Used Weiss Umwelttechnik Gmbh Climate Test Chamber Climate Chamber for sale (76,040)

Condition: excellent (used), Atlas Type: SC 350 MHG Atlas Solar Climatic Test Chamber, Air-Cooled For sale is an ATLAS SC-340 MHG SolarClimatic Test Chamber (climatic chamber with solar simulation via MHG lamp). The device is suitable for carrying out standardized weathering and aging tests under the combined influence of radiation, temperature, and climate. Features & Highlights: - Precise temperature and humidity control - Integrated humidification system with water reservoir - Cooling via water or air system (optional) - Feed-throughs available for measuring leads - Control via control panel or interfaces (RS232, etc.) - Sturdy test chamber floor, loadable up to 60 kg (optionally reinforced to 150 kg) General Data: Model: SC 340 MHG Hedpfx Aoxbd Raegmjnn Test chamber volume: approx. 335 liters Cabinet weight: approx. 500 kg Irradiation unit weight: approx. 65 kg Technical Data: Test volume: 340 l (internal dimensions 580 × 765 × 750 mm) External dimensions (W×D×H): 865 × 1,595 × 2,180 mm Light source: 1 × 1,200 W MHG lamp Irradiance: 800–1,200 W/m² Illuminated area: approx. 3,300 cm² Weathering spectrum: 300–3,000 nm, compliant tests according to DIN 75220, IEC 60068-2-5, MIL-STD-810F Temperature range with irradiation: –20 °C to +100 °C (±1 K) Temperature range without irradiation: –30 °C to +100 °C (±0.1–0.5 K) Heating/Cooling rates: 3.0 K/min (heating), 2.5 K/min (cooling, without irradiation) Noise level: approx. 58 dB(A) at a distance of 1 m Power supply: 400 V, 3/N/PE, 50 Hz Power consumption: max. 6.2 kW, 16 A Refrigerant: R-404A Weight: approx. 565 kg Information for your safety as a buyer! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers are subjected to a documented trial run. Condition: used Scope of delivery: (See picture) (Specifications and technical details subject to change and errors reserved!) Feel free to contact us by phone for any further questions.

Condition: good (used), Vötsch Model: VCS 7130-15 Vötsch Climate Test Chamber, Water-Cooled Temperature Test Data: Temperature range: -70°C to 180°C Temporal temperature deviation at center of workspace: ±0.3 to ±0.8 K Spatial temperature deviation: ±0.5 to ±2 K Temperature gradient: 1 to 4 K Temperature change rate: Heating: 16 K/min Cooling: 14.5 K/min Climate Test Data: Temperature range: +10°C to +95°C Humidity range: 10 to 98% RH Temporal temperature deviation at center of workspace: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1 K Temperature gradient: 1 to 2 K Temporal humidity fluctuation at center of workspace: ±1 to ±3% RH Hnodpswvgwbsfx Agmen Maximum heat compensation: 8000 W Enclosure dimensions: External dimensions with hinges and door lock: Height: 1995 mm, Width: 1680 mm, Depth: 1855 mm External dimensions without hinges and door lock: Height: 1995 mm, Width: 1300 mm, Depth: 1855 mm Internal dimensions: Height: 950 mm, Width: 1100 mm, Depth: 950 mm Test chamber volume: approx. 1300 liters Feedthroughs: The test chamber is equipped with feedthroughs on both the right and left sides. These allow for test leads and testing devices to be routed into the chamber. 1 x R1 NW 125 mm 1 x R1 NW 140 mm 1 x L1 NW 50 mm Test chamber illumination: Halogen bulb 24V, 50W Power supply: 3/N/PE AC 400V ±10% 50Hz Rated power: 44.0 kW Rated current: 63.0 A Customer-provided fuse: 100 A slow-blow Maximum heat output to the environment: 2.2 kW Permissible test item weight: Total load on shelf supports: 100 kg Test chamber floor: 150 kg, Removable shelf: 50 kg Refrigerants: R 404A/R 23 Weight: 1900 kg For your security as a buyer, please note: The following steps are carried out in advance on our chambers offered for sale: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to changes and errors in the technical data and specifications!) We are happy to answer any further questions by phone.

