Used Lifting Table 6,5 X 3 M for sale (118,788)

Condition: new, maximum load weight: 35,060 kg, overall weight: 45,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Below is an excerpt of the equipment. Complete equipment list available upon request. Fgsdpfxoz N Nx Dj Al Aeh GOOSENECK: Gooseneck designed as a loading platform with a surface made of aluminum tear-plate sheeting. Hydraulic lifting drawbar, adjustable by approximately -280/+250 mm. Two kingpin positions at approximately 2,300 mm and 2,000 mm. For semi-trailer: 4 x 2, 6 x 2, or 6 x 4. - 2-inch kingpin. - 3 pairs of recessed lashing rings on the gooseneck (LC 6,300 daN). - ASPÖCK-UNIBOX on the front connection bar with 24N, 24S, and 15-pin sockets. - 24N connection according to ISO-1185. - 24S connection according to ISO-3731. - 15-pin connection according to ISO-12098. - Yellow-red air couplings on the front connection bar. - Lighting for the operation of the gooseneck, suspension, and hydraulic locking, with on/off switch. - Brackets for hanging the supply lines on the front of the gooseneck. - Operation of all work lights in the gooseneck area via on/off switches on the gooseneck (operation of the work lights from the semi-trailer is not possible in this case). LOADING PLATFORM: Loading platform, length approximately 9,500 mm, with angle profiles attached underneath to accommodate the load pallets (distance from kingpin to center of axle unit approximately 8,000 mm). - BPW axle stub, with drum brakes and single-wheel suspension, hydraulic axle equalization with lifting and lowering mechanism. - Lowering lock on the axles in case of suspension air spring failure, designed for a maximum pallet height of 150 mm. - 385/65 R 22.5 (M+S) - Manufacturer of our choice. - Mechanical drop-side supports for approximately 48,000 kg of support load. - Access ladder mounted on the front right with 2 retractable handrails. - Removable full fender on both sides in front of the axle unit. - WABCO Roll Stability Support (RSS). - 9 pairs of lashing rings on the longitudinal beams (LC 6,300 daN). - Grid flooring support on the longitudinal beams, at the same height between the guide rails of the load securing system. - The first and last axle on the left and right can be manually lifted. - Storage box on the left and right behind the axle unit, protected from splashing water. - Beveled rear end for easier insertion of the load pallet. - Eyelets attached to the rear crossmember for mechanical locking. - Rear door with cross bracing, hinged on the left and hydraulically locked on the right, can be locked horizontally at 90°, 105°, and 270°. - Underrun protection that can be folded upwards for the transport of up to 4 empty standard pallets. - License plate with holder including lighting on the rear door. - One 7-pin socket on the rear crossmember. - Electro-hydraulic unit for operating the hydraulic functions (without installation in the semi-trailer). - TPMS tire pressure monitoring sensors installed in all wheels. - TPMS tire pressure monitoring system according to ECE R 141. - Indicator lights to display the nominal ride height in the vehicle control area. - 1 odometer mounted on the left. - 2 axle load gauges mounted on the left side, including axle load diagram. - 2 rubber buffers in the front of the loading platform as a stop for the load pallet. - Hydraulic preparation including control for the installation of 4 pairs of our hydraulic load securing systems. - 1 spare wheel holder on the right in the direction of travel. - Acoustic warning signal

Condition: new, bore capacity in steel 30 mm threading cutting capacity: M20 throat 260 mm bore stroke 125 mm spindle taper MK 3 feed range - spindle 0 mm/U spindle turning speed range 80 - 1440 / 180 -3200 U/min transmission ratio 2 Stufen column diameter 110 mm table surface area 500 x 365 mm total power requirement 0,8 / 1,4 kW weight of the machine ca. 0,27 t dimensions of the machine ca. 0,4 x 1,2 x 1,9 m Fsdpfxefg U Tno Al Aogh Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: used, Year of construction: 1983, Hydraulic Shear HACO HS 3010 Capacity: 3000 x 10 mm Back gear gauge travel: 1000 mm Year of construction: 1983 Manual adjustment of the clearance between blades Cutting angle: 1° to 3° Voltage: 380 V Dimensions (L x W x H): 4000 x 2100 x 2200 mm Fgjdpfsz Izmcjx Al Ajh Weight: approx 8 T

