Used Teka Scraper for sale (690)

Condition: excellent (used), pressure: 3 bar, temperature: 134 °C, type of input current: three-phase, input voltage: 400 V, usable tank capacity: 2,500 l, Used Becomix production plant consisting of main mixer RW2500 and pre-mix vessel AB1200 for mixing, dispersing, homogenizing and emulsifying on an industrial scale. Originally used for sterile skin care products. Very good condition, complete factory overhaul planned (new seals, piping, pneumatics and control, homogenizer and drives overhauled), new stainless steel platform included. MAIN MIXER RW2500 • Working volume approx. 600–2,500 L, total volume approx. 3,458 L, 316L mirror polished • 0–3 bar, vacuum to -1 bar, up to 134 °C, jacket, TÜV approved • Anchor agitator with PTFE scrapers approx. 30 kW, rotor-stator homogenizer approx. 45 kW (5–25 m/s) • Recirculation line DN100, hydraulic lid PRE-MIX VESSEL AB1200 • Working volume approx. 400–1,200 L, turbo agitator, two-zone heating, transfer line FURTHER EQUIPMENT Lhjdpe Ad H Iqjfx Ab Aen • CIP for both vessels incl. CIP rack, CIP/SIP capable, aseptic valves • Water ring vacuum pump approx. 200 m³/h, powder suction and liquid dosing • New Siemens PLC with touch panel, recipe control, GMP documentation SERVICE • Turn-key installation and commissioning available • 12 months warranty (excluding wear parts) Inspection in Weyhe near Bremen, Germany, by appointment. Questions or more photos? Simply send us an inquiry. Offer subject to prior sale by an independent dealer, not affiliated with the manufacturer.

Condition: used, Year of construction: 2011, functionality: fully functional, nominal heat output: 850 kW (1,155.68 HP), tank capacity: 7,350 l, Equipment: documentation/manual, hot water, type plate available, Hot water boiler system Polzenith 850 kW – Year of manufacture 2011 – fully functional For sale is a hot water boiler system from the manufacturer Polzenith, manufactured in 2011. The system is currently in operation and fully functional. It will be available from mid-2027. Technical data • Manufacturer: Polzenith • System type: Hot water boiler system • Machine type: 05.617 • Year of manufacture: 2011 • Rated thermal output: 850 kW (more depending on the fuel) • Water volume: 7,350 liters • Special function: LUVO 3 (oxygen control via lambda sensor) • Electrical connection power: 55 kW / 125 A • Electrical rated power: 58 kW / 120 A • Electrical documentation: available • Operating condition: fully functional, currently in operation • Overall condition: The system is in used condition, appropriate for its age. • Expected availability: from mid-2027 Lodpfxs Aaz Eco Ab Aehn Scope of offer The following system components are included in the offer: • Hot water boiler • Chimney • Ash auger & scraper (without container) • Fuel feed system • Fuel bunker with four hydraulic slides • Pressure maintenance • Automatic make-up water supply Not included in the offer • External water storage tank • Dismantling of the system and all components • Transport and delivery Dismantling and collection The dismantling of all components will be carried out on site by the buyer. The handover of the system is expected to be possible from mid-2027 after prior coordination. Inspection and contact An inspection of the system is possible after prior appointment arrangement, as long as it is still in operation. If you are interested or have any questions, please do not hesitate to contact us.

Condition: good (used), Storage location: 3108 Manufacturer: TEKA Year of manufacture: 2012 Operating hours: 5,618 h Type: Strongmaster IFA Serial number: 6907210061062 Airflow rate: 3,000 m³/h Ledpfey T Uxnox Ab Ashn Outrigger length (approx.): 3,000 mm Features: mobile Accessories: new filter insert Connection: 1.1 kW, 400 V Weight: 160 kg Dimensions: 800 x 800 x 1,500 mm (without hose) Hose length: approx. 4,000 mm

Condition: ready for operation (used), Year of construction: 1998, Scraper capacity 20m: 108m³/h, outreach: 20m, boom angle of attack: 15°, slewing radius: 2080mm, clearing bucket width: 1170mm, volume: 1050l, steep angle: 320°, max. tractive force: 62kN, max. load torque: 322kNm, connected load: 47kW. Machine dimensions X/Y/Z: approx. 3200mm/2150mm/2350mm, weight: approx. 4600kg. On-site inspection is possible. Lhedpfx Asvf Iz Usb Ajn

Year of construction: 2012, condition: used, Feed speed: 18-25m/min, with FK11 max. 20m/min, working height: approx. 950mm, max. workpiece thickness: 60mm, edge banding material rolls: approx. 0.3-3mm, edge banding material strips: approx. 0.4-6mm, max. roll diameter: 830mm, machine length: approx. 7845mm, operating hours: 25724h, feed operating hours: 3371h, machining time: 412h, control system: HOMAG powerControl PC22. Annual production: between 15000 and 22000 linear meters per year. Equipment: Top/bottom release agent spraying unit, joint trimming unit, glue application unit, 2-roll edge banding magazine, pressure zone, end trimming unit HL81, pre-milling unit BF10, profile trimming unit FK11, profile scraper PN10, finishing unit with glue joint scraper and buffing unit, preparation for HOMAG laserTec, powerControl PC22 with touchscreen, automation packages. In addition, scrapers for both 2mm and 1mm edges are available. Equipment: Extensive range of processing units including joint trimming, glue application unit, 2-roll edge banding magazine, end trimming, pre-milling and profile trimming units, profile and glue joint scrapers, buffing unit and spraying systems. HOMAG powerControl PC22 with touchscreen, automation packages and preparation for laserTec. Scrapers for 1mm and 2mm edges available. Special feature: PUR retrofit in 2023 with GP Service EasyPUR AC-34 and RIEPE spraying system LP289/99 (24V retrofit). The machine is in good, well-maintained condition, fully functional, in operation and has been serviced annually by HOMAG. Documentation available. Inspection possible by arrangement. Lsdpfxs Aba Rte Ab Aehn

