Used Pneumatic Clutch With Brake for sale (26,465)

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, throat depth: 450 mm, Very good condition! With gearbox: Capacity: 300 t Strokes: 35 spm Throat depth: 450 mm - Pneumatic clutch - Ram weight balance Ijdpfx Aozxmimepcoig Ram stroke: 20 - 140 mm Ram adjustment: 80 mm Motor power: 30 HP

Condition: used, Year of construction: 2016, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: -, overall weight: 1,000 kg, total length: 3,500 mm, total width: 500 mm, total height: 1,200 mm, input voltage: 400 V, type of input current: three-phase, cutting speed: 50 mm/min, The Oddy Novatek 2 Pocket Roll Plant with Pinner is used to automatically divide, round, shape, and mould raw bread dough into uniform rolls and buns at high speeds. It replaces the labor-intensive process of scaling and shaping dough by hand, making it a staple machine for small-to-medium commercial bakeries, wholesale bakers, and supermarket in-store bakeries. 1. Primary Functions: Dividing: It automatically cuts a bulk mass of dough into precise, equal weights without tearing the dough structure. Rounding: It rolls the divided dough portions into tight, consistent round dough balls (baps, dinner rolls). Pinning & Moulding: The integrated "pinner" section flattens and rolls the round dough pieces into elongated shapes (finger rolls, hot dog buns). 2. Specific Bakery Products It Creates: By changing the internal moulding drums or adjusting the pinner belts, bakeries use this machine to produce: Round items: Hamburger buns, traditional baps, dinner rolls, and slider buns. Elongated items: Hot dog rolls, finger rolls, bridge rolls, submarine rolls, and miniature baguettes/batards up to 230mm long. 3. Why Bakeries Use It (Key Benefits): Massive Labour Savings: It can produce up to 6,000 rolls per hour (100 rolls every minute), a volume that would require a large team of bakers to do manually. Cost Efficiency (Oil-Free System): Unlike traditional dividers that require expensive food-grade divider oil to keep dough from sticking, the Novatek uses a completely dry, oil-free process. This saves thousands of pounds annually in oil costs and makes cleanup much easier. Product Consistency: Every roll comes out exactly the same weight (from 10g up to 208g in 2-row mode) and the same shape, which ensures uniform baking times and presentation. Physical Dimensions & Spatial Footprint: Standard Operating Footprint: Typically occupies a width of 0.8 m to 1.2 m and a base chassis length of 1.5 m to 2.5 m. Extended Length with Integral Pinner: When configured with the long-bed outfeed pinner/moulder belt assembly, the total inline workspace length requires approximately 3.2 m to 3.8 m to clear the outfeed table. Operating Height: Roughly 1.6 m to 1.8 m to the top rim of the bulk dough feed hopper to facilitate ergonomic manual or conveyor loading. Total Net Weight: Approximately 950 kg to 1,200 kg depending on the configuration of heavy-duty plunger blocks, internal moulding drums, and chassis reinforcement. Operational & Production Capabilities. Throughput Capacity: Processes up to 50 dough pieces per minute per row. For a standard 2-pocket (2-lane) configuration, this delivers a maximum output of 6,000 pieces per hour. Hopper Capacity: Features a standard integrated bulk dough conveyor hopper that accommodates 55 kg of raw dough. Iedpfxoz Ad Dco Apceig Scaling Ranges: 2-Row Operation: Scales between 10 g and 208 g simultaneously across both lanes. 1-Row Operation: Reaches 208 g to 500 g utilising lane blanking and larger interchangeable plunger blocks. Pinner Capabilities: Accurately stretches and shapes rounded dough pieces into finger rolls, hot dog buns, or miniature batards up to a maximum length of 230 mm. Utility & Facility Requirements: Electrical Supply: Requires a standard industrial 3-phase 400V, 50Hz electrical hookup.

Condition: used, No. 720: Seldom used pneumatic rotary indexing table, 270 mm, 8 positions No. 721: Machine vice, jaw width 125 mm, clamping width 250 mm, rotatable, 360-degree scale No. 722: Bending roll, 350 mm diameter, throat 50 x 60 mm, bending groove 20 mm diameter No. 723: Mounting plate, 500 mm diameter x 30 mm, flange 230 x 30 mm, second side 120 x 25 mm, mounting holes 6 positions No. 724: Flange 350 x 55 mm, collar 230 x 5 mm, 4 x M16 PCD 275 mm, bore 40 mm, bottom side recess 200 x 15 mm No. 725: Press brake tool, 90 degrees, bending length 250 mm, tool length 550 mm No. 726: Flange 250 x 30 mm, 4 bolts PCD 130 mm, 3 holes PCD 210 mm, bore 102 mm, lower side collar 200 x 5 mm No. 727: Festo feed unit BV 100200 with control block, max. belt width 60 mm, max. feed 200 mm No. 109: Electromechanical rotary indexing table, 8 stations, table 850 x 850 x 830 mm, 2 control cabinets Prices on request All dimensions are non-binding; if you require exact measurements, please inquire. Iijdpfx Apoyvqc Iocsg

