Used Vibratory Finishing System: Service Scheduled In 2026 for sale (56,950)

Condition: used, WALTHER TROWAL circular trough vibratory finishing machine, type CLS-980 SA Serial No. 15.207, Year of manufacture 1972 Trough diameter 1850 mm Total outer height of trough approx. 1150 mm Working container / gross volume max. 980 liters Usable volume approx. 490 liters Largest possible workpiece diameter approx. 300 mm (measured diagonally) Screen area 3400 cm2 Speed 1000 to 1700 rpm, stepless Motor power 22 kW Mains connection 400 volts, 50 Hz - Operating time adjustable manually and via timer - Stepless motor speed adjustment via DANFOSS drive controller, type VLT 3032 (frequency inverter) - Manually adjustable eccentric balance weights - Container with rubber lining - Sound-insulated cover with pneumatic cover opening - Manual separating flap - Integrated screen separation device after the separating flap - Liquid connection - Material outlet opening 470 x 300 mm - Control cabinet and drive controller for wall mounting - Partition cover with perforated screen Hedpfx Aqedzqn Dstsu - 1 crate of pyramid-shaped grinding media Space requirement L x W x H 3000 x 3000 x 2550 mm Transport dimensions L x W x H 2300 x 3000 x 2550 mm Weight 2500 kg Good condition Functional description: Workpieces and grinding media are set in motion and gently tumbled by the generated vibration. The constant relative movement between the workpieces and the grinding media causes deburring and surface finishing of the workpieces.

Condition: excellent (used), Sold with special "warehouse clean" discount price! Duplo iSaddle Digital bookletmaker DSF-2200 Sheet Feeder DBMS-F2 DBMS-S DBMS-T DKT-200 DKT-LS Hedpex U Tkrefx Aqteu Spinemaster

Condition: used, Year of construction: 2024, operating hours: 300 h, functionality: fully functional, 1. MERKUR Airless Pump 45:1 Ratio: 45:1 Maximum fluid output pressure: 310 bar Maximum air inlet pressure: 6.2 bar Fluid flow at 60 cpm: 3 lpm Volume per cycle: 50 cc Air consumption at 7 bar and 20 cpm: 0.48 m³/min Fluid inlet: ¾” Fluid outlet: 3/8” Includes: wall mount, surge filter, suction hose, suction pipe, suction filter. 2. XTR 5 Airless Manual Spray Gun Maximum fluid pressure: 345 bar Fluid passage: 2.3 mm Fluid inlet: ¼” Weight: 411 g Dimensions: length 111 mm x height 180 mm Wetted parts: aluminium, stainless steel, polyethylene, polyurethane, polypropylene, nylon, acetal, carbide, solvent-resistant O-rings. 3. Mini Merkur Airless 30:1 Ratio: 30:1 Maximum operating pressure: 207 bar Maximum tip size: 0.019” Fluid flow at 240 cpm: 1.5 lpm Air inlet: 3/8” Fluid outlet: ¼” Minimum compressor capacity: 1.5 HP Includes: wall mount, suction hose, suction pipe, suction filter. Key advantages: convertible wall mounting, pneumatic motor, consistent finishes, low air and material/solvent consumption. Hjdpfjyx Irljx Aqteu 4. Silver Plus Airless Manual Spray Gun Maximum fluid pressure: 345 bar Fluid inlet: ¼” Weight: 510 g Wetted parts: stainless steel, polyethylene, polyurethane, nylon, Teflon. 5. Product Hoses with Stainless Steel Braid Braid: AISI 304 Inner tube: Teflon Applications: chemicals, solvents, steam. Length: 10 metres Diameter: ¼"

Condition: used, Manufacturer: SPALECK Drum diameter: 1100 mm Hedjy Nlmbopfx Aqtsu

Condition: like new (used), For industrial use, tumbler loading systems are commonly utilized across various industries such as the food industry (especially bakery and meat processing), pharmaceutical industry, chemical industry, and others where precise mixing, rotation, or material processing is required. These machines offer high capacity, accuracy, and safety within automated production lines. High Capacity Adjustability Automatic Loading and Unloading Systems Temperature and Humidity Control Drive System Hodpfx Aozbk R Ijqteu Materials and Construction Safety Systems Integration with Automated Systems Adaptability and Flexibility Energy Efficiency

Condition: good (used), Paint unit, paint pump GRACO MERKUR + Graco G40 gun. Hsdoulc S Rspfx Aqtsu

