Used Automatic Horizontal Press for sale (36,658)

Condition: new, Year of construction: 2026, neu 2026 060215 prompt, Zwischenverkauf v Türkei 9280 € 179.1 € 1 Schwenkrahmen 3160x27x0,9 mm 20-100 m/min 270 mm 270 mm 340x220 mm rund 230 mm, quadratisch rund 150 mm, quadratisch rund 180 mm, quadratisch 910 mm 0.37 kW Tsdpswirktjfx Amrsc 1.5 kW 0.12 kW 1730 mm 770 mm 1460 mm 476 kg DIGITAL ANGLE READ OUT blade brush control panel swivel frame infinitely adjustable lowering with hydraulic cylinder hydraulic lifting of the saw frame quick lowering with automatic switchover to working speed using a sensor pin mech. Vice with quick clamping coolant equipment machine base chip collecting tray user manualin GERMAN or ENGLISH OPTIONS: Roller tables and band saw blades on request

Condition: used, Year of construction: 1992, functionality: unexamined, Technical Specifications Make and model: Bruderer BSTA 25 EL Nominal capacity: 250 kN, 25 tons Year of manufacture: 1992 Year of control upgrade: 2020 Max. number of strokes: 100/1425 Adjustable stroke: 13, 16, 19, 25, 32, 38 mm Table dimensions: 640 x 530 mm Passage between the supports: Longitudinal 640 mm; Lateral 220 mm. Fitted with roll feeder BBV 190/85 on right hand side. Max width of strip: 160 mm Feed length: variable up to 85 mm max Optional: Sound insulating cabin Oil pump. Heat exchange oil cooler. Front and rear safety guards. Fitted on 4 spring feet. Tedpfx Amjyktfteroc Slide/Ram adjustment: 51 mm Documentation included. Press weight cca. 5000 kg.

Condition: new, Year of construction: 2025, Hydraulic horizontal bending and straightening press - Fabrikat Zopf - Model T 800 - Multiprogramming of 99 programs each 16 steps - hydraulic pressure 80 to. - length of stroke 300 mm - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable - maximum bending high 300 mm - motorcapacity 7,5 KW - 400 V 50 hz 3 ph. - working height 940 mm - closed table - replaceable wear plate - weight 2100 kg - bending capacity: Todpfx Ajd A Nc Domroc flat material max. 300x32 mm at Vmax round tube 3/8" - 3" gas pipe

Condition: used, Year of construction: 1985, cutting diameter 1300 mm saw band length 11880 mm cutting width 1,6 mm main drive motor 11 kW table surface area 2300x1200 mm cutting range 1300x1300 mm total power requirement 16 KVA weight of the machine ca. 17,75 t Bandsaw filling machine The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Tjdpfx Amezfqhtjrec If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2007, cutting diameter 400 mm saw band length 4715 mm Tsdpjzfqh Hofx Amrjc cutting width 1,3 mm main drive motor 7,5 kW Roller conveyor length 4000 mm Roller conveyor width 700 mm roll diameter - bore 150 mm total power requirement 14 KVA weight of the machine ca. 7,5 t Bandsaw filling machine The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2007, cutting diameter 330 mm saw band length 4115 mm cutting width 0,9 mm main drive motor 3,7 kW Roller conveyor length 5000 mm Roller conveyor width 700 mm roll diameter - bore 150 mm total power requirement 13 KVA weight of the machine ca. 1,8 t Bandsaw filling machine The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Tedpfezfqhmsx Amroc We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2007, cutting diameter 330 mm saw band length 4115 mm cutting width 0,9 mm main drive motor 3,7 kW Roller conveyor length 5000 mm Roller conveyor width 700 mm roll diameter - bore 150 mm total power requirement 13 KVA weight of the machine ca. 1,8 t Bandsaw filling machine The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Tsdpfx Ajzfqh Tjmrsc We look forward to your visit. Your Markus Hirsch Team