Condition: used, first registration: 01/1990, Year of construction: 1990, TSA air-suspended tank semi-trailer for diesel and heating oil with 6 compartments, 35.5 m³, equipped with TKZ meter. - 3 x air-suspended BPW axles (retrofitted!) - Disc brakes - ALCOA wheels, painted orange Iodpfewmpgtex Apceig - Tyres: 385/65 R22.5 - ABS - Unladen weight: 6,500 kg - Gross vehicle weight: 33,700 kg 6 compartments: 7,500 / 7,430 / 4,660 / 2,570 / 7,500 / 5,840 litres - 6 dome lids - 6 outlets, pneumatically operated - Flow rate: 100 to 1,000 litres per minute - Complete equipment cabinet with pump and M+F TKZ - 2 hose reels, electrically driven - Printer in storage compartment ADR / Tank inspections: new or valid! German semi-trailer! TÜV / main inspection: 10/2024; new inspection possible upon request and at extra cost! Errors and prior sale excepted!

Year of construction: 2010, condition: used, Imperia D (85 x 105 cm), year of manufacture 2010, CE 2010 Machine reinforced at connecting rods Micrometric pressure adjustment Weight: 6,000 kg Mechanical speed: 1,200 sheets/hour Machine inspected by manufacturer, safety devices optimized Iodpfxjxa Epno Apceig With hardened cutting plate Self-centering universal frame Operator arm with control panel Refurbished pneumatic brake-clutch system Delivery time: 60 days Price: on request Warranty: 3 months

Condition: used, Single-column – Eccentric press EBU, Type 75 SKU Machine No. P 4598462, Year of manufacture 1962 Pressing force 75 tons Reach 300 mm Table area 800 x 620 mm Die opening 325 x 225 mm Slide area 470 x 180 mm Tool holder bore Ø 40 mm Table height above floor 845 mm Stroke adjustment 16 - 140 mm Slide adjustment 80 mm Maximum installation height approx. 420 mm Stroke rate 60 + 105 strokes/min Motor power 4 kW Power supply 380 Volts, 50 Hz - Pneumatic clutch-brake combination EBU - Overload protection with shear plate in the slide - Tool monitoring system UNIDOR, Type APS MINI - Mechanically driven strip feed with strip straightener OSTERKAMP, Type ZPN 200/350 - Strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds through 2 V-belt stages on the gear pre-stage - Two-hand operation - Simple work area guard that can be swung open - Table height adjustment in the lowest position = threaded spindles for adjustment 50 mm below floor level - Control cabinet and operator panel for tool monitoring located beside the machine - Automatic central lubrication - 4 machine feet Space requirement L x W x H 2600 x 2300 x 2450 mm Iiododzqltepfx Apceg Weight approx. 5.5 tons Good condition

