Used Winter Service Equipment / Snow Plow for sale (50,990)

Condition: ready for operation (used), functionality: fully functional, mileage: 1,440,000 km, first registration: 11/2026, fuel type: diesel, axle configuration: 4x4, next inspection (TÜV): 08/2026, fuel: diesel, gearing type: mechanical, Year of construction: 2011, Equipment: ABS, air conditioning, parking heater, truck registration, Special equipment: Pedpsza Tc Rsfx Af Ssgt Trailer brake 2 - line, trailer coupling: towing coupling, trailer coupling: G 145, trailer socket 24V / 15-pole, audio system: CD radio (Bluetooth), differential lock front axle, cab variant: S (short with extended rear wall), electric window lifts, heated windshield, graphic info display with eco-meter, air dryer 1 chamber, heated, engine PTO front with tandem pump, parameterizable special module, reversing warning system acoustic (warning signal outside), rear window, seats in cab: driver's seat comfort suspension seat, sun visor outside, stabilizer rear axle reinforced (for extremely high load), stabilizer front axle reinforced, steel rims 11.00x20.0. Additional equipment: Emission standard EURO 5, axle configuration: 4x4, exterior mirrors electrically adjustable and heated, battery 115 Ah, cockpit distributor, sunroof (steel), differential lock rear axle, cab: tilting mechanism hydraulic, cab: S (short), suspension: leaf / leaf, generator 80 A, transmission 6-speed - type: G 60-6, urea tank (AdBlue): 25 liters, rear axle H 4, crown wheel 410, hydraulic steering gear LS 6 / LS 8, interior filter: pollen filter, body / superstructure: tipper, fuel tank: 125 liters, model update Atego 2, engine 6.4 liters - 175 kW diesel (OM 906 LA), engine start / stop system, engine brake with constant throttle, auxiliary drive MB 2C, auxiliary drive MB 60-2C with MPA, wheelbase 3260 mm, SCR system (AdBlue technology), side impact protection, seats in cab: passenger single seat, fixed, drum brake front and rear axle, underrun protection rear fixed, transfer case - VG 550 - 3W, immobilizer, permissible total weight 13.50 t.

Condition: good (used), Year of construction: 1987, Wedge snow plow, snow plug, dozer blade, dozer blade, snow blade -Plow: hydraulically adjustable Pedpfxecitlho Af Segt -Working width: max. 3200 mm -with: plastic scraper condition see photos -Sign height: approx. 1100 mm -A conversion to a three-point attachment for tractors or drive-in pockets for forklifts and wheel loaders is possible for an additional charge -Transport dimensions: 3300/1400/H1570 mm -Weight: 905 kg

Condition: new, functionality: fully functional, This listing is for informational purposes only and does not constitute a legally binding offer. We offer a robust snow plow for the Heracles H130 with a working width of 1.2 m. Ideal for quickly and efficiently clearing snow from streets, yards, or parking lots. Working width: 1.2 m Suitable for Heracles H130 Ready for immediate use, sturdy construction Pgodpfx Ajyk S Imof Sot Perfect for companies or municipalities seeking reliable snow removal equipment. Inspection and collection possible. PRICE: €390 net €464 gross

Condition: good (used), Year of construction: 2019, functionality: fully functional, For sale is a high-quality, all-in-one winter combination machine, type 5K 310-2600, manufactured in 2019. This machine combines several processing units in a compact design and is ideal for carpentry workshops, joineries, and demanding woodworking applications. The technical data has been taken from the nameplate. Technical data Manufacturer: Winter Holztechnik GmbH Type: 5K 310-2600 Year of manufacture: 2019 Machine no.: 201904001 Weight: approx. 575 kg Voltage: 400 V / 3 phases / 50 Hz Jointer and Thicknesser Motor power: 2.8 kW Planing width: 310 mm Knife shaft Ø: 70 mm 3 knives Knife shaft speed: 4,800 rpm Removal rate (jointing): max. 4 mm Removal rate (thicknessing): 2 mm Feed speed: 6 m/min Jointing table: 1,380 × 310 mm Thicknessing table: 540 × 306 mm Max. feed height: 235 mm Sliding Table Circular Saw Motor power: 3.8 kW Saw blade Ø: 315 mm Main saw blade speed: 4,500 rpm Cutting width with parallel fence: up to 860 mm Pgodpfxezfilwe Af Sjt Sliding table: approx. 1,260 mm Blade tilt: 90°–45° Spindle Moulder Motor power: 2.8 kW Spindle diameter: 30 mm Working height: 100 mm Speeds: 1,800 / 3,000 / 6,000 / 9,000 rpm Mortising Machine Drill chuck: 16 mm Drill stroke: 140 mm Table size: 500 × 210 mm Max. workpiece length: 1,250 mm Equipment Spindle Moulder Jointer and Thicknesser Mortising Machine Sliding table Angle and parallel fence Compact multi-function machine for space-saving work Transportation possible for an extra charge! Note The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: like new (used), Year of construction: 2014, operating hours: 10 h, functionality: fully functional, Fiber optic optical inspection system with various endoscopes, as shown in the attached photos. Pgedpfx Afsz Dicqs Sjt

