Used Inox Behälter Gmbh Ebb90Rwp for sale (70,057)

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376295, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376295 Year of manufacture: 2020 Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total pressure increase: 2500 daPa Operating-point total pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Bwsdpszw Ug Rjfx Albst Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376292, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Bwjdpfx Aozw Ucxslbst Serial number: 376292 Year of manufacture: 2020 Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total-pressure increase: 2500 daPa Operating-point total-pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Condition: used, Year of construction: 1985, Pressurised tank cellar with three upright stainless steel pressure tanks of 207 hl each and with double-seat valve solution on the operating level. All tanks can be cooled. Additional title: 3 pressure tanks Volume per tank: 20700 l Effective cooling surface: 18 m² Max. working overpressure inner tank: 4 bar Length: 2,10 m Width: 2,10 m Bjdpfx Aow Tmqnjlbswt Height: 6,66 m Weight: 1985 kg Material: stainless steel AISI 304 Features: Tank cleaning equipment with spray head, safety valve, pressure gauge, air valve combination; sampler, level indicator with valves, outlet valve, Printed tank books and drawings available Periphery: Inlet & outlet pipework via double-seat valves

Year of construction: 1988, condition: used, Cylindro-conical 965 hl fermentation and storage tank. - coolable, 1 x cone cooling jacket, 3 x side wall cooling jacket - swivel cone - stainless steel - insulated - short supporting skirt - deaeration and cleaning combination with safety valve - vacuum valve 12 tanks, also available individually or in partial quantities. Additional title: Outdoor tanks for storing fluids; years of manufacture 1988-1991 Capacity: 96450 l Operating pressure: 2 bar Length: approx. 12400 mm Width: approx. 3950 mm Height: approx. 3950 mm Weight: 6220 kg Material: Stainless steel 1.4301 Position: vertical Base construction: short supporting skirt Features: 12 tanks; Cooling: 1 x cone cooling jacket, 3 x side wall cooling jacket; swivel cone; insulation; dearation and cleaning combination; safety valve; vacuum valve; temperature measurement Bodpfovcqnlex Albjwt

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 3,500 l, Equipment: documentation/manual, BRINOX 3,500 L Batch Tank – 1.4435 – Double Jacket – PED Module G – TÜV SÜD – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Type: SVMBHI-3500 Tag No.: BH6770-BH1001 Serial number: 1003460 Year of manufacture: 2020 Condition: As new / unused BH6770-BH1001 Package 28 TECHNICAL DATA Product type: Batch tank / pressure vessel Working volume: 3,500 liters Total volume: 4,304 liters Jacket volume: 202 liters Bwodpfxsylng Uo Albst Empty weight: 1,958 kg Product contact material: 1.4435 Jacket: 1.4404 CE marking: CE 0036 Permissible vessel pressure PS: -1 / +3 bar Test pressure vessel PT: 5.6 bar Permissible jacket pressure PS: -1 / +6 bar Test pressure jacket PT: 10.8 bar Permissible temperature TS: -10 °C to +150 °C Fluid group: 2 Design according to AD 2000 code Pressure vessel according to PED 2014/68/EU Category III Module G – Individual inspection Notified body: TÜV SÜD Industrie Service GmbH (ID number 0036) TÜV approval including final inspection and pressure test, fully documented. FAT – Factory Acceptance Test The vessel was fully FAT tested and approved at the factory. Tests carried out, among others: • Pressure test per PED • Visual inspection of all weld seams • Non-destructive tests (RT, PT according to test plan) • Dimensional and drawing comparison (as-built) • Internal surface roughness measurement (Ra ≤ 0.8 µm) • Calibration test of manometers • Marking verification • Complete documentation review Full FAT protocols available. DESIGN • Cylindrical, horizontal vessel • Double jacket with half-pipe system • Internally electropolished and passivated • High-gloss product contact surface • Pharmaceutical-grade welds • Manway DN 500 • Powder/product inlet DN 300 • CIP connections • Safety valve • Pressure and temperature connections • Agitator connection • Heavy-duty trunnion supports • Lifting lugs DOCUMENTATION – complete and structured Extensive project-specific quality and manufacturing documentation available, including: • EU Declaration of Conformity and guarantee certificates • TÜV certificate with acceptance report (Module G) • TÜV design review and certification • Material certificates 3.1 • Welder lists and welding procedure qualification records (WPQR/WPS) • Non-destructive test reports (RT, PT, etc.) • Analysis certificates for welding filler materials and gas • Company qualification certificate • Roughness protocol • Surface treatment report • Dimensional accuracy test report • Internal pressure test report • Calibration certificates • Reports and EU conformity of installed components • Parts list compilation • Detail drawings • Operating and maintenance manuals Complete digital documentation package available. CONDITION • Never used in production • Stock item • Interior surface absolutely as new • No corrosion • No signs of use • Industrial new condition • Immediately available SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Sterile liquid processes • GMP production plants • Biotechnological applications SPECIAL FEATURES High-quality BRINOX pharmaceutical fabrication with complete PED Module G individual approval by TÜV SÜD, CE 0036 marking, and fully documented FAT inspection. Not a standard tank – this is audited project quality with comprehensive GMP-compliant documentation.

