Used Hebrock K36 Next for sale (1,167)

Condition: ready for operation (used), Year of construction: 2004, Brand: Hebrock Model: AKV 83 F Year of manufacture: 2004 Dedpju Racxjfx Al Aewc Machine no: 10759 Technical data: Workpiece thickness: from 10 - 50 mm Feed speed: 3 - 4 m/min Electrical connection: 220/380 Volt, 50 Hz. Power: 3 KW Dimensions: 1750 x 800 x 1250 mm (complete) Weight: approx. 95 kg. Heating: 3 KW, with stepless electronic temperature control, 0 - 650 degrees C Motor: 3.5 kW Stock no: 2002311BXA

Year of construction: 2000, condition: used, Serial number: 385/65 R 22.5 NETTE TRAILER TIRES. Dsdpfxjx Ahkae Al Ajwc

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: AB / 231059, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 23 A, input frequency: 50 Hz, type of input current: AC, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 11 m/min, actuation type: electric, total height: 1,600 mm, total length: 3,600 mm, total width: 900 mm, overall weight: 700 kg, Equipment: documentation/manual, One sided edgebanding machine SCM Olimpic K360. Second owner, both were small worshops, so limited usage and well preserved. Regularly maintained by authorised service. Main parameters: panel thickness 8 - 60mm, edge thickness 0.4 - 3mm (up to 10mm for solid wood) Main features: - pre-milling station - gluing station - feed magazine - pressure section - end-trimming unit - top and bottom trimming unit Dsdjz I U S Sopfx Al Aowc - corner rounding unit - scrapping and buffing units - controller with LCD panel - extra glue container

Condition: used, This listing is for Genomix GCG-SR-1 10X Next Gen Single Cell Controllor The unit is in full working condition and ready for immediate use This advanced single cell controller provides precise fluidic control for high-throughput genomic sequencing and analysis workflows Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Dodpfszghrlsx Al Aswc Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: used, Separation wall 2000 x 2200 with 3 levels of filtration, filtration area 2000 x 1000. Working area 1 meter deep with recessed lighting IP65, and a table for storage. Fan NEXT 211 1.1 kW ATEX explosion-proof, max 4500 m3/h mounted on top of the wall. Starter start/stop, and duct connection unit with shock absorber to the outside. Stand is good. Dwsdpfx Ajvuqg Sjl Aoc Can be viewed in Vilnius. If you have more questions, we will be happy to answer.

Condition: used, Year of construction: 2021, operating hours: 7,593 h, load capacity: 4,500 kg, lifting height: 3,180 mm, mast type: duplex, fork length: 2,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 4,500 kg Dodpfx Aljz Iwi Te Aewc Lifting height: 3,180 mm Fork length: 2,200 mm MACHINE DETAILS Mast type: Duplex Drive type: Diesel Dimensions & Weight Dimensions (L x W x H): 5,600 x 1,500 x 2,400 mm Dead weight: 6,413 kg UVV valid until: 04/2027 Next service due in: 564 hours Operating hours: 7,593 h EQUIPMENT 3rd + 4th valve Free-lift mast without central hydraulic cylinder Formerly a Still full-service unit Hydraulic fork positioner Side shifter Full cab Heater Windshield wiper White, non-marking tires LED work light (front) LED work light (rear) StVZO lighting with turn signals for road approval Comfort seat with lumbar support Seat heating All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. A storage fee of €20 per machine per day will be charged if the machine is not collected on time. Outstanding storage fees must be paid in full before collection. Lot number: 32

Condition: used, Year of construction: 2001, functionality: fully functional, Profile Bending Machine SAF Curvatrici (TUWI) DS 60 HV – Top Condition & Huge Tool Package Description: For sale is a high-quality profile bending machine, type SAF Curvatrici (TUWI) DS 60 HV, from the first owner. The machine was purchased new by us in 2001 and has been in our possession ever since. It is fully operational and can be demonstrated under power after prior consultation. Special highlight – Modernized control system (08/2019): The control system was completely overhauled and modernized by a specialist company in August 2019. Now, 10 different feed sequences can be programmed. After a programmed value is reached, the next value is automatically approached by pressing the button again (value input in ascending order). Technical data & equipment: • Shaft diameter: 50 mm (for all three axes) • Acceptance height: 115 mm • Additional equipment from factory: 2 RCD correction rollers for bending angle iron (R/L). The original, lateral and height-adjustable shafts (38 x 250 mm) are also included. • Special modification for transport: Specially manufactured base frame for transport including four height-adjustable support plates. • Additional device for angle iron: A 10 mm thick plate was mounted on the top side. An additional hydraulic cylinder can be attached here, which pushes the vertical flange extremely close to 90° during bending (adjustable pressure depending on the angle). Note: The cylinder is not included in the standard price, but can be requested separately. Enormous scope of supply (Extremely many tools included!): The biggest advantage of this offer is the extremely extensive tool package, which is completely included in the price: • Standard tools: Complete set according to the machine’s scope of supply • 18 different roller sets: According to the list from Ø 8 mm to Ø 33.7 mm • Special tools for angle iron (according to the list) • Special tools for flat steel (light & heavy axis) Dedsz Ix Ukopfx Al Aowc • Special tools for square and rectangular tubes • Special tools for diagonal square material • Documentation: Original operating manual is fully available Note: The machine will only be sold as a complete package together with the complete tool set according to the attached list. Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: The disassembly, loading and collection must be organized and carried out by the buyer himself or by a forwarding agent commissioned by him. Technical specifications according to available documents. Subject to prior sale.