Condition: good (used), Year of construction: 2017, functionality: fully functional, input voltage: 400 V, input current: 41 A, input frequency: 50 Hz, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: electric, feed rate X-axis: 25 m/min, total length: 12,000 mm, total width: 3,000 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, We offer this used HOMAG KAL370 AMBITION 2474 edgebander with material handling system, year of construction 2017. Type: KAL370 AMBITION 2474 Machine number: 0-200-04-6745 Year of manufacture: 2017 year Technical data and configuration: - edgebanded meters: 1 143 000 m - sizes: the edgebander is 8,4x1,2 m, together 12x3 m - touch screen monitor with Power Touch control, Dell PC - USV unit - infeed speed: 16-25 m/min, with corner rounding unit maximum 20 m/min - automatic thickness adjustment between 8-60 mm - top pressure system with rubber belt (the belt changed in the beginning of 2025.) - separating/lubricating spray units: at front side, at the pressure rollers, before sawing unit, before glue scraper unit - additional infeed table for narrow workpiece infeed - premilling unit, manually adjustable - workpiece preheating unit (completely renovated in 2026.) - QA65 glue pot with manually adjustable glue gates - the machine is used now with EVA hotmelt glue - Robatech glue premelting unit for PUR glue - automatically adjustable edge pressure zone, edge thickness: 0-3 mm - edge magazine with one edge capacity, edge infeed with servo drive motor - edge material height adjustment manually - PK25 snipping saws with 3 functions - rough trimming unit - FK11 trimming/ corner rounding unit with R2 diamond tool and automatic adjustment - MN 21multi profile scraping unit with automatic adjustment (fase-R1-R1,5-R2- R2,5-R3) - glue scraping unit FA20 with automatic adjustment - buffing unit - remote control for setup mode - the machine is for sell together with Homag TFU material handling system Lhjdjz E S E Rspfx Ab Ajn - liftable air cushion table for TFU at the infeed area - front side Interroll band motor has changed for TFU in the beginning of 2026. - Including: full documentation and CE certificate, HDD for PC1:1 data save, suction pipes above the machine, tools for tool change The machine is in good condition, regularly maintained and it is still in production. Available immediately. If you have any questions or need more information, feel free to send us a message or give us a call: +36202546770

Condition: used, functionality: fully functional, Year of construction: 2013, Concrete mixing plant, Sipe 1100 Year of manufacture: 2013 Mixer: 1100 l / Output approx. 25 m³/h Mixer has 2 outlets/discharge points 2 x cement silos, each 40 t, with cement screw conveyor Mixing gantry with mixer and fully automatic control system with recipe memory 1 x scraper arm with chain for 2 types of gravel Lhedpfxj Advnmj Ab Asn Installation/commissioning can be offered.

Condition: good (used), Year of construction: 2016, Edge banding machine Manufacturer: Hebrock Type: AKV 3005 DK-F Lhedpjz Hbqljfx Ab Ajn Year of manufacture: 2016 Total edge length processed: 88,570 m Edge thickness: 0.3 - 3 mm Workpiece thickness: 10 - 45 mm Feed rate: 10 m/min Total power consumption: 13.4 kW Overall length: 5,000 mm Gluing unit: Yes Trimming saw unit: Yes Radius flush trimming unit: Yes Corner copying unit: Yes Surface scraper blade: Yes Buffing unit: Yes