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 11H82290, Exercise Book Manufacturing Machine E.C.H. WILL GmbH / Model Alpha RF (manufactured in 2012) For the production of finished exercise books with pre-printed covers Technical Data Mechanical paper web speed/minute: max. 300 m Working strokes/minute – converting section: max. 60 At 4-up production – books/hour: max. 14,400 Reel width: max. 960 mm / min. 580 mm Reel diameter: max. 1,200 mm Printing length (cylinder circumference): max. 670 mm / min. 300 mm Cut-off length – cross cutter: min. 300 mm For exercise book production: max. 500 mm Bwjdpfozq Av Tex Albjt For skid production: max. 670 mm Adjustment steps: 5 mm Number of cuts/minute – cross cutter: max. 1,000 Finished article size range (unbound side x bound side): max. 245 x 480 mm min. 145 x 145 mm Sheet count: min. 5 / max. 50 Article thickness (unfolded): max. 5 mm Main Equipment Reeling Units • 2 x shafted reeling units Ruling Tower • 1 x ruling tower for a maximum of 4 ruling inkers Note: The ruling tower is equipped for either: • 2-color ruling from 1 web, or • 1-color ruling from 2 webs Longitudinal Perforating Unit (for 1 web operation) • 1 x longitudinal perforating unit Cross Cutting Unit • 1 x 1-knife cross cutting system allowing quick and easy knife exchange and adjustment Anti-Static System • Anti-static equipment for paper handling Sheet Overlapping Device • 1 x sheet overlapping device Sheet Counting and Collating Unit • Sheet counting and collating system Cover Feeders (1st / 2nd / 3rd / 4th Cover Feeder) • Will automatic feeder for pre-printed covers Deep Pile Delivery • Deep pile delivery unit, in-line system for collecting large size sheet sections Stitching Unit • Wire size: No. 24–26 • 9 x stitching heads Sectional Folding Unit • 1 x sectional folding unit Square Back Pressing Unit • 1 x square back pressing unit Trimmer • 1 x fore-edge trimming knife • 3 x separating knives • 2 x lateral trimming knives Corner Rounding Device • Corner rounding unit for finished exercise books Book Turning Unit • Book turning station for even stacking Book Stack Discharge • Book stack delivery • Book flipping & title design mixing delivery table (retrofitted) Electrical Equipment • Device for maintaining suitable temperature for electronic components in switch cabinets Pneumatic Equipment • Pneumatic system for machine operation

