Used Reischl Brine Injector for sale (234)

Condition: like new (used), Pokomat P16/320 Injector Stainless, 16 needle injector, capacity 800Kgs/h, with two sets of needles, belt dimensions 1300mm x 300mm, 3Ph Iiodpfx Aolt T Udjhysh

Year of construction: 2026, condition: new, functionality: fully functional, usable tank capacity: 5 l, machine/vehicle number: GDI-ECO, Equipment: CE marking, TECHNOMAKS GDI-6000 The TECHNOMAKS GDI-6000 is a high-pressure injector test and cleaning device developed for performing testing, analysis, and professional cleaning operations on injectors used in gasoline direct injection systems. Thanks to its specially designed ergonomic body, aluminum test rail, and durable test chamber, it is suitable for professional service use. The device features 6 special test tubes, each with a capacity of 150 mg, that are resistant to different temperature conditions and have a flexible structure. With the GDI-6000, 1 to 6 injectors can be tested simultaneously. Thanks to its practical connection accessories, injectors can be quickly connected to the system. The special drip and spray observation chamber allows for detailed control of the injector's spray pattern, direction, and leakage. Each test operation can be completed within a maximum of 90 seconds. The device's specially developed electronic pressure measurement system can reach a maximum working pressure of 200 bar. Thanks to tests performed under high pressure, dripping and leakage problems in injectors can be observed more clearly. The integrated printer allows test results to be printed and presented to the customer or relevant organization. 6000+ INJECTOR DATABASE The GDI-6000 has a large database containing reference test values for more than 6000 injectors. The fuel quantity values that the injector should deliver can be viewed on the 7-inch touchscreen. NEW-ENJ+ MODE For injectors not found in the database, the user can create their own test parameters and save new injector information to the system. OHM TEST MODE Allows for the control of the electrical resistance values of the injectors. Thus, the OHM values of the injector coils can be measured during the test. AUTOMATIC TEST MODES AUTO-1: 4000 RPM low-speed test AUTO-2: 5000 RPM medium-speed test AUTO-3: 7000 RPM high-speed test By simulating different engine speeds, it enables the comparison of the fuel quantity and spray performance of injectors under various operating conditions. DRIP / LEAKAGE TEST Ijdpfez D S Ezsx Ahyoih Thanks to the Leaking Out mode, injectors are checked under high pressure. Leakage, dripping, and pressure loss problems in the injector nozzle can be observed. MANUAL TEST MODE RPM, PULSE, and TIMER values can be adjusted manually by the user. Thus, special test scenarios can be created using the desired speed, triggering time, and test time. PROFESSIONAL CLEANING MODES CLEANING 1: Performs pressurized cleaning by operating the injectors at different speeds between 1000–7000 RPM. CLEANING 2: Increases the open time of the injectors, allowing for more intense pressurized cleaning to be applied to the fuel passage channels and injector nozzles. REVERSE FLUSHING: Using special reverse connection accessories, liquid is applied to the injector in the opposite direction. This method ensures that the injector shaft, nozzle, and internal fuel channels are professionally cleaned. ULTRASONIC CLEANING MODE: During the ultrasonic cleaning process, the injectors can be operated in a controlled manner in the 1000–7000 RPM range. In this way, the mechanical operation and ultrasonic cleaning can be performed simultaneously.

Year of construction: 2006, condition: excellent (used), functionality: fully functional, HOSOKAWA ALPINE 100 AS AEROPLEX SPIRAL JET MILL WITH K-TRON GRAVIMETRIC FEEDING SYSTEM For sale: complete Hosokawa Alpine Aeroplex 100 AS spiral jet mill system with K-Tron gravimetric dosing/feeding unit. The system originates from pharmaceutical use and was originally supplied to Mepha AG, Switzerland. The machine is in very good, clean condition and is supplied with extensive original documentation for both the Hosokawa Alpine jet mill and the K-Tron feeding system. HOSOKAWA ALPINE 100 AS Manufacturer: Hosokawa Alpine AG, Germany Type: Aeroplex 100 AS Machine No.: P2 150 959/1 Year of manufacture: 2006 Grinding chamber diameter: 100 mm Weight of jet mill: approx. 12 kg CONFIGURATION OF THE JET MILL Nozzle ring: - Nozzle angle: 50° - Number of nozzles: 4 - Nozzle diameter: 1.5 mm Injector: - Injector drive nozzle: Ø 1.5 mm - Catch nozzle: Ø 3.5 mm Compressed-air connections: - Grinding air: 10 bar(g) - Injector air: 10 bar(g) - Permissible operating pressure: +/- 50 mbar Connections: - Product feed: 2" - Grinding air: 1/2" - Injector air: 1/2" - Fine product outlet: 1 1/2" According to the original order-specific documentation, the machine is equipped with white, FDA-approved silicone seals. K-TRON GRAVIMETRIC FEEDING/DOSING SYSTEM The Alpine mill is combined with a K-Tron dosing system for controlled and reproducible product feeding. The system includes: - K-Tron gravimetric feeder - K-Tron KCM control unit - K-Tron Digi-Drive - Stainless steel product hopper - Weighing/measuring system - Dosing drive - Several interchangeable dosing screws for different feeding ranges - Stainless steel product feed components The K-Tron weighing system is identified as: Type: SFS 24/20 (+20KG VL) w.D. Capacity: 240 N Article No.: Serial No.: 10711664 Country of origin: Switzerland APPLICATION The Hosokawa Alpine Aeroplex 100 AS is a spiral jet mill designed for fine grinding and micronization. The grinding process takes place using compressed air, without rotating grinding tools inside the grinding chamber. Typical applications include: - Pharmaceutical powders and active ingredients - Fine chemicals - Laboratory and pilot-scale production - Micronization - Fine grinding of dry powders - Development and small production batches DOCUMENTATION Extensive original documentation is included. Available documentation includes, among others: - Original Hosokawa Alpine 100 AS operating manual - Order-specific machine data - Technical drawings - Operating and maintenance instructions Iisdpjzxt Snjfx Ahysh - Cleaning instructions - Spare parts information - K-Tron feeder operating documentation - K-Tron technical drawings and configuration data CONDITION Very good and clean used condition from pharmaceutical use. The system was dismantled for cleaning and has been carefully reassembled. The photographs show the actual machine and its current configuration. Inspection and demonstration by appointment in 4226 Breitenbach, Switzerland. Worldwide delivery can be arranged. Subject to prior sale and errors.