Condition: used, Year of construction: 2009, operating hours: 61,894 h, travel distance X-axis: 2,340 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, feed length X-axis: 2,340 mm, feed length Y-axis: 800 mm, feed length Z-axis: 600 mm, nominal power (apparent): 25 kVA, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 3,250 mm, total length: 6,200 mm, total width: 3,700 mm, table width: 750 mm, table height: 930 mm, table length: 1,400 mm, rotary table diameter: 800 mm, rotational speed (min.): 50 rpm, rotational speed (max.): 12,000 rpm, overall weight: 16,000 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 12,000 rpm, spindle nose: SK 40, number of slots in tool magazine: 30, tool length: 330 mm, tool diameter: 80 mm, tool weight: 15,000 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, We offer this used Hedelius RS 80-K-2300 5-axis machining center, manufactured in 2009. Key Data Manufacturer HEDELIUS GmbH Type RS 80-K-2300 Year of Manufacture 2009 Power Requirement / Voltage 29 kW / 400 V / 50 Hz (25 kVA) Total Weight 16000 kg Footprint Length 6.20 m Width 3.70 m Height 3.25 m Control System Program Input HEIDENHAIN Controller iTNC 530 NC Software Version 340490 04 SP4 PLC Software Version RS80_K V1.54 Development Level L4 Operating Hours Control System On 63333 Lsdpfxsz Hx Iho Ab Ajhn Machine On 61894 Program Run Time 28295 Travel Ranges (Total Working Area) X-Axis 2340 Y-Axis 800 Z-Axis 600 Right Working Area (Fixed Machine Table Area) X-Axis 945 Y-Axis 800 Z-Axis 600 Left Working Area (Rotary/Swivel Table Area) (simultaneous machining possible) X-Axis 800 Y-Axis 800 Z-Axis 600 A-Axis +10° / -90° C-Axis 0 - 360° Clamping Surface - Fixed Machine Table Length 1400 Width 750 Clamping Surface - Rotary/Swivel Table Length Ø 800 Width 630 Work Table T-Slots DIN 650 Slot Width 18 / 18 mm Slot Pitch 125 / 125 mm Number 5 / 5 Table Height Fixed Machine Table 930 mm Celox Motor Spindle Manufacturer Kessler Type DMS 100.XL-633.607 Speed Range 50 – 12000 rpm Tool Shank SK 40 Tool Magazine Magazine Capacity 30 tools Max. Tool Diameter Ø 80 mm (with available free slots) Ø 125 mm Max. Tool Length 330 mm Max. Individual Tool Weight 15 kg Total Magazine Weight 450 kg Special Accessories Scraper Conveyor AME GmbH Total Length ≈ 5700 Height ≈ 1760 Depth ≈ 830 Weight 515 kg Band Filter System (High-Pressure Coolant System) Model PS 120 Tank Capacity 780 l Flow Rate 120 l/min Filter Fleece 670 mm 100 m on a roll Length ≈ 2320 Height ≈ 1060 Depth ≈ 850 Weight 515 kg Motor Spindle - Cooling Unit Manufacturer Hyfra GmbH Type Chilly-25-S Machine No. 09010098 Year of Manufacture 2009 Weight 65 kg Control Cabinet - Cooling Unit Manufacturer Pfannenberg Type DTS 7101 SC Model No. 08390173726 Laser Light Barrier Manufacturer BLUM Type P87.0634 Laser System MINI – MICRO - NANO Wireless Measuring Probe Manufacturer HEXAGON Model m&h Radio-wave Touch Probe Type RWP20.50-M Extra KinematicsOpt HEDELIUS Transformation Kit If you have any questions or require further information, please do not hesitate to contact us.

Condition: new, Year of construction: 2026, operating hours: 4 h, functionality: fully functional, power: 15 kW (20.39 HP), overall weight: 1,200 kg, total length: 1,750 mm, total width: 1,200 mm, total height: 1,640 mm, working width: 630 mm, input voltage: 400 V, control cabinet height: 200 mm, control cabinet length: 600 mm, control cabinet width: 600 mm, number of blades: 15, rotational speed (max.): 100 rpm, rotor diameter: 260 mm, rotor width: 630 mm, sieve perforation: 15 mm, type of input current: AC, warranty duration: 12 months, Equipment: documentation/manual, Shredder, wood chipper, and wood shredder: Hacker, MHR630 ecoline The MHR ecoline series comprises robust and energy-efficient wood shredding machines designed for reliable continuous operation in commercial environments. These plug-and-play shredders offer high performance, low energy consumption, and excellent value for money. This makes them ideal for craft businesses, recycling companies, and wood processing companies looking for an economical and powerful solution. The machines are manufactured and directly distributed from our factory in Germany. Advantages: Lhodpfsz R T Sfox Ab Ajn - Continuous, even shredding process - High performance with low energy consumption - Robust construction - Larger feed opening - Excellent value for money - Plug-and-play (5-pin CEE plug, 400V, 32A three-phase current) - Controlled by Siemens PLC - Includes optional scraper bar - MHR630 ecoline Rößler shredder: "Made in Germany"