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: NS-009-0000-300, type of input current: AC, nominal power at 50% duty cycle: 250 kVA, throat depth: 300 mm, short-circuit current: 50,000 A, input voltage: 400 V, type of cooling: water, total width: 1,000 mm, total length: 1,000 mm, total height: 1,850 mm, overall weight: 1,000 kg, open-circuit voltage: 22 V, Zens Multifunction Resistance Welding Machine 250 kVA MF – 23 kN – 50 kA – Year of Manufacture 2013 For sale is a high-quality Zens multifunction resistance welding machine in a robust industrial design. The system was developed for demanding resistance welding processes and is ideally suited for series production in the automotive, supplier, electrical, and metal industries. The machine operates with modern medium frequency (MF) technology and achieves a welding power of 250 kVA at a 50% duty cycle. The powerful SER medium frequency inverter (700 A) enables a maximum welding current of 50 kA and ensures maximum process stability as well as reproducible welding results. With a maximum welding force of 23 kN and an overhang of 300 mm, the system is suitable for a wide range of resistance welding applications. Bwedpozqucfjfx Albjt Technical Data Manufacturer: Zens Machine Type: Multifunction Resistance Welding Machine Year of Manufacture: 2013 Welding Power: 250 kVA (Medium Frequency / MF) at 50% duty cycle Max. Welding Current: 50 kA SER Medium Frequency Inverter: 700 A Welding Control: SER-Mega1 Maximum Welding Force: 23 kN Overhang: 300 mm Equipment CE-compliant protective enclosure CE safety light curtain Welding table for welding forces up to 23 kN Pressure compensation tool QSF-M quality assurance system Position measuring system for process monitoring PLC control (Siemens S7) Robust industrial design for continuous industrial operation The combination of powerful medium frequency technology, precise force and position control, and modern PLC and SER welding control ensures high process reliability and consistently reproducible welding results. Thanks to the complete CE safety equipment, the machine can be easily integrated into existing production lines. The system is in good condition and can be inspected and demonstrated at any time by prior appointment.

Year of construction: 1985, condition: used, Pressurised tank cellar with 4 upright 324 hl stainless steel pressure tanks and with double-seat valve solution on the operating level. The tanks are cooled using ice water. Additional title: 4 pressure tanks Diameter/tank: 2550 mm Total height/tank: 7360 mm Bwodpfx Asvcqynolbot Cooling surface/tank: 25 m² Perm. working overpressure: 3 bar Systemic volume: 324 hl Length: 12 m Width: 4 m Height: 7,5 m Weight: 2585 kg Material: stainless steel AISI 304 Features: Tank cleaning equipment with spray head, safety valve, pressure gauge, air valve combination; sampler, level indicator with valves, outlet valve Periphery: Inlet and outlet pipework via double-seat valves

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 400-223, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 200 mm, feed rate X-axis: 20,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, mount diameter: 40 mm, table length: 2,500 mm, table width: 1,250 mm, spindle speed (min.): 100 rpm, spindle speed (max.): 30,000 rpm, rapid traverse X-axis: 20,000 m/min, rapid traverse Y-axis: 20,000 m/min, rapid traverse Z-axis: 20,000 m/min, tool diameter: 20 mm, number of slots in tool magazine: 30, We offer this used MB-Portatec GmbH basic IIS Portatec basic II.S portal milling machine, manufactured in 2011. Manufacturer: MB - PORTATEC GmbH Bwsdpfsy U R Sysx Albet Type: basic II.S Serial number: 400-223 Year of manufacture: 2011 -Application: Processing of aluminum and plastics from sheets up to 2500mm. -Optional extra: Vertical clamping system. -Accessories: Vacuum pump and extraction system with pre-separator. -MMS system -Programmable vacuum fields If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2021, Elements: Product transport/transfer area, robot stations, packaging material feed, forming/transfer area, multi-lane magazine/handling area, number of suction stations: 16, with CE marking. An on-site inspection is possible. Bsdpfx Aljzxhk Sjbswt

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location Bjdpozizkysfx Albjwt 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: excellent (used), Year of construction: 2021, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: 2021-1504-QN, High-end metal separator for inspecting bulk materials in free fall Material: stainless steel 304 Surface: sandblasted Sensing tube material: PE, anti-static, food grade Rejector: single flap type RH Protection rating: IP66 Electronics assembly: detached Control electronics cable length: 3 m Nominal width: 150 mm Orientation: vertical, top to bottom Power supply: 100-240VAC 50-60Hz LNPE - Without power cable Pressurized air supply: 6-10 bar Bedpfx Aszvwlmjlbjwt Expected sensitivity: FE: 0.4 mm NE / Al: approx. 0.4 to 0.56 mm Stainless steel: approx. 0.4 to 0.72 mm Electronics outside ATEX Zone Inside: Zone 20 within metal separator (pipe) = II 1 D Ex h IIIC T135°C Da Outside: Zone 22 surrounding metal separator = II 3 D Ex tc IIIC T135°C Dc IP65 QUICKTRON 07 RH metal separators are used for inspecting powders and granules in free-fall lines. They are available in nominal widths up to 300 mm and can therefore cover all application areas, from the laboratory to truck loading. Their hygienic design and easy cleaning prevent cross-contamination between product batches. Depending on the requirements, they can increase process safety or fulfill the task of outgoing goods inspection. Mesutronic metal detectors use state-of-the-art technology to protect your production, your reputation, and your customers from damage caused by metallic foreign objects. Digital signal processing, combined with innovative evaluation methods, comprehensive self-monitoring, and ease of operation, ensure the optimal function of the system and the successful completion of all types of audits. The devices are complemented by an extensive range of accessories and variants, from multi-frequency technologies to test bodies and material certificates. The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or in the production plant in Europe. The details for optimal transport need to be clarified. The machine price does not include packaging.

