Used Wet Whetstone for sale (848)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Superheated water boiler at 152°C, 1 Gcal/h, automatic feed, year of manufacture 2014 – manufacturer Sceat Italia - Heat output: 1,000,000 kcal/h - Pressure: 4 bar - Superheated water temperature: 152°C - Equipped with control thermostat, safety thermostat, thermometer - Working pressure: 4 atm - Fuel: wood waste, sawdust - Flue gas evacuation system: cyclone, forced draft fan, connection ducting - Furnace: lined with high alumina refractory bricks – prepared for wet materials from processing. Special refractory bricks laid with high alumina content cement, suitable for high humidity – optimized for the combustion of sawdust from log cutting Flue gas extraction system - Belt-driven fan - Multicyclone separator - Connecting ducts: boiler-multicyclone, multicyclone-fan, fan-chimney Ljdew Ewafopfx Ab Aohn - Chimney Included accessories - 2 safety valves - Cast iron discharge valve - Operating thermostat - Safety thermostat - Thermometer - Safety pressure switch - Pressure switch guard - Manometer with 3-way valve - Alfa 10 diameter 50 discharge valve Flue gas removal system - Cyclone for collecting solid combustion particles before flue gases are released into the atmosphere - Smoke extractor/fan to improve combustion by increasing draft in the boiler, essential if a smoke treatment system is present or when significant flow losses occur - Painted carbon steel alloy connection ducts between boiler and multicyclone, and between multicyclone and fan - Electrical panel serving the feed electropump, static level, pressure switches, minimum level probe for the smoke extractor fan, and all devices serving the generator - Chimney made of carbon steel

Condition: new, power: 140 kW (190.35 HP), fuel type: diesel, color: grey, gearing type: automatic, number of seats: 9, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Sprinter 319 Lord COMFORT VIP Lhedpfs Ad U Dyox Ab Aon In-stock vehicle, immediately available. Equipped with COC (Certificate of Conformity) for the base vehicle and Stage 2 conversion, making it registrable in all European countries. Conversion details: - Electric exterior sliding door - 7 reclining sleeping seats, 540 mm wide (extra wide) with armrests on the left and right, including carbon fiber trim - Dos a Dos / club table for 4 passengers - Side panels upholstered with synthetic leather (no exposed metal in the interior) - Webasto 10 kW air conditioning system with ceiling vents on the left and right in the passenger compartment - Service sets at each seat row with reading light, fresh air vent, and speakers - USB ports at each seat row - Multi-stage night lighting - Glass roof / panoramic roof with manual sunblind - Double glazing, VIP Black, in the original opening - Curtains on the windows - Convector heater in the passenger compartment, thermostat controlled - Storage shelf behind the last seat row - Flat passenger floor by Gerflor in wood-look - All exterior parts painted in vehicle color - Refrigerator between driver and passenger seat -... further options, especially custom orders, upon request. Special equipment: Driving Assistance Package, Extended automatic restart, Route-based speed adjustment, Tachograph operation at the front under the headliner, Suspension: Stabilization Level I, Rear lights partially LED, Folding cover for storage compartment, Fuel tank: Main tank 71 L, Charging Package Dashboard (USB ports and 12V socket additionally), Heated steering wheel, Alloy wheels 6.5x16 (6-spoke), Metallic paint, Parking Package with 360° camera, Interior rearview mirror, Windshield wiper system (Wet Wiper System), Mud flaps rear, Mud flaps front, Seats in driver's cab: Adjustable passenger seat, Seats in driver's cab: Heated driver's seat, Seats in driver's cab: Comfort driver's seat, Seats in driver's cab: Driver's seat with lumbar support, Reinforced front axle, Electrical pre-wiring, Parameterizable special module, Pre-wiring for tachograph, Auxiliary heater (air) electric, Auxiliary heater (hot water) Additional equipment: 3rd brake light, Storage compartment above the windshield, Storage compartment below the dashboard on the passenger side, Towing eye rear, Adaptive brake light, Airbag passenger side, Airbag driver side, Acoustic package, Trailer coupling: Electrical system for trailer socket, Exterior mirrors elect. foldable, Exterior mirrors elect. adjustable and heated, both, Exterior temperature gauge, DAB tuner (digital radio reception), Ceiling light in cargo area with door contact switch, Automatic activation for headlights, Entry handle on rear pillar, rear right, Entry handle for sliding door on cargo area partition, Driving assistance system: Breakdown management, Generator 250 A, Noise reduction exterior, Body / structure: Box high-roof standard, Instrument cluster with color display, Communication module (LTE) for digital services, Steering wheel (steering column mech. adjustable), Steering wheel with multifunction, M1 approval, Marker lights side, Mercedes-Benz emergency call system, Engine 2.0 L - 140 kW CDI CAT, Multimedia system MBUX (touchscreen 10.25"), Pro, Wheelbase 3665 mm, Low emission according to emission standard Euro VI, Sliding door cargo / passenger compartment right, Seat belt system with warning system (passenger side), Seat belt system with warning system (driver side), Seat cover / upholstery: Syntheti

