Used Classen+Co Cold Light Lamp for sale (44,865)

Condition: excellent (used), Year of construction: 2012, operating hours: 350 h, functionality: fully functional, machine/vehicle number: R-3176, overall weight: 5,500 kg, total width: 1,400 mm, total length: 7,000 mm, temperature: 200 °C, power: 6 kW (8.16 HP), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, For sale is a Binder DRYON DRVF 1400×7 fluidized bed/vibrating dryer for wood chips, compost, biomass, wood shavings, and comparable bulk materials. The system was used exclusively for testing purposes and has only approximately 300–400 operating hours. It is in good condition and fully functional. Key data: (The system has previously been used for steam drying with superheated steam at approximately 200 °C. Conversion to other drying media, such as air or flue gas, is possible in principle with appropriate modifications.) - Dryer width: approx. 1,400 mm - Overall length: approx. 7,000 mm - Input capacity: approx. 2,000 kg/h wet (designed for green waste) - Output capacity: approx. 1,200 kg/h dry (designed for green waste) - Water evaporation: approx. 667 kg/h (designed for green waste) - Output moisture content: ≤ 10% (designed for green waste) - Installed electrical power: approx. 6 kW - Weight: approx. 5,500 kg Upon request, additional components for a complete drying unit can be purchased. These include a filter system, a high-performance radial fan, and the associated drive motor. (see planning drawing) Filter system: NESTRO Lufttechnik GmbH, Type Jet 9525, year of manufacture 2013, factory number FA169096, filter area 282.6 m², max. compressed air 6.0 bar, category EK004182, weight approx. 8,000 kg. Gsdpfxjzg Dx Us Aa Eoud Fan / drive motor: High-performance radial fan Type HRV28-450 with drive motor VEM motors GmbH, Type IE2-W21R 315MX2, year of manufacture 02/2013, motor number 180022/0001 H, power 160 kW / 218 HP, voltage 400 V, current 274 A, speed 2,973 min⁻¹, frequency 50 Hz, protection class IP55, insulation class 155, weight approx. 955 kg.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, ICE TECH Xcel 6 Dry Ice Blaster – LIKE NEW, Year of Manufacture 2023 For sale is a like-new ICE TECH Xcel 6 dry ice blaster, year of manufacture 2023. Condition: The unit was purchased in 2023 but has never been put into operation. No signs of wear, no operating hours – in new condition. The original packaging is no longer available. Extensive accessory package included: Various additional nozzles for different applications Protective gloves Gusdpey S S Dfefx Aa Ejd Safety goggles Ready for immediate use – including personal protective equipment Highlights: Year of manufacture 2023 Unused / Like new Complete package with plenty of accessories Ideal for industrial cleaning applications (production, toolmaking, food industry, automotive, etc.)

Condition: excellent (used), Stations/Equipment: Unwinder Rewinder Extraction system incl. shredder (4x Lundberg Type WT200-200U - year 2018) Inert enclosure Busbar laminating unit Cutting units Laminating units / adhesive application units Gusdpoxzufhefx Aa Eod Heated rollers Master computer Control cabinets Drive motors Gantry crane Corona treatment

Year of construction: 2022, condition: used, functionality: fully functional, machine/vehicle number: 3352, RAMPF dispensing system with MS-S mixing system (static) Material used: Rampf RAKU PUR 21-2080-1, component A and component B The dispensing head has been extended with a Y-shaped slide. - Manual adjustment for the mixing system - RAMPF mixing system MS-S (static) - Pressure monitoring for component A + B - Material pressure tank 50 l for component A - Level monitoring for component A + B - Material recirculation to the dispensing pump for component A and B - Material evacuation for component A - Vacuum pump 25 m³/h - Waste container 60 l with pipe -> The collection trays have been replaced with mobile containers. - Trolley for waste or rinsing container - Container frame/machine frame, 3-part Godpfx Aozgck Nsa Eeud - Work table approx. 1,400 mm x 500 mm with table top - Transfer station for lid drum, component A - Transfer station for bung hole drum, component B - Dispensing control (Siemens PLC control based on S7-300) - Precision piston dispensing pump for component A and B - Positive displacement metering pump A, component, 257 ccm - Positive displacement metering pump B, component, 64 ccm --> 1 x spare positive displacement metering pump A and positive displacement metering pump B are included. These have been reconditioned by Rampf as an exchange unit. (see picture) Note: The potting system is located at our site in Austria.