Condition: used, Cast iron bed Fjdpfx Aloz H Ixcs Ajgh Length: 2300 mm Width: 1900 mm Thickness: 200 mm Height on feet: 980 mm 5 T-slots horizontal and vertical T-slots dimensions: 60 x 35 mm Square dimensions: 365 x 365 mm Crack at a longitudinal T (see photo) Weight: approx 3 T

Condition: excellent (used), functionality: fully functional, Aluminum silo with extended support ring - used - Volume: approx. 48,000 liters Container type: silo Condition: used Suitable for food: yes Construction: vertical Internal diameter: approx. 2,400 mm Cylindrical height: approx. 13,750 mm Overall height: approx. 15,000 mm Specific gravity of medium: 0.8 t/m³ Operating pressure: non-pressurized Material / Design Shell material: aluminum Features Support structure: foot ring/stand collar Top end plate: conical top Slope: approx. 15% Bottom end plate: cone Cone angle: 60 degrees Top: 1 x flange DN 100 PN 10 (filling) 1 x flange DN 150 PN 10 (vent) 1 x flange DN 150 PN 10 (level measurement) 1 x flange DN 100 PN 10 (spare) 1 x threaded socket 1 1/2" (sensor technology) 1 x roof edge railing with handrail 2 x crane lugs Shell: 1 x stand collar door (approx. 880 x 1800 mm) 5 x pipe brackets for filling pipe 5 x pipe brackets for overflow pipe 1 x filling pipe DN 100 (filling lines and connections for silo trucks may need to be retrofitted in part) 1 x overflow pipe DN 80 1 x threaded socket 1 1/2" (measuring probe) Bottom: 1 x cone (60°) 1 x flange DN 80 (overflow pipe) Fittings: The measuring and control equipment currently installed (where present) is included in the scope of delivery. However, no warranty is provided for its functionality! Otherwise as shown in the photos and drawing. Fjdpsx Stccofx Al Ajgh Documentation: Drawing

Condition: used, functionality: fully functional, Aluminum silo with a long base ring (flour silo) Technical data / Dimensions Available quantity: 3 Volume: approx. 63,200 liters Container type: Silo Condition: used Food-grade: yes Design: standing Inner diameter: approx. 2,400 mm Outer diameter: approx. 2,500 mm Cylindrical height: approx. 17,500 mm Overall height: approx. 19,000 mm Specific weight of the medium: 0.60 t/m³ Operating pressure: Non-pressurized Material / Properties Material, inner lining: Aluminum Notes: Material: AlMg3 Equipment Base design: Foot ring / base ring Number: 1 Mounting: fixed Bottom type, top: Conical bottom Bottom type, bottom: Cone Top: 1 x Roof edge railing with handrail 2 x Crane lugs 1 x Overpressure valve 1 x Strainer on flange DN 1000 with reducer 1 x Flange for level limit indication 2 x Flange for level measurement The connections vary slightly between the three existing silos. Shell: 1 x Manhole DN 500 with star-grip closure 1 x Vent dome DN 500 1 x Access door 850 x 1800 mm 7 x Pipe clamps for filling pipe Fodpfxozw Nv Te Al Ajgh 1 x Filling pipe, ending in a threaded connection at the bottom 2 x Cable protection conduit DN 50 Bottom: The silo has a 40° cone at the bottom, which ends in a flange DN 1500 for the attachment of a vibratory floor. At the bottom / cone: 1 x Vibratory floor VB 1400 with motor and emergency shut-off slide Notes: The currently connected measuring and control technology is included in the above offer. However, no guarantee is given for its function! There are a few weld seams on the base ring (closed connections / openings).