Condition: used, mileage: 1,055,628 km, power: 210 kW (285.52 HP), first registration: 11/2006, fuel type: diesel, number of seats: 36, gearing type: automatic, next inspection (TÜV): 02/2027, emission class: euro4, color: white, brakes: retarder, Equipment: ABS, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to final sale, errors, typos, and prior sale: Mercedes Benz Citaro (emergency seat) (Vehicle 187) Registration date: 14.09.2006 1,055,628 km Engine: 6,374 ccm 210 kW / 286 hp Euro 4 MOT valid until 11/2026, technical inspection valid until 02/2027 Permissible gross vehicle weight 19,000 kg, unladen weight 10,990 kg, payload 9,010 kg Overall length 12,000 mm x overall width 2,550 mm x overall height 3,100 mm Tires 275/70R22.5, 30% tread remaining all around Double doors at the front and rear Driver's cab with door Ramp Fully automatic transmission Microphone Manually operated windows 2 x electric and heated mirrors Auxiliary heater + 2nd heater Retarder Stop brake LAWO control system via cash register Emergency stop 12-volt socket Tie rods corroded 30.05.2024: Water pump + thermostats new, idler pulley next to water pump new, front axle left and right upper control arms new, front axle right shock absorber new, front axle right + left sealing cap of axle carrier new. 20.06.2024: Rear axle left, front air spring new. 08.10.2024: Seals for protective sleeves new, 6 x fuel injectors new, valves adjusted. 28.01.2025: Front axle left, axle carrier repaired, front axle right upper sealing cap of axle carrier new. 30.02.2025: Water box new. 30.05.2024: Rear axle right brake caliper new. 24.01.2025: All brake calipers overhauled. 28.04.2024: Air pressure regulator new. 30.01.2025: Complete air supply for AdBlue new. 14.04.2026: All thermostats new. Various signs of wear and tear, consistent with the age. Last inspection on 30.01.2025 at 999,732 km, next inspection at 1,059,732 km. Iiedpfxez H Eclj Ahyjh Price: 3,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties is the district court of Ludwigslust for disputes up to €10,000, and the regional court of Schwerin for disputes exceeding this amount. Errors, typos, and prior sale are subject to change.

Condition: used, Injector Inject Star Type: PI 36 Number of needles: 36 Needle diameter: 4 mm Iodpjkqyhnefx Ahyoih Passage mechanism type: Gear rack rail Electric power: 3kW Machine dimension in cm: 50x160x200cm

Condition: used, Year of construction: 2011, _____Gmeiner Airport Winter Maintenance Spreader, Icebear 2D. Capacity: 5000 liters of salt, 3000 liters of brine. Spreading width: 24 meters. Mounting engine. Mounted on a hooklift system. Location: 54595 Prüm. Iedpfx Ahjzdmtcoyjih