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, operating hours: 12,647 h, power: 37 kW (50.31 HP), pressing force: 400 t, stroke length: 400 mm, throat depth: 405 mm, oil tank capacity: 600 l, overall weight: 34,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic press brake Manufacturer: EHT - Trumpf, Type: TruBend 8400-50S 5050mm x 400t Year of manufacture: 2010 Only 12,647 hours and 406,154 cycles!!! Technical data Manufacturer: EHT / Trumpf Type: TruBend 8400-50S Year of manufacture: 2010 Capacity: 400 t Bending length: 5050 mm Distance between uprights: 4050 mm Overhang: 405 mm Stroke Y-axis: 400 mm Installed height: 720 mm Table width: 140 mm Motor power: 37 kW Oil volume: 600L Pneumatic connection: 6 +/- 1 bar Dimensions: approx. L 6.1 x W 2.8 x H 3.67 mm Weight: approx. 34 t Equipment • Controlled axes: X, R, Y1, Y2, Z1, Z2 • Control: Cybelec ModEva 10S, 2D – Graphic control • Upper tool clamping, Trumpf/Wila, hydraulic • Lower tool clamping, Trumpf system, hydraulic • CNC-controlled crowning • Safety light curtain, Lazersafe • 2 CNC bending aids incl. parking position • Pneumatic die shifting • LCB angle measuring system (2 x front, 2 x rear) • Foot switch Upper tools Trumpf OW203/S 60° R4 H220 130t/m, segmented, approx. 6000mm Trumpf OW203/S 60° R8 H220 130t/m, segmented, approx. 3050mm Trumpf OW300/S 86° R1 H300 80t/m, segmented, approx. 1380mm Trumpf OW210/S 28° R1 H240 40t/m, segmented, approx. 4060mm Trumpf OW200/S 86° R4 H218 80t/m, segmented, approx. 2700mm Lower tools Trumpf EV-W003, 30° R1.0 H100 70t/m, segmented, approx. 1500mm V10 Trumpf EV-W016, 50° R1.6 H150 50t/m, segmented, approx. 4100mm V16 Trumpf EV-W020, 84° R2.0 H100 70t/m, segmented, approx. 3650mm V20 Trumpf EV-W024, 80° R2.5 H100 70t/m, segmented, approx. 3050mm V24 Trumpf EV-W030, 80° R5.0 H100 80t/m, segmented, approx. 6000mm V30 Iijdpezzvfiefx Apceg Trumpf EV-W030, 30° R3.0 H100 90t/m, segmented, approx. 3050mm V30 Trumpf EV-W040, 80° R5.0 H100 120t/m, segmented, approx. 4570mm V40 Trumpf EV-W040, 30° R5.0 H100 90t/m, segmented, approx. 3050mm V40 Trumpf EV-W050, 80° R5.0 H100 150t/m, segmented, approx. 1000mm V50 Trumpf EV-W060, 80° R5.0 H100 150t/m, segmented, approx. 4560mm V60 Trumpf EV-W080, 80° R05 H100 150t/m, segmented, approx. 4550mm V80 Trumpf EV-W160, 80° R15 H150 200t/m, segmented, approx. 4000mm V160 Trumpf FWZ H100 120t/m, segmented, approx. 4500mm All information is without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 2005, machine/vehicle number: 05/460/013, functionality: fully functional, input voltage: 400 V, input current: 80 A, input frequency: 50 Hz, stroke length: 265 mm, operating speed: 200 mm/s, overall weight: 18,000 kg, Equipment: CE marking, For sale: Betzeler 3200 KN x 3100 MM machine – Hydraulic bending press Manufacturer: Beyeler GmbH, Mühlhäuser Strasse 3, D-99867 Gotha Iijdjzm S Ttepfx Apceg Machine type: PR 3200 kN x 3100 mm Serial number: 05/460/013 Year of manufacture: 2005 Machine weight: 18,000 kg Electrical data Voltage: 400 V Power: 30 kW Frequency: 50 Hz Phases: 3∼ Max. fuse rating: 80 AT Hydraulic/pneumatic data Max. air pressure: 8 bar Technical data (press brake) Force: 3200 kN Max. stroke: 265 mm Max. closing speed: 200 mm/s Pressing speed: 1–10 mm/s Max. O.A. response time: 90 ms Min. ESPE safety distance: 290 mm

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, overall weight: 16,500 kg, total width: 2,185 mm, total length: 5,563 mm, total height: 2,195 mm, Specification: Maximum sheet size: 740 x 1060 mm Minimum sheet size: 330 x 400 mm Maximum cutting force: 300 tons Mechanical speed, up to 8,000 sheets/hour Materials processed: Paper and cardboard: 0.1 - 1.5 mm Corrugated cardboard up to B-flute Equipment: - Steel feeding plate - Lifting suction cups - Transport suction cups - Adjustment of brush and roller position on the delivery table, using a single knob - Touchscreen monitor mounted on the machine - Pneumatic stops at the front guides - Laser sensors on the front guides - Modification of sensors for transparent materials - Pneumatic closing of the frame and die plate - APC System – Automatic Pressure Control System APC1 - automatic control of cutting pressure, allowing for maintaining the same pressure during the die-cutting/punching process. Possibility to set tonnage tolerance and control the sheet count after a certain number of pieces. - Programmable safety clutch for exceeding cutting force - pneumatic - Stabilizing air blast in the cutting section, increasing precision and cutting speed for thin papers - Quick-change tool system in the stripping section – Punching Metal (upper and lower stripping fingers) - Europing Centering System – die-cutting and stripping zone - Automatic non-stop stacking system, with a curtain and programmable number of sheets per stack - Upper curtain air blast in the stacking zone - Slip sheet inserter with batch counter, located in the stacking zone - Spare gripper carriage – 1 unit - Power transformer Delivery time: immediately after acceptance of the commercial terms and payment of the financial amount. Iodozt Nbzepfx Apcjig This announcement has been automatically translated. Translation errors are possible.