Condition: used, Year of construction: 2008, Overview This rotary capping machine (ROPP / roll-on closures) was manufactured in 2008 by AROL Closure Systems. The machine is designed for the application of roll-on closures in beverage and liquid packaging lines, particularly for 28 × 1.5 aluminum closures. It is currently mounted on a pallet and in stored condition. The machine is described as used, with 12 capping heads in very good condition. Visible surface oxidation on the frame is present due to storage but does not affect functionality. The control cabinet is partially open/incomplete with missing HMI.  Dwodpfxoy I Nt Nj Al Aec Technical data - Formats: 28 × 1.5 closures - Application: Capping of bottles (roll-on closures) - Configuration: Rotary turret with 12 capping heads - Neck finish: 28 × 1.5

Condition: excellent (used), Year of construction: 2025, STASZAK KWE-100 Professional Electric Smoking & Cooking Chamber / Smokehouse – 100–130 kg – 2025 For sale: STASZAK KWE-100 professional electric smoking and cooking chamber with integrated wood-chip smoke generator, manufactured in 2025. Lightly used and in excellent working condition. Suitable for processing meat, sausages, poultry, fish, cheese and other food products. The integrated smoke generator uses natural wood chips, allowing different wood varieties to be used depending on the required smoking process and flavour. Original purchase price: £22,000. ### Manufacturer & Support Manufactured by PPHU STASZAK, an established Polish manufacturer of professional smoking and thermal-processing equipment with over 25 years of industry experience. The manufacturer remains in operation, with technical support, servicing and spare parts available. ### Capacity & Functions Production capacity: approx. 100–130 kg per batch / 1 smoking trolley, depending on the product and loading arrangement. Supplied with 2 stainless-steel smoking trolleys – one operating trolley and one spare/loading trolley, allowing the next batch to be prepared during operation. Processes include: - Hot and cold smoking - Cooking - Roasting and baking up to 160°C - Drying - Cooling - Automatic chamber washing/cleaning ### Technical Data Model: KWE-100 Year: 2025 Dimensions (L × W × H): 1300 × 1300 × 2300 mm Electric motor: 3.0 kW Chamber heating: 28 kW Smoke generator heater: 0.9 kW Total power consumption: 31.9 kW Power supply: 400 V, 3-phase Weight: approx. 1,000 kg Includes extractor fan, chimney, 2 stainless-steel trolleys and a selection of spare parts. Control menu available in Polish, English and Russian. ### Documentation & Demonstration Supplied with technical and operating documentation, including electrical wiring diagrams/schematics. The machine is currently installed, connected and fully operational and can be inspected and demonstrated before purchase. A live video demonstration via WhatsApp can be arranged. Additional photos, documentation and operating videos are available on request. ### Dismantling & Transport Dismantling and preparation for collection are included in the sale price. Assistance with loading will also be provided where reasonably possible. Dwedpfx Ajz It Hhsl Ajc Transport/delivery can be arranged at additional cost, depending on destination. Assistance with reassembly/installation may also be available by prior arrangement at additional cost. Alternatively, the buyer may arrange their own transport. For overseas buyers, we can cooperate with the buyer's chosen transport company and assist with collection. ### Price £10,900 ONO – No VAT applicable. Located in the United Kingdom. Please contact me for further information, photos, documentation, videos, live demonstration or inspection. Other equipment also available separately: AK-Ramon AS-30 Bowl Cutter (30 L) – very good condition. Vacuum Tumbler – approx. 100–120 kg capacity. Photos and further information available on request.

