Used Oliver Fritz Gmbh & Co. Kg Abrasive Blasting Container For Sandblasting System for sale (112,909)

Condition: new, Year of construction: 2026, Pressure blasting pot, 140L, mobile for construction site or stationary use. Fittings securely mounted under the handle. Very well suited for tough construction site applications. Includes: - 140L pressure vessel - Pre-filter - Weather protection cover Dcsdoynr E Hopfx Albol - Water separator - Pressure regulator - Adjustment for conveying air (tank air volume and blast hose) - Blasting hose Ø25mm, 10m - Venturi blasting nozzle Ø8mm (air consumption at 6 bar approx: 3.57 m³/min) - Abrasive mixing valve Y-piece, rubber-coated for reduced wear - Breathing air filter with 10m air hose - Blasting helmet Safety features: - Dead man’s switch with control cable - Controlled quick venting Optional: - Larger handle with hose holder - Wet blasting head - Breathing air heater - Transport frame with drum and lid as attachment for multi-hour blasting without refilling - etc. Made in Germany

Condition: new, Year of construction: 2025, Shot blasting booth with blasting carriage and rotary table for components with a diameter of up to D = 900 mm and a height of 400 mm. Aspiration system for abrasive media with cyclone separator. Extra sound insulation and an inner lining made of rubber with fabric insert. High-quality machine for continuous use in trade and industry. Rotary table with rotary drive, D = 800 mm, for heavy components up to 800 kg. Pneumatic lift-up door. Filtration system with pneumatic cartridge cleaning and dust filter for air discharge into the building. Dcsdpfx Aed Sl Dbelbel For questions regarding technical specifications, etc., please contact us in writing or by telephone.

Condition: new, Year of construction: 2025, functionality: fully functional, volume flow: 16,000 m³/h, power: 15 kW (20.39 HP), Mobile filtration unit 15 kW with 16,000 m³/h extraction capacity for aggressive dusts with pre-chamber separator. Assembly in approx. 10 minutes. Cartridge cleaning by compressed air pulse jet. 16 filter cartridges, 15.6 m², Bio Class M. Dust collection via big bag. The filter consists of 2 separate parts that are assembled using a forklift. Connection is made using 6 quick-release locks and 2 connector plugs. A duct or extraction hose can be connected at the rear of the filter. Dcodpfxjwxlygs Albjl

Condition: new, Year of construction: 2025, 2 high-performance impeller wheels, Ø380, 11 kW each. Our impeller wheel is characterized by its high flexibility due to its ability to rotate both clockwise and counterclockwise. Our two-disc turbine ensures a stronger, more concentrated hot spot and more efficient blasting. Replacing the 8 impeller blades and the internal lining is easy and can be done without special tools or the need to disassemble the turbine wheel. All wear parts are made of high-quality materials for a long service life. A mechanical pre-acceleration of the abrasive ensures optimal utilization of the energy used. It also forms the heart of the blasting system: the efficiency and economy of the blasting system are decisively influenced by the efficiency of the impeller wheel. The impeller wheel is directly driven and, depending on the diameter, is equipped with 4-8 blades (Ø240, 4 pieces; Ø380-500, 8 pieces). High efficiency and maximum utilization of the energy used are thus guaranteed at all times. We will be happy to advise you! Dcsdpfxjhvmkxe Albsl

Condition: good (used), Year of construction: 1999, Esta Spänesog-SB 8151 Chip Extractor High-performance industrial extraction system from the quality manufacturer ESTA, model Spänesog-SB 8151. The unit is ideally suited for workshops for the extraction of chips and dust (e.g., in metal or wood processing). Technical specifications Manufacturer: ESTA Apparatebau GmbH & Co. KG Model / Type: Spänesog-SB 8151 Voltage (Volts): 400 V Power (kW): 2.2 kW Current (Amperes): 4.6 A Frequency (Hz): 50 Hz Protection class: IP 54 (dust and splash-proof) You can find more items—both new and used—in our shop! Dcsdpfx Ajznibwslbol International shipping costs available upon request!