Condition: like new (used), Year of construction: 2019, operating hours: 1,450 h, functionality: fully functional, Dry Ice Dosing & Bagging System. Automated Production & Bagging System. Automatic Dosing & Packaging System for Dry Ice Pellets New price currently around €250,000 Description: Complete system for dosing and packaging dry ice pellets. Fully automated process with high capacity and reliability. Advantages: Additional information about the bagging machine. System Dimensions: The entire system measures 6 meters in length, 3.20 meters in height, and approximately 1.20 meters in width. The round turntable (disc) has a diameter of 1.5 meters. The system does not need to be installed in a completely straight alignment. The system can be rotated 90 degrees in two sections, creating a U-shape. This allows the machine to be installed in more compact spaces without compromising functionality. The height of the system is fixed. Machine Output: Output capacity is approximately 500 kg per hour. Bag Dimensions and Weight: Guedpew Ttxfefx Aa Esd The bag sizes can be fully customized to your requirements. Options range from small bags of approximately 5 grams to larger bags of 20 kg or even 40 kg. Adjustments can be made flexibly to suit your production demands. Buffer Tank: The buffer tank has a capacity of 20 kg. Maintenance Costs: Average annual maintenance costs, excluding materials and call-out charges, are between €1,200 and €1,500 per year. Worldwide Shipping. Cold Jet Prime 600, Cold Jet Prime600, Cold Jet dry ice dosing & bagging system, dry ice dosing machine for sale, dry ice bagging machine for sale, dry ice production machine, dry ice production machine for sale, dry ice dosing & packaging system, automatic dry ice dosing machine, automatic dry ice bagging system, dry ice pellet production & packaging, dry ice packaging equipment, industrial dry ice production system, dry ice pellet production machine, dry ice pellet making equipment, dry ice pellet packing machine, pelletizer & bagging system, dry ice pelletizer bagger, cryogenic dry ice production equipment, CO2 dry ice production machine, dry ice manufacturing system, dry ice production & dosing system, used dry ice dosing machine, second-hand dry ice production machine, refurbished dry ice machine, dry ice supply system, high-capacity dry ice production system, automatic CO2 pellet bagger, liquid CO2 to dry ice converter, dry ice bag filling machine, dry ice packaging automation system, industrial packaging machine for dry ice, high output dry ice system, adjustable bag size dry ice, dry ice buffer tank system, 500 kg/h dry ice production, worldwide export dry ice machinery, industrial dry ice packaging, cold chain dry ice packaging equipment, food-grade dry ice packaging machine, logistics dry ice dosing & bagging, dry ice dosing & shipping solution, dry ice dosing system Netherlands, dry ice dosing system Noordwijkerhout, DrDryice, dry ice production equipment Europe, cryogenic pellet production systems, dry ice manufacturing equipment for sale, dry ice production line, dry ice pelletizer PR series, integrated dry ice dosing systems, industrial CO2 pellet production, dry ice automation system, dry ice bagging & dosing automation, high reliability dry ice machine. DrDryice

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 2138, input voltage: 380 V, type of input current: three-phase, ÖZM 1100 BLSD BOTTOM SEALING BAG MAKING MACHINE Machine length: 6600 mm Machine width: 1900 mm Machine height: 1750 mm Year of manufacture: 2024 Capacity: 150 pieces/min Gsdpfezd S A Ajx Aa Eoud Bag length: 100 - 2000 mm Bag width: max. 1100 mm Film thickness: 0.007 - 0.200 mm Servo motor (pulling roller motor): 5 kW Main motor (jaw motor): 1.5 kW Unwinder motor: 0.75 kW Bobbin unwinder motor: 1.5 kW Hydraulic bobbin lifting motor: 0.37 kW Edge control motor: 0.25 kW Conveyor motor: 0.25 kW Upper jaw heating element: 3 kW Lower jaw heating element: 2.5 kW Cutting heating element: 1.1 kW Current type: 3 - 50 Hz Operating voltage: 380 V Air pressure: 6 bar Total power: 19 kW

Condition: excellent (used), operating hours: 186 h, overall weight: 110 kg, warranty duration: 12 months, I sell used and new machines for dry ice cleaning. The offered unit is used and comes with a 1-year warranty. The machine has only 186 operating hours. The set includes one nozzle of your choice. Also included are a hose for dry ice blasting and an applicator. There is a hose for compressed air supply. Hose holders and transport straps are included. Gjdpfx Ajy Hf Hvja Eoud

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total height: 2,470 mm, total width: 5,000 mm, total length: 10,000 mm, type of input current: three-phase, temperature: -4 °C, 2x RIVACOLD BEST W R290 cooling units on the left side Gsdpeyiakwefx Aa Eoud PRICE REDUCED BECAUSE WE NEED THE SPACE.

Year of construction: 2020, condition: excellent (used), functionality: fully functional, 1 x Ethercat servo-driven horizontal flighted conveyor. This conveyor has an advanced servo system with a matched drive and motor which only works off Ethercat plc systems. Perfect for accurate 'start / stop' work. Manufacturer - Jinan Hiwell Machinery Co. Ltd. Model - LPJ600-4. Serial number - 1661962. Date of manufacture - 2020. Belt dimensions - 3900mm L x 600mm W. Electrical requirements - 220 V / 50 hz / 1 phase. Gusdpfx Ajzdvb Nea Esd