Condition: excellent (used), Year of construction: 2023, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: 4110, travel distance X-axis: 4,500 mm, travel distance Y-axis: 1,400 mm, overall weight: 11,000 kg, spindle speed (max.): 4,000 rpm, coolant supply: 7 bar, spindle motor power: 13 W, number of spindles: 1, number of slots in tool magazine: 14, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, CMA GRD 4514 The CMA CNC machining center GRD 4514 offers a highly efficient solution for flexible drilling, threading, and milling operations in an extended format. Equipped with a 13.1 kW motor and a spindle speed of 50 to 4000 rpm, the system enables effortless drilling of holes up to 36 mm, as well as the cutting of threads up to M24 (based on ST 40 and HSS-Co cutting insert drills). - Extended work area and travel ranges: Table dimensions: 4500 x 1330 mm (effective machining length X-axis: 4500 mm) - Travel ranges X/Y/Z: 4500 x 1450 x 500 mm - Chip conveyor: Directly integrated into the machine table for optimal chip removal Productivity through pendulum operation: Thanks to the generous X-axis travel of 4500 mm, this variant is ideally suited for efficient pendulum operation. You can safely load and unload workpieces on one half of the table while the machine produces uninterruptedly on the other half. Protection is provided on the front side by a dynamically moving laser area sensor on the machine head. Software & Intelligent Control: Graphical programming: Including automatic determination of cutting data and nesting of multiple products, even different ones, on the large table. Collision warning: Integrated protection for maximum process safety. Height correction: automatic measurement and correction of the workpiece height for 100% precise countersinking and reaming. CAD/CAM extension: Optionally, a conversion of 2D/3D drawings directly into DIN/ISO machine programs is possible. Standard equipment of the complete system: - Automatic tool changer for 14 tools Bjdpfezuw Eqox Albswt - Automatic tool length measurement - Fixed light curtain in the Y-direction (500 mm above the table) and rear protective fence - Powerful coolant system with emulsion - Ethernet connection for fast remote service

Condition: used, Year of construction: 2000, Flotation tank. - Designed for cooling with ammonia (can also be cooled with glycol), 1 x frame cooling. - Stainless steel - insulated - Stand frame, short -Cleaning air fitting with vacuum valve and safety valve Capacity: 431 hl Operating pressure: 4 bar Material: Stainless steel 1.4301 Bwodpfxsxbqg Ie Albet Position: vertical Base construction: short supporting skirt Features: Cooling: 1 x side wall cooling jacket; swivel opening with outlet; sampling valve; insulation; dearation and cleaning combination with 2 safety valves; temperature measurement; volume measuerment

Condition: used, Year of construction: 2017, operating hours: 20 h, functionality: unexamined, machine/vehicle number: 10660, filling weight (min.): 20,000 g, filling weight (max.): 1,100,000 g, Second-hand Feige ATEX pallet filling machine for sale. type 16.1-B-00x Ex II 2G c IIB T3 The machine comes with a new Stainless steel filling valve and a new filling lance, and is equipped with Feige FST-10E weighing electronics (latest weighing electronics). Easy adjustable for different packages and easy to operate. Bwjdpfx Alszxhtaebst Proven technology, Feige has sold over 5.000 filling machines. Suitable for filling weights. from 20 kg to 1,100 kg. Suitable for canisters, drums on a pallet and IBC's . Optional installation by our own local service engineers (Benelux).