Condition: new, power: 125 kW (169.95 HP), fuel type: diesel, color: white, gearing type: automatic, number of seats: 9, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Sprinter Lord COMFORT Minibus Base vehicles are available in multiple units, allowing for immediate start of the conversion process. Comes with COC (Certificate of Conformity) for the base vehicle and Stage 2 conversion, making it registrable in all European countries. Conversion details: - Electric exterior sliding door - 21 + 1 passenger seats / reclining seats adjustable backward, except for the last row with armrests on the aisle side - Side wall paneling/upholstery (no bare metal in the interior) - Webasto 12 kW air conditioning system with air vents on the left and right in the passenger compartment - Luggage compartment for light luggage Ledo Ad U Hhopfx Ab Ajhn - USB ports at each row of seats - Multi-stage night lighting - Double glazing, VIP Black, in the original window frame - Curtains on the windows - Convector heater in the passenger compartment, thermostat controlled - Flat passenger floor made of Gerflor in a wood-look finish -... further options, especially custom orders, available upon request. Special equipment: Driving Assistance Package, Extended automatic restart, Route-based speed adjustment, Tachograph operation at the front under the headliner, Suspension: Stabilization Level I, Rear lights partially LED, Folding cover for storage compartment, Fuel tank: Main tank 93 L, Charging package dashboard (USB ports and 12V socket in addition), Parking package with camera, Interior rearview mirror, Windshield wiper system (Wet Wiper System), Mud flaps rear, Mud flaps front, Seats in the driver's cab: Driver's seat heated, Seats in the driver's cab: Driver's seat suspension seat, Seats in the driver's cab: Driver's seat with lumbar support, Reinforced front axle, Pre-wiring for electrical systems, Parameterizable special module, Auxiliary heater (hot water) Additional equipment: 3rd brake light, Storage compartment above the windshield, Storage compartment below the dashboard on the passenger side, Towing eye rear, Adaptive brake light, Airbag passenger side, Airbag driver side, Acoustic package, Exterior mirrors electrically foldable, Exterior mirrors electrically adjustable and heated, both, Outside temperature indicator, DAB tuner (digital radio reception), Ceiling light in the cargo area with door contact switch, Automatic activation for headlights, Entry handle on the rear pillar on the right side, Entry handle, Driving Assistance System: Breakdown management, Generator 250 A, Noise reduction measures exterior, Body/superstructure: High-roof van, standard, Instrument cluster with color display, Communication module (LTE) for digital services, Steering wheel (steering column mechanically adjustable), Steering wheel with multifunction buttons, M2 / M 3 approval, Marker lights on the sides, Mercedes-Benz emergency call system, Engine 2.0 L - 125 kW CDI CAT, Multimedia system MBUX (touchscreen 10.25"), Pro, Wheelbase 4335 mm, Low emission according to emission standard Euro VI, Sliding door cargo/passenger compartment right, Safety belt system with warning system (passenger side), Safety belt system with warning system (driver side), Seat cover / upholstery: Start/Stop system engine, USB port center below dashboard (charging function only), Felt battery 92 Ah, Preparation for navigation system (for multimedia system MBUX), Pre-wiring for Remote Service Plus, Heat protection glazing, Permissible total weight 5.0 t / 5.3 t Mercedes warranty 24 months, optional up to 60 months within Germany with a maximum of 250,000 km in conjunction with a

Condition: used, mileage: 14,250 km, power: 120 kW (163.15 HP), first registration: 06/2025, fuel type: diesel, overall weight: 3,200 kg, fuel: diesel, energy efficiency: G, CO₂ emissions: 196 g/km, fuel consumption (urban): 7.4 l/100km, fuel consumption (extra-urban): 7.4 l/100km, fuel consumption (combined): 7.4 l/100km, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 7, total width: 2,249 mm, total height: 1,901 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, seat heater, sliding door, soot filter, traction control, E07 Hill-start assist, E7M MBUX multimedia system, JB6 Parking package with 360-degree camera, JH0 Widescreen cockpit, P2Y STYLE Plus package, Q50 Trailer coupling, ball head, detachable, T55 Electric operation for sliding door, right, T56 Electric operation for sliding door, left, VR9 STYLE, 553 Trailer maneuvering assistant, 02B OPERATING MANUAL AND SERVICE BOOKLET - GERMAN, 502 Digital extra: Updates for intelligent speed assistance system, 806 AEJ X5/1, 875 Wet wiper, heated wiper blades, A50 Front axle with increased load capacity, B25 Parking brake, electric, BA3 Active brake assist, BB6 Brake booster failure compensation, BB7 CO2-optimized braking system, BH1 HOLD function, BS1 Brake calipers with Mercedes-Benz lettering, C6L Multifunction steering wheel, C74 "Mercedes-Benz" lettering on door sill, illuminated, CA1 AGILITY CONTROL chassis, CK8 Steering wheel heating, CL1 Steering wheel adjustable in inclination and height, CL3 Leather steering wheel, CM2 Bumpers and attachments painted in vehicle color, D12 Roof rails, E1D Digital radio (DAB), E1E Digital extra: Hard disk navigation, E1T Touchpad, E4S Digital extra: Smartphone integration, ED4 Fleece battery 12 V 92 Ah, EL9 2-way speakers, front and rear, ES3 12V sockets for rear seat rows, right and left, ET4 Active distance assist DISTRONIC, EW6 Digital extra: Remote Services Plus, EY2 Digital extra: Live Traffic Information, EY5 Mercedes-Benz emergency call system, EY6 Breakdown assistance. We will gladly calculate an individual financing or leasing offer for you and take your used vehicle in part exchange. We look forward to welcoming you to our dealership for further consultation. Vehicle condition according to age/mileage; spot repairs may have been carried out on the vehicle as part of the preparation. No liability for printing and typographical errors. Errors and prior sale excepted. Click features may include digital extras which can be subscribed to completely or with a subscription fee via MercedesMe. ... more on our homepage Lhjdpfx As Afagisb Asn