Condition: repair required (used), Year of construction: 2008, functionality: not functional, machine/vehicle number: 6034, travel distance X-axis: 7,200 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 590 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, nominal power (apparent): 45 kVA, controller manufacturer: HEIDENHAIN, controller model: Bahnsteuerung iTNC 530, total height: 2,900 mm, total length: 12,500 mm, total width: 4,810 mm, overall weight: 14,000 kg, spindle speed (min.): 100 rpm, spindle speed (max.): 12,000 rpm, operating pressure: 7 bar, The BZ 7000 is designed exclusively for milling, drilling, countersinking, reaming, and thread cutting of metals, aluminum, plastics, and wood (chipboard and solid wood). URBAN CNC Machining Center BZ 7000 • Year of manufacture: 04/2008 • Control: HEIDENHAIN path control iTNC 530 • 4 axes • Travel paths X / Y / Z axis: 7200 / 450 / 590 mm • Working area X / Y / Z axis: 7000 / 400 / 350 mm • Weight: 14 t Equipment: - Robust base frame in welded steel construction - Ball rail guides on all axes - Milling spindle unit: 100 - 12,000 rpm, tool mounting SK 40 Drives: - X-axis (50 m/min) via rack and pinion drive - Y/Z-axis (25 m/min) via ball screw drive - B-axis: 9000°/min - Swiveling control panel - Automatic central lubrication - Traveling tool changer for 12 SK 40 tool holders Guodeyzxfnspfx Aa Eed - Coolant emulsion system - Machine lamp - Safety fence - Electronic handwheel integrated into the control panel - Chip drawers - Laser scanner - Minimum quantity lubrication system Technical Data: - Compressed air connection: R 3/8" / 6 bar - Device connection: R 1/4" - Operating pressure: approx. 6 bar - Air consumption per cycle: approx. 600 l/min at 6 bar - Electrical connection: 3 x 400 V +/- 5% / 50 - 60 Hz - Control voltage: 24 V DC - Rapid traverse X-Y-Z: 50 – 25 – 25 m/min - Infinitely variable feed: 0 - 5000 mm/min - Tool changer: disc-type changer with 12 SK 40 stations - Tool holder: SK 40 - Tool clamping: hydraulic - Coolant device: emulsion, 300 l - Spindle speed: 100 - 12,000 rpm - Speed adjustment: 80 – 120% - Drilling capacity in St 60 / aluminum: up to 28 mm Ø - Thread cutting capacity in St 60 / aluminum: up to M24 - Measurement system: rotary encoder/linear measurement system - Positioning accuracy: 0.025 mm - Repeat accuracy: 0.015 mm - Control: HEIDENHAIN iTNC 530 M, 4 controlled axes - Data interface: V 24/RS - 232 - C - Travel range X / Y / Z axis: 7200 / 450 / 590 mm - Working area X / Y / Z axis: 7000 / 400 / 350 mm - Space requirement including safety fence: approx. 60 m² (12.5 x 4.8 m) - Machine weight with accessories: approx. 14 tons - Sound emission: average sound pressure level 79 dB (A)