Condition: new, Length: 3000mm from stock Podpfxjrcb A Rs Af Sjgt

Condition: new, Layout: Fork adjuster Attachment suited for: Lifting equipment Pgjdpfx Afsphq Dto Sot Selling price: € 1.475, US$ 1.553 GALEN Snow Plow Box has a unique design that attaches easily to forklift forks. Since the forklift fork can be adjusted, it is compatible with forklifts of all brands, models and tonnages. For detailed information please contact us

Condition: used, Year of construction: 2018, machine/vehicle number: SCIAC44, Used Rinsing Machine Aesse Service LINE6 year 2018 This machine therefore provides a reliable and robust option for industrial bottling plants. A Esse Service manufactured this model in 2018 to ensure high performance with optimal energy efficiency while maintaining the quality of rinsing processes. Although previously used, the machine has seen very limited operation, which has preserved it in excellent condition. Now in storage, the LINE6 model is designed to handle glass containers with a standard 0.75 L format and operates at a speed of 900 bottles per hour (BPH). Technical Specifications of the Rinsing Machine Aesse Service The Used Rinsing Machine Aesse Service LINE6 year 2018 delivers stable production with a power consumption of 2 kW. In addition, a high voltage (A.T.) of 400 V alternating current ±10% with neutral and ground powers the machine, while a low voltage (B.T.) of 24 V direct current ±10% supplies control circuits. Therefore, the machine supports an operating frequency from 50 to 60 Hz, which adapts well to different industrial standards. Pneumatic System The Machine requires a pneumatic supply of 6 bar and consumes 500 liters per minute to operate effectively. Moreover, this stable airflow supports precise rinsing cycles, which is crucial in bottling lines where flow regularity directly impacts product quality. Furthermore, the airflow consistency ensures reliable performance over time. Dimensions and Weight The compact design of the Used Rinsing Machine Aesse Service LINE6 year 2018 enables easy integration into work environments with limited space. For this reason, the machine measures 1300 x 1300 x 1600 mm (L x W x H), with a dry weight—meaning without liquids or filled conduits—between 300 and 500 kg. Consequently, the moderate weight allows for easy transport and installation, making the LINE6 model practical and versatile for various industrial applications. Container Capacity Pgsdpfx Afovhcplj Sst The Used Rinsing Machine Aesse Service LINE6 year 2018 handles bottles with capacities ranging from a minimum of 0.5 liters to a maximum of 1.5 liters, thereby providing versatile production capabilities. This range, in particular, accommodates rinsing needs for various standard formats used in the beverage industry. Bottle Diameter and Height Additionally, the machine accepts bottles with diameters from 55 mm to 115 mm. Consequently, this flexibility enables it to handle different types of glass containers securely during the rinsing cycle. Also, the machine supports bottle heights between 160 mm and 345 mm, which benefits companies by allowing them to use different formats without frequently changing equipment. Performance and Reliability The rinser provides long-lasting performance thanks to its robust construction and advanced engineering. Moreover, its design reduces routine maintenance, thus ensuring operational continuity essential for industrial bottling lines. Given that this machine has seen minimal prior usage, it adds to its reliability. With a speed of 900 BPH, the LINE6 model certainly meets the needs of high-production plants. Conclusion of the Rinsing Machine Aesse Service In conclusion, the Used Rinsing Machine Aesse Service LINE6 year 2018 offers an efficient and versatile solution for handling glass bottles of various sizes and capacities. Its compact design and high-quality construction, for in...

Condition: used, Year of construction: 2022, total width: 1,800 mm, total height: 1,900 mm, total length: 1,800 mm, overall weight: 3,000 kg, Hydraulic briquette press Manufacturer: Winter Type: BP 450 Year of manufacture according to nameplate: 2022 Technical data: Capacity max. 450 kg/h Motor 35 kW / 400 V, 50 Hz Chip compression min. 1,000 kg/cm² max. 1,500 kg/cm³ Wood moisture < 14 % Briquette dimensions: Length 150 mm, Width 60 mm Dimensions L x W x H: 1,800 x 1,800 x 1,900 mm Weight 3,000 kg Purchase price net € plus applicable VAT. VAT will be shown separately on our invoice. Pgsdpfezxlznox Af Sot Subject to changes, errors and prior sale. Sale is made without warranty and guarantee, and only to business customers. Inquiries will be processed from Monday to Friday between 8 a.m. and 4 p.m.

