Used Soraluce Cnc Travelling Column Maching Center for sale (40,724)

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Hfjdotrhq Hjpfx Agtel Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Condition: used, Year of construction: 2016, A Licon 5-axis CNC machining center with double trunnion is offered. Travel X/Y/Z: 750mm/660mm/650mm, rapid traverse X/Y: 60m/min, rapid traverse Z: 90m/min, spindle distance: 750mm, motor spindles: 2, max. spindle speed: 12000rpm, spindle power: 37kW, max. torque: 100Nm, tool holder: HSK-A63, tool positions: 96, max. tool diameter: 250mm, max. tool length: 400mm, control: Siemens SINUMERIK 840D sl, automatic mode operating hours: approx. 40148h. Including double trunnion with two torque-driven B-axes, coolant system, MQL system, high-pressure through-spindle coolant and tool identification. Motor spindle 11 was replaced in 2024 and motor spindle 12 in 2023. Commissioning: 2017. The machine was dismantled and preserved at the end of 2024 and is currently in storage. Documentation available. An on-site inspection is possible. Hfsdpfx Aez Agg Hjgtsl

Condition: used, Year of construction: 1995, x-travel 3500 mm y-travel 1600 mm z-travel 900 mm turning speeds 20-2000 U/min spindle taper ISO SK50 Table dimensions 5000x1000 mm control Heidenhain TNC 415B spindle drive motor 22 kW rapid traverse 5000 mm/min Table load 12500 kg range L-W-H 7,3x4x3,2 m milling head -swivable +/- CNC 360 ° Hodpeyt R Ahofx Agtefl weight of the machine ca. 16 t No. 108141 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Equipment: documentation/manual, CNC-controlled vertical machining center AXA VSC-3-3000-M Year of manufacture: 1995 Control system: Heidenhain TNC 407 Technical data: X-axis travel: 3000 mm Y-axis travel: 420 mm Z-axis travel: 480 mm Table size: approx. 3000 x 500 mm Spindle connection: SK40 Speed range: up to 6000 rpm 22-tool automatic tool changer Coolant system Heavy-duty frame construction Special features: Additional angular/universal milling head 4-/5-axis machining possible Flexible machining of complex workpieces Ideal for toolmaking, mechanical engineering and single-part production The machine is in good condition. Hfsdpfoy U Hy Tex Agtol Inspection under power is possible by arrangement.

Condition: ready for operation (used), Year of construction: 2020, operating hours: 7,597 h, functionality: fully functional, machine/vehicle number: NL257200651, turning diameter: 366 mm, spindle speed (max.): 4,000 rpm, controller model: Mitsubishi 730UM CELOS, working length: 700 mm, number of slots in tool magazine: 12, TECHNICAL DETAILS Maximum machining length: approx. 700 mm Maximum turning diameter: 366 mm Workpiece length with tailstock: max. 728 mm Spindle speed: max. 4,000 rpm Tool turret: 12-position BMT60 star turret Tool drive: 40 / 14 Nm Speed of driven tools: max. 10,000 rpm Overhang length of driven tools: 100 mm Chuck: 10" hollow chuck, Ø 254 mm Chuck cylinder: hollow chuck cylinder BB210A821 Tailstock: NC tailstock Tailstock taper: MK 5 MACHINE DETAILS Coolant type: water-miscible coolant / emulsion Coolant pressure: 5 bar Extraction connection: Ø 150 mm Mains voltage: 380 V Frequency: 50 Hz Transformer power: 45 kVA Phases: 3 phases Isolation transformer: 400 V ± 5 % Current: 65 A Control system: Mitsubishi 730UM CELOS User interface: CELOS with ERGOline touch panel Machine operating time: 7,597 h Program runtime: 2,138 h Hfsdpfszy Hx Djx Agtjl Last maintenance: April 2024 Weight: 5,800 kg EQUIPMENT DMG MORI M730UM control system with CELOS ERGOline touch panel 12-position BMT60 star turret with driven tools 10" hollow chuck, Ø 254 mm Hollow chuck cylinder BB210A821 Double foot switch with protective cover NC tailstock with MK-5 mount Oil-air cooler for circulating spindle coolant Hinged belt chip conveyor High-pressure coolant system, 5 bar Oil mist separator AFS 1100 including interface Manual, swiveling tool pre-setter SCHNEIDER transformer 45 kVA Technology cycle "Alternating Speed" Further technical data can be found in the document attached!