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, power: 9.7 kW (13.19 HP), Technical data cardboard shredder: Manufacturer Presto GmbH & Co. KG Type PZA Year of construction 2007 Throughput volume 130 m³/hour Speed 37/9 rpm Motor power 7,5 / 2,2 kW Electrical connection 32 A Dimensions shredder inside 1,490 x 1,320 x 530 mm (L x W x H) Dimensions shredder outside without cover 2,308 x 1,320 x 685 mm (l x w x h) Machine weight 0,45 tons Use of the systems: The PZA cardboard shredder was in use in a Dutch logistics centre to pre-shred loose, erected cardboard boxes from the returns department and then press them into bales. The cartons were fed manually onto the infeed conveyor and transported directly to the cardboard shredder by a sliding belt conveyor and shredded. The pre-shredded cardboard boxes were then transported over hundreds of metres to the baler where they were pressed. Gedpfx Aaeu Tha Ij Esud Scope of delivery: 1 piece Presto cardboard shredder (2-shaft shredder) type PZA Comments: The cardboard shredder was an elementary part of the disposal line and therefore good maintained to ensure high availability of the returns department. The machine is in good condition and ready for immediate use. The price is per piece exw. our warehouse in Siddeburen, the Netherlands. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2010, operating hours: 3,641 h, functionality: fully functional, pressing force: 36 t, filling opening width: 1,100 mm, filling opening length: 1,080 mm, bale width: 1,100 mm, bale height: 750 mm, power: 15 kW (20.39 HP), volume flow: 90 m³/h, Technical data baler: Manufacturer Presto GmbH & Co. KG Typ CC 36 M Year of construction 2010 Hours of operation 3,641 h Press power main press 36 t Specific press capacity 467 N/cm² Feed channel 1.080 x 1100 mm (l x w) Cycle time 34 sec. Capacity per cycle time 0,85 m³ Theoretic throughput rate 90 m³/h Throughput rate under operating conditions with a material bulk density of 35 kg/m³ approx. 51 m³/hour Guodpfx Aeu Thh Esa Esd Bale size 1100 x 750 mm (w x h), length variable Driving motor 15 kW Tying 4-fold vertical, semi-automatic, with polyester synthetic yarn Throughput rate at a bulk weight of 35 kg/cbm 1,8 to/h bulk weight of 60 kg/cbm 2,5 to/h bulk weight of 100 kg/cbm 3,1 to/h Transport dimensions only baler 4.200 x 1.640 x 2.200 mm Machine weight baler approx. 4 to Comments: The press was checked for function in our workshop, then stored and is therefore available at short notice. The machine documentation (operating instructions, CE, electrical and hydraulic circuit diagram) is available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, Year of construction: 2026, machine/vehicle number: K09002KEP142020260601, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, stroke length: 200 mm, operating speed: 40 mm/s, reverse speed: 200 mm/s, table width: 500 mm, table length: 1,200 mm, table height: 1,150 mm, throat depth: 330 mm, ram plate length: 1,200 mm, clearance between the columns: 970 mm, retraction force: 40 t, total length: 1,340 mm, total width: 1,310 mm, total height: 2,170 mm, overall weight: 2,800 kg, control type: CNC control, degree of automation: automatic, actuation type: electric, Equipment: CE marking, safety light barrier, 1. Basic Information - Manufacturer: Jinan KaFe CNC; Model: KF-4012, self-developed proprietary design - Edge over hydraulic brakes: 80% energy saving, oil-free & eco-friendly, higher speed, precision & consistency - Applications: Cabinet, elevator, kitchen, solar, auto parts, home appliances & other sheet metal industries Gedpfx Aajza Rm Tj Eeud 2. Mechanical Structure 1. Frame: Full steel welded, FEA optimized, 5-face one-time machining for rigidity & long-term accuracy 2. Power Box: Heavy-duty ball screw + imported sealed bearings for stable bending load 3. Auto Compensation Worktable: Built-in deflection strips, dial fine-tune, standard reduction motor & scale 4. 4-axis Back Gauge: AC servo driven, auto collision avoidance during bending 5. Bending Dies: Quenched & ground, high tolerance accuracy, less secondary finishing, longer service life 6. Electrical Cabinet: Closed convection cooling, neat wiring, cantilever operation box; self-diagnosis, emergency stop & text fault alarm 7. Touch Screen: 5-wire type, over 10 million service cycles 3. CNC System (Taiwan SYNTEC) - 15-inch industrial touch screen, EMC & temperature tested industrial motherboard - Direct programming for simple bending tasks - Core intelligent functions: ±5μm repeated positioning (full closed-loop by grating/magnetic scale); auto back gauge calculation; mold library; one-time trial bend angle compensation; auto bending pressure calculation & overload alarm; continuous arc bending; password protection - System pages: Machining, Manual, Mold, Program, Compensation, Alarm, I/O Signals ## 4. Core Technical Parameters - Bending force: 400KN; Table length: 1250mm; C-type frame - Ram stroke:200mm; Max opening:500mm; Throat depth:330mm - Speed: Rapid/Return 200mm/s, Working 40mm/s - 6 controlled axes: Y1/Y2/X/R/Z1/Z2; Dual 11KW Y-axis servo, peak feed power 15KW - Overall size:1340×1310×2170mm; Weight:2.8T 5. Standard Core Component Brands - Control & servo: Taiwan SYNTEC - Switches: OMRON (JP); Grating scale: GIVI (IT); Electric parts: Schneider (DE) - Bearings: INA (DE); Linear guide: Fulei (DE); Timing parts: Shanghai Fulong - Y-axis screw & guide: Nanjing brand - Note: Equal-grade brands replaceable if original stock unavailable 6. General Advantages - Mechanical: High rigidity, full closed-loop precision, auto deflection compensation, anti-collision back gauge, durable dies - Control: Intelligent process compensation, multi-safety protection, real-time fault diagnosis - Operation: Energy-saving, zero hydraulic oil cost, fewer secondary processes, high mass production efficiency

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: K03903KT601220260601, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Cycut, controller model: 6000, laser type: fiber laser, laser source manufacturer: Maxphotonics, laser source model: MFSC-3000, laser hours: 80,000 h, laser power: 3,000 W, laser wavelength: 1,080 nm, pipe diameter (max.): 110 mm, pipe length (max.): 6,500 mm, table length: 7,000 mm, table width: 1,200 mm, table height: 1,800 mm, workpiece weight (max.): 80 kg, power: 3,000 kW (4,078.86 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, warranty duration: 12 months, 1.This is Model 6012 Two-Chuck Fiber Laser Tube Cutting Machine, equipped with MAXPHOTONICS MFSC-3000 3000W fiber laser source and BOCHU CypCut/HypCut professional tube cutting control system. 2.It adopts heavy-duty integrated welded bed with aging stress relief treatment, dual pneumatic self-centering front & rear chucks for stable clamping, short tail cutting design to improve material utilization. 3.The fully enclosed cutting cabin with integrated dust removal system realizes low smoke, low noise and laser radiation protection, meeting industrial safety and environmental standards. Guedpfeza Rm Hox Aa Esd 4.Full closed-loop servo drive system ensures positioning accuracy ±0.04mm/m and repeat positioning accuracy ±0.03mm/m, maximum idle moving speed up to 120m/min, matched with water cooling chiller for stable laser output. 5.The machine supports cutting carbon steel, stainless steel, aluminum alloy, brass and copper tubes, compatible with round tube, square tube, rectangular tube, oval tube, angle steel and channel steel. 6.It can complete hole drilling, bevel cutting, intersecting line cutting and blanking in one process, ideal mass production equipment for metal pipe processing factories. Item Parameter Machine Model 6012 Two-Chuck Fiber Laser Tube Cutting Machine Laser Source Brand MAXPHOTONICS Laser Source Model MFSC-3000 Laser Power 3000W Wavelength 1080nm (±10nm) Control System BOCHU CypCut / HypCut (Tube Special Version) Structure Horizontal Heavy Bed, Dual Pneumatic Chucks Processing Tube Length Max 3000mm Clamping Range Round tube Φ10–Φ120mm; Square tube 10×10–80×80mm Positioning Accuracy ±0.04mm/m Repeat Positioning Accuracy ±0.03mm/m Max Idle Speed 120m/min Cooling Mode Industrial Water Cooling Processable Materials Carbon Steel, Stainless Steel, Aluminum Alloy, Brass, Copper Supported Profiles Round tube, square tube, rectangular tube, oval tube, angle steel, channel steel