Condition: like new (used), Year of construction: 2022, machine/vehicle number: DF0147, Pressure: 150 t Total power requirement: 20 kW Machine weight approx.: 11.5 t space requirement approx.: 8800 x 1800 x 2200 mm pressure setting infinitely variable via rotary control : 15-150 t cylinder diameter : 100 mm pressing speed (infinitely variable via joystick) : 0-9,9 mm/s servo motor : 2 kW cooling unit : 1 kW Oil tank (under press table): 350 l Oil cooling (electric): 1 kW (max) Profile straightening press 150 T with two pressure cylinders. Todpfofxygwex Amrjc The straightening machine is prepared for the particular type of material by interchangeable rounded spacer elements. The replacement of the 10 inserts is done manually by simply pushing them into the holding grooves. The scope of delivery includes basic equipment for one profile. The program for the respective profile is then called up on the monitor. The monitor shows the ideal line and, in addition, an ascending and descending millimeter scale with 0.5 mm lines. The profile to be straightened is now placed on the left side of the table, pushed against a holder and clamped with a quick-clamping device. Both the holder and the quick-clamping device are mounted on a clamping plate for quick adjustment. This clamping plate moves on a linear guide from left to right and vice versa. Transport is by a chain drive and a servo motor. The movement is triggered by a joystick on the control panel. After the profile has been clamped, the operator moves the clamping platen into the press using the joystick. The travel speed is up to 100 mm per second, but can be continuously adjusted down to 10 mm per second. To do this, it is sufficient to pull the lever of the control system slightly less. A high-resolution camera now shows the profile in the press. The operator sees exactly the deviation from the ideal line. Depending on the need, he now pushes or pulls the profile to the desired accuracy. He then continues to move slowly through the press, seeing in detail on the monitor whether the profile is now straight. Depending on the need, he can now move the profile forwards or backwards and readjust it. After the profile has been straightened, it moves out of the press on the right and can be removed. If desired, the clamping platen now moves back to the loading position on the left or it is now loaded from the right to save time. The press may only be operated under the following conditions: Perm. ambient temperature: 5-60 °C Permissible relative humidity: at 20°C - 90%, at 40°C - 50% Height of the installation site NN: + 1000 m Perm. fluctuations E-mains: +/- 10%.

Condition: new, Fastech Horizontal Bandsaw, Semi-Automatic BMSY 320 DGH Saw band dimensions: 4160x34x1.1 mm Band speed: 20 - 100 m/min, continuously variable Cutting capacity 0° rectangular: 450x320 mm, round 320mm Cutting capacity 30°: round 320 mm, square 320 mm, rectangular 410x320 mm Cutting capacity 45°: round 320 mm, square 320 mm, rectangular 330x320 mm Cutting capacity -30°: round 320 mm, square 320 mm, rectangular 420x320 mm Cutting capacity -45°: round 320 mm, square 320 mm, rectangular 340x320 mm Cutting capacity -60°: round 240 mm, square 220 mm, rectangular 230x220 mm Working height: 860 mm Coolant pump motor: 0.12 kW Hydraulic motor: 0.37 kW Motor: 2.2 kW Length: 2260 mm Width: 1160 mm Height: 1700 mm Weight: 1030 kg Double miter saw Continuously variable band speed Hydraulic vise High-performance gearbox Hydromechanical saw band tensioning Todeg Ekp Njpfx Amrec Saw band brush Digital display for the miter angle

