Used Single-Column Eccentric Press for sale (22,849)

Condition: used, pressure 80 t throat 320 mm stroke 8 - 112 mm table surface area 830 x 600 mm no. of strokes 30 - 85 Hub/min ram surface 650 x 400 mm ram adjustment 71 mm clamping plate 990 x 550 mm table height over floor 810 mm table height over floor 800 mm column daylight (vorn) 680 mm column daylight (hinten) 520 mm total power requirement 7,5 kW weight of the machine ca. 7,7 t dimensions of the machine ca. 1,5 x 2,2 x 3,15 m Equipment: - with wheel presentation - fixed table Machine was/is partially overhauled: - Complete disassembly and inspection - Table and ram surfaces milled - New seals and hydraulic hoses - new main engine - the two main bearing bushes, the bushing of the 3rd bearing and the connecting rod bushing are new - Shaft machined and booked out Nwodstqm Dmjpfx Ag Njk - Painting - new control cabinet with PLC and touchscreen including cabling. - Current UVV test with braking time measurement

Condition: used, Year of construction: 1980, Technical details: Pressure: 160 t stroke: 20-160 mm throat: 400 mm ram adjustment: 120 mm no. of strokes: 71 Hub/min daylight dimension : table/slide up: 720 (bei Hub 160mm) mm daylight dimension : table/slide low: 560 (bei Hub 160mm) mm ram surface area: 900 x 660 mm distance between columns: 500 x 450 mm table surface area: LxBxØ: 1200 x 750 x 100 mm total power requirement: ca. 23.0 kW weight of the machine ca.: ca. 15,0 t dimension machine xH: 2,7 x 1,5 x 3,45 m dimensions electric cabinet LxWxH: 2,0 x 0,65 x 2,15 m Operation via control panel/operator stand/foot control and hand-held control unit The press can be offered with two options. 1st option: Sold as is, not connected, not complete, not functional. 2nd option: The baler will be refurbished, all parts will be exchanged, replaced and puddled. The press will be set up again. Nwsdpfx Agju N A U Is Nsk For inquiries about this press, please select your offer option! in progress. *

Condition: used, Single-column eccentric press HELMERDING Type EH 25 B Machine No. 5917 Year of manufacture: 1993 Nodeyath Tjpfx Ag Nowk Pressing force: 25 tons Throat depth: 180 mm Table area: 560 x 360 mm Ram area: 315 x 150 mm Table through-hole: 150 x 100 mm Stroke adjustment: 8 - 82 mm Ram adjustment travel: 60 mm Installation height max.: 330 mm Clamping pin bore: Ø 40 mm Strokes per minute: 145 Table height adjustment: 150 mm Table height above floor: 630 - 780 mm Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Hydraulic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand control - Automatic central lubrication by BEKA lubrication system - Electrical cabinet with 2-channel contactor control - Press table height-adjustable via 2 threaded spindles - UVV [accident prevention regulations] according to VBG 7n 5.1 for manual loading operations - Electrical diagram Space requirements (L x W x H): 1600 x 1100 x 1900 mm Weight: 2 tons Good condition

Condition: new, Year of construction: 2024, pressure 50 t throat 230 mm stroke 12-110 mm no. of strokes 40-100 Hub/min ram - range of adjustment 70 mm table surface area 740x440 mm table height 840 mm hole in the table Ø 140 mm ram surface 460x300 mm tool hole in ram Ø 45 mm total power requirement 4 kW weight of the machine ca. 3,4 t Njdpjvfhqpjfx Ag Nowk dimensions of the machine ca. BxTxH 1500x2500x2510 mm

Condition: new, Year of construction: 2024, pressure 20 t throat 155 mm stroke 6-60 mm no. of strokes 84-210 Hub/min ram - range of adjustment 50 mm 300 mm table surface area 300x450 mm table height 840 mm hole in the table Ø 90 mm ram surface 190x278 mm tool hole in ram Ø 25 mm Nodpfxevfhp Ss Ag Newk total power requirement 1,5 kW weight of the machine ca. 1,0 t dimensions of the machine ca. BxTxH 1100x1100x1900 mm