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 00820002981, turning length: 800 mm, turning diameter: 500 mm, spindle speed (max.): 3,600 rpm, spindle bore: 118 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 30 m/min, bar passage: 102 mm, total height: 2,500 mm, total length: 8,000 mm, total width: 2,400 mm, overall weight: 10,000 kg, controller manufacturer: DMG, controller model: ERGOLINE, input voltage: 400 V, input frequency: 50 Hz, input current: 125 A, nominal power (apparent): 74 kVA, operating hours of spindle: 4,439 h, Equipment: chip conveyor, DMG MORI CTX BETA 800 TC CNC turning and milling center - Note: the spindle hours may increase slightly! - Swing diameter: 500 mm - Distance between centers: 1020 mm - Max. workpiece weight (chuck parts/chuck weight): 100 kg - Max. workpiece center of gravity from spindle flange: 120 mm - Travel X1: from -10 to 490 mm - Travel Y1: +-100 mm - Travel Z1: 845 mm - Travel Z2: 600 mm - Travel Z3: 800 mm - Spindle flange diameter: 220 H 5 mm - Chuck diameter: 315 mm - Diameter of front bearing: 160 mm - Rapid traverse speed, Z-axis: 40 m/min - Resolution, Z-axis: 0.001 mmm - B-axis max. swivel speed: 70 rpm - Angular resolution: 0.001° - Tailstock travel: 800 mm Hsdszxx Dcepfx Agtofl - Quill force: 8 kN The machine is equipped with a tailstock and a three-jaw chuck, diameter: 250 mm, as well as a chip conveyor and coolant system. FCA D-63843 Niedernberg - loaded onto a truck.

Condition: ready for operation (used), A Deckel Maho CNC vertical machining center is available. Travel X/Y/Z: 1000mm/600mm/600mm, table dimensions X/Y: 1200mm/600mm, max. table load: 800kg, spindle speed: 8000rpm, power: 13kW/9kW, torque: 57Nm/83Nm, feed rate: 30m/min, rapid traverse: 30m/min, tool stations: 24, tool holder: SK40. Machine dimensions X/Y/Z: approx. 3200mm/2600mm/2700mm, weight: approx. 6500kg. Documentation available. An on-site inspection is possible. Hedpfozmym Ijx Agtjfl

Condition: good (used), Year of construction: 2020, 5-axis CNC machining center - universal - Manufacturer: MAZAK Machine model: Variaxis J-500 Control system: Mazatrol SmoothG Year of manufacture: 2020 Number of controlled axes: 5 TECHNICAL DATA Travel ranges - X-axis: (mm) 350 - Y-axis: (mm) 550 - Z-axis: (mm) 510 - Swivel range A-axis: (degrees) -120 / +30 - C-axis (rotary and swivel table): (degrees) 360 Feed rate X/Y/Z: (mm/min) 8,000 Rapid traverse rates - X-axis (mm/min) 30,000 - A-/C-axis: 10,800 degrees/min Spindle - Spindle speed max.: (rpm) 12,000 Hfjdpfszr Uudox Agtol - Drive power (ED) 100 / 40: (kW) 7.5 / 11.0 Tool magazine - Tool holder: BT40/CAT40 - Pull stud: Yamazaki ANSI type - Tool positions: 30 - Tool diameter: (mm) 90 - Tool length: (mm) 300 Machine table Swivel rotary table Pallet system - Pallet changer: 2-position - Clamping table dimensions: (mm) 500 x 400 Swivel rotary table - Rotary table diameter: (mm) 500 x 400 - Max. workpiece weight: (kg) 200 EQUIPMENT FEATURES + Internal cooling system 70 bar + Chip conveyor with scraper band + Oil mist extraction + Tool length measurement and tool breakage monitoring + Additional interior lighting + Signal light (3-color) Subject to changes and errors in the technical data and specifications.