Condition: new, Year of construction: 2026, Mobile 100L pressure blast pot for construction sites or stationary use. Fittings securely mounted beneath the handle. Ideally suited for demanding construction site applications. Comprises: - 100L pressure vessel - Pre-sieve - Weather protection cover - Water separator - Pressure regulator - Adjustable delivery air (air volume for vessel and blasting hose) - Blasting hose Ø25mm, 10m Dodpfxjynr Ems Albecl - Venturi blasting nozzle Ø8mm (air consumption at 6 bar approx.: 3.57 m³/min) - Abrasive mixing valve Y-piece, rubber-coated for reduced wear - Breathing air filter with 10m air hose - Blasting helmet Safety equipment: - Dead man switch with control cable - Pneumatic quick venting control Optional: - Larger handle with hose holder - Wet blasting head - Breathing air heater - Transport frame with container and lid as attachment for extended blasting without refilling - and more. Manufactured in Germany

Condition: like new (used), Staff Ice System BTX150 Ice Cube Machine / Ice Maker 150 kg/24h Year 2022 Technical Specifications Gelato BTX150 A Staff Ice System ice machine for the production and storage of ice cream. Designed for manufacturing and storing ice cream. Automatic extraction. Stirrer with durable polyethylene blades. The double lid allows ingredients to be added during the process. Vertical tank for complete control of the production process. 50 customizable operating programs. Technical features: Maximum ice cream production per cycle: 2 liters. Ice cream production: 15 l/h. Dimensions: 43.5 x 59.2 x 59.5 cm. Dodpfx Aoyzc Ruslbscl

Year of construction: 2021, condition: new, The container scale from WeDi GmbH is used to determine the fill level of roll-off containers. It consists of 2 drive-on ramps, each measuring 1000 mm x 400 mm x 160 mm, made of 10 mm thick steel plates, including end stops with reinforcing plates and struts, as well as a lateral centering rail and mounting holes. 1 weighing beam, 100 mm x 100 mm, length 2,300 mm, designed as a U-profile, 10 mm thick, with holes for mounting the load cells. 1 weighing beam, 100 mm x 100 mm x 1,400 mm long, designed as a U-profile, 10 mm thick, with holes for mounting the load cells, including a support plate made of 10 mm steel, reinforcing plates made of 10 mm steel plates, and 20 mm x 20 mm square steel for lateral guidance of the weighing beam. For weight measurement, 1 load cell kit BKSB 15000 with a weighing range of 15,000 kg and a readability of 2 kg is used, consisting of 4 x K30S 5000 load cells with spacer plates, 4 load feet, 1 JBB-04 junction and trimming box, and 10 m weighing cable for the display electronics. A BWI weighing electronics unit serves as the weighing electronics, featuring an illuminated 50 mm large display, dimensions 250 x 160 x 60 mm. It is housed in a high-quality, flat plastic case and offers user-friendly operation. Basic functions: tare, zero, gross/net. After assembly, the container scale is programmed to zero = empty Kat 3 container tare weight. The power supply is 220 volts. Dedpfx Alegyph Aobecl Price: 5,620 € plus VAT.

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, PAGO System L600 Pharmaceutical Labeling Machine | Extensively modernized | GMP | Immediately available Manufacturer: PAGO Etikettiersysteme GmbH (Fuji Seal) Model: System L600 Year of manufacture: 2013 For sale is a high-quality PAGO System L600 labeling machine for the pharmaceutical industry. The machine is suitable for labeling vials, injection bottles, and other cylindrical containers in a GMP environment. The machine was already upgraded and modernized at the factory in 2018 to handle additional product formats. In 2022, we purchased the machine used and immediately took it to the manufacturer, Fuji Seal / PAGO Germany. There, it was completely inspected, serviced, and extensively modernized. Investments of €60,200 were made in these measures. Before delivery, a complete Factory Acceptance Test (FAT) was carried out at the Fuji Seal factory. The machine is in very good technical condition and is ready for immediate use. Equipment Laetus/Keyence vision system for print and code inspection New Allen / Novexx thermal transfer printer Siemens PLC control Touchscreen operation Unwinding station Outfeed station Servo drives Stainless steel GMP design Dcedpfxszpzbfs Albjl Complete protective enclosure Original documentation Technical data Output up to 120 products/min For vials and injection bottles GMP-compliant design Year of manufacture 2013 Manufacturer: PAGO Etikettiersysteme GmbH Why is the machine being sold? For our new pharmaceutical CMO plant, we have purchased two new labeling machines. Due to space limitations, this machine is no longer needed. Advantages Extensive modernization by Fuji Seal / PAGO Documented investment of €60,200 Factory upgrade already in 2018 Complete FAT at the manufacturer Very well-maintained condition Immediately available Significantly cheaper than a new machine A comparable PAGO/Fuji Seal pharmaceutical labeling machine costs over €450,000 in 2026, depending on the equipment and automation. Inspection is possible at any time by appointment. We will gladly send you further photos, videos, and technical documentation upon request.