Condition: like new (used), Year of construction: 2022, operating hours: 458 h, functionality: fully functional, machine/vehicle number: 1536582684A, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, nominal power (apparent): 30 kVA, torque: 83 Nm, workpiece height (max.): 550 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 200 kg, total height: 3,200 mm, total length: 4,500 mm, total width: 3,500 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 12,000 rpm, overall weight: 4,700 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 13 W, number of spindles: 3, number of slots in tool magazine: 30, tool diameter: 80 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, We offer this DMG MORI CMX 50 U universal machining center, in like-new condition. Operating hours: Power-on hours: 458 h / Spindle: 330 h, year of manufacture 2022. TECHNICAL DATA Axis travels: • X = 500 mm • Y = 450 mm • Z = 400 mm • B = -5° / +110° • C = n × 360° Work table: • 630 × 500 mm pivoting rotary table • 7 T 14 H7 grooves, 63 mm pitch • Central hole Ø 30 H6 • Permissible table load: 200 kg • Axis – table distance: 150–550 mm Main spindle (inline spindle): • Speed: 20 – 12,000 rpm • Power: 13 kW (40% DC) / 9 kW (100% DC) • Torque: 83 Nm (40% DC) / 57 Nm (100% DC) • Tool shank: SK40 DIN 69871 • Clamping according to DIN 69872, hydraulic control • Clamping force SK40/BT40: 10 kN Tool magazine: • 30 positions, chain with double gripper • Max. tool diameter: 80 mm (130 mm with adjacent pockets free) • Max. tool length: 300 mm (from the spindle face) • Max. tool weight: 8 kg • Max. magazine load: 120 kg • Tool change time: 2.7 s Feeds and accuracy: • Rapid feed rate X/Y/Z: 30 m/min • Max. feed force (40% DC): 4.5 kN • Linear guide rails with rollers on all axes • Direct measuring system on X, Y, Z (including air purge) • Positioning accuracy X/Y/Z: A = 6 µm (ISO 10791-4) • Repeatability X/Y/Z: R = 5 µm (ISO 10791-4) • Accuracy B/C: A = 16 seconds of arc (ISO 10791-4) • Repeatability B/C: R = 12 seconds of arc (ISO 10791-4) INCLUDED EQUIPMENT Base machine: • CMX 50 U universal machining center (C-A3390F) • DMG MORI SLIMline Multi-Touch 19" / Siemens 840D SL control (C-B3097F) • Coolant or air, switchable via M functions • Chip tray / drawer • Enclosure with sliding door • DMG MORI IoTconnector included as standard 20 bar production package with chip conveyor (C-K3661F): • Internal 20 bar coolant supply • Scraper-type chip conveyor, 250 l tank (left) • Washing of bed and ATC arm via M function • Coolant spray gun • External electronic handwheel • Enclosure roof • 4-color signaling lamp • Double cartridge filter (filter change without stopping the machine) Measurement / monitoring: • Renishaw measuring kit for Siemens (C-K4222F): PP40 probe with optical transmission, TS27R tool probe, measuring cycles with tool breakage monitoring, dummy tool and calibration ring • 3D QuickSET for CMX U (C-K2530F) – control and compensation of 5-axis kinematic accuracy Lhjdpoz Epnvefx Ab Asn Software and documentation: • DXF Import option on Siemens controller (C-G3067F) • Documentation in Romanian • Screen text in Romanian DMG MORI Digital Products: • Digital production package: IoTconnector, machine data connector MDC (OPC UA / MTConnect / MQTT), NETservice (remote diagnostics) • Messenger V4 – machine status in real time • DMG MORI Service Agent – preventive service warning • Machine 3D model in STEP format (upon signing of NDA, for CAD/CAM) NUMERICAL CONTROL – Siemens SINUMERIK 840D SL • TCU30.3 console, NCU720.3B PN • Safety Integrated • 19" multi-touch screen, 1024 × 1280 • Block processing time: 1.5 ms • User memory 16 MB + 4 GB extension (EES) CONNECTIONS • Standard 12,000 rpm: 30 kVA / 47 A / 50 A fuse at 400 V • With 20/40/80 bar package: 32 kVA / 50 A / 63 A fuse at 400 V • Voltage: 400 V / 230 V, 50/60 Hz, ±10% • Air: 6–8 bar, average consumption approx. 30 m³/h

Condition: excellent (used), functionality: fully functional, LIMAS AB / VEB L-1048 & Type 6-76 | Line for slicing (dicing), washing, and weighing vegetables Manufacturer: Limas AB / VEB Maschinenfabrik Bad Gottleuba Model / Type: L-1048 complete with VEB Type 60 drum washer Serial number: L-10-8-01 (slicer) 1204 (VEB washer) Year of manufacture: 2008 (Limas slicer) Power supply: 380 V, 50 Hz VEB washer: power 1.1 kW, protection rating IP44 Lhsdpoz Sfg Dsfx Ab Ajn Line composition: - Limas AB potato slicer (type: 6x76) Serial number: L-10-8-01 Year of manufacture: 2008 Plastic (mesh) belt Belt width 850 mm Scraper height 50 mm Distance between scrapers 90 mm Plastic roller width 720 mm Cutting system consisting of 6 knives Distance between knives 115 mm Overall dimensions: 3150 x 1550 x 2370 mm. - Belt conveyor Plastic belt Belt width 520 mm Overall dimensions: 2080 x 800 x 980 mm. - Vertical screw conveyor Lifting height 1600 mm Overall dimensions: 1900 x 750 x 2900 mm. - Mobile VEB drum washer Type: 60 Serial number: 1204 Power supply: 380 V, 50 Hz Power 1.1 kW Protection rating IP44 Drum width 470 mm Perforation diameter 10 mm Overall dimensions: 1250 x 1100 x 1790 mm. - Weighing system: - Belt elevator with scrapers Belt width 350 mm / 220 mm Scraper height 50 mm Distance between scrapers 90 mm Lifting height 1700 mm - Systec industrial scale (type: IT3). Dimensions: 770 x 440 x 520 mm. Overall system dimensions: 3200 x 1000 x 2130 mm. This technological line is a fully automated, synchronized sequence of machines designed for the comprehensive preparation, slicing (dicing), intensive washing, and precise weighing of root vegetables, with particular emphasis on potatoes. The system finds wide application in food processing plants, large commercial kitchens, and vegetable processing facilities of the "marktfrisch" type. The technological process begins with feeding the raw material onto an elevating belt and a precision rotary-knife slicer from Limas, which, thanks to its 6-knife arrangement, ensures perfectly even cutting. Subsequently, the product is transported via conveyors and a vertical screw conveyor to a mobile VEB drum washer, where effective removal of impurities takes place in the drum with 10 mm perforations. The final element of the line is an integrated weighing system, which feeds the raw material directly onto a Systec IT3-controlled scale, guaranteeing full portion control and repeatability of the production process.