Condition: excellent (used), Year of construction: 2022, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: SN210551, overall weight: 14,000 kg, type of input current: AC, input voltage: 400 V, power: 400 kW (543.85 HP), Equipment: type plate available, A MIXACO heating/cooling mixer is a combined system consisting of a heating mixer and a downstream cooling mixer, specifically designed for the processing of powders, granules, and compounds (e.g., PVC dry blends, WPC, or masterbatches). Technical specifications – summary (details can be found in the documents): Hot mixer: • Volume: 3500 liters – Usable volume: 2500 liters • Tip speed: 5-50 m/s • Made of duplex steel – 1.4462 stainless steel • Power drive with 400 kW FC controlled • Vacuum up to 150 mbar abs. Cold mixer: • Volume: 9000 liters – Usable volume: 7650 liters • Tip speed: 3.5 – 7 m/s • Made of 1.4541 stainless steel • Power drive with 90 kW FC controlled The operating principle is divided into two physically and apparatus-wise separate process phases: 1. The heating mixer phase (heating and homogenizing) • Mechanical friction: In the heating mixer, a modular mixing tool rotates at a high circumferential speed (approx. 10–40 m/s). The intense flow and vortex formation (mixing vortex) causes the particles of the mixture to rub intensely against each other. • Heating: This mechanical friction generates the necessary thermal energy directly in the product, quickly and evenly heating the material to the desired target temperature (sometimes exceeding 100 °C). • Recipe component addition: At the same time, all recipe components, such as additives, dyes, or liquids, are perfectly homogeneously distributed. An integrated aspiration system also ensures the dehumidification of the mixture. 2. The transfer • Once the target temperature defined in the process program is reached, a contoured, dead-space-free outlet opens on the heating mixer. • The hot, homogeneous mixture is transferred with minimal residue and quickly to the cooling mixer, which is located directly below or next to it. The heating mixer is then immediately available for the next batch. 3. The cooling mixer phase (gentle cooling) • Heat exchange: In the cooling mixer (available in vertical or horizontal design), the hot material is passed over cooled surfaces. • Water cooling: A targeted cooling water circuit in the double jacket (bottom and side walls) efficiently removes thermal energy from the dry blend. • Agglomeration prevention: A slow, material-friendly stirring mechanism keeps the mixture in motion until the final storage temperature is reached. This prevents caking (compaction) due to residual heat before the material is transferred to silos or further processing. Summary created with AI. The units can be inspected in operation in the Netherlands. Dsdpfez Iww Rex Al Aewc The system for sale was used in the R&D center of UBQ for development purposes. This explains the very good condition for the low number of production hours. We also have a steel structure available for the setup. This is not included in the price. If there is interest, it can be negotiated separately. Currently, the system is located outside of Europe – we need to determine whether direct transport is feasible or whether import to Europe by UBQ is more sensible (which would allow for a sale within Europe with a reverse-charge mechanism).

Condition: excellent (used), Year of construction: 2022, machine/vehicle number: 05/22, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, workpiece length (max.): 3,000 mm, workpiece width (max.): 45 mm, workpiece height (max.): 1,200 mm, number of slots in tool magazine: 12, actuation type: electric, Equipment: CE marking, documentation/manual, CNC MACHINING CENTER TOP PROXIMA – 6 SIDES, AUTOMATIC LOADING, DOWEL INSERTION, AND RETURN For sale: CNC machining center TOP PROXIMA, year 2022, designed for the automatic machining of furniture components and panels. Machine in very good condition, well-maintained, and currently installed in a production facility. Dedpfsztkqdjx Al Aewc It allows for drilling, milling, and automatic dowel/hardware insertion operations, with the possibility of machining the part on up to 6 sides. It features two independent work units, one for the main side and one for the back side, reducing handling and intermediate operations. Automatic loading and buffer stock. The machine incorporates an automatic loader that acts as a production buffer. Parts can be identified using a barcode reader/scanner, associating each part with its machining program. It can also be integrated into an automatic line, receiving parts directly from previous processes. Before machining, it incorporates an automatic system for checking and measuring part height. Main functions: Vertical and horizontal drilling. CNC milling. Machining of up to 6 sides. Front machining unit. Rear machining unit. Automatic tool change. Automatic dowel insertion. Dowel insertion on the X-axis. Automatic dowel feeding. The machine has various spindles, electro-spindles, and specific units for drilling, milling, and dowel insertion. Direct output or automatic return Once machined, the part can continue with direct output to the next process or automatically return to the beginning using the conveying system. The return system also incorporates a loader/accumulator, allowing for the storage of machined parts and functioning as an output buffer. The machine can operate independently or be integrated into an automated manufacturing line. Main data: Manufacturer: TOP Model: PROXIMA Year: 2022 Maximum part length: approx. 3,000 mm Processes: drilling, milling, and dowel insertion Machining: up to 6 sides Loading: automatic with storage/buffer Identification: barcode Part control: automatic height measurement Output: direct or automatic return Control: industrial CNC Safety: enclosed installation Condition: Machine in very good overall condition, well-maintained. Operating hours are not available on the control panel. Availability: Availability to be confirmed. The machine is currently installed, and its removal will depend on the implementation of the new production line. Disassembly and loading: Disassembly, loading, and transport are not included. These tasks must be carried out by an external, specialized company at the buyer's expense.