Condition: excellent (used), CATALOGUE NUMBER 8032 TECHNICAL DATA - max. width of the workpiece: 970mm - max. height of the workpiece: 160mm - 2 units - 1) ribbed rubber roller - 2) two metal rollers + shoe - motor power of unit I and II: 11kW - total power: 12kW - brake * from above: - metal roller, slip - pressure roller - unit - metal roller, slip - pressure roller - unit - metal roller, slip * from below: - rubber roller, slip Iiodpszxg H Sefx Apcog - conveyor belt - pneumatic belt oscillation - electric table lifting - 2 feed speed settings - feed motor approx. 0.75kW - working pressure: 8-10 bar - diameter of the extraction nozzle: 2x160mm - overall dimensions (L/W/H): 1600x1500x2000mm - weight: 1370kg ADVANTAGES - Made in Italy - 2 units - Unpainted - Used sander, very good condition Net price: 21900 PLN Net price: 5200 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary with higher fluctuations)

Condition: new, mileage: 790,468 km, first registration: 12/1979, fuel type: diesel, fuel: diesel, Year of construction: 1979, VOLVO F 89 Intercooler 4x2 Dump Truck ! VINTAGE CAR! NEW CLUTCH, 0 km • Sleeper Cab • 1 Bed / Cot • Gross Weight: 19,000 kg • Unladen Weight: 9,500 kg • Wheelbase: 4,900 mm • Power Steering • Drum Brakes • 8-Speed Manual Transmission with Overdrive • Full Leaf Suspension • Sunroof • (Almost) ORIGINAL CONDITION Iiodpfxswmpizj Apcjg • No Rust! Used in Greece! Subject to errors and prior sale!

Condition: used, mileage: 114,000 km, power: 350 kW (475.87 HP), first registration: 10/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 10/2026, color: red, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, Mercedes Benz Arocs 2648 / 6x4 / Truck-Mounted Crane / Assembly Crane / Roofer Crane!! Operating hours approx. 1500 hrs. GERMAN VEHICLE, all inspections performed by Mercedes Benz, original paint. CRANE: MKG / HMK 401 HPA 4 L / Rope winch, remote control, 26 m fully hydraulic - 900 KG, plus 2 x mechanical to 31 m - 400 KG. Axle load, front axle: 9.0 t, trailer brake: 2-line, audio-navigation system with Bluetooth comfort features, exhaust pipe downwards on the right, battery 220 Ah, air horn, electrical pre-wiring in the cab 24V / 100 A, suspension: rear leaf springs 2x13.0 t, suspension: front leaf springs 9.0 t, 4 leaves, parking brake additionally on the front axle, storage compartment on the upper rear wall, transmission: 12-speed - type: G 330-12, transmission lock for auxiliary drive, rear lights: construction site version, info display 12.7 cm with video function, fuel tank: 390 L, steel, left, air intake on the side of the cab, engine brake reinforced, auxiliary drive: MB 124-10c, parameterizable special module, spare wheel, pipe rupture protection in the brake system, reversing warning audible (external warning signal), rear cross member reinforced, drawers under the dashboard, seats in the cab: armrest for passenger seat, seats in the cab: driver's seat, comfort suspension seat, sun visor outside, sun protection roller on side windows, driver's and passenger's door, voltage converter 24V / 12V 10 A, steel rims 11.75x22.5 (on the front axle), steel rims 9.00x22.5, 12V socket additionally, 24V socket in the passenger footwell additionally, stone guard, carpet on the engine tunnel, door extension for the cab, CB radio preparation, preparation for reversing camera, straight front axle, increased ground clearance, additional thermal insulation, auxiliary heater (water), twin-disc clutch. Emission standard EURO 6, axle configuration: 6x4, trailer socket: 24V / 15-pole, Arocs, exterior mirrors electrically adjustable and heated, differential lock: rear axle, compressed air connection in the cab, compressed air tank: steel, cab: width 2.30 m, cab: mobile cab access, cab: hydraulic tilting mechanism, cab: L StreamSpace, cab variant: StreamSpace, cab: steel-sprung, comfort features, stowage compartment outside left, stowage compartment outside right, lift roof electrically, windshield tinted with band filter, preparation for comfort bunk above, wide, curtain for the sleeping cabin, seats in the cab: driver's seat backrest foldable, suspension: leaf spring / leaf spring, power windows, vehicle without rear window, generator 100 A, urea tank (AdBlue): 60 L, rear axle: bevel gear 233, interior filter: pollen filter, body / superstructure: chassis, comfort bunk below, comfort locking system, steering pump unregulated, air compressor: 2-cylinder, air dryer heated, engine: 12.8 L - 350 kW R6 diesel (OM 471), engine compartment encapsulation, ramp mirrors, waste heat recovery, disc brakes with partial protection, disc brakes on front and rear axles, seat cover / upholstery: fabric, seats in the cab: passenger multi-contour seat, stabilizer: rear axle, stabilizer: front axle, socket in the cab 24V, tachograph / EC control unit, underrun protection rear, fixed, preparation for toll collection, water pump regulated, permissible gross weight 26.0 t, oil cooler, transmission. Iedpfx Apez Dlw Recoig