Condition: excellent (used), Here we offer a Weiss climatic test chamber. Water-cooled Test chamber lighting Halogen bulb 24V, 50W Data for temperature tests: Temperature range: -40°C to +180°C Temporal temperature deviation in the center of the chamber: ± 0.3 to ± 0.8 K Spatial temperature deviation: ± 0.5 to ± 2 K Temperature change rate Heating: 10 K/min Cooling: 12.5 K/min Heat compensation at +20°C 8000 W Hodpfx Agsq Dpzyjmonn Heat compensation at -20°C 3000 W Data for climate tests Temperature range: +10°C to +95°C Humidity range: 10 to 98 % r.h. Temperature deviation in time in the center of the usable space: ± 0.2 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1 K Humidity fluctuation over time in the center of the usable space: ± 1 to ± 3 % RH Test chamber dimensions: Height 950 mm, width 760 mm, depth 650 mm, External dimensions: Height 2025 mm, width 1090 mm, depth 2480 mm, Nominal voltage: 3/N/PE AC 400 V ± 10% 50 Hz Rated current: 24 A Rated power: 16.0 KW Refrigerant: R452A Weight: approx. 900 kg Type: WK-480/40/10 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Weiss Type: WK3-340/70 Weiss Air-Cooled Climatic Test Chamber Touch Panel Control Unit All control and operating commands can be triggered by simply touching the function symbols on the touch panel control unit. Adjustable Feet Hnsdpfx Agev Sr Hzsmon To compensate for uneven floors and ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Plug-ins The test chamber is equipped with plug-ins on the right and left sides. These allow measurement cables and test equipment to be routed into the test chamber. Penetration included in standard equipment R1: NW 125 mm L1: NW 85 mm Volume 335 liters Test chamber dimensions: Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Data for temperature tests: Minimum temperature -72°C Maximum temperature +180°C Temperature deviation, temporal ± 0.1 to ± 0.5 K Temperature homogeneity, spatial ± 0.5 to ± 1.5 K Temperature change rate, cooling 3 K/min Temperature change rate, heating 3 K/min Data for climatic tests: Temperature range +10°C to +95°C Dew point range -3°C to +94°C Humidity range: 10 to 98% RH Temperature deviation, over time: ± 0.1 to ± 0.3 K Temperature homogeneity, spatial: ± 0.5 to ± 1 K Humidity deviation, over time: ± 1 to ± 3% RH Operating data: Test room lighting: 2 x 24V, 50W halogen bulb Nominal voltage: 3/N/PE AC 400V ±10% 50Hz Nominal current: 16 A Nominal power: 4.9 kW Fuse: 16 A slow-blow (on-site) Refrigerant: R-452A/R23 Weight: Approx. 585 kg For your safety, the following information is provided as a buyer! The following steps are performed on our chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), CTS Climate Test Chamber Type: C -40/600, Air-Cooled (converted to R-452a refrigerant) Test chamber volume: 600 liters Temperature tests: - Temperature range: -40°C to +180°C - Temperature deviation: ±0.1 K / ±0.3 K over time (at stabilized condition) - Average temperature rate of change (without test load and radiant heat): - Heating: 2.5 K/min - Cooling: 3.0 K/min - Maximum radiant heat input: 2500 W at +20°C Climatic tests: - Climate range / Technical data: - Temperature range: +10°C to +95°C - Humidity range: 10% r.h. to 98% r.h. - Dew point range I: +7°C to +94°C - Dew point range II: –10°C to +7°C - Consistency values (over time): - Humidity consistency I: ±0.5% r.h. to ±1.5% r.h. Hnodpfxew U Awms Agmsn - Humidity consistency II: ±1% r.h. to ±3% r.h. - Temperature consistency: ±0.1 K to ±0.3 K Chamber internal dimensions (approx.): Height: 850 mm, Width: 850 mm, Depth: 830 mm External dimensions (approx.): Height: 1900 mm, Width: 1115 mm, Depth: 1850 mm Refrigerant: R-452A Power connection: 400V 3/N 50Hz Connected load: 8.2 kW, Rated current: 11.9 A Weight: 550 kg Important information for your purchase! The following checks and procedures are performed on all our offered chambers prior to delivery: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run Condition: used Scope of delivery: (see image) (Subject to changes and errors in the technical data and specifications!) If you have further questions, we will be happy to answer them by phone.