Condition: excellent (used), Year of construction: 1997, operating hours: 123 h, functionality: fully functional, Application: Fuel supply for wood chip biomass boilers 1. System description The Mawera SST, a two-beam, hydraulically operated discharge system, is used for the uniform and continuous discharge of wood chips from a rectangular storage silo. The sliders or scrapers move the material in alternating strokes to feed the boiler. 2. Main dimensions Silo length: • Version with 12 sliders: 15.00 m Internal silo width: 4.24 m Scraper blade width: 900 mm Scraper blade depth: 250 mm Scraper blade height: 70 mm 3. Drive and operation Hydraulic drive with two cylinders Thrust force: 160 kN Tensile force: 80 kN Automatic, alternating stroke control synchronized with the boiler control 4. Connections Material discharge into a central collection pit Lsdpfx Abj Aba T Uj Aohn Further transport via screw or chain conveyors Boiler connection: DN 315 5. Installation requirements Concrete floor, MONO-FINISH quality, tolerance ±5 mm Base plates, openings, and covers to be provided by the customer Maintenance access to the hydraulic unit must be ensured 6. Advantages Reliable operation with varying wood chip quality Consistent fuel supply for 24/7 boiler operation Low maintenance requirements Already disassembled, will be loaded onto a truck. The support beams can be disassembled into 6.3 m segments. The width during transport is not 4.24 m, as the beams can be removed side by side. The scrapers are removable. Transport is possible with a standard truck. Already disassembled.

Condition: used, Year of construction: 2003, operating hours: 56,616 h, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 770 mm, rapid traverse X-axis: 3,000 m/min, rapid traverse Y-axis: 3,000 m/min, rapid traverse Z-axis: 3,000 m/min, feed length X-axis: 2,500 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 770 mm, feed rate X-axis: 3,000 m/min, feed rate Y-axis: 3,000 m/min, feed rate Z-axis: 3,000 m/min, nominal power (apparent): 40 kVA, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 3,700 mm, total length: 6,500 mm, total width: 4,000 mm, table width: 1,000 mm, table height: 950 mm, table length: 3,220 mm, rotational speed (min.): 30 rpm, rotational speed (max.): 8,000 rpm, overall weight: 21,000 kg, spindle speed (min.): 30 rpm, spindle speed (max.): 8,000 rpm, spindle nose: SK 40, number of slots in tool magazine: 40, tool length: 380 mm, tool diameter: 80 mm, tool weight: 15,000 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, We are offering this used Hedelius BC100-2500 vertical machining center, manufactured in 2003. Key data: Manufacturer: HEDELIUS GmbH Type: BC 100/40-2500 Year of manufacture: 2003 Power requirement / voltage: 40 kW / 400 V / 50 Hz (40kVA) Total weight: 21000 kg Space requirements: Length: 6.50 m Width: 4.00 m Height: 3.70 m Control system: Program input: HEIDENHAIN Control: iTNC 530 NC software version: 340422 11 SP5 PLC software version: BC100_V1.2 Operating hours: Control on: 67335 Machine on: 56616 Program runtime: 18289 Travel distances: X-axis: 2500 mm Y-axis: 1000 mm Z-axis: 770 mm Feed rate: X-axis: 3000 mm/min Y-axis: 3000 mm/min Z-axis: 3000 mm/min Rapid traverse: 3000 mm/min Workpiece clamping area - fixed machine table: Length: 3220 mm Width: 1000 mm Work table: T-slots: DIN 650 Slot width: 22 mm Slot spacing: 200 mm Number: 5 Table height: Fixed machine table: 950 mm Tool magazine: Magazine capacity: 40 positions Max. tool diameter: Ø 80 mm (with available empty slots): Ø 125 mm Max. tool length: 380 mm Max. individual weight: 15 kg Total magazine weight: 600 kg Spindle: Lsdpfjz H Hwkex Ab Aehn Speed range: 30 – 8000 rpm Mount: SK 40 Special accessories: Scraper belt conveyor: AME GmbH Total length: ≈ 6660 Height: ≈ 1760 Depth: ≈ 740 Belt filter system: (High-pressure coolant system) Model: PS 120 Tank capacity: 780 l Output: 120 l/min Filter fleece: 670 mm 100 m on roll Length: ≈ 2320 Height: ≈ 1060 Depth: ≈ 850 Control cabinet - cooling unit: Manufacturer: Pfannenberg Type: DTS 7241 Model No.: 217943 Wireless measuring probe: Manufacturer: HEIDENHAIN Model: TS 632 Type: Infrared measuring probe Mount: SK 40 If you have any questions or need more information, please send us a message or call us.

Condition: excellent (used), Felder TEMPORA F600 edge bander with glue box Liquids Pre-milling cutters, Glue application with roller, Interchangeable glue tank Second tank included Features glue box, enabling edge banding with PUR glue Pneumatic pre-cut guillotine Liquids End-trimming sawblades Top/bottom trimming unit Corner rounding unit, Profile scraper Cleaning fluids Flat scraper Polishing unit The machine has NC control Max workpiece height: 60mm Max edge banding thickness (roll): 3mm Lhodpfx Abey N Sdys Aen Feed rate: 10 m/min Original working distance: 30,000 meters, in my opinion the technical condition is very good Year: 2023 Possibility to inspect and test on site