Condition: excellent (used), Catalog number: 8047 TECHNICAL DATA - max. width of the workpiece: 1100mm - max. height of the workpiece: 160mm – Top: - 2 sliding metal rollers - unit: grooved rubber roller + shoe + metal roller - sliding rubber roller – Bottom: - sliding rubber roller - conveyor belt - sliding rubber roller - pneumatic belt oscillation - stepless feed speed adjustment - electric machine body lifting - pneumatic brake - total power: 10.5kW - operating pressure: 6-8 bar - diameter of the dust extraction nozzle: 190mm Iedpfx Apjzx Swpocoig - dimensions (L/W/H): 1470x1540x2000mm – weight: 1260kg ADVANTAGES - Made in Germany - Single-head grinder with a 1100mm wide shoe - Unpainted – used grinder, very good condition Net price: 19900 PLN Net price: 4740 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: used, Year of construction: 1999, functionality: fully functional, total width: 1,600 mm, total height: 2,000 mm, total length: 2,000 mm, working width: 1,100 mm, grinding width: 1,100 mm, overall weight: 1,187 kg, grinding height: 170 mm, height adjustment type: electric, type of input current: three-phase, workpiece height (max.): 170 mm, grinding belt width: 1,115 mm, extraction nozzle diameter: 160 mm, input frequency: 50 Hz, input voltage: 400 V, - Italian made - DTR (technical documentation) and CE certified TECHNICAL SPECIFICATIONS: - Maximum working width: 1100 mm - Maximum working height: 170 mm - Minimum working height: 3 mm - Minimum working length: 370 mm - Dimensions of sanding belts (width x length): 1115 x 1900 mm - Feed motor power: 0.8 kW - Two feed speeds: 4.5 and 9 m/min Isdpfx Apeytp Agoceig - Sanding height adjustment motor power: 0.25 kW - 2 units (aggregates): 1) Grooved steel calibrating roller, Ø 140 mm - Rubber pressure roller 2) Grooved rubber roller + shoe + steel roller - Rubber pressure roller - Aggregate I and II motor power: 15 kW From below: - 3 pressure rollers - Conveyor belt - 3 pressure rollers - Pneumatic belt oscillation - Air blower for the second sanding belt - Electric and manual table lifting (for precise setting) - With pneumatic brake - Sanding belt speed: 16 m/s - Operating pressure: 6 - 8 bar - Extraction port diameter: 2x160 mm, 2x110 mm Machine dimensions: - Overall dimensions (LxWxH): 2000x1600x2000 mm - Weight: 1200 kg