Condition: good (used), functionality: fully functional, Year of construction: 2024, The bunker conveyor from Lange Fördersysteme is for sale; it was previously used by a manufacturer of medical technology equipment. Bjdpfozyr Nbox Albewt Conveyor belt length: 2100 mm Discharge height, side: 1600 mm Usable width: 190 mm Cleats: 20 mm high, spaced 130 mm apart Container size: L: 1500 mm, W: 580 mm Spindle for discharging the bulk material Mounted on adjustable feet Base frame: L: 1800 mm x W: 1000 mm

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: F50, For sale is a FiberFlow F50 cooling die (year of manufacture 2024) from DIL Engineering GmbH, a specially developed solution for structuring alternative proteins in high-moisture extrusion (HME). The FiberFlow F50 is designed specifically for research and development (R&D) applications, product development, and pilot trials. With a throughput of up to 50 kg/h, it is ideal for developing and optimizing formulations and processes in the field of alternative proteins, for example, for plant-based or hybrid meat and fish alternatives. By precisely cooling the extrudate, fibrous and meat-like product structures can be created. Bsdpfx Aezr Hq Rslbewt The system has a modular design and can be configured with one or two segments, depending on the requirements. In addition, one or two separate cooling circuits are available, which ensures precise temperature control and, consequently, consistently high product quality. The integration of inline measuring systems is possible and allows for continuous process monitoring and optimization. Particular emphasis was placed on hygienic design, ensuring that the system meets the high requirements of the food industry. Due to the well-thought-out design, cleaning is simple and fast, which is a major advantage, especially in development operations. The FiberFlow F50 can be combined with a wide range of different extruder types and manufacturers. If required, a customer-specific adapter can be manufactured for the mechanical connection to the respective extruder (offered individually depending on the existing extruder). We would be happy to check the technical compatibility with your existing extrusion system in advance.

Year of construction: 2022, condition: used, functionality: fully functional, machine/vehicle number: 3352, RAMPF dispensing system with MS-S mixing system (static) Material used: Rampf RAKU PUR 21-2080-1, component A and component B The dispensing head has been extended with a Y-shaped slide. - Manual adjustment for the mixing system - RAMPF mixing system MS-S (static) - Pressure monitoring for component A + B - Material pressure tank 50 l for component A - Level monitoring for component A + B - Material recirculation to the dispensing pump for component A and B - Material evacuation for component A - Vacuum pump 25 m³/h - Waste container 60 l with pipe -> The collection trays have been replaced with mobile containers. - Trolley for waste or rinsing container - Container frame/machine frame, 3-part - Work table approx. 1,400 mm x 500 mm with table top - Transfer station for lid drum, component A - Transfer station for bung hole drum, component B - Dispensing control (Siemens PLC control based on S7-300) - Precision piston dispensing pump for component A and B - Positive displacement metering pump A, component, 257 ccm - Positive displacement metering pump B, component, 64 ccm --> 1 x spare positive displacement metering pump A and positive displacement metering pump B are included. These have been reconditioned by Rampf as an exchange unit. (see picture) Bjdpfxszgck No Albowt Note: The potting system is located at our site in Austria.

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, The offer includes a used G2000 bun production line with a Mini Rex Futura divider-rounder from 2009. It is designed for the production of: • round, marked buns • elongated, unmarked buns • cut buns • twisted buns • Kaiser rolls • hot dog buns • Poznań-style buns Product description: • Fully automatic and compact bun production line • Based on a Mini Rex Futura divider-rounder from 2009, which is rotary • 2-row operation Bwjdpfx Ajy And Njlbst • Manual removal of products from the discharge conveyor • Marking station with easily replaceable tools; includes heads for: Kaiser rolls and Korinsky buns • Integrated elongation and flattening unit • Weight range: - for marked buns from 25g to 75g dough piece weight – output: from 1,800 pieces/h to 2,640 pieces/h, - for unmarked buns 80g - 125g dough piece weight – output: from 1,800 pieces/h to 3,960 pieces/h. • Fermentation time: approx. 6 minutes at an output of 2,000 pieces/h • Dough types: wheat, whole wheat, yeast dough, donuts. • Single-person operation The machine is in the final stage of renovation. The attached photos show its current, actual condition. If you are interested in the price and would like to see more photos, please contact us.