Condition: excellent (used), Year of construction: 2026, machine/vehicle number: 62401, functionality: fully functional, total length: 7,050 mm, total width: 2,550 mm, total height: 2,500 mm, overall weight: 3,400 kg, Dry wood chips, firewood and other coarse, wet biomass in a container that goes straight onto your truck, with warm air blown through the perforated floor. This Lauber TroCo drying container was built in 03/2026 and has been used only three times by us. It is in very good condition and ready to dry. Only one unit available. This is a single used machine, not ongoing stock. Once sold, it is gone. Best for: drying coarse, wet biomass such as wood chips, firewood and other coarse plant material, then moving the container to where you need it with a hooklift truck. Not suitable for: finely ground bulk material unless you verify it with us first. A warm air source and the air hose are not included, you need to supply them. What the specifications mean in practice: - 34 m3 volume - one large batch per drying cycle instead of many small ones - Hooklift system (locking dimension 3,890 mm) - load, move and unload with a standard hooklift truck, no crane needed on site - Perforated ventilation floor with round air connection at the door end - warm air is pushed up through the whole load, so it dries evenly - Fitted tarp cover - keeps rain out during storage and transport - Rear rollers and ladder steps on the front - easier to roll off and to inspect the load - Gross weight rating 21,000 kg - heavy loads are no problem for the frame Technical data (from the nameplate): - Manufacturer: Lauber Trocknungstechnik, type TroCo, serial no. 62401 - Year built: 03/2026 Dodez I Dzispfx Al Aowc - Volume: 34 m3 - Length: 7,050 mm, height: 2,500 mm - Empty weight: 3,400 kg, permissible gross weight: 21,000 kg - Locking dimension: 3,890 mm - Colour: yellow - Safety inspection label (DGUV Rule 114-010) from the container builder is fitted, see nameplate photo Condition: Built 03/2026, used only three times by us, very good condition. Fully functional. Location: Stanserstrasse 50, 6064 Kerns (self pick-up, transport by arrangement). A hooklift truck, a suitable forklift or a crane is needed for loading. The container weighs approx. 3,400 kg empty. Why you can buy with confidence: - Built 03/2026, used only three times - Used by us, not rented out - Nameplate photos available, in-person inspection in Kerns OW by appointment Inspect before you buy: you may verify identity, condition and completeness at inspection or pickup. We guarantee what we control: the machine is what this listing says it is. We do not promise performance in an application we cannot assess, which is why we ask about yours first. Why buy now: This is a single used unit. Once sold, it is gone. Inspection is available in Kerns OW by appointment. First-buyer bonus: buy within the next two weeks (until 20 October 2026) and we take CHF 500 off the price. Valid until 20 October 2026, or until the machine is sold. Action: Send us your intended material, batch size and destination. We will confirm suitability and give you a transport estimate.

Condition: good (used), Durselen PB 16A four-head paper drill The device is in perfect condition, like new! This is the newest one. currently produced model. Production Germany. Four drilling heads with adjustable spacing. The machine has a pneumatic drill cooling system. Sliding work table. Automatic column system – a belt that is moved to the next position when worn out Technical data: Drill diameter: 2-16 mm, Stack height: 50 mm, weight: 300 kg Power supply 380V Automatic drilling cycle, controlled by a foot pedal. Smooth regulation of spindle speed and lowering speed of heads on inverters. Solid construction on a pedestal. Waste is directed to the built-in bin Drill table adjustable in every plane, front and side margins. The set includes operating tools and drills. Dwsdjz N R Umspfx Al Aoc

Condition: used, mileage: 530,006 km, power: 213 kW (289.60 HP), first registration: 12/2013, fuel type: diesel, number of seats: 38, gearing type: automatic, next inspection (TÜV): 07/2027, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to final sale, errors, typos, and prior sale: MAN Lions City LE A78, 38+40+1 + 2 emergency seats (Vehicle 116) First registration: 16.12.2013 530,006 km Engine: 6,871 cc Djdoz Nuaajpfx Al Aowc 213 kW / 289 hp Euro 5 EEV Next inspection: 10/2026, TÜV (technical inspection): 07/2027 Permissible total weight: 19,500 kg, unladen weight: 11,225 kg, payload: 7,275 kg Overall length: 11,895 mm x overall width: 2,550 mm x overall height: 3,225 mm Double doors at the front and rear Driver's cab with door 38 + 2 emergency seats + 40 + 1 Fold-out ramp Auxiliary heater + 2nd heater Retarder Fully automatic transmission Microwave 2 x electric mirrors + mirror heating 12-volt socket Emergency exit Stop brake Driver's seat ISRI with heating and ventilation Lawo Tires: 275/70R22.5, front approx. 60/80%, rear approx. 60/60% Various signs of wear and tear, consistent with the age Good overall condition 06.02.2025: Radiator and seat lowering valve replaced; 23.07.2025: Engine mount replaced; 27.01.2026: Rear left wheel bearing replaced Last inspection at 529,987 km on 15.07.2026, next inspection due at 589,987 km Price: €12,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the local court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors, typos, and prior sale.