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME USE: The compact bending machine enables precise and repeatable bending up to an outer diameter of 100 mm stationary and directly at the assembly site. Transport is possible with lift trucks or the optional rollers. A powerful three-phase motor and a precision gearbox provide a powerful drive. The machine convinces with its compact and slim design as well as the very free bending range. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set easily and quickly via a convenient and menu-driven user interface in 14 languages with touchscreen control, which guarantees even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback.With the help of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result. The principle of "stationary tube and rotating tool" ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes. With the profile bending attachment PB20 flat, square and round bars can be bent without any problems. Extremely small bending radii are made possible with the KBV small bending attachment. POSSIBLE AREAS OF APPLICATION: - Plant engineering - Hydraulic piping - Meander bending - prototyping - Sanitary and heating engineering - shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material Djdpfx Aondk N Aelbjcl three-phase current 400 V - Bending radius up to 500 mm - Multifunctional machine control Bending angle adjustment (0,1°) - Maximum bending angle 240 - Safety foot switch with emergency stop - Weight 600 kg OPTIONAL ACCESSORIES: - Adapter system for tools from model series 3000/6000 with bending radius from 45 mm, incl. hexagonal shaft 40 mm - Profile bender PB20 - for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm - Small bending device KBV - Special tools according to specification - Software adaptations for special tasks OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: as good as new (ex-display), We offer you high-quality roll-off containers with mutually angled outer walls, custom-made to your specifications! Designed for the most demanding applications, manufactured from HB450 HARDOX®. Equipped with a folding net system for quick and secure load securing. ⚠️ Unfortunately, many dealers advertise with the Hardox brand name but do not use Hardox! We exclusively use "original" HARDOX® from the manufacturer SSAB! Our containers have a sticker with a QR scan code. You can use the number to verify the "authenticity" of our products! --- FINANCING --- LEASE-TO-OWN --- LEASING --- Dcodpfxjzpfx Ie Albjl -possible, please contact us!- Heavy-duty design for use in the scrap and demolition industries. Dimensions: 6500 x 2300 x 2400 mm 7000 x 2300 x 2400 mm Other sizes available on request. Suitable for systems according to DIN 30722-1 / 2 Tested and approved according to DGUV rule 214-017 Crossmember: INP 180 Mounting bracket Ø 60 mm, hook height 1,570 mm -semi-automatic folding net system -floor made of 5mm HARDOX® HB450 -side walls 3mm HARDOX® HB450 -end profile made of 5mm Strenx® 700 special edge profile -rear crossmember made of 5mm Strenx® 700 special edge profile -center crossmember made of 3mm Strenx® 700 special edge profile -door latch, Holland model + safety latch -lateral central latch -all-around tarpaulin and net hooks -ladder on the front, galvanized -primed once on the inside, double-coated on the outside -double-coated, solid color on the outside, in your desired RAL color Optionally available on request: -crossmember INP 220 -roll cover -steel lid with winch / hydraulics -ladder on the rear door -additional crossmembers / belly band -French flap -swing flap -grain slide What sets us apart from others? - Robot-welded component groups - All welds are continuous at the crossmembers - All containers are bead-blasted - Double-primed - Double-coated - All containers have nameplates and valid UVV testing certificates. Visit us on our website!