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: K03903KLC301520260601, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Shanghai BOCHU Electronic Technology Corporation Limited, controller model: CypCut, laser type: fiber laser, laser source manufacturer: Maxphotonics, laser source model: MFSC-1500、3000、6000、12000, laser hours: 80,000 h, laser power: 6,000 W, laser wavelength: 1,080 nm, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 16 mm, sheet thickness brass (max.): 12 mm, sheet thickness copper (max.): 10 mm, table length: 5,100 mm, table width: 2,400 mm, table height: 2,300 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 25 mm, travel distance X-axis: 3,020 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 95 mm, cutting speed: 110 mm/min, positioning speed: 140 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.02 mm, workpiece weight (max.): 1,000 kg, power: 3,000 kW (4,078.86 HP), input voltage: 380 V, input frequency: 50 Hz, type of cooling: water, overall weight: 4,500 kg, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, safety light barrier, 1.This is a fully enclosed single-platform fiber laser cutting machine equipped with 6000W MAXPHOTONICS original fiber laser source and BOCHU control system. 2.Adopting integral welded bed with aging stress relief treatment, the machine features high rigidity and long-term stability. 3.The full-enclosed protective structure realizes smoke removal, noise reduction and laser radiation protection, meeting environmental protection and safety standards. 4.With high-precision servo drive system and intelligent height tracking cutting head, the machine ensures accurate positioning and smooth cutting section. 5. It is widely used for cutting carbon steel, stainless steel, aluminum alloy, brass and copper plates, featuring low failure rate, easy maintenance, high efficiency and stable mass production performance. It is an ideal equipment for sheet metal precision processing. 6.Laser Source Brand: MAXPHOTONICS 7.Laser Source Model: MFSC-6000 Gsdpfxoza Rmyo Aa Esud 8.Laser Power: 6000W 9.Wavelength: 1080nm (±10nm) 10.Control System: BOCHU CypCut/HypCut 11.Structure: Fully Enclosed Single Platform 12Positioning Accuracy: ±0.03mm/m 13.Repeat Positioning Accuracy: ±0.02mm/m 14.Max Idle Speed: 120m/min 15.Cooling Mode: Water Cooling 16.Processing Materials: Carbon Steel, Stainless Steel, Aluminum Alloy, Brass, Copper

Condition: good (used), Year of construction: 2019, Mössner Rekord SSF 801 Band Sawing Machine The most powerful Mössner band saw—deployed when peak performance is required. The ultimate flagship among vertical high-performance band sawing machines. Godpfxozc Uvwo Aa Ejud This machine stands for maximum precision, exceptionally smooth operation, and uncompromising durability in continuous industrial use. Standard Band Saw Equipment Band saw stand with robust grey cast iron construction Cutting speeds adjustable via frequency converter and three-phase motor with potentiometer; 2-speed gearbox OR infinitely variable cutting speeds with flange bearing and frequency converter Manual blade tensioning device with hydraulic indicator Tiltable work table – 30° to the right, 15° to the left Replaceable aluminum band wheels with hard rubber facing Adjustable upper band wheel Safety door switches on the band wheel doors Finish: RAL 7035 Light Grey; doors RAL 5005 Signal Blue Technical Data: Manufacturer: Mössner (August Mössner GmbH + Co. KG) Model: Rekord SSF 801 Band wheel diameter: 800 mm Max. cutting width (throat depth): 785 mm Max. cutting height: 670 mm (optionally extendable to 800 mm) Table size: 960 × 1000 mm Max. table load: 750 kg Motor power: 11 kW Cutting speed (gearbox): 26 – 180 m/min and 290 – 2000 m/min Cutting speed (flange bearing): 500 – 2000 m/min Machine weight: approx. 2,300 kg Dimensions (L x W x H): 2240 x 1080 x 2900 mm Year of manufacture: 2019 New price: €54,000 "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), functionality: unexamined, operating hours: 8 h, power: 40 kW (54.38 HP), input voltage: 380 V, input frequency: 50 Hz, Tunnel microwave dryer with conveyor belt for continuous drying. Adjustable microwave power and belt speed, PLC control with separate control cabinet. Stainless steel construction and food-grade PTFE belt. Machine available in Switzerland (Martigny). Water-cooling circuit included. Ventilation system to extract water vapor from the chamber is not included. Technical specifications: General data • Model: HM-40KW-A • Quantity: 1 set • Frequency: 2450 ± 50 MHz • Microwave feed: top feed • Heating chambers: 4 Power / electricity • Microwave power: 40 kW (adjustable) • Rated input power: 50 kW • Power supply: 380 V, three-phase, 50 Hz Conveyor / belt • Belt width: 600 mm • Belt speed: 0.5 – 7 m/min • Conveyor motor: 0.75 kW, frequency inverter • Belt: Food-grade PTFE (high temperature, fire-resistant, anti-corrosion) • Conveyor height: 900 – 1500 mm • Leak-proof opening (microwave suppressor): H 50 mm; L 600 mm Cooling • Magnetron cooling: by water, circuit included Dimensions / construction • Machine dimensions (L × W × H): 5500 × 1000 × 2000 mm • Microwave active area: 4000 × 600 × 1750 mm Gedpezc Hvpsfx Aa Eeud • Construction: SS304, 1.5 mm thick • Observation windows Control / safety • Control: PLC control screen + separate cabinet • Temperature measurement: Non-contact IR (range indicated 0–350°C, up to 0–500°C) • Safety: Automatic shutdown upon door opening • Microwave leakage standard: GB 5959.6-2008 Conditions • Availability: Immediate • Location: Martigny, Switzerland (currently in the factory) • Condition: To be tested • Inspection: Upon request Transportation costs are the responsibility of the buyer.