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 183-89, CNC Vertical Machining Center Make: CHIRON Group Model: CHIRON FZ 12 W Year of manufacture: 1999 Hsdpfjy Sr Ikox Agtofl Machine No.: 183-89 Typical technical specifications of the CHIRON FZ 12 W: Machine type: Control system: usually Siemens 840D or Heidenhain X-axis travel: approx. 550 mm Y-axis travel: approx. 300 mm Z-axis travel: approx. 425 mm Table size: approx. 660 × 350 mm Table load capacity: approx. 500 kg Spindle speed: depending on version, 10,000 – 20,000 rpm Tool holder: SK40 or HSK-A63 Tool changer: 12–24 positions Rapid traverse: up to 60 m/min Main spindle power: approx. 10–15 kW Coolant system Central lubrication Fully enclosed safety cabin Machine weight: approx. 4,500–5,500 kg The machine is part of CHIRON's well-known FZ series and is especially suited for high-speed aluminum and steel machining.

Condition: used, As-new CNC Vertical Machining Center, Milling Machine VMC, BAZ, HSC Milling, Machining Center TAIKAN B540Z Serial No. 1171009 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Travel range for working area X: 488 mm, Y: 400 mm, Z: 230 mm X-axis travel for tool change position X: 540 mm Table size 520 x 400 mm Spindle taper ISO 25 Distance spindle nose - table 165 - 395 mm Max. spindle speed 36,000 rpm, infinitely variable Feed rate 0 to 10,000 mm/min Rapid traverse 15 m/min Table load capacity 200 kg Max. tool length 120 mm Max. tool diameter 80 mm Max. tool weight 0.8 kg Tool change time approx. 10 sec. Axis drives 0.8 kW each Spindle drive 3.5 kW at 100% duty cycle Electrical connection 400 Volt, 50 Hz, 7.5 kW CNC path control SIEMENS Sinumerik 828 D Basic - Software: NCU V04.05+SP06+HF01 - Interfaces: LAN, USB and CF-Card - Measuring system for tool setting: METROL tool sensor - Vertical milling spindle = high-frequency spindle with liquid cooling and external recooling unit - Tool changer with 13 tool stations - Electronic handwheel - Coolant system - Protective enclosure with sliding door - Central lubrication - incl. 10 tool holders ISO 25 with ER20 collet chuck and a set of collets Transport dimensions (L x W x H): 1800 x 1500 x 2300 mm Weight: 2,900 kg Excellent condition – as new Hodpfx Agjw Ed U Nstefl Machine comes from a showroom with very few operating hours.

Condition: used, Year of construction: 2013, x-travel 30000 mm y-travel 3600 mm z-travel 1900 mm Control Heidenhain type TNC 530 i turning speeds 4000 U/min conus taper DIN 69871+AD mm Feed 10000 mm/min spindle drive 46 kW Rapid movement 25000 mm/min chip conveyor 2 St. Plate area 31000x2500 mm total power requirement 85 kW Soraluce No. 5619 Load hours 9332 On-time hours 27960 Hsdpfjyqtnnjx Agtefl Panel array consists of: 1 panel 7000x2500 mm 4 panels 6000x2500 mm Optional: 4x clamping angles Tool package Clamping table The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), A CNC horizontal machining center by Spinner is offered, equipped with a twin spindle and two dual tool changers. Travel X/Y/Z: 1000mm/850mm/850mm, distance from spindle center to pallet front face: 100-950mm, distance from spindle nose to table surface: 150-1100mm, rapid traverse X/Y/Z: 32m/min, pallet size: 2×630×630mm, max. pallet load: 1000kg, distance to table: 360mm, table top height above floor: 993mm, door opening: 1200mm, table threads: M16, tool interface 1/2: SK40/SK50, max. speed 1/2: 10000rpm/6000rpm, power S1 1/2: 22kW/22kW, power S3 1/2: 26kW/26kW, max. torque S1 1/2: 139Nm/556Nm, max. torque S3 1/2: 164Nm/656Nm, tool stations 1/2: 60/40, max. tool diameter 1/2: 80mm/115mm, max. tool weight 1/2: 8kg/20kg, control: Fanuc 0i. Machine dimensions X/Y/Z: 5970mm/3470mm/3362mm, weight: approx. 23000kg. Documentation available. Inspection by appointment possible. Hjdpezipgcofx Agtsfl