Condition: new, Year of construction: 2025, hydraulic CNC bending machine - order machine (delivery time approx. 10-14 weeks), incl. hydraulically dynamic camber, touchscreen, pressure regulation of the upper beam, backgauge (1000mm), goat feet with automatic tool clamping, electric/hydraulic adjustment of the bending beam Fsdpfx Ajg Avglel Asgh -images similar-

Condition: good (used), Cast iron bed - Floor Plate Useful surface (L x W x H): 3600 x 1200 x 300 mm 4 T-slots: width 44 x 26 mm Fodpfsz I A Ubox Al Aegh Equipped with Levelling feet Weight: approx 3 T

Condition: good (used), Year of construction: 1981, machine/vehicle number: 2627, Offer 26236 Fgjdpfxsz Nypgo Al Ash Technical Data: - max. working width 3040 mm - max. material thickness ST 37 4 mm - swiveling upper beam - bending angle adjustment, electronically pre-selectable 0 - 135° - max. lifting height of the upper beam 350 mm - lifting height of the upper beam, electronically pre-selectable - adjustability: - of the bending beam 125 mm - of the lower beam 125 mm - upper beam drive 400 V / 4.0 kW - bending beam drive 400 V / 5.5 kW - space requirement approx. W 3950 x H 1600 x D 1200 mm - weight approx. 4800 kg - includes: - foot pedal - bending rails - backstop

Condition: used, first registration: 07/2011, loading space volume: 31 m³, Year of construction: 2011, KEMPF 31 m³ HARDOX Tip Trailer with Roll Tarp and Lift Axle !! Top Condition !! • Disc brakes • ABS • Air suspension • Lift axle • 3 x air-suspended 9 t SAF axles • Lifting/lowering device • Paver brake • Approx. 31 m³ capacity • Platform • Roll tarp • Tool box • Grain discharge slide • Hydraulic tailgate • Tyre size: 385/65 R22.5 on steel rims • Tread depth: 6/7/6/9/5/5 mm • ALCOA rims • Gross weight: 35,000 kg • Unladen weight: 6,580 kg • Internal dimensions (approx.): 9,000 x 2,450 x 1,600 mm - Main inspection (HU)/Safety inspection (SP): new! Fgsdpowmpmyjfx Al Ajh Subject to errors and prior sale!

Condition: new, Year of construction: 2026, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,000 kg, total length: 44,800 mm, total height: 4,500 mm, load per truss pair (max.): 3,000 kg, number of shelf rows: 4, frame height: 4,500 mm, clear span: 3,600 mm, clearance between the columns: 3,600 mm, frame width: 1,100 mm, shelf height: 4,500 mm, shelf length: 44,800 mm, support length: 3,600 mm, 4 rows of pallet racking (M45113615-3) each 11.3 m long, 4.5 m high, 1.1 m deep, each with 3 bays, 3.6 m wide, each with 3 crossbeam levels, load capacity per bay 3000 kg. - 16 frames (RM4511 - RAL5019) - 32 base plates, shims, screws - 64 floor anchors (ZZBA1210) - 72 single crossbeams, 3.6 m long (T3615 - RAL2008) - 4 load capacity signs (BSMcP) Frames are bolted together, not pre-assembled. Freight/Delivery: - max. 20 working days after receipt of payment - delivery free to construction site/assembly location - unloading from the truck is carried out by the buyer using their own lifting equipment Fedpfxszrr Nfo Al Asgh - deliveries are made throughout the Federal Republic of Germany; excluding islands! Deliveries to EU countries are possible by individual agreement.

Condition: used, maximum load weight: 32,300 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2016, loading space length: 13,630 mm, loading space width: 2,480 mm, loading space height: 2,720 mm, Equipment: ABS, * NET TOP PRICE * SAF axles with disk brakes * 2 x lift axles (1/3) * Coil trough 9 meters * Lashing eyes l&r * Edschaverdeck * Portal doors * Tool box * LxWxH: 13.63 x 2.48 x 2.72 * Unladen weight: 6,700 kg * German vehicle * good condition Subject to errors and prior sale !!! Sale takes place under exclusion of any warranty! - Mi goworim po Russki - We speak english Fgedpjuc Inwsfx Al Ajh - Mówimy po polsku