Condition: ready for operation (used), Four-column press SP60/670 - Achtermann & Co. Stuttgart - Pressing force: 60 tons - Distance between columns: 670 mm - Distance between columns / laterally: 400 mm Gedpfx Aezcxhwea Eeud - Table size: 900 x 750 mm - Vertical clearance: 520 mm - 6 x T-slots in the upper platen - 6 x T-slots in the table Dimensions: L x W x H 2 x 1.5 x 2 meters / Weight 3000 kg Subject to errors and omissions.

Year of construction: 2019, condition: defective spare-parts repository (used), functionality: not functional, Important note regarding the item's condition: Please read carefully before purchasing: This item comes from a business closure or warehouse liquidation. We were unable to test the device for functionality, and therefore it is explicitly sold as UNTESTED, DEFECTIVE, and NON-FUNCTIONAL. It is intended solely for hobbyists, technicians for repair purposes, or as a source of spare parts. The sale is made with the exclusion of any warranty regarding functionality or completeness. Product description: Offered is an industrial climate testing chamber / temperature and humidity testing chamber from the manufacturer SHENGS (Shanghai Shengs Electronic Technology Co., Ltd.). Devices of this type are generally used for material tests, aging simulations, or electronic component tests under defined temperature and humidity conditions. Features & visual characteristics (according to the images): • Interior: High-quality stainless steel interior, easy to clean. Includes a solid, perforated insert (grid). • Connections & access: Side cable entry (port) with a plug for passing through sensors or power cables for the test item. • Technical area: Easily accessible technical compartment on the side (electronics, contactors, relays, fan motors, and a stainless steel water tank for the humidification unit are installed). • Mobility: The heavy device is mounted on four stable swivel casters and can therefore be easily positioned at the place of use. • Other: Manometer on the outside, drain/supply hose in the lower area. Technical data (according to the nameplate): • Manufacturer: Shanghai Shengs Electronic Technology Co., Ltd. • Model: STH-2P-C (handwritten) • Year of manufacture / Date: 14.08.2019 • Serial number: SS-SC19011 • Power supply: 1 phase, 220V AC • Current consumption: 30A Visual condition: The device shows signs of wear and tear due to age and use (scratches, slight dirt, discoloration). A side panel for the technical area seems to be missing or was removed for the photos (please check the pictures carefully). The seals on the interior appear to be intact. All internal components shown in the pictures (circuit boards, cables, water tank) are included in the scope of delivery, but no guarantee is given regarding their functionality or completeness. Scope of delivery: • 1x SHENGS STH-2P-C climate testing chamber (as shown in the photos) • 1x Grid (already installed in the interior) • No other accessories, no manuals, or test reports are included. Shipping and pickup information: Due to its size and weight, regular parcel shipping is not possible. Godpezcxbwefx Aa Ejud • Pickup: Pickup by the buyer is preferred (Please bring a suitable transport vehicle and possibly helpers/pallet truck). • Shipping via freight forwarder: Can be arranged on request and at the buyer's expense (buyer arranges shipping or freight costs are charged separately).

Year of construction: 2021, condition: new, Aluminum flat belt conveyor without substructure Belt length: 4000 mm Drive roller: knurled Deflection roller: crowned Our core competence lies in providing customers with exactly what they need. We work together with our customers to develop customized, individual solutions and deliver the corresponding equipment, manufactured in-house. Please do not hesitate to contact us by phone to find a suitable solution for your application. Godpohfwcbefx Aa Ejud PVC conveyor belt Conveyor belt EM 15/2 0+17 PVC white, FDA compliant according to EU10/2011 Belt width 500 mm outer Wave edge welded on both sides, 40 mm high T-30 cleat, 400 mm pitch * antistatic due to threads in the fabric of the running side Endlessly welded with a stepped finger joint Food-grade certificate included V2A stainless steel backing plate, full-surface Drive: Motor approx. 1.1 kW * optionally controllable with a frequency inverter Connection 220/400 V