Condition: used, mileage: 252,000 km, first registration: 07/2023, fuel type: diesel, fuel: diesel, Mercedes-Benz Sprinter Pro 317 CDI Chassis *formerly a refrigerated vehicle!* • Engine: OM 654 DE 20 LA • Power: 125 kW / 170 hp • Emission class: EURO 6e • HVO compatible • 9-speed Tronic automatic transmission • ABS / ASR / ESP • Generator 14V / 250 A • Fleece battery 12 V 70 Ah • Single-pole battery main switch • Jump start contact • Terminal block for electrical connection • Outside temperature display • Engine oil level display on cold start • Fuel tank 93 liters • Fuel filter with water separator • Exhaust gas purification SCR Generation 4 • Crosswind assist • Traffic sign assist • Active lane keeping assist • ATTENTION ASSIST Lsdpoyut H Sefx Ab Aohn • Communication module (LTE) for digital services • Mercedes-Benz emergency call system • Breakdown management • Heat protection glazing with band filter on the windshield • Rain sensor • WET WIPER SYSTEM • Electrically adjustable and heated exterior mirrors, foldable • Semi-automatic TEMPMATIC air conditioning • Multifunction steering wheel • Steering wheel adjustable in height and inclination • Vibration damper • Airbag driver and front passenger • Driver's seat suspension seat, comfort with lumbar support and armrest • Seat heating driver • Driver's seat box low • Front passenger seat two-seater • Seatbelt warning system driver and front passenger • Grab handles for driver and front passenger entry • Rear wall cladding • DAB radio • Navigation system • USB socket 5V • Charging package instrument panel • Smartphone integration package • MBUX multimedia system • 1-DIN compartment at the front under the headliner • Cup holder at the front • Combination instrument with color display • Speedometer in km/h • Central locking • Smoker's package • Acoustics package • Electrical system for external bodywork • LED high-performance headlights • Fog lights with cornering lights • Driving light assistant • Side marker lights • Outline lights • Rear lights in partial LED technology • Adaptive brake light • Extended rear light wiring harness • Electrical system for trailer socket • Pre-wiring electrical system for 3rd brake light • Pre-wiring electrical system, programmable special module • Pre-wiring switch panel • Pre-wiring Remote Service Plus • Pre-wiring for Live Traffic Information • Pre-wiring blind spot assist for bodybuilder • Pre-wiring electrical system for reversing aid • Mud flaps at the front • Longitudinal member reinforcement • Towing eye at the rear • Reference mass at least 2381 kg • Additional structural measures • Additional structural measures 2 • Gross vehicle weight: 3,500 kg • Axle ratio: i=3.923 • Front axle with increased load capacity • HOLD function • Hill start assist • Stabilization Level II • Tire pressure monitoring on front and rear axles, wireless • Tires: 235/65 R16C • Tire tread: 5/5 / 7/9 mm • Rims: Steel 6.5 x 16 • Wheelbase: 3,660 mm • Frame length: 3,350 mm - 1st hand! - German vehicle! Errors and prior sale reserved! Year of construction: 2023

Condition: new, The ideal addition to your grinding/deburring machine (we also have the suitable deburring machine in stock!): Ulmatec Wet Separator Extracted materials: steel / stainless steel / aluminium, dry dust All water-contact parts made of stainless steel. Control via display. Motor: 7.5 kW, 400 V, 50 Hz, IE3 Max. airflow: approx. 11,000 m³/h Max. negative pressure: approx. 4,000 Pa Inlet diameter: Ø 355 mm Discharge: Drain valve Filling: Automatic via solenoid valve Included: HEPA post-filter (for stainless steel processing) ATEX version (e.g. for aluminium processing) Excluding piping Maximum distance between extraction unit and machine: 10 m Lhedpex Diiasfx Ab Ajn Connection to the on-site supply network is to be carried out by the customer.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 6618G03006, Year of construction: 2018, operating hours: 10,500 h, total length: 1,818 mm, total height: 2,185 mm, total width: 2,700 mm, type of input current: three-phase, overall weight: 2,500 kg, input voltage: 400 V, input current: 28 A, compressed air connection: 8 bar, input frequency: 50 Hz, laser power: 400 W, ambient temperature (min.): 18 °C, ambient temperature (max.): 25 °C, table width: 250 mm, table length: 250 mm, We offer this showroom Concept Laser M2 metal 3d printer - Laser Powder Bed Fusion system (LPBF / SLM) + peripherals Specification: - Manufacturer: Colibrium Additive / GE Additive / Concept Laser from Lichtenfels, Germany - 400 W singlelaser, 3D optics (variable focus) - ScanLab Intelliscan + VarioScan, internal water cooling and air conditioning of optical parts - Build envelope: 250 x 250 x 350 mm - Scanning speed: 4,5 m/s with variable focus - Focus diameter: 70 - 500 μm - Layer thickness: 20 - 80 μm - Connected loads: Max. power consumption 10 kW; Power supply 3/N/PE AC 400V, 32A connector; compressed air 6-10bar - Inert gas supply: 2 gas connection provided - Ar and N2 (machine was used with argon mostly) - Filtering system: integrated, with a 20 m2 filter surface - Dimensions 2695 x 1818 x 2185 mm (W x D x H) - Weight: approx. 2,500 kg - Operating conditions: 18 - 25°C - Holders for three different recoater blades types included - A few aluminum and steel build plates included Includes material parameters for: - 316L stainless steel (1.4404), - AlSi10Mg aluminium alloy, - M300 hot-work steel (1.2709), - TiAL6V4 titanium alloy, - 17-4 PH precipitation hardening steel - Parameters for other materials can be inquired from manufacturer Machine has been used with 316L and Aluminium only. Extra options (included): - IP camera for process monitoring with independent network connection. - Additional filter box for quick filter exchange. Age and condition: slightly used Machine installed at showroom in 2019 for demonstration purposes only: Building demo parts for potential customers, buildjobs at trade fairs and our customer open days, some builds for students. Basically, not more than 20% usage of what could be expected of its age. Maintained by certified service technician only. All manufacturers safety service patches and updates until this date have been applied. Machine clock: 10.500 hours - not a "Laser ON time", that is expected significantly lower. Auxiliary equipment (included): - Internal sieving device - to be mounted on top of dose chamber - External sieving station QM Powder - for independent inertized sieving process --- Size: 1050 x 995 x 1600 mm --- Weight: 350 kg --- Power: 3 P/N/PE AC 400V, ±10%, 50Hz-60Hz --- Compatible with bottles and Concept Laser M2 powder containers - Wet vacuum cleaner for powder materials Ruwac NA7-11 - Electric lifting device with vibration generator for powder containers - filling machine and external powder sieving - Stylish storage for 4 powder containers (some containers included with the machine) --- Size: 1150 x 1220 x 870 mm (H x W x D) --- Weight: 250 kg Ledpjz T Nc Defx Ab Ajhn Original price: 550.000 Eur Optional auxiliary equipment (not included in listing price): - Nitrogen generator: Parker N2 Midigas 6 (requires compressed air input) with 250L buffer tank -- Extra 1000L buffer tank for nitrogen generator for faster inertization + 4.000 Eur - Heat treatment furnace with gas chamber and trolley: Nabertherm N 41/H -- Chamber: 350 x 500 x 250 mm (W x D x H) -- External dimension: 840 x 1160 x 1320 mm (W x D x H) -- Weight: 260 kg + 3.000 Eur If you have any questions or need more information, feel free to send us a message or give us a call. Video conference can be set up if needed. Machine can be seen at our showroom. Visit is possible upon contact. Misan is Czech authorized reseller for metal AM machines.

