Used Steidle Minimum Quantity Lubrication for sale (9,012)

Condition: ready for operation (used), Year of construction: 2004, 5-axis CNC machining center MAKA MM 7t, in portal design with two tables and two 5-axis head units for alternating operation. Year of construction: 2004 • High-performance CNC milling center for 5-axis machining, ideal for machining aluminum components / deep-drawn parts / GRP components. • Equipped with automatic central lubrication and control cabinet with air conditioning unit. • CNC control BWO 920, memory 8 MB, in the integrated PC. • Mobile control panel stand. Technical data: Working areas / cube dimensions: with tool length 130 mm and diameter 60 mm X-axis: 2 x 1,500 mm Y-axis: 2,250 mm Z-axis: 650 mm, at 120 mm tool height A-axis: 540° (+/- 270°) B-axis: 200° (+/- 100°) Rapid traverse speed: X/Y-axis: 60 m/min. Hodpfszhbgfsx Aahep Z-axis: 24 m/min. A/B-axis: 10,000 °/min. 2 high-speed milling spindles HSD 7.5 kW (S1), HSK-F63 Speed continuously adjustable from 2,000 – 24,000 rpm, Rated power from 12,000 rpm, with ceramic bearings, water-cooled. Tool holder HSK-F63 with tool changer. 1 traveling drum tool magazine per head unit, for 10 tools up to Ø 60 mm and – depending on the tool diameter – 130 mm length from the base. 2 tables with aluminum table top 1,500 x 2,250 mm with grid drilling. 1 pneumatic clamping system per table. 1 vacuum clamping system per table. 2 minimum quantity lubrication systems with spray nozzles. Work safety: 2 manually operated sliding doors for front loading. In alternating operation, the loading and unloading area is secured with two electrically driven roller shutters, 1 partition wall (removable) between the tables. With protective cabin for the machine rear area, side access door, the cabin is open at the top. Current location: southern Thuringia / Germany, where the machine can be inspected.

Condition: ready for operation (used), Year of construction: 2004, 5-axis CNC machining center MAKA MM 7t, portal design with two tables and two 5-axis head units for alternating operation. Year of manufacture: 2004 • High-performance CNC milling center for 5-axis machining, ideal for machining aluminum components / deep-drawn parts / GRP parts. • Equipped with automatic central lubrication and control cabinet with air conditioning unit. • CNC control BWO 920, memory 8 MB, in the integrated PC. • Movable control panel stand. Technical data: Working areas / cube dimensions: with tool length 130 mm and diameter 60 mm X-axis: 2 x 3,000 mm Y-axis: 1,500 mm Z-axis: 650 mm, at 120 mm fixture height A-axis: 540° (+/- 270°) B-axis: 200° (+/- 100°) Hjdpfozhbbpox Aahop Rapid traverse speed: X/Y-axis: 60 m/min. Z-axis: 24 m/min. A/B-axis: 10,000 °/min. 2 high-speed milling spindles HSD 7.5 kW (S1), HSK-F63 Speed infinitely adjustable from 2,000 – 24,000 rpm, Rated power from 12,000 rpm, with ceramic bearings, water-cooled. Tool holder HSK-F63 with tool changer. 1 drum tool magazine per head unit, for 10 tools up to Ø 60 mm and – depending on the tool diameter – 130 mm length from the top surface. 2 tables with aluminum table top 3,000 x 1,500 mm with grid hole pattern. 1 pneumatic clamping system per table. 1 vacuum clamping system per table. 2 minimum quantity lubrication systems with spray nozzles. Work safety: 2 manually operated sliding doors for front loading. In alternating operation, the loading and unloading area is secured with two electrically driven roller shutters. With protective cabin for the machine rear area, side access door, the cabin is open at the top. Current location: southern Thuringia / Germany, where the machine can be inspected.

Condition: ready for operation (used), Year of construction: 2005, 5-axis CNC machining center MAKA MM 7t, in gantry design with two tables and two 5-axis head units for alternating operation. Year of manufacture: 2005 • High-performance CNC milling center for 5-axis machining, ideal for machining aluminum components / deep-drawn parts / GRP parts. • Equipped with automatic central lubrication and control cabinet with air conditioning unit. • CNC control BWO 920, memory 8 MB, in the integrated PC. • Mobile control panel stand. Technical data: Working areas / cube dimensions: with tool length 130 mm and -Ø 60 mm X-axis: 2 x 3,000 mm Y-axis: 1,500 mm Z-axis: 650 mm, at 120 mm tool height A-axis: 540° (+/- 270°) B-axis: 200° (+/- 100°) Rapid traverse speed: X/Y-axis: 60 m/min. Z-axis: 24 m/min. A/B-axis: 10,000 °/min. 2 high-speed milling spindles HSD 10 kW (S1), HSK-F63 Speed continuously adjustable from 2,000 – 24,000 rpm, Rated power from 12,000 rpm, with ceramic bearing, water-cooled. Tool holder HSK-F63 with tool changer. 1 moving drum tool magazine per head unit, for 10 tools up to Ø 60 mm and – depending on the tool diameter – 130 mm length from the base plane. 2 tables with aluminum table top 3,000 x 1,500 mm with grid drilling. 1 pneumatic clamping system per table. 1 vacuum clamping system per table. Hedpfxezhabzo Aahjp 2 minimum quantity lubrication systems with spray nozzles. Work safety: 2 sliding doors to be operated manually, for loading from the front. In alternating operation, the loading and unloading area is secured with two electrically driven roller shutters. With protective cabin for the machine rear area, side access door, the cabin is open at the top. Current location: southern Thuringia / Germany, where the machine can be inspected.