Year of construction: 2025, condition: new, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 1.4.B62.00 5000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dcjdjlxyhfepfx Albel Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the filter cartridges - cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE POWERFUL BENDING MACHINE FOR WORKSHOP AND ASSEMBLY. The compact and mobile bending machine enables precise and repeatable bending up to an outer diameter of 60 mm stationary and directly at the assembly site. A powerful three-phase motor and a precision gearbox provide a powerful drive. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set quickly and easily via a convenient, menu-driven user interface with touchscreen control, which guarantees even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback. With the aid of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result. The "stationary tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square and round bars can be bent without any problems.Extremely small bending radii are made possible with the KBV small bending attachment. POSSIBLE AREAS OF APPLICATION: - Plant engineering- Hydraulic piping - Meander bending- prototyping- Sanitary and heating construction TECHNICAL DATA: Bending capacity 6000S: Ø 6 to 50 x 4 mm alternating current 230 V Bending capacity 6000D: Ø 6 to 60 x 4 mm Bending capacity 6000DS: Ø 6 to 60 x 5 mm three-phase current 400 V Bending capacity 6000D: Ø 6 to 60 x 4 mm three-phase 400 V - Bending radius min/max: 36 mm/280 mm - Optional large bending radii up to 500 mm - Multifunction machine control Bending angle adjustment (0.1°) - Maximum bending angle 240 - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop - Weight 110 kg OPTIONAL ACCESSORIES: - Profile bender PB20 - for bending flat and square iron up to max. 100 x 10 mm, round iron up to max. 20 mm - Roller bender RB43 - The RB43 is placed on the 6-edge shaft of the bending axis. By switching over to endless bending, the bending system acts as a drive unit. - Small bending device KBV Dcsdong Ax Sjpfx Albol - Special tool according to specification OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation-information meeting at your site - Consultation and handling as leasing/financing purchase via - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE PRECISION 3-ROLL BENDING MACHINE When developing the compact and mobile horizontal bending machine, the focus was clearly set on the production of dimensionally accurate coils such as handrails for spiral staircases. This is the supreme discipline, since two mutually influencing variables (radius and pitch) must be combined in a bend to form a dimensionally accurate geometry. The interaction of tube calculation on the PC, implementation on the bending machine, and control via the measuring equipment with final correction of the bending values ensure accurate bending. By simple and few inputs into the PC tube calculation program, the local printer provides a printout and supports the calculation of all necessary bending and correction data to operate the machine. A new powerful drive concept allows infinitely variable adjustment of the bending speed, requiring only a 230 V (AC) connection. Hardened steel tools as well as hard plastic tools that are gentle on the surface are available for selection. To ensure optimum feed even with tight bending radii, all three bending shafts are driven. The drive concept also proves its worth in tough daily use on the flat, when bending tubes and profiles. Customers of the 4800, 5000 and 6000 bending system have the option of purchasing the roller bending unit without the drive. The roller bending unit with the designation RB43, can be adapted to the bending systems 4800, 5000 and 6000 via the bending shaft. In this case, the machines act as a drive unit. POSSIBLE APPLICATIONS: - Handrails/bottom rails for spiral staircases - Large tubular profile bends - General metal construction TECHNICAL DATA: - Bending capacity Ø 10 to 60 mm - bending radius min: 300 mm at Ø 42,4 mm - Bending direction right and left - Digital bending adjustment for radius and pitch - Safety foot switch with emergency stop function - Maintenance-free robust three-phase motor - Construction site suitable 230 V connection - Weight 280 kg OPTIONAL ACCESSORIES: - Support roller - for stabilization - Lifting roller - to produce controlled slope - MGR - measuring device to determine the correct radius - MGV - measuring device to determine the correct slope based on torsion - MPW - PC calculation program to determine the correct bending values - RB4303 - universal bending tool for profiles up to 60 mm height - Tools for special profiles OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room Dsdpeng A R Ssfx Albecl - Consultation-information meeting at your site - Consultation and handling as leasing/financing purchase via - Service contracts, maintenance at your site