Condition: used, Year of construction: 2012, Overview This Gernep Labetta 4/3/8 480 2A is a rotary cold glue labeller for glass bottles, built in 2012 by Gernep (Barbing, Germany). It was in service at a craft brewery and applies body, neck-ring and back labels at up to 9,000 bottles per hour. The machine ran on one format, a 0.30 L BNR beer bottle, and is supplied complete with format parts, a large stock of spare parts and the glue pump units. Technical data - Manufacturer: Gernep (Barbing, Germany) - Model: Labetta 4/3/8 480 2A - Year of manufacture: 2012 - Machine type: rotary cold glue (wet glue) labeller for glass bottles - Output: up to 9,000 bottles/h - Labelling stations: 2 - station 1 body label and neck-ring label, station 2 back label - Bottle format: 0.30 L BNR beer bottle (glass) - Direction of operation: left - Control: Siemens S7 Equipment - Two wet glue labelling stations for body, neck-ring and back labels Ljdpfx Abjz I Rt Es Ajhn - Format parts for the 0.30 L BNR bottle - Large stock of spare parts - Glue pump units - Complete technical documentation: operating manuals, spare parts lists, component manuals, electrical and mechanical drawings Condition Taken out of service in working condition in May 2026 and stored since. Regularly maintained by Gernep; major Gernep service in March 2025 with new bearings and wear parts. Everything required to put the machine back into operation is included. The machine can be moved by forklift or pallet truck. Inspection is possible by arrangement, and the former operators are available for questions. Availability Immediately available. Location: Netherlands.

Condition: excellent (used), CATALOGUE NUMBER 7556 Technical data: - min / max width of the workpiece 20 / 240mm - min / max height of the workpiece 8 / 160mm - number of spindles 4 1) horizontal lower 240mm 5.5kW 2) vertical right 160mm 5.5kW 3) vertical left 160mm 5.5kW 4) horizontal upper 240mm 7.5kW - all heads adjustable up/down, left/right - spindle diameter 40mm – from above: - 6 infeed, toothed rollers, including 2 double rollers - 2 outfeed, smooth, rubber rollers – from below: - side pressure before and after the roller in the lower bed - toothed, infeed roller, swivel in the lower bed before the first spindle - 2 pneumatic side pressure rollers - outfeed, metal, smooth roller - all rollers with pneumatic pressure - length of the infeed bed 2180mm - bed adjustable up/down - central lubrication - electric adjustment of the cutting depth - lifting motor 0.75kW - stepless speed adjustment of the feed rate on a frequency inverter 6-30m/min - feed motor 3kW - feed on Cardan shafts - enclosed in a cabinet + - diameters of the dust extraction nozzle 4x150mm - dimensions L/W/H 3750x1750x1800mm - weight 3300kg ADVANTAGES – with 4 heads – ideal for wet and dry wood Lsdpfszu R R Hox Ab Aohn – used machine, in perfect condition Net price: 66900 PLN Net price: 15558 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to higher fluctuations)

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 630056, total width: 1,500 mm, overall weight: 5,200 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 5 A, Equipment: documentation/manual, The ERNST Neptun EBB 1500 is a deburring machine for sheet metal processing, used to clean and round the edges of parts cut, punched, or burned with a laser. This machine enables the alternating processing of various materials, such as steel, aluminum, galvanized sheets, or materials coated with protective film, thanks to its flexible deburring roller and brush set. Main features of the ERNST Neptun EBB 1500: • Versatility: Processes parts made of different materials without the need for constant replacement of abrasive elements. Ledpfxez Spmto Ab Aohn • Functionality: Uses a flexible roller for deburring and a set of brushes (steel or lamellar) for dulling or rounding edges. • Precision: Allows for achieving identical and uniform radii on the edges. • Ideal solution for: Companies that process various materials where edge finishing is required after cutting. Important information: The machine has different options. It can hold parts pneumatically or magnetically. Modules: E – Module with a deburring roller B – Stainless steel brush module – for dulling edges and removing oxides up to 6 mm B – Scotch/Vlies brush module – for rounding edges 0.1 – 0.4 mm and applying texture to the material surface. With this type of machine, material processing is done in a wet environment, so there is no need to retool or clean the machine, and it can work with various types of materials, such as aluminum, stainless steel, structural steel, etc., in continuous operation. The entire process takes place in a closed water system with the addition of a special emulsion, which ensures that neither the machine components nor the processed parts rust. From time to time, water needs to be replenished as it evaporates in the parts drying system and during filtration in a special filter within the machine.

