Used Cable Drum Shelf for sale (7,721)

Condition: good (used), ESPEC Climate Test Chamber PL-3KPH Manufacturer: ESPEC Corp. Iodpjy N Awqofx Abnotk Type: PL-3KPH Design: Air-cooled temperature and climate test chamber For sale is a used ESPEC climate test chamber for temperature and climate testing in research, development, quality assurance, and industry. Technical data: Temperature range: -40 °C to +180 °C Temperature change rate (heating): approx. 3.4 K/min Temperature change rate (cooling): approx. 1.7 K/min Temperature stability (-40 °C to +100 °C): ±0.3 K Temperature stability (+100.1 °C to +150 °C): ±0.5 K Temperature stability (+150.1 °C to +180 °C): ±1.0 K Humidity range: 20 to 98 % RH Humidity stability: ±2.5 % RH Internal dimensions (W x H x D): approx. 600 × 850 × 800 mm External dimensions (W x H x D): approx. 1010 × 1690 × 1195 mm Electrical connection: AC 400 V / 3~ / 50 Hz Max. current draw: approx. 11 A Weight: approx. 350 kg Cooling: air-cooled No external water connection required Refrigerant according to label: R452A – approx. 1.2 kg Equipment: Touchscreen control Program and constant operation Temperature and humidity control Observation window in the door Stainless steel test chamber Interior lighting / Chamber Lamp Side cable/pipe entry Ø approx. 100 mm Overheat protection Hour counter integrated RS-232C interface Water tank system Specimen Power Supply Control Time Signal connection Condition: Used unit with signs of wear and tear consistent with age and use. Some rust and corrosion spots present in the lower cabinet area. Interior with signs of use. Optical condition see pictures. Scope of delivery: ESPEC Climate Test Chamber PL-3KPH Shelf included Scope of delivery as shown in the pictures Notes: Inspection possible by arrangement. Loading can be organized. Shipping possible. Subject to change, errors and prior sale. We will gladly answer any further questions by phone.

Condition: used, Year of construction: 1983, Additional title: lying tank in container Capacity: 32 hl Itedpsxbqrqofx Abnek Operating pressure: 2 bar Operating temperature: 20 °C Length: 4,65 m Width: 2,3 m Height: 1,95 m Weight: 2500 kg Features: Beer pump, thermometer, gas measurement, flow meter (Diessel), 2 cable drums, hose reel, safety valve, cleaning and filling connection, spray head, manometer, empty detection electrode Control cabinet, compressed air compressor (AltasCopco), pallet for 4 CO2 bottles, valves, pressure reducer

Condition: excellent (used), DEMAG hub motor 36/20 K6P for electric hoist P1600 available with clutch and brake disc on request Type 36/20 K6P, motor in good, tested condition Ijdpfx Ajv Uai Aobnstk Motor/armature/rotor/runner, bearing shields, clutch, brake also available separately P2000 casing, cable drum, cable guide from large stock

Condition: good (used), Year of construction: 2002, functionality: fully functional, USED Soraluce Soramill Model SP 10000 Travelling Column, Table Type CNC Milling Centre, with Automatic Oil Mist Lubricated Orthogonal Milling Head with 1 X 1 Degree Indexing and HEIDENHAIN TNC 430 M Control System. Year 2002 SN 8647 Table Area - 10000 x 1100 mm Column Traverse (X) - 8500 mm Vertical Traverse (Y) - 1600 mm Ram Traverse (Z) - 1200 mm Spindle Motor - 28 kW Iodjuv Hrdepfx Abnetk Spindle Taper - Standard ISO 50 BT50 tooling Pullstud - DIN 6987 2-Form A. ISO 7388/2-Form A Independent Gearbox with 2 Ranges Speed Range - 20 to 4000 RPM Feed Range - 5 to 5000 mm/min Rapid traverse rate - (X, Y, Z) 15,000 mm/min Preloaded double nuts and recirculating ballscrews to each axis. Linear Guiding System with recirculating cylindrical rollers and steel guideway assemblies in X, Y and Z axes Independent A.C Drive motor to each axis. Linear Transducer in X, Y and Z-axes with air purge system. Automatic tool clamping. Automatic hydraulic tool releasing device. CNC Control HEIDENHAIN TNC-430-M. (Flat TFT screen with digital drives) 9 axes CNC and 1 spindle, 5 of them simultaneously interpolated. Working area lighting Electrical cabinet cooling system Electrical cabinet lighting Heidenhain HR410 portable electronic handwheel with 3m spiral cable Horizontally articulated pendant for CNC control Orthogonal head 28KW, 800Nm, 1deg x 1 deg, 4000rpm oil lubricated Price includes oil cooling unit for both head and gearbox. Option G2, Ram prepared for 4000rpm, is also included. Coolant through the spindle type AD. Coolant system with 500l capacity tank with two pumps providing low and high pressure of 3 and 8 bars and 50l/min flow. The system includes a combined paper and magnetic drum-filtering unit. Standard operators platform fixed to the column 40 tools capacity toolchanger magazine, BT50 Max. Tool length = 400 mm. Max. Tool diameter: - With full magazine = 120 mm. With adjacent position empty = 250 mm. Max. Tool weight = 20 kg. Mean tool weight with full magazine = 10 kg. Max. Permitted total weight = 20 kg. Swarf Conveyor Hinge type conveyor belt Machine preparation for the addition of a 4th axis electro-mechanical table. Splash Guarding against swarf at the table front and both sides. Consists of four sliding front doors with a height from the floor of 2.100mm and a length of 1.700mm each one. Manually operated opening and closing with mechanical interlock. The doors can be opened for the full longitudinal traverse. The rear of the table is open. Protection in the back and both lateral sides of the machine column.

Condition: excellent (used), Hilger & Kern P80 Pump Basic version P80 Drum size 80l Transmission ratio (drive) 56:1  Delivery rate (at 20 double strokes) l/min 0.61 Material Viscosity  (ball valve pump/scoop piston pump) 2.5 mio. Ijdpfx Abeg Ib Npjnetk Working pressure (max.) bar 20-250 (315) Air consumption at 20 double strokes l/min 220 Dimensions base plate (A x W) mm 610 x 500 Height retracted mm 1400 Height extended mm 2200 Weight without container kg 65 / 72 Maximum pack height mm 750 Maximum pack size 80 Maximum outer container Ø mm 440 A single pump is included in the delivery Complete factory lock, Large selection of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: new, Year of construction: 2025, overall weight: 150,000 kg, We offer Lines for shredding and separating non-ferrous metals and copper cables. The line can be freely modified according to the customer's needs. The attached visualization is illustrative. Machines included in the line: Drum Belt Magnetic Separator Multi-shaft shredder 2 x 18.5 kW MCW-110 1. Loading conveyor (controlled automatically by shredder, according to load) Technical data: - L – 4000mm -Working width – 720mm - Height – 2100mm - Geared motor – 1.5kW - PVC conveyor belt equipped with straight cleats. - Steel structure, placed on self-adjusting wheels 2. Unloading conveyor (receives the shredded material for further process) Technical data: -L. – 3600mm - Working width - 400mm - H – 2000mm - Geared motor – 1.1kW - PVC conveyor belt equipped with a sealing wave and straight cleats - Structure made of acid-resistant steel, placed on self-casting wheels 3. Magnetic separator – (automatically separates unwanted steel elements from the belt of the unloading conveyor) Technical date: - L – 1400mm Itjdjv I Shdepfx Abnsk - Working width – 380mm - Height – 300mm - Geared motor – 0.55kW - Structure made of acid-resistant steel - PVC conveyor belt equipped with straight cleats - Magnetic plate made of permanent magnets 4. Magnetic plate with quick-cleaning overlay – (separates very small steel elements) Technical date: - W – 490mm - L – 330mm -H- 80mm - Housing made of acid-resistant steel Vibrating feeder PWR-1000 Eddy Current Separator WPS-1000 Discharge conveyor no. 2 of the WPS-1000 separator . Horizontal shredder RKZ-1200 Dust extraction DUST EATER OPW-400 GoldRiver SWZ-700 Water Separator Automatic plastic receiver Automatic metal vibration receiver.

Condition: excellent (used), Binder MKFT 720 E3.2 Temperature and Humidity Chamber Device Data Manufacturer: Binder Type: MKFT 720 E3.2 Year of Construction: 2017 Article Number: 9020-0288 Design: Temperature and Humidity Chamber Cooling: Air-cooled Description Isdpey H H Smjfx Abnjtk Used temperature and humidity chamber from Binder. Suitable for temperature, climate, material, and aging tests, as well as stress tests. Application in industry, research, development, and quality assurance. Technical Data Temperature range: -70 °C to +180 °C Humidity range: 10 % to 98 % RH Internal volume: approx. 734 liters Max. total load: 160 kg Max. load per shelf: 40 kg Dimensions External (W x H x D): 1615 x 2005 x 1230 mm Internal (W x H x D): 1200 x 1020 x 600 mm Electrical Data 400 V / 3N~ / 50 Hz Power: 13.0 kW Current: 22.5 A Protection class: IP 20 Refrigeration System Refrigerant: R404A / R23 Stage 1: 4.00 kg Stage 2: 0.87 kg Two-stage refrigeration system Max. operating pressure: 29 bar Performance Data Temperature Temperature deviation over time: 0.1 to 0.5 K Temperature deviation spatially: 0.3 to 2.0 K Heating rate: approx. 4.8 K/min Cooling rate: approx. 4.0 K/min Heat compensation: approx. 5000 W Performance Data Climate Climate range: +10 °C to +95 °C Humidity range: 10 % to 98 % RH Temperature deviation: 0.1 to 1.0 K Heat compensation: approx. 800 W Equipment Touch control panel Program and constant operation Observation window Stainless steel test chamber Internal lighting Cable entry Movable on rollers Robust industrial design Weight approx. 635 kg Scope of Supply Binder MKFT 720 E3.2 Temperature and Humidity Chamber Scope of supply as shown in the pictures Functional testing Refrigerant service Leak test Test run with protocol Condition: Used. Condition: See pictures. Inspection possible by arrangement. Loading and transport can be organized upon request. Subject to changes and prior sale. If you have any questions, please do not hesitate to contact us.

Condition: used, maximum load weight: 36,700 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, first registration: 04/2004, loading space length: 14,300 mm, loading space width: 2,500 mm, loading space height: 900 mm, Equipment: ABS, Stock no. 5827 Itjdpfx Aboy T Dlwjnsk Doll low-bed semi-trailer with a maximum loading area of 14.30m / 4 axles with forced steering / cable control ----* Manufacturer: Doll * Type: S4H-N * First registration: 04/2004 * Total weight: 50,000 kg * Unladen weight according to vehicle registration document: 13,300 kg * Payload: 36,700 kg * Axles: 4 x SAF electro/hydraulic forced steering / drum brakes * Suspension: Air suspension with lifting and lowering function * Tires: 235/75 R 17.5, approx. 50% tread, on steel rims * Color: Gray * EBS Wabco * Low-bed: approx. 9.30m long (+5.00m) x 2.50m wide * Low-bed extendable to approx. 14.30m (5m extendable) * Low-bed widenable to approx. 2.98m * Loading height when loaded approx. 0.90m * Gooseneck approx. 3.60m long * Intermediate table movable * Removable aluminum side boards, approx. 0.40m high * Removable stakes * Pockets for inserting stakes * 3 pairs of lashing points (3.2t) on the gooseneck * 7 pairs of folding lashing eyes (3.2t) in the low-bed * Floor: steel/wood * Toolbox at the front of the gooseneck * Full-load supports at the front * Mechanical supports at the rear * Central lubrication system * Cable remote control for forced steering with connection for front or rear * Extendable warning signs at the front and rear * LED reversing lights German trailer!! German documents!! Cable control!! Note regarding possible errors in the advertisement: Despite careful preparation of the advertisement, occasional errors may have crept into the text or the information provided. We assume no liability for errors, changes or sales that may occur in the meantime. All information is provided without guarantee. Please contact us to verify details or clarify any further questions.

Condition: good (used), Year of construction: 1992, Indoor crane, crane, electric wire rope hoist, hoist, motor winch, motor winch, tackle, traction winch, block and tackle -Manufacturer: steel, crane chassis with electric cable pull -Crane chassis: Type GO 24 20 16 -Traveling speed: 20 m/min -Roller pitch: 800mm -Cable: Type AS 2010 -Traction: 1000 kg / load capacity 4000 kg -Drum speed: 16 m/min / stroke 4 m/min -Lifting height: mm -Transport dimension: 1250/1180/H400 mm -Own weight: 356 kg Itodpfol Tuvdjx Abnjk

Condition: as good as new (ex-display), overall weight: 1,300 kg, empty load weight: 940 kg, maximum load weight: 260 kg, loading space length: 3,130 mm, loading space width: 2,170 mm, loading space height: 2,120 mm, tire size: 165r13c, Car trailer as a construction trailer for 6 people. The insulated *stay trailer* is suitable for all seasons. The 50 mm sandwich construction and 60 mm insulated floor keep out the heat and cold. The electric heating provides support in winter. A crew trailer can be used on any construction site. It is even easier to get to the construction site with such a *car trailer* as it can be driven to the construction site behind almost any car. It can also be used as a *burro trailer*. Iodpfx Aeqwi H Nobnstk Our construction trailers have as standard an entrance door with personal lock, stairs can be hooked in, 50mm Snadwich structure outside silver inside white, iso floor in 60mm, PVC aud floor, refrigerator, coffee machine, connection cable, 230V fuse box with FI, sockets, switch and interior light, table and chairs for 6 workers, shelf, window with safety cover, coat hooks, four stable crank supports, 230V power socket, stable frame and galvanized V-drawbar. Further technical details can be found below. Accessories for construction trailers include a toilet room with toilet, storage room, other sizes for up to 16 people, 100 km/h shock absorber and anti-theft device.

Condition: excellent (used), 5 x aluminum silos standing on a foot ring (plastic granulate silos) - second-hand - designed for a bulk density of 0.6 kg/dm³ Technical data / dimensions Available quantity: 5 Volume: approx. 100,000 liters Container type: Silo Condition: used Design: upright External diameter: approx. 3,000 mm Cylindrical height: approx. 16,250 mm Total height: approx. 17,500 mm Specific weight of the medium: 0.6 to/m³ Material / composition Jacket material: Aluminum Features Stand form: Foot ring/stand frame Top base type: Conical base Gradient: approx. 15% Bottom shelf type: Cone Cone inclination: 90 degrees Top floor: 1 x DN 600 access dome with hinged lid and safety grille 1 x NW 200 ventilation nozzle with rain hood 1 x flange nozzle for Silopilot (level measurement) 1 x Block flange for full detector 1 x Roof edge railing with handrail 2 x crane eyes Jacket: 1 x access door 850 x 2025 mm 1 x filling pipe NW 80 with tangential entry into the silo, ending at the bottom in B-coupling at the bottom 1 x cable protection conduit (19 mm) Itjdpfxstq A Eme Abnok 1 x connection piece for full detector Various openings in the frame shell for the passage of pipes The silo ends at the bottom in a 90° cone with an outlet flange DN 500 (outlet height: approx. 500 mm). Remarks: The currently connected measurement and control technology is included (if available). However, no warranty is given for their function! One of the silos has a two-pass access ladder with back protection and dwelling platform (surcharge: € 1,500 plus VAT). Otherwise according to pictures and drawing

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 532.323/10-0, total height: 6,454 mm, total width: 6,810 mm, total length: 2,810 mm, load capacity per storage section: 180 kg, load capacity: 40,000 kg, A set of 2 Hänel Lean Lifts in a linked lift system is being auctioned here! Machine numbers: 532.323/10-0*1 & 532.323/10-0*2 Exact model designation: Hänel Lean Lift 3060-825/281/340/75/180/40HS TECHNICAL DETAILS Load capacities (each) Max. container load: 180 kg Max. number of containers: 163 Max. total load: 40,000 kg per Lean Lift (deduct container weight) Access point 1 (front side) Clear opening height: 880 mm Access height: 890 mm (standard height) Access point height to operator’s floor: 890 mm LED lighting: yes Manual sliding door: yes Light curtain: yes Access point: Optoelectronic identification system (28-fold) for precise measurement of goods height Drive and travel speed Vertical speed without container: max. 1.83 m/s Vertical speed with container: max. 0.95 m/s Horizontal speed: max. 0.5 m/s Connection: 400 V / 20 A at 50 Hz Lift capacity: 5 kW Vertical motor power: 4 kW Horizontal motor power: 0.37 kW Lift control Controller type: MP 14 N-H TFT Display: Touch display with integrated alphanumeric keypad and function key block Isdpfsxr Ng Uex Abnstk USB interfaces: 1 Serial interfaces (RS-232): 2 Ethernet interface: available, for HOST integration (communication with any ERP system) Protocol: SOAP protocol Operating mode: HostWebSOAP for warehouse management in WMS Display language: German (DE) Additional memory card: included, for S-Version (standalone) Module 00 - remote-controlled lift operation Safety equipment: special protective equipment required for remote control outside the field of view MACHINE DETAILS Unit height: 6,454 mm Unit width per system/total: 3,405 / 6,810 mm Unit depth: 2,810 mm Net weight without containers per system: 4,371 kg Container empty weight per system: 2,275 kg Electrical data Phases: 3 Frequency: 50 Hz Voltage: 400 V Current consumption: 10.2 A Minimum cable cross-section of power supply: 2.5 mm² at 9.6 A Maximum fuse rating of power supply: 20 A / 400 V Colour: Pearl grey EQUIPMENT - Hänel Pick-o-Light-Vario (2-axis movable LED light field for colour-marking the requested item) - Height sensors for automatic fill height recognition and height-optimized storage - Hänel slot wall: 131 usable shelf profiles, slot profile 75 mm, container usable heights: 55 - 730 mm in 25 mm increments - High-Speed Generation for increased vertical and horizontal travel speeds - ESB Package: Redundancy system consisting of 8 integrated safety circuits + 2nd safety circuit

Condition: excellent (used), functionality: fully functional, power: 160 kW (217.54 HP), fuel type: electric, maximum load weight: 48,800 kg, lifting height: 18,000 mm, Year of construction: 2012, Fuchs Terex RHL860D – Electric Material Handling / Loading Equipment We offer this excellent-condition, ready-to-work Fuchs Terex unit. Manufacturer: Fuchs Terex Model: RHL860D Year of Manufacture: 2012 Condition: Very good This machine is fully electric driven, offering significant operational and environmental advantages: Key Advantages of Electric Drive: Zero CO₂ emissions Low noise levels with high-torque electric motors Minimal heat generation Future-proof drive technology Iodpfjyf Nnyjx Abnetk Low maintenance and operating costs Comprehensive monitoring of power supply quality and machine grounding Designed for 24/7 operation Large working radius, expandable with optional cable drums or power packs An ideal solution for efficient, sustainable, and continuous material handling operations. Shipping assistance available from the Port of HaminaKotka, Finland. An electric excavator is well suited for this type of application, where the need for relocation is minimal. When necessary, the machine can be driven to the maintenance hall using a dedicated power cable. Compared to an internal combustion engine, the electric motor is largely maintenance-free. Another major advantage of electric power is that fuel does not gel even in severe cold conditions. During cold periods, the hydraulic system is kept continuously running, ensuring that the hydraulic oils remain warm. The Terex Fuchs contains 700 liters of hydraulic oil, and oil change intervals are determined through oil sample analysis. A significant reduction in operating costs is achieved through electric operation, which is considerably cheaper than diesel. The power supply comes from the factory network at 690 volts, which is stepped down on the machine to the Terex Fuchs operating voltage of 400 volts. The electric motor driving the hydraulics has an output of 160 kW. The pump delivers nearly 500 liters per minute at a pressure of 360 bar. Power to the pump is supplied according to the oil demand of the hydraulic consumers, which reduces overall power requirements.

Condition: good (used), Year of construction: 2002, functionality: fully functional, USED Soraluce Soramill Model SP 10000 Travelling Column, Table Type CNC Milling Centre, with Automatic Oil Mist Lubricated Orthogonal Milling Head with 1 X 1 Degree Indexing and HEIDENHAIN TNC 430 M Control System. Year 2002 SN 8647 Table Area - 10000 x 1100 mm Column Traverse (X) - 8500 mm Vertical Traverse (Y) - 1600 mm Ram Traverse (Z) - 1200 mm Spindle Motor - 28 kW Spindle Taper - Standard ISO 50 BT50 tooling Pullstud - DIN 6987 2-Form A. ISO 7388/2-Form A Independent Gearbox with 2 Ranges Speed Range - 20 to 4000 RPM Feed Range - 5 to 5000 mm/min Rapid traverse rate - (X, Y, Z) 15,000 mm/min Preloaded double nuts and recirculating ballscrews to each axis. Linear Guiding System with recirculating cylindrical rollers and steel guideway assemblies in X, Y and Z axes Independent A.C Drive motor to each axis. Linear Transducer in X, Y and Z-axes with air purge system. Automatic tool clamping. Automatic hydraulic tool releasing device. CNC Control HEIDENHAIN TNC-430-M. (Flat TFT screen with digital drives) 9 axes CNC and 1 spindle, 5 of them simultaneously interpolated. Working area lighting Electrical cabinet cooling system Electrical cabinet lighting Heidenhain HR410 portable electronic handwheel with 3m spiral cable Horizontally articulated pendant for CNC control Orthogonal head 28KW, 800Nm, 1deg x 1 deg, 4000rpm oil lubricated Price includes oil cooling unit for both head and gearbox. Option G2, Ram prepared for 4000rpm, is also included. Coolant through the spindle type AD. Coolant system with 500l capacity tank with two pumps providing low and high pressure of 3 and 8 bars and 50l/min flow. The system includes a combined paper and magnetic drum-filtering unit. Standard operators platform fixed to the column 40 tools capacity toolchanger magazine, BT50 Max. Tool length = 400 mm. Max. Tool diameter: - With full magazine = 120 mm. With adjacent position empty = 250 mm. Max. Tool weight = 20 kg. Mean tool weight with full magazine = 10 kg. Max. Permitted total weight = 20 kg. Swarf Conveyor Hinge type conveyor belt Itsder Hr Arepfx Abnok Machine preparation for the addition of a 4th axis electro-mechanical table. Splash Guarding against swarf at the table front and both sides. Consists of four sliding front doors with a height from the floor of 2.100mm and a length of 1.700mm each one. Manually operated opening and closing with mechanical interlock. The doors can be opened for the full longitudinal traverse. The rear of the table is open. Protection in the back and both lateral sides of the machine column.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,840 kg, maximum load weight: 21,160 kg, overall weight: 26,000 kg, axle configuration: 2 axles, loading space length: 12,050 mm, loading space width: 2,550 mm, total length: 12,200 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Chassis, semi-trailer, transport company Fine-grained steel welded construction, turntable with replaceable 2" kingpin, reinforced mounting point for "gallows" attachment, and with sturdy wear plates all around, attachment rail for aluminum ramps at the rear Outer frame slightly inclined, new design with "Load-Lock profile" for securing lashing straps, "patented Load-Lock cross" for securing lashing straps, in the cross member under the outer frame, 24-ton, two-speed support winch, single-sided operation, with straight lower part, without stroke compensation, free support foot angle or free swivel radius to the rear approx. 1920 mm, without supports, 2 shims with holder, aluminum side impact protection, steel under-run protection, quarter panel fenders in front of and behind each axle, without bull bar, spare wheel holder for 1 spare wheel, with wheel fastening kit, spare wheel, manufacturer same as standard tires, steel rim Plastic toolbox, with insert, w=620/h=360/d=440 mm, lockable with a padlock Axles + Suspension Drum brake axles, "axle/chassis laser-aligned" to reduce tire wear and fuel consumption, without steering, air suspension, without lift axle Braking system 2-line compressed air braking system, color-coded line routing for easy maintenance, spring-loaded parking brake Itedpfxjzb Ikfe Abnsk 2 foolproof coupling heads at the front, without connecting line, EBS, electronic braking system with EBS socket at the front, without connecting cable, note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with raising and lowering valve, vehicle stability system Wheels and tires 205/65 R17.5, manufacturer's choice for 8-ton axle load at 80 km/h, steel rims, factory silver Electrical system 24 volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red marker lights at the rear, 1 x 15-pin socket at the front, without connecting cable, LED work lights in a curved design (switched via reversing light), if technically possible, additional LED work light at the rear, switched via reversing light Floor Sieve-printed panels approx. 30 mm thick, for high point load capacity for forklift axle load up to max. 5600 kg Front wall / front corner posts 25 mm aluminum hollow profile, 1350 mm high, corner posts steel in full volume design Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements.

Condition: used, Year of construction: 2019, Henkovac T4 – Professional Vacuum Packaging Machine (2019) Reliable vacuum performance with robust build quality for food‑industry environments. Ijdpfx Aoyudtiobnetk The Henkovac T4 is a compact yet powerful tabletop vacuum packaging machine engineered for professional food processors, restaurants, butcheries, and commercial kitchens. Featuring a high‑quality pump and intuitive controls, the T4 delivers consistent vacuum sealing performance for a wide range of products. Technical Specifications - Model: Henkovac T4 (Tabletop) - Year: 2019 (design generation from this period) - Vacuum Pump Capacity: 16 m³/h – reliable throughput for medium‑duty packaging operations - Chamber Dimensions: approx. 530 × 590 × 460 mm - Seal Bar Length: approx. 420 mm - Weight: ~55 kg - Standard Power: 220‑240 V, single phase, 50/60 Hz (other voltages on request) Key Features - High‑Quality Busch Vacuum Pump: Proven reliability and performance for continuous operation - Deep‑Drawn Stainless Steel Vacuum Chamber: Durable, easy‑to‑clean construction - Maintenance‑Friendly Design: Simple access and serviceability help reduce downtime - Cable‑Free Welding Bar: Clean sealing without clutter, enhancing hygiene and safety - Intuitive Control Panel: Digital time control with optional program upgrades - Optional Consumables Starter Kit: Includes Teflon tape and welding wire for immediate use Ideal For - Vacuum packaging of meats, cheeses, dry goods, and prepared foods - Retail food‑to‑go operations - Small to medium commercial kitchens - Product portioning and shelf‑life extension * Model: Henkovac T4 (Tabletop)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 2,520 kg, maximum load weight: 8,000 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,050 mm, loading space height: 400 mm, total length: 7,280 mm, total width: 2,550 mm, total height: 2,900 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. Chassis: Central axle trailer, low loader Fine-grained steel welded construction Gear-supported front support Telescopic rear support 2 chock blocks with holder Fenders made of sheet steel over both wheels with anti-splash flaps only on the last axle Aluminum side impact protection Front crossbar that can be inserted into the floor holes Coupling device for central axle trailer Drawbar with tested 40 mm towing eye Drawbar height-adjustable via spindle, max. adjustment range 250 mm Axles + Suspension BPW drum brake axles "Axle/chassis laser-aligned" – reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (linkage compensation) Wheels and tires 235 / 75 R 17.5" Ijdpezcnugofx Abnotk as per manufacturer's choice Steel rims, factory silver Braking system 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle Parking sockets for electrical wiring, ABS/EBS and air connection to the drawbar 24 Volt EBS, Electronic Braking System with EBS plug at the front, with connecting cable Caution: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! "TPMS" tire pressure monitoring system according to ECE R 141, display via display in the towing vehicle, via EBS Electrical system 24 Volt, multi-chamber lights in LED, yellow LED lighting on the side, license plate lighting in LED Yellow LED lighting on the side coupled with the turn signal "flashing side lights" 2 white position lights at the front in LED 2 white/red outline lights at the rear in LED Premium LED side marker lights, with "20 LED diodes per light" 2 x 7-pole fail-safe plugs at the front, with connecting cable Platform TTS low-lying steel tub, platform floor made of steel/non-slip metal plate, steel walls firmly welded to the floor Platform length 5500 mm Tub with "Load-Lock profile" at the front and on the side for attaching lashing straps (8 pieces at the front, 16 pieces on each side) 2 pairs of lashing rings, 1 x at the front in the corners of the steel tub and 1 x at the rear in the floor, each 5 tons 3 pairs of additional lashing rings in the floor, each 5 tons 4 pairs of lashing rings screwed onto the side walls Ramps Steel ramps, 2,300 mm long, 510 mm wide, can be shifted sideways with handrail on the ramps covered with wood (tip area with steel/non-slip metal plate) with gas spring for single-person operation Rear wall / rear corner posts Screen-printed panel, 400 mm high, pluggable, between ramps Operating instructions The specified total weight is technically possible, depending on the load, the total weight may not be reached while complying with the permissible axle/support and saddle loads. Country of registration / signs Country of registration: Germany Type approval according to EG 2007/46 prepared for license plate holder, single-line Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear Warning sign according to ECE - 70 Custom-made transport solution

Condition: used, functionality: fully functional, machine/vehicle number: W09STP238JWS27366, empty load weight: 12,480 kg, maximum load weight: 25,520 kg, overall weight: 38,000 kg, axle configuration: 2 axles, first registration: 04/2018, next inspection (TÜV): 05/2027, suspension: air, tire size: 235/75 R 17,5, color: grey, Equipment: ABS, tail-lift, Object number #31021 BPW Eco-Plus Drum brake Steering axle A2 Tire size 235/75 R 17.5 Sliding curtain Itsdpfjzta T Usx Abnok Sliding tarpaulin Loading ramp Hydraulic lift platform Cable winch Hydraulic rear supports (2x) Rear extension possible Mechanical lifting roof ABS/EBS Raising/lowering Heavy-duty tie-down straps, external and central Storage box inside Interior lighting Remote control for ramp and platform Leasing or financing available upon request!

Condition: used, functionality: fully functional, machine/vehicle number: W09STP238JWS27366, empty load weight: 12,480 kg, maximum load weight: 25,520 kg, overall weight: 38,000 kg, axle configuration: 2 axles, first registration: 04/2018, next inspection (TÜV): 05/2027, suspension: air, tire size: 235/75 R 17,5, color: grey, Equipment: ABS, tail-lift, Object number #31021 BPW Eco-Plus Drum brake Steering axle A2 Tire size 235/75 R 17.5 Sliding curtain Isdpfxjzta Uxs Abnetk Sliding tarpaulin Loading ramp Hydraulic lift platform Cable winch Hydraulic rear supports (2x) Rear extension possible Mechanical lifting roof ABS/EBS Raising/lowering Heavy-duty tie-down straps, external and central Storage box inside Interior lighting Remote control for ramp and platform Leasing or financing available upon request!

Condition: used, maximum load weight: 6,800 kg, overall weight: 9,900 kg, axle configuration: 1 axle, first registration: 06/2026, Year of construction: 2026, Müller-Mitteltal KWH 9,9 ML Cable Transport Trailer with Diesel Engine * KWH 9,9 ML * Drum brake braking system EBS 2S/2M * BPW axles * Leaf spring suspension, parabolic spring * Spring-supported square tube supports at the rear with base plate and safety locking pins for various support heights Isdpoy R Ipnjfx Abnotk * Drawbar with 40 mm or 50 mm screw-on drawbar eye (height-adjustable, in mm) * Bracket for additional drawbar, mounted on the side of the drawbar, on the right side in the direction of travel * Chassis made of torsionally rigid square tubes and cross members * Plastic toolbox * LED lighting * Swiveling cable drum assembly consisting of a base frame, bearings, and drum support arms * Support arm ends with clamping device for securing the drum shaft * Locking of the swiveling cable drum assembly to the chassis via a centrally located claw lock * Steel drum shaft, 76 mm diameter, with centering and rotatable ends * With a drum diameter of 3,000 mm, a maximum drum width of 1,650 mm is possible * Motor-hydraulic pull and push cylinders with load-holding valve * Control valve with automatic zero position and pressure relief valve * Connectors, hoses, and pipes of the hydraulic system in NW 13 * Required oil consumption approx. 10 liters * Drum drive, motor-hydraulic, with oil motor, valves, and rubber-coated drive rollers (adjustable). Hydraulic speed regulator and brake for drum drive * Hydraulic pump unit with diesel engine and manual starter, 6.5 HP with gear pump (150 bar) * Pressure supply by switching the connection lines, either via truck hydraulics or the pump unit * Cover as weather protection, hot-dip galvanized without topcoat * Tires 315/80 R22.5 Subject to prior sale and errors! Sale exclusively subject to our general terms and conditions. Important note – Important information: Despite careful checking of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it provides information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,000 kg, maximum load weight: 15,000 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,470 mm, total width: 2,550 mm, total height: 1,040 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. *Chassis with swivel turntable Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 1 pair of removable guide rollers, additional 4 container locks with sturdy 20"-based arms for swap bodies 7.15 and 7.45 Swivel frame with heavy-duty ball bearing swivel ring Wheel chocks with holder Aluminum side impact protection Side impact protection set inward for optimal clearance to the swap body supports Steel underrun protection Underrun protection shortened for optimal clearance to the swap body supports; lighting system mounted in a protected position Rear mud flaps across the entire width (not compatible with forklift mount) Quarter-shell front fenders and half-shell rear fenders *Towing equipment for trailer turntable Towing fork with certified 40 mm tow eye Towing fork mechanically adjustable in length by approx. 6 x 100 mm (approx. 1900–2500 mm); towing fork length set to 2200 mm *Axles + Suspension BPW or SAF drum brake axles, at the manufacturer’s discretion “Laser-aligned axles/chassis” to reduce tire wear and fuel consumption Air suspension *Brake System 2-line compressed air brake system Itsdpfx Aszd Uvljbnek Color-coded piping for easy maintenance. Air reservoir: 180 liters Spring-loaded parking brake 2 non-reversible coupling heads at the front, with connecting lines to the tractor unit, EBS, Electronic Brake System with EBS connector at the front, with connecting cable, Caution: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With raise/lower valve, hold function in both lower and raise positions Axle load detection via EBS CAN bus signal, for display in the cab; the truck must be equipped accordingly; no truck installation (no calibrated scale) Tire pressure monitoring system *Wheels and tires 235/75 R17.5, brand selected by the manufacturer Steel rims in twin configuration, factory silver *Electrical System 24 volts, Aspöck Eco LED II multi-chamber lights, yellow LED side lighting linked to the turn signals (“flashing side lights”), LED license plate lighting, (Note: With certain towing vehicles, false diagnostics may occur even though the system is functioning properly) 2 white LED front position lights 2 white/red rear lane-keeping lights (LED) 2 x 7-pin reverse-polarity-protected connectors at the front, with connecting cable, LED work lights on both sides (activated by the reverse light) 2 additional LED work lights at the rear, activated by the reverse light 1 LED work light at the front, centered between the crossbars, shining toward the rear, activated by the reverse light *Country of Registration/License Plates Germany with DEKRA approval and certification (in accordance with §13 EG - FGV) 24/7 service hotline prepared for single-line license plate holders Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red at the rear *Paint Finish Frame hot-dip galvanized or painted according to customer preference

Year of construction: 2009, condition: used, functionality: fully functional, machine/vehicle number: 001-2009, MAPSFERA 1 09 METAL SORTING LINE, consisting of a vibrating feeder, conveyor belt, head magnetic pulley, and eddy current separator, designed for efficient automatic separation and recovery of ferrous and non-ferrous metals in industrial recycling applications. • Manufacturer: MAPSFERA • Model: 1 09 • Configuration: vibrating feeder + conveyor belt + magnetic pulley + eddy current separator • Application: separation of ferrous and non-ferrous metals from mixed waste streams Isdpozbtrzjfx Abnotk • Status: available for inspection • Current condition: dismantled / stored The system is designed for continuous industrial operation in material recovery and recycling plants, enabling highly efficient metal sorting from mixed input streams. The vibrating feeder ensures a controlled and uniform material flow, while the conveyor system transports the material through the various separation stages. The head magnetic pulley removes ferrous metals, and the eddy current separator allows for the effective separation of non-ferrous metals such as aluminum and copper, improving overall recovery rates and material purity.

Condition: excellent (used), Professional hydraulic set from the renowned manufacturer HURST / Hale Fire Pump Co., used in technical rescue applications (fire brigade, rescue services). ——— Condition: Used, fully operational, and tested equipment Shows normal signs of use as seen in the photos Technically in good condition – ready for work Itedpfxoyxr Dxs Abnsk ——— Technical specifications: • Model: SP 45 • Manufacturer: Hale Fire Pump Co. / HURST • Year of manufacture: 1992 • Operating pressure: 350 BAR • Power supply: 230V (single-phase) • Standard: DIN 14751 ——— Set includes: • HURST hydraulic pump • Hydraulic shears • Spreader • Hydraulic hoses (2 pcs.) • Cable drum • Set of quick couplings • Transport frame ——— Applications: • Road rescue • Technical work and demolition • Rescue services / Volunteer / Professional fire brigades • Industry (spreading, cutting) ——— Advantages: • Robust, professional construction • High cutting and spreading force • Proven HURST technology • Complete set – ready for immediate use

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total length: 1,310 mm, total width: 390 mm, total height: 40 mm, 120 pcs. Shelves approx. 131 x 39 x 4 cm , SSI Schäfer R3000 , II. choice (new) Shelving racks Workshop shelving , Storage racks , Manual storage , Push-in shelving , Small parts storage B40/392/70 , ZB341315 , ZB9414 Data : - Length: approx. 131.2 cm - Width: approx. 39 cm - Height: approx. 4 cm - Scope: 120 pcs. Shelves SSI Schäfer R3000 - Load : max. 100 kg per shelf - Surface : sendzimir galvanized - II. CHOICE (NEW GOODS)(This is a II. Wahl product, new and unused.II. Choice means there may be dust deposits, minimal scratches or soiling). - ex warehouse Wietmarschen Price : 960,00 € net 1142,40 € gross You will receive an invoice with VAT shown. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Itodpfszuw Urox Abnsk Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, maximum load weight: 45,250 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete inventory of vehicles available for immediate and short-term delivery on our website. Excerpt from the equipment list. Full specifications available upon request. Chassis, stepped: * Special steel frame made from high-strength fine-grained steels, electrically welded at connection points * Generously dimensioned outer frame. 4-axle configuration * Wheel covers over the axles with spray suppression * All steel parts sandblasted * Side underrun protection made of anodized aluminum mounted * Increased point load approx. 30,000 kg over approx. 4,000 mm Iedpfx Abswx Dbienjtk * Special construction in the stepped area for the longest possible low-bed length in combination with AluLeg drop supports instead of telescopic support legs, maximum rear swing clearance of the tractor unit approx. 2,100 mm Special body with rear stake extension: * DINKEL – special body * Self-supporting aluminum roof beam / profile approx. 120 x 100 mm, sliding roof with plastic flaps * Rear stakes extendable for loading/unloading up to approx. 4,200 mm * Three sliding stakes per side with elastic relief * Additional intermediate stake lockings in roof beam and parked position, via pull cable and spring bolt * DINKEL – mechanical lift roof, height-adjustable * Lift roof height approx. 400 mm, operable from both sides or one side without opening the opposite side * Additional height adjustment of approx. 480 mm in approx. 40 mm increments by adjusting the stakes * Front cover at bulkhead for driving operation under the tarpaulin up to a total height of approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminum slats on the side, 450 pockets below, four rows of single pockets above. Only three rows of slats in the raised platform, spacings evenly distributed Floor: * Approx. 27 mm special waterproof bonded beech phenolic plywood, rough surface * Steel sheet in the wheel well area. Suitable for forklift traffic as per DIN standard * Outer frame flush with deck surface Brakes: * WABCO air brake system with EBS according to EC Directive 71/320, including PREV (Parking-Release Safety Valve) * Spring-loaded brake cylinders as parking brake * WABCO Smart Board with mileage counter and axle load display * Including WABCO tire pressure monitoring system Axles: * 4 x 10,000 kg SAF with drum brakes in low-loader design * Air suspension with lift and lower device, total lift approx. 230 mm * Third and fourth axles as friction-steered trailing axles with electric and mechanical lock Twin tires: * 235/75 R 17.5, 16-ply. Make of our choice, including spare wheel holder * Without spare wheel Lighting: * According to EU regulations, including LED side marker lights * Position lamps in LED design * 2 additional reversing lights * 2 work lights on the inside front wall, upper section Paintwork: * Chassis and body in one color, RAL 3002 carmine red * Intermediate stakes, axles KTL-coated black * Corner stakes hot-dip galvanized * Plastic parts black * Galvanized parts unpainted * Rims in factory silver Special equipment included: * 15-pin electrical supply cable * Air suspension in ECAS design, operated on the trailer * Oversize signage front and rear in galvanized, infinitely telescopic design with installed marker lights, including sockets for rotating beacons (small signs) * Additional external release for sliding roof frame lock * 4 stake adapters for special outer frame profile, to lock intermediate stakes as needed * PVC sliding tarpaulin, color similar to RAL 9