Condition: used, Year of construction: 2006, Stamping Press Manufacturer: Schuler Pressen GmbH & Co. KG, Göppingen, Germany Type: SAL 250-1.9 Mark II Serial number: A/260156 (Machine No. 2006-260156) Year of manufacture: 2006 Press force: 2,500 kN (250 tons) Stroke rate: 80–400 strokes/min Drive power: 51 kW at 2,000 rpm Ram stroke: 30 mm Ram adjustment: 100 mm Ram lift: 75 mm Installation height (table plate to ram, ram stroke bottom, ram adjustment top): 550 mm Table dimensions: 1,950 x 1,060 mm (as per drawing) Ram face: 1,950 x 800 mm (as per drawing) Compressed air: 5.5 bar Total weight (excl. feed): 48,000 kg Control system: SYS PACO 8000 Sound-insulating enclosure (orange) Dcsdpjzil S Iefx Albol Strip Feed Unit Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Type: KRS 18.260/19-2000.2H-BF1 Serial number: 40 871 Year of manufacture: 2006 Connected load: 15.5 kW Supply voltage: 400 V, 50 Hz Decoiler Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Model: 18 260-1000.2 Serial number: 40 466 Year of manufacture: 1984 Connected load: 8 kW Supply voltage: 380 V, 50 Hz

Condition: ready for operation (used), Shot blasting system MHG SMG 45 K (negative pressure booth) -Work area: 1100x660x700 mm Djdpsztrk Eefx Albscl -Integrated dust extraction system -Two side doors / dust-tight sealing -System with double walls, sound-insulated and foam-filled -Blasting gun with nozzle -Operating pressure: 3 - 7 bar -On/off switch for lighting and dust extraction -Pressure regulator - Manometer - Foot switch -Viewing window -Documentation Dimensions: L x W x H 1.5 x 1.6 x 1.8 meters / Weight: 380 kg Subject to errors and omissions.

Condition: new, Year of construction: 2025, PROFILE BENDING ATTACHMENT PB20 The PB20 profile bending attachment is the optimal supplement for tube bending on the 3000 and 6000 models. The device can be easily and quickly mounted on the bending shaft without the use of tools. The workpiece is clamped onto the turntable with the clamping device and pulled around the bending tool. With this system, leg lengths to be bent can be accurately measured in conjunction with a length stop and can be bent with repeatable accuracy. TECHNICAL DATA: - Bending capacity steel 37: 100 x 10 mm, Ø 20 mm. - Many standard tools available - Special tools possible - Sharp-edged tools with bending radius R2 or 5 mm - round tools R 10 to 25 mm for bends max. 260° optional Dcjdpfx Aljnh R Ekjbsl OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE PRACTICAL HAND BENDING DEVICE: The compact, mobile design allows precise and repeatable bending in the vice. Drive is provided by a screw-in handle. A lockable adjusting ring ensures repeatable bending. The exchange of the plug-in tools is conceivably simple. The principle of "stationary tube and rotating tool" allows bending with the smallest possible footprint. For thin-walled tubes, sliding shoes are used for crease-free bending in order to produce bends with the least possible deformation from, for example, stainless steel and copper tubes. The optional version with a hexagonal mount allows the drive force of the 3000 and 6000 bending systems to be used in addition to the vise. For this purpose, the KBV is simply placed on the bending shaft of the machine. POSSIBLE APPLICATIONS: - Hydraulic piping - prototype construction - Sanitary and heating construction TECHNICAL DATA: - Bending capacity Ø 6 to 18 mm - Manual bending angle limitation - Maximum 180º bending result OPTIONAL ACCESSORIES: - KBV with hexagonal fixture for bending on model 3000 or 6000 - Machine case - Length stop OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via Dsdpfx Along Amksbscl the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2026, 200L mobile pressure-blasting vessel for construction sites or stationary use. Fittings are securely mounted under the handle. Very well suited for robust site applications. Comprising: Djdpfsynr E Tex Albjcl - 200L pressure vessel - Pre-sieve - Weather protection lid - Water separator - Pressure regulator - Adjustable conveying air control (air quantity for vessel and blast hose) - Blast hose Ø25mm, 10m - Venturi blasting nozzle Ø8mm (air consumption at 6 bar approx: 3.57m³/min) - Abrasive metering valve, Y-piece rubber coated for reduced wear - Breathing air filter with 10m air hose - Blasting helmet Safety equipment: - Dead man's switch with control cable - Controlled quick venting Optional: - Larger handle with hose holder - Wet blasting head - Breathing air heater - Transport frame with bucket (Hobbock) and lid as an attachment for extended blasting without refilling - etc. Manufactured in Germany

Year of construction: 2008, condition: good (used), Machine type: Finishing machine Manufacturer: Supfina Grieshaber GmbH & Co. KG Model: 622/1 Serial number: 760001 Year of manufacture: 2008 Available immediately Located at [location] for self-dismantling Dedpslrt Saefx Albjcl Dismantling and loading can be offered as an option.