Condition: excellent (used), CATALOG NUMBER: 7503 TECHNICAL DATA: - max planing width 610mm - max planing height (two-sided) 200mm - max planing height (four-sided) 100mm Top: - 2 rubber feed rollers - 2 toothed feed rollers - metal feed roller - geared feed roller - pawls - pressure roller - 2 geared feed rollers - pressure roller - planing shaft 610mm, 4-knife, 7.5kW - pressure roller - smooth, metal feed roller - pressure roller - profiling shaft 7.5kW - pressure roller - rubber feed roller Bottom: - planing shaft, axis 35mm, axis length 130mm, 2.2kW - 2 guide strips - feed table - smooth feed roller - planing shaft 610mm, 4-knife (2 knives installed), 7.5kW - 2 smooth feed rollers - split, metal slip roller - side pressure roller Rear: - side spindles + 2 pressure rollers - 1) vertical right 95mm, 4kW - 2) vertical left 95mm, 4kW - spindle diameter 35mm - spindles adjustable up/down, right/left - adjustable rollers in the lower table - electric thickness setting - 6 feed speeds 7/9/11.5/14/18/23 m/min - feed motor 3.1kW - dust extraction port diameters 3x120, 3x160mm - dimensions (L/W/H) 3150x1900x1600mm - weight approx. 3500kg ADVANTAGES: – best wide-belt planer for wet and dry wood Lodpfx Aszr Ixcob Ashn – ideal for processing timber, flooring, etc. – additional profiling shaft and planing shaft (undercutter) – 4 horizontal planing shafts + 2 vertical spindles – manufactured by the German brand KUPFERMUHLE – used planer, very good condition Net price: 66900 PLN Net price: 15558 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to fluctuations)

Condition: not inspected (used), Year of construction: 2005, Without battery Ljdpfx Abshzrbne Ajhn Manufacturer: Fimap

Condition: used, mileage: 48,494 km, power: 90 kW (122.37 HP), first registration: 04/2013, fuel type: diesel, empty load weight: 3,000 kg, maximum load weight: 2,400 kg, overall weight: 5,400 kg, axle configuration: 4x4, wheelbase: 2,400 mm, brakes: other, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 2, loading space length: 2,100 mm, loading space width: 1,500 mm, loading space height: 400 mm, Year of construction: 2013, operating hours: 3,945 h, Equipment: ABS, additional headlights, all wheel drive, cabin, differential lock, immobilizer system, power assisted steering, soot filter, trailer coupling, * German vehicle * First owner * Condition: see photos * Only 3,945 operating hours * Three-sided tipper body with winter service equipment, including salt spreader and snowplow * Wet salt spreader, Schmidt Type STRATOS B11-15 * Robust belt spreader * Wet salt system (FS 30) with side brine tanks * Container volume: 1.2 m³ * Spreading width: 1 to 8 m (gravel) or 1 to 6 m (salt) * Snowplow, Schmidt, Type FLL 18 * Clearing width: 2,090 mm at 30° * 4x4, all-wheel drive * Tipper dimensions: Length 2,100 mm x Width 1,500 mm x Height 400 mm * Original 48,494 km * Municipal plate * Front hydraulics + electrical system * Trailer hitch * 6-speed manual transmission * 2x trailer load: 3,500 kg * Trailer hydraulics * Cab with 2 suspension seats * Electrically heated mirrors * Radio CD * Work lights * Rotating beacon * Various attachments available at an extra cost, such as: front boom with mulcher FIEDLER FFA 400M-K - hedge trimmer Fiedler FH1500 - counterweight Fiedler - front-mounted sweeper Schmidt LKS-H * Differential lock * Leaf spring suspension * Raised main headlights * Raised front panel * Front lift * Wheelbase: 2,400 mm * Steel floor * Gross vehicle weight (GVW): 5,400 kg * Unladen weight: 3,000 kg * Payload: 2,400 kg * If sold to businesses and for export (non-EU and EU), the German commercial law applies. If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without a new DGUV, without a new SP, without a new UVV. Lhjdpfx Abozz R Iro Aon You can find more trucks on our homepage at: We speak the following languages: German, English, Polish, Turkish. Note: We strongly recommend and offer the possibility of inspecting and examining the goods so that no false impressions arise in the buyer regarding the condition and suitability. Inspection and examinations are possible at any time by appointment and are expressly desired. All information is without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Changes, prior sale and errors excepted.

Condition: excellent (used), Catalog number 7294 TECHNICAL DATA - Max. width of workpiece: 230mm - Min. width of workpiece: 15mm - Max. height of workpiece: 160mm - Min. height of workpiece: 10mm 7 spindles: 1) Horizontal, lower: 230mm, 7.5kW 2) Vertical, right: 160mm, 5.5kW 3) Vertical, left: 160mm, 5.5kW 4) Vertical, right: 160mm, 5.5kW 5) Horizontal, upper: 230mm, 7.5kW 6) Horizontal, upper: 230mm, 7.5kW 7) Horizontal, lower: 230mm, 5.5kW - All spindles adjustable up/down, left/right - Spindle diameter: 40mm - Spindles 3, 5, and 6 are electrically adjustable from the control panel to the desired dimension (ATS) - Motor: 2 x 0.37kW - Spindle diameter: 40mm - All spindles equipped with a brake From above: - 8 feed rollers, toothed, metal, including 2 double rollers - 3 discharge rollers, toothed, rubber, double rollers From below: - Feed roller, toothed, pulling, pivoting - 3 discharge rollers, pulling, metal, smooth Lhedpsz Nlc Eefx Ab Aen - Rollers pneumatically pressed - Length of feed table: 2480mm - Central lubrication of the table - Electric adjustment of planing thickness - Body lifting motor: 0.56kW - Smooth feed rate adjustment on a frequency inverter: 6-24m/min - Feed motor: 3.7kW - Feed on Cardan shafts - Diameter of dust extraction port: 7x125mm - Dimensions (L/W/H): 5520x1930x1900mm - Weight: approximately 4000kg ADVANTAGES – With 7 heads – Ideal for both wet and dry wood – With ATS – Original DTR documentation + CE – Unpainted – Used planer, in perfect condition Original photos Net price: 156900 PLN Net price: 36500 EUR, depending on the exchange rate of 4.3 EUR (Prices may change due to higher fluctuations)

Condition: ready for operation (used), * Brand: Metso /CFBK * Model: screening machine for wet screening * Stock: 2 pieces Lhjdpfsyymydsx Ab Asn * 1x Type: 20/60-3 * Surface : 6000 x 2000 mm - 3 decks. * incl.: springs and 22 kW E-motor. * 1x Type: 17/50-3 * Surface : 5000 x 1700 mm - 3 decks. * incl.: springs and 15 kW E-motor.

