Used Lang Quick Point for sale (11,157)

Condition: ready for operation (used), L & Z Lathe WEILER Condor -Guideways "Good" Gedpfx Akeztfiuo Ueug -Optional 3-axis digital display -Center height 165 mm -Swinging diameter over bed 330 mm -Distance between centers 800 mm -Speed range 28-2800 rpm -Automatic longitudinal / crossfeed -Spindle bore approx. 40 mm -Threading / Metric / Inch, etc. -Collets / Quick-change tool holder incl. 20 collets -Three-jaw chuck -Multifix with inserts -Chip guard -Drill chuck / Follower point -Coolant system -Emergency stop -Documentation Dimensions: L x W x H 2 x 0.8 x 1.6 meters / Weight 850 kg

Condition: used, Year of construction: 2001, functionality: fully functional, P3 foam cleaning for rinsers and fillers Pumps and valves Attached stainless steel cabinet with Siemens S7 control system Gjdjww Hnvjpfx Ak Usug

Condition: used, Year of construction: 1992, functionality: fully functional, Weiler Praktikant 160 B Lead and Draw Spindle Lathe, built in 1992, with a new 3-axis digital display from K&C, from a vocational training workshop! Technical data: >> Year of manufacture 1992, Machine No. 92-160-2994 Guedpfxjzd Tycs Ak Ueg >> Center height 160 mm >> Distance between centers 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore 40 mm >> Short taper spindle head, DIN 55027, size 5, with bayonet lock >> Tailstock, MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake, switchable >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital display from K&C with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pieces, taper calculation, radius/diameter, quick zeros, switching of the counting direction >> 3-jaw chuck 160 mm with 1 set of jaws >> Tool clamping system with 2 steel holders >> Bed stop >> Centering point >> Coolant system >> Rear panel >> Machine feet >> Electronic spindle protection >> Operating manual Additional accessories such as collets, 4-jaw chucks, steady rests, and more are available at an extra charge. For safety: Electronic spindle protection, cover for the lead and draw spindle, 2 emergency stop buttons, spindle brake, electronic door protection for the change gears. About the machine: Offered is a Weiler Praktikant 160 B lead and draw spindle lathe in very good condition. All slides run smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced that are as smooth as if they had been ground. Take advantage of the opportunity to inspect this machine on-site while it is powered up and see its condition for yourself.

Condition: ready for operation (used), Year of construction: 2001, A CNC vertical machining center Quick Jet is offered. Travel X/Y/Z: approx. 1200mm/800mm/700mm, spindle taper: HSK-A80, max. spindle speed: 14000rpm, spindle power: 25kW, spindle torque: 170Nm, tool magazine: 16, max. tool length: approx. 300mm, max. tool diameter: 100mm, max. tool weight: 7kg, rapid traverse X/Y/Z: 24m/min, distance between table surface and spindle nose: 100mm-800mm, table size X/Y: 1350mm/1300mm, max. workpiece weight: 8000kg, control: Heidenhain TNC 530. Including HSK-A80 tool holder inventory. Machine dimensions X/Y/Z: approx. 3335mm/2780mm/3595mm, weight: approx. 11050kg. Inspection possible by appointment. Gsdpfx Akszi Eh Ae Ueug

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C - NEW - Special Light Grey Paint Finish!!! Technical Data: >> Machine no. 92-029 - Year of manufacture: 1992 >> Center height: 140 mm >> Center distance: 500 mm >> Spindle speed: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock Gusdpfeyylqhsx Ak Ueg >> Tailstock taper: MK 3 >> Feeds from 0.012 to 0.9 mm/rev >> Thread types: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 12 mm >> Weight approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> 3-axis digital readout by K&C, new, 12-month manufacturer's warranty, with operating manual Functions: Switching between mm/inch, ABS/INC coordinate selection, value halving, reference point, tool programming for up to 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 three-jaw chuck, 1 set of jaws >> 1 four-jaw chuck, 2 sets of jaws >> Electronic spindle protection >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been newly painted in light grey. A very attractive machine. The 3-axis digital readout by K&C has been retrofitted. All scales are new and equipped with protective covers to shield them from dirt. The carriage runs smoothly and evenly. Take the opportunity to view this machine under power on site and see its condition for yourself.

Year of construction: 2014, condition: excellent (used), functionality: fully functional, METTLER TOLEDO GARVENS XE 3 CC | Dynamic checkweigher with metal detector (CombiChecker) Manufacturer: METTLER TOLEDO GARVENS GmbH Model/Type: XE 3 CC Serial number: 35005097 Year of manufacture: 2014 Guodpfxezgxz Ro Ak Ueg Power supply: 230V / 50 Hz Pneumatic supply: min. 500 kPa (5 bar) Weighing range (Max): 500 g Weighing range (Min): 100 g Verification interval (e): 0.5 g Reading interval (d): 0.5 g Maximum belt speed: 30 m/min Maximum throughput: 50 pcs/min Accuracy class: XIII(1) Operating temperature range: from 0 °C to +40 °C The METTLER TOLEDO GARVENS XE 3 CC professional combined system (CombiChecker) is a top-of-the-line “2-in-1” inspection device that combines the function of a precise dynamic (flow) checkweigher with an advanced Safeline metal detector. The machine is specifically designed for demanding production lines in the food, processing, meat, and confectionery industries, where meeting HACCP, IFS, BRC, and FDA quality standards is crucial. Thanks to its compact design, the system occupies minimal space on the line and allows for the simultaneous execution of two critical control points (CCP). The first module – the integrated Safeline metal detector – reliably identifies all metallic contaminants (both ferrous, non-ferrous, and stainless steel), protecting consumers and the brand’s image from costly complaints. The second module – the Garvens dynamic checkweigher – verifies the weight of products within a range of 100 g to 500 g with an accuracy of 0.5 g in a fraction of a second, automatically rejecting under- or over-filled packages. The central control system allows for quick changes in product assortment and archiving of production statistics.