Condition: excellent (used), Vötsch Type: VC³ 7018 Vötsch Air-Cooled Climatic Test Chamber Temperature Test: Temperature Range: -70°C to +180°C Temperature Rate: Heating 4 K/min Temperature Rate: Cooling 3 K/min Climatic Test: +10°C to +95°C Humidity Range: 10% to 98% RH F. Temperature deviation over time: ± 0.1 to ± 0.3 K Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 870 mm x Depth 1550 mm x Height 1800 mm Test chamber volume: 190 liters Nominal voltage: 400 V Nominal current: 14 A Nominal power: 5.5 kW Heat compensation 1500 W (at 20+) Weight: approx. 460 kg For your safety, please note the following information! The following steps are carried out in advance on our chambers: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) Hnjdpfx Agex Hg Uujmon We are happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 1980, functionality: unexamined, machine/vehicle number: GTTS 220, total height: 144 mm, total length: 135 mm, total width: 96 mm, Equipment: documentation/manual, Used Votsch/Weiss GTTS 220 Climate Chamber Manufacturer: Votsch/Weiss Model: GTTS 220 | 20 External dimensions: 135cm x 96cm x 144cm (length x width x height) Hnedjx H N Drjpfx Agmon Max internal dimensions: 65cm x 92cm x 54/40cm (width x depth x height) Voltage: 220/380 V Refrigerant type: R12 Includes manual (installation and operation handbook)

Condition: excellent (used), Year of construction: 2016, We offer here a used rotary indexing table of the brand Weiss. The turntable has a load capacity of approx. 30 tons and a diameter of approx. 3.5m as well as a dead weight with motor of approx. 6500Kg. The control of the turntable is also available, with SEW frequency converter, braking resistor etc.. Hnodpfx Ajni Awpsgmen All documentation is available.

Condition: used, Rotary indexing table, rotary indexing table with 16 stations Rotary indexing machine + TOX hydraulic press Special rotary indexing machine with multiple assembly stations Production and assembly line with rotary indexing system From special machinery manufacturer "AKE-technologies GmbH" Serial number: Order number: 11111 Year of manufacture: 2012 Hnsdpfx Agegd D U Eomjn - large rotary indexing table WEISS type TC500, with 16 stations - pressing station with TOX power pack - vibratory feeder - conveyor belts - testing stations - some stations still visible in the photos but already dismantled Required space L x W x H approx. 3500 x 2750 x 2300 mm Net weight approx. 3000 kg All in as-new condition – the system was never used in series production.

Condition: good (used), Year of construction: 2005, functionality: fully functional, pressing force: 4 t, filling opening width: 730 mm, filling opening length: 400 mm, bale length: 700 mm, bale width: 350 mm, bale height: 500 mm, bale weight: 40 kg, total width: 988 mm, total height: 2,033 mm, total length: 752 mm, type of input current: AC, input voltage: 230 V, overall weight: 380 kg, noise level: 60 dB, power: 1.5 kW (2.04 HP), input frequency: 50 Hz, Fully functional and tested vertical baler for packing small quantities of cardboard or plastic. More information or photos by email or phone. Hnodpfx Agsvy Drxjmsn

