Used Karl Kremsmüller/Engelbert Compressed Air Tank for sale (30,344)

Condition: used, Screw compressor WORTHINGTON - CREYSSENSAC Type Rollair 40 -- RLR 40BM6 Serial no. 6240330200 Year of construction 2003 Volume flow 4.6 m3/min. Pressure capacity 10 bar Motor power main motor 30 kW Mains connection 400 Volt, 50 Hz Connection thread 1 1/2 inch Laedpfofmim Ujx Ancea - 36004 Switch-on hours read - 19256 Load hours read - Soundproofed Space requirement L x W x H 1850 x 1050 x 1760 mm Weight 910 kg good condition

Condition: used, Compressed Air Dryer PARKER HIROSS for Compressor Systems Lodpfxjdzqn Uj Ancsaa Mechanical Condensate Separator, Water Separator Refrigeration Dryer with water-cooled aftercooler for removal of water vapor and cooling of compressed air or gases. 1 unit Aftercooler Type WFN009 DHH16 Air flow rate (standard): 540 m3/h = 9,000 liters/min. Operating pressure (air): max. 16 bar Housing length: 1,020 mm Housing diameter: Ø 105 mm Threaded air connection: G 2" Threaded water connection: G 3/4" Weight of aftercooler: 11 kg Dimensions of aftercooler (L x W x H): 1,030 x 850 x 200 mm + 1 unit Water Separator Type CSP 008 Standard flow rate: 480 m3/h = 8,000 liters/min. Operating pressure: max. 16 bar Threaded connection: G 2" - Filter housing made of aluminum + 1 unit Mechanical Condensate Separator HIROSS SAC 120 Threaded connections: R 1/2" Operating pressure: 16 bar Volume: 0.8 liters - operates without compressed air loss All components assembled as shown in the photos Mounted height (upright): 2,000 mm Total weight approx. 40 kg 2 identical units available

Condition: used, Pneumatic press, compressed air press BOSCH type Manufacturer no.: Year of manufacture: 1980 Pressing force: 18 kN = 1.8 t at 5 bar 15 kN = 1.5 t at 4 bar 12 kN = 1.2 t at 3 bar 8 kN = 0.8 t at 2 bar 6 kN = 0.6 t at 1.8 bar Throat depth: 100 mm Ram stroke: 70 mm Table size: 245 x 200 mm Ram face: Ø 45 mm Max. installation height: 235 mm Clamping pin bore: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force infinitely adjustable via pressure regulator Ledpfxoh U Dtus Ancjaa - Pneumatic cylinder with ram adjustable in height by 90 mm - Pneumatic dual-hand control - Mounted on a metal frame with wooden boards Required floor space (L x W x H): 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight including table frame: 140 kg In very good condition

Condition: used, Piston Compressor KAESER Type EPC 630-250 Serial No.: 1802334 Year of manufacture: 1992 Free air delivery at 6 bar: 440 liters/min. Maximum intake capacity: 630 liters/min. Output pressure: 10 bar Tank capacity: 250 liters Motor power: 3 kW Laodpfx Anjwypqrscsa Connection: 400 Volt, 50 Hz (with 16 Amp plug) - 2-cylinder, oil-lubricated - Pressure switch set to 10 bar - Run time from 0 bar to switch-off pressure of 10 bar = 5 min Space required (L x W x H): 750 x 700 x 1750 mm Weight: approx. 150 kg In good condition

Condition: used, Screw compressor KAESER type BS 50 Serial no.: 402852 Year of manufacture: 1990 Volume flow: 5 m³/min. Operating pressure: 7.5 bar Main motor power: 30 kW Electrical connection: 400 Volt, 50 Hz Connection thread: 1 1/2" inch - 1107.90 hours of operation read - 749.00 load hours read Lodpfxoiyu Ife Ancsaa - Sound-insulated Dimensions (L x W x H): 1600 x 1070 x 1350 mm Weight: 900 kg Very good condition Was a reserve compressor and has only few operating hours.

Condition: used, Filter fitting, filter unit COMPAIR for compressor units Laodpfx Anohalvdjcsa Compressed air filter Type: CF 0087B ZP Factory No.: 3363006 / 05 / 005 Operating pressure: max. 16 bar Thread connection: G 1 1/2" Flow rate: approx. 8,5 m³/min Filter element- No: CE 0087B - Filter housing made of aluminum weight: 5 kg dimension L x W x H 125 x 110 x 420 mm good condition