Condition: excellent (used), The device performed only 140 measurements. NITON XL3t 980 GOLDD+ – a portable X-ray analyzer with a next-generation SDD detector featuring GOLDD technology. GOLDD technology enables significant improvements in accuracy and measurement time. This detector is 10 times faster than a conventional PIN detector and up to 3 times more accurate than a conventional SDD detector. The NITON XL3t 980 GOLDD+ analyzer achieves a unique combination of a 50kV X-ray tube with optimized measurement geometry and a patented processor and software. It allows for fast and accurate, simultaneous analysis of up to 28 elements: Mg, Al, Si, P, S, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Se, Zr, Nb, Mo, Hf, Ta, W, Re, Pb, Bi, Ag, Pd, Sn, Sb. Additionally, the analyzer enables the analysis of precious metals: Au, Pt, Ir, Ru, Rh. Analysis of light elements such as Mg, Al, Si, P without the use of helium is possible thanks to a special set of filters and a highly sensitive detector. Without helium, the determination of light elements is possible for concentrations above 0.x%. A large library of spectral databases for alloys enables the identification of stainless steels, tool steels, chromium-molybdenum steels, and alloys based on nickel, cobalt alloys, copper-based alloys, titanium alloys, and zinc, zirconium, and aluminum alloys. The analyzer provides very fast measurement. The analysis time for typical alloys is less than 3 seconds. An additional library for the analysis of light elements in the helium mode allows for the segregation and sorting of aluminum alloys such as: Dwedjzlcciopfx Al Aec cast alloys depending on the silicon (Si) or magnesium (Mg) content, aluminum (Al), silicon (Si), and phosphorus (P) content in bronzes, aluminum (Al) content in titanium alloys, magnesium alloys (Mg), zinc alloys with aluminum (Al). The analyzer enables the analysis of: all iron-based alloys (0.00x% – 100%) and non-ferrous metal-based alloys (0.00x% – 100%) and rare metals Hf, Ta, Re (0.00x – 100%) precious metal alloys Au, Ag, Pd, Pt, Ir (0.00x%-100%). The NITON XL3t 980 GOLDD+ analyzer operates based on BASIC PARAMETERS, meaning that it calculates the percentage content of elements based on a mathematical equation. The analyzer also allows for the development of its own analytical programs: an identification program that assigns a name, symbol, number, etc., to a known sample, and such samples will be identified by that name. a program for quantitative chemical analysis (SuperChem Teach Mode) – based on its own standards, we create our own calibration curves for quantitative analysis. The analyzer has a large, user-friendly, touch-screen display. The screen is color and tiltable, which facilitates reading the results during field work. It includes an integrated scanner and backlit alphanumeric sample identification codes. The software allows you to store up to 10,000 results in the analyzer's memory or transfer them to a computer. Connecting the device to a computer and controlling its operation via a computer is possible using a traditional cable or wirelessly via Bluetooth. It is supplied with two interchangeable batteries. One battery enables continuous operation for 8-10 hours without the need to recharge. It has two libraries, 900 and 800.

Condition: used, Year of construction: 2015, functionality: fully functional, operating hours: 170 h, pressing force: 320 t, working width: 5,100 mm, degree of automation: automatic, Equipment: emergency stop, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, TOSKAR press brake Pressure 320 tons Bending length 5100mm Bending length between columns 4100mm Speed of approach movement 100 mm/s Speed of bending movement 9 mm/s Speed of return movement 100 mm/s Opening 300 mm Distance to columns 500mm Year 2015 Only 170 working hours Dwedowq Aa Ijpfx Al Ajc 5 Axes Y1, Y2, X, R, deflection arrow CNC controller with NexT touch screen