Condition: excellent (used), mileage: 77,200 km, power: 180 kW (244.73 HP), first registration: 05/1989, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 6x4, wheelbase: 3,200 mm, fuel: diesel, fuel tank capacity: 400 l, color: yellow, driver cabin: day cab, gearing type: mechanical, number of gears: 8, emission class: euro1, suspension: steel, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 13,000 kg, permissible axle load (axle 3): 13,000 kg, Year of construction: 1989, Equipment: differential lock, = Additional Options and Accessories = - 8-speed manual gearbox - 400-liter diesel tank - Heated mirrors - Full leaf suspension - Differential lock - Differential lock Isdpfox N Sw Tsx Ahysih - Speed limiter - Battery master switch - Hydraulic system - Hub reduction axles - Radio/CD player - Power Take-Off (PTO) - Power Take-Off (PTO) = Remarks = HEAVY DUTY M.A.N. 26.240DFT DAYCAB 6x4 FULL STEEL SUSPENSION TRACTOR UNIT, REDUCTION AXLES & ZF MANUAL GEARBOX!! 240HP, EURO 1, 6-CYLINDER ENGINE (NO ELECTRONICS, MECHANICAL FUEL PUMP & INJECTORS)!! ZF MANUAL GEARBOX!! FULL STEEL SUSPENSION!! REDUCTION AXLES!! P.T.O.!! HYDRAULIC KIT!! ETC.!! TRUCK IS IN GOOD DRIVING CONDITION, READY FOR HEAVY TRANSPORT JOBS!! MORE M.A.N. 4x2 / 6x2 / 6x4 / 8x4 (CONSTRUCTION) TRUCKS AVAILABLE FROM STOCK FOR SALE!! (>75 TRUCKS/TRAILERS IN STOCK)!! PLEASE CHECK OUR WEBSITE; SHIPPING, STACKING, TRANSPORT OR LOADING? NO PROBLEM FOR US, WE ARE A "ONE STOP SHOP" COMPANY!! YOU CAN ALSO WATCH OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! () ENGEL TRUCKS: "YOUR GLOBAL TRADING PARTNER" = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 11,967 cc Transmission Gearbox: ZF 8-speed manual gearbox Axle configuration Brakes: Drum brakes Suspension: Leaf suspension Front axle: Tire dimension: 315/80R22.5; Max. axle load: 7,500 kg; Steered; Left tire tread: 20%; Right tire tread: 20% Rear axle 1: Tire dimension: 11R20; Twin tires; Differential lock; Max. axle load: 13,000 kg; Left inner tread: 20%; Left outer tread: 20%; Right inner tread: 20%; Right outer tread: 20%; Hub reduction: Outer planetary axles Rear axle 2: Tire dimension: 11R20; Twin tires; Differential lock; Max. axle load: 13,000 kg; Left inner tread: 20%; Left outer tread: 20%; Right inner tread: 20%; Right outer tread: 20%; Hub reduction: Outer planetary axles Weights Curb weight: 9,000 kg Payload: 17,000 kg Gross vehicle weight: 26,000 kg Operational Cargo area capacity: 400 l Superstructure brand: ZF Loading platform height: 130 cm Condition Technical condition: very good Visual condition: good Further information Please contact Sales Department or Erik Engel for more information.

Condition: used, Year of construction: 2011, Double auger spreader Drive via vehicle hydraulics Capacity: 1.8 m³ Brine: 840 l Adjustable spreading width CONTROL PANEL FUNCTION NOT TESTED Sale in current condition and only to other businesses! Our business hours: Mon-Thu: 07:00 am - 03:30 pm Fri: 07:00 am - 03:00 pm Offer subject to our general terms and conditions! Sale only to commercial customers! Used vehicles / used equipment sold without warranty of defects as per our terms and conditions! Ijdpfxsx Svryo Ahyjih If you have further questions, I am happy to assist you. For viewings and/or test drives, please schedule an appointment in advance! Vehicles/equipment are not always on site.

Condition: used, mileage: 48,494 km, power: 90 kW (122.37 HP), first registration: 04/2013, fuel type: diesel, empty load weight: 3,000 kg, maximum load weight: 2,400 kg, overall weight: 5,400 kg, axle configuration: 4x4, wheelbase: 2,400 mm, brakes: other, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 2, loading space length: 2,100 mm, loading space width: 1,500 mm, loading space height: 400 mm, Year of construction: 2013, operating hours: 3,945 h, Equipment: ABS, additional headlights, all wheel drive, cabin, differential lock, immobilizer system, power assisted steering, soot filter, trailer coupling, * German vehicle * First owner * Condition: see photos * Only 3,945 operating hours * Three-sided tipper body with winter service equipment, including salt spreader and snowplow * Wet salt spreader, Schmidt Type STRATOS B11-15 * Robust belt spreader * Wet salt system (FS 30) with side brine tanks Iedpfx Ahezz R Irsysih * Container volume: 1.2 m³ * Spreading width: 1 to 8 m (gravel) or 1 to 6 m (salt) * Snowplow, Schmidt, Type FLL 18 * Clearing width: 2,090 mm at 30° * 4x4, all-wheel drive * Tipper dimensions: Length 2,100 mm x Width 1,500 mm x Height 400 mm * Original 48,494 km * Municipal plate * Front hydraulics + electrical system * Trailer hitch * 6-speed manual transmission * 2x trailer load: 3,500 kg * Trailer hydraulics * Cab with 2 suspension seats * Electrically heated mirrors * Radio CD * Work lights * Rotating beacon * Various attachments available at an extra cost, such as: front boom with mulcher FIEDLER FFA 400M-K - hedge trimmer Fiedler FH1500 - counterweight Fiedler - front-mounted sweeper Schmidt LKS-H * Differential lock * Leaf spring suspension * Raised main headlights * Raised front panel * Front lift * Wheelbase: 2,400 mm * Steel floor * Gross vehicle weight (GVW): 5,400 kg * Unladen weight: 3,000 kg * Payload: 2,400 kg * If sold to businesses and for export (non-EU and EU), the German commercial law applies. If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without a new DGUV, without a new SP, without a new UVV. You can find more trucks on our homepage at: We speak the following languages: German, English, Polish, Turkish. Note: We strongly recommend and offer the possibility of inspecting and examining the goods so that no false impressions arise in the buyer regarding the condition and suitability. Inspection and examinations are possible at any time by appointment and are expressly desired. All information is without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Changes, prior sale and errors excepted.