Condition: excellent (used), Here we offer you a Heraeus Vötsch temperature testing chamber. Heraeus Vötsch temperature testing chamber, water-cooled Temperature range: -70°C to +180°C Temperature deviation (time-related): ±0.1 to ±0.5 K Temperature deviation (spatial): ±0.5 to ±2.0 K Temperature change rate (cooling): 7.5 K/min Temperature change rate (heating): 7.5 K/min Thermal compensation +20°C: 3000 W Thermal compensation -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 450 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1280 mm, Height 1575 mm Observation window: Width 300 mm x Height 540 mm Hodpfezdtdhjx Agmsnn Test chamber volume: 190 liters Rated voltage: 3/N/PE AC, 400 V ±10 %, 50 Hz Rated power: 10.5 kW, Rated current: 22 A Fuse, on customer side: 32 A, slow-blow Sound pressure level at 1 m distance (free-field measurement): < 69 dB(A) Side access: 50 cm / 125 cm Chamber is water-cooled Refrigerant: R 404A and R 23 Weight: approx. 460 kg Type: VTS 7018-5 For your security as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. Refilling with refrigerants that comply with legal regulations 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), RS Simulators Here we offer a temperature testing chamber. Air-cooled Temperature range: -50°C to +100°C Test chamber dimensions: Width 520 mm x Height 520 mm x Depth 500 mm External dimensions: Width 820 mm x Height 1750 mm x Depth 1300 mm Power consumption: 13.5 A Connection voltage: 3x400V/N/PE 50Hz Weight: approx. 800 kg Type: TS 150/45 (50) Hnjdezdtc Ropfx Agmen Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Binder MK 115 E3.1 Temperature Cycling Chamber Device Data Manufacturer: Binder Type: MK 115 E3.1 Article Number: 9020-0175 Design: Temperature Cycling Chamber Refrigerant: R404A (1.20 kg) Description Used temperature cycling chamber from Binder. Suitable for dynamic temperature tests and rapid temperature changes. Used in material testing, research, and quality assurance. Technology APT.line™ preheating chamber technology Natural simulation of temperature profiles High precision and reproducibility Features MCS controller with program memory Adjustable ramp functions Temperature selector limiter Class 2 (DIN 12880) Hnodpfjy H Hvljx Agmon Heated viewing window with interior lighting Ethernet interface Feedthrough Ø 50 mm (left) Stainless steel interior with insert 4 rollers (2 lockable) Technical Data Temperature range: -40 °C to +180 °C Fast temperature changes (temperature cycling mode) Interior volume: 115 liters Dimensions External (W x H x D): approx. 980 x 1725 x 865 mm Internal (W x H x D): approx. 600 x 480 x 400 mm Electrical Data 400 V / 50 Hz Power: 3.5 kW Current: 11.0 A Pressure Data Max. operating pressure: 29 bar Weight approx. 260 kg Condition: Used. Optical and technical condition, see pictures. Scope of delivery: Binder MK 115 temperature cycling chamber Insert / interior fittings Inspection possible by arrangement. Loading and transport can be arranged upon request. Subject to change and prior sale. If you have any questions, please contact us.