Condition: used, Degen FSM 300 Surface Grinder Lhsdpfx Aoznirieb Aon High-quality precision surface grinder from the German manufacturer Willy Degen, model FSM 300. This machine is characterized by its compact design and extreme precision, making it ideal for tool and mold making. It is perfect for workshops with limited space, where accuracy is still a top priority. Extensive accessories & highlights included: Digital Readout (DRO): For precise work and error-free positioning. Original dust extraction & wet grinding unit: Ready for immediate connection for clean operation and optimal workpiece cooling. Magnetic chuck: Already mounted for immediate use. Technical data (according to the nameplate): Manufacturer: Willy Degen (Schömberg) Type: FSM 300 Machine No.: 1309 Year of manufacture: 2000 Connection: 400 V / 50 Hz (high voltage) Power: 2.7 kVA / 5.6 A Control voltage: 24 V DC "Everything from one source: We would be happy to offer you suitable bank financing for your project." More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: refurbished (used), functionality: fully functional, overall weight: 939 kg, total height: 785 mm, total length: 1,025 mm, total width: 355 mm, battery capacity: 620 Ah, battery voltage: 48 V, remaining battery capacity: 89 %, battery manufacturer: AIM, battery model: 48V 4PzS620, Forklift battery 48V 4PzS620 Battery 89% TESTED Year of manufacture: unknown Dimensions (LxWxH): 1225mm x 355mm x 785mm Weight: 939kg Battery has been serviced and tested by a specialist company. Capacity test (C5 discharge test): 552/620 Ah battery Remaining capacity: 89% Lhjdpfx Absx Hi Rlj Aen With Aquamatik filling system (BFS) Supplied with pole screws but WITHOUT end cable

Condition: used, Krauss-Maffei Door Foaming Carousel (Unused), Wet Box System, Fixture Dimensions Length x Width x Height 2300/950/200mm, Cycle Time 12 Seconds, 24 Foaming Fixtures, 2 x Mixing Heads, Mould Change Over/Storage System, ABBiRB 6700 Loading & Unloading Location: These lots are located in Porcia, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Lodpfxsz I S Dfo Ab Aohn

Condition: excellent (used), KARL SCHNELL 740 HORIZONTAL MIXER – STAINLESS STEEL KARL SCHNELL 740 industrial horizontal mixer, designed for mixing, homogenizing, and preparing food products in industrial facilities processing meat, prepared foods, and pet food. The equipment incorporates a large-capacity horizontal tank with a mechanical agitation system, which allows for uniform distribution of ingredients and the creation of homogeneous mixtures of solid, pasty, or semi-solid products. Its stainless steel construction, robust industrial design, and bottom discharge system facilitate integration into production lines that require controlled and repetitive mixing processes. MAIN FEATURES - Manufacturer: KARL SCHNELL - Model: 740 - Type: Industrial horizontal mixer - Application: Food mixing and homogenization - Stainless steel horizontal tank - Internal mechanical agitation system - Mixing of solid and pasty ingredients - Motorized drive - Mechanical transmission system - Top product feed - Bottom discharge system - Discharge valves and connections - Visible pneumatic drives - Protective side panels Lhjdsz R Tmpspfx Ab Ajn - Robust industrial structure - Access for inspection and maintenance - Integrable into complete food processing lines OPERATING PROCESS The ingredients are introduced into the horizontal tank of the KARL SCHNELL 740 using the top feed system. During the process, the internal mixing elements perform a mechanical movement that allows the ingredients to be distributed, different components to be incorporated, and the product to be homogenized. The mixing time and conditions are adjusted according to the characteristics of the raw material and the required formulation. Once the cycle is complete, the product is discharged through the bottom discharge system to continue to the next production operations. It can be integrated with industrial grinders, emulsifiers, product pumps, cooking systems, feed tanks, fillers, and packaging lines. APPLICATIONS Especially suitable for meat industries, wet pet food manufacturers, and prepared food producers. Depending on the installed configuration, it can be used for: - Ground meat mixtures - Meat preparations - Products for sausages - Wet food for dogs and cats - Mixtures of meat and by-products for pet food - Pâtés and food pastes - Preparations with proteins and fats - Semi-solid and pasty products - Other compatible food formulations The KARL SCHNELL 740 provides an industrial solution for the preparation and homogenization of food mixtures, facilitating the uniform incorporation of ingredients before subsequent processing operations. The useful capacity of the tank, installed power, agitation speed, and internal configuration should be confirmed through the equipment's technical documentation. Machine available for inspection. Additional technical information, production capacity, formats, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 2006, functionality: fully functional, grinding width: 900 mm, For sale are professional, wide-belt wet grinding machines, BÜTFERING PROFI SPW 409 RTTR (SteelMaster Prima), designed for grinding the surfaces of stainless steel, aluminum, and other metals after laser cutting. The machine is in good technical condition and fully functional, but 2 out of the 4 grinding stations require calibration or repair, as they are currently grinding with insufficient accuracy. Two stations are operating accurately. The machine is connected and ready for inspection and testing. Technical specifications: Manufacturer: BÜTFERING Model: PROFI SPW 409 RTTR / SteelMaster Prima Year of manufacture: 2006 Made in: Germany Number of stations: 4 Lhsdszkh Stopfx Ab Asn Power supply: 400 V / 50 Hz Required air pressure: 8 bar Grinding width: 900 mm Equipment: 4 grinding stations Touch screen control panel Wet grinding system Conveyor belt Adjustable feed rate Industrial cooling system Ideally suited for: Stainless steel products Aluminum products Sheet metal processing companies Metal surface preparation prior to painting Removal of slag after laser or plasma cutting Surface grinding and satin (No. 4) finishing. If you have any further questions, please do not hesitate to ask.