Condition: used, Year of construction: 2020, Edge banding machine K36, 1 unit, with PLC control (incl. touchscreen) and hot melt adhesive application to the workpiece; rabbeting cutter (incl. DIA tool) up to 3 mm cutting depth; glue reservoir with quick-change reservoir preparation, incl. adhesive dispensing device; high-frequency miter saw station (approx. 16,000 rpm); high-frequency milling station (approx. 16,000 rpm with separate pneumatic milling adjustment); corner rounding cutter (min. workpiece length 300 mm, max. workpiece height 40 mm); radius cutting blade; flush cutting blade (incl. pneumatic extraction); cleaning station; 1 free space for a 2nd milling station or a slot cutting saw (slot cutting saw only if the cleaning station is removed); robust chain drive, ball-bearing mounted double roller pressure pad, viewing window from the rear of the machine, extendable workpiece support, signal lamp for workpiece sequence. Technical data: Max. edge thickness: 3 mm Max. rabbet thickness: 3 mm Min. workpiece height: 8 mm Max. workpiece height: 60 mm Max. rabbet height: 40 mm Min. workpiece length: 160 mm Feed rate: approx. 10 m/min Ready for operation: approx. 5 min. Power consumption: (400V – 3Ph – 50 Hz) Working height: approx. 900 mm Machine dimensions: approx. 5250x1250x2050 mm (L x W x H) Weight: approx. 1700 kg Dust extraction nozzle: 1x140 mm + 1x80 mm 8 mm version K36, 1 unit, quick-change fitting for corner milling cutter K36, 1 unit, extra charge for multi-radius cutting blade (R2/R1) Gedpfxezvhk Hj Ak Usug K36, 1 unit, rabbeting up to 60 mm workpiece thickness K36, 1 unit, release agent spray device, plate K36, 1 unit, cleaning agent spray device, plate K36, 1 unit, nesting for milling station K36, 1 unit, nesting for radius cutting blade K36, 1 unit, pneumatic 3-point adjustment K36, 1 unit, Airtronic K36, 1 unit, extension of the support in the infeed and outfeed by 440 mm each; 1 unit. With the help of the plug-in extension of the infeed and outfeed of the table extension, Hebrock offers a solution for an enlarged support surface for improved workpiece handling by 450 mm. Level monitoring without reservoir, 1 unit. Thanks to a sensor on the top of the glue application roller, the operator can be shown a minimum glue level. A warning is displayed on the screen. Once this warning appears, a maximum panel processing length of 100 m (19 mm chipboard) is possible. Ball bearing for corner rounding cutter, 24.1 mm, 1 unit Ball bearing for corner rounding cutter, 24.2 mm, 1 unit Packaging surcharge, 1 unit Additional quick-change reservoir incl. level sensor Manufacturer: Hebrock Type: 36/14/1 Article No. H36/14/1, 1.0 unit Additional change motor for corner milling cutter K36 Manufacturer: Hebrock Type: 36/08/2 Article No. H36/08/2, 1.0 unit R1 Location: Supplier

Condition: used, mileage: 21,500 km, power: 100 kW (135.96 HP), color: white, gearing type: automatic, number of seats: 8, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, power assisted steering, - To ensure that you receive the best possible advice, we ask that you schedule an appointment. Mr. Kiel will be happy to assist you. Tel: Gusdjy Uqydopfx Ak Uog CF7 Comfort suspension, CL1 Steering wheel adjustable in inclination and height, CL4 Multifunction steering wheel with trip computer, CU4 Aerodynamics package, E07 Hill start assist, E1D DIGITAL RADIO (DAB), E34 Buffer battery for starting, E57 Electrical system for trailer socket, EA4 Audio 40, ED4 Fleece battery 12 V 92 Ah, EK1 Terminal block for electrical connection, EL8 2-way speakers in the front, F61 Interior mirror, F66 Lockable glove compartment, F68 Heated and electrically adjustable exterior mirrors, FR1 Rear camera not foldable, FR8 Reversing camera, G43 9G-TRONIC, H00 Warm air duct to the passenger compartment, H15 Seat heating for front passenger, H16 Seat heating for driver, H20 Heat-insulating glass all around, HH9 SEMI-AUTOMATICALLY CONTROLLED CLIMATE CONTROL SYSTEM TEMPMATIC, IN3 Wheelbase 3430 mm, long overhang, J55 Seatbelt warning system for front passenger seat, JA1 Warning light for windshield washer fluid level, JF1 Rain sensor, JH3 Communication module (LTE) for digital services, JK3 Instrument cluster with pixel matrix display, JW8 ATTENTION ASSIST, JX2 Service interval 40,000 km, KB6 Main tank 57 liters, LA2 Headlamp assistant, LD9 Interior light(s) in the rear, LE1 Adaptive brake light, LX5 Europe, M60 Generator 14 V / 250 A, MG9 Generator management, MJ8 ECO Start-Stop function, MK8 Speed limitation 210 km/h, MO6 Emission class Euro 6d M/N1 GR. II, MS1 SPEED CONTROL, MU2 OM 654 DE 20 LA 100 kW (136 hp) 3800/min, MX0 BlueEFFICIENCY package, RR6 Spare wheel with jack, S04 Front passenger seat adjustable, SA6 Airbag front passenger, SB1 Comfort driver's seat, SE5 Lumbar support driver's seat, SH1 Thorax-pelvis side airbag driver, SH2 Thorax-pelvis side airbag front passenger, SH9 Window bags for driver and front passenger, T14 Active locking mechanism for sliding door, T70 Child lock on doors in the passenger compartment, T74 Grab handle for entry, T75 Grab handles for entry for driver and front passenger, U63 Seating in the passenger compartment, 3-seater bench, 2nd row, U71 3-seater bench, 1st row with folding outer seat, UR3 Seat arrangement in the rear with quick-release fastening, 2 seat rows, V23 Interior trim, high-quality version, V36 Roof lining, V41 Plastic floor TPO in the passenger compartment, VF4 Fabric Caluma black, VH1 Grab handle in the rear, VV9 Attachment points in the roof frame, W16 Window in front left, fixed in side wall/sliding door, W17 Window in front right, fixed in side wall/sliding door, W29 Window fixed in the rear, W54 Rear doors, double-leaf, opening to side wall, W78 Window in tailgate with windshield wiper and washer system, XM4 Acoustic package We will gladly provide you with an offer for the trade-in of your used vehicle. If you would like to lease or finance your vehicle, we will be happy to provide you with a customized offer. Mr. Kiel will be happy to assist you. IMPORTANT: Viewing only by prior arrangement! All information without guarantee, errors and prior sale reserved! Pictures are for illustration purposes only! Deviations from advertisements or other descriptions are possible, for example, due to errors, incorrect data, transmission errors! ESP, Navigation system, ...