Condition: ready for operation (used), Year of construction: 2021, operating hours: 15,000 h, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D sl, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 100, number of axes: 4, This 4-axis HELLER H5000 horizontal machining centre was manufactured in 2021. It features a working range of 800 mm in all axes and a maximum workpiece diameter of 900 mm. The machine includes a tool taper of HSK-A 100 and a tool magazine capacity of 100 slots. If you are looking to get high-quality machining capabilities, consider the HELLER H5000 machine we have for sale. Contact us for further details. Lhsdpsz Ixt Hefx Ab Aon - Machine Count: 2 units- Control Unit: Siemens SINUMERIK 840D solution line with 24" Multitouch Main Control Panel and HELLER Operation Interface- Working Range (X/Y/Z Axes): 800 / 800 / 800 mm- Drive Package: POWER Package (Standard Drive in X/Y/Z)- Rapid Traverse (X/Y/Z Axes): 50 m/min- Acceleration (X/Y/Z Axes): 5 m/s²- Feed Force X- and Y-Axis (ED S3 -40%): 15,000 N- Feed Force Z-Axis (ED S3 -40%): 20,000 N- Feed Axis Servomotors: Incremental Encoders- Linear Axis Positioning Tolerance (Tp): 0.005 mm- Working Unit: PC 100 i Power Cutting Unit (10,000 rpm, 45 kW, 360 Nm)- Tool Taper: HSK-A 100 according to DIN 69 893- Tool Magazine: 100 Slots, Chain Type (HSK-A 100) with Comfort Operator Terminal at Tool Setup Station- Tool Breakage Control: Fast Drill Breakage Control- Collision Monitoring: Damage Minimization Monitoring System- NC Rotary Table (B-Axis): 360,000 x 0.001 deg Indexing, 25 rpm, 8 arcsec Accuracy, 12,000 Nm Max. Tangential Moment, 18,000 Nm Max. Tilting Moment- Plane Transformation: CYCLE 800- Workpiece Setup Station: Manually Rotatable 4 x 90 deg- Workpiece Clamping Interface: 5-way Media Interface, Hydraulic Pressure 200 bar Proportional Technology- Pallets: 2 Special Pallets in Basic Machine (HELLER Drawing AP.205705) with DIN Hole Pattern- Pallet Dimensions: 630 x 630 mm- Max. Workpiece Diameter: 900 mm- Max. Workpiece Height: 1,000 mm- Max. Clamping Load (Pallet 1): 1,000 kg (single-sided) / 1,400 kg (double-sided)- Pallet Change Time: 13 s (without hydraulic clamping) / 13.5 s (with hydraulic clamping)- Coolant & Chip Conveyor: Scraper Belt Conveyor for Wet Machining- Cooling Systems: Precision Water-Air Chiller Unit (Compressor) for Direct Drives of A- and B-Axes, Spindle, and Control Cabinet; Coolant Temperature Control Unit- Mist Extraction: Emulsion Extraction System- Electrical Connection: 3~ 400 V / 50 Hz, Nominal Current 65 A, Short Circuit Rating 9 kA- Total Connected Power: approx. 37 kVA (Machine) + approx. 14 kVA (VRF Coolant Unit)- Compressed Air Supply Pressure: 5 - 6 bar- Permissible Ambient Temperature: 10 - 45 °C- Material Processed: Aluminum (exclusively)- Operating Hours: approx. 12,000–15,000 hours (pending confirmation)- Operational Status: Currently installed/in place and powered onOptional Machine Equipment:- Special Mount: Multi-Spindle Heads (HELLER Drawing 00.882914 MAGNA)- Tool Measurement: RENISHAW Radio Touch Probe RMP 60 with Receiver & HELLER Measuring Cycles- Coolant Filtration Unit: Vacuum Rotary Filter KNOLL VRF 250 with 50 bar High-Pressure Internal Coolant Supply (IKZ), Working Area Flushing, 1,200 L Tank Capacity Technical Specification Taper Size HSK 100

Year of construction: 2017, condition: used, Laser cleaning device Manufacturer: Clean Laser Type: intelliScan30 Year of manufacture: 2017 Includes extraction system TEKA 21106ä Lodpj Aa Nnrsfx Ab Ashn