Condition: used, Year of construction: 1974, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 8002/6410, drilling depth: 1,000 mm, drill diameter: 30 mm, type of input current: three-phase, spindle motor power: 21 W, table length: 1,000 mm, input voltage: 550 V, mount diameter: 160 mm, number of spindles: 1, drilling capacity: 1,000 mm, quill diameter: 30 mm, Equipment: rotational speed infinitely variable, Deep hole drilling machine for up to 1000 mm and 30 mm diameter, used for drilling aluminium, regularly serviced, includes a significant quantity of drills. Machine is fully operational and in continuous use. Siemens control, Simatic PANEL, documentation available. Bodpfjx Ehg Tjx Albewt

Condition: excellent (used), Year of construction: 2016, usable tank capacity: 18,000 l, total width: 2,200 mm, total height: 4,500 mm, For Sale: Sourdough preparation and storage set 3x IsernHäger Cooled and insulated stainless steel mixing/storage tank + 1x Diosna Isernhager preparation tank 3x PABST MF6000 stainless steel mixing tank - 6,000 l (2016) - Insulated (IsernHäger) Technical specifications: Brand: PABST Type: MF6000 Year of manufacture: 2016 Capacity: 6,000 liters Material: Stainless steel Insulation: Yes, fully insulated Manhole: Yes, equipped with an inspection hatch Bsdpfx Ajzval Aelbjwt Total height: approx. 4,500 mm (4.5 meters) Tank height (without frame): approx. 2,800 mm Total width/diameter: approx. 2,200 mm Net weight: 1,650 kg Mixing system: Yes, equipped with a built-in agitator Agitator power: 7.5 kW Description: High-quality PABST MF6000 vertical stainless steel storage and mixing tank for sale. These high-quality industrial tanks from 2016 have a capacity of 6,000 liters each and are ideally suited for the food industry, including large-scale bakeries, for the storage and processing of liquid ingredients or dough products. Equipped with a powerful, integrated agitator (7.5 kW) mounted on the top, the tank ensures very efficient mixing and homogenization. The tank is fully insulated to maintain a constant product temperature during processing or storage. Key features: High-quality construction: Made of high-quality stainless steel for maximum hygiene and durability. Powerful agitator: Integrated 7.5 kW motor effortlessly handles fluids with varying viscosities. Full insulation: Excellent temperature control for sensitive ingredients. Easy to maintain: Equipped with an inspection hatch (manhole) on the top for easy access and cleaning. Safe design: Robust vertical construction on heavy-duty legs. 1x IsernHäger Diosna storage tank 1000 syst Brand: IsernHäger Load cells: Yes Manhole: Yes Own weight: 410 kg Stainless steel: Yes Total dimension Height: 2000 mm Year of manufacture: 2016 Type: 1000 syst Agitator power: 5.2 kW Tank diameter: 1300 mm Tank height: 1150 mm It is possible to view these tanks at our location. If you have any questions or comments, please do not hesitate to contact us. Sincerely, Leo Holland

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 1605269/1, total width: 630 mm, total height: 1,115 mm, total length: 1,010 mm, working width: 460 mm, input voltage: 400 V, type of input current: AC, overall weight: 200 kg, power: 0.37 kW (0.50 HP), roller diameter: 100 mm, passage height: 80 mm, feed rate X-axis: 35 m/min, height adjustment type: mechanical, tank capacity: 2 l, roll width: 450 mm, input frequency: 50 Hz, workpiece height (max.): 80 mm, Equipment: double-sided, For sale is a well-maintained glue and roller application machine from Axel Wirth Maschinen GmbH, type LW 100/450. The machine was manufactured in 2021, has comparatively few operating hours, and is in technically perfect and well-maintained condition. A particular advantage is the adjustable working speed or feed rate (6 - 35 m/min). This allows the machine to be flexibly adapted to different workpieces, materials, and application media. The machine is mounted on a sturdy, mobile base with lockable wheels. As a result, it can be easily moved within the production area and safely positioned at the respective location. A total of two identical machines are available. The stated price applies per machine. An attractive package price is possible if both machines are purchased. The LW 100/450 is suitable for the uniform application of liquid and pasty media onto flat or textured workpieces, for example: - Glue and adhesive - Oil and wax - Stain and primer - Paints and dispersions - Resins and comparable application media Among other materials, wood, solid wood, parquet flooring, chipboard, cork, cardboard, metal, stone, rubber, and insulation materials can be processed. The application quantity can be adjusted via the lateral adjustment devices. The rollers and glue trays can be removed with a few simple steps, making the machine easy to clean. Technical data and equipment Manufacturer: Axel Wirth Maschinen GmbH Type: LW 100/450 Year of manufacture: 2021 Nominal width: 450 mm Working width: approx. 460 mm Passage height: approx. 80 mm Diameter of the application rollers: 100 mm Capacity per glue container: approx. 2.3 liters Drive power: 0.37 kW Adjustable working speed or feed rate Application rollers above and below Separate control cabinet Main switch and emergency stop Mobile base with lockable wheels CE marking Condition: used, well-maintained, and technically perfect Operating hours: comparatively low Bwsdpezr H Aasfx Albjt Inspection and test run are possible after prior appointment. Collection at the Leun location. Shipping by freight forwarder can be organized if required, upon agreement. If you have any questions or are interested, please do not hesitate to contact us. We will be happy to provide further information and photos. Price: €5,900 (negotiable) per machine plus VAT (can be shown). Package price for both machines: on request All information is provided to the best of our knowledge. The sale takes place under the conditions applicable to the seller for used machines.