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, Weiler Praktikant 160 B lead and feed screw lathe with 3-axis digital readout K&C NEW Technical data: >> Year of manufacture: 1986, machine number 86-160-348 >> Center height: 160 mm >> Distance between centers: 650 mm >> Spindle speeds: 8 steps; from 96 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: 0.02 to 0.63 mm/rev >> Usable threads: metric, inch, module, and diametral pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight: approx. 680 kg >> Spindle brake switchable >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital readout from K&C, new, 12 months manufacturer warranty with operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, direction reversal >> Collet clamping device, collets as new from 1 to 29 mm in 1 mm increments >> 160 mm new three-jaw chuck with 2 sets of jaws >> Multifix size A with 3 tool holders >> Electric chuck guard >> Bed stop >> Rear wall >> Machine leveling feet >> Coolant device About the machine: Gusdpfxowthbio Ak Usg Offered is a Weiler Praktikant 160 B lead and feed screw lathe built to toolroom precision in very good condition. The machine is, of course, fully functional. The Weiler was completely dismantled and newly painted in light grey. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and can produce surfaces as if ground. Take the opportunity to inspect the machine under power on site and verify its condition for yourself.

Condition: used, For questions regarding the vibratory plate, Mr. Herden (Tel. ...) will be happy to assist you. Weber CR 7 WSA Hatz Diesel Vibratory Plate / Electric Start / New machine / in stock & immediately available Sales price: €9,390.00 net / €11,174.10 gross 3-year manufacturer's warranty Technical Data Engine: Hatz Diesel Maximum engine output: 7.9 (10.7) kW/HP Weight: 484 kg Centrifugal force: 65 kN Frequency: 74 Hz Working width: 65 cm Gujdpfx Akeykhvaj Ujg Weber Smart Assist (WSA) - Processes signals from the machine’s built-in sensors and visualizes them using graphic symbols - Similar to the previous Weber MT engine protection, the engine automatically shuts down if operation would lead to potential engine damage - The user is also shown, via symbols, how to remedy any displayed issues - In the case of an overly dirty air filter, step-by-step instructions guide cleaning and replacement of the filter element - The Weber Smart Assist also includes the COMPATROL compaction control, now presented in a new design - Compaction progress is indicated to the user in a clear, easy-to-read bar graph - The machines now feature push-button activation for vibration once the engine has started - No need for a throttle lever, as the engine self-regulates to the correct speed automatically The reversible soil compactors of the CR series excel with powerful compaction performance and maximum efficiency. They are therefore the first choice for compaction tasks in classical road and civil engineering as well as paving applications. Balanced running characteristics, high operating smoothness, and low hand-arm vibration ensure excellent operator comfort. CR 7 – Economical machine with strong compaction performance: - Infinitely variable forward and reverse travel, hydraulic shift - Throttle cable and hydraulic switch protected within the guiding bar - Low hand-arm vibration - Fatigue-free operation with height-adjustable guide handle - Machine and engine protection via engine guard frame and engine cover - Reduced maintenance thanks to the self-tensioning centrifugal clutch - Easy servicing, as all maintenance points are easily accessible - Safe and quick transport with extra-large, foldable lifting eye - Secure lashing for transport with additional lashing points on the engine console - Greater operator comfort with electric start - Applications: road construction, civil engineering, paving, and—thanks to the low overall height and working width—also optimal for trench shoring applications We have a very large selection of various vibratory plates in stock for immediate delivery! Mr. Herden (Tel. ...) will be happy to assist you. We are happy to provide a financing offer upon request. We are an official Weber MT sales and service partner. We are an official Magni telehandler sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are...

Condition: excellent (used), Year of construction: 2019, operating hours: 100 h, functionality: fully functional, arm reach: 2,890 mm, type of input current: three-phase, load capacity: 6 kg, type of cooling: air, Equipment: cabin, On behalf of a client, we are selling a used Easy Arc 01 welding robot cell from OTC Daihen. The welding robot cell was used to a limited extent for training purposes for vocational school students and future operators of welding robots. In total, the system has approximately 100 operating hours. The system was purchased in November 2019 and put into operation in 2020. It has been idle for 3 years, which is why it is now being sold. Due to the low operating hours spread over the years, the system is still in very good condition, almost like new. The Easy Arc was developed by OTC Daihen as an entry-level solution for welding automation. The highly precise welding robot and the already integrated welding table ensure efficient welding production. The compact design facilitates transportation. In addition, the low assembly effort enables a quick start of production. The Easy Arc 01 consists of the following components: - OTC welding robot, type FD-B6: 6-axis articulated arm robot with a load capacity of 6 kg, including robot controller, type FD-11, and touchscreen control panel - OTC MIG/MAG welding system, type Welbee WB-P400: 400A inverter pulsed welding power source with integrated robot interface - OTC torch, type RT3500H: Robot welding torch (45°) with safety forced stop and 4-roll wire feed system, max. output 350A, gas-cooled, collision protection type B integrated - Siegmund welding table: 2000x1200mm and insertion height 950mm, load capacity 3,200kg, 28mm hole pattern with 100x100mm hole grid for accommodating appropriate clamping technology - OTC safety system: Sturdy safety enclosure including dual-channel monitored material gate and "Robot Monitoring Unit (RMU)". The use of RMU ensures that compliance with the predefined working area of the robot according to Performance Level PLd is guaranteed. The system is CE-compliant (as well as compliant with UVV / VDI / DIN) and can be connected to any standard 32A three-phase power outlet due to an integrated residual current circuit breaker (type B). Further technical data: - Positioning accuracy: +/- 0.08mm - Maximum working area in the P-point: Ø2890mm - Memory capacity of the robot controller, type FD-11: 9999 programs - Communication between the robot controller and the welding system via digital CAN-BUS - Welding power source Welbee WB-P400: Output current range 30-400A, output voltage 12-34V, duty cycle 280A/100%, digital inverter technology with high arc stability over the entire current range Gusdpfx Aozkanaek Ujg The system is delivered including extensive accessories (see picture) for steel and aluminum. In addition, an extraction hood is included in the scope of delivery. The Easy Arc is currently still at the customer's site and is no longer in operation. An inspection may be possible after prior arrangement. Transport must be organized by the buyer; loading will be done on-site. If you have any further questions, please do not hesitate to contact us.