Condition: good (used), ESPEC Climate Testing Chamber PL-3KPH Manufacturer: ESPEC Corp. Type: PL-3KPH Design: Air-cooled temperature and climate testing chamber For sale is a used ESPEC climate testing chamber for temperature and climate testing in research, development, quality assurance, and industry. Technical data: Test chamber volume: approx. 400 liters Temperature range: approx. -40 °C to +180 °C Humidity range: approx. 20 % to 98 % RH Internal dimensions (W x H x D): approx. 600 × 850 × 800 mm External dimensions (W x H x D): approx. 1010 × 1690 × 1195 mm Electrical connection: AC 400 V / 3~ / 50 Hz Max. power consumption: approx. 11 A Weight: approx. 350 kg Cooling: air-cooled No external water connection required Refrigerant according to label: R452A – approx. 1.2 kg Features: Touchscreen control Programmed and constant operation Temperature and humidity control Observation window in the door Stainless steel test chamber Interior lighting / Chamber Lamp Side cable/pipe passage Ø approx. 100 mm Overheat protection Hour counter integrated RS-232C interface Water tank system Specimen Power Supply Control Time Signal connection Condition: Used unit with signs of age and wear. Some rust and corrosion spots are present in the lower housing area. Interior with signs of use. Optical condition, see pictures. Scope of delivery: ESPEC Climate Testing Chamber PL-3KPH Shelf included Scope of delivery as shown in the pictures Service: Functional check and replacement of necessary components Refilling with legally compliant refrigerant if required Leak test with certificate Notes: Inspection possible by arrangement. Hodpfx Aey N Awqogmjnn Loading can be organized. Commercial sale Important note: All information has been provided to the best of our knowledge based on the pictures, nameplates and manufacturer information. Shipping possible. Subject to change, errors and prior sale. We are happy to answer any further questions by telephone.

Condition: excellent (used), RS Simulators We offer a test cabinet here. Water-cooled Temperature range: -40°C to +180°C Test chamber dimensions: 850mm x 850mm x 800 mm (W x H x D) External dimensions: 1100mm x 1850mm x 1500mm (W x H x D) Power consumption: 13.5 A Hjdszdn Stjpfx Agmsnn Refrigerant: R404A Connection voltage: 3x400V/N/PE 9A Weight: approx. 750kg Type: TS 600/45 Explosion-proof operation not tested However, max. 160°C in this condition Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), CTS Temperature Shock Test Chamber Type: TSS-70/32 Manufacturer: CTS Klima Temperatur Systeme Design: Air-cooled For sale is a CTS temperature shock test chamber for temperature change and shock testing in industry, research, and development. Technical data: Test chamber volume: approx. 32 liters Max. test specimen weight: approx. 10 kg Temperature ranges: Hot chamber: +50 °C to +200 °C Cold chamber: -80 °C to +100 °C Performance data: Heating rate: approx. 6 K/min Cooling rate: approx. 6 K/min Temperature change rate: up to approx. 100 K/min Changeover time: < 10 seconds Hnjdpfxsy I Ntcj Agmon Temperature deviation: ±1 K / ±2 K Electrical data: Connection: 400 V / 3/N / 50 Hz Rated power: approx. 9.7 kW Rated current: approx. 15.4 A Fuse: 16 A slow-blow Protection class: IP 22 Refrigerant: R404A: 2.3 kg / R23: 0.90 kg Pressure data: Operating overpressure: 25 bar Test pressure: 27.5 bar Dimensions: approx. 1325 x 2012 x 1820–2020 mm (W x D x H) Weight: approx. 650 kg Further data: Sound pressure level: < 58 dB(A) Compressed air connection: 1/4" male Equipment: Two-chamber system (hot / cold chamber) Digital CTS control Display / control panel Program operation Operating hour counter Observation window Interior lighting Temperature limiter Test specimen protection RS232 interface Documentation: Declaration of conformity available Test certificates available Operating manual available Wiring diagram available Piping diagram available Quick start guide available Safety data sheets available Note: The table shown in the photos is not included in the sale. Condition: Used Optical condition see pictures Scope of supply as shown in the pictures Inspection possible by appointment. Loading can be organized. Commercial sale (Changes and errors in the technical data and information are reserved!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Vötsch Temperature Shock Testing Chamber Type: VT 7012 S2 Manufacturer: Vötsch Industrietechnik GmbH Design: Water-cooled For sale is a two-chamber temperature shock testing chamber from Vötsch, designed for rapid temperature change tests. Suitable for industrial, automotive, aerospace, as well as research and development applications. Temperature Ranges: Hot Chamber: +50 °C to +220 °C Cold Chamber: -80 °C to +70 °C Temperature Data: Temporal temperature deviation: ±1 K Spatial temperature deviation: ±2 K Heating rate, hot chamber: approx. 11 K/min Heating rate, cold chamber: approx. 2 K/min Cooling rate: approx. 3 K/min Test Chamber: Volume: approx. 125 liters Internal dimensions: approx. 470 x 650 x 410 mm Cable entry: Ø 67 mm Electrical Data: Connection: 3/N/PE AC 400 V ±10% / 50 Hz Rated power: approx. 10 kW Rated current: approx. 25 A Refrigerant: R404A: 2.9 kg R23: 1.27 kg Pressure Data: ND max.: 22.5 bar HD max.: 25 bar Dimensions: approx. 930 x 2115 x 1970 mm Weight: approx. 1000 kg Equipment: Two-chamber shock testing system Digital control Program operation Observation window Cable entry Condition: Used Optical condition as shown in the pictures Normal storage and usage marks present Scope of delivery: Vötsch VT 7012 S2 temperature shock testing chamber Accessories as shown in the pictures Important Note: All information has been provided to the best of our knowledge based on the pictures, nameplates, and manufacturer information. Shipping is possible. Subject to changes, errors and prior sale. Hnsdpfsy Iyuwsx Agmen We are happy to answer any further questions by phone.