Condition: used, Year of construction: 2022, Biesse Akron 1330 A Edgebander Single-sided edgebanders AKRON 1300 A Gluing Unit SP03 End trimming Unit IT03 Fine trimming Unit RF02 Corner rounding Unit AR02 PRE-MILLING UNIT RT02 Symmetrical diamond tools H=45 mm Z=2+2 30° included. EDGE SCRAPER RB02 GLUE SCRAPER UNIT RC02 BRUSHING UNIT SZ02 NC AXIS PACKAGE - GROUP OF DEVICES THAT ENABLE THE AUTOMATION OF MACHINE SET-UP It includes: - AX-1: NC axis on the infeed fence. - AX-1: NC axis on edge pressing rollers. - AX-4, NC axes on Fine trimming Unit. - AX-2, NC axes on Corner rounding Unit. - AX-4, NC axes on Edge scraper ANTIADHESIVE UNIT ADZ02 PAIR DIAMOND-COATED MILLING CUTTERS H=65 mm Z=3+3 45°.In replacement of standard tools. HYBRID GLUING CHUCK FOR GRANULATED EVA/PUR GLUE INSTEAD OF THE STANDARD SYSTEM NC GLUE FLOW CONTROL FOR EVA/PU HYBRID GLUING HEAD QM-703 PREMELTER FOR EVA GLUE ADAPTIVE INFRA RED LAMP AdIRL-700 PRO-NESTING KIT FOR FINE TRIMMING UNIT C2004010 Pair of multiprofile milling cutters for fine trimming unit: chamfering 25 degrees, R=2 mm + Lhedoz Iz Tiepfx Ab Asn R=1 mm, straight profile for solid wood ROUNDING FUNCTION ONLY SLIDING UNIT FOR CORNER ROUNDING UNIT Pair of milling cutters, R=2 mm, for corner rounding unit PRO-NESTING KIT FOR EDGE SCRAPER UNIT Pair of knives R=2 mm, for edge scraper Pair of knives R=1 mm, for edge scraper KIT FOR DELICATE PANELS FOR GLUE SCRAPER UNIT- Independent pneumatic exclusion of the top/bottom units. - Glue scraper knives pressure adjustment. CLEANING UNIT LPT02 SOPHIA - IoT Connection SPECIAL EXECUTION KIT FOR THE INSTALLATION OF THE PANEL RETURN SYSTEM (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2017, HOLZ-HER Edgebanding Machine LUMINA 1380 Used machine Year of manufacture: 2017 Condition: Well-maintained Lhodezpzy Uspfx Ab Aon Motorized pressure beam adjustment Edge thickness, roll material: 0.4 - 3 mm Edge thickness, strip material: max. 3 mm with unit FF701 max. 8 mm without unit FF701 max. 15 mm with tool change on the multi-function milling unit Edge height: max. 65 mm Workpiece thickness: 8 - 60 mm Workpiece width: min. 60 mm Workpiece length: min. 160 mm Feed speed: continuously variable, 10 - 18 m/min Control system Edge Control 19 with 18.5" touchscreen color display 16:9 ECO MODE energy-saving mode Infeed fence, 1350 mm long Motorized adjustment of infeed fence Joint milling unit 1802, edge feed MG701 SYNCHRO Glue application station Glu Jet GJ302 automatic (refurbished in 2026) Including changeover trolley Including quick-change couplings Including HSK mounting for the unit Including automatic unit detection GLU JET collection container Pressing unit 1913 MOT Cutting unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12000 min-1) pneumatically pivoting 0/10° Milling unit FR701 6 fully digital NC servo axes. Profile milling unit FF701 4 fully digital NC servo axes. Scraper unit 1929 MOT4 incl. high-gloss kit Surface scraper FK701 Spraying system 1856 for the infeed and outfeed area Spraying system (release agent) after the pressing unit Automatic chain lubrication Adaptive pressure and glue quantity control Location: Bavaria Availability: approx. August 2026

Condition: used, Year of construction: 2023, operating hours: 2,600 h, functionality: fully functional, total width: 18,500 mm, total length: 23,000 mm, compressed air connection: 6 bar, type of input current: three-phase, input current: 500 A, power: 275.5 kW (374.58 HP), space requirement length: 23,000 mm, space requirement width: 18,500 mm, For sale is a state-of-the-art, fully integrated wood pelletizing and shredding line (built in 2023) for processing A1-grade waste wood and disposable pallets into high-quality heating pellets. This turnkey complete system covers the entire process, from material feed to two-stage shredding, metal separation, suction and filtration technology, pelletizing, cooling, and bagging into big bags or smaller containers. Equipment: Lhodpfx Aozhbf Ieb Aon * Automatic scraper floor hopper with feeding system * AMIS shredder ZWS 1700 * High-performance cutting mill * Belt conveyor magnet and metal separator * SPÄNEX suction and filtration system with fire protection * GreCon spark detection system * 10 m³ material hopper with dosing system * 2 × ECOKRAFT pellet presses LP22 * Rotary screen systems with conveyor belts * Big bag system and semi-automatic bagging system Technical data: * Year of manufacture: 2023 * Total connected load: 275.5 kW * Required fuse rating: 500 A / 400 V * Production capacity during test run: approx. 460 kg/h * Space requirement: approx. 23 × 18.5 m The system is in near-new condition and is available immediately. Detailed technical documentation with all components and specifications is available and will be provided upon request.

Year of construction: 2010, operating hours: 10,000 h, condition: refurbished (used), functionality: fully functional, MEWA UC 120 B with HNDE, 2 x 30kW / 15 RPM. Ledpsz A R I Sofx Ab Ashn Large bale infeed hopper. Includes a discharge conveyor and a 10-meter-long inclined conveyor. Neodymium magnet roller at the head. The UC 120 B was manufactured in 2010 and completely overhauled in 2025. The cutter unit is brand new. New blades, new shafts, new bearings, new scrapers. Plus costs for dismantling and transport.

Condition: used, Year of construction: 1996, Used Machine Features and Technical Specifications: - Automatic edge magazine for rolls up to 3 mm; manual feed for strips up to 13 mm - Trimming shears for up to 3 mm - Cartridge-type adhesive application system - 3-roller pressure unit - 2-motor trimming unit - Multifunction routing unit (flush, radius, chamfer) - Radius scraper - Corner copying unit Ljdo Aa A I Sjpfx Ab Aehn - Surface scraper - Buffing unit - Edge banding thickness: 0.4–13 mm (with tool change) - PVC edges up to 3 mm - Edge banding height: max. 51 mm - Edge banding length: min. 200 mm - Edge banding overhang per side: max. 3 mm - Workpiece width: min. 60 mm - Workpiece length: min. 180 mm - Workpiece thickness: min./max. 6/45 mm - Feed rate: 11 m/min. - Dimensions: 4500 x 1020 x 1630 mm - Distance from wall: 400 mm New gluing station installed in 2015