Condition: used, Year of construction: 2011, Working width: 20–230 mm Working height: 8–120 mm Feed system • Variable-frequency controlled feed drive: 5–30 m/min, continuously adjustable, with 7 kW (9.5 HP) brake motor. • Pneumatically controlled up/down infeed roller before the 1st bottom spindle. • Axial adjustment range of the feed rollers relative to the left spindle: 35 mm. • Extended pendulum axis opposite the left spindles to 150 mm. • Reduced roller spacing in the area of the right-hand spindles. Machine frame, tables and fences • 2 m long jointing table (including jointing fence). • Grooved guide for short or difficult-to-feed workpieces, coated with Marathon PowerCoating. Table tops are non-removable. o Minimum working width: 25 mm o Maximum stock removal at the 1st bottom spindle: 7 mm • Manual lubrication pump. • One driven, hardened outfeed table roller, 210 mm wide. • One driven, hardened machine table roller, 210 mm wide. Pressure elements and guides • Spring-loaded top pressure rollers. • Anti-kickback device before the top spindle for short workpieces. Machine operation • Memory function for storing profile setup data. • EasyCom for quick and easy setup of the moulder and planer. • Storage for up to 1,000 profile programs, including tool data. • Reduced setup times. • Convenient and safe operation. • Basic equipment prepared for CNC-controlled adjustment and positioning. • 2 CNC-controlled radial adjustment and positioning axes for tool spindles No. 4 and No. 5, in conjunction with the Memory function or EasyCom. • CNC-controlled feed height adjustment (up/down) in conjunction with the Memory function. • Mobil- tool spindle (1 axis): automatic adjustment of the left spindle to different workpiece widths. • Centralized lubrication points located at the front of the machine. • Electromagnetic locking of the safety hood. • One internal light inside the safety hood. Iodpozkklpsfx Apcoig Specifications are provided for information only. This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: good (used), Year of construction: 2004, Item No.: Lg 34522 High-performance punching machine HAULICK+ROOS ROS 500 - 1250 used, in good condition Year of manufacture 2004 (without soundproof cabin) with Iiedpfx Asip Uqmepcog - continuously adjustable drive - 2-connecting rod drive - pneumatic clutch-brake combination - stroke adjustment - Siemens PC 670 screen control - oil circulation lubrication Technical data Pressing force max. 500 KN Stroke rate 30 to 900 min.-1 Stroke 12 to 60 mm Installation height (max, stroke and upper die) 320 mm Frame width 1,250 mm Table area 1,250 x 730 mm Die opening in the table 1,160 x 140 mm Punch area 1,250 x 450 mm Punch adjustment 60 mm Drive power 26 kW Weight approx. 11,000 kg Dimensions (L x W x H) approx. 2,800 x 1,300 x 3,250 mm Equipment and accessories: Servo roll feed VAMCO SP 150 Year of manufacture 2014 Pass width max. 150 mm Material thickness max. 3.0 mm

Condition: excellent (used), pressure 125 t throat 400 mm stroke 6 - 125 mm ram adjustment 100 mm daylight (stroke down, ram adjustment above) 400 mm table surface area 1100 x 750 mm no. of strokes 60 Hub/min total power requirement 16 kW weight of the machine ca. 10 t dimensions of the machine ca. BxTxH 1,1 x 1,9 x 3,53 m Iiedpfot Eix Rjx Apcog - Machine is partially overhauled - was completely disassembled and technically checked, - new seals - new pneumatic clutch - new seals in the compensating cylinders - new drive motor - new ball spindle - new coloring - current UVV test and braking time measurement Machine safe for hand inlay work For an additional charge, we can equip the machine as follows: - Work area protection with BWS / cycle operation, but only in conjunction with a new control cabinet (separate) with ABB safety control and touch panel - 2-hand operation on separate stand

Condition: new, Clutches and brakes for Russian machine tools We offer for sale original electromagnetic and mechanical clutches, brakes and complete clutch assemblies for Russian machine tools such as: 1M63, 1M65, 1H65, 165, 1512, 1516, 1525, 1L532, RT-117, DIP-300 and many others. Our warehouse also offers spare parts such as: Iiedpov Sb Eysfx Apcjg - electromagnetic clutches and brakes, clutch plates and brush holders; - complete electromagnetic and mechanical clutches for 1M63, 16K20, clutch shafts, friction plates and discs; - parts, clutches and brakes for 6P82T, 6P83 milling machines, etc. - pneumatic clutches for KD2128, KD2328 series presses, etc., made in Russia. Most of the above-mentioned items are available from stock, for the remaining ones we offer the fastest possible delivery times.

Condition: used, functionality: fully functional, mileage: 352,900 km, first registration: 04/2026, fuel type: diesel, maximum load weight: 690 kg, overall weight: 7,490 kg, wheelbase: 4,185 mm, color: white, number of gears: 7, emission class: euro5, Year of construction: 2007, Equipment: ABS, air conditioning, spoiler, IVECO NEW EUROCARGO ML75E18 Chassis ZCFA75D0302505160 – LICENSE PLATE EK256NK First registration date: 04/20/2007 - Emissions standard: EURO 5 Engine: 4-cylinder common rail Tector - 3920 cc – 180 hp – 352,900 km 6-speed manual transmission + reverse Body: Exterior cab color: white / Interior cab color: white Tires: Size 215/75 R17.5 Iedpey Uh T Iefx Apcoig CONFIGURATION Wheelbase 4185 mm - Short cab - Front mechanical suspension and rear pneumatic suspension Total weight: 74.90 tons – Payload 690 kg TECHNICAL EQUIPMENT OF THE TRUCK: Air conditioning, Webasto, Manual transmission, Emissions standard Euro 5, ABS, Engine brake with retarder function, Immobilizer, Power steering, Clutch booster, Electronic speed limiter, Pneumatic driver's seat, Electric windows, Electrically heated rearview mirrors, Spoiler. FITTING: INSULATED VAN WITHOUT ATP - IN FIBERGLASS Internal usable dimensions approximately 6.20 * 2.20 * h 2.75 REFRIGERATION UNIT – Brand CARRIER – Model XARIOS 400 – Serial number PB100282 REAR LOADING LIFT Brand: DHOLLANDIA DHSM5 - Serial number: 147606 - Useful lifting capacity 10 tons