Condition: used, Year of construction: 2010, operating hours: 9,000 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,250 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, Travel distances X=2000 mm, Y=1500 mm, Z=1250 mm - Siemens 840 DsL CNC control - NC rotary table for 4-sided machining, 1250 mm x 1250 mm - Horizontal spindle HSK100 - Spindle: 2500 rpm, HSK 100, 2200 Nm spindle torque - Approx. 9,500 spindle hours - Tool changer system HSK 100 / 40 stations - Chip conveyor - Internal/external air blow-off device - Minimum quantity lubrication for dry machining of castings - Full enclosure - Large interference circle 2300 mm - Double pallet changer - Short delivery time, subject to prior sale - Year of construction: 2010 Coolant supply available as an option - ICS 60 bar for deep hole machining Hjdpfx Aezfg Nyoahop

Condition: used, Year of construction: 2004, 5-axis CNC machining center MAKA MM 7t, portal design with two tables and two 5-axis head units for alternating operation. Year of manufacture: 2004 • High-performance CNC milling center for 5-axis machining, ideal for machining aluminum components / deep-drawn parts / GRP parts. • Equipped with automatic central lubrication and control cabinet with air conditioning unit. • CNC control BWO 920, memory 8 MB, in the integrated PC. • Mobile control panel stand. Technical data: Working areas / cube dimensions: with tool length 130 mm and diameter 60 mm X-axis: 2 x 2,000 mm Y-axis: 2,250 mm Z-axis: 480 mm, at 120 mm fixture height A-axis: 540° (+/- 270°) B-axis: 200° (+/- 100°) Rapid traverse speed: X/Y-axis: 60 m/min. Z-axis: 24 m/min. A/B-axis: 10,000 °/min. 2 x universal head for 5-axis milling with 90° head, 2 high-speed milling spindles HSD 7.5 kW (S1), HSK-F63 Speed continuously adjustable from 2,000 – 24,000 rpm, Rated power from 12,000 rpm, with ceramic bearings, water-cooled. Tool holder HSK-F63 with tool changer. 1 rotating drum tool magazine per head unit, for 10 tools up to Ø 60 mm and – depending on the tool diameter – 130 mm length from the base plane. 2 tables with aluminum table top 2,000 x 2,250 mm with grid hole pattern. To machine larger components, the tables can be coupled. 1 pneumatic clamping system per table. Hodpjzg Imcjfx Aahop 1 vacuum clamping system per table. 1 minimum quantity lubrication system with spray nozzles per milling spindle. Work safety: 2 sliding doors to be operated manually, for loading from the front. In alternating operation, the loading and unloading area is secured with two electrically driven roller shutters, 1 partition wall (removable) between the tables. With protective cabin for the machine rear area, side access door, the cabin is open at the top. Current location: Southern Thuringia / Germany, where the machine can be inspected.

Condition: ready for operation (used), Year of construction: 2008, 5-axis CNC machining center MAKA MM 7t A, portal design with two tables for alternating operation. Year of manufacture: 2008 • High-performance CNC milling center for 5-axis machining, ideal for machining aluminum components. • Equipped with automatic central lubrication and control cabinet with air conditioning. • CNC control BWO 920, memory 8 MB, in the integrated PC. • Mobile control panel stand. Technical data: Working areas / cubic dimensions: Hjdpfx Ajzg H A Aeahep with tool length 130 mm and diameter 60 mm X-axis: 2 x 1,500 mm Y-axis: 1,500 mm Z-axis: 650 mm, at 120 mm fixture height A-axis: 540° (+/- 270°) B-axis: 200° (+/- 100°) Rapid traverse speed: X/Y-axis: 60 m/min. Z-axis: 24 m/min. A/B-axis: 10,000 °/min. 1 universal head for 5-axis milling with 50° tilting head, 1 high-speed milling spindle HSD 7.5 kW (S1), HSK-F63, Speed continuously adjustable from 2,000 – 24,000 rpm, Rated power from 12,000 rpm, with ceramic bearing, water-cooled. Tool holder HSK-F63 with tool changer. 1 traveling drum tool magazine per head, for 10 tools up to Ø 60 mm and – depending on the tool diameter – 130 mm length from the reference plane. 2 tables with aluminum table top 1,500 x 1,500 mm with grid holes. The tables can be coupled for machining larger components. Several pneumatic clamping circuits per table. 1 minimum quantity lubrication system with spray nozzles. Chip conveyor designed as a scraper conveyor. Work safety: 2 automatic lifting gates for front loading. In alternating operation with 1 partition (removable) between the tables. Safety bumper on the front edge of the table. With protective cabin for the rear of the machine, side access door, the cabin is partially closed at the top. Current location: southern Thuringia / Germany, where the machine can be inspected.