Condition: used, CNC Gantry-Type Boring and Milling Machine ANAYAK Type HVM-3800-P Bed type milling machine, structure similar to a plate-type boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 ("Refurbished 2025") The machine will be completely workshop overhauled in 2025 and can then be inspected in storage at 37235 Hessisch Lichtenau. Travel distances: X: 3,200 mm, Y: 1,200 mm, Z: 1,500 mm Table size: 3,800 x 1,200 mm T-slots: 8 pieces, 22 mm, spacing 130 mm Table load: max. 25 tons (stationary table – virtually unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (drawbar: DIN 69872-B) Spindle speed: 60 – 4,000 rpm, stepless Feed rate: up to 10,000 mm/min, stepless Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Electrical connection: 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal milling head fully automatic swiveling in two 45° planes – B+C axis - HEIDENHAIN iTNC 530 control, with electronic handwheel - Prepared for wireless touch probe (probe and receiver not included) - Additional HF-spindle, 18,000 rpm – for attachment - Free-standing control cabinet - Chip conveyor positioned between the gantry bed and the machine table - 32,078 operating hours recorded - Coolant system - Free-standing hydraulic unit - Operating manual with circuit diagrams Installation area (L x W): approx. 1,000 x 700 cm Hfodexcgtgjpfx Agtjl Installation height: approx. 410 cm Weight (total): approx. 33 tons Good condition

Condition: used, Year of construction: 2022, x-travel 2.600 mm y-travel 1.100 mm z-travel 900 mm control 840 D sl Celos Siemens turning speed range - main spindle 20 - 20.000 min/-1 power capacity - main spindel 35 kW max. Torque 120 Nm tool taper SK 40 DIN 69871 swivellable B: +/- 100 ° table surface area 3.200 x 1.100 mm max. table load 4.000 kg max. workpiece height 972 mm rotary table dia. 1.050 mm C-Axis 360 ° max. workpiece weight 1.200 kg number of toolpositions 120 pos. tool taper SK 40 DIN 69871 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 40 m/min feed speeds max. 40.000 mm/min feed power XYZ: 12 / 10 / 12 kN total power requirement 68 kVA weight of the machine ca. 28 t dimensions of the machine ca. 9,0 x 6,0 x 3,3 m Hjdpfezqvmxex Agtsfl 5 Axis CNC - Travel Column Milling Machine DMG-MORI - DMF 260 11 - Swivel-Millinghead (B-Axis) - NC rotary table (C-axis) - only approx. 4,930 spindle hours - only approx. 15,000 power-on hours - WITHOUT clamping devices, WITHOUT tools

Condition: ready for operation (used), A Maka 5-axis CNC machining center for aluminum, plastic, or wood in need of repair is offered. Travel path X/Y/Z: 2500mm/1500mm/650mm, max. fixture height: 180mm, rapid traverse X/Y/Z: 60m/min, C-axis rotation: 540°, A-axis swivel: +/-98° (196° total range), number of work tables: 2, table size per table: 2500mm x 1500mm, magazine capacity: 20 tools per magazine, total tool positions: 2x20. The drive motor of the Z-axis is defective. Inspection possible by appointment. Hodpozcyq Hofx Agtefl

Condition: used, Year of construction: 2012, machine/vehicle number: 51357, overall weight: 14,000 kg, No minimum price – guaranteed sale to the highest bidder! Hfodjzy Ui Repfx Agtol The machines are still assembled but disconnected from the power supply. An 11-ton forklift is available on-site for loading. For sale is a horizontal machining center manufactured by Samag, model: SM. TECHNICAL DETAILS Type of machining: Internal machining MACHINE DETAILS Total weight: 14,000 kg

Condition: used, Year of construction: 2013, Technical details: x-travel: 30000 mm y-travel: 3600 mm z-travel: 1900 mm Hsdpfovmzihex Agtsfl milling head speed: 1 - 4000 U/min spindle taper ISO: 50 feed speeds: 1 - 10000 mm/min rapid traverse: 25 m/min milling spindle motor: 46 kW total power requirement: 85 kW dimensions of the machine ca.: 45 x 8,7 x 5,5 ü.F. m with CNC HEIDENHAIN iTNC 530 autom. milling head indexing 2,5° floor plate field 31000 x 2500 mm ( 4 floor plates 6000 x 2500 mm + 1 floor plate 7000 x 2500 mm ) 2 chip conveyors, coolant attachment *