Condition: good (used), functionality: fully functional, Year of construction: 2022, machine/vehicle number: TA-F203494, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: FSCUT, controller model: FSCUT8000, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: Raycus12000, laser power: 12,000 W, laser wavelength: 1,070 nm, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 40 mm, sheet thickness stainless steel (max.): 40 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness brass (max.): 20 mm, working length: 3,050 mm, working width: 1,520 mm, feed rate X-axis: 120 m/min, feed rate Y-axis: 120 m/min, cutting speed: 85,000 mm/min, positioning accuracy: 0.02 mm, repeat accuracy: 0.03 mm, workpiece weight (max.): 1,500 kg, power: 63 kW (85.66 HP), input voltage: 400 V, input frequency: 50 Hz, type of cooling: water, overall weight: 10,000 kg, Equipment: cooling unit, documentation/manual, dust extraction, fume extraction, Precitec Procutter 2.0 laser head Lhedpfx Asy Ed S Isb Aen Autofocus height control system Hörbiger laser gas system 2 CCD cameras Teka extraction unit ECO-Cube

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, year of last overhaul: 2025, For sale: a used, professional edge banding machine, Hebrock model AKV 3007 DK-F, manufactured in 2016, complete with additional equipment (detailed below). First owner. Overhauled last year (drive belt and rollers replaced, and the glue pot was refurbished). The edge banding machine operated on a single shift, 8 hours a day, from Monday to Friday. The machine is designed for efficient edge banding of furniture components with PVC, ABS, melamine, and veneer edges. This model is valued for its high-quality processing, robust construction, and ability to operate in continuous mode. Very good condition – the machine is in fully operational condition, regularly serviced, and ready for use without any additional investment. VAT invoice 23%. Ready for pickup. The machine is available for viewing by appointment in Borów (83-332). Please contact me by phone for more information, as well as videos and photos of the machine in operation. Main parameters and specifications: - Gluing system: Top-mounted hopper for granules. The machine supports standard (EVA) and polyurethane (PUR) adhesives, as well as zero-joint systems. - Edge dimensions: Edge banding thickness from 0.4 to 3 mm for components with a thickness of 10 to 60 mm. - Power supply: 400 V / 3 Ph / 50 Hz electrical connection. Maximum power consumption is 14 kW. - Units: Equipped with a scraper, trimming cutter, corner rounding cutter, profiling cutter, and polishing unit. - Additional equipment: Pneumatic beam phase adjustment, optional interchangeable glue pot, front notching saw, free feed, front spraying, cleaning spray. Lhjdpjzizabjfx Ab Ajn Detailed description: A German-made Hebrock narrow strip edge banding machine with a system for applying glue to the edge of the component and edge banding with edges from 0.4 to 3 mm thick for components from 10 to 60 mm thick, as well as pre-milling the board with diamond cutters. The machine is optimally equipped for every type of edge. The machine's equipment is fully utilized thanks to the computer and PLC control, which fully controls the individual units. The patented Hebrock system in the edge trimming units (which involves adjusting the lower and upper cutters from outside the machine – during operation), as well as automatic adjustment between thin and thick edges, eliminates the need to open the rear housing, which results in significant time savings, comfort, precision, and user-friendliness. Technical data: • Edge thickness: 0.4 – 3 mm • Component thickness: 10 – 60 mm • Max edge height: 65 mm • Compressed air requirement: approx. 450 l/min • Feed speed: 7-11 m/min, 0.75 motor • Glue heating time: 6 min • Total power consumption: max. 14kW • Electrical connection: 400V, 50Hz • Working height: 880 mm • Machine dimensions [mm]: 5850 x 1425 x 1520 • Machine weight: 1600 kg • Exhaust nozzle diameter: ø 140 mm • Required extraction performance: 24 m3/min • Minimum exhaust air velocity in the exhaust nozzle: 20 m/s • Required vacuum in the exhaust nozzle: 1300 Pa

Condition: like new (used), Year of construction: 2014, Pilot Crystallizer Mini pilot plant for margarine, shortening, puff pastry, and other products that require mixing and cooling. A complete mini laboratory plant for research and development. Ljdpfjz Iy Hzex Ab Ajhn Including: 2 tanks, 5 liters each, for water and fat-phase ingredients. 1 buffer tank, 20 liters. High-pressure pump, up to 75 bar. 3 crystallization cylinders, named A1 + A2 + A3. 2 pin mixers, named C75 + C150. 1 rework melter, C heat. 1 resting tube, named B200. The above-mentioned units can be positioned in any possible way, for example, A1-A2-B or A1-C75-A2-A3-C150, by switching pre-assembled high-pressure piping. The crystallizer cylinders, which are scraped surface heat exchangers (SSHE), are cooled by direct evaporation using an integrated Freon cooling compressor. The tubes have a diameter of 30 mm and a length of 80 mm; the rotor is equipped with 2 scrapers, providing a surface area of 0.113 m² per tube. A temperature sensor is located after each unit. The capacity is variably adjustable, up to 50 liters per hour. Cooling system manufactured by GEA, with an integrated compressor and water-cooled condenser. There are 3 independent cooling circuits (for each crystallizer). The tanks are double-jacketed, with an agitator and temperature sensors. The entire unit is built on a frame and is mobile. The controls are integrated and tested using an HMI touch screen control panel with ‘SpecView Inc.’ software, and the controllers are from RKC systems. The unit can be controlled from the HMI by simply starting and stopping the individual components, but a recipe can also be created for controlling the motor speed, temperatures, and valves. All motors are equipped with frequency converters, Siemens micromasters and 1 x Danfoss. An integrated CIP system, with CIP circulation and a CIP concentrate hose dosing pump.