Condition: used, Year of construction: 2015, Overview Traditional-method finishing line for cava, champagne and other sparkling wines, from riddling and neck freezing through disgorging, dosing, corking and wire hooding to capsuling, labelling and case sealing. The machines are rated between 1,800 and 2,500 bottles/h. Two stainless steel tanks complete the offer. The line is sold as a whole; the gyropalettes and the two tanks are also available separately. Technical data - Product: sparkling wine, traditional method (cava, champagne) - Capacity: 1,800 to 2,500 bottles/h depending on the machine - Bottle formats: Bordeaux and Burgundy/cava - Years of manufacture: 1987 to 2018 - Electrical supply: 380-400 V, 50 Hz Scope of Delivery - Gyropalettes | ADRESSES INDUSTRIE | 504 S | for 504-bottle metal cages or 500-bottle packs, approx. 6,000 bottles per batch, control cabinet | 1998 - Balancer manipulator | DALMEC | PARTNER PMC | pneumatic, max. load 80 kg, bottle gripper head, unloads the cages into the neck freezer | 2005 - Neck freezer | TALLERES URPINAS | G+20 B | glycol/brine bath at -25 °C, touch panel, 2.28 kW, 380 V, 2,000 bottles/h | 2005 - Disgorging and dosing monobloc | PERRIER | crown cap removal, ice plug ejection, expedition liqueur dosing and levelling, approx. 50,000 bottles since the last general overhaul, original manual, 2,500 bottles/h | 1987 - Corker | AROL | GEMINI F | natural cork (mushroom) corking, single head | 2015 - Wire hooder | Robino & Galandrino | VITTORIA T 1/1 JUNIOR | monobloc with the corker, wire hood plaque feeder, inclined long-duration wire hood magazine, touch panel, 400 V, 50 Hz, original manual, 2,000 bottles/h; cork feeding and sorting hopper available as an option | 2015 - Bottle turner / homogeniser | FORNS | continuous, mixes the expedition liqueur into the wine, 2,500 bottles/h | 1987 - Washing, drying and blowing tunnel | CAMES | WDT-1 | exterior washing, high-speed Sonic air knives, 400 V, 50 Hz, 700 kg | 2018 - Capsule applicator | C.M.A.R. | capsule distributor with pleating and smoothing heads | 2001 - Labelling machine | PRIMA INDUSTRIES | PLM 1500 | self-adhesive, 3 label stations plus neck collar, capsule orientation with spot and UV sensors, SICK photocells, star wheels for 75 mm (Bordeaux) and 89 mm (Burgundy/cava) bottles, 3 kW, 400 V, 1,800 bottles/h | 2018 - Case sealer | SIAT | SK2-S | top and bottom adhesive tape sealing, 380 V, 3-phase | 2015 - Tank with agitator | DECALSA INDUSTRIAL | 12,200 L, agitator, heating and cooling coils, control box | 1988 - Tank | MAGUSA | DPG | 10,000 L, AISI 304 | 2000 Condition Used, still installed and in production. Regularly maintained; most machines have had one owner since new. Availability Isdpfoz E U D Nex Ahyjih Available now. Inspection possible. Location: Spain.

Condition: used, mileage: 47,650 km, power: 90 kW (122.37 HP), first registration: 07/2014, overall weight: 5,400 kg, fuel type: diesel, color: orange, gearing type: automatic, emission class: euro5, loading space width: 1,600 mm, loading space length: 2,050 mm, loading space height: 400 mm, Year of construction: 2014, total length: 4,705 mm, total width: 1,620 mm, total height: 2,200 mm, number of seats: 2, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), soot filter, Multicar M30 FUMO-Carrier H Dumper Hydrostatic 4x4 Short wheelbase 3.0 Diesel engine 90KW/122HP Euro 5 with large municipal hydraulics in municipal orange RAL 2011---- First registration: 04.07.2014 Mileage: 47,650 km Vehicle operating hours: 4,501 hours Hydraulic operating hours: 3,747 hours----* Iveco engine 3.0 90KW/122HP EURO 5 with DPF * Permissible total weight 5,400 KG * Standard cab * Air conditioning * 3-way tipper with excavator protection * Trailer hitch, ball hitch - trailer load 3,500 kg (pintle hitch can be retrofitted) * Switchable all-wheel drive with mechanical differential lock and reduction gear * Large municipal hydraulics with all available optional extras * Second control circuit for the front hydraulics * Front axle lock (for mowing work) * Equipment console mounting kit with power supply * Rotating beacon, yellow * Heated and electrically adjustable exterior mirrors * Electric windows * Light bar + additional headlights * 2 LED work lights at the rear * Radio with CD player * Driver comfort seat ISRI * Adjustable passenger suspension seat ISRI * Front mounting plate for front-mounted equipment, quick-change device SWV 500 * Coarse winter tires (as new) Iodpfx Aezxvivehyjih Winter service equipment available at an extra charge: * New professional snow plow for municipal use, width 2.00m or 2.20m ----Immediately ready-to-drive and operational vehicle from 1st hand, very good condition - MOT/emission test as well as service inspection and oil change new upon sale! Vehicle has not been used in winter service, therefore no rust! Engine with cylinder head completely new, 4x injectors, starter, generator, air conditioning compressor new!----Your contact person for this vehicle: Daniel Seidler Tel: Mobile: also Whatsapp Email: ----Errors and changes reserved!