Year of construction: 2014, condition: excellent (used), functionality: fully functional, Complete 'Bag-in-Bag' forming system, previously used to produce multipacks of crisps. System comprises of: 1 x Feed hopper and steps/gantry. 1 x Comek s.r.l. infeed swan-neck / 'Z' conveyor. Manufacturer – Comek s.r.l. 1 x Comek s.r.l. / Propema VPB 400 vertical form, fill and seal bagging machine. Manufacturer – Comek s.r.l./Propema S.r.l. Date of manufacture – 2014. Sealing jaws - 380mm horizontal & 620mm vertical. Film width - up to 810mm wide. 1 x Markem Imaje SmartDate X65 128mm thermal transfer printer. Manufacturer – Markem-Imaje. Date of manufacture – 2021. 1 x Flash label applicator (never used / required for seller's products). Hjdpfx Aqoyvac Aetsu 1 x Hole punch (3mm) to help deflate the multipack bags into large boxes. 1 x Comek s.r.l. outfeed inclined conveyor. Manufacturer – Comek s.r.l. Belt width - 400mm wide. Conveyor length - 1800mm long. 1 x 1.2m diameter stainless-steel Lazy Susan / rotary packing table. Height - 750mm (height-adjustable feet). This system was producing bulk multipack bags of 3 x different flavours of bags of crisps. Speed - up to 18 packs/minute. Footprint of system - 7.3m long x 2.7m wide x 3.5m high (infeed conveyor to lazy susan).

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand “Plockmatic SD-500” booklet-making system Item for sale: 1 x Plockmatic SD-500 with the following equipment: incl. SD BM Booklet Maker incl. SD-BF Bookfold incl. SD RCT Rotate Crease Trim incl. SD-BF Bookfold Meter readings: Total: Approx. 4187 Hsdpszz Rp Aofx Aqtju Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or yellowing). The machine has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the machine during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, Polishing machine, TROMA Model T 60-1 - Capacity: 60 liters - Stepless speed control via frequency inverter - Trough diameter: 680 mm - Overall height: 750 mm - Drive power: 1.1 kW - Drain valve - Total weight: 110 kg Hedszzqa Ijpfx Aqtou Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, paper weight (min.): 65 g/m², paper weight (max.): 300 g/m², product length (max.): 320 mm, product width (max.): 620 mm, TECHNICAL DETAILS Minimum paper size: 120 × 210 mm Maximum paper size: 320 × 620 mm Paper weight: 65–300 g/m² Booklet heads: 2 ISP booklet heads Maximum book thickness: 10 mm Maximum page count: approx. 200 pages at 80 g/m² Hodpjzzp Scsfx Aqteu Staples per spool: approx. 50,000 EQUIPMENT Plockmatic Morgana BM 5050s Booklet Maker VFX high-performance feeder with vacuum feeder CST 5000 creasing and 2-sided trimming module for head and foot trimming FM 5000 finishing module for front trimming BEST 4000-1 extended conveyor stacker Anti-static kit for VFX feeder Anti-static kit for CST 5000

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 71400, For sale is a RÖSLER Rotomatic R 150/15 SE, including a separation station, conveying technology, control cabinet, and control system. This unit comes from our ongoing production facility and was dismantled solely due to a plant upgrade. The unit is fully functional, ready for immediate use, and can be inspected and demonstrated in operational condition by appointment. Technical data Manufacturer: RÖSLER Oberflächentechnik GmbH Model: Rotomatic R 150/15 SE Machine type: Continuous belt grinding machine Year of manufacture: 2016 Serial number: 71400 Working channel length: 15 m Total power: 17 kW Main drive: 12.5 kW Equipment Complete system including: Rotomatic R 150/15 SE Separation station Workpiece conveyor belt Grinding media return system Control cabinet with PLC control Pneumatic and process water technology Automatic continuous operation Integrated workpiece/grinding media separation Variable processing time Designed for continuous industrial operation Application areas Ideally suited for: Deburring Rounding Smoothing Cleaning Surface finishing Belt grinding of mass-produced parts Suitable for workpieces made of: Steel Stainless steel Aluminum Brass Zinc die casting Hjdpszizu Ejfx Aqtju Sintered and stamped parts The Rotomatic is particularly suitable for the continuous processing of large quantities and can be easily integrated into automated production lines. The Rotomatic principle ensures that sensitive workpieces are processed particularly gently and according to the first-in-first-out principle.