Condition: used, Year of construction: 1965, core drilling diameter max. 50 mm bore depth 2000 mm swing diameter mm drilling capacity diameter max. 110 mm total power requirement 30 kW weight of the machine ca. 10 t Drilling Ø, approx. 2 - 50 mm Boring Ø, approx. 100 mm Drilling depth, max. (see stroke / mounting length) 1,600 - 2,000 mm Stroke of drilling slide, approx. 4,000 mm Distance between the two spindle heads 5,000 mm Height of centres above guideways 350 / 450 mm Drilling feed of drilling slide, infinitely variable 20 - 200 mm/min Quick feed of drilling slide 2,500 mm/min Spindle speeds via belt disks 260 - 650 / 650 - 1,625 rpm Workspindle drive 24 kW Drive of coolant pumps 1 x 7.5/15 kW and 1 x 15/28 kW Total electrical load, approx. 60 kW - 380 V - 50 Hz Total length of machine / guideways 7,500 / 5,000 mm Weight, approx. 10,000 kg Accessories / Special Features * Machine consists of the following elements: Main spindle on the left-hand side, followed by the coolant oil supply device. Table group, driven by ball screw spindle. Coolant oil supply device with elevated height of centres. At the end is a headstock, Type B 16, with Gjdpfx Ajt Hwucsk Ujug drive motor approx. 7.5 kW, n = 900/2400 and 2400/6000. Large coolant device with filter unit. Large selection of accessories and drilling tools with Ø up to 100 mm. * Machine is suitable for working with a rotating workpiece together with a fixed drilling tool (ELB and BTA Process), as well as for a fixed workpiece and a rotating drilling tool. It can work with internal oil feed (Elb) or with external oil feed (BTA). * Complete oil coolant unit with tank and filter and two SIG high pressure pumps. Number of litres can be set: 17 / 40 / 120 or 220 / 500 litres per minute. Capacity approx. 2,500 l. * Feed of main slide is via ball screw spindle and infinitely variable DC motor. Mounted on the main slide is at present a table, approx. 800 x 800 mm, cross-adjustable approx. 500 mm, and suitable for holding cubic and cylindrical workpieces. Electric control via cam rail, approx. 2,500 mm long. End switch for quick feed, feed and return. * 2 closed 3-point steady rests. * FORKHARDT 3-Jaw Chuck, manually operated, Ø approx. 315 mm. * Modernized control panel with speed display, feed setting and display, display for kW, switch for feed, quick feed, right/left, etc. * 2 separate switch cabinets, separate coolant oil display device, bushes, reducers, clamping helps and lots of other accessories. This is a very valuable machine because of all the accessories!

Condition: used, For inquiries regarding the vibratory plate compactor, Mr. Herden will be happy to assist you (by phone at ...). Weber CR 8 WSA Hatz Diesel Vibratory Plate Compactor / Electric Start / New Unit / In Stock & Immediately Available Sales Price: €11,190.00 net / €13,316.10 gross 3-Year Manufacturer’s Warranty Technical Data: - Engine: Hatz Diesel - Max. Engine Output: 10.5 kW (14.3 hp) - Weight: 608 kg - Centrifugal Force: 75 kN - Frequency: 67.5 Hz - Working Width: 70 cm Weber Smart Assist (WSA): - Evaluates signals from the machine’s integrated sensors and displays them graphically via symbols - Similar to the previous Weber MT engine protection system, the engine will shut down whenever continuation could cause engine damage - Symbols also indicate to the operator how to resolve any displayed issues - In the event of a heavily soiled air filter, step-by-step instructions for cleaning and replacing the filter element are provided - Weber Smart Assist also features the newly designed COMPATROL compaction control system - Provides the operator with a clear and easily readable bar graph display of compaction progress - New operating concept: After starting the engine, vibration is activated at the press of a button - There is no throttle lever as the engine automatically adjusts to the correct RPM The reversible soil compactors of the CR series stand out for their powerful compaction performance and maximum efficiency. They are the first choice for compaction work ranging from classic road and civil engineering to paving applications. Balanced running properties, high operating smoothness, and low hand-arm vibrations ensure a high level of operating comfort. CR 8 – Economical Machine with Powerful Compaction: - Infinitely variable forward and reverse travel; hydraulic reversing - Throttle cable and hydraulic reversing system routed and protected within the guide handle - Low hand-arm vibration - Fatigue-free operation with height-adjustable guide handle - Engine and machine protection via protective frame and cover Godpfoyi Rzvex Ak Usug - Lower maintenance requirements thanks to self-adjusting centrifugal clutch - Easy servicing with all maintenance components easily accessible - Safe and quick loading via large, foldable lifting eye - Secure tie-down for transport thanks to additional lashing points on the engine console - Greater operator comfort due to electric start - Areas of application: road and civil engineering, paving work, and, thanks to the low overall height and working width, the CR 8 is also ideal for trench shoring We have a large selection of various vibratory plate compactors in stock and available for immediate delivery! Mr. Herden will be happy to assist you by phone at ... Upon request, we will also be pleased to provide you with a financing offer. We are an official Weber MT sales and service partner. We are an official Magni telehandler sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are...