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Shenzhen ICM Technology Development Co., Ltd., controller model: 880W02, pipe diameter (max.): 38 mm, pipe length (max.): 3 mm, tube wall thickness (max.): 2 mm, bending angle (max.): 190 °, bending radius (max.): 200 mm, bending radius (min.): 2 mm, mandrel length: 150 mm, number of axes: 2, table length: 3 mm, overall weight: 1,300 kg, total length: 3,900 mm, total width: 900 mm, total height: 1,400 mm, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, oil tank capacity: 80 l, number of digital displays: 1, warranty duration: 36 months, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, quick-change device, Full Automatic Pipe Bending Machine DW38CNC-2A-1S Gedpfsy Uuw Tsx Aa Esud Equipped with a touchscreen and CNC control system; capable of storing up to 500 sets of parameter groups. Features a rebound compensation setting program, with built-in confidentiality protection for programs and processing data. Servo control is adopted for corner bending, pipe bending and material feeding functions. The operating system is protected by passwords and physical keys, and supports production quantity & runtime records for efficient production management. Comes with slow bending and slow core pulling functions. Fault messages are displayed on the screen to help operators troubleshoot problems promptly. Touchscreen This pipe bender is equipped with a Weinview industrial touchscreen for its operation interface, which delivers an intuitive operation experience and allows new operators to get started quickly. You can directly edit the pipe bending process parameters on the interface, such as feeding distance, rotation angle and bending angle, and separately set the running speed for each step. During operation, the interface displays real-time axis positions, bending progress and production cycle, and automatically counts total output and shift output to help you manage production efficiency effectively. It also supports manual single-step debugging, automatic continuous operation, program editing and equipment parameter setting. Different modes can be switched with one click, making it convenient for machine trial runs and mass production alike. Hydraulic solenoid valve manifold This integrated hydraulic solenoid valve manifold serves as the control center of the CNC pipe bender's hydraulic system. Adopting industrial-grade modular design, it integrates multiple solenoid valves to independently control the movements of the feeding axis, rotating axis, bending axis, as well as clamping, auxiliary pushing and other auxiliary mechanisms. Linked with the CNC system, it converts control commands into precise hydraulic power output, enabling smooth operation throughout pipe feeding, rotation and forming. Matched with high-pressure sealed hydraulic hoses, it maintains zero leakage and high stability under full-load operating conditions, delivering reliable performance for long-term mass production. Servo drive These four units are Mitsubishi servo drives equipped on our pipe bender, acting as the power core that governs key movements including material feeding, pipe rotation and pipe bending. Adopting Mitsubishi MR-JE series industrial-grade high-end servo drives, they feature high positioning accuracy and fast response. Both feeding distance and rotating angle can be controlled precisely with no deviation. With excellent stability, they rarely lose steps or malfunction during long-hour continuous operation. This ensures consistent bending precision for every pipe and a high finished product yield.

Condition: good (used), Kistler NC joining module with dual-station/spindle unit Kistler NCFH 60 servo press with feed slide & spindle station Gujdszcpnzepfx Aa Ejd The Kistler NCFH 60 NC joining module is integrated into an industrial dual-station/spindle unit designed for automated series production (e.g., friction welding or precision pressing). The system is characterized by exceptional precision, integrated force-displacement monitoring (piezoelectric sensor technology), and an extremely robust design capable of withstanding continuous industrial loads. Precise press-fitting and joining: Ideal for high-precision assembly processes in the automotive industry, electronics manufacturing, or general mechanical engineering. Integrated quality assurance (force-displacement monitoring): Using built-in piezoelectric sensors, the module measures the exact tensile and compressive forces acting during the pressing process in relation to position. Flexible process control: Enables advanced functions such as "joining to block," position-controlled pressing, or force-controlled joining (when combined with a suitable controller, e.g., Kistler maXYmos). Automated workpiece holding: The coupled spindle station features an automated clamping function (pneumatically or hydraulically actuated via integrated cylinders), making it perfect for automated series production and assembly lines. Sturdy machine bed: The entire mechanical assembly is mounted on a heavy-duty welded steel frame to withstand the immense forces (up to 6 tons per side) generated during operation. Joining module manufacturer: Dr. Staiger Mohilo+Co GmbH / Kistler Group Type: 2151B 60304002 Model: NCFH 60 400 300 B H C G Nominal force: 60 kN (equivalent to a pressing force of approx. 6 tonnes) Max. total spindle stroke: 400 mm Max. travel speed: 300 mm/s Motor type: AC hollow-shaft servo motor (165H-180E) Holding brake: 18 Nm Certification: CE marking Scope of delivery: Kistler NCFH 60 joining module including mounted flange coupling, yellow slide/feed guide, complete sensor cabling, and the associated spindle clamping station. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs on request!