Condition: used, Year of construction: 2006, 5-axis CNC machining center MAKA MM 7t DK, portal design with two tables and two 5-axis head units for alternating operation. Year of manufacture: 2006 • High-performance CNC milling center for 5-axis machining, ideal for machining aluminum components / deep-drawn parts / GRP parts. • Equipped with automatic central lubrication and control cabinet with air conditioning. • CNC control BWO 920, memory 8 MB, in the integrated PC. • Mobile control panel stand. Technical data: Working areas / cube dimensions: with tool length 130 mm and diameter 60 mm X-axis: 2 x 2,000 mm Y-axis: 2,250 mm Hedpfjzg E E Njx Aahjp Z-axis: 480 mm, at 120 mm tool height A-axis: 540° (+/- 270°) B-axis: 200° (+/- 100°) Rapid traverse speed: X/Y-axis: 60 m/min. Z-axis: 24 m/min. A/B-axis: 10,000 °/min. 2 high-speed milling spindles HSD 7.5 kW (S1), HSK-F63 Speed continuously adjustable from 2,000 – 24,000 rpm, Rated power from 12,000 rpm, with ceramic bearing, water-cooled. Tool holder HSK-F63 with automatic tool changer. 1 moving drum tool magazine per head unit, for 10 tools up to Ø 60 mm and – depending on the tool diameter – 130 mm length from the plane. 2 tables with aluminum table top 2,000 x 2,250 mm with grid drillings. The tables can be coupled to process larger components. 1 pneumatic clamping system per table. 1 vacuum clamping system per table. 1 minimum quantity lubrication system with spray nozzles. Work safety: 2 sliding doors to be operated manually, for loading from the front. In alternating operation, the loading and unloading area is secured with two electrically driven roller shutters, 1 partition wall (removable) between the tables. With protective cabin for the machine rear area, side access door, the cabin is open at the top. Current location: Southern Thuringia / Germany, where the machine can be inspected.

Condition: ready for operation (used), Year of construction: 2006, 5-axis CNC machining center MAKA MM 7t, portal design with two tables for alternating operation. Year of construction: 2006 • High-performance CNC milling center for 5-axis machining, ideal for machining aluminum components / deep-drawn parts / GRP parts. • Equipped with automatic central lubrication and control cabinet with air conditioning unit. • CNC control BWO 900C, V-CNC card, memory approx. 8 MB, in the integrated PC. • Portable control panel BWO Vektor MP (mobile panel), with stand. Technical data: Working areas / cubic dimensions: for tool length 130 mm and diameter 60 mm X-axis: 2 x 1,500 mm Y-axis: 1,500 mm Z-axis: 650 mm, at 120 mm fixture height A-axis: 540° (+/- 270°) B-axis: 196° (+/- 98°) Rapid traverse speed: X/Y-axis: 60 m/min. Z-axis: 24 m/min. A/B-axis: 10,000 °/min. 1 high-speed milling spindle HSD 10 kW (S1), HSK-F63 Speed continuously adjustable from 2,000 – 24,000 1/min., Rated power from 12,000 1/min., with ceramic bearings, water-cooled. Tool holder HSK-F63 with tool changer. 1 rotating drum tool magazine for 10 tools up to Ø 60 mm and – depending on the tool diameter – 130 mm length from the reference plane. Hodpszg Efpofx Aahop 2 tables with aluminum table top 1,500 x 1,500 mm with grid drilling. To machine larger components, the tables can be coupled. 1 pneumatic clamping system per table. 1 minimum quantity lubrication system with spray nozzles. Work safety: 2 manually operated swing doors for front loading. In alternating operation, the loading and unloading area is secured with two electrically powered roller shutters, 1 partition wall (removable) between the tables. With protective cabin for the machine rear, side access door, the cabin is open at the top. Current location: southern Thuringia / Germany, where the machine can be inspected.

Condition: new, Year of construction: 2026, cutting height (max.): 150 mm, cutting range round steel at 45°: 108 mm, cutting range round steel at 90°: 108 mm, BERG+SCHMID GBS 250 Super AutoCut double mitre bandsaw Speed: 18-110 - Mitre left 60° + right 45° - Sliding quick clamping vice - Solid vice + machine casting - Ball bearing rotary table - Hydraulic brake cylinder - Solid, large material support - Automatic cooling system - Worm gear running in oil bath - Closed saw frame Hodpfx Aaor Ik Sqehsp - Adjustable ball roller bearings - Tool compartment - door in the base - Cut monitoring by ammeter - Cutting pressure feed regulator - Support roller (infeed side) - Machine base (supplied disassembled) GBS 250 Super AutoCut 3-stage system: I. Automatic lowering of the saw frame via the hydraulic cylinder, infinitely adjustable feed, with limit switch at the end of the cut II. high-speed lowering of the saw frame to the workpiece, then switch to normal saw feed. (e.g. for scribing) III. Hydraulic cylinder works as brake cylinder: a) Manual operation (e.g. for notching) or b) Lowering in idle state Saw blade dimensions: 2765x27x0.9mm Further accessories such as saw bands, roller conveyors, measuring stops, minimum quantity lubrication etc. available on request! Delivery time: ex stock Waiblingen Beinstein