Condition: used, functionality: fully functional, W-KRONEN HP10 LT500 Compressed Air Compressor with integrated Aerotec Refrigerated Compressed Air Dryer Aerodry PRO 1000 The W-Kronen HP10 LT500 is a powerful and reliable air compressor designed for demanding applications in trade, industry, and workshops. In combination with the integrated refrigerated compressed air dryer, this system provides a compact, efficient, and ready-to-use complete solution for producing high-quality compressed air. Laedpfx Anoyrpnascsa Technical specifications: - Tank size: 500 L - Tank pressure: 10 bar - Intake capacity: 1100 L/min - Delivery rate: 950 L/min - Speed: 1200 rpm - Sound pressure level LWA/dB: 97/78 - Motor kW/hp: 7.5 / 10 - Voltage/Hz: 400 V / 50 Hz, 16A plug

Condition: good (used), Year of construction: 2015, MANUFACTURER: KAESER MODEL: TF174 Laodpoyn Egkofx Ancea SERIAL NO.: 1216 YEAR: 2015/08 POWER (kW): 2.52 CAPACITY (m³/min): 17 PRESSURE (bar): 16

Condition: used, New compressed air refrigeration dryer, unused compressed air dryer from stock Compressed air dehumidifier SMC type IDFA3E-23 Compressed air dryer, compressed air dehumidifier Serial No.: PP0213S Year of manufacture: 2011 SMC compressed air dryer IDFA size 3E Flow rate per hour: 12,000 liters/h (12 m³/h) Flow rate per minute: 200 liters/min. Operating pressure max. 10 bar Operating pressure: 0.15 to 1.0 MPa (manufacturer's specification) Refrigerant: R134a Temperature range: 5°C to 50°C Power consumption: 180 watts Power supply: 230 volts, 50 Hz, 1.2 amps Connection pipe thread: 3/8" - Stainless steel heat exchanger, air-cooled condenser - Condensate separator with automatic drain Ljdpfx Anjyif I Uocsaa - Condensate drainage via hose Space required (L x W x H): 410 x 226 x 473 mm Weight: 18 kg New, unused, in mint condition from stock

Condition: excellent (used), Year of construction: 2010, Ingersoll Rand TMS 80 Refrigerant Dryer Capacity: 8.2 m3/min Year of manufacture: 2010 Ledpfjymmbtsx Anceaa The dryer is fully operational.

Year of construction: 2026, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture is fed to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1 1/2" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 7000 l/min Lasdpfxsmt Dcxs Ancoa Power 1.37 kW Power supply voltage 230 V Dimensions (L x W x H) 1000 x 550 x 920 mm Weight 95 kg Type and amount of refrigerant R410a, 900 g

Condition: new, Compressed air strip nailer 6512/130 SQ for nails up to 130 mm long Applications: Carpentry, roofing, packaging, interior finishing, prefabricated house construction, timber formwork, battens, crate and pallet construction, fence construction, load securing, etc. - Single release - For paper-loaded safety strip nails - Eurocode 5 nails in accordance with DIN EN 14592 - User-friendly driving depth adjustment - Robust and powerful - Optimally silenced and balanced Technical data: - Release type Single release - Air consumption per driving operation 5.40 liters - Nail lengths from 90 to 130 mm - Nail diameter 3.4 - 4.2 mm - Nail series 34° safety strip nails - Magazine capacity 75 nails Laedpfx Aevcl Slencsa - Weight 6.60 kg - Length x width x height 470 x 150 x 460 mm The nailer is new and unused. Only traces of storage may be present, as the device was hanging in our showroom. You will receive an invoice with VAT shown. Payment: Prepayment by bank transfer - NO PAYPAL! If you have any questions, please do not hesitate to contact us.

Condition: new, Year of construction: 2026, functionality: fully functional, Set containing LUFT 1000 screw compressor, N10S refrigeration air dryer and compressed air tank with a capacity of 500l. The screw compressor of the Polish brand CORMAK, the LUFT series, is the most modern solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high efficiency of the device guarantee effective and trouble-free operation. Additional double filtration on the dehumidifier! KIT INCLUDES: LUFT 1000 COMPRESSOR REFRIGERATION AIR DRYER N10S 500L TANK Technical parameters LUFT 1000 COMPACT Compressor Engine power 7.5kW Lsdpfxerh E Dqj Ancsaa Dehumidifier Engine power 0.29kW General parameters Capacity at 6 bar 750 lpm Capacity at 8 bar 700L/min Capacity at 10 bar 670 lpm Outlet G3/4" Overall dimensions 1320x650x945 mm Weight 500 kg The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Year of construction: 2026, condition: new, functionality: fully functional, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger Lajdpfx Anemt Dcqjcja In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture goes to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1 1/2" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 3800 l/min Power 0.9 kW Supply voltage 230 V Dimensions (L x W x H) 850 x 480 x 480 mm Weight 59 kg Type and amount of refrigerant R410a, 650 g