Condition: used, functionality: unexamined, type of input current: three-phase, total height: 3,000 mm, total length: 3,000 mm, input voltage: 380 V, type of cooling: water, welding current at 60% duty cycle: 1,000 A, welding current at 100% duty cycle: 800 A, welding current (min.): 250 A, welding current (max.): 1,250 A, Used ESAB submerged arc welding (SAW) system for sale, manufactured by ESAB AB / ESAB Welding Equipment AB, Sweden. The system is designed for mechanized submerged arc welding (SAW), including tandem welding AC/DC. It is suitable for welding long, straight seams, beams, profiles, sheet metal structures, cylindrical products, vessels, tanks, and heavy welded structures. Manufacturer: ESAB AB / ESAB Welding Equipment AB Country: Sweden Process: SAW – Submerged Arc Welding Type: Mechanized welding system / tandem welding system Inscription: UP Tandemschweißen Welding: DC + AC with ESAB power sources Welding head: Available, with flux hopper Work beam / chassis: Long ESAB welding beam / tractor Condition: Dismantled / stored, available for inspection Welding power sources ESAB TAE 800 Parameter Data Model ESAB TAE 800 Range 300 A / 28 V – 800 A / 44 V 100% duty cycle 800 A / 44 V 60% duty cycle 1000 A / 44 V Power supply 400 / 415 / 460 / 500 V, 50 Hz Protection IP23 ESAB LAE 1250 Parameter Data Model ESAB LAE 1250 Type Welding rectifier Range 250 A / 24 V – 1250 A / 44 V 100% duty cycle 1250 A / 44 V Power supply 220 / 380 / 415 / 500 V, 50 Hz Protection IP22 Pedpfx Afjzimbko Ssgt Weight 490 kg Data from the tandem welding plate Mode Current Voltage Direct current / DC 520 – 580 A 28 – 30 V Alternating current / AC 550 – 620 A 34 – 36 V Travel speed: 680 – 800 mm/min. Included components: long ESAB welding beam / chassis; welding head; flux hopper; cables and hoses; control boxes; ESAB TAE 800; ESAB LAE 1250; submerged arc welding equipment. Condition: The system is used and is currently dismantled / stored out of active operation. Visible signs of use, dust, dirt, and storage are present. It is sold in its current condition, with the equipment shown in the pictures. On-site inspection and technical verification by the buyer are recommended before purchase.

Condition: like new (used), Year of construction: 2015, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 5067, total width: 450 mm, total length: 500 mm, input voltage: 220 V, total height: 400 mm, cutting width (max.): 108 mm, number of blades: 2, table height: 600 mm, Equipment: CE marking, Hot & Cold Automatic Strip Cutting Machine Pgsdpfozut Axjx Af Sot It can cut elastic, webbing (up to ¼" thick), ribbons, belt loops, hook and loop fasteners, nylon cords, leather, safety belts, rubber, and vinyl. FEEDING SPEED – adjustable up to 13 inches per second. • CUTTING LENGTH – approximately 400 ft. • CUTTING WIDTH – 4 inches. • TOLERANCE – 0.05% of the total cut length. • QUANTITY – up to 99,999 pieces. • COUNTER – pre-set up to 99,999. • SAFETY – knife cover sensor – automatic stop when the roll ends. • AUTO – feed/reverse.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Label dispensing module for print integration, print module 4L300 thermal transfer printer, belt conveyor, see photos for details. Pgjdpfxezn N Nno Af Sot

Condition: not inspected (used), functionality: unexamined, Hartridge Diesel Injector Service Equipment – Injectomatic One + Injector Reconditioning Machine Manufacturer: Leslie Hartridge Ltd Country of Manufacture: England Machines Included 1. Hartridge Injectomatic One – Nozzle Reseating Machine 2. Hartridge Diesel Injector Nozzle Reconditioning / Grinding Machine _____ Description Complete diesel injector service equipment setup manufactured by Hartridge, a globally respected manufacturer of diesel fuel injection testing and service equipment. This package includes the Hartridge Injectomatic One nozzle reseating machine along with a Hartridge injector nozzle reconditioning / grinding machine, used for restoring and servicing diesel injectors. These machines were widely used in professional diesel workshops for injector maintenance and refurbishment. _____ Hartridge Injectomatic One • Diesel injector nozzle reseating machine • Used to restore worn injector sealing surfaces • Precision alignment and controlled reseating process • Timer control and emergency stop • Industrial workshop equipment _____ Hartridge Injector Reconditioning Machine • Precision injector nozzle grinding / lapping machine • Used for injector repair and refurbishment • Heavy-duty Hartridge engineering • Includes fixtures and tooling shown in photos • Ideal for diesel injector service workshops _____ Applications Pedpfx Aeyx Sg Hsf Segt • Diesel fuel injection service centers • Agricultural machinery repair workshops • Truck and heavy equipment maintenance • Diesel engine specialists • Technical training facilities