Condition: defective spare-parts repository (used), Year of construction: 1997, machine/vehicle number: 885258, Defective hydraulic CNC press brake Offer 25514 Technical data: - Max. working length 3060 mm - Distance between uprights 2690 mm - Max. pressing force 1300 kN - Max. distance between table and ram 370 mm - Upright overhang 410 mm - Ram stroke 215 mm - Stroke speeds: - Downward speed (idle) max. 200 mm/s - Upward speed 135 mm/s - Downward pressing speed 1 to 11 mm/s - Total drive power 18 kW - Pneumatic connection 6 bar - Space requirement approx. W 3800 x H 2400 x D 2400 mm - Weight approx. 11500 kg - Including: Fsdpfx Alox Ew Dqs Asgh - 6-axis CNC control system DELEM - Two-hand control panel with foot pedal - Crowning device - Controlled back gauge with height adjustment 5 - 860 mm - Hydraulic upper and lower tool clamping - Die table movement pneumatically assisted - Machine does not perform referencing because 2 axes on the right side of the back gauge are not functioning; control module may be defective.

Condition: new, sheet width 2050 mm plate thickness 3 mm distance between columns 2100 mm back stop - adjustable 600 mm connected load kW weight of the machine ca. 1,1 t dimensions 2,7 x 2,1 x 1,4 m The machine works quietly and it is energy-saving by its gear motor and brake system. Our machine is manufactured as steel construction monoblock body welded from ST42 quality material. The blades on the machine are of 2379 quality and the brand’s name is BOHLER. These high-quality blades ensure quality and precise cutting. Fgodpfofv H Dkox Al Aoh Emergency stop button and finger guard grill are standard equipment of foot pedal machine.

Condition: used, Year of construction: 2023, overall weight: 70 kg, terms of delivery: FCA Pegnitz Fgodpfxszkb Dis Al Aeh delivery time: on request terms of payment: 100% prior to delivery

Condition: new, Year of construction: 2026, machine/vehicle number: P790, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, pressing force: 150 t, stroke length: 265 mm, operating speed: 200 mm/s, reverse speed: 150 mm/s, table length: 3,100 mm, throat depth: 305 mm, distance table to ram: 450 mm, clearance between the columns: 2,600 mm, oil tank capacity: 290 l, overall weight: 12,500 kg, Equipment: CE marking, documentation/manual, safety light barrier, The workhorse! A press brake for all applications! The High Quality Press Brake, or HQPB for short, is the top model in the Placke range of press brakes. The entire manufacturing process, from the hydraulic cylinder to the control cabinet assembly, takes place in-house. By using state-of-the-art technology combined with many years of experience in the field of forming technology, the HQPB series enables you to bend at the highest level. Even the standard basic model is a fully functional press brake. This combination of safety, reliability, and efficiency, along with easy operation, allows us to meet the highest demands and precision in the bending process. Press force: 1,500 kN (150 t) Working length: 3,100 mm Distance between uprights: 2,600 mm Installation height: 450 mm Overhang: 305 mm Ram stroke: 265 mm Height of lower ram above the floor: 850 mm Rapid traverse max.: 200 mm/s Pressing traverse max.: 9.8 mm/s Return traverse max.: 150 mm/s Ram positioning accuracy: ± 0.01 mm Ram inclination: ± 10 mm (electrically limited to ± 5 mm) Motor power: 15 kW Hydraulic oil tank capacity: 290 l Operating voltage: 400 V / 3 Ph / 50 Hz Machine weight: approx. 12.5 t Description: > Machine body Steel S 355 N, design based on FEM analysis Side uprights with two pressure cylinders, above floor 2-component structural paint, RAL 7004 / 7016 > Hydraulics & Upper Tool Proportional control valve, electronically monitored cylinder synchronization Double upper ram guidance, Heidenhain scales Separate Y1/Y2 control, inclination monitoring > Tooling Top: WILA hydraulic, NSCL-II-HC Bottom: mechanical clamping for dies with pins (13 × 20 mm) 2 aluminum support arms at the front, approx. 600 mm, height-adjustable > Power Crowning Slim Segmented, mechatronic crowning system Compensates for symmetrical deflection Also compensates for deviations due to wear, sheet metal quality and off-center insertion > Back gauge 4-axis X-axis 1,100 mm, 400 mm/s, ± 0.01 mm R-axis 200 mm, 200 mm/s, ± 0.01 mm Z1 + Z2 CNC, 850 mm/s, ± 0.02 mm, finger spacing min. 50 mm > Control Delem DA 66S 24″ touchscreen on a swivel arm 2D programming, 3D visualization DXF import, tandem operation > Safety & Efficiency CE-compliant, Pilz safety PLC Fgedpfx Aoz Hn D Eel Ash TFS laser light curtain, rear light curtain eco-MODE start-stop automatic > Additional equipment LED work area lighting in the rear Remote diagnostics for Delem control and Pilz PLC Automatic side upright compensation