Condition: used, Single-Column - Eccentric Press AMBOLD Type PEEV 25.2 Machine No. 11734 / Year of manufacture: 20 Press force: 25 tons Throat depth: 200 mm Table size: 520 x 400 mm Ram area: 155 x 155 mm Through hole in table: 185 x 155 mm Stroke adjustment: 4–80 mm Ram adjustment distance: 40 mm Max. installation height: 270 mm (maximum stroke at BDC, table at lowest position) Clamping shank bore: Ø 32 mm Table height adjustment: approx. 150 mm Ram strokes: 160 strokes/min Motor power: 2.2 kW Nwodpfx Ajtx E N Teg Njk Power supply: 400 Volt, 50 Hz - Pneumatic clutch-brake combination ORTLINGHAUS - Press safety valve HERION - Press control PILZ - Electric foot switch and two-hand control - Height-adjustable press table via 2 threaded spindles - Automatic central lubrication VOGEL - UVV according to VBG 7n 5.1 for manual loading - Free-standing control cabinet L x W x H = 600 x 310 x 1500 mm Required space L x W x H: 1450 x 1000 x 1850 mm Weight: 1.9 tons Very good condition

Condition: excellent (used), pressure 125 t throat 400 mm stroke 6 - 125 mm ram adjustment 100 mm daylight (stroke down, ram adjustment above) 400 mm table surface area 1100 x 750 mm no. of strokes 60 Hub/min total power requirement 16 kW weight of the machine ca. 10 t dimensions of the machine ca. BxTxH 1,1 x 1,9 x 3,53 m - Machine is partially overhauled - was completely disassembled and technically checked, - new seals - new pneumatic clutch - new seals in the compensating cylinders - new drive motor - new ball spindle - new coloring Nedpfst Eix Rsx Ag Newk - current UVV test and braking time measurement Machine safe for hand inlay work For an additional charge, we can equip the machine as follows: - Work area protection with BWS / cycle operation, but only in conjunction with a new control cabinet (separate) with ABB safety control and touch panel - 2-hand operation on separate stand

Condition: used, pressure 63 t Nwsdotqm Dqepfx Ag Nsk throat 315 mm stroke 16 - 125 mm max. distance table - ram 417 mm ram adjustment 70 mm no. of strokes 80 Hub/min table surface area 800 x 630 mm ram surface 500 x 400 mm total power requirement 6 kW weight of the machine ca. 5 t dimensions of the machine ca. 1,5 x 2,2 x 2,75 m

Condition: used, pressure 130 t throat 450 mm stroke 20 - 200 mm max. distance table - ram at biggest stroke 500 mm Nedezupkfepfx Ag Nswk no. of strokes 80 Hub/min ram adjustment 110 mm table surface area 1400 x 880 mm ram surface 900 x 450 mm total power requirement 11 + 2,2 (Hydraulik) kW weight of the machine ca. 14 t dimensions of the machine ca. BxTxH 1,55 x 2,68 x 3,46 m Features: - hydraulic clutch - hydraulic overload protection - hydraulic ram adjustment - cam-operated shift mechanism - enlarged table The machine is being partially overhauled at our facility as follows: - complete disassembly and inspection - new paint job - new main drive - new separate control cabinet with touch panel, including machine wiring - Left/right work area enclosure with safety light curtain and cycle operation - New two-hand control panel on a separate stand

Condition: excellent (used), pressure 50 t throat 245 mm stroke 14 / 90 mm ram adjustment 75 mm table height adjustment 150 mm strokes per minute 42/85 table surface area 700 x 490 mm ram surface 400 x 230 mm tool hole in ram 40 mm hole in the table 240 x 140 mm daylight, max. stroke above - ram adjustment above 360 mm Nwsdpfxjtrhf Ao Ag Njk total power requirement 4 kW weight of the machine ca. 3,41 t dimensions of the machine ca. 0,8 x 1,75 x 2,1 m Machine was partially overhauled in our house as follows: - disassembly, cleaning and inspection - table milled over - new paintwork of the machine - shaft crack test carried out - disassemble Ortlinghaus clutch and additional brake, clean, check, replaceseals - additional air storage tanks - new control cabinet with safety control and touchscreen display - new wiring of the machine - new Vogel central lubrication system with piping - new Herion press safety valve + maintenance unit - new Balluff cam swith - new 2-hand control panel - new footswitch - Current UVV test with braking time measurement - Machine safe for hand inlay work