Condition: used, Year of construction: 1966, turning diameter over bed 330 mm turning dia. in gap 400 mm turning length 600 mm centre distance 750 mm spindle turning speed range 20 - 1000 U/min spindle bore 25 mm 3-jaw chuck Röhm, Ø 200 mm dimensions of the machine ca. 2000 x 800 x 1500 mm weight of the machine ca. 1200 kg Fixed bezel Turning bezel Turning center point Three-jaw chuck Röhm, Ø 200 mm, incl. inner and outer jaws Quick-change tool holder Original Multifix size B with 2 change holders Spindle brake Tailstock quill MK3 Machine feet Lathe chuck guard Chip guard Work light Gusdpfx Akjxrg Atj Uog

Condition: used, Year of construction: 2011, AXES Working area X-Y-Z axes * mm 3050-1300-180 Workpiece length in swivel machining mm 1390 Stroke X-Y-Z axes mm 3460-1735-250 Max. travel speed of the X-Y axes m/min 60 WORKING TABLE Number of workpiece supports and vacuum cups 6 / 2 Standard type Standard End stops / Position 1 / rear Vacuum pump m3/h 90/108 DRILLING UNIT Vertical spindles Std/Number/Speed 1/min 12 (8X-5Y) / 4000 Horizontal spindles Std/Number/Speed 1/min 6 (4X-2Y) / 4000 Integrated slotting/sawing unit in X Ømm/1/min 120 / 6000 Motor power kW (HP) 2.2(3) Gusdpfx Aeyymz Usk Ueg ELECTROSPINDLE Motor power Std. / Opt. (S6) kW (HP) 7.5(10) / 11(15) Max. speed 1/min 24000 Tool changer mounted on the unit carrier in X 4 positions, pneumatic INSTALLATION Installed power KVA 23÷28.5 Compressed air requirement Nl/min 450 Extraction air requirement m3/h 1900+1900 (3400) Required extraction air velocity m/sec 30 Extraction nozzle diameter mm 150+150 (200) Machine weight Kg 3000 * X Distance between the stops - Y Milling center as reference point; Z Workpiece passage GENERAL FEATURES CNC-controlled boring and milling center, in C-frame design and working table with adjustable workpiece supports and vacuum cups, for performing: - Vertical drilling on the surface of the panel - Horizontal drilling on all four sides of the workpiece - Slot milling with disc cutter in "X" direction - General milling operations Self-supporting structure and working table Structure made of a steel welded construction with the control cabinet integrated into the machine frame. Available in two different lengths and with standard workpiece supports or TV supports. Movable unit carrier Box construction made of cold-rolled steel with internal reinforcing ribs, protective devices with bumpers. Working unit Consisting of a drilling head with vertical spindles, horizontal spindles, an integrated slotting and sawing unit and an SCM electrospindle with tool quick-change system type HSK 63 F. Travel paths of the portal and the unit carrier Movement in the X, Y and Z axis takes place on linear prismatic ball-bearing guides with the aid of pre-tensioned linear guides. The power transmission of the X-axis (movable stand) takes place via a pre-tensioned, backlash-free rack and pinion drive with diagonal movement. The movement of the unit carrier in Y and Z direction takes place via pre-tensioned linear guides. The positioning of the working units and the control of the machine functions takes place via "Brushless" three-phase servomotors and digital drives. CNC CONTROL The control unit consists of a numerical control for the milling and drilling machines and a pre-connected personal computer with a graphical user interface "XILOG PLUS". PC -Office- operating system Windows XP - LCD color screen 17 - Qwerty keyboard - Swiveling control panel - Machine interface software Xilog Plus Xilog Plus features Programming - parametric, graphical and ISO programming - Import of DXF and ASCII files - Linear or circular interpolation in three axes, linear in space, spiral in the chosen plane - Supported programming with graphic and syntax aids for drilling and milling operations - Automatic optimization of drilling operations and tool changes - cycles - Possibility of plate zero-point shift for performing drilling on inclined or curved plate sides - Complete compatibility with CAD/CAM Routocam (SCM) - AlphaCam Integrated additional functions - Calculator for direct transfer of the calculated data.

Condition: used, This listing is for 1 of 2 Handilaz Mini Particle Counter The unit is in full working condition and is ready for immediate use Key Features Simultaneous Particle Counting: Sizes and counts particles in three fixed channels (0.3 µm, 0.5 µm, 5.0 µm) High Sensitivity: Detects particles from 0.2 µm to 10 µm, with resolution down to 10 nm Flow Rate: Consistent 0.1 CFM (2.83 L/min) with quiet pump and internal flow control Power Options: Can be powered via direct supply or portable with four high-capacity, quick-change, rechargeable NiMH AA batteries Data Management: Stores up to 10,000 samples Five distinct sampling modes CSV export via USB or SD card Data output through RS-232C or RS-485 Includes data download software Display & Interface: Touchscreen with one-button operation for ease of use Build Quality & Compliance: Guodsxhf Tiopfx Ak Ujg Diode laser light source ISO 21501-4 calibrated Includes IQ/OQ (Installation/Operation Qualification) documentation Extras: Compounding procedure templates provided Applications Cleanroom Certification: ISO 14644-1 certification and re-certification ISO classification for cleanrooms Routine Monitoring: Point-of-use particle measurements Ongoing cleanroom surveillance for compliance Contamination Troubleshooting: Locating local particle sources Verifying filter performance Filter & Leak Testing: Efficient detection of filter leaks and performance validation Compounding: Suitable for pharmaceutical or sterile compounding operations using pre-designed templates