Condition: excellent (used), Vötsch VC³ 4018 Climate Test Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: VC³ 4018 Machine Type: Climate Test Chamber / Temperature Test Chamber Design: Air-cooled Test Chamber Volume: approx. 190 liters For sale is a used climate test chamber from the manufacturer Vötsch. The VC³ 4018 is suitable for temperature and climate tests, environmental simulation, material testing, electronics testing, quality assurance, as well as research and development applications. Technical Data: Temperature Range: -40 °C to +180 °C Temperature Change Rate (Heating): approx. 4 K/min Temperature Change Rate (Cooling): approx. 4 K/min Max. Heat Compensation in Temperature Operation: approx. 2300 W Hedpozc Ht Iefx Agmonn Temperature Deviation (Time): ± 0.1 to ± 0.5 K Temperature Homogeneity (Spatial): ± 0.5 to ± 1.5 K Climate Range (Temperature): +10 °C to +95 °C Dew Point Range: -3 °C to +94 °C Humidity Range: 10 to 98 % RH Temperature Deviation (Time) in Climate Operation: ± 0.1 to ± 0.3 K Temperature Homogeneity (Spatial) in Climate Operation: ± 0.5 to ± 1 K Humidity Deviation (Time): ± 1 to ± 3 % RH Heat Compensation in Climate Operation: approx. 400 W Test Chamber Dimensions (approx.): 580 x 450 x 750 mm (W x D x H) Housing Dimensions (approx.): 870 x 1550 x 1800 mm (W x D x H) Weight (approx.): 470 kg Refrigerant: R404A Refrigerant Quantity: 2.50 kg ND max.: 22.5 bar g HD max.: 25 bar g Mains Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated Power: 4.1 kW Rated Current: 14 A Test Chamber Lighting: Halogen, 2 x 24 V / 50 W Equipment Touch Panel Operation Viewing Window in the Door Stainless Steel Test Chamber Test Chamber Lighting Side Pass-Throughs Shelves / Interior Fittings as Shown in Pictures Documentation / Operating Manual Further Accessories as Shown in Pictures Condition Used Optical Condition as Shown in Pictures Scope of Delivery as Shown Inspection Possible by Appointment Safety Note For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Due to the size and weight, shipping by freight forwarder is recommended. Scope of delivery as shown. Subject to change and errors in the technical data, as well as prior sale.