Condition: new, Year of construction: 2025, Dedusting system with pre-chamber separator specially developed for aggressive sandblasting dusts, complete essentially consisting of: a) 1 cartridge dry filter, type PF 1.16.B250 15,000m³ (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas compartment with filter cartridges and clean gas compartment with filter cleaning by means of compressed air, each with separate maintenance doors that are easy to open. Dcsdpert H Izjfx Albjl Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the 16 filter cartridges - cleaning. Technical data, approx. Type PF 1.16.B250 W x D x H 1.6 x 1.9 x 4.2m Air flow rate 15000 cbm/h Filter cartridges 16x 15,6m² Filter area 249.6 m² Filter medium PE fiber fleece Residual dust content 99.9%

Condition: new, Year of construction: 2026, We offer roll-off containers in various sizes, available on request. Color: RAL color of your choice Delivery throughout Europe Dimensions: 40 cubic meters 7000 x 2380 x 2400 mm Other dimensions are possible! 4.0 - 7.0 m x 2.38 x 2.4 m Reinforced design with lateral “belly bands”. Dcedpfx Alozg Ipqobel Suitable for systems according to DIN 30722-1 / 2 Tested and approved according to DGUV Regulation 214-017 Material thicknesses: Base: 5 mm Walls: 3 mm Crossmember: INP 180 Rounded transition between base and wall -End profile made of round tube -Door lock, Holland model + -Lateral central locking -All-round tarpaulin and net hooks -Ladder on the front -Primed once on the inside, double-coated on the outside -Double-coated in a single color on the outside, in the RAL color of your choice Optionally available: -Spar distance 50 cm -Transverse spars -Mounting bracket, Ø 60 mm -Roll tarp -Steel cover with winch / hydraulics -Net system for covering / securing the load -Ladder on the rear door -Additional spars / belly band -French flap -Swing flap -Grain slide

Year of construction: 2023, operating hours: 100 h, condition: good (used), functionality: fully functional, Water treatment system for compounding and extrusion plants For sale is a complete industrial water treatment system for supplying a compounding or extrusion plant with softened and fully demineralized process water. The system consists of pre-filtration, a dual softening unit, a reverse osmosis unit, a 3,000-liter permeate tank, and a frequency-controlled dual booster pump unit. The system is particularly suitable for closed-loop cooling water circuits and for applications where a consistently high water quality and a reliable supply to the production plant are required. System configuration Pre-filtration and protection Backwash filter for mechanical impurities Flow rate: 7.5 m³/h at a pressure drop of 0.5 bar Automatic, time-controlled backwash System separator with a KVS value of 12 m³/h Connection size: R 1" Pressure regulator with a DIN flow rate of 5.3 m³/h Safety module Connection block with integrated bypass and sampling valve Flexible pressure hoses, length 1,000 mm, Rp 1", up to 10 bar Dual softening unit Dual softening unit for continuous operation Nominal flow rate: 2.9 m³/h Capacity: 200 m³ × °dH each Resin disinfection system Salt deficiency switch with potential-free alarm or low-level signal Sampling group with pressure gauge and sampling valve Hardness control unit for wall mounting Installation fitting for 1" pipe Due to the dual design, one softening column can be regenerated while the second column continues to supply softened water. Reverse osmosis unit Reverse osmosis unit with vertically arranged high-performance modules, permeate recirculation, and automatic concentrate flushing. Dcjdpfxozt Sb Dj Albjl Technical data: Permeate flow rate at 15 °C: approx. 450 l/h Recovery rate: approx. 75 % Salt rejection rate: approx. 98.5 % Required inlet pressure: 2–6 bar Feed water connection: DN 25 Permeate connection: DN 20 Concentrate connection: DN 15 Supply voltage: 3 × 400 V / 50 Hz Dimensions: approx. 1,800 × 610 × 810 mm (H × W × D) Permeate tank Black PE storage tank Capacity: 3,000 liters With level control and various connections Dimensions: approx. 1,750 × 995 × 2,450 mm (H × W × D) Dual booster pump unit Pre-assembled and electrically wired booster pump unit on a stainless steel frame, ready for connection. Equipped with two pumps and integrated frequency converters for constant and demand-based pressure supply. Technical data: Nominal flow rate per pump: 2.0 m³/h Nominal head: 43.6 m Flow rate with one pump: approx. 0.6–3.0 m³/h Flow rate with two pumps: approx. 1.2–6.0 m³/h Delivery pressure at maximum flow rate: approx. 2.5 bar Zero flow head: approx. 6.7 bar Factory-set constant pressure: 4.0 bar Pre-pressure of the diaphragm expansion tank: 3.5 bar Measuring range of the pressure sensors: 0–10 bar Diaphragm expansion tank: 8 liters Permissible water temperature: 1–30 °C Permissible ambient temperature: 1–40 °C Suction connection: DN 65 / PN 10, loose flange Pressure connection: 50-mm socket Supply voltage: 3 × 380–500 V Motor power: 2 × 1.1 kW Nominal current per pump: 2.2–1.9 A Dimensions: approx. 950 × 700 × 858 mm Dry weight: approx. 55 kg Technical specifications based on available documentation. Subject to prior sale and errors. An inspection of the system is possible by prior arrangement.