Condition: excellent (used), Year of construction: 2022, Available immediately. Behringer LPS 60 TA, manufactured in 2022, in excellent condition. This is a very special band saw; it operates fully automatically! - Auto feed control with cut monitoring - Saw band drive 5.5 KW - 10-120 M/min - 54 mm band - Clamping device for saw sections - Line laser Advantages of the LPS-TA table band saw Unsurpassed precision and cutting performance High cutting accuracy, smooth running, and long band life are due to the special, torsion-resistant design of the saw frame. Unique feature: the force transmission of the saw feed is located directly below the cutting point. Advantages in material procurement By producing flat materials from large sheets, efficiency gains can be achieved in both storage and the purchase of raw materials. Clamping device for layered cuts (option) For sawing larger batch sizes, sheets can be stacked in layers and securely held in place using the optional vertical additional clamping device. Chip conveyor as standard Below the saw unit, directly in the direction of chip flow, there is a large-sized chip conveyor with an integrated coolant tank. Chips and coolant are collected and separated in this tank. For cleaning and maintenance work, the conveyor can be extended out of the machine frame. Powered duplex chip brushes effectively clean the saw band, thereby increasing tool life. The brushes are automatically adjusted to the saw band and ensure consistent cleaning performance. Automatic feed device Through the combination of an NC-controlled feed device and intelligent control, sheets can be separated into strips fully automatically. Servo feed system The use of the Behringer servo feed system creates a constant chip removal rate and utilizes the performance of modern saw bands more effectively. The rapid response of the servo feed system to the sensors of the cutting pressure control consistently prevents overloading and premature wear of the saw bands. Gujdpfxszubxhs Ak Usg Quick saw band change ensures the shortest possible setup times. In just two to three steps, the saw band can be moved to the change position. Band-guiding parts made of gray cast iron are made by Behringer and ensure vibration damping directly at the cutting point, thereby increasing tool life. Compact Due to its compact dimensions, the table band saw can be installed even in confined spaces. Movable material support table For easy loading and unloading by crane, the material table can be extended out from under the saw unit.

Condition: used, For inquiries regarding the vibratory plate, Mr. Herden will be happy to assist you (by phone at ...). WEBER CR 6 MDM Hatz Diesel Vibratory Plate Compactor / New machine / In stock & immediately available Sale price: €8,490.00 net / €10,103.10 gross 3-year warranty Shipping possible. The reversible soil compactors of the CR series impress with powerful compaction performance and maximum efficiency. They are the first choice for compaction work ranging from classical road and civil engineering to paving applications. Balanced running characteristics, a high level of smoothness, and low hand-arm vibration ensure superior operator comfort. CR 6 – Economical machine with high compaction performance: - Infinitely variable forward and reverse travel, hydraulic changeover - Throttle cable and hydraulic changeover routed securely within the guide bar - Low hand-arm vibrations - Fatigue-free operation thanks to the height-adjustable guide handle - Protection of machine and engine through engine guard frame and engine cover - Reduced maintenance due to self-tensioning centrifugal clutch - Easy servicing, as all maintenance components are easily accessible - Safe and quick loading thanks to large, foldable lifting eye - Secure lashing for transport via additional lashing points in the engine console - Increased operator comfort with electric start - Areas of application: road and civil engineering, paving construction, and thanks to the low height and working width, the CR 6 is also ideal for trench shoring Technical data: Engine: Hatz diesel Engine power max.: 7.5 (10.3) kW/hp Godeymv Sbepfx Ak Ujug Weight: 414 kg Centrifugal force: 55 kN Frequency: 72 Hz Working width: 59 cm We are happy to provide you with a financing offer upon request. We are an official sales and service partner for Westtech, Gierking GMT, OilQuick, Weber MT, Holp, DMS, Seppi M., Magni telehandlers, JCB construction machinery, Mercedes-Benz, and Iveco. Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Weber MT range for you! Errors and prior sale excepted. = Further information = New: Yes Engine make: Hatz Contact Marius Herden for further information.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2025-09/2404095, turning diameter over cross slide: 224 mm, spindle bore: 51 mm, center height: 180 mm, quill diameter: 32 mm, quill travel distance: 100 mm, total length: 1,680 mm, total height: 1,400 mm, TECHNICAL DATA: Centre distance: 1000 mm Centre height: 180 mm Swing diameter over bed: 360 mm Swing diameter over cross slide: 224 mm Swing diameter without gap bridge: 502 mm Gap bridge length: 235 mm Cross slide travel: 170 mm Top slide travel: 95 mm Max. turning tool cross section: 16x16 mm Chuck mounting: D1 - 4 Spindle mounting (lathe spindle): MT 6 Spindle bore: 51 mm Spindle speed: 70 - 2000 rpm Number of speed ranges: 8 Longitudinal feeds: (32) 0.052 - 0.392 mm/rev Cross feeds: (32) 0.014 - 0.380 mm/rev Metric thread pitch: (26) 0.4 - 7 mm Metric module threads: (26) 0.4 - 7 mm Inch threads, TPI: (34) 4 - 56 TPI Inch module threads, TPI: (34) 4 - 56 TPI Leadscrew pitch: 4 mm Leadscrew diameter: 32 mm Quill mounting: MT 3 Quill diameter: 32 mm Quill travel: 100 mm Motor power: 1500 W Coolant pump: 40 W Electrical connection: 400/50 V/Hz Total length: 1680 mm Total height: 1400 mm Weight: 520 kg Standard accessories: - RÖHM 3-jaw chuck Ø 200 mm Gedpfxoxykafs Ak Ujug - 4-jaw faceplate chuck Ø 200 mm - Face plate Ø 320 mm - 2 fixed centre points - Live centre MT 3 - Travelling steady - Fixed steady - Quick-change tool post set ME - Thread dial and change gear set - Halogen machine lamp - Emergency stop button / No-voltage release - Chuck guard with safety switch - Machine base / chip tray / splash guard - Tool kit / operating manual / CE