Condition: used, machine/vehicle number: 4038, functionality: fully functional, power: 2 kW (2.72 HP), input voltage: 380 V, input current: 9 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 80 mm, saw blade diameter: 330 mm, saw blade bore: 32 mm, actuation type: pneumatic, rotational speed (max.): 3,800 rpm, ELU Miter saw, model MGS 73 for aluminum and plastic profiles Saw blade 330 x 3.2 x 32 mm, Z = 96, negative tooth angle Cutting height approx. 80 mm, Miter setting right/left +/- 45°, 2 pneumatic clamps, horizontal, 2 pneumatic clamps, vertical, Motor 2 kW (2.7 hp), 380 volts, 50 Hz, Isdezbr Uzjpfx Apcoig pneumatic feed with hydraulic feed brake, 2-hand operation: left: clamping and releasing, right: saw feed, cast table extension on the right with stop and measuring scale 0 - 3,000 mm without emergency stop switch!, without motor brake! as inspected, ex works Seevetal, Ex Works, without transport, subject to prior sale.

Condition: as good as new (ex-display), Year of construction: 2022, Features: - E-Control 20 Dual Screen with bending sequence simulation - 6-axis back gauge with 100 mm stroke (right ±50 mm) - E-Bend S sensor for thickness control on Z1 - Wila NSCR-II HC Premium table - Wila NSCL-II HC Premium tool holder - Pair of front sheet metal supports - Bending force: 500 kN - Usable bending length: 2,040 mm - Usable stroke: 300 mm Iodpfx Ajz A Tg Dopcsig - Maximum opening: 590 mm - Rapid approach speed: 160 mm/sec - Interface for Industry 4.0 - Standard tool kit

Year of construction: 2023, operating hours: 139,959 h, condition: used, Serial number: 750 Complete installation: - BySmart 3015 Fiber 10.000 - ByTrans Modular - BySort 3015 - Tower-Linie 3015 1T Working Area & Cutting Range: Nominal sheet dimensions (X × Y): 3000 × 1500 mm. Max. cutting range (X × Y × Z): 3048 × 1524 × 100 mm. Max. weight on shuttle table: 1,100 kg (fully loaded shuttle table). Table changeover time: Approximately 27 seconds. Dynamics & Speed Drive: High-rigidity gantry system. Max. axis speed (parallel X, Y): 100 m/min. Max. simultaneous positioning speed: 140 m/min. Maximum axis acceleration: Up to 12 m/s², ensuring fast corner and hole processing. Accuracy (according to ISO 230-2) Positioning accuracy (Pa): ± 0.1 mm. Repeatability (Ps): ± 0.05 mm. Edge detection accuracy: ± 0.5 mm using the automatic optical measurement sensors on the cutting head Laser Cutting Head & Technology (2023 Standard) Cutting Head: Original Bystronic Engineered fiber cutting head with automatic focal point adjustment (Autofocus). Nozzle Handling: Automatic nozzle centering and automatic nozzle changer (depending on the selected factory options). BeamShaper (Optional): Adjusts the laser beam profiles for better cutting quality and higher speeds in thick carbon steel Laser Power: 10 kW Carbon Steel (Mild Steel): Up to 25 mm (30 mm with BeamShaper). Stainless Steel: Up to 30 mm. Aluminum: Up to 30 mm. Brass / Copper: Up to 15 mm / 12 mm. Control & SoftwareCNC control: ByVision Cutting with a 21.5-inch HD touchscreen mounted directly on the machine. Software Integration: Fully compatible with BySoft CAM (automatic nesting, cutting path optimization, and integration with the Bytrans extended automation systems). Cutting hours: 1399,59 Operating hours: 19720,58 Iiodpfx Aozyq H Sspcog Pneumatic pre-pressure: nominal 6 bar Pneumatic pressure cut-off point: 5 bar Power: 400 V/50 Hz Maximum positioning speed: X/Y axes parallel: 100 m/min Maximum positioning speed: X/Y axes simultaneous: 140 m/min Maximum axis acceleration: 8 m/s² Maximum laser power: 10 kW Power range: 1,000 to 10,00 Online auction of modern and very well maintained metalworking machines (e.g. 2023 BYSTRONIC BYSMART FIBER 3015 10kW laser incl. tower- and sheet storage modules complete, 2x 2023 BYSTRONIC XPERT PRO press brakes, 3x 2023 VALK WELDING incl. PANASONIC welding robots, Q-FIN deburring and finishing, KASTO automatic saws, SIEGMUND welding clamping tables, HAAS machine tools etc.), previously in use at Lemken, the well-known manufacturer of agricultural equipment - including plows and seeders - in Dinteloord, The Netherlands, due to the relocation of the manufacturing. The online auction opens Thursday 3 September and closes Thursday 8 October. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 6 October Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with...