Condition: used, Year of construction: 2017, Automatic cold press Manufacturer: CMB Type: PFR-CCL Year of manufacture: 2017 Technical data: Motorized loading table 3,500 x 1,600 mm for manual assembly of the plates and automatic loading into the press on the 1,600 mm side. Structure made of welded steel profiles. Devices for adjusting the working height to compensate for unevenness in the floor. Steel rollers. Foot switch. PRESS Tjdpfx Aezuzw Domroc Plate size: 5,500 x 1,600 mm Loading side: 1,700 mm Stroke: from top to bottom Opening: 450 mm Cold press The plates are made of steel sheet and attached to a steel frame structure. Maximum pressing force: 160 tons. Specific pressure (on 100% of the area): 1.82 kg/cm2 Specific pressure (on 80% of the area): 2.27 kg/cm2 Pressure cylinder: 12 x 80 mm Auxiliary cylinders: 6 x 50/30 mm Power supply: 400 Volt EU/50 Hz/3 PH. + G AUTOMATIC LOADING and UNLOADING of the plates on the lower plate, on the 3,500 mm side. The transport is carried out via a motorized MYLAR belt. The belt is activated by 2 rollers, one of which is located at the entrance and one at the exit of the press. The rollers are driven by a motor with a chain that slides on special guides. The Mylar belt rotates around the lower plate, which rests on special side supports. The belt rotates on 2 rollers, which are located at the entrance and exit of the press. The ends of the MYLAR belt are attached to special rods with devices for tensioning the MYLAR. The upper plate is covered with a Mylar film. The press plates consist of thick steel sheets that are welded to the frame structure. HYDRAULIC UNIT with pump, oil tank and valves for operating the pressure cylinders and auxiliary cylinders that move the upper plate. The hydraulic control unit is located in the upper part of the press to facilitate maintenance. CONTROL PANEL with buttons and switches. Pressure control manometer on the front of the press. UNLOADING MOTORIZED ROLLER TABLE 2,000 x 1,600 mm The unloading table is located at the exit of the press for manual unloading of the pressed plates. Exit side from the press: 1,600 mm. Note: The loading table of the press with the dimensions 3,500 x 1,600 and the unloading table with the dimensions 2,000 x 1,600 are shorter than the press table with the dimensions 5,500 x 1,600, as the press was installed in a line. Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Year of construction: 2003, condition: used, cutting capacity - round 300 mm dimensions of saw-band 3320 x 27 x 0,9 mm cutting capacity - flat 330 x 260 mm cutting capacity - square 260 mm Control evolution work height max. 870 mm 40 / 80 mt/min weight of the machine ca. 1050 kg Tjdpfx Aera Rrlemroc

Condition: as good as new (ex-display), Year of construction: 2024, tool height: 130 mm, pressing force: 12 t, bending force (max.): 12 t, Stierli bender 120HE horizontal press Horizontal bending machine, manual control with angle fine adjustment. Very universal, for bending flat steel, sheet, round steel, profiles, tubes angular or round, forming tools and easy fixing of own tools or special tools, + straightening as straightening press. Bending pressure 12 tons tool height 130 mm Stroke 0-170 mm stepless Tjdpjflc R Dsfx Amrec Bending capacity 130x12 mm S235 Straightening performance light straightening work Pipe bending 3/8"-11/2" Demonstration machine year 2024 incl. hand and foot pedal Machine as good as new

Condition: used, Year of construction: 2009, cutting diameter 360 mm saw band length 4870 x 41 x 1,3 mm cutting width 360 mm cutting speed 11 - 110 m/min 4,0 kW Tedpozyyyzjfx Amroc height of the workpiece 800 mm weight of the machine ca. 2,1 t dimensions of the machine ca. 2,3 x 1,9 x 2,2 m Automatic hydraulic band saw with - SIMATIC OP17 NC control - Single material feed 600 mm - Max. programmable length 6000 mm - Hydraulic saw blade tensioning (36–40 bar) - Motorized chip conveyor - Emergency stop device - infeed roller conveyor 4m

Condition: used, Year of construction: 2018, Channel baling press Avermann AVOS 1810 BRK-90/100, year of manufacture 2018, with cross-tying Technical data: Manufacturer: Avermann Type: AVOS 1810 BRK-90/100 Year of manufacture: 2018 Pressing force: 100 t Drive power: 2 x 45 kW Dimensions of feed hopper: 1,800 x 1,000 mm Throughput at 35 kg/m³: 15.0 t/h Throughput at 60 kg/m³: 20.0 t/h Throughput at 100 kg/m³: 29.0 t/h Bale dimensions: 1,100 x 750 mm (W x H), length variable Bale weight: up to 650 kg, material-dependent Tying: 5-fold vertical, 3-fold horizontal, automatic Machine dimensions: approx. 11,200 x 2,400 x 3,900 mm (L x W x H) Tjdpfez H I Dxjx Amrsc Machine weight: approx. 29,000 kg Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale and may be withdrawn at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without warranty. Our payment terms are 100% prepayment.