Condition: used, Type: PI 21 Number of needles: 21 Needle diameter: 4 mm Isdpfx Aeh Dm Spshysih Max product: width 250 mm Tact per minute: 15 to 55 tact/min. Passage mechanism type: gear rack rail Product passage height: 220 mm Brine pressure: 0,5 to 4,0 bar Electric power: 1.5 kW Machine dimension in cm: Width: 70 Lenght: 140 Height: 176 Delivery time: 30 working days after advanced payment

Condition: new, 400 L capacity all stainless steel with stirring system Iodozudr Rspfx Ahyoih conical bottom with centrifugal pump power : 2 kW dimensions (l x w x h) : ± 1.200 x 700 x 1.500 mm

Condition: used, H. KÖHLER GmbH Condensation Water Test Device / Corrosion Test Cabinet H. KÖHLER HK 300 S Condensation Water Climate Test Device according to DIN 50 017 For sale is a used condensation water test device from the manufacturer H. Köhler GmbH. The device is suitable for corrosion tests, condensation water climate tests, material testing, coating testing, paint testing, and quality assurance. Technical Data Manufacturer: H. Köhler GmbH Type: HK 300 S Device Type: Condensation Water Test Device / Corrosion Test Cabinet Test Standard: DIN 50 017 Test Chamber Volume: approx. 300 liters Temperature Range: Room temperature to approx. +55 °C Humidity Range: Saturation operation possible Test Chamber Heater: 1,000 W Power Connection: 230 V / 50 Hz Connected Load: 1,000 W Compressed Air Consumption during Ventilation: approx. 3 Nm³/h Compressed Air Connection: 4.5 - 7.0 bar Deionized Water Connection: 2.5 - 4.0 bar Dimensions without Brine Tank: Width: approx. 1,200 mm Depth: approx. 600 mm Height: approx. 1,750 mm Weight: approx. 100 kg Control System HK PC102 Control LCD Display Programmable Test Cycles Condensation Water Climate according to DIN 50 017 Manual Operation / Test Operation Heater 1 / Heater 2 Alarm Display Equipment Stainless Steel Test Chamber Large Glass Door with Seal Test Chamber Thermometer Manometer Ventilation System Compressed Air Connection Deionized Water Connection Drain Connection Stainless Steel Base with Castors Accessories as shown in the pictures Application Areas Iijdpfxozhadco Ahyoh Condensation Water Testing Corrosion Testing Coating Testing Paint Testing Material Testing Automotive Industry Quality Assurance Research and Development Condition Used Optical Condition as shown in the pictures No documentation available Scope of Delivery H. Köhler HK 300 S Condensation Water Test Device Stainless Steel Base Accessories as shown in the pictures The other items visible in the pictures, which are not explicitly described, are not included in the scope of delivery. Shipping or freight shipping is possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, mileage: 280,000 km, power: 115 kW (156.36 HP), first registration: 08/2019, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 09/2027, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,963 mm, total width: 2,010 mm, total height: 2,660 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis until the conclusion of the sale, subject to errors, typos, and prior sale: Iiedpoz R Ha Iefx Ahyeh Iveco 35S16 SV Box Van (Vehicle 11) Registration Date: 15.08.2019 280,000 km Engine: 2,287 ccm 115 kW / 160 hp Euro 6 Permissible Gross Vehicle Weight (GVW): 3,500 kg MOT valid until: 09/2027 Unladen weight: 2,397 kg Payload: 1,103 kg Overall length: 5,963 mm x Overall width: 2,010 mm x Overall height: 2,660 mm Auxiliary headlights Tires: 225/55R16, approx. 60% tread remaining on the front, approx. 30/40% on the rear Trailer hitch with ball coupling Double doors, 1/2 and 1/2, at the rear Side sliding door on the passenger side is damaged 6 pairs of lashing eyes in the cargo area Side walls lined with PVC up to a certain height Wooden floor Partition Central locking with remote control 1+2 seats 2 x electric windows, mirrors, heated mirrors Multi-function steering wheel Fully automatic transmission Air conditioning Radio/CD Rearview camera with monitor Cruise control Storage compartment above Last repairs: Service on 06.06.2025: Maintenance service, water cooler GR, new coolant hose, new exhaust turbocharger Service on 23.09.2025: Maintenance service, fuel line, A/C recharge, filter cover, turbocharger solenoid valve, stabilizer link + connecting rod rear axle, front brake calipers reconditioned and front brake pads replaced Service on 24.02.2026: Maintenance service, particle filter regenerated, all injectors new, crankshaft pulley new, valve cover new Price: €6,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the district court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors, typos, and prior sale.