Year of construction: 1989, condition: ready for operation (used), Four Neff single-column presses are available. 1) Neff T 6.3, year of manufacture: 1989, output: 3kW. 2) Neff single-column press, operating hours: 9097h. 3) Neff EP 10 single-column press, year of manufacture: approx. 1950. 4) Neff single-column press. On-site inspection is possible. Nwedpfsvyirkjx Ag Nek

Condition: good (used), Year of construction: 1988, machine/vehicle number: 053-019/35, Offer 24591 Technical specifications: - Maximum press force 25 t - Maximum ram stroke 500 mm - Stroke speed 0 - 40 mm/s - Return stroke 0 - 200 m/min - Installation height 800 mm - Throat to ram center 360 mm - Ram clamping area 440 x 360 mm - Ram clamping pin 40 mm - Table size 630 x 500 mm - Table height above floor 710 mm - Deep drawing force 10 t - Maximum deep drawing depth 160 mm - Drive 400 V / 4 kW - Space requirement approx. W 800 x H 2720 x D 1150 mm Nwsdpfx Aowd Nybog Nok - Weight approx. 2500 kg

Condition: used, Year of construction: 1991, pressure / t plate thickness / mm no. of strokes / Hub/min Nwodewgi S Nopfx Ag Nok Condition: used The punching machine works perfectly. A functional video is available.

Condition: new, Year of construction: 2024, pressure 20 t Nsdpfx Ajvfhqijg Nowk throat 155 mm stroke 6-60 mm no. of strokes 84-210 Hub/min ram - range of adjustment 50 mm 300 mm table surface area 300x450 mm table height 840 mm hole in the table Ø 90 mm ram surface 190x278 mm tool hole in ram Ø 25 mm total power requirement 1,5 kW weight of the machine ca. 1,0 t dimensions of the machine ca. BxTxH 1100x1100x1900 mm

Condition: new, Year of construction: 2024, pressure 30 t Nodpfxjvfhqve Ag Nowk throat 180 mm stroke 8-76 mm no. of strokes 80-200 Hub/min ram - range of adjustment 60 mm table surface area 360x580 mm table height 840 mm hole in the table Ø 110 mm ram surface 250x350 mm tool hole in ram Ø 40 mm total power requirement 3 kW weight of the machine ca. 1,8 t dimensions of the machine ca. BxTxH 1350x1200x2100 mm

Condition: new, Year of construction: 2024, pressure 20 t throat 155 mm Nwodpovfhp Eofx Ag Njk stroke 6-60 mm no. of strokes 84-210 Hub/min ram - range of adjustment 50 mm 300 mm table surface area 300x450 mm table height 840 mm hole in the table Ø 90 mm ram surface 190x278 mm tool hole in ram Ø 25 mm total power requirement 1,5 kW weight of the machine ca. 1,0 t dimensions of the machine ca. BxTxH 1100x1100x1900 mm

Condition: new, Year of construction: 2024, pressure 30 t throat 180 mm stroke 8-76 mm no. of strokes 80-200 Hub/min ram - range of adjustment 60 mm table surface area 360x580 mm table height 840 mm hole in the table Ø 110 mm Nwsdpjvfhq Aefx Ag Njk ram surface 250x350 mm tool hole in ram Ø 40 mm total power requirement 3 kW weight of the machine ca. 1,8 t dimensions of the machine ca. BxTxH 1350x1200x2100 mm