Condition: used, Year of construction: 2007, Machine design: Cantilever machine Travel in X-direction: 5000 mm Travel in Y-direction: 1815 mm Travel (Z-axis): 600 mm Clearance height: 370 mm Number of main spindles: 1 Main spindle power: 12 kW Main spindle speed: 600-24000 rpm Vector-controlled spindle: Yes Clamping system: HSK-63 F Spindle cooling: Liquid cooling Number of axes: 5 Tool changer: Disc tool changer Tool change positions: 24 Back wall milling units: Yes Vertical drilling spindles – in X-direction: 12 Spindle speed vertical drilling spindle: 2000-6000 rpm Horizontal drilling spindle in X-direction: 2 + 2 Horizontal drilling spindle in Y-direction: 1 + 1 Spindle speed horizontal drilling spindle: 2000-6000 rpm Monitor size: 15" Control type: PC control Operating system: Windows XP Typewriter keyboard: Yes Mouse: Yes Programming system: xilog Plus Hfodpfx Agszwg H Aotsl DXF interface: Yes Online connection possible: Yes CD-ROM drive: Yes Floppy disk drive: Yes Table design: Console table, tubeless Stop system: Stop cylinders Support arms: 8 Suction plates and clamps: various included Linear guides: 2 Number of vacuum pumps: 1 Vacuum pump capacity: 250 m³/h Alternating field configuration: Yes Safety guard, left: Yes Safety guard, right: Yes Extraction hood: controlled via axes Setup aid: Dot laser setup aid Safety features: Safety floor mats Central lubrication: automatic Tools: various tools available at an extra charge Dimensions: 7820x4730 mm Extraction diameter: 300 mm Storage location:

Condition: good (used), Year of construction: 2008, Ref. -No.: 10335 Manufacturer: HüLLER HILLE Type: NBH 170 Year of construction: 2008 Type of control: CNC-Steuerung Control: Sinumerik 840D pl Storage location: Halberstadt Country of origin: Germany X-Travel: 1000 mm Y-Travel: 800 mm Z-Travel: 800 mm B-Axis: 360 ° Distance spindle center - table: 150 mm Table Dimensions (Lengthxwidth): 500 x 630 mm Table Load: 800 kg Max. Workpiece Weight: 40 kg Max. Tool Length: 650 mm Max. Tool Diameter: 325 mm Workpiece Diameter At Full Load: 100 mm Tool Taper: HSK - 100 Spindle Speed: RPM Hsdpfezkpuvex Agtjfl Rapid Traverse: 60 m / min Machine length: 9500 mm Machine width: 4500 mm Machine Height: 3500 mm Further information: Coolant system = 1250 l

Condition: used, Year of construction: 2008, operating hours: 82,646 h, functionality: fully functional, Dismantling, loading, and transport are the responsibility of the buyer. Sale excludes extraction equipment. Hfsdpfxszzvvuo Agtsl Sale excludes tools and attachments. Sale is limited to within the EU.

Condition: new, Year of construction: 2026, P5 Retrofit CNC milling center for 5-axis machining of thermoformed parts. Working area (cube dimensions): X-axis: 600 mm Y-axis: 800 mm Z-axis: 400 mm, with a fixture height of 120 mm. All specifications are based on a tool length of 60 mm from the front edge of the collet nut. Max. shank diameter: 10 mm (ER16 mini collet). Table design: 1 piece aluminum flat table, size: 600 x 800 mm, with threaded bushings. Vacuum supply: 1 piece vacuum clamping circuit on the table, vacuum distribution pipe with 3 x quick-release couplings NW 7.2, digital pressure monitor. 1 piece vacuum pump, suction capacity approx. 40 m³/h. Milling spindle: 1 piece milling spindle (double spindle), air-cooled, 2 x ER16 mini collet chucks, power 2.5 kW, max. speed 27,000 1/min. Axis drives: Ball screw in the X / Y axis and Z axis; A / B axes with hollow shaft drives. Rapid traverse speeds X / Y axis => 45 m/min Z axis => 45 m/min Hsdpfxszzzrhs Agtefl Rotary / swivel axis => 12,000°/min. Acceleration (max.) => 2 m/sec² All axes are equipped with digital technology and absolute measuring systems. This eliminates the need for a reference run at the start of operation. Machine control: 1 piece BWO VEKTOR C Basic Plus Robot machine control. The complete unit is housed in an enclosure with a 15-inch capacitive touchscreen, which is mounted on the front of the machine. 64 MB NC memory USB interface Safety features: The machine is equipped with a robust sheet metal guard, with a separate access door for the rear of the machine; the guard is open at the top. 1 piece sliding door (manually operated), to demarcate the working area. Availability: The machine is operational and can be inspected immediately. Available from stock, delivery and installation can be arranged on short notice. Price on request, please request our offer.