Condition: excellent (used), Catalog number: 7808 TECHNICAL DATA max. width of the processed workpiece: 1100 mm max. height of the processed workpiece: 160 mm 2 units: 1) ribbed rubber roller for calibrating Ijdpoztambofx Apcjig 2) rubber roller + shoe + metal roller – from above 2 metal rollers, sliding units cleaning brush – from below conveyor belt pneumatic belt oscillation with photocells electric table lifting 2 feed speed types, 1.1 kW motor: 15 kW with pneumatic brake additional pneumatic shoe operating pressure: 6-8 bar diameter of the dust extraction nozzle: 2x160 mm, 1x120 mm overall dimensions L/W/H: 2700x2100x2200 mm weight approx.: 3000 kg – German production – 2 units – additional pneumatic shoe – unpainted – used grinder, very good condition Net price: 32,900 PLN Net price: 7,833 EUR, depending on the exchange rate of 4.2 EUR (Prices may change due to significant fluctuations)

Condition: used, Single-column eccentric press WEINGARTEN type ARP 100 Machine no. No. 122481 Year of construction 1984 Pressure capacity 100 ton. throat 400 mm Table size 920 x 660 mm ram surface 700 x 450 mm Ijdpfx Apou Rwa Iscjig Rear upright width 735 mm Stroke adjustment 20 - 160 mm Plunger adjustment 80 mm Installation height with 160 mm stroke max. 355 mm (without intermediate table top) Installation height with 20 mm stroke max. 425 mm (without intermediate table plate) Stroke rate 60 strokes/min. Table surface intermediate table top 920 x 610 mm Thickness of intermediate table top 90 mm Hole in intermediate table top Ø 210 / 180 mm Through-hole in machine table Ø 210 / 180 mm Table height above floor 800 mm (without intermediate table top) T-slot width in table and ram 22 mm Clamping pin bore 50 mm Motor power 11 kW Mains connection 400 Volt, 50 Hz - Hydraulic overload protection in ram - ORTLINGHAUS pneumatic clutch/brake combination - Electromotive ram adjustment with counter - Clamping pin bore with clamping piece - Front crankshaft support bearing - Gear reduction gears in closed oil bath gearbox - Two pneumatic tappet compensation cylinders - WOERNER automatic central grease lubrication - Lift release via electric foot switch or two-hand control panel - Electrical control cabinet permanently attached to the machine - Operating instructions and circuit diagram - UVV for manual insertion work Space requirement L x W x H 2200 x 1600 x 3250 mm Weight 8.3 tons Good condition

Condition: used, Year of construction: 2014, power capacity 3 kW feed pressure 7 bar liter capacity / l weight 286 kg Chicago Pneumatic CPVR15 CE screw compressor - Year of manufacture 2014 The CPVR15 CE impresses with its robust design, long service life and low operating costs. Whether in workshops, workshops or industrial applications - this compressor reliably supplies you with the compressed air you need. Drive power: 3 kW Delivery pressure: 7 bar Air output: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50-58 dB(A) Voltage/frequency: 415 V / 50 Hz Application: Workshops, craft businesses, industrial applications with medium compressed air requirements Included in delivery: 1x compressor - Chicago Pneumatic CPVR15 CE 1x refrigeration dryer - OMI ESD 108 - 0.70kW 1x Beko Öwamat 2 - oil-water separator Iedpfxeh A Sfdo Apcsig Technical data was taken from publicly available sources