Condition: new, Year of construction: 2024, pressure 30 t throat 180 mm stroke 8-76 mm no. of strokes 80-200 Hub/min ram - range of adjustment 60 mm table surface area 360x580 mm table height 840 mm hole in the table Ø 110 mm ram surface 250x350 mm Nwedjvfhpxspfx Ag Nok tool hole in ram Ø 40 mm total power requirement 3 kW weight of the machine ca. 1,8 t dimensions of the machine ca. BxTxH 1350x1200x2100 mm

Condition: used, Year of construction: 1996, pressure 80 t throat 320 mm stroke 6 - 118 mm no. of strokes 30 - 80 Hub/min ram adjustment 70 mm table surface area 830 x 610 mm ram surface 650 x 400 mm column daylight (nach hinten) 630 mm total power requirement kW Nsdpfotycdkjx Ag Nswk weight of the machine ca. 8,1 t dimensions of the machine ca. B 1,2 x T 1,9 x H 3,3 m Furnishing: - with gear transmission - fixed table - automatic stroke adjustment - automatic ram adjustment - hydr. Overload - Ejector - Grease central lubrication - Cover plate for drainage hole - Continuous speed control using a frequency converter - Machine is technically checked in our company and receives a new control cabinet with safety controls and touchscreen - current UVV test with braking time measurement

Condition: new, Year of construction: 1984, pressure 80 t throat 280 mm stroke 10-100 mm no. of strokes 52/80 Hub/min ram - range of adjustment 60 mm table surface area 850x550mm mm ram surface 420x220 mm hole in the table 300x200 mm table height 780 mm tool hole in ram Ø 45 mm Nwodpfx Agewa Umlj Nek weight of the machine ca. 4,5 t dimensions of the machine ca. 2000x2000x2700mm m

Year of construction: 2002, condition: used, pressure 63 t throat 315 mm stroke 8-100 mm no. of strokes 140 Hub/min ram - range of adjustment 63 mm table surface area 1200x630 mm ram surface 800x315 mm hole in the table Ø 110 mm Nwjdslp U D Topfx Ag Nok table height 820 mm tool hole in ram Ø 50 mm dayligth 335 mm total power requirement 7,5 kW weight of the machine ca. 5 t

Year of construction: 1977, condition: ready for operation (used), A hydraulic universal press is offered. Press force: 75t, stroke: 250mm, table surface X/Y: approx. 600mm/500mm, safety distance: 107mm, overrun distance: 18mm. Equipment: manually adjustable stroke limitation (top/bottom), integrated ejector with draw cushion control, analog pressure gauge up to 400bar. Safety device: SICK safety light curtain for the working area. Total weight: approx. 3500kg, overall dimensions X/Y/Z: approx. 1300mm/1800mm/2900mm. Inspection possible by arrangement. Nwjdpoy S A Nfjfx Ag Njk

Condition: used, Year of construction: 1977, pressure 160 t throat 340 mm Nwjdpfx Agezwg Ume Nok stroke 20-120 mm no. of strokes max. 45 Hub/min table plate 1000 x 720 mm ram surface 750 x 380 mm daylight 330 mm weight of the machine ca. 8,7 t dimensions of the machine ca. 1270x2310x2595 m

Condition: new, pressure 10 t throat 160 mm stroke 0 - 40 mm table: 270 x 370 mm table: 100 mm - Bohrung no. of strokes 200 Hub/min Njdpfjxaad Hjx Ag Newk bore 25,0 mm - Werkzeug compressed air max. 6,0 bar dayligth 180 mm total power requirement 0,75 kW weight 590 kg range L-W-H 1.168 x 1.010 x 1.670 mm

Condition: new, pressure 20 t throat 200 mm stroke 0 - 50 mm table: 360 x 550 mm table: 140 mm - Bohrung no. of strokes 160 Hub/min bore 35,0 mm - Werkzeug compressed air max. 6,0 bar dayligth 240 mm total power requirement 2,2 kW weight 1.250 kg Nwedpfjxabrrjx Ag Nek range L-W-H 1310 x 1250 x 1860 mm