Condition: excellent (used), functionality: fully functional, overall weight: 277 kg, total width: 650 mm, total length: 1,940 mm, total height: 1,050 mm, input voltage: 220 V, Plockmatic Production Booklet Maker (PBM) 350, including the (SquareFold) BookFold Module and Trimmer Module. This booklet maker is in very good condition! The machine can be used offline, as shown in the photo, or connected to a machine from the Ricoh Pro 8100/8200, C7100/C7200, or C9100/C9200 series. Counter readings: PBM 350: 225,000 BookFold Module: 148,000 Trimmer Module: 237,000 Produces professionally finished booklets, both in-line and offline, with stapling and folding. Capacity: up to 35 sheets of paper (80 g/m²) for folded booklets of approximately 140 pages. Supported paper sizes: width of approximately 206 mm to 320 mm, length up to approximately 457 mm. Suitable for A and B formats and various custom formats. Are you looking for other options for this machine? We are flexible and can customize the machine to your requirements! This machine has been inspected and thoroughly tested by our own specialized technical service department. Hedpfx Aqsz Attaotsu Would you like more information? Please feel free to contact us. Worldwide shipping is possible.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 24F104, Graco PROMIX 2KE – Demonstration unit, fully functional For sale is a used, fully functional Graco PROMIX 2KE, pump ratio 30:1, IS, AA, from our demonstration stock. Manufacturer: Graco Model: PROMIX 2KE, pump ratio 30:1, IS, AA Item No.: 24F104 Condition: used, fully functional, demonstration unit Offered for sale as part of a stock clearance. A great opportunity to acquire a proven, little-used Graco system at attractive conditions. Notes on the sale: Sale exclusively to business customers. No sale to private individuals. Sale and delivery exclusively within the EU – no sale to non-EU countries. Delivery conditions and shipping costs are determined individually and by agreement. The sale is made with the exclusion of any warranty. If you have any questions, we will be happy to assist you. Hsdjzwk H Hjpfx Aqteu

Condition: excellent (used), Lasermax LX550 Roll Feed System with LX581 Module Roll-fed digital print finishing system Designed for continuous-feed digital printing applications Automatic web feeding and tension control Integrated touchscreen control High-volume production capability Suitable for transactional, direct mail and book production workflows Modular system design Made in Sweden Technical Data LX550 Power supply: 230 V, 1-phase, 50 Hz Power consumption: 1800 W Rated current: 10 A LX581 Power supply: 200–240 V, 1-phase, 50/60 Hz Power consumption: 1200 W Hodpfszaq Rfsx Aqteu Rated current: 10 A Circuit breaker: 15 A Machine Information LX550 Serial No: 09LX550034 LX581 Serial No: 09LX581002