Condition: used, Year of construction: 2006, KEG system, manufacturer Lang, type: Variomat 1+1, for 30 KEGs/h, with 1 internal cleaning station and 1 filling station, with 1 detergent container for hot caustic solution, steam-heated, suitable for stainless steel KEGs and PET KEGs. Guedpfoyzfuvox Ak Ujg

Condition: refurbished (used), functionality: fully functional, Year of construction: 2023, input voltage: 400 V, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, Manufacturer: Rausch (Haan/ Rhld) Model: RS 4/1000 Machine No.: 5027 Year of manufacture: 2001/2023 Weight: 580 kg Overhauled: 3/2023 by Wiemers AG General / Technical Data: Unused, overhauled mechanical vertical broaching machine Rausch RS 4, with current “CE” certification Pulling force: 40 kN (4,000 kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table dimensions / Working area: 540 x 340 mm / 450 x 250 mm Table opening: Ø 90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,350 mm x 900 mm x 1,000 mm (with splash-guard cabin) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Accessories / Special equipment: - Drive with 2 speeds - Safety door with interlock and chip chute - Chip chute with tool storage - Electric clamp jaw sensing (tool removal monitoring to prevent unintentional retraction of the drawbridge) - Integrated coolant system with solenoid valve (controlled via swing system) - Patented coolant/lubricant swiveling system - Externally adjustable tool length setting system (reproducible across multiple machines) Gusdsw H Dgnjpfx Ak Uog - 4 central lubrication points for the trapezoidal spindle drive - Closed centering plate for profile tools with additional protection plate for flat broaching tools (keyway tools) - 3-sided enclosed splash guard cabin with tool storage (ideal for profile broaching) - External control panel (connected via Harting plug connector) Remarks: The machine has been completely overhauled, the machine body thoroughly reconditioned. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made from cast, wear-resistant bronze - All bearings and seals replaced The coolant system (pump, check valve, and drain valve) including coolant/lubricant swing system is new - Coolant supply is controlled via a solenoid valve, which can be switched over by the swing system - The drawbridge as well as the clamping jaws and rack segments are new - A deactivatable clamping jaw detection system has been installed (additional safety for operator & to prevent tool breakage) - A safety door with interlock, signal display, and door lock - The tool length adjustment system has been relocated outside the machine compartment - Additional end-position limit switches have been installed - Complete new electrical system (control cabinet) - No PLC installed, machine is electrically maintenance-friendly - New drive motor (SEW Germany) with brake - The machine has been freshly painted with 2-component structural paint General The dual spindle drive ensures smooth, centralized pulling force and consistent broaching speed (broaching speed selectable: 3 m/min or 6 m/min). By design, the machine is quick and simple to set up for broaching with flat broaching tools for keyway cutting. Thanks to the universally constructed design of the drawbridge and machine table, operation with both profile and flat broaching tools is possible without the need for additional drawheads.

Condition: used, Year of construction: 2018, operating hours: 10,735 h, Caterpillar MH3024 material handler, year of manufacture: 2018, operating hours: 10,735h, elevating cab, central lubrication system, rearview camera, 4-point outriggers, German machine, single owner, immediately available for operation. Attachment: Sorting grab = €5,000 net Godpfxsyfr E Uo Ak Ujug Upon request, we can provide a leasing or financing offer. Mr. Mihm (Tel.) will be happy to assist you. For more information, please visit our website. Subject to prior sale and errors. ZSA, quick coupler system, rental possible = Further Information = Drive: Wheeled Please contact Tobias Ebert for more details.

Condition: excellent (used), Year of construction: 2021, operating hours: 8,000 h, functionality: fully functional, turning diameter: 380 mm, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 234 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 625 mm, mount diameter: 40 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 21 m/min, rapid traverse Z-axis: 33 m/min, rotational speed (max.): 5,000 rpm, torque: 465 Nm, bar passage: 65 mm, workpiece weight (max.): 300 kg, total height: 1,857 mm, total length: 2,760 mm, chuck outer diameter: 203 mm, total width: 1,835 mm, bar diameter (max.): 65 mm, swing diameter over bed slide: 695 mm, overall weight: 5,600 kg, Equipment: chip conveyor, fume extraction, CNC lathe MAZAK Quick Turn 200MY (year of manufacture 2021) You are welcome to inspect the machine while it is powered on at our facility. If you are interested, we will send you demonstration videos of the machine. The MAZAK Quick Turn 200MY is a powerful CNC lathe for the precise and efficient machining of chucked parts in a universal application (500U). With a maximum swing diameter of approximately 695 mm and a maximum machining diameter of approximately 380 mm, the machine is particularly suitable for demanding turning operations in general mechanical engineering as well as in series and single-part production. The robust design with travels of 234 mm in the X-axis and 625 mm in the Z-axis, as well as a bar capacity of approximately 65 mm, enables the flexible accommodation of a wide variety of workpiece geometries – with a maximum payload in chucking operations of 300 kg and a maximum loading weight of 500 kg. The powerful main spindle with an 8″ chuck size and up to 5,000 rpm ensures high cutting performance and precision. Gjdpfxszkbfge Ak Ujug The machine is equipped with a modern MAZATROL SmoothG control system, which offers intuitive operation, fast programming, and high process reliability. The 16-tool turret (VDI 40, quick-change function) enables flexible and efficient machining processes, even for complex manufacturing tasks. The tailstock (MT No. 5, 550 mm travel) provides additional secure support for long workpieces. For further process reliability and automation, the machine has an automation package (part catcher as well as interface/connection option for robots and bar feeders). An LLS coolant mist extraction system (low maintenance costs) and a chip conveyor from Mayfran also ensure optimal production conditions. With a machine weight of approximately 5,600 kg, the Quick Turn 200MY offers high stability and vibration damping, which has a positive effect on surface quality and dimensional accuracy. Overall, it is a modern and versatile CNC lathe that guarantees high precision, performance, and reliability in industrial production. On request, we offer delivery as well as commissioning of the machine in a comprehensive, worry-free package. You are in the best hands with us – professional, reliable, and with a passion for machines! PS CNC Service Germany GmbH & Co. KG All information is subject to change without notice.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, workpiece weight (max.): 500 kg, total height: 2,750 mm, total width: 1,200 mm, total length: 1,400 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 600 mm, overall weight: 1,800 kg, input voltage: 230 V, table width: 700 mm, table height: 600 mm, table length: 1,000 mm, year of last overhaul: 2026, maximum load weight: 500 kg, Equipment: documentation/manual, Nikon LKV 10.7.6 – complete 3D measuring system with scanner and probe For sale: Nikon LKV 10.7.6 in very good condition, complete with a Nikon LC15Dx 3D laser scanner and a Renishaw TP200 probe system. Gsdpezvyrcofx Ak Ueug The combination of scanning and probing makes this measuring machine very versatile. The LC15Dx scanner is ideal for quickly and digitally capturing complex shapes and surfaces. This allows large amounts of measurement points to be collected in a short time, enabling efficient mapping of shape, contours, and deviations. The TP200 probe is suitable for highly accurate contact measurements, for example, of holes, surfaces, edges, and other geometric features. This allows both freeform shapes and critical dimensions to be accurately checked. With PolyWorks software, this machine is very easy and quick to program, so that measurements from both the probe and the scanner can be performed together in one program and included in the same report. The machine is offered complete, including: New PolyWorks|Inspector license High-end workstation computer Complete installation and configuration with calibration according to ISO-10360 Training and explanation Delivered ready for use A complete solution for 3D inspection, dimensional control, and quality control, allowing you to both scan quickly and probe with high precision. The machine is in very good condition and can be viewed and demonstrated by appointment. You are welcome to come and see the machine and discuss its capabilities. Please feel free to contact us for more information or to schedule an appointment.