Condition: good (used), Year of construction: 2014, 2x carton packaging machines, carton erectors, B&E Equipment / I-Pak – used: Price per unit, ex works: only €9,950 (net), with self-dismantling! Manufacturer: B&E Equipment / I-Pak Type: BA18H Year of manufacture: 2014 Serial numbers: 14/0558 and 14/0557 Pedpfx Aozbyn Nsf Sjgt Each unit includes 1x Nordson ProBlue 4 hot melt adhesive applicator with 4-liter hot melt adhesive Weight: approx. 1,500 kg 400V, 8kW, 15A, 3 phases Condition: good Available: from approximately Q4/2026 Location: Hamburg A video of the machine is available!

Condition: used, - Cooking chamber dimensions: 1200x2000 mm - Refurbished equipment: The equipment is prepared upon order, collection and return deadlines are agreed at that time (please ask for the price after refurbishment). Pgedpewxmn Ssfx Af Sot

Condition: used, Year of construction: 2024, machine/vehicle number: 8109, functionality: unexamined, power: 3.5 kW (4.76 HP), input voltage: 400 V, cutting height (max.): 4,100 mm, cutting width (max.): 2,200 mm, rotational speed (max.): 5,800 rpm, total length: 5,000 mm, total width: 1,150 mm, total height: 2,980 mm, overall weight: 675 kg, Digital display for horizontal and vertical cuts, scoring unit, automatically adjusting slat bed, plate transport rollers, continuous small-part support, strip stop. The condition can be seen in the attached expert report. Pjdpszvngbjfx Af Segt

Condition: used, Year of construction: 2006, working width: 520 mm, roll width: 520 mm, roll diameter: 1,000 mm, Equipment: documentation/manual, Video below We offer this used ETI Converting Equipment Cohesio ST 520 coater, die cutter, UV silicone coating, flexographic printing press 1 colour, , 11 magnetic cilinders, year of construction 2006. multifunctional equipment that allows self-adhesive materials and labels. linerless 1 flexo 2 hotmelt coating guns (roatating bar, lips + ‘Waterwall”) 3 unwinders Web width of 520 mm E + L webguides at the infeed and between hotmelt and UV printing unit 2 Corona treatments for two unwiders 2 cleaners UV Curing on 1 Flexo units (UV-Ray), which chilling rolls 2 die cutting units Chiller Working hours 9000 Year of production 2006 more information on request Pgjdeyalqyjpfx Af Set If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2018, REF: MM6441 Pgjdpfx Afsza T Slj Sjt Wenzhou Jiangbo Dairy Equipment Factory Co. Ltd (Chinese) 5000L stainless-steel tank with agitator. Manufacturer - Wenzhou Jiangbo Dairy Equipment Factory Co., Ltd. Model - DCG. Date of manufacture - 2018. Speed - 36 r/min. Electrical requirements – 415 V / 50 hz / 3 phase.

Condition: good (used), Year of construction: 2014, Cardboard packaging machine, carton erector, B&E Equipment / I-Pak – used: Price ex works: only €9,950 (net), if disassembled by the buyer! Manufacturer: B&E Equipment / I-Pak Type: BA20-2 Year of manufacture: 2014 Serial number: 14/0559 Pedpfx Aezbynpef Sjgt Each unit comes with 1x Nordson ProBlue 4 hot melt adhesive applicator and 4 liters of hot melt adhesive. Weight: approx. 1,250 kg 400V, 7kW, 16A, 3 phases Condition: good Available: from approximately Q4/2026 Location: Hamburg A video of the machine is available!