Condition: used, Year of construction: 2018, workpiece weight (max.): 35,000 kg, total length: 15,600 mm, total height: 6,000 mm, total width: 6,000 mm, overall weight: 155,000 kg, The Pittler WMZ PV4000 / 1-2 is a heavy CNC vertical turning machine with a portal design, featuring one workpiece spindle and two independently movable tool carriers. The machine enables turning, drilling, milling, and grooving. The right tool carrier is designed as a swiveling multifunction head with a B-axis and driven tools. Two separate chain magazines provide a total of 94 tool positions. Technical Data Hsdpozwa Rbsfx Agtefl Machine Number: ZV029 Machine Concept: Portal machine with one workpiece spindle and two tool carriers Machining Processes: Turning, drilling, milling, and grooving Maximum Swing Diameter: 3800 mm Maximum Workpiece Diameter: 3800 mm Maximum Workpiece Speed: 100 min-1 Rated Speed: 36.7 min-1 Workpiece Clamping: Manual Chuck: Röhm Tool Holder: Capto C8 Tool Magazines: 2 chain magazines Tool Positions: 2 x 47 Total Number of Tool Positions: 94 Maximum Tool Diameter: 120 mm according to the operating manual Maximum Tool Diameter: 150 mm according to the order confirmation with appropriate magazine loading Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Travel Paths X1-Axis Right Tool Carrier: 3200 mm X2-Axis Left Tool Carrier: 2800 mm Z1-Axis Right Tool Carrier: 1000 mm Z2-Axis Left Tool Carrier: 1000 mm Rapid Traverse X-Axes: up to 32 m/min Rapid Traverse Z-Axes: up to 20 m/min Workpiece Spindle Gear Reduction: 1 to 30 Maximum Speed: 100 min-1 Rated Speed: 36.7 min-1 Rated Power: 67.4 kW Short-Term Total Power: 202.2 kW Rated Torque: 52.65 kNm Maximum Drive Torque: 71.55 kNm Torque according to Order Confirmation: 67000 Nm at 40% duty cycle Motor Spindle Power according to Order Confirmation: 200 kW at 100% duty cycle Maximum Spindle Load Capacity including Chuck, Clamping Jaws, and Workpiece: 35000 kg Spindle Flange Diameter: 1900 mm Thrust Bearing Diameter: 1400 mm The workpiece spindle is designed as a water-cooled motor spindle with precision axial deep groove ball bearings. Tool Carrier and Multifunction Head The right tool carrier features a swiveling multifunction head with two Capto C8 holders for turning tools as well as drilling and milling tools. B-Axis for Stepless Positioning Swivel Range: 180 degrees Speed of Driven Tools: up to 6000 min-1 Tool Spindle Torque: approx. 120 Nm at 100% duty cycle Hydraulic Clamping Direct Measurement System Direct Coolant Supply High-Pressure Coolant Supply: up to 70 bar Tool Magazines Two chain magazines with 47 tool positions each Tool Holder: Capto C8 Maximum Tool Diameter: 120 mm Up to 150 mm with appropriate magazine loading Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Tool Cleaning with Blowing Air Manual Magazine Loading Coolant and Chip Disposal Two Knoll Chip Conveyors Type 600 S-2/120 Knoll Band Filter Type KF400-2300 Additional Equipment Röhm Chuck Spindle Cooling Hydac FLKS-4S Hydraulic Unit Hydac TBM20 Electrical Data Operating Voltage: 3 x 400 VAC Protection Class: IP55 Maximum Power Consumption: 280 kVA Component weight max.: 35,000 kg Swing: 3,800 mm Rotation height max.: 2,100 mm Weight approx.: 155,000 kg Dimensions (LxWxH) approx.: 15600 x 6000 x 6000 mm Table diameter: 3,800 mm Control: Siemens SINUMERIK 840D sl Year of construction: 2,018 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: used, Year of construction: 2007, KIWA JAPAN KH-45 Horizontal center 4 axes Fanuc 31i control Year 2007 XYZ -640 x 610 x 680 B-360 degrees Table 400 x400 Magazine 60 tools Taper BT40 Spindle 12000 rpm Spindle motor 22.4 kw Hsdpfjvnzgisx Agtofl Machine dimensions 4540 × 2400 x 2584 length width height Weight 9200 kg