Condition: used, mileage: 263,386 km, power: 130 kW (176.75 HP), first registration: 02/2021, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 06/2027, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), had accident, navigation system, soot filter, In accordance with our “General Terms and Conditions,” without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis until conclusion of sale, subject to errors, typos, and prior sale: Dwsdpjz Nt U Aofx Al Ajc VW Crafter Maxi, high and long version, with accident damage (Vehicle No. 233) First registration: 02/02/2021 263,386 km Engine: 1,986 ccm 130 kW / 177 hp Euro 6, WLTP Permissible total weight: 3,500 kg Unladen weight: 2,203 kg Payload: 1,297 kg Next TÜV inspection: 06/2027 PDC (Park Distance Control) Rear trailer hitch Next inspection due in 4,600 km Overall length: 6,836 mm x overall width: 2,040 mm x overall height: 2,590-3,080 mm Double-wing rear doors, 280 degrees; sliding door on passenger side Interior lined with wood 6 pairs of tie-down points in the floor Rail system in the floor Interior lighting Central locking with remote control 6-speed manual transmission Large display with touch screen, navigation, radio Partition with window Damage: sill, lower left and right Tires: 205/75R16C, front approx. 30%, rear approx. 50/60% Fully operational Price: €7,750.00 (net) All information is provided without any guarantee or warranty. Our “General Terms and Conditions” apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the District Court of Ludwigslust; for disputes exceeding this value, it is the Regional Court of Schwerin. Subject to errors, typos, and prior sale.

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, rotary table diameter: 900 mm, position of the milling head: Schwenkbar (35°), table diameter: 900 mm, total length: 6,000 mm, gear diameter: 1,200 mm, total height: 3,500 mm, total width: 3,900 mm, input frequency: 50 Hz, type of input current: three-phase, spindle speed (max.): 360 rpm, spindle speed (min.): 36 rpm, travel distance X-axis: 725 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 1,000 mm, overall weight: 24,000 kg, distance table to spindle center: 780 mm, tool diameter: 280 mm, controller manufacturer: LH90, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, A young Liebherr LC 1203 from the current LC generation: manufactured in 2009, with a motor milling spindle, capable of processing workpieces up to 1200 mm in diameter and weighing 9.5 tons, module 20 – the machine for large gears in gearbox manufacturing, wind power, mining, and heavy machinery construction. Serwema Retrofit Solutions, Chemnitz, optionally upgrades the machine to Siemens Sinumerik ONE, the latest control generation with full spare parts and support availability, and delivers it with a new, air-conditioned control cabinet manufactured in-house and a user-friendly interface. The mechanics remain in the well-maintained original condition with the original paint – a Liebherr from 2009 does not need a general overhaul, but a control system that will last for the next 20 years. Delivery time is six months from order. The machine mills spur and helical gears, as well as shafts up to module 20, in a reinforced version up to module 24, starting from a tooth count of 1 – including worm gears and special profiles. With 1000 mm of axial travel between the milling spindle axis and the table surface, long pinion shafts are securely clamped, and the 900 mm table supports 95 kN. The motor milling spindle rotates from 36 to 360 rpm, the milling head swivels by ±35°, and the tangential travel of 320 mm utilizes the full milling cutter length of 340 mm for long service life. Technical data: max. workpiece diameter 1200 mm, max. workpiece weight approx. 9.5 tons (table load 95 kN), table diameter 900 mm, distance between milling spindle axis and table axis 55–780 mm, distance between milling spindle axis and table surface 200–1200 mm, max. module 20/24, min. number of teeth 1, max. milling cutter diameter 280 mm, max. milling cutter length 340 mm, tangential travel 320 mm, milling cutter speed 36–360 rpm, max. table speed 12 rpm, swivel angle ±35°. Installation dimensions approx. 6.0 × 3.9 × 3.5 m, weight approx. 24 tons. Scope of delivery: optionally, a new Siemens Sinumerik ONE control system with Sinamics S120 drives, air-conditioned control cabinet manufactured in-house, user-friendly interface with Serwema gear cutting software, machine enclosure, magnetic chip conveyor, circulating and loss lubrication, hydraulic unit, coolant system, operating manual. Original color scheme. Acceptance in Chemnitz together with you; a mechanical overhaul or geometry inspection according to DIN is offered additionally upon request. Dedpfx Aez E Hx Ssl Aowc

Year of construction: 2019, condition: good (used), Venjakob RNV 2.0 Exhaust Gas Cleaning System This system incinerates gaseous pollutants and odors from the production exhaust air, releasing clean air into the environment. Extraction: Solvent-containing or odor-laden process air (e.g., from painting systems, the chemical industry, or printing plants) is fed into the system. Preheating: The contaminated air flows through internal ceramic heat storage units and is heated to a very high temperature. Combustion (Oxidation): In the combustion chamber, the natural gas inlet (the pilot burner) ignites the air. At a temperature of up to 850 °C, the organic pollutants (VOCs) completely break down into harmless water vapor (H₂O) and carbon dioxide (CO₂). Energy Recovery: The cleaned, hot air then flows through a second ceramic bed and releases its heat there. The system "stores" the heat for the next batch of contaminated air. This makes the system extremely energy-efficient, as after the start-up phase, hardly any additional gas needs to be supplied. System Data Dwsdpfjzrl Ibsx Al Aec Manufacturer: Venjakob Umwelttechnik Type: RNV 2.0 Year of Construction: 2019 Manufacturing Number: 15212 Throughput Volume: 2,000 Nm³/h Gas & Combustion Gas Type / Heating Value: Natural Gas H / 10.4 kWh/Nm³ Firing Heat Output Range: 30 kW Flow Pressure: 200 - 1,500 daPa Max. Combustion Chamber Temperature: 850 °C Electrical Connections Grid Connection: 400 / 230 V AC Connected Load: 24 kVA Current Consumption: 35 A "Everything from a single source: We would be happy to offer you suitable bank financing for your project." More articles – new and used – can be found in our shop! International shipping costs upon request!