Condition: used, Year of construction: 2022, operating hours: 360 h, functionality: fully functional, machine/vehicle number: 521080, total height: 3,780 mm, total length: 10,800 mm, total width: 5,160 mm, volume flow: 27,000 m³/h, type of input current: AC, inner dimension height: 3,000 mm, inner dimension length: 10,000 mm, inner dimension width: 5,000 mm, input voltage: 400 V, space requirement height: 3,780 mm, space requirement length: 10,800 mm, Equipment: cabin, documentation/manual, emergency stop, lighting, DURST combined painting and drying system D-LTA 30/30-ü-natural gas – Year of manufacture 2022 For sale is a high-quality combined painting and drying system from the manufacturer DURST, type D-LTA 30/30-ü-natural gas, year of manufacture 2022. The system is in very good and well-maintained condition and is suitable for the professional processing of both conventional and water-based paints. It can be used flexibly in spray and drying operations and features a powerful supply and exhaust air system, natural gas heating, heat recovery, and a modern PLC and frequency inverter control system. Technical highlights and features: • Manufacturer: DURST Lackier- und Trocknungsanlagen GmbH • Type: D-LTA 30/30-ü-natural gas • Year of manufacture: 2022 • Design: combined painting and drying booth • Booth internal dimensions: approx. 10,000 × 5,000 × 3,000 mm • Booth external dimensions: approx. 10,800 × 5,160 × 3,080–3,780 mm • Air flow rate: approx. 27,000 m³/h for both supply and exhaust air • Motor power of ventilation: 2 × 11 kW • Total electrical connection: approx. 25 kW • Heating power: up to approx. 250 kW • Heating: direct gas surface burner, natural gas • Drying temperature: up to approx. 70 °C • Air changes: approx. 180 times • Air velocity: approx. 0.50 m/s • Heat recovery via cross-flow heat exchanger • Manufacturer's specification for heat recovery: approx. 47 % efficiency on average per year, up to approx. 80 % recovery factor under optimal conditions • DURST EcoTronic system with frequency-controlled fan control • Operating modes including spray operation, partial load operation, stand-by operation, and hall heating operation • HPS heating program control for efficient drying, especially for water-based paints • PLC control with frequency inverters and monitoring devices • Remote maintenance module • LED ceiling lighting, Ex-Zone 2 • Illumination level approx. 1,090 Lux • Rear extraction wall with paint mist separator • Pre- and post-filtration of the supply and exhaust air • Partial filter ceiling with fine dust filtration • Sectional door and two partially glazed emergency exit doors • Insulated, double-walled booth housing with 80 mm mineral wool panels In spray operation, the system operates in fresh air/exhaust air mode. The drawn-in fresh air is filtered and heated via the gas surface burner. The exhaust air is passed through the paint mist separator and post-filtration. In drying operation, the system operates primarily in recirculation mode with a fresh air proportion of approx. 10 %. The integrated HPS control system enables energy-efficient and uniform drying and is particularly interesting for processing modern water-based paints. Another significant advantage is the integrated heat recovery system, which allows a considerable amount of the heat contained in the exhaust air to be fed back into the process. Hsdpfx Aqozubtlstsu The system dates from 2022 and is in very good condition. Due to the generous booth dimensions, the high air flow rate and the extensive control and energy technology, it is ideally suited for industrial and commercial painting applications. Further technical documents and documentation for the system are available and can be provided upon request.

Condition: excellent (used), overall weight: 277 kg, total width: 650 mm, total length: 1,940 mm, total height: 1,050 mm, input voltage: 220 V, Plockmatic Production Booklet Maker (PBM) 350, including the (SquareFold) BookFold Module and Trimmer Module. This booklet maker is in very good condition! The machine can be used offline, as shown in the photo, or connected to a machine from the Ricoh Pro 8100/8200, C7100/C7200, or C9100/C9200 series. Counter readings: PBM 350: 187,000 BookFold Module: 176,000 Trimmer Module: 207,000 Produces professionally finished booklets, both inline and offline, with stapling and folding. Capacity: up to 35 sheets of paper (80 g/m²) for folded booklets of approximately 140 pages. Supported paper sizes: width of approximately 206 mm to 320 mm, length up to approximately 457 mm. Suitable for A and B formats and various custom sizes. Are you looking for other options for this machine? We are flexible and can customize the machine to your requirements! This machine has been inspected and thoroughly tested by our own specialized technical service department. Hodpfx Aoz Atuqeqtsu Would you like more information? Please feel free to contact us. Worldwide shipping is possible.

Condition: used, Profile Deburring Machine, Finishing Machine, Vibratory Bowl Finisher, Vibratory Polishing Machine, Used Machine Manufacturer: Vibrochimica Type: VBT-2E 650/3 Overall dimensions: 2260 x 1870 x 1450 mm Year: 2002 Weight: 1160 kg Electrical data: 400 V; 5.5 kW Hedpfx Aqoy R Eclotou d: 840 mm D: 1360 mm Torus Ø: 430 mm The surface of the Pu lining is damaged and in a repaired condition. Recorded in pictures.

Condition: ready for operation (used), Gross volume: 120l, max. swivel element: 2560mm, diameter working container: 640mm, discharge height screening machine: 880mm, connected load: 11kW, drive power rotary table 4kW, length: 2620mm, width: 2620mm, height: 2320mm. An on-site inspection is possible. Hjdpfx Aqoy E S Evotou