Condition: new, Bernardo Motorized Sheet Metal Shear MTA 2060 x 3 mm NCC Cutting length 2060 mm Max. sheet thickness * 3 mm Cutting angle 1° 30’ Strokes/min 31 Working height 810 mm Rear stop 0 – 750 mm Table width 390 mm Motor power 4.0 kW Width 2600 mm Depth 2100 mm Height 1260 mm Weight approx. 1710 kg * Material strength 400 N/mm² Features Equipped as standard with a sheet metal holding device, ideal for thin sheets Support arms on the front for easy processing of large sheets Motorized rear stop, precise adjustment via ball screws Fgodpfxed Hxnhs Al Aeh Clearly designed control panel with integrated control Robust steel sheet metal construction for vibration-free operation Support table with a right-angled stop on both sides High operator safety thanks to a protective cover and photocells on the rear of the machine 2-blade cutting knives made of high-quality steel guarantee clean and burr-free cutting Automatically acting clamping device for fixing the sheet Scope of supply Cutting line illumination Motorized NC rear stop Front sheet supports Side stops Protective plate with photocells NC control BRL 401.2 Pneumatic sheet metal holding device Foot pedal with emergency stop Knives made of tool steel

Condition: good (used), Year of construction: 2021, Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: Montech, belt conveyor type TB30-140/M with servo motor -Speed: 87 m/min Fgjdpeyiay Ejfx Al Ajh -Drive: Nucleus NUDrive MP85 10A Bgr2 R Rev2 IP64 -Belt width: 110 mm -Conveyor length: 1290 mm -Transport dimensions: 1310/390/H160 mm -Weight: 15.2 kg

Condition: good (used), axle configuration: 3 axles, first registration: 07/2018, suspension: air, color: blue, Year of construction: 2018, Equipment: ABS, tail-lift, = Additional Options and Accessories = - EBS - Air suspension = Further Information = Axle Configuration Suspension: Air suspension Rear axle 1: Steerable Rear axle 2: Steerable Rear axle 3: Steerable Weights Unladen weight: 14,300 kg Payload: 32,700 kg GVW: 47,000 kg Maintenance, History, and Condition APK (Technical Main Inspection): Valid until 03/2027 Technical condition: good Visual condition: good Vehicle number: Low-loader: 05 Goldhofer MPA 3 / 3-axle PBW, steerable / With remote control / Extendable Fodpfsz Hq Rzox Al Asgh .: WG0MPA037J0039094 TÜV: 03/2027 - Inspection: 09/2026 PBW 3 x steerable axles Hydraulic ramps Remote control Unladen weight: 14,300 Total weight: 47,000 Length: 8.90 m, with extension 12.00 m, total extended length 15.40 m Width: 2.54 m No liability for printing and typographical errors, changes, sales subject to prior sale, and errors. = Company Information = No liability for printing and typographical errors, changes, sales subject to prior sale, and errors. Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email:

Condition: new, Year of construction: 2026, functionality: fully functional, coil weight: 10,000 kg, number of straightening rollers: 6, conveyor belt width: 1,500 mm, sheet thickness aluminum (max.): 3 mm, sheet thickness steel (max.): 3 mm, blade shaft diameter: 255 mm, sheet thickness copper (max.): 3 mm, inner diameter: 510 mm, outer diameter: 1,500 mm, mandrel diameter: 510 mm, mandrel length: 1,500 mm, coil width: 1,500 mm, coil outer diameter: 1,500 mm, number of blades: 8, warranty duration: 12 months, straightening roller diameter: 140 mm, total width: 1,500 mm, Slitting line model 1,500 x 3 mm, comprising: - Decoiler Aspo mod. 1500/5Ton (customizable) - Loading table - Feeder and straightener with 6 rollers, diameter 140 mm - Rotary cutter with 4 pairs of circular blades Fodpex Hr S Sefx Al Asgh - Automatic punching unit with 20 customized punching stations - Mechanical shear - Aspo recoiler