Condition: excellent (used), Catalog number 6393 TECHNICAL DATA - max. width of the workpiece 200mm - max. height of the workpiece 150mm - number of spindles 4: 1) horizontal, lower 200mm, 5.5kW 2) vertical, right 150mm, 4kW 3) vertical, left 150mm, 4kW 4) horizontal, upper 200mm, 5.5kW - all heads adjustable up/down, left/right - spindle diameter 40mm Pgjdozu R N Njpfx Af Sst - spindle speed 6000 rpm From above: - 6 feeding rollers, toothed, including 2 double rollers - 1 feeding roller, rubber From below: - 1 feeding roller, toothed, twisted in the lower table - 3 side pressure rollers - 1 discharge roller, metal, smooth - all rollers are pneumatically pressed - length of the feeding table 2130mm - table adjustable up/down - central lubrication - electric setting of planing thickness - lifting motor 1.1kW - stepless feed speed adjustment on a frequency inverter - feed motor 3kW - feed on Cardan shafts - enclosed in a cabinet - diameter of the dust extraction nozzle 4x130mm - dimensions L/W/H 3550x1750x1800mm - weight approximately 3000kg ADVANTAGES – with 4 heads – ideal for wet and dry wood – DTR documentation – used machine, very good condition Net price: 49900 PLN Net price: 11605 EUR Net price calculated according to the exchange rate of 4.30 PLN/EUR (the price may change in case of larger exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7219 TECHNICAL DATA - max. width of workpiece: 200mm - max. height of workpiece: 150mm Number of spindles: 4 1) horizontal lower spindle: 200mm, 5.5kW 2) vertical right spindle: 150mm, 4kW 3) vertical left spindle: 150mm, 4kW 4) horizontal upper spindle: 200mm, 5.5kW Podezu R Rmopfx Af Sogt - all heads adjustable up/down, left/right - spindle diameter: 40mm - spindle speed: 6000 rpm Top: - 6 infeed rollers (toothed), including 2 double rollers - 1 outfeed roller (rubber, double) Bottom: - 1 infeed roller (toothed, drive, adjustable in the lower bed) - 3 side pressure rollers - 1 outfeed roller (metal, smooth) - all rollers pneumatically pressed - length of infeed bed: 2130mm - bed adjustable up/down - central lubrication - electric adjustment of planing thickness - lifting motor: 1.1kW - stepless feed speed adjustment - feed motor: 3kW - feed via Cardan shafts - enclosed in a cabinet - diameter of dust extraction port: 4x130mm - dimensions (L/W/H): 3650x1750x1800mm - weight: approx. 3000kg ADVANTAGES - with 4 heads - ideal for wet and dry wood - DTR documentation - used machine, very good condition Net price: 52900 PLN Net price: 12302 EUR Net price calculated according to the exchange rate of 4.30 PLN/EUR (prices may change in the event of significant exchange rate fluctuations)

Condition: good (used), 1 x Mono doughnut fryer. model FG059-B02 Psdpfxoy S Td He Af Ssgt

Condition: used, Year of construction: 2017, Four-sided planer Manufacturer: WINTER Holztechnik Type: Timbermax 5-23 Year of manufacture: 2017 Technical data - Number of spindles: 5 - Processing range: 20-230 x 8-160 mm - Feed rate: 6 - 36 m/min - Suitable for processing wet wood Pjdpszy Nx Hefx Af Sjgt - Weight: approx. 3,800 kg - CE marked Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: used, Year of construction: 2018, cutting width 300 mm Cutting height 10-120 mm Chain width 300 Pjdey Ehzmopfx Af Ssgt Motor output 22 kW

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, Our 400 Ton/Hour Capacity Stationary Crushing and Screening Plant consists of 40 m³ vibrating feed bunker, wobbler feeder, CLK-110 jaw crusher, impact crusher, tunnel systems, stock and return belts, stock bunkers, control cabinet and automation system. Pgedpfx Aezvxlnsf Sjt The products transferred to the feed bunker are separated from dirt and mud in the first stage of the double-stage wobbler feeder and bypassed by the bypass belt conveyor In the second stage of the wobbler feeder, the products that are suitable for the jaw crusher are sent to the stock area with the transfer belt. The jaw crusher, with a maximum feed of 800 mm, crushes the products and sends them to the fist vibrating screen. In the first vibrating screen, the products are separated in 0-40 mm, 40-90 mm sizes and sent to the stock area. Products above 90 mm size are transferred to the secondary crushing and screening unıt. The products transferred to the tunnel system are sent to the 12-13 S impact crusher. The products crushed in the impact crusher are separated in different sizes by vibrating screen and sent to the stock area. The products stored in the stock area are transferred to the pan feeder by passing through the tunnel system according to the need. The vibrating pan feeder transfers the products to the stock bunkers with the transfer belt conveyor All equipment of the crushing &screening plant is controlled from 3 different automation panels.