Year of construction: 1999, condition: good (used), The machine has been produced in the late 1990's. Very little usage (it has been stored in a warehouse). Located in Tata, Hungary. No warranty. 1800 bar Cr pump with injector Test bench with 15 kW power, 12 measuring points, flow-through water cooling KMA flow meter system with 2 flow meters. The bench has a separate lubricating oil pump with lubricating oil supply Speed range from 0 to 4000 f/min. Iiedjtw S Awopfx Ahysh Equipment: - Bosch Cr pump control test in safety, protective cage - Bosch magnet coil injector testing, coding - optional testing of piezo injectors - option to repair and test CP2 pumps Testing and coding is performed using Bosch factory software and database. Bosch Esi subscription required The test bench is in good condition and has been operated with regular calibration. For sale due to site closure.

Condition: used, Year of construction: 2016, Overview Automated 2-vessel steam brewhouse for 20 BBL (2,347 L) batches, built in 2016 by American Beer Equipment (ABE), Lincoln, Nebraska, USA. The package covers the complete hot side: mash/lauter tun, kettle/whirlpool, hot and cold liquor tanks, plate heat exchanger, UL control cabinet with touch-panel HMI, an ATTSU steam generator and a reverse osmosis water treatment unit. Currently installed and in operation. Technical data - Manufacturer: American Beer Equipment (ABE) - Year of manufacture: 2016 - Batch size: 20 BBL (2,347 L) - Mash/lauter tun: 20 BBL (2,347 L), rake drive with 3 HP SEW gear motor - Kettle/whirlpool: 20 BBL (2,347 L) - Hot liquor tank: 30 BBL (3,520 L), steam heated - Cold liquor tank: 2,347 L - Heating: steam (brewhouse and hot liquor tank) - Material: AISI 304 stainless steel, vessels and piping - Connections: 1-1/2" Tri-Clamp sanitary - Pumps: 2 HP stainless sanitary centrifugal pumps, 30 GPM at 15 PSI - Operation: automatic valves, transfers and pumps, controlled from the HMI - Electrical supply: 380 V, 3-phase, 50 Hz, 40 A Scope of Delivery Iiedpjz Iypvofx Ahyeh - Mash/lauter tun | ABE | 20 BBL | rakes with SEW gear motor, grist hydrator, wort grant, mash pump | 2016 - Kettle/whirlpool | ABE | 20 BBL | steam heated, brew pump | 2016 - Hot liquor tank | ABE | 30 BBL | 3,520 L, steam heated, HLT pump, liquor blending assembly | 2016 - Cold liquor tank | ABE | 2,347 L | 2016 - Plate heat exchanger | ABE | 20 m² | AISI 304 plates, design temperature 150 °C, rated pressure 116 PSI (8 bar) | 2016 - Control cabinet | ABE | UL | touch-panel HMI, temperature controllers for mash, kettle and HLT, Delta frequency inverters | 2016 - Steam generator | ATTSU | RL-300/12 | natural gas burner, max. working pressure 12.3 bar, max. temperature 193 °C, 501 L total volume, 3 x 400 V, 1,130 kg empty weight | 2016 - Reverse osmosis unit | with water softener and brine tank - Hard-plumbed AISI 304 sanitary piping with automatic valves Documentation ABE brewhouse manual (specifications, plumbing and electrical diagrams, HMI screens) and ATTSU steam generator manual. Condition Used, installed and in operation. Availability From 23 September 2026. Location: Spain.