Condition: new, table length 3000 mm table width 1500 mm table height 850 mm Fedpfx Alod Raw Ds Ajgh Vertikal stroke 50 mm weight of the machine ca. 1,5 t dimensions 3,0 x 1,5 x 0,9 m Welding table "SIEGMUND Professional Extreme 850 + Plasma Nitride" is made of through-hardened tool steel from the special alloy Siegmund X8.7 and is plasma nitrided. Surface hardness max. 850 Vickers. The table has a material thickness of approx. 24.5-27 mm. The holes have a diameter of 28 mm. Hole arrangement on the tabletop in a 100 mm diagonal grid, parallel hole arrangement on the sides in a 50 mm grid. Includes basic leg assembly. Accessories shown are optional. Price excludes packaging and shipping.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 12,276 h, load capacity: 1,500 kg, lifting height: 4,300 mm, free lift: 1,460 mm, fuel type: electric, mast type: triplex, construction height: 2,055 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift Load center: 500 Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tire type: Superelastic Rear tire type: Superelastic Battery voltage: 48V Battery capacity: 500Ah Fjdpfx Alez E Tk Ue Asgh Battery year of manufacture: 2020 Description: Side shifter, 3rd valve, load backrest, safety light

Condition: used, functionality: fully functional, overall weight: 2,800 kg, total length: 2,750 mm, total width: 1,500 mm, total height: 1,800 mm, input voltage: 400 V, rotor diameter: 730 mm, rotor width: 600 mm, Hammer mill with swing hammers for secondary size reduction of cable scrap, aluminium, e-scrap and non-ferrous metals. Fgsdoz I I Hvjpfx Al Ajh Technical data: – Rotor: hammer circle diameter approx. 730 mm, width 600 mm, rotor discs Ø 520 mm – Hammers: plate type 215 × 100 × 13 mm, bore 35 mm – Screen: replaceable perforated screen, one fitted – Drive: V-belt, ABB motor frame 225 (approx. 37–45 kW), 400 V / 50 Hz – Electrics completely renewed, new control cabinet included – Hinged upper housing – Dimensions approx. 2,750 × 1,500 × 1,800 mm incl. motor and hopper, weight approx. 2,800 kg Scope of delivery: mill with motor, belt guard and control cabinet; new complete wear part set (hammers, pins, spacer rings, unused); discharge belt conveyor with gear motor. Nameplate missing, manufacturer unknown. The machine runs without problems. Inspection and test run by appointment on site (Cheb, Czech Republic). Loading onto truck on site. Sold as is, price net plus VAT.

Condition: used, maximum load weight: 14,450 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2013, Year of construction: 2013, Equipment: ABS, * Heitling SDHB 31 silo trailer * First registration: 06-2013 * Volume: 31,000 liters * 3 compartments * MB axles * Curb weight: 3,550 kg Fedpozl N Rasfx Al Asgh * Payload: 14,450 kg * Gross vehicle weight: 18,000 kg * More pictures and videos available via WhatsApp * Information without guarantee and subject to prior sale.

Condition: good (used), functionality: fully functional, Year of construction: 2015, operating hours: 8,093 h, load capacity: 3,500 kg, lifting height: 6,500 mm, mast type: triplex, power: 36 kW (48.95 HP), Equipment: cabin, lighting, sideshift, UNiCARRIERS Diesel Forklift - NISSAN YG-1-F-2-A-35-U Year: 2015 According to hour meter: 8,093 operating hours 3.5 ton lifting capacity 6.5 meter lifting height!! 3 meter overall height 36 kW Nissan engine - Triplex mast with full free lift - Side shifter - Load guard - Cabin with heating - Lighting system - Original paint - Immediately ready for use - Front tires in good condition - Rear tires NEW! Fgsdpfxsy Ir Hrs Al Aoh - Simple mechanical forklift! Sales price: €10,900 net Affordable delivery available!