Condition: used, Linear unit, linear axis, gantry axis with magnetic drive, linear guide for magnetic linear motor, electric slide Manufacturer: GEIGER Handling GmbH & Co. KG Type: Motion Liner 20.0 Serial No.: 228773 2207 02659 Year of manufacture: 2022 with 2x linear guide REXROTH N R160 520 431 PTS / FD274 / RO10 Length of the guide rail: 3790 mm Length of the base body - overall length: 3980 mm - Standard linear guide BOSCH REXROTH series R1605 - guide rail 15 mm Dedpfxozinxqs Albscl - Base body profile made of steel 200 x 95 mm - Measuring system with metal tape RSF MS 40.x6 MK (measuring length 3440 mm) - Base body with permanent magnet bed for linear motor Overall dimensions L x W x H: 3790 x 200 x approx. 140 mm Weight: 162 kg (weighed) very good condition - like new, unused from stock

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1 790 58 450, turning length: 990 mm, turning diameter: 160 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 1,500 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 2,400 mm, spindle motor power: 30,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 100 m/min, rotational speed (min.): 1,500 rpm, rotational speed (max.): 4,500 rpm, total height: 2,950 mm, total length: 5,550 mm, total width: 2,550 mm, feed length X-axis: 280 mm, feed length Y-axis: 2,400 mm, feed rate X-axis: 30 m/min, feed rate Z-axis: 100 m/min, type of input current: three-phase, torque: 191 Nm, overall weight: 16,000 kg, chuck outer diameter: 215 mm, spindle nose: A6, mount diameter: 40 mm, Equipment: documentation/manual, rotational speed infinitely variable, Manufacturer: J.G. WEISSER SÖHNE GmbH & Co. KG Type: UNIVERTOR AS90/650RT General features: Machine type: Horizontal shaft turning center with pick-up loading Area of application: Complete machining of shafts and rotationally symmetrical components Loading: Pick-up automation Processing types: Green turning, hard turning, roughing, finishing Tool carrier: 12-way turret with electric drive (VDI 40) Additional options: Driven tools, rotary turning, NC-adjustable steady rest, measuring probe Main spindle: Spindle bearing diameter: 90 mm Spindle flange: A6 according to DIN 55026 Drive power (100/40% ED): 18/23 kW or 23/30 kW Nominal speed: 1,500 rpm Maximum speed: 4,500 rpm Torque (100/40% duty cycle): 115/146 Nm or 151/191 Nm Travel paths & axes: Max. turning diameter: 160 mm Max. chuck diameter: 215 mm Center distance: Max. 990 mm Travel paths X/Z axis: 280 mm / 2,400 mm Max. feed force X/Z (40% duty cycle): 10 kN / 8 kN Max. travel speed X/Z: 30 m/min / 100 m/min Dcsdpfx Alsvxf U Eebjl Tailstock: Pressure force: 850 daN Centering center holder: MK4 Max. speed: 4,500 rpm Dimensions & weight: Machine dimensions (L×W×H): 5,550 × 2,550 × 2,950 mm Weight: 16,000 kg