressure: 28bar/-1bar (performance depends on usage parameters) Number of fans: 5 pcs, diameter 900 mm, Air flow:162500 /131000 m3/h Motor power consumption:17.60/11.50 Kw Gjdpfovllxdox Akysbu Heat exchanger aream2 Operating noise 52 dB Length: mm Height: mm Width: mm Weight: ca kg The radiator has been technically inspected, fully functional

Year of construction: 2013, condition: used, functionality: fully functional, FOR SALE: WASTEWATER PRE-TREATMENT SYSTEM Gbjdpfxsz Eiigo Akysu Due to the expansion and relocation of our winery, the wastewater pre-treatment system, belonging to the ÉSE series of Élinvest Kft., is now available for sale. The system operated flawlessly from 2013 to 2024 with regular maintenance. Technical specifications: Untreated raw wastewater enters an oversized sump below the filter unit, from where a transfer pump with a capacity of approximately 25 m³/h conveys it to the pre-filter unit. The system filters the technological wastewater generated during operation through a Ø1 mm filter screen within 10 minutes of its generation, in automatic mode. Solid materials larger than 1x1 mm are collected in a 240-liter, covered plastic container, while the water phase containing dissolved and suspended solids flows by gravity to a transfer well that also collects municipal wastewater. After the completion of the harvesting operations, the wastewater discharge rate decreases to 20-40% of the harvesting water flow. This water is usually acidic; therefore, the discharge pH can be adjusted by adding a solution of sodium hydroxide (20-30% concentration). A pH control unit, suitable for dispensing both acid and alkali, maintains the pH of the treated wastewater within the specified limits (5.5 and 10). The operation and control are performed by a pH probe and a custom electrical control panel. The rotating drum of the filter unit is cleaned with a rotating brush and an intermittently operating pressure booster connected to a water supply with a minimum pressure of 4 bar. The construction technical approval number for the filter system is ÉME É-61-2011. The average wastewater discharge is 3-10 m³/day. The maximum instantaneous wastewater flow is 10 m³/h, and 25 m³/h in case of an emergency.

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: Custom made, type of input current: three-phase, total width: 1,800 mm, total length: 14,650 mm, input voltage: 400 V, input current: 16 A, cutting width (max.): 1,800 mm, 22 C – Finn-Convey Industrial Spreading Line (14.65 m x 1.8 m) – Complete with Air-Flotation Description For sale is a professional-grade Finn-Convey industrial fabric spreading and cutting table line, offered as a complete production-ready system. This system is designed for efficient fabric spreading and preparation in high-volume cutting room operations. It enables controlled handling of heavy fabric rolls, precise layer alignment, and smooth material flow prior to cutting. The line has been operated as part of a dedicated production setup together with a Bergman cross cutting saw (unit 114 A). This combination allows efficient pre-cutting of fabric rolls into required lengths before spreading, significantly improving workflow efficiency and reducing manual handling. Gedpfxoy Au Alo Akyebu The equipment has been used in a professional garment factory and was operational prior to factory shutdown. Key Technical Specifications • Total length: 14.65 meters (modular structure, adjustable configuration) • Table width: 1.80 meters (suitable for wide fabrics) • Technology: Air-flotation table system for low-friction material handling • Drive system: Motorized side drive units ensuring controlled spreading tension System Components • Finn-Convey motorized side drive units • Industrial air-flotation table structure with perforated surface • Integrated blower system with centrifugal fans under tables • Electrical control cabinet for system operation • Fabric roll handling stands and support assemblies • Integrated end cutting unit with circular blade system Cutting Unit Technical Details • AC speed-controlled motor (Taili Motor Co., Ltd., approx. 90–200W range)14650 • Gear reduction unit (e.g. 5GN-series) for high torque output • Circular cutting blade with integrated sharpening mechanism • Adjustable vertical guide rails for cutting height positioning • Designed for efficient cutting of multi-layer fabric stacks Auxiliary Drive Components • Auxiliary induction motor (e.g. 40W class, speed-controlled) for fine positioning and movement control • Gear-driven transmission for stable and continuous operation • External capacitor-based start system (typical for single-phase auxiliary motors) System Architecture • Modular table construction allowing flexible layout adjustments • Air-assisted material movement reducing friction and operator effort • Cradle-type roll handling enabling tension-free fabric feeding • Encoder-based or mechanical length control depending on configuration • Compatible with upstream roll cutting equipment and manual or semi-automatic workflows Production Advantages • High efficiency with long cutting layouts and reduced material waste • Excellent ergonomics, heavy fabric stacks can be moved with minimal force • Accurate layer alignment supported by controlled drive system • Integrated cutting capability improves workflow continuity • Suitable for a wide range of materials including denim, upholstery, and technical textiles Condition Used industrial condition Removed directly from production after factory shutdown Typical signs of use from industrial environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Location Valga, Estonia Removal & Transport Buyer responsible for dismantling, loading, and transport Professional dismantling strongly recommended due to system size and electrical installation