Condition: new, Year of construction: 2026, Set containing LUFT 1000 screw compressor, N10S refrigeration air dryer and compressed air tank with a capacity of 270l. The screw compressor of the Polish brand CORMAK, the LUFT series, is the most modern solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high efficiency of the device guarantee effective and trouble-free operation. Additional double filtration on the dehumidifier! KIT INCLUDES: LUFT 1000 COMPRESSOR REFRIGERATION AIR DRYER N10S 270L TANK Technical parameters LUFT 1000 COMPACT Compressor Engine power 7.5kW Dehumidifier Engine power 0.29kW General parameters Capacity at 6 bar 750 lpm Lsdpfomqlprox Ancoaa Capacity at 8 bar 700L/min Capacity at 10 bar 670 lpm Outlet G3/4" Overall dimensions 1320x650x945 mm Weight 500 kg The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Year of construction: 2026, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture is fed to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 1500 l/min Laodpfxomt Dbhe Ancea Power 0.58 kW Supply voltage 230 V Dimensions (L x W x H) 380 x 600 x 625 mm Weight 31 kg Type and amount of refrigerant R134a, 400 g The price given is a NET price. The price does not include transport costs. For more information, please contact us by phone or email. We invite you to familiarize yourself with the offer on our website.

Year of construction: 2026, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture goes to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1" Lajdpfx Ajmt Dcfencoa Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 2800 l/min Power 0.58 kW Supply voltage 230 V Dimensions (L x W x H) 420 x 700 x 690 mm Weight 37 kg Type and amount of refrigerant R134a, 550 g

Condition: new, Year of construction: 2026, functionality: fully functional, Set containing LUFT 700 screw compressor, N10S refrigeration air dryer and compressed air tank with a capacity of 500l. The screw compressor of the Polish brand CORMAK, the LUFT series, is the most modern solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high efficiency of the device guarantee effective and trouble-free operation. Additional double filtration on the dehumidifier! KIT INCLUDES: LUFT 700 COMPRESSOR Lajdpfx Anorh E Erocea REFRIGERATION AIR DRYER N10S 500L TANK Technical parameters LUFT 700 COMPACT Compressor Engine power 5.5kW Dehumidifier Engine power 0.29kW General parameters Capacity at 0-6 bar 680 lpm Capacity at 6 bar 650L/min Capacity at 8 bar 650 lpm Capacity at 10 bar 620 lpm Outlet G3/4" Overall dimensions 1250 x 600 x 895 mm Weight 380 kg The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: excellent (used), MANUFACTURER: ALUP MODEL: ADQ2700 SERIAL NO.: 07M011498 YEAR: 2007 POWER (kW): 8.7 CAPACITY (m3/min): 45 Laedpeykvphsfx Ancsa PRESSURE (bar): 12 HOURS (DOCUMENTED/TOTAL):

Condition: excellent (used), Year of construction: 2015, MANUFACTURER: DRYTEC MODEL: SD1800 SERIAL NO.: 3414MA12150 YEAR: 2015 POWER (kW): 3.14 CAPACITY (m3/min): 30 PRESSURE (bar): 16 OPERATING HOURS (DOC/TOTAL): FREQUENCY INVERTER: Ledpfoykvmtox Ancjaa BUILT-IN DRYER: R134a, 7kg

Condition: excellent (used), Year of construction: 2011, PROD. BRAND Ljdpfxeykvk Es Ancsaa MODEL MDX6500 S/N CAI492661 YEAR 2011 POWER (kW) 1.64 CAPACITY (m3/min) 6.5 PRESSURE (bar) 13 HOURS (DOC/TOTAL) FREQUENCY INVERTER BUILT-IN DRYER yes R404a 1.35kg

Condition: used, Year of construction: 2010, Operating hours: 58,730 h Laodpeydlycjfx Ancoa Technical data: Max. compressed air pressure: 14 bar Ambient temperature, max.: 50°C Refrigerant: R410A, 0.86 kg Connection: 230 V Weight, approx.: 154 kg

Condition: good (used), Mäder DLP 1700 HV Direct-acting compressed air press Press Direct-acting compressed air presses are used wherever the compressive force is required constantly over a longer distance or where a large immersion depth is required: e.g. when pressing in pins, bushings and ball bearings or when deforming. Lajdpfxsd Tam Nj Ancsa DLP 1700 HV Direct acting compressed air press Pressure force at 6 bar: 17 kN Working stroke: H mm: 40/60/80 More articles - new and used - can be found in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2011, MANUFACTURER: HANKINSON MODEL: HHDP2700 SERIAL NUMBER: 4001011004 Laodpsyh Uvxjfx Ancsa YEAR: 2011 POWER (kW): 7 CAPACITY (m³/min): 45 PRESSURE (bar): 16

Condition: excellent (used), MANUF. AGT TYPE VD8/18C PY S/N 7D8-02741 YEAR n/a POWER (kW) 7 Lasdpeyh Uq Nofx Ancja OUTPUT (m³/min) 30 PRESSURE (bar) 16 HOURS (DOC/TOTAL) FREQUENCY INVERTER BUILT-IN DRYER R404a