Condition: used, maximum load weight: 23,200 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 04/2003, next inspection (TÜV): 10/2026, total length: 14,000 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Low-bed trailer * Separate hydraulic unit (24V) * Hydraulic liftable roof * Drinking system with water tank * Hydraulic loading ramp, 2-part * 2 intermediate decks with 2 partition grilles each * Wheel arches * Fan * Feed flap * Ventilation flaps ----Gooseneck * Liftable roof * 2 intermediate decks * Drinking system * Feed flap * Fan ----* 1st axle liftable * Wabco Trailer EBS * Air suspension * BPW ECO axles (twin tires) * Drum brakes ----* Tire size: 245/70R17.5 * Technically permissible total weight: 35,000 kg * Tare weight: 11,800 kg * Overall length: 14,000 mm * Next inspection due: 04.2027 ----Vehicle number: 12491----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We will gladly assist you with all formalities that arise when purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee:----Trade-in of your old vehicle, TÜV/SP inspection, complete export processing, arrangement of financing, application for export license plates, vehicle transport, vehicle registration, recoveries and vehicle transport. ----?YOUR VTS TEAM Dwodpfx Ajz N Rh Tjl Aec

Condition: used, functionality: fully functional, cutting width (max.): 130 mm, Stenner VHJ band resaw, machine size 105, made by Stenner of Tiverton, one of the UK's most respected names in sawmilling machinery. It's a heavy-duty, cast-iron industrial resaw that has been used and maintained in a professional sawmill, with full records kept throughout its working life. Specification • Make / Model: Stenner VHJ, machine size 105 • Serial number: AB 7508 • Motor: 18.5 kW MEZ three-phase motor (type C180M04), 400V • Braking: Fitted with electric motor braking for fast blade run-down, in line with UK PUWER requirements for woodworking machinery • 3-phase supply required Condition Fully operational. Last serviced 30 March 2026, with the next service not due until March 2027. Maintenance history • Regular documented safety inspections every year since 2016 • Professional servicing by specialist engineers, including services in 2022, 2023, 2024 and March 2026 • Wheels professionally refaced on site by Perman Stanley Ltd (saw pulley refacing specialists) in April 2023, with alignment and setup checked • Further service in December 2023 • Service and repair in April 2024 Dodpfoz E Hknex Al Ajwc Copies of the service invoices are available to serious buyers. The written pre-operation checks, start-up and shutdown procedure, and safe operating procedure can be passed on with the machine. Included A number of sharpened blades, so the saw is ready to cut straight away. Collection Collection only. The buyer arranges transport and lifting equipment. (Assistance can be provided with removal, lifting and loading) Viewing welcome by appointment, and you're welcome to see it running under power. Please ask any questions before bidding.