Condition: new, functionality: fully functional, Year of construction: 2026, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Nanjing Estun, controller model: E21S, working width: 3,200 mm, cutting angle (min.): 0.5 °, stroke rate (min.): 15 1/min, stroke rate (max.): 15 1/min, sheet thickness (max.): 8 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 4 mm, table height: 850 mm, back gauge adjustment: motor-driven, back gauge: 600 mm, back gauge speed R-axis: 40 mm/s, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, control voltage: 400 V, oil tank capacity: 220 l, overall weight: 7,000 kg, total length: 3,950 mm, total width: 1,700 mm, total height: 2,150 mm, number of support arms: 3, warranty duration: 24 months, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, QC11K-8/3200 Guillotine shearing machine The frame adopts an all-steel welded structure, boasting sufficient strength and rigidity. Internal stresses are eliminated through normalizing and high-frequency vibration treatment to ensure the overall precision of the machine body. German large-scale floor-type boring and milling machines are employed for precision machining using a one-time processing method, guaranteeing exceptional machining accuracy. It features a hydraulic swing-type structure with an upper tool rest return device powered by nitrogen cylinders, enabling fast return speeds. The hydraulic system utilizes an integrated logic circuit controlled by sequence valves, ensuring stable operation, low noise, and straightforward maintenance. Tool rest movement is regulated by hydraulic valves for precise control. The material pressing device incorporates an integrated circuit and independent parallel clamping cylinders. When dealing with uneven sheet metal, the cylinders can expand and contract freely to securely clamp the material. The clamping force is adjustable according to the sheet material and thickness, preventing any damage to the sheet surface. Motorized adjustment allows for quick setting of the blade gap, offering simple operation to adapt to shearing requirements of different sheet thicknesses and materials. Control is achieved through a numerical control (NC) system, enabling fixed-stroke shearing operations. An optical line alignment device facilitates scribed line shearing for enhanced accuracy. The electrical control system is centralized and reliable, with the following key features: All power facilities are installed within the machine body, operated and controlled via buttons on the control panel. Gujdpey Uquhofx Aa Eed A foot switch is provided for direct and convenient operation of the shearing action. Core electrical components are sourced from Schneider for guaranteed quality and reliability. Circuit breakers are installed to protect the control circuit against short circuits. Motor thermal-magnetic circuit breakers provide protection against motor overload and short circuits. The hydraulic system is designed for safety and reliability: The hydraulic system manifold block is equipped with a direct-acting safety relief valve to ensure accurate pressure adjustment. A pipeline check valve is specially installed at the pump head to protect the oil pump from hydraulic shock. Both upper and lower blades are made of high-quality materials and undergo full heat treatment, ensuring sufficient hardness and a long service life. The ball-rolling worktable and front material supporting device facilitate easy feeding while preventing scratches on workpieces during operation. The CNC back gauge device is equipped with high-performance servo motors, drives, precision ball screws, and linear guides, achieving a positioning accuracy of ≤±0.1mm. For the CNC electrical system:The back gauge is controlled by the E21S simple CNC system. Users can directly input the desired values, and the back gauge automatically moves to the specified position upon confirmation. Transmission is achieved through a motor-driven precision lead screw and nut assembly, with digital display via a counter. Fine-tuning for free size correction is not configured to ensure shearing precision, with an error of ≤0.2mm per meter. Three front support arms are fixed on the worktable, providing convenient placement for shearing materials.

Condition: like new (used), Year of construction: 2007, operating hours: 151 h, functionality: fully functional, warranty duration: 12 months, Coldjet Aero30 Machine – Like New This machine is suitable for industrial cleaning, both for smaller tasks and large-scale projects. The main advantage of this unit is the absence of the latest generation of electronics, which makes it highly reliable and robust. It is considered one of the most aggressive machines in its class. This particular unit is in excellent condition. Guodpfx Aaewg R Rme Ejd Cold Jet Aero 30 Dry Ice Blasting Machine (151 Operating Hours) Complete with the following accessories: - 1 x 20’ Blasting Hose - 1 x Cold Jet Applicator - 2 x Nozzles (NEW) This is one of the best dry ice blasting machines available worldwide. With no complex electronics, it is renowned for its reliability and low maintenance costs. For inquiries or to schedule a viewing, please contact us at Dr.Dryice. All machines are sold with a 1-year warranty. We offer repairs and maintenance for Cold Jet machines, as well as supply new models. Contact us for more information. Worldwide shipping available. [Keywords for search: Cold Jet dry ice machine for sale, dry ice blasting machine, industrial dry ice blaster, used Cold Jet, second-hand dry ice blasting machine, cryogenic cleaning equipment, CO2 cleaning machine, mat cleaning without disassembly, fire and soot cleaning, food industry cleaning equipment, automotive dry ice cleaner, printing press cleaning, high pressure dry ice blaster, non-abrasive cleaning system, refurbished dry ice blasting machine, Venturi nozzle, 20 ft hose, compatible with Cold Jet, Kärcher, ASCO Jet, Cryoblaster, Cryonomic, and more. Export available.]

Condition: like new (used), Year of construction: 2018, operating hours: 47 h, functionality: fully functional, i3 Microclean UPGRADE DX PELLET SANDERS (€2000) This machine allows you to use loose 3mm pellets as well! And of course, blocks. As good as new, 1-year warranty Includes hoses and nozzle. The COLD JET machine is suitable for industrial cleaning, for both small and very large projects. The benefit of this machine is that it isn’t equipped with new-generation electronics. It’s one of the most aggressive cleaning machines on the market. The unit is in excellent condition. Cold Jet i3 Microclean & Dry Ice Press. Complete blasting set including the following equipment: COLD JET i3 Microclean (47 hours of use) 1 x 20' blast hose 1 x Cold Jet applicator 1 x nozzle Godpfeydpy Tox Aa Eoud One of the best machines in the world. No electronics. That’s why it’s reliable. Very low maintenance costs. For questions or to schedule a viewing, please contact DrDryice. All machines are supplied with a 1-year warranty. Repairs and maintenance services available for Cold Jet equipment. We also supply new Cold Jet machines. Please contact us. Worldwide shipping possible. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blaster, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blaster, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Ice Press, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, tool and die cleaning without disassembly, dry ice paint removal, dry ice coating removal, rust removal, fire and soot damage remediation, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blaster Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice