Used Booston Er-01H for sale (31,954)

Condition: excellent (used), Year of construction: 2011, Sprue picker Engel Type: ER-USP 5 Year of manufacture: 2011 Bwedpfx Aoxrv Uxol Ror

Condition: excellent (used), Year of construction: 2011, Sprue picker Engel Type: ER-USP 5 Year of manufacture: 2011 Bsdpfxsxq Tkhe Al Rswr

Condition: new, functionality: fully functional, New device Enmair Electro-pneumatic sprue picker ER available immediately from stock ER series type 650 Application range of 5 ton injection molding machine Horizontal travel 650 mm Vertical travel 125 mm Swivel angle 5 Gripper angle ° Lifting weight approx. 3kg Bracket on the back enables easy adjustment of the Swivel angle to the right / left, as required Bwodpfxjr A D Itj Al Rer Required operating air pressure 5 - 7 bar 220V 50 Hz Device can be offered with Euromap 12 or Euromap 67 plug, depending on the pre-installation on the injection molding machine. User interface: English, Dutch

Condition: used, functionality: fully functional, machine/vehicle number: 98124262, Year of construction: 2015, operating hours: 5,372 h, load capacity: 2,500 kg, lifting height: 200 mm, fuel type: electric, battery capacity: 375 Ah, battery voltage: 24 V, fork length: 1,150 mm, front tire type: polyurethane tires (non-marking), rear tire type: polyurethane tires (non-marking), empty load weight: 787 kg, Jungheinrich ERE 225 Pallet truck, year of manufacture 2015 Details: Jungheinrich ERE 225 Year of manufacture: 2015 Work hours (h): 5372 Lift height (mm): 200 Lift capacity (kg): 2500 Fork length (mm): 1150 Weight (kg): 787 Front wheels: Polyurethane Rear wheels: Polyurethane Battery capacity (Ah): 375 Battery voltage (V): 24 Bwedpfxex Sx Hms Al Rer Accessories: Load guard. Power steering.

Condition: excellent (used), functionality: fully functional, total length: 1,950 mm, total width: 1,500 mm, total height: 1,500 mm, Selling here a heat recovery system for compressed air systems. Original Atlas Copco. WRG system for compressor. Dismantled due to insufficient compressor performance. Bsdep N H Hujpfx Al Rowr Was hardly used :( Atlas Copco ER90 energy recovery unit - details attached as PDF. For water-cooled oil-free ZR compressor Turn your water-cooled, oil-free ZR compressor into an energy source for hot water with ER, our energy recovery unit. Power: 90 kw Special equipment: Reserve water pump - redundancy 2nd heat exchanger - Very good condition. Hardly ever used - poor planning! Unfortunately no documents available.

Condition: used, Year of construction: 2016, operating hours: 851 h, functionality: fully functional, machine/vehicle number: MN25724, working width: 1,500 mm, feed rate X-axis: 4 m/min, type of input current: three-phase, sheet thickness (max.): 50 mm, total length: 1,300 mm, total width: 2,600 mm, total height: 2,500 mm, overall weight: 2,600 kg, working height: 950 mm, workpiece height (max.): 50 mm, workpiece width (max.): 1,500 mm, The ER 1500 E is a deburring machine working from above on one side with the EdgeRacer carousel for precise processing of inner and outer contours with user-defined edge rounding. The EdgeRacer ER 1500 E offers a high throughput rate of more than 300 m²/h, surface-friendly processing - even with polished, brushed and foil-coated sheets - and reproducible results. Thanks to the roller conveyor of the EdgeRacer ER 1500 E, the sanding heads can also be fed below roller table level. The roller transport also ensures maximum energy efficiency - the processing costs are usually less than €0.01 per square meter of processed sheet metal. Thanks to the reversing operation, the sheets to be processed can be inserted and removed on the infeed side. Purchase the EdgeRacer deburring machine ER 1500 E as a demonstration machine with only 851 operating hours directly from the manufacturer. Bodpfxeucw Dze Al Rewr

Condition: used, Good day, We are offering used clamping devices from Erowa. These are part of the Erowa UPC system and are suitable for die-sinking EDM and milling. The following parts are available: Bwedotk Hakjpfx Al Rsr ER-048377 UPC Alignment pallet Erowa T-slot pallet 320x320 Base body made of aluminum, bars hardened and ground. ER-016917 UPC Aluminum pallet 320 x 320 x 40 with clamping bar They have been cleaned and checked by us. A functional test was also carried out. The clamping devices have signs of use and are technically in very good condition. Individual acceptance also possible. Spare parts are available. Do you have any questions? Then please do not hesitate to contact us.

Condition: used, Good day, We are offering used clamping beams from Erowa, System 3R and Becker Erodiertechnik. These clamping beams are suitable for wire erosion. The following parts are available: ER-017646 ER-017647 ER-017648 ER-021128 ER-021127 System 3R 3R-239-545-9911-V01 Becker erosion technology SB430-SB680 The clamping devices have signs of wear and are in very good technical condition. Individual acceptance also possible. Spare parts and accessories are available. Do you have any questions? Then we are at your disposal. Bwodpjtk N E Aofx Al Ror

Year of construction: 1958, condition: used, pressure 160 t Bsdpfxolp U Ebs Al Rswr throat 340 mm stroke 20-120 mm no. of strokes 45 Hub/min ram - range of adjustment 100 mm table surface area 800x620 mm ram surface 500x400 mm hole in the table Ø 360 mm tool hole in ram Ø 50 mm weight of the machine ca. 12 t dimensions of the machine ca. 2200x2000x3600 mm

Condition: used, Hello, we are offering two used Erowa precision holders 15 including clamping pins. They have been disassembled and cleaned by us and a functional test has also been carried out. The holders have the usual signs of use but are technically in very good condition. Price for both holders with clamping pins plus VAT. If you have any questions, please do not hesitate to contact us. Shipping possible for an extra charge. Bedeq Hu S Dspfx Al Rewr

Condition: used, spindle passage 25 mm turning speeds 5750 U/min Rest 4 straight turning atchm. - working travel . mm turret head 8 bar loader LNZ Hydrobar type 6.32HS-4.4 No.: ER25071388 Parts catcher The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Bwedpfx Aleyqurue Rsr We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), mileage: 28,919 km, power: 338 kW (459.55 HP), first registration: 11/2015, fuel type: diesel, axle configuration: 10x4, wheelbase: 5,100 mm, fuel: diesel, fuel tank capacity: 500 l, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2015, operating hours: 1,219 h, Equipment: ABS, air conditioning, central locking, crane, cruise control, electric window regulation, fog lights, navigation system, parking heater, power mirror, soot filter, spoiler, = Additional Options and Equipment = - Aluminium fuel tank - Brake booster - Roof spoiler - High beam - Low noise - Speed limiter - Air suspension - Air horn - Particulate filter - Radio/cassette player - Reversing camera - Sleeper cab Bwsdpfx Alsuu Dhlj Rer - Side skirts - Sun visor - Stability control - Auxiliary heater - Toolbox - Xenon lighting - PTO (power take-off) - Central lubrication = Additional Information = General Information Cab: FM Transmission Gearbox: I-SHIFT, automatic Axle Configuration Front axle 1: steered Front axle 2: steered Rear axle 1: twin tires Rear axle 2: twin tires Rear axle 3: steered Functionality Mast: telescopic Mast length: 42 m Lifting capacity: 70,000 kg Crane: ERKIN WORLD POWER ER 2070 4.1 CRANE, year of manufacture 2015, mounted behind the cab Body brand: ERKIN WORLD POWER ER 2070 T-4.1 CRANE CE marking: yes Condition Technical condition: very good Visual condition: very good Financial Information Price: Upon request

Condition: like new (used), Hello, we offer here a used Erowa adapter pallet PowerChuck P automatic, pallet was only for demo purposes in use. Condition as new. ER-115304. shipping and inspection possible For questions we are happy to answer. Bedpfx Aolz Nb Nel Rjwr

Condition: used, Hello, we are offering ten used Erowa precision holders 25 (ER-010607) including clamping pins, which have been disassembled, cleaned and also functionally tested by us. The holders have the usual signs of use but are technically in very good condition. Price per holder with clamping pin plus VAT. If you have any questions, please do not hesitate to contact us. Shipping possible for an extra charge. Bedpfx Asq Turiel Rswr

Condition: used, spindle passage 25 mm turning speeds 5750 U/min Rest 4 straight turning atchm. - working travel . mm turret head 8 No.: ER25071388 Parts catcher The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More Bodpfx Aljyqtc Ee Rswr than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, spindle passage 25 mm turning speeds 5750 U/min Rest 4 straight turning atchm. - working travel . mm turret head 8 bar loader LNZ Hydrobar Parts catcher The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Bwsdpfxjyquqwe Al Ror If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), functionality: fully functional, Hello, We offer used and new pallets for workpiece clamping from Erowa or compatible manufacturers. These are prepared to accommodate clamps with a 52mm pitch. We can also easily adapt clamps with a 96mm pitch. Clamping spigots included. Bwjdpfswa Ihiex Al Ror Individual acceptance is possible. Spare parts are available. The clamps are not for sale. The used clamping devices have been cleaned and tested by us. A functional test was also performed. The clamping devices show slight signs of wear. Do you have any questions? We would be happy to help.

Condition: new, Bernardo Topcut 3200 ER Panel Saw Technical Specifications Table dimensions 1100 x 735 mm Panel table 3200 x 400 mm Cutting length 3200 mm Max. saw blade diameter 400 x 30 mm Max. cutting height 90° / 45° 125 / 88 mm Cutting width with parallel guide 1300 mm Table height 890 mm Table extension 600 x 615 mm Table widening 825 x 750 mm Extension table with roller 1240 x 860 mm Main saw blade speed 3000 / 4000 / 5000 rpm Scoring saw blade speed 8000 rpm Scoring saw blade 120 x 20 mm Dust extraction connection Ø 100 mm Motor output S1 100% 5.5 kW (7.5 hp) Motor input S6 40% 7.5 kW (10.0 hp) Scoring motor output 0.75 kW Voltage 400 V Machine dimensions (W x D x H) 3420 x 3600 x 1610 mm Weight approx. 850 kg Scope of supply • Electric saw blade height adjustment • Digital cutting height display • Saw blade guard with infeed roller • Miter fence • Eccentric clamp • Table widening • Extendable telescopic fence Bwsdpfx Aljd N S T Dj Ror • Longitudinal fence flaps • Extension table with roller • Sliding block • Scoring unit with independent motor • Operating tools Features • Powerful drive motor (5.5 kW) with high torque, designed for optimal cutting performance • Smooth-running twin-roller carriage with center and end position locking for precise cuts • Maximum saw blade diameter 400 mm for cutting heights up to 125 mm • Extension table with roller for simplified handling of larger workpieces • Foldable parallel guide with micrometer fine adjustment (advantageous for large panels) • Standard equipment includes a separately driven scoring unit (motor output 0.75 kW) • Stable saw unit with pivot elements made of gray cast iron, guided on both sides • Table widening for cutting widths up to 1300 mm included in the scope of supply • All aluminum parts (panel table, fences, etc.) are anodized • Extendable telescopic fence (up to 3200 mm) can be mounted on the extension table at the front and rear, infinitely adjustable from 90° to 45°

Condition: used, Year of construction: 1987, functionality: fully functional, total length: 1,400 mm, total width: 600 mm, total height: 1,800 mm, input voltage: 380 V, input frequency: 50 Hz, The Koppens ER 400 enrober is designed to improve efficiency and precision in food production processes, particularly for enrobing products such as meat, fish and other preparations. Thanks to its robust design, it guarantees uniform and homogeneous coating, delivering a high-quality finished product with every cycle. In fact, this machine adapts easily to different types of production, making coating fast and precise. What's more, the Koppens ER 400 coater stands out for its ability to offer total control over production speed, enabling parameters to be adjusted to suit specific needs. With an integrated liquid pump, it facilitates even coating application, reducing raw material losses while optimizing results. What's more, its compact design enables seamless integration into existing production lines, while offering flexibility for diverse product types. Finally, this enrober contributes to increased productivity by reducing manual intervention, thus ensuring greater reliability and efficiency in food processing operations. In short, the Koppens ER 400 coater is an indispensable solution for companies seeking to optimize their coating processes. Bjdpfx Aou E N Iyjl Rswr Technical specifications: Power: 0.61 kW Frequency: 50 Hz Voltage: 380 V + 3 Ph Amperage: 3.2 A Weight: 135 Kg Belt width: 400 mm Mesh width: 5 mm Adjustable speed Liquid pump

Condition: ready for operation (used), Year of construction: 2019, operating hours: 6,000 h, functionality: fully functional, load capacity: 3 kg, arm reach: 1,130 mm, No minimum price – guaranteed sale to the highest bidder! Auction of two ABB IRB 360 (Flexpicker) robots including vision system! TECHNICAL DETAILS Payload: 3 kg Working area diameter: 1,130 mm Positional repeatability: 0.03–0.1 mm Path repeatability: 0.1–0.33 mm MACHINE DETAILS Weight: 120 kg Bodpfeznh T Eex Al Rjwr Supply voltage: 200–600 V Supply frequency: 60 Hz Power consumption at maximum load: 0.477 kW Payload for pick-and-place cycle: 1 kg Ambient temperature: 0 to +45 °C Relative humidity: max. 95 % Noise level: < 70 dB(A) Emissions: EMC/EMI shielded Operating hours: 6,000 h

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, operating hours: 16,584 h, load capacity: 6,590 kg, lifting height: 4,010 mm, construction height: 2,910 mm, fork carriage width: 2,000 mm, fork length: 1,800 mm, TECHNICAL DETAILS Load capacity: 6,590 kg Load center: 600 mm Lift height: 4,010 mm Overall height: 2,910 mm Fork length: 1,800 mm Fork width: 150 mm Fork thickness: 70 mm Fork carriage width: 2,000 mm MACHINE DETAILS Drive type: Internal combustion engine Mast type: Standard Dimensions and weight Dimensions (L x W x H): 3,550 x 2,000 x 2,910 mm Bwedozrgh Aopfx Al Rsr Dead weight: 12,270 kg Front tires: Superelastic, 8.25-15 Rear tires: Superelastic, 8.25-15 Operating hours: 16,584 h

Condition: used, Year of construction: 2013, power: 17.1 kW (23.25 HP), number of axes: 4, working width: 1,320 mm, milling spindle speed (max.): 24,000 rpm, working length: 2,500 mm, TECHNICAL DETAILS Working area, X-axis: 2,500 mm Working area, Y-axis: 1,320 mm Travel, Y-axis: 1,900 mm Max. panel thickness: 170 mm Work table: Cantilever and rail table Number of controlled axes: 4 Travel speed, X-axis: 80 m/min Travel speed, Y-axis: 80 m/min Travel speed, Z-axis: 20 m/min Drilling unit Number of drilling units: 1 Position of drilling unit: top Vertical drilling spindles: 10 Horizontal drilling spindles, X-direction: 4 Horizontal drilling spindles, Y-direction: 2 Total number of drilling spindles: 16 Milling spindle Number of milling spindles: 1 Position of milling spindle: top Controlled axes: 4 Automatic tool changer: yes Motor power: 13 kW Speed: 24,000 rpm Grooving unit Number of grooving units: 1 Position of grooving unit: top Bedpozmtlksfx Al Rjwr Design: fixed, for grooving in the X-direction Max. tool diameter: 120 mm Motor power: 1.7 kW Speed: 7,500 rpm Number of tool magazines: 2 Tool magazine, rear: 12 slots Tool magazine, side: 10 slots Total number of tool change slots: 22 MACHINE DETAILS Machine programming software: BiesseWorks Number of vacuum pumps: 1 Suction capacity per pump: 90 m³/h Total connected load: 17.1 kW EQUIPMENT CE marking Protective structure for machining units with safety sensors Safety system: front safety mats 4 consoles with suction cups for workpiece clamping 1 drilling unit, top 1 milling spindle, top 1 fixed grooving unit, top, for grooves in the X-direction 1 rear tool magazine with 12 slots 1 side tool magazine with 10 slots 1 vacuum pump Front safety mats The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8359

Condition: used, Year of construction: 2019, functionality: limited functionality, machine/vehicle number: 1000033397, Pre-owned Primus 402 Waterjet 5 Axis with one cutting head, has served us for 4 years cutting stone and ceramic benchtops, delivers great cutting capabilities across a wide range of materials, including stone, ceramic, metals, glass, and more. Key Features: - Pioneer Technology: Maximum programming flexibility thanks to the free movement of the cutting head. The 5-axis cutting head is fitted with the patented Intermac infinite rotating C axis system for making top-quality tilted cuts (+/-60°) on complex profiles, with no limits. - Versatile Performance: Primus offers the possibility to process a wide selection of materials such as: natural stone, sintered materials, ceramic, metal, glass, and more. - User-Friendly Interface: Equipped with iCam Software making it easy to program and operate, even for intricate projects. Bodpfx Alsytlb Se Rswr Condition: - The machine was installed in September 2019 and decommissioned in September 2023. It was running well at the time of decommissioning, with only inaccuracy when cutting circles. Some maintenance may be required to restore it to peak performance, but it remains in good working condition and ready for immediate use in your factory. - The machine’s Probe and Head Rotation Calibration devices may need maintenance or replacement. These features were not critical to our operations and, therefore, were never used. - Decommissioning was carried out by a highly respected and professional Machine Technician in New Zealand, who can also commission the machine installation at your facility. Contact details can be provided upon request. - EXW from Auckland, New Zealand. This is a fantastic opportunity to own a high-performing waterjet at a fraction of the cost of a new model. Contact us today to learn more.

Year of construction: 2021, condition: excellent (used), functionality: fully functional, In the Powder applicator it consists of a hopper and a vibrator feeder, that spreads out the granulate in an 130 cm and even coating Bedpfxex R N Urs Al Rjwr over the printed transfer paper on the under laying conveyer 140 cm wide net belt, 150 cm long. The machine is height adjustable 88-100 cm and has the total length 150 cm. The powder feeder as well as the conveyor are both individually adjustable for optimal processing. Excess powder is effectively removed by a combination of airstreams, scatter mechanism and brushing. The silent automatic self-cleaning filter system recycle the granulate back to the hopper for re-processing and exhausts filtered air. In order to minimise the influence of static electricity there is two antistatic bars across the conveyor.

Condition: ready for operation (used), Opelka Berliner fryer Donuts 12 fryers for sale with 20 racks with 18 trays each Bedpfx Alsxwy E Es Rjwr