Condition: good (used), H. Köhler HK 320 BF Kesternich Testing Device Manufacturer: H. Köhler KG Type: HK 320 BF Device Type: Kesternich testing device / Corrosion testing chamber Made in Germany Corrosion testing device for performing Kesternich tests under a sulfur dioxide-containing atmosphere to evaluate the corrosion behavior of materials and coatings. Technical Data Test chamber volume: approx. 300 liters Internal dimensions (W x D x H): approx. 725 x 500 x 750 mm External dimensions (W x D x H): approx. 1070 x 570 x 1970 mm incl. base frame Temperature range: Room temperature +5 °C to 60 °C Extendable to approx. 75 °C according to manufacturer's specifications Power connection: 220 V / 50 Hz Power consumption: 1,000 W Compressed air supply: approx. 4.5 - 8 bar required Application Areas Corrosion testing Kesternich test according to the SO₂ method Coating testing Automotive industry Material testing Quality assurance Research and development Equipment Hsdszclxvopfx Agmsnn Stainless steel test chamber with viewing windows Large front door with locking mechanism Test specimen carrier / racks SO₂ gas system Pressure gauge Manual controls Base frame with storage area External control and regulation unit Condition Used device from industrial use. Optical condition according to pictures. Signs of wear and tear due to age and use are present. Test chamber and equipment are largely complete. A complete technical functional test has not been carried out by us. Inspection possible by appointment. Scope of delivery: see pictures. Loading can be organized. All information provided to the best of our knowledge based on nameplates, manufacturer information, and available documents. Errors and changes reserved.

Condition: excellent (used), Liebisch Constamatic S1000M-TR Corrosion Testing System Manufacturer: Gebr. Liebisch GmbH & Co. KG Type: S1000M-TR (4BVL) Made in Germany Corrosion testing system / salt spray chamber for performing salt spray, condensation water, and cyclic climate tests. Technical Data Test chamber volume: approx. 1000 liters External dimensions: approx. 2600 x 1120 x 1255 mm Test chamber dimensions: approx. 1435 x 780 x 600 mm Temperature range, test chamber: ambient temperature to 50 °C Temperature range, humidifier: ambient temperature to 70 °C Hedpezcdyxsfx Agmonn Test solution reservoir: approx. 100 liters Voltage: 230 V Frequency: 50 - 60 Hz Phases: 1~ Rated current: 12 A Power consumption: 2700 W Test methods DIN EN ISO 9227 DIN EN ISO 6270-2 VDA 621 / 415 ASTM B368 MIL STD 202 F-101D VW PV 1210 Equipment Automatic control Temperature control for test chamber and humidifier Salt spray testing Condensation water testing Cyclic climate tests Pressure regulator Manometer Test specimen holders and test rods Reservoir for test solution Large insulated hinged lid with gas springs Condition Used equipment from industrial application. Optical condition according to the images. Interior with visible deposits and color changes due to test media. Control unit is active, the device can be switched on. A complete technical functional test under real test conditions was not carried out by us. Inspection possible by arrangement. Scope of delivery: see images. Loading can be arranged. All information is provided to the best of our knowledge based on nameplates, manufacturer's markings and available information. Subject to errors and changes.