Condition: used, H. KÖHLER GmbH Kesternich corrosion test equipment / SO₂ corrosion test system H. KÖHLER HK 300 S Corrosion test equipment according to DIN 50017 / DIN EN ISO 6988 For sale is a used corrosion test system from the manufacturer H. Köhler GmbH. The equipment is suitable for carrying out reproducible Kesternich or SO₂ corrosion tests for metals, coatings, paints and components in the laboratory, development and quality assurance. Technical data Manufacturer: H. Köhler GmbH Type: HK 300 S Equipment type: Kesternich corrosion test equipment / corrosion test cabinet Test standards: DIN 50017 / DIN EN ISO 6988 (DIN 50018) Test chamber volume: approx. 300 liters Temperature range: ambient temperature to approx. +55 °C Humidity range: saturation operation possible Test chamber heating: 1,000 W Connected load: approx. 1,100 W Power connection: 230 V / 50 Hz Compressed air consumption during ventilation: approx. 3 Nm³/h Compressed air connection: 4.5 - 7.0 bar Deionized water connection: 2.5 - 4.0 bar Spray pressure: 0.7 - 1.5 bar Dimensions (without brine tank): Height: approx. 1,750 mm Width: approx. 1,200 mm Depth: approx. 600 mm Weight: approx. 100 kg Control HK PC102 microprocessor control LCD display Programmable test programs Temperature control Test sequences according to company standards and DIN 50017 Equipment Stainless steel test chamber Large glass door with seal Temperature display Test chamber thermometer Manometer Ventilation system Gas dosing device Compressed air connection Deionized water connection Exhaust air connection Operating manual Maintenance documentation EC Declaration of Conformity Application areas Corrosion testing Kesternich test SO₂ corrosion test Coating test Paint test Material test Automotive industry Quality assurance Research and development Condition Iisdpfxszg U Tio Ahyoh Used Optical condition as shown in the pictures. Scope of delivery H. Köhler HK 300 S corrosion test equipment Operating manual EC Declaration of Conformity Maintenance documentation Documentation Accessories as shown in the pictures The machines, tools and other items visible in the pictures, which are not explicitly described, are not included in the scope of delivery. Shipping or freight transport possible. Subject to change, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 33,793 h, clamping force: 4,000 kN, screw diameter: 80 mm, overall weight: 31,000 kg, product length (max.): 10,259 mm, Hydraulic injection moulding machine manufactured in 2016. This Engel Victory 3550/400 tech features a clamping force of 4000 kN and an injection unit with a screw diameter of 80 mm. It includes a fully hydraulic tiebarless clamping system and advanced automation with conveyor belts. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 3550/400 tech machine we have for sale. Contact us for further details. • Injection unit: 3550 • L/D ratio: 25 • Control unit: ENGEL CC300 (21.5" Full HD touchscreen) • Drive system: ECODRIVE SHV3-HSI, 2 pump systems, accumulator • Electrical connection: 3 x 400 V + N + PE, 50 Hz • Nominal connected load: approx. 282 kW • Clamping system: Tiebarless, fully hydraulic ENGEL clamping system • Centering: 160 mm • Ejector stroke: 250 mm • Hydraulic core pulls: 2 on moving platen, 2 on stationary platen • Vacuum/compressed air circuits: 4 on moving platen with Venturi nozzle and pressure switch • Pneumatic valve: 2/2-way valve R 1/4" on stationary platen • Pneumatic mold valve control: 4-fold FESTO, up to 16 bar • Mold heating: 32 control zones, max heating power 43 kW • Screw drive: Electromotoric, speed-controlled, max 150 rpm, rated power 47 kW, torque 3700 Nm • Nozzle radius: 15 mm • Nozzle bore: 6 mm • Nozzle contact force: approx. 150 kN • Metering stroke: 390 mm • MuCell equipment: MuCell Advanced Package; cylinder L/D 24/25; MuCell G25 screw Ø 80 mm; gas injector bore; melt pressure sensor; RS-485 interface to SCF gas plant; emergency stop connection • Mold temperature control: 3 ENGEL flomo distributors with 8 zones each (24 monitored circuits total) • Hydraulic tank capacity: Main tank approx. 690 l; suction tank approx. 290 l • Robot interface: Euromap 67 / AN-146 • Languages: Czech and German Additional equipment • Including GEKU robot Iiodpfx Asz Dgpbohyoh

Condition: used, functionality: fully functional, mileage: 91,804 km, power: 170 kW (231.14 HP), first registration: 01/2003, overall weight: 15,000 kg, color: orange, axle configuration: 4x2, empty load weight: 5,880 kg, fuel: diesel, driver cabin: day cab, gearing type: mechanical, suspension: steel-air, Year of construction: 2003, Equipment: ABS, air conditioning, differential lock, self-propelled work machine, winter service vehicle: + Mercedes-Benz + Atego 1523 (975.26) + First registration: January 29, 2003 + 91,804 km + 8-speed manual transmission + Engine OM906, 231 hp; 6374 cc + Differential lock + Tachograph + Additional headlights + Air conditioning + Amber light + Air suspension, rear axle + Municipal hydraulic system + Snowplow mounting plate + Right-hand drive + Küpper-Weisser STA95 3 m³ + brine salt spreader + 730 cm x 240 cm x 300 cm (l x w x h) + Unladen weight: 5,880 kg; permissible total weight: 15,000 kg + Municipal vehicle, first owner Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Iedsz Ei Nmspfx Ahysih Errors and typos possible, subject to prior sale!

Condition: used, Year of construction: 2013, gearing type: other, first registration: 01/2013, color: orange, mileage: 1,001 km, empty load weight: 3,090 kg, driver cabin: other, Vehicle location: Bovenden, Iisdpfjxvdxajx Ahysh Body: Exchangeable system with combined spreader 5 m³ and dry material container approx. 5 m³ Brine approx. 7,500 l With brine spraying system, wind deflector, and support legs! ACCESSORY INFORMATION PROVIDED WITHOUT GUARANTEE; subject to change, prior sale, and errors!