Condition: used, functionality: fully functional, machine/vehicle number: 82415, type of input current: three-phase, total width: 1,500 mm, total length: 2,500 mm, input voltage: 400 V, input current: 16 A, cutting height (max.): 100 mm, 114 A – BERGMAN & JOHANSSON 420 Bandknife Fabric Cutting Machine – Industrial Precision Cutting Unit Description For sale is a Bergman & Johansson industrial bandknife fabric cutting machine, model Type 420, manufactured in Sweden. This machine is designed for high-precision cutting of stacked textile materials using a continuous vertical bandknife system. It is a core component in professional garment cutting rooms, especially suited for detailed shaping of components such as collars, sleeves, and smaller pattern pieces. The system has been used as part of a dedicated cutting workflow together with Finn-Convey spreading tables (unit 22 C), enabling efficient transition from fabric spreading to precision cutting. The long-arm C-frame construction allows handling of large fabric stacks, while maintaining excellent control and cutting accuracy. The machine was in production use prior to factory shutdown and has been serviced on 27.02.2026. Technical Details • Manufacturer: Bergman & Johansson i Borås AB, Sweden • Model: Type 420 • Band length: approx. 4200 mm • Serial number: 82415 • Machine type: Industrial bandknife fabric cutting machine Motor Specifications • Manufacturer: Leroy-Somer • Type: LS 80 P • Power: 0.75 kW • Speed: approx. 1410 rpm • Voltage: 380–400 V (3-phase, star connection) • Current: approx. 2.0 A (Y) / 3.45 A (Δ) • Frequency: 50 Hz • Protection class: IP54 Machine Features • Continuous vertical bandknife for precision cutting • Long-arm (C-frame) design for large cutting areas • Integrated cutting table with smooth surface • Adjustable blade guard for safety and accuracy • Built-in sharpening system for continuous blade maintenance • Heavy-duty industrial construction • Mobile base with wheels for flexible positioning Cutting Capabilities • High-precision cutting of multi-layer fabric stacks • Suitable for both straight and complex contour cutting • Ideal for detailed garment components and templates • Clean and accurate cuts across various textile types System Characteristics • Table-based cutting process, material is guided manually • Optional air table functionality (depending on configuration) to reduce friction • Stable blade tracking and tension system for consistent performance • Designed for continuous industrial operation Condition Used industrial condition Serviced on 27.02.2026 Machine was operational prior to factory shutdown Typical wear consistent with industrial use Gbedpfx Aey Au Hqskyou Inspection possible prior to dismantling Sold as-is, where-is, without warranty Applications • Precision cutting of fabric stacks • Garment component cutting • Denim and workwear production • Textile cutting rooms • Small to mid-scale production setups Location Valga, Estonia Dismantling & Transport Buyer responsible for dismantling and transport Professional dismantling recommended

Year of construction: 2014, condition: used, This listing is for a Mueller PyroPure P4003 Pure Steam Condensing System. The unit is in full working condition and is ready for immediate release. This Unit was installed new in 2015 by Freestead Process Technology. This Unit is fitted with a Allen Bradley Compact Logix PLC and Panel View plus 1000 HMI's- Product Overview: The Mueller P4003 is a high-capacity pure steam condensing system, part of the trusted PyroPure series. Designed for pharmaceutical manufacturing, this system produces pyrogen-free and endotoxin-free water-for-injection (WFI) by condensing pure steam. Built to meet or exceed U.S. Pharmacopoeia (USP) standards for WFI, as well as CE marked and FDA compliant with 3.1B material certification. It is a versatile solution for facilities requiring both pure steam and WFI quality distillate. Its robust design and advanced features ensure reliable operation, compliance, and minimal maintenance. Key Specifications: Model Number: P4003 Capacity: 100 gallons per hour or 379 litres per hour of WFI-quality distillate. Pure Steam Inlet: 807 pounds per hour or 366 kilograms per hour. Coolant Requirement: 978 gallons per hour or 3702 litres per hour. Pure Steam Output Compliance: Pyrogen-free and endotoxin-free, meeting USP WFI standards. Core Features High-Quality Output: Produces pyrogen-free steam and WFI-quality distillate, ideal for pharmaceutical-grade applications. Utilizes a tangential nozzle design for optimal impurity separation in the pure steam generator. Efficient Design: Fully drainable components eliminate contamination risks and ensure clean operation. Electro-polished 316/316L stainless steel with a maximum surface roughness of 20 Ra for all product contact areas. USP Class VI-certified elastomers for enhanced safety and regulatory compliance. Ease of Maintenance: Removable tube bundle in the condenser allows for easy cleaning and inspection of critical surfaces. Requires only 24 inches of clearance on all sides for service and maintenance. Minimal instrumentation with just one control loop simplifies operation and reduces potential downtime. Installation Flexibility: Can be integrated with a PyroPure pure steam generator for dual production of pure steam and WFI. Godpfx Ajxv Agcskyobu Optional stand-alone design for remote installation at the point of use, adding versatility to your setup. Applications: Pharmaceutical Manufacturing: Sterile environments, autoclave processes, and critical cleaning procedures. Biotechnology: Providing WFI for sensitive biological processes. Healthcare: Humidification and sterilization in clean rooms or hospital sterilization units.

Condition: new, total length: 20,000 mm, total width: 2,990 mm, color: blue, Unladen weight: 30,420 kg Payload: 150,000 kg Gross Vehicle Weight (GVW): 180,420 kg Height of loading platform: 215 cm Extendable superstructure: Yes Gbjdpfx Ajuu Hhhjkyeu Overall condition: very good Technical condition: very good Visual condition: very good Price: Upon request

Condition: used, Bitzer LHV7E/4CE-9F3Y-40S Condensing Unit Bitzer Ecostar condensing unit, with integrated frequency inverter, duel speed controlled EC fans, cooling capacity approx 32Kw, 3Ph Gbedpezvlnpefx Akyeu