Condition: excellent (used), Weiss WT-1300/70/15 Temperature Testing Chamber Manufacturer: Weiss Umwelttechnik GmbH Type: WT-1300/70/15 Water-cooled temperature testing chamber with touch panel control for temperature tests in research, development, quality assurance, and industry. Technical Data Temperature range: -70 °C to +180 °C Test chamber volume: approx. 1340 liters Temperature change rate (heating): 15 K/min Temperature change rate (cooling): 10 K/min Temperature deviation (over time): ± 0.1 to ± 0.5 K Temperature homogeneity (spatial): ± 0.5 to ± 2 K Test chamber dimensions: Height 920 mm Width 1100 mm Depth 1330 mm External dimensions: Height approx. 2050 mm Width approx. 1300 mm Depth approx. 3200 mm Permissible test specimen load: Test chamber floor: 150 kg Insert shelf: 50 kg Electrical Data Rated voltage: 3/N/PE AC 400 V ±10 % 50 Hz Rated current: 63 A Rated power: 44 kW Refrigeration System Refrigerant R404A: 14.0 kg Refrigerant R23: 5.4 kg R404A LP max.: 18 bar R404A HP max.: 25 bar R23 LP max.: 19 bar R23 HP max.: 25 bar Standing pressure: 18.5 bar Equipment Touch panel control Stainless steel test chamber Multiple insertion levels Side access port Heated door seal Water-cooled refrigeration unit CEE connection CE marking Weight: approx. 1500 kg Condition Used equipment from industrial application. Optical condition as shown in the pictures. For the safety of our customers, the following work will be carried out on the offered climate chambers beforehand: 1. Functional check and replacement of necessary components Hodpfjza Dv Iox Agmonn 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Scope of delivery: see pictures Shipping or freight transport possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Year of construction: 2019, condition: excellent (used), Memmert ICH 750 L eco – ex demo (2019) – L version with lighting We offer a Memmert ICH 750 L eco climate chamber, L version (with lighting), from 2019. This unit comes directly from the manufacturer's showroom and has been used very little. It is in very good technical and visual condition. Key features: * Model: ICH 750 L eco (L version – with lighting) * Year: 2019 (ex demo) * Capacity: approx. 750 liters Hedpeymy Utjfx Agmenn * Temperature range: * without humidity: 0°C to +60°C * with humidity: 0°C to +60°C * Humidity range: 10–80% RH * Energy-efficient ECO cooling system * Digital controller with intuitive operation * Stainless steel chamber L version – lighting: * Integrated lighting system (light + UV) * Ideal for photostability testing (e.g., according to ICH Q1B) * Uniform illumination of samples * Possibility of operation in day/night cycles Equipment and advantages: * Precise temperature and humidity control * Very good uniformity of conditions within the chamber * Quiet and stable operation * Reliability and high-quality Memmert construction Condition: Ex demo unit – minimal signs of use, fully functional, tested before sale. Additional information: Upon request, we can send photos, a video of the unit in operation, or conduct an online presentation. 9-month warranty on spare parts for the unit.

Condition: used, Year of construction: 2015, Pfeiffer LTS-KKB/120 Helium Leak Test Chamber (2015) 3x400V/50Hz/3x100A 7700kg weight Hsdpfx Agoy Uxncemonn

Year of construction: 2022, condition: like new (used), Memmert ICH 750 chamber from 2022, like new. Demonstration unit with a one-year warranty on spare parts. Hnjdpfxozam H Aj Agmon Description: Temperature setting range -10 to +60 °C Operating temperature range from -10°C to +60°C without humidity (not suitable for long-term storage at temperatures below zero. Ice may form on the glass door during continuous operation) Operating temperature range from +10°C to +60°C with humidity and/or light Temperature setting accuracy 0.1 °C Temperature sensor 2 Pt100 DIN Class A sensors in a 4-wire circuit for mutual monitoring, taking over functions in case of a failure Humidity Humidity humidity supply using distilled water from an external tank via a self-priming pump Humidification humidification using a hot steam generator Humidity active humidification and dehumidification of the air, adjustable in the range of 10-80% relative humidity with a digital display of relative humidity - display resolution 0.1%, setting accuracy 0.5%

Year of construction: 2021, condition: like new (used), Memmert ICH 260 chamber, manufactured in 2021, in like-new condition. This unit was used for display purposes. Hjdszam Hvopfx Agmenn One-year warranty on spare parts. Manufacturer’s description: Operating temperature range without humidity: 0 to +60 °C Temperature setting range 0 to +60 °C Operating temperature range +10 °C to +60 °C with humidity and/or light Temperature setting accuracy 0.1 °C Temperature sensor 2 Pt100 DIN Class A sensors in a 4-wire circuit for mutual monitoring, taking over the function in case of an error Humidity Humidity humidity supply using distilled water from an external tank via a self-priming pump Humidification humidification using a hot steam generator Humidity active humidification and dehumidification of the air, adjustable in the range of 10-80% relative humidity with a digital display of relative humidity - display resolution 0.1%, setting accuracy 0.5%