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, working width: 600 mm, input voltage: 400 V, overall weight: 3,560 kg, workpiece height (max.): 170 mm, The fast deburring machine for deburring, rounding and finishing steel cut parts up to 600 mm wide. This Q-Fin deburring and finishing machine was developed especially for applying a large radius of up to 2 mm on steel sheet. With the SER600 Super Edge Rounder from Q-Fin it is possible to deburr, grind, edge break, round off, remove slag, remove oxide skin or apply a line finish to sheet metal up to 600 mm wide. A combination of these operations is also possible. The throughput of the SER600 is 3 to 5 times higher than comparable machines. This new 2024 machine is equipped with magnetic support, making it suitable for processing steel cut parts and other magnetic materials. This machine is equipped with as many as 5 machining stations. Easy operation through an HMI touch screen on the front of the machine. The first station of the SER600 consists of a grinding unit. The grinding belt of this unit removes burrs and/or burn-in points from the product surface. If you have no burrs, you can leave the grinding belt off or remove them. It is also possible to apply a line finish to your product with a finer grinding belt or finish with a scotch-brite belt. The second and the third station consists of the disc brush unit containing 4 oscillating disc brushes. The fourth and the fifth station consists of 2 round brushes, rotating counterclockwise and clockwise. With the brushes you remove the sharp edges of the product by breaking the edges or, by the unique combination of two brush systems, edge round them with a radius up to R=3 mm. The installation of special brushes makes this SER600 with magnetic system also very suitable to remove the oxide skin of steel products or slag from plasma cut products. We sell the combination with a WES6000 wet working grinding dust extraction system as 'SER600 Set'. The WES6000 was developed by Q-Fin to extract grinding dust safely and without pressure loss. This fully stainless steel extraction system is a wet-acting system that extracts grinding dust from stainless steel, steel and aluminum, eliminating the risk of fire and explosion. According to Q-Fin, it is the safest, easiest and most durable way to extract grinding dust. No more grinding dust in the air and/or work environment with the WES6000. At this moment we have two SER600 machines in stock: 1x new (built year 2025) 1x used for only a few months; as new. built year 2024. Both machines can be viewed by appointment in Bergeijk. Both machines have a 1 year warranty on construction and all non-wearing parts. We can also provide on-site installation of the SER600 + WES6000) including training for the operators. Hjdpel Dw D Eofx Aqtou - Connected load SER600 machine: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Condition: new, Year of construction: 2026, The ERBA Turbo 60 is a centrifugal finishing machine for deburring, smoothing, and polishing small to medium-sized workpieces. The machine features a digital process timer, a digital speed display, and a dosing pump (wet version). The disc speed can be adjusted via a frequency inverter. The Turbo 60 is available in both wet and dry versions. It can be ideally linked with the ERBA YE-60 separation conveyor shown in the images. Hodpsyq Rhljfx Aqtsu Technical data: - Gross volume: 60 liters - Drive power: 3.0 kW - Disc speed: 75 to 300 rpm - Optionally equipped with tilting motor, soundproof lid, or separation box As an experienced partner, we provide you with expertise in the field of vibratory finishing. Together, we develop efficient solutions for your optimal process results. All prices are net plus the applicable VAT and shipping costs. The pictures may show the system with accessories that are available optionally and subject to additional charges. If you are interested, we look forward to hearing from you. We are happy to provide you with advice without obligation. The European Commission provides a platform for online dispute resolution (ODR platform). This offer is solely intended as an online presentation of our goods. The contractual negotiation takes place via telecommunication (email, phone, messaging portal). In the first step, we will send you a non-binding offer, which includes information about our general terms and conditions, legal notice, and the right of withdrawal, before a purchase/contract is concluded.

Condition: new, Year of construction: 2026, Machine type: EVP 550 Manufacturer: ERBA Power kW: 4.0 Total volume: 585 l Description: The ERBA EVP 550 vibratory finishing machine features a flat-bottomed process bowl without an integrated separation unit. Emptying and separation are done via a manual or pneumatic bottom discharge system. Upon request, the machine can be equipped with reinforced suspension and a heavy-duty motor for increased loads. The motor speed can be infinitely adjusted via frequency inverter (optional). An optional fully-automatic PLC control system can also be installed. Hedpfx Aqjyq Rhxotsu ERBA vibratory finishing systems are renowned for their durability and longevity, largely due to the hot-cast polyurethane lining of the process bowl. As an experienced partner, we provide expertise in all aspects of vibratory finishing. Together, we develop efficient solutions to ensure optimal process results tailored to your requirements. All prices are net, plus the applicable VAT and freight charges. Accessories shown in the images may be optionally available and are subject to additional costs. If you are interested, we look forward to hearing from you. We are happy to provide you with non-binding advice. The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer is intended exclusively as an online presentation of our goods. Contract negotiations are conducted via telecommunications (e-mail, telephone, message portal). As a first step, we will send you a non-binding offer, which also includes our general terms and conditions, imprint, and information on the right of withdrawal, prior to any purchase or contractual agreement.