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,700 mm, travel distance Z-axis: 315 mm, total height: 2,410 mm, total width: 3,490 mm, overall weight: 2,200 kg, spindle speed (max.): 18,000 rpm, product length (max.): 3,570 mm, number of axes: 3, This 3-axis KIESLING Perforex BC1007HS was manufactured in 2015. It features impressive travel distances with an X-axis of 2,500 mm, Y-axis of 1,700 mm, and Z-axis of 315 mm. The machine is equipped with a CNC 4-axis controller and a robust electric spindle capable of speeds up to 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the KIESLING Perforex BC1007HS horizontal machining centre we have for sale. Contact us for further details. • Mounting plate dimensions • Length: 250–2,200 mm (1,100 mm with door open) • Width: 95–1,600 mm (1,700 mm with door open) • Height/Thickness: 1–10 mm • Cube dimensions • X (width): 90–1,400 mm Hedpfx Ajzdik Sjahep • Y (height): 100–1,600 mm • Z (depth): 110–1,600 mm • Axes and travel • Rapid traverse: X 60 m/min / Y 60 m/min / Z 20 m/min • Spindle and tooling • Electric spindle: 7.5 Nm • Tool changer: fixed tool magazine, 18 tool locations, 88 mm center-to-center • Standard tooling set: • Collets for drills: Ø 3–7 mm • Collets for thread cutters: M4, M5, M6, M8 • Cooling/lubrication: minimum quantity lubrication at the drill • Pneumatics, controller, safety • Pneumatics: 10 mm connection (ID), 6 bar, 150–200 L/min air consumption • Controller: CNC 4-axis (ferrocontrol) • Safety device: photoelectric light curtain

Condition: used, Year of construction: 2024, INDEX MS22-8 Mfd. 2024 2 NCU (4) Y-Axis SL Control Cutting hours: 1,000 Turnkey Available Located in Europe 4-Meter IEMCA SIR MS22-8/43/P Rack loader 50 Hz D9-13-19-25 Bar length 4300 mm with drilling unit and minimum quantity lubrication unit additional end-of-bar sensor Bar stock 500mm (D12-D24) Bar stock 340 mm (D5-D11). Additional storage chain for 22 bars with Profinet interface. 1 11007253 (21711) 1 set (8 pieces) bar stock pushers, external clamping for bar stock diameters D7-D10 mm, internal clamping for bar stock diameters D13-D18 mm, consisting of: 8 bar stock pushers D12 8 rotating sleeves D12 1 10287026 (21712) 1 set (8 pieces) bar stock pushers, external clamping for bar stock diameters D11-D16 mm, internal clamping for bar stock diameters D19-D24 mm, consisting of: 8 bar stock pushers D18 8 rotating sleeves D18 1 10536056 (21713) 1 set (8 pieces) bar stock pushers for bar diameters D17 mm-D22 mm, consisting of: 8 bar stock pushers D23 8 rotating sleeves D23 1 10414481 (21702) 1 set (8 pcs.) of internal clamping sleeves D12mm for bar diameters D13 mm - D18 mm Drill diameter D8 mm. 1 10472413 Hjdpfx Aasxnrtcjhjp (21704) 1 set (8 pcs.) of external stops D12 mm for bar diameters D13 mm - D18 mm pre-machined. 1 10264327 (21703) 1 set (8 pcs.) of internal clamping sleeves D18mm for bar diameters D19 mm - D24 mm Drill diameter D15mm. 1 10058206 (21705) 1 set (8 pcs.) of external stops D18 mm for bar diameter D19 mm - D24 mm pre-machined. 1 12123486 Drill for drilling unit consisting of: 1 indexable insert drill D 15 mm 10 indexable inserts for steel 2 solid carbide drills D 8 mm

Condition: excellent (used), Year of construction: 1997, Control Fanuc Series 20-T Turning diameter 330 mm Bar diameter 42 mm Turning length 650 mm Hedpfx Aezb R Iasahsp Speed 5,000 min-1 8-position turret Minimum quantity lubrication

Condition: new, Year of construction: 2023, BERG+SCHMID Aluminum Circular Saw Model VELOX 350 Manual Speed: 1800+3,600 rpm - Mitre left + right 45° - Head bevel cuts up to 45° (Schifter) - Ball bearing rotary table - Machine base - Highest cutting quality due to vibration absorption - Very smooth running cut - Pull-through start and high performance - Machine base with chip drawer Saw blade dimensions: 350x32mm Further accessories such as saw blades, roller conveyors, measuring stops, minimum quantity lubrication etc. available on request! Delivery time: ex stock Waiblingen Beinstein Hjdpor Ilktefx Aahjp