Condition: excellent (used), mileage: 26,783 km, power: 162 kW (220.26 HP), first registration: 04/1994, fuel type: diesel, tire size: 275/70R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 150 l, color: red, gearing type: mechanical, number of gears: 4, emission class: euro2, suspension: steel, total length: 7,500 mm, total width: 2,500 mm, total height: 3,300 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, loading space volume: 2 m³, Year of construction: 1994, Equipment: ABS, = Additional Options and Accessories = - Heated mirrors - Leaf spring suspension - Comfort driver's seat - High beam headlights - Hydraulic system - Radio/CD player - All-round lighting - Toolbox - Power take-off (PTO) = Notes = PERFECT CONDITION DAF FA65-210ATI (EURO 2) CREWCAB / KRONENBURG 4x2 FIRE TRUCK WITH MANUAL GEARBOX, STEEL SUSPENSION & ONLY 26,750 KM!! 210HP, EURO 2, 6-CYLINDER ENGINE!! (NO ELECTRONICS, MANUAL PUMP & INJECTORS) MANUAL GEARBOX!! FULL STEEL SUSPENSION!! PTO!! ETC.!! KRONENBURG CREW CAB (9 PERSONS TOTAL) HIGH-PRESSURE WATER PUMP!! HOSES!! 1,500 LITER WATER TANK ETC. TRUCK IS IN GOOD WORKING AND DRIVING CONDITION, READY FOR THE JOB!! MORE DAF 4x2 / 6x2 / 6x4 / 8x4 (CONSTRUCTION) TRUCKS IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS IN STOCK)!! SHIPMENT, STACKING, TRANSPORT OR LOADING? NO PROBLEM FOR US, WE ARE AN "ONE-STOP-SHOP" COMPANY!! YOU CAN ALSO CHECK OUT OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! (/) ENGEL TRUCKS; "YOUR GLOBAL TRADING PARTNER" = Additional Information = General Information Cab: double Registration number: BB-HD-21 Technical Information Number of cylinders: 6 Isdozl En Uspfx Ahyjih Engine displacement: 6,242 cc Transmission Transmission: ZF, 4 gears, manual gearbox Axle Configuration Brakes: Drum brakes Suspension: Leaf spring suspension Front axle: Tire size: 275/70R22.5; Max. axle load: 7500 kg; Steered; Tire tread left: 90%; Tire tread right: 90% Rear axle: Tire size: 275/70R22.5; Double tires; Max. axle load: 11500 kg; Tire tread left inner: 90%; Tire tread left outer: 90%; Tire tread right inner: 90%; Tire tread right outer: 90%; Reduction: single reduction Weights Unladen weight: 10,860 kg Payload: 8,140 kg GVW: 19,000 kg Functional Body manufacturer: ZF Condition Technical condition: very good Optical condition: very good Additional Information Please contact the Sales Department for further information.

Condition: used, Year of construction: 2004, Format: 320 ?? 550 mm Equipment: Sheet feeder: Two drum feeders with gripper system Iijdpfx Aheyxqxbeyeh Belt conveyor channel for product conveying Surface with rice paper structure to protect the product Front stop made of aluminum Side guides with sorting screws for sheet positioning Screw ejector for precise bow positioning Sheet control system: Double sheet inspection using mechanical thickness measurement Misaligned bow detection using photocell Photocell-controlled activation of the second feeder and glue injection timing Glue unit: Hot melt or cold glue application (configurable) Glue injector with digital keyboard setting Delivery: Double roller press station for optimal adhesion Inclined conveyor belt for shingled product stacking at the exit Control system: SPS control unit Touchscreen control panel Safety system with light barriers Technical data: Min. Format 100 ?? 150 mm Max. Format 320 ?? 550 mm Max. sheet thickness 5 mm Maximum mechanical speed 6,000 cycles/hour

Condition: good (used), 1 used hardness tester Manufacturer: Mitutoyo Model: Wizard 810 208 D Iiedpfoxup Uwox Ahyeh Testing methods: Rockwell Brinell

Condition: used, mileage: 74,178 km, power: 90 kW (122.37 HP), first registration: 08/2013, overall weight: 5,600 kg, fuel type: diesel, color: orange, gearing type: automatic, emission class: euro5, Year of construction: 2013, total length: 5,165 mm, total width: 1,710 mm, total height: 2,210 mm, number of seats: 2, Equipment: ABS, air conditioning, all wheel drive, soot filter, Multicar M30 FUMO-Carrier H FH1 Hydrostatic 4x4 Long Wheelbase 3.0l Diesel Engine 90kW/122hp Euro 5 with quick-change ball coupling system and large municipal hydraulics in municipal orange RAL 2011 First registration: 23.08.2013 Mileage: 74,178 km Operating hours (vehicle): 6,841 hrs Operating hours (hydraulics): 4,550 hrs Previous owner: Municipal vehicle, one owner Iisdsxyr Uqspfx Ahyjh - Iveco engine 3.0L, 90kW/122hp, EURO 5 with DPF - Permissible gross weight: 5,600 kg - Standard cab - Air conditioning - KWS ball coupling quick-change system - Pre-installed for 2x trailer coupling (ball head and towing jaw) – towing capacity 3,500 kg - Selectable all-wheel drive with mechanical differential lock and reduction gear - Large municipal hydraulic system with all available additional options - Implement control panel mounting kit with power supply - Amber beacon - Heated and electrically adjustable exterior mirrors - Additional mirrors left and right - Light carrier + additional mounted work lights - 2 rear work lights - Radio with CD player - Adjustable driver's air-suspension seat (ISRI) - Front mounting plate for attachments, quick-change system SWV 500 - Wide winter tires 285/65R16 Goodyear Winter Service Equipment: - New professional snow plough for municipal use, 2.00 m wide - Optionally with Fiedler V-snow plough FKP1710 - Spreader unit Epoke S2400 HS with brine tank and controls Ready-to-drive and fully operational vehicle from first owner, in good condition! Main inspection/emissions inspection new Your contact for this vehicle: Daniel Seidler Tel: Mobile: (incl. WhatsApp) Email: Errors and subject to change!