Condition: new, fuel type: electric, Year of construction: 2026, machine/vehicle number: 2700x4500, Equipment: low noise, Main Technical parameters of the ball mill Drum diameter: 2400mm Drum length: 4500mm Motor power: 320KW Max input size: 25mm Capacity:35-60 t/h Weight: 72Tons Ball loading: 30Tons Besides this model, we also have the other models like 2700x4500, 3200x4500, 1830x13000mm, and so on, and we can also offer customerization service, we can also provide complete grinding solution for various industries like cement, quartz, ore beneficiation plant, and so on, welcome to contact us for more info. A ball mill is a common grinding machine used to grind and blend materials for use in mineral processing, including ore mining and the production of silica (silicon dioxide). When it comes to ore mining and silica grinding, the characteristics of the ore and the final product requirements will play a crucial role in selecting the appropriate ball mill. Here are some considerations for using a ball mill in ore mining and silica grinding: 1. Ore Characteristics: - Hardness: The hardness of the ore determines the type of ball mill that is most suitable. Harder ores may require a more robust and wear-resistant ball mill. - Particle Size Distribution: The initial particle size of the ore affects the grinding process. Different ores may require different approaches to achieve the desired particle size. 2. Silica Grinding: - Silica Content: If the primary goal is to grind silica, it's important to consider the initial silica content and the desired final particle size. Silica grinding often requires special attention to prevent excessive wear on the milling equipment. 3. Ball Mill Type: - Overflow vs. Grate Discharge: The type of discharge from the ball mill can impact the final product and the grinding efficiency. Overflow mills are generally used for most grinding applications, while grate discharge mills are more suitable for certain types of ores. 4. Mill Size and Capacity: - Mill Diameter and Length: The size of the ball mill should be selected based on the amount of material to be ground and the desired throughput. - Capacity: Ensure that the chosen ball mill has the capacity to handle the required volume of material efficiently. 5. Grinding Media: - Material and Size: The choice of grinding media (balls or cylpebs) and their size depends on the hardness of the ore and the desired final particle size. Different grinding media materials can impact the purity of silica during grinding. 6. Liners and Lifting Aids: - Liners: Consider the type of liners used in the ball mill to protect the shell and optimize the grinding process. - Lifting Aids: Some mills use lifting aids to enhance the grinding action and promote better mixing of the material. 7. Control and Monitoring Systems: - Automation: Utilize control systems to automate the milling process and ensure optimal performance. - Monitoring: Regularly monitor the milling process to adjust parameters as needed for consistent and efficient operation. 8. Safety Measures: - Safety Systems: Implement safety features to protect personnel and equipment during operation. Always follow the manufacturer's recommendations and guidelines for operation and maintenance to ensure safe and efficient use of the ball mill in ore mining and silica grinding applications. Ledpfx Aboq Igiie Ashn

Condition: used, mileage: 17,350 km, power: 140 kW (190.35 HP), first registration: 10/2025, fuel type: diesel, overall weight: 3,100 kg, fuel: diesel, energy efficiency: G, CO₂ emissions: 197 g/km, fuel consumption (urban): 7.5 l/100km, fuel consumption (extra-urban): 7.5 l/100km, fuel consumption (combined): 7.5 l/100km, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 7, total width: 2,249 mm, total height: 1,901 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, seat heater, sliding door, soot filter, traction control, C1L AMG front bumper with black trim elements, E07 Hill-start assist, E65 Burmester surround sound system, E7H MBUX multimedia system High, FB1 AMG trim elements, FB4 AMG rear spoiler on tailgate, JB6 Parking package with 360-degree camera, JH0 Widescreen cockpit, PS2 AMG Line, Q50 Trailer coupling with detachable ball head, R1V AMG light-alloy wheels 8 J x 19 black, T55 Electric operation for right sliding door, T56 Electric operation for left sliding door, VL7 AMG floor mats, VQ1 AVANTGARDE, 553 Trailer maneuvering assistant, Z3N Night package, 02B OPERATING MANUAL AND SERVICE BOOKLET – GERMAN, 502 Digital extra: Updates for intelligent speed assistant, 7B4 WIPPS countries WEU+COC, 806 AEJ X5/1, 875 Wet wiper wiper blades, heated, A50 Front axle with increased load capacity, B25 Parking brake, electric, BA3 Active brake assist, BB6 Brake booster failure compensation, BB7 CO2-optimized brake system, BH1 HOLD function, BS1 Brake calipers with Mercedes-Benz lettering, C6L Multifunction steering wheel, C74 Illuminated Mercedes-Benz lettering on door sill, CA3 Active steering assist, CF8 Sports suspension, CK8 Steering wheel heating, CL1 Steering wheel adjustable in inclination and height, CL3 Leather steering wheel, CM2 Bumpers and attachments painted in vehicle color, CN1 Side skirts, exterior, D14 Roof rails, anodized, E1D Digital radio (DAB), E1E Digital extra: Hard disk navigation, E1T Touchpad, E4S Digital extra: Smartphone integration, ED4 Fleece battery 12 V 92 Ah, EI0 Wireless charging system for mobile devices, ES2 12 V socket in trunk / cargo area, ES3 12 V sockets, We will gladly calculate an individual financing or leasing offer for you and accept your used vehicle in trade. We look forward to welcoming you to our dealership for further consultation. Vehicle condition according to age / mileage, spot repairs were carried out on the vehicle as part of the preparation. No liability for printing and typographical errors. Errors and prior sale reserved ... more on our website. Lodj Afagpspfx Ab Ajhn