Condition: excellent (used), Year of construction: 2023, operating hours: 67 h, functionality: fully functional, machine/vehicle number: 1591 / 1592, saw blade diameter: 500 mm, Fully Automatic Sawing and Punching Machine for Aluminum and Plastic Profiles The Profilma 502 ST - HV combines precise sawing and flexible punching in a fully automatic process. Based on the Profilma 502 model, it is specifically optimized for high-volume applications and combined processing operations – including the handling of entire profile layers. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated fault diagnosis. An IXON router allows for secure remote access via VPN. Up to 10 punching dimensions can be programmed per order. The horizontal punching unit can be deactivated if required. Sawing Area & Feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed control - Saw cuts from below, with motorized feed - Material feed: 3–800 mm, reversible up to 4,000 mm - Ball screw spindle with servo drive and round guide shafts - Remnant length: from 75 mm (saw mode), from 80 mm (punch/saw mode)* Punching Unit: - Vertical and horizontal hydraulic punching (on discharge side) with automatic oil cooler - Punching force: 2 × 150 kN - Stroke: ≤ 20 mm - Vertical stroke infinitely adjustable (also suitable for embossing) - Horizontal punching cylinder can be switched off separately - Double stroke cycle time: 2x 2–3 seconds - Punch scrap is discharged sideways from the machine frame - 250 × 800 mm conveyor belt for part discharge Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction nozzles Ø 100 mm, volt-free contact for extraction control - Minimum quantity lubrication unit with 2x 3-liter tanks and level indicator - Noise protection package: sound-insulated hood and internal saw blade guard - Roller conveyor (740 mm) with reach protection on infeed side - Sturdy stationary frame, working height: 960 mm - Manually opening safety hood - Saw blade housing located under the table Max. Cutting Area: - Profile height: up to 65 mm Hsdpfx Aoyyzxhjahop - Profile width: up to 135 mm Technical Data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - Total of 2 units available ----- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product but also tailored financing options that suit your needs. Whether down payment, installment plans, or individual financing models – together we will find the right solution. If desired, we can also handle the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so you don’t have to worry about a thing. 📞 Contact us for more information or a non-binding quote. We provide you with personal and competent advice. Subject to prior sale, changes, and errors!

Condition: repair required (used), Year of construction: 2008, functionality: not functional, machine/vehicle number: 6034, travel distance X-axis: 7,200 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 590 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, nominal power (apparent): 45 kVA, controller manufacturer: HEIDENHAIN, controller model: Bahnsteuerung iTNC 530, total height: 2,900 mm, total length: 12,500 mm, total width: 4,810 mm, overall weight: 14,000 kg, spindle speed (min.): 100 rpm, spindle speed (max.): 12,000 rpm, operating pressure: 7 bar, The BZ 7000 is designed exclusively for milling, drilling, countersinking, reaming, and thread cutting of metals, aluminum, plastics, and wood (chipboard and solid wood). URBAN CNC Machining Center BZ 7000 • Year of manufacture: 04/2008 • Control: HEIDENHAIN path control iTNC 530 • 4 axes • Travel paths X / Y / Z axis: 7200 / 450 / 590 mm • Working area X / Y / Z axis: 7000 / 400 / 350 mm • Weight: 14 t Hedpeyzxfnefx Aahsp Equipment: - Robust base frame in welded steel construction - Ball rail guides on all axes - Milling spindle unit: 100 - 12,000 rpm, tool mounting SK 40 Drives: - X-axis (50 m/min) via rack and pinion drive - Y/Z-axis (25 m/min) via ball screw drive - B-axis: 9000°/min - Swiveling control panel - Automatic central lubrication - Traveling tool changer for 12 SK 40 tool holders - Coolant emulsion system - Machine lamp - Safety fence - Electronic handwheel integrated into the control panel - Chip drawers - Laser scanner - Minimum quantity lubrication system Technical Data: - Compressed air connection: R 3/8" / 6 bar - Device connection: R 1/4" - Operating pressure: approx. 6 bar - Air consumption per cycle: approx. 600 l/min at 6 bar - Electrical connection: 3 x 400 V +/- 5% / 50 - 60 Hz - Control voltage: 24 V DC - Rapid traverse X-Y-Z: 50 – 25 – 25 m/min - Infinitely variable feed: 0 - 5000 mm/min - Tool changer: disc-type changer with 12 SK 40 stations - Tool holder: SK 40 - Tool clamping: hydraulic - Coolant device: emulsion, 300 l - Spindle speed: 100 - 12,000 rpm - Speed adjustment: 80 – 120% - Drilling capacity in St 60 / aluminum: up to 28 mm Ø - Thread cutting capacity in St 60 / aluminum: up to M24 - Measurement system: rotary encoder/linear measurement system - Positioning accuracy: 0.025 mm - Repeat accuracy: 0.015 mm - Control: HEIDENHAIN iTNC 530 M, 4 controlled axes - Data interface: V 24/RS - 232 - C - Travel range X / Y / Z axis: 7200 / 450 / 590 mm - Working area X / Y / Z axis: 7000 / 400 / 350 mm - Space requirement including safety fence: approx. 60 m² (12.5 x 4.8 m) - Machine weight with accessories: approx. 14 tons - Sound emission: average sound pressure level 79 dB (A)