Condition: used, mileage: 629,061 km, power: 335 kW (455.47 HP), first registration: 03/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 04/2027, brakes: retarder, color: black, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Cab & Comfort* L StreamSpace cab (2.30 m wide, 170 mm tunnel) * Comfort driver's seat with massage function * Co-driver's functional seat with armrests * Comfort lower bed with PremiumComfort mattress * Comfort upper bed * Automatic climate control * Auxiliary water heater, additional thermal insulation * Electric auxiliary air conditioning * Ambient lighting * Sun blinds, curtains, storage compartment covers, and drawers * Electric sliding/lifting sunroof (glass) * Refrigerator in drawer under the bed * Leather steering wheel, interior color almond beige, chrome interior package * Central locking and comfort function ----Electrical System & Multimedia* Radio with USB connection * Bluetooth hands-free system * Multifunction steering wheel * 2-way speaker system * CB radio, 24 V * Instrument cluster, 12.7 cm, with additional displays * MB FleetBoard * Digital tachograph * Truck Data Center ----Safety & Assistance Systems* Electronic braking system with ABS and ASR * Disc brakes on front and rear axles * High Performance Engine Brake * Secondary water retarder * Stability control assistant (ESP) * Roll stability assistant * Lane keeping assistant * Distance keeping assistant * Attention assistant * Turning assistant * Active Brake Assist 4 * Tire pressure monitoring * Cruise control and speed limiter * Rear warning system ----Lights & Visibility* Bi-Xenon headlights * LED daytime running lights * Fog lights * LED taillights * Lower work lights * Headlight cleaning system * Rain/light sensor * External sun visor (transparent) * Tinted windshield, weight-optimized * Heated mirrors * Dura-Bright aluminum rims, Alcoa ----Chassis & Drive* Engine: OM470, R6, 10.7 l, 335 kW (455 hp), 2200 Nm, Euro VI * Transmission: G 211-12/14.93-1.0, Mercedes PowerShift 3 * Clutch: Single-plate clutch * Axle ratio: i = 2.733 * Suspension: Air suspension on rear axle, front spring 7.5 t (1-leaf) ----Additional Equipment & Features* Saddle coupling SAF GF SK-S 32.14 * NA MB 131-2c, pump with hydraulic system * LOF approval ----* Tire size: 315/80R22.5 * Fuel tank: 300 liters Dwodjz N Ri Repfx Al Ajc * AdBlue tank: 25 liters * Technical gross weight: 18000 kg * Unladen weight: 6974 kg * Permissible trailer load: / * Overall length: 5850 mm * Wheelbase: 3700 mm * Next inspection due: 10.2026 ----Vehicle number/Vehicle: 12478----Errors and prior sale excepted----Advertisements and various inscriptions have been digitally removed. We will be happy to assist you with all formalities that arise when purchasing a vehicle. Just let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge: ----Trade-in of your old vehicle TÜV/SP inspection Complete export processing Arrangement of financing Application for export license plates Vehicle transport Vehicle registration Salvage and vehicle transport ----YOUR VTS TEAM

Condition: ready for operation (used), Year of construction: 2012, travel distance X-axis: 900 mm, controller manufacturer: HEIDENHAIN, number of axes: 3, This 3-axis ZEISS Prismo Navigator 7 was manufactured in 2012. It features a maximum permissible error of 0.9 + L / 350 µm, ensuring high precision in measurements. If you are looking to get high-quality coordinate measuring capabilities, consider the ZEISS Prismo Navigator 7 CMM machine we have for sale. Contact us for further details. Dwodpfxoz Hk Rhe Al Aec - Axis Travel / Measuring Range (X / Y / Z): 900 mm / 1500 mm / 700 mm- Maximum Permissible Error (E 0, MPE): 0.9 + L / 350 µm- Calibration Date: 16.05.2023- Next Inspection Expiry: 2023-10- Testing Body: 3D Lasertec GmbH, Aalen, Germany- SKU: AT-MEA-ZEI-2012-00001- Additional Components: Control console with twin joysticks, PC workstation, stylus rack/changer system, calibration sphere

Condition: used, maximum load weight: 18,470 kg, overall weight: 26,000 kg, axle configuration: 2 axles, first registration: 12/1995, next inspection (TÜV): 04/2027, loading space length: 10,959 mm, loading space width: 2,486 mm, loading space height: 582 mm, total length: 11,800 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, * 4 folding sideboards per side * Loading area with wooden floor * Winch * Hydraulic loading ramp with unit * SAF axles (twin tires) * Drum brake * Chocks * Storage box * All-round lights * Fixed front wall ----* Tire size: 235/75R17.5 * Technical total weight: 26000 kg * Tare weight: 7530 kg Djdpez N Rkusfx Al Aewc * Overall length: 11800 mm * Next inspection date: 10.2026 ----Vehicle number: 12553----Errors and prior sale excepted----Advertisements and various inscriptions have been digitally removed.-----We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of everything. Among other things, we can offer you the following services for an additional fee:----Trade-in of your old vehicle, TÜV/inspection acceptance, complete export processing, arrangement of financing, application for export license plates, vehicle transport, vehicle registration, recovery and vehicle transport. ----?YOUR VTS TEAM

Condition: used, maximum load weight: 12,560 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 08/2019, next inspection (TÜV): 05/2027, total length: 9,630 mm, total width: 2,550 mm, total height: 3,600 mm, Equipment: ABS, tail-lift, * EWERS beverage racking system * Side walls, divided into 2 sections, for folding up * BÄR tail lift * Additional crank supports at the rear * Fixed front wall * Storage box ----* Krone axles with disc brakes ----* Tire dimension: 385/65R22.5 * Technical total weight: * Tare weight: 5440 kg * Overall length: * Next inspection due: 11.2026 Dedpfx Aozvk Unel Aswc ----Vehicle number: 12386----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We will be happy to assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee:----Trade-in of your old vehicle, TÜV/main inspection, complete export processing, arranging financing, applying for export license plates, vehicle transport, vehicle registration, recovery and vehicle transport.----?YOUR VTS TEAM