Condition: used, Year of construction: 2016, functionality: fully functional, BAC VXC S455 evaporative condenser, R134a Used 5 units Baltimore Aircoil International (BAC) VXC S455 evaporative condenser, built 2015, serial number H150832701. Made in Heist-op-den-Berg, Belgium. It is an evaporative condenser: hot refrigerant vapour enters the coils inside the unit, water is sprayed over the coil surface, and centrifugal fans draw air through the pack. The refrigerant condenses and returns to the refrigeration plant. No separate water-cooled condenser is required on the chiller. The unit has twin R134a heat-exchanger coils (circuits A and B) and a centrifugal fan section. It was installed on a rooftop as the heat-rejection side of a refrigeration / chilled-water plant. Manufacturer: Baltimore Aircoil International nv Model: VXC S455 Serial number: H150832701 Year of manufacture: 2015 Type: induced-draft evaporative condenser Vessel type code: PED C100 Refrigerant: R134a Coil volume: 932 L per coil (A and B) Design pressure: −1 / 23 bar Test pressure: 34 bar Design temperature: −20 / +120 °C Fan overall efficiency (nameplate): 59.05% Marking: CE Lsdpfx Abozz Side Aehn BAC catalogue figures for VXC S455 Base heat rejection: approx. 1,961 kW Operating weight: approx. 11,270 kg Shipping weight: approx. 8,125 kg Dimensions: approx. 5,385 × 2,397 × 4,248 mm Air flow: approx. 34.9 m³/s Fan motor: 1 × 30 kW Spray water: approx. 38.5 l/s, pump 1 × 4 kW Application Heat rejection for industrial chillers and refrigeration plants on R134a. A natural match for the Star Refrigeration package water chillers (contract 100663, 840 kg R134a charge): discharge gas goes to the BAC coils, liquid returns to the chiller. Condition and sale Used industrial equipment, removed / being removed from site. Price on request. Can be sold with the Star chillers or as a standalone condenser. Model, serial number and pressures are taken from the factory plates; actual capacity at the new site depends on condensing temperature and ambient wet bulb.

Condition: used, Year of construction: 2002, Technical details: thickness: 0,6 mm width: 1200 mm Length: 100 mm work speed: 1,5 - 3 m/min motor power: 45 kw compressed air: 7 bar Total weight, approx.: 4500 kg dimension machine xH: gesamt: 20 m / 2,6 m / 3 m m 2 pcs Sandwich Panel Production Plant The plant is especially suitable for producing light laminated panels. The plant consists of a feeding system (conveyor belt) for the material, cutting system, profile system and an electronically control system. The plant has a length of 20m, width of 2,6m, height of 3m. The total weight of the plant is approximately 4,5 tons. The power consumption including the thermal output is 36 KW. The recommended material of the internal layers are flame retardant Polystyrol or other light heat insulation materials. The sheet will be stable connected under pressure and heat with the Polystyrol through double sided application from portions of glue on the Polystyrol. The panels have good physical characteristics such as thermal insulation, sound insulation, wet consistency, bending strength, compressive strength and mechanical attributes. Any length of the laminated panels is possible and adjustable on customer demand. The color of the panel is variable and is depending from the color of the used sheets. Data Sheet Power Consumption of the plant (with heating system): 36KW Measurements: - Length = 20m - Width = 2,6m - Height = 3 m - Operating Temperatures: The optimal temperature for producing the panels is approximately 25 °C. - Material: galvanized metal sheet on rolls, sheet thickness 0,3 – 0,6mm and a width of 1200mm - Power Supply: 380 V 50Hz - Maximum engine power: 45 KW - Compressed Air: 7 bar Measurements of the laminated panels: Model 1 - Width 800 – 1200 mm - Thickness 20 - 30mm Model 2 - Width 1150 mm Ljdpfsu Nxa Hsx Ab Aehn - Thickness 50 – 150mm( adjustable) production plant consists of: - unwinding device - feed system - lamination - cutting device - glueing - fume extractor device - stacking device - electronic control system (Mitsubishi) *

Condition: excellent (used), Catalog number 6765 TECHNICAL DATA - max. width of workpiece 230mm - max. height of workpiece 160mm number of spindles 4: 1) horizontal lower 230mm, 5.5kW 2) vertical right 160mm, 5.5kW 3) vertical left 160mm – electrically adjustable right/left from the control panel, 5.5kW 4) horizontal upper 230mm – electrically adjustable up/down from the control panel, 7.5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm from above: - infeed rollers, toothed, pulling, 6 pcs, including 2 double rollers - outfeed rollers, pulling, rubber, 2 pcs from below: - infeed roller, toothed, pulling, metal, twisted in the lower table + - outfeed roller, pulling, metal, smooth - rollers adjustable pneumatically - length of infeed table (with pneumatic feeder) 3390mm - possibility of operation without activating the pneumatic feeder, - table adjustable up/down - central lubrication - electric adjustment of planing thickness - stepless adjustment of feed rate - feed on Cardan shafts - feed motor 4kW - enclosed in a cabinet - diameters of dust extraction nozzles 4x120mm - dimensions (L/W/H) 7000x1950x1700mm, - weight approximately 3000kg – for wet and dry wood – pneumatic feeder on the infeed table, – used planer, very good condition Net price: 65900 PLN Lodpfx Ajztzmceb Aohn Net price: 15326 EUR Net price calculated according to the exchange rate of 4.30 PLN/EUR (with larger exchange rate fluctuations, the price may change)