Condition: new, Model Name Shark 332-1 SXI evo Todpfx Aogvkafemrjc

Condition: used, Year of construction: 1986, cutting diameter 460 mm saw band length 5334 mm cutting width 1,3 mm cutting range - square - 320 x 320 mm cutting range - flat - 500 x 320 mm control minipos 807 cutting speed 16 - 80 m/min dimensions of saw-band 5334 x 41 x 1,3 mm Tsdpotqqrfjfx Amroc feed length 580 mm feed length: multiple 5800 mm total power requirement 8 kW weight of the machine ca. 3,5 t dimensions of machine L x W x H 2,7 x 2,95 x 2,15 m Accessories: roller track 4150 mm length, roller track 2150 mm length, bundle clamping device, chip conveyor, coolant

Condition: new, neu ca. 4 Monate ab Auftragse Türkei 46700 € 891.97 € Doppelsäulenführung 8200x41x1,3 mm 20-100 m/min 810 mm 750 mm 910x750 mm rund 600 mm, quadrat 600 rund 360 mm, quadrat 360 Tsdpfoynm Rksx Amrec 725 mm 4 kW 0.12 kW 4020 mm 1600 mm 2450 mm 3970 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment hydraulic uplift of sawing frame user manual in GERMAN or ENGLISH OPTIONS: Hydraulic vertical clamping Micro cooling unit Laser liner

Condition: new, Fastech Horizontal Double Miter Bandsaw, Semi-Automatic BMSY 440 DGH Round cutting capacity: mm 440 Flat cutting capacity: mm 610 x 440 Square cutting capacity: mm 440 Tedpfx Amjhpil Ejrsc +30° Round cutting capacity: mm 400 +30° Flat cutting capacity: mm 500 x 440 +30° Square cutting capacity: mm 440 +45° Round cutting capacity: mm 440 +45° Flat cutting capacity: mm 410 x 440 +45° Square cutting capacity: mm 410 +60° Round cutting capacity: mm 320 +60° Flat cutting capacity: mm 250 x 440 +60° Square cutting capacity: mm 250 -30° Round cutting capacity: mm 440 -30° Flat cutting capacity: mm 500 x 440 -30° Square cutting capacity: mm 410 -45° Round cutting capacity: mm 410 -45° Flat cutting capacity: mm 410 x 440 -45° Square cutting capacity: mm 410 -60° Round cutting capacity: mm 320 -60° Flat cutting capacity: mm 285 x 440 -60° Square cutting capacity: mm 285 Motor power, main drive: kW 3 Hydraulic pump power: kW 0.55 Motor power, coolant pump: kW 0.12 Band speed: continuously variable m/min 20 - 100 Saw band dimensions: mm 5200 x 34 x 1.1 Height of the work surface: mm 860 Weight: kg 1540 Length / Depth / Height: mm 2800 / 1210 / 1870 Double miter saw Continuously variable band speed Hydraulic clamping device, sensitive cutting pressure adjustment High-performance gearbox Hydromechanical saw band tensioning Saw band brush Digital display for the miter angle

Condition: new, Year of construction: 2026, functionality: fully functional, Cutting capacity 90° (rectangular) 460 x 250 mm Cutting capacity 90° (round) 330 mm Cutting capacity 60° (rectangular) 205 x 200 mm Cutting capacity 60° (round) 205 mm Cutting capacity 45° (rectangular) 305 x 250 mm Cutting capacity 45° (round) 305 mm Adjustable band speed 48/96 m/min (60 Hz) Saw band dimensions 27 x 0.9 x 3960 mm Tjdpfx Aoz Drarsmrsc Power consumption 1.5 / 2.2 kW Machine weight 900 / 1060 kg (net/gross) Machine dimensions LxWxH = 2310 x 1070 x 1630 mm