Condition: excellent (used), Year of construction: 2018, operating hours: 15,418 h, functionality: fully functional, travel distance X-axis: 1,520 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 245 mm, rapid traverse X-axis: 22 m/min, rapid traverse Y-axis: 22 m/min, rapid traverse Z-axis: 22 m/min, feed length X-axis: 1,520 mm, feed length Y-axis: 1,150 mm, feed length Z-axis: 245 mm, feed rate X-axis: 22 m/min, feed rate Y-axis: 22 m/min, feed rate Z-axis: 22 m/min, controller manufacturer: Datron, controller model: Datron Next, workpiece length (max.): 1,500 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 200 mm, total height: 1,970 mm, total length: 2,420 mm, total width: 2,280 mm, table width: 1,000 mm, table length: 1,500 mm, rotational speed (max.): 40,000 rpm, overall weight: 2,500 kg, spindle speed (max.): 40,000 rpm, operating hours of spindle: 8 h, spindle motor power: 3,000 W, spindle nose: HSK-E25, number of spindles: 1, number of slots in tool magazine: 12, input voltage: 400 V, type of input current: three-phase, For sale is a Datron MLCube high-speed milling machine, *manufactured in 2018, in very good condition and fully operational*. The machine is currently in continuous production use and can be inspected and demonstrated under power by appointment. The absolute highlight of this offer is the *high-frequency spindle, which was recently replaced and has only 8.10 hours of runtime – practically a brand-new spindle*. The next scheduled machine maintenance is not due until after approximately 1,243 additional operating hours, saving the buyer immediate maintenance costs. The Datron MLCube combines the precision and rigidity of a vertical machining center with the agility and compact footprint of a gantry milling machine. With a machining area of 1,500 × 1,000 mm and a small footprint, it is ideal for large-format sheet metal processing. The modern Datron Next control system with a 24" touch display enables intuitive operation and quick setup times. *COMPLETE TECHNICAL DATA & EQUIPMENT* Manufacturer: Datron AG, Ober-Ramstadt Model: MLCube Hjdjzdrurspfx Aahep Year of manufacture: 2018 Condition: Very good – well-maintained, in continuous production Control system: Datron Next (24" Multi-Touch Display + Handheld Control Panel B10-2) Spindle: 3 kW HF spindle, HSK-E25, 40,000 rpm Spindle runtime (new spindle): 8.10 hours – practically brand new! Total machine runtime: 15,418.17 hours Next maintenance due in: 1,243.30 operating hours (interval: 2,000 h) Travel (X × Y × Z): 1,520 mm × 1,150 mm × 245 mm Machining area: 1,500 mm × 1,000 mm × 200 mm Feed rate / Rapid traverse: up to 22 m/min Tool changer: 12-position, HSK-E25 (expandable to 24 positions) Tool holder: Schunk Tribos collet chuck incl. clamping device Lubrication: Minimum Quantity Lubrication (MQL), 5-liter ethanol tank + 5-liter reserve tank Measuring technology: Renishaw 3D workpiece probe with camera Clamping system: Vacuum table incl. vacuum pump Machine table: Mineral casting (vibration-damping, thermally stable) Installation dimensions (W × D × H): 2,420 mm × 2,280 mm × 1,970 mm Weight: approx. 2,500 kg Power connection: 3 × 400 V, 50 Hz *AREAS OF APPLICATION* Electronics industry: Front panels, housings, membrane keyboards, PCB milling, test adapters Aerospace: Aluminum sheet and profile machining Advertising technology / Trade fair construction: Sign machining, profile machining Medical technology: Precision parts, fixtures Automotive supplier industry: Precision CNC machining Printing industry: Hot stamping dies, embossing tools General: Prototypes, contract manufacturing, aluminum, non-ferrous metals, plastics, composites *TERMS OF SALE* Price: 150,000 € net (plus 19% VAT) – fixed price New price of the machine: approx. 200,000 € Inspection: Under power – possible by appointment Dismantling / Transport: By the buyer (crane loading possible upon agreement) Invoice: A regular invoice will be issued Warranty: None (commercial sale with exclusion of liability for defects) Reason for sale: Strategic shift to steel machining – new purchase planned If you are interested or have any questions, please do not hesitate to contact us. Inspection under power is possible at any time by appointment. Ernst Neumärker GmbH & Co. KG Lohstraße 13 58675 Hemer