Condition: ready for operation (used), Year of construction: 2014, spindle speed (max.): 3,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,500 mm, spindle motor power: 20,000 W, total height: 1,900 mm, total width: 2,100 mm, overall weight: 3,500 kg, controller manufacturer: HEIDENHAIN, controller model: MANUAL plus 620, product length (max.): 3,300 mm, number of axes: 3, Horizontal turning machine manufactured in 2014. This SEIGER SLZ 500E features a center distance of 1500 mm and a swing diameter over the bed of 500 mm. It is equipped with a powerful main drive of 20/25 kW and a maximum spindle torque of approximately 1400 Nm. If you are looking to get high-quality turning capabilities, consider the SEIGER SLZ 500E machine we have for sale. Contact us for further details regarding this machine. - Spindle Speed: 1 - 3,000 RPM (Stage 1: 1 - 750 RPM, Stage 2: 1 - 3,000 RPM)- Spindle Power (100/60% ED): 20 / 25 kW- Taper Size: DIN 55027 Size 8 (Main Spindle Nose) / MT 5 (Tailstock Quill)- Tool Stations: 8-station Sauter disc turret + Parat 4-way quick-change holder Size 3- Through-Spindle Coolant: No- Counter Spindle: No- Max. Bar Diameter: 78 mm (through Schunk chuck) / 93 mm (spindle bore)- Max. Workpiece Diameter: 500 mm (swing over bed) / 280 mm (swing over cross slide)- Max. Tool Weight: No info- Driven Tools: Yes (Sauter 8-station disc turret for driven tools, VDI shaft D=30 mm with digital servo motor)- Positioning Accuracy: According to DIN 8605- X-axis Travel: 260 mm- Z-axis Travel: 1500 mm (center distance)- C-axis Specification: Pneumatically engaging with digital motor and gear drive on main spindle (Spindle speed up to 15 rpm, Torque ca. 420 Nm)- Bed Width: 350 mm- Turning Tool Cross Section (H x W): 25 x 25 mm- Spindle Diameter in Front Bearing: 130 mm- Inner Taper of Main Spindle: Metric 100- Maximum Spindle Torque: approx. 1400 Nm- Feed Force Z-axis: 10,000 N- Feed Force X-axis: 7,000 N- Feed Range (Longitudinal/Planar): mm/rev- Rapid Traverse Speed X/Z: 10 / 7 m/min- Tailstock Quill Diameter: 90 mm- Tailstock Quill Stroke: 180 mm- Max Workpiece Weight (Between Centers): 1,000 kg (1,250 kg with steady rest)- Max Workpiece Weight (Flying in Chuck): 300 kg (at 200 mm center of gravity distance)- Operating Voltage: 400 V / 50 Hz- Control Voltage: 24 V DC- Connected Load: 41 KVA- Current Rating: 60 A- Main Fuse: 63 A - Additional Equipment: - Chip protection wall, 2 movable sliding safety doors with windows, machine light, Quick-change tool holder size C, coolant device, live center MT 5, operator tool set, linear scale in X-axis, safety clutch in X and Z axes- Chip Conveyor: discharge height 1000 mm, length 535 mm, 60-degree gradient, continuous feed, ca. 250 dm³/h capacity, speed ca. 2 m/min- Two-speed Planetary Gearbox: Item 6054375, automatically shifting, flanged on main spindle motor- Parat 4-Way Turret Quick-Change Holder: Size 3, manually operated, mounted on zero-point clamping system- Sauter 8-Station Disc Turret for Driven Tools: VDI shaft D=30 mm with digital servo motor, mounted behind turning center- Boring Block: with VDI 50 retainer and internal coolant supply, mounted on zero-point clamping system in front of turning center- Zero-Point Clamping System: base part mounted on cross slide- Hydraulic Hollow Clamping Unit: Schunk ROTA THW plus D=315 mm 3-jaw chuck with DIN 55027 Size 8 mount and 78 mm bore passage- Reinforced Coolant Pump: (2.5 bar at 40 L/min, max 5. Gusdpfx Aezvx Agek Ujg