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, Technical data: TABLE Table surface 700 x 350 mm Table height from floor 835 mm T-slots 16 mm x 63.5 mm / 4 pcs. Workpiece weight max. 350 kg Travel ranges: X 610 mm Y 355 mm Z 460 mm Distance from spindle center to column surface 415 mm Distance from spindle nose / table min. 70 mm / max. 530 mm SPINDLE Spindle mounting SK 40 / DIN 69871 (draw bolt: DIN 69872) Spindle speeds, stepless 10000 rpm Spindle drive motor Siemens: 7.5 / 11.0 kW AXIS FEED, digital feed motors, direct drives All 3 feed motors are directly flange-mounted. Drive without timing belt! Manufacturer of ball screws: HiWiN X-axis Feed motor: Siemens Ball screw: Ø 32 x 10; C 5 Y-axis Feed motor: Siemens Ball screw: Ø 32 x 10; C 5 Z-axis Feed motor: Siemens Ball screw: Ø 32 x 10; C 5 FEED RATES: Rapid traverse: 20 m/min for X and Y-axis, 18 m/min for Z-axis Feeds: X - Y: 1-10 m/min. ACCURACY Positioning: (within 300 mm) +/- 0.005 mm Repeatability: +/- 0.004 mm TOOL CHANGER Tool mounting: DIN 69871 with draw bolt DIN 69872 Changer system standard: disc changer without arm Capacity: 10 tools Change time: approx. 20 seconds max. Max. tool weight: 7.0 kg Largest tool diameter: 93 (120) mm Max. tool length: 300 mm AIR SUPPLY Required pressure: 6.5 bar Air consumption: 300 l / min. Standard accessories: - CNC control SIEMENS 828 D with "SHOPMILL" user interface - Large selection of milling and drilling cycles - Machining cycle for contour pockets / contour ribs with islands, etc. - Graphic functions - Tool management - User CF card on the control panel front - RS 232 C interface - USB interface on the control panel front - RCS-Commander: front ETHERNET interface for notebook PC - 100 Mbit/sec. TCP / iP ETHERNET interface for connection to a company network - Portable electronic handwheel Hfedpfx Agszcazxotol - Tapping without compensation chuck (Rigid Tapping) - Spindle orientation - Color screen (LCD) 10.4" - Manual in all 3 axes - Semi-automatic with manual feed operation - Automatic with cycle function, CNC operation without CNC knowledge - ISO programming - Linking of cycle programs and ISO programs - Large memory for created programs - Full enclosure (CE) - Heat exchanger for the control cabinet - Automatic tool clamping - Automatic tool changer with 10 tools - Spindle air blow-out - Coolant system incl. oil separator - Automatic central lubrication - Work light - Electronic handwheel for all 3 axes - CE conformity, EMC filter - 24 months full warranty Siemens "RSV" - Two-tone paint: white RAL 7035, black RAL 7021 - Increase in spindle speed to 10000 rpm - Chip conveyor in hinge chain design - Coolant supply through the milling spindle (internal cooling) with 20 bar high-pressure pump = 55 l/min., separate tank - Automatic tool changer without arm with 16 tools - Preparation for 4th axis

Condition: ready for operation (used), Year of construction: 2002, A Fehlmann CNC machining center that was used in the ceramics industry is available. Travel X/Y/Z: 700mm/420mm/610mm, speed: 20000rpm, tool holder: SK30, tool positions: 48, spindle power: 9kW, torque: 70Nm, table dimensions X/Y: 1260mm/490mm, weight: approx. 5200kg, control: Heidenhain TNC 430M. The C key has a fault on the ATS swivel apparatus regarding the amplitude. The ball screws of the X and Y axes were recently replaced. Without extraction system. Documentation available. An on-site inspection is possible. Hjdpfx Agsy H I Euotofl