Condition: new, Machining center with 4 CNC-controlled axes for machining profiles made of aluminum, PVC, and steel Comparable to Emmegi, Elumatec, Fom, Pertici, etc. Machine frame in a stable welded construction, stress-relieved by annealing, with hardened linear guides Protective cabin covering the entire machining length Pneumatically opening protective door Milling spindle: 3.8/4.6 kW S1/S6 3.0/3.7 Nm S1/S6 max. 18,000 rpm, air-cooled with ISO 30 tool holder with minimum quantity lubrication system for the tools with level monitoring Tool magazine: 5 positions, on the left side in the machine bed, for holding drilling, milling, threading tools, angle head, and disc cutters up to Ø 150 mm Workpiece clamping: 4 pneumatic profile clamps, clamping range up to 250 mm automatic positioning via device on the Z-axis Workpiece positioning: one pneumatic reference stop each on the left and right on the A-axis Travel distances: X-axis 3500 mm Y-axis 370 mm Z-axis 348 mm A-axis ±90° Travel speeds: X-axis 70 m/min. Y-axis 30 m/min. Z-axis 30 m/min. A-axis 60°/sec Maximum working areas: X-axis 3270 mm Y-axis 250 mm at 0°, 116 mm at ±90° of the A-axis Z-axis: 170 mm at 0°, 200 mm at ±90° of the A-axis Operating software: CAD/CAM in 3D technology (option, included!) Programming system according to ISO standard Functionality: Linear and circular interpolation on two axes (X-Y) Three-sided machining by swiveling the A-axis 90°-0°-90° End face machining using disc cutters Operating modes: One profile bar over the entire machining length Two profile bars in divided machining length Lubrication system: Automatically controlled central lubrication for all axes, ball screws, and guides, with level monitoring Operation: 18.5" TFT Mouse + keyboard Connection data: Electrical: 400 V/50 Hz (3-phase + N + PE), 16 A, Delivery without power cable Hodpfxewrcwps Aahsp Pneumatic: Pressure 6 - 8 bar Dimensions and weight: Length: 5800 mm Width: 1640 mm Height: 2000 mm Weight: 2000 kg incl.: Graphical programming software CM3D/CAD3D Barcode reader Teleservice with remote maintenance/diagnosis for 1 year after commissioning

Condition: good (used), Year of construction: 2010, functionality: fully functional, We offer you: CNC vertical turning center Manufacturer: EMAG Type: VSC 250 Duo DD Year of manufacture: 2010 / 2012 Control system: Siemens 840D sl Technical data: Max. turning diameter: 250 mm Max. swing diameter: 260 mm Main spindle: Hedpfx Aaozdbv Tehjp Max. speed: 4,500 rpm Max. torque: 250 / 340 / 460 Nm Spindle bore: 52 mm Chuck diameter: 250 mm Tool turret: Number of turrets: 2 Number of tool positions: 12 Max. tool diameter: 50 mm Max. workpiece weight: 20 kg Max. workpiece diameter: 240 mm Feeds: Rapid traverse (x / z): 45 / 30 m/min Total power consumption: 66 / 75 kW Machine weight: approx. 16 / 18.5 tons There are 3 identical machines available, 2 manufactured in 2010, 1 in 2012. Technical features & accessories: - Marposs measuring system - Open automation - W10 loading portal - Safety guard - Minimum quantity lubrication - In-process quality control - Central coolant supply (not included) - Chip conveyor Accessories, tools and clamping devices shown in the images are only included in the scope of delivery if this is stated in the additional information. Subject to change and errors in the technical data and information, as well as prior sale!

Condition: used, Year of construction: 2019, operating hours: 6,617 h, functionality: fully functional, machine/vehicle number: 1163744, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, rapid traverse X-axis: 18,000 m/min, rapid traverse Y-axis: 18,000 m/min, rapid traverse Z-axis: 18,000 m/min, feed length X-axis: 1,016 mm, feed length Y-axis: 660 mm, feed length Z-axis: 630 mm, feed rate X-axis: 12,700 m/min, feed rate Y-axis: 12,700 m/min, feed rate Z-axis: 12,700 m/min, nominal power (apparent): 45 kVA, torque: 460 Nm, controller manufacturer: Haas, controller model: Haas, workpiece length (max.): 1,370 mm, workpiece width (max.): 610 mm, workpiece height (max.): 630 mm, workpiece weight (max.): 1,814 kg, total height: 630 mm, total length: 1,370 mm, total width: 660 mm, table width: 610 mm, table height: 630 mm, table length: 1,372 mm, table load: 1,814 kg, operating hours of spindle: 4,373 h, spindle motor power: 44 W, number of slots in tool magazine: 30, Equipment: chip conveyor, • Haas VF-3YT/50, 2019. • 10,000 rpm original high-performance spindle, 44.7 kW, vector drive, gearbox • 2-speed gearbox • ISO 50 tool holder • 30 ATC (Automatic Tool Changer) • Chip conveyor with 4 additional lead screws • RTAP-3 – Synchronized threading without expensive holders, with compensation • TSC 300 psi (21 bar) • Coolant chiller • Programmable coolant nozzle • MIN QTY LUBE (Minimum Quantity Lubrication) • Automatic air gun Hodpfx Aozc Ni Sjahep • TAB – air cooling through the spindle • Renishaw WIPS – measuring, scaling, rotation • High-Speed Machining • ACF 25-micron filter • Electrical cabinet cooler • Mist condenser • 4th-axis pre-wiring • DWO/TCPC • WIFI connection to local network • WIFI camera • Auto Door • 15 tool holders • 4,373 hours of cutting (Spindle On Time) • 6,617 hours of cycle time Machine is powered on and available for inspection at any time. Complete documentation available. Original paint, no accidents, no crashes. Regularly maintained machine. Immediate availability.