Condition: used, Year of construction: 2003, machine/vehicle number: 59 526 01 579 0010, functionality: fully functional, Vötsch VTU 250/200/125 – Heat and drying cabinet. Bwedpfx Alezu Ngasbet

Condition: used, Year of construction: 2022, operating hours: 10 h, functionality: fully functional, machine/vehicle number: NS-009-50Hz-11kN-300, type of input current: AC, nominal power at 50% duty cycle: 160 kVA, throat depth: 300 mm, short-circuit current: 25,000 A, input voltage: 400 V, type of cooling: water, total width: 1,000 mm, total length: 1,000 mm, total height: 1,850 mm, overall weight: 1,000 kg, open-circuit voltage: 15 V, Zens Multifunction Spot Welding Machine 160 kVA – 50 Hz – 11 kN – Year of Manufacture 2022 For sale is a Zens multifunction spot welding machine in a robust industrial design. The machine is designed as a 50 Hz alternating current system and is suitable for various spot welding applications. The machine features an integrated seam welding adapter. The corresponding seam welding heads are not included in the scope of delivery and can be purchased separately. Thanks to the modular design of the machine, it is possible to use different welding tools and applications. Technical Data Manufacturer: Zens Model: NS-009 Machine Designation: Multifunction Spot Welding Machine Year of Manufacture: 2022 Welding Technology: Alternating Current (AC), 50 Hz Welding Power: 160 kVA Duty Cycle: 50% Max. Welding Force: 11 kN Welding Control: SER PLC Control: Siemens CE Safety: 2-Hand Control Bodpfoztn Sxox Albewt Seam Welding Adapter: Integrated Equipment Zens Multifunction Spot Welding Machine 50 Hz Alternating Current Technology Integrated Seam Welding Adapter SER Welding Control Siemens PLC Control Device Carrier System with Touchscreen 2-Hand Control as CE Safety Device Modular Machine Design Robust Industrial Design Available Separately The seam welding heads are not included in the machine's selling price and can be purchased separately. The "On Top" water cooling unit is also not included in the machine's selling price and can be purchased separately. The machine is in good condition and can be inspected and demonstrated by appointment. Note: Seam welding heads and the "On Top" water cooling unit are available separately and are not part of the machine offer. Subject to technical changes and errors.

Condition: used, Year of construction: 2017, functionality: unexamined, R+P Stud Welding Cell Enclosed protective cell made of aluminum profiles Safety enclosure with protective doors Signal light Integrated control cabinet Documentation available Suitable for automated stud welding processes Nelson Stud Welding Machine Manufacturer: Nelson Stud Welding Type: SD-FSE 1000S Year of manufacture: 2017 Bwjdpfxjzvylpe Albjt Serial number: 1739289 Part No.: 80-07-57 Technical data: Supply voltage: 24 V DC / 90 V DC Input current: 1 A / 10 A Welding current: up to 2000 A (duty cycle 2%) Protection class: IP20 Polarity: STD Scope of delivery: Welding gun Connection cable Mobile equipment cabinet Both units were last used together as an automatic stud welding system.