Condition: new, Year of construction: 2026, The ERBA Separation Conveyor YE-60 is designed for separating workpieces and grinding media. It can be used as a mobile standalone machine or in combination with other machines, such as the ERBA Turbo (centrifugal system). The separation bed can be quickly and easily replaced to suit various requirements. An optional frequency inverter can be installed, allowing stepless adjustment of the motor speed. The YE-60 can be equipped with many optional features to simplify the separation process, such as a magnetic separator for small parts, a wash nozzle, or a parts hopper. Technical Data: - Gross volume: 60 liters - Motor output: 0.3 kW - Weight: 140 kg - Screen area dimensions: 1,000 x 500 mm - Installation dimensions: 1185 x 540 x 575 mm (L x W x H) Hsdpfx Aqeyq Rhretsu As an experienced partner, we provide you with expertise in all aspects of vibratory finishing. Together, we develop efficient solutions tailored to your optimal process results. All prices are net plus the currently applicable statutory VAT and shipping costs. The images may show the system including accessories that are optionally available and subject to additional charges. If you are interested, we look forward to hearing from you. We are happy to offer advice with no obligation. The European Commission provides a platform for out-of-court online dispute resolution (OS platform). This offer serves exclusively as an online presentation of our goods. Contract negotiations are conducted via telecommunication (e-mail, telephone, message portal). In the first step, we will send you a non-binding offer, together with information about our general terms and conditions with imprint and the right of withdrawal, before any purchase/contract is concluded.

Condition: used, Year of construction: 1998, functionality: fully functional, Vibratory Finishing Bowl WALTHER TROWAL CD 200 Capacity: 200 L Year of construction: 1998 Coating in good condition (see photos) Bowl dimensions: Ø 1000 mm Width of the opening: 250 mm Maxi pieces height: 250 mm Motor: 2 speeds Motor rotation: 1450 RPM 2 possible speed ranges: high speed + low speed Manual hatch Independent electrical panel Equipped with 1 product dosing pump system Hedjzww Tyjpfx Aqtsu Voltage: 380 V Dimensions (L x W x H): 1400 x 1000 x 1300 mm Weight: approx 600 kg

Condition: used, Year of construction: 2018, functionality: fully functional, Used Horizon Booklet Making System (2018) 1. System Configuration Hodpfszl Nivox Aqteu VAC-1000, BC-20, SW-20, SPF-200A, HP-200A, FC-200A, SC-200 Interface Language: Japanese 2. Machine Overview The Horizon VAC-1000 Booklet Making System is designed for high-quality booklet production from offset or digitally printed sheets. It offers reliable feeding, precise collation, and professional booklet finishing, making it suitable for commercial printers and digital print shops. 3. VAC-1000 Air Suction Collator (Specifications) Model: Horizon VAC-1000 Feeding System: Air Suction Rotor Feeding Number of Bins: 10 Bins (Expandable) Maximum Sheet Size: 350 × 500 mm Minimum Sheet Size: 148 × 148 mm Maximum Speed: Up to 9,900 sets/hour (10-bin configuration) Features: Double-feed detection, Block Feed, Cover Feed, Wireless Remote Control Power Supply: Single Phase 200 V, 50/60 Hz 4. SPF-200A Stitcher & Folder (Specifications) Function: Saddle Stitching & Folding Maximum Sheet Size: 356 × 508 mm Minimum Sheet Size: 120 × 180 mm Maximum Stitch Thickness: 4 mm (Approx. 48 sheets of 64 gsm paper) Production Speed: Up to 4,500 booklets/hour (A5) Up to 4,000 booklets/hour (A4) Stitch Modes: Saddle Stitch, Top Stitch, Corner Stitch, Fold Only Compatible Units: VAC-1000, HP-200A, FC-200A, SC-200 Power Supply: Single Phase 200 V, 50/60 Hz

Condition: ready for operation (used), Profile Deburring Machine, Finishing Machine, Vibratory Bowl Finisher, Vibratory Polishing Machine, Used Machine Manufacturer: Vibrochimica Type: VBT 2E 650 Overall dimensions: 2260 x 1870 x 1450 mm Year: 2005 Hsdpfxoyycc Ie Aqtju Weight: 1160 kg Electrical data: 400 V; 5.5 kW d: 840 mm D: 1340 mm Torus Ø: 430 mm