Condition: good (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 117004, total length: 7,500 mm, total width: 1,200 mm, total height: 2,000 mm, overall weight: 2,500 kg, KALTENBACH SKL 400 H Cold Circular Sawing Machine (completely overhauled) - Operating voltage: 400 V - Frequency: 50 Hz Hedpsy Dcu Eofx Aahjp - Rated current: 20 A - Saw blade: 400 x 4 x 50 mm - Saw blade mount: 50/4 x 14/80 mm - Working range, round material 90/45°: 130 mm - Square material 90°: 120 mm - Profiles 90°: 300 x 45 mm - Profiles horizontal 45°: 220 x 60 mm - Profiles vertical 45°: 80 x 120 mm - Saw motor: 3.7 / 4.5 kW - Cutting speed: 1750 / 3500 m/min - Saw blade feed: 0 - 3700 mm/min - Saw blade rapid return: 4500 mm/min Additional equipment: - Workpiece clamping with short stroke vise: stroke 8 mm - With hand crank for presetting - Machine overhauled and newly painted - Horizontal clamping cylinder front, each - Minimum quantity lubrication instead of coolant spray system - T3 feeder roller conveyor with rollers 60 x 289 mm - One starter section: 2000 mm, with 5 rollers, one support leg, one mounting angle - One extension section: 2000 mm, with 4 rollers, one support leg, one stop roller, adjustable as a guide for material bars - Length measuring device including T3 discharge roller conveyor Note: The item must be collected by binding appointment between 07 and 09 July 2026 (exact date to be agreed). FCA D-71263 Weil der Stadt – loaded onto truck

Condition: used, Year of construction: 2008, • Commissioned: 2008 • Travel ranges X600 / Y450 / Z450 Hsdpfx Aajzampqshep • Heidenhain iTNC 530 control system • Electric handwheel • Step-Tec HSK A63 spindle with 20,000 rpm • Internal cooling, 70 bar • 120-position tool magazine (ATC) • 7-position pallet changer, 3R 280 x 280 Dynafix • Blum laser tool measurement system • 3D probing system, M&H • Minimum quantity lubrication system • Band filter system, 600 liters • Chip conveyor • Visiport The machine will be available in October 2026.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, saw blade diameter: 400 mm, cutting height (max.): 145 mm, cutting range round steel at 45°: 120 mm, type of input current: AC, Robust cold circular saw with pneumatic workpiece clamping Clamping, sawing, return to initial position, opening in automatic mode Hsdpfxoy Httdo Aahjp Stepless feed rate adjustment Minimum quantity lubrication system + coolant unit Saw blade diameter from 375 to 425 mm Mitre adjustment 45° - 90° - -45° - -30° Cutting capacity with saw blade diameter 400 mm: Flat: 210 x 120 mm Mitre cut: 145 x 120 mm Round: 140 mm diameter Mitre cut: 120 mm Pole-changing three-phase motor for saw blade – circumferential speed 22 + 44 m/min Voltage: 400 V

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Meba Mebamat 330 Automatic Metal Bandsaw Manufacturer: Meba Type: Mebamat 330 Year of manufacture: 2018 Hsdpfoy Uzg Ujx Aahjp Condition: used, very good Bundle cutting device, hydraulic Material support table with rollers, approx. 3.5 meters Bar starting system with laser measurement Diameter detection with laser measurement Large material database with automatic cutting speed calculation Additional minimum quantity lubrication system with oil mist Reduced remaining piece length of approx. 50mm LED machine light External rinsing gun for cleaning parts and the machine Clamping pressure adjustment for cutting thin-walled tubes Spiral chip conveyor

Condition: new, thread dia. bis M 36 turning speeds max. 150 U/min thread M5 - M36 working area 2050 Rmax. work height max. 900 mm table surface area 700 x 900 mm oil volume 100 l engine output 4.0 kW weight - pallet system 320 kg equipment: - electro-hydraulic tapping machine - Large working range (max. radius 2050 mm) * Smooth swivel movement, e.g. due to built-in gas pressure dampers Hodsy Umd Eepfx Aahop - Mobile machine base frame * Oil tank hydraulic unit integrated in the base frame * Hydraulic pressure gauge - Vertical / horizontal thread cutting possible - Connection cable with 16A plug * Special accessories included in the scope of delivery : - Tap quick-change inserts according to "DIN 376" . M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M 22 . M27 / M30 / M33 / M36 - Infinitely variable speed adjustment incl. digital display - Minimum quantity lubrication (spray oiler/compressed air) - T-slot clamping table - Tapping head can be fixed with magnetic quick-action insert

Condition: new, thread dia. bis M 24 turning speeds max. 280 U/min thread M5 - M24 working area 2050 Rmax. work height max. 900 mm table surface area 700 x 900 mm oil volume 100 l engine output 3.0 kW weight - pallet system 280 kg Equipment: - electro-hydraulic tapping machine - Large working range (max. radius 2050 mm) * Smooth swivel movement, e.g. due to built-in gas pressure dampers - Mobile machine base frame Hsdoy Umdljpfx Aahjp * Oil tank hydraulic unit integrated in the base frame * Hydraulic pressure gauge - Vertical / horizontal thread cutting possible - Connection cable with 16A plug * Special accessories included in the scope of delivery : - Tap quick-change inserts according to "DIN 376" . M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M22 - Infinitely variable speed adjustment incl. digital display - Minimum quantity lubrication (spray oiler/compressed air) - T-slot clamping table - Tapping head can be fixed with magnetic quick-action insert