Condition: used, Year of construction: 1996, cutting diameter 15 - 300 mm saw band length 4640 mm cutting width 1,3 mm cutting range - square - 300 x 300 mm feed length 600 mm feed length: multiple 5400 mm dimensions of saw-band 4640 x 41 x 1,3 mm cutting speed 19 - 130 m/min min. cut-off length 10 mm Tjdpszwxxksfx Amrec height of material-table 700 mm total power requirement 7 kW weight of the machine ca. 2,7 t dimensions of machine L x W x H 2,35 x 2,34 x 1,95 m Accessories: chip conveyor, DRO for cutting length, coolant

Condition: used, Year of construction: 1998, machine/vehicle number: 106026, Horizontal stack delivery with pressing and marking device Heidelberg SBP 46.D + MKE.DYear 1998 - Serial-No. 106026/98-263536 Sheet size min. (width × length) 120 × 100mm Sheet size max. (width × length) 460 × 300mm Product thickness max. 4mm Pile length 800mm Pressing force 8,000 N Infeed height 360-960mm Online-Video-Inspection by Skype-Video Tjdjh Axhdjpfx Amrec We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1987, pressure 40 t no. of strokes 500 Hub/min Tjdpfx Asvu E Iwjmrec total power requirement 5,5 kW

Condition: used, Year of construction: 2001, functionality: fully functional, The Schaal SEP 80 is a 80-ton eccentric press designed for precision stamping and forming. Its Unidor electronic control system ensures repeatable stroke accuracy and fast setup, while the integrated tool safety device protects dies from damage caused by misfeeds or incorrect part positioning — reducing downtime and tooling costs. The machine features a rigid double-column O-frame in vibration-damping cast iron, 6-point play-free roller ram guidance, and a flywheel drive with pneumatic clutch/brake combination. It comes equipped with a gripper feeding device SZV 302 feed unit for automated strip feeding. Pressing force: 800 kN (80 tons) Strokes per minute: 60 – 320 min⁻¹ Ram stroke (adjustable): 8 – 80 mm Tsdszhw Huepfx Amrec Ram adjustment: 80 mm Ram surface: 700 × 500 mm Table size (clamping plate): 830 × 700 mm Clamping plate thickness: 80 mm Table opening: 500 × 200 mm Strip feed clearance: 120 ± 40 mm Feed unit: Schaal SZV 3 Strip width: 10 - 270 mm Thickness: 0 – 4 mm Drive power: 21.5 kW Weight: 8,000 kg Footprint: 1,500 × 2,000 mm, height: 2,885 mm

Condition: new, Year of construction: 2023, Horizontal bending machine AH 40 - ZOPF - with semi-automatic control - hydraulic pressure 40 to. - length of stroke - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable - maximum bending high 250 mm - motorcapacity 3,0 KW - 400 V 50 hz 3 ph. - working height 900 mm - closed table - replaceable wear plate - weight 950 kg Todpfx Aoqvm Ukemroc - bending capacity: flat material max. 150x22 mm round tube up to 60 mm

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, pressing force: 15 t, bale width: 700 mm, bale height: 700 mm, bale weight: 220 kg, input voltage: 400 V, power: 4 kW (5.44 HP), empty load weight: 2,700 kg, Manufacturer: Borg Baling Company Type: S-15KK Year of production: 2002 3x400V, 4kW, 14.5A Tsdpfeh Dy Rfjx Amrsc Compression force: 15t Net weight: 2.7 t Bale max. sizes 700x700x1000 mm weight of a bale: ca 120 – 220kg Wide Range of Used Machinery, Industrial Equipment