Used Geba Baier 49/25 for sale (16,446)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 10,000 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 550 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 450 mm Travel range, B-axis: -110 to +110° Travel range, C-axis: 360° Distance, pallet surface to spindle center line: -20 to 430 mm Distance, B-axis center to spindle center line: -40 to 410 mm Distance, B-axis center to spindle center line: -20 mm Distance, pallet center to Z zero point: 265 mm Distance, pallet center to Y zero point: 180 mm Gksdpfx Aoz D Taaekyec Pallet Work area on the pallet: Ø 130 mm Pallet load capacity: 40 kg Max. workpiece size: Ø 250 × 250 mm Pallet mounting surface: 4 × M12 × 1.75 Distance, pallet bottom to pallet surface: 970 mm Pallet indexing, B/C-axis: 0.001° / 0.001° Pallet change time, B-axis: 1.2 s/90° Pallet change time, C-axis: 0.9 s/90° Pallet change time, C-axis: 1.2 s/180° Pallet change time, C-axis: 1.4 s/270° Pallet torque, B-axis: 1,070 Nm Pallet torque, C-axis: 192 Nm Pallet braking torque, B-axis: 1,112 Nm Pallet braking torque, C-axis: 500 Nm Spindle Spindle speed: 50 to 15,000 rpm Spindle speed change: 5-digit direct S-command Tool holder: SK 40 Spindle taper: 7/24, taper No. 40 Inner diameter of spindle bearing: 70 mm Max. spindle torque: 65.1 Nm at 1,100 min⁻¹ Spindle air blow: Standard Spindle alignment: Standard Tool clamping force: 7.0 kN Tool changer Tool magazine capacity: 240 positions Tool shank: JIS B 6339, tool shank 40T Pull stud type: JIS B 6339, pull stud 40P Max. tool diameter: 80 mm Max. tool diameter with free secondary stations: 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg Tool selection: Fixed address system Tool change arm: W-gripper type Feed rates Rapid traverse, X/Y/Z-axis: 50 m/min Rapid traverse, B-axis: 30 min⁻¹ Rapid traverse, C-axis: 50 min⁻¹ Feed rate, X/Y/Z-axis: 1 to 50 m/min Feed rate, B-axis: 30 min⁻¹ Feed rate, C-axis: 50 min⁻¹ Rapid traverse acceleration, X/Y/Z-axis: 0.6 G Rapid traverse acceleration, B/C-axis: 2,500 / 2,000 °/s² Max. acceleration during cutting feed, X/Y/Z-axis: 0.4 G Max. acceleration during cutting feed, B/C-axis: 2,000 / 4,000 °/s² Dwell feed rate, X/Y/Z-axis: 0 to 4000 mm/min Dwell feed rate, B/C-axis: 0 to 11.11 min⁻¹ Min. motion increment, X/Y/Z-axis: 0.001 mm Min. motion increment, B/C-axis: 0.001° MACHINE DETAILS Control: MATSUURA G-TECH 840 DI Serial number: 350536 Electrical connection values Rated apparent power: 36 kVA Input voltage: 415 V Input frequency: 50 Hz Input current: 50 A Dimensions and weight Overall length: 6,000 mm Overall width: 5,000 mm Overall height: 3,500 mm Overall weight: 15,000 kg EQUIPMENT Chip conveyor Coolant system Tool holders in the tool changer External reference: Hanon - Lot 1

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 2,800 mm, total width: 3,500 mm, table load: 6,500 kg, overall weight: 16,400 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 24,000 W, product length (max.): 5,200 mm, number of axes: 4, This 4-axis ANAYAK CORREA XPERTA 25 was manufactured in 2015. It features an impressive X-axis travel of 2,500 mm, Y-axis travel of 1,000 mm, and Z-axis travel of 1,000 mm. The machine includes a robust table size of 2,800 × 1,000 mm and a maximum table load of 6,500 kg. If you are looking to get high-quality machining capabilities, consider the ANAYAK CORREA XPERTA 25 vertical machining centre we have for sale. Contact us for further details. • Table size: 2,800 × 1,000 mm Gsdpfxsz I Rime Akyekc • Spindle torque: 286 / 382 / 840 Nm • Rapid traverse X/Y/Z: 25 m/min • Universal indexed head: 2.5° • Through-spindle coolant (CTS): 30 bar • Machine dimensions / footprint: 5,200 × 3,500 × 2,800 mm Additional equipment • Chip conveyor Technical Specification Taper Size ISO 50

Condition: good (used), Year of construction: 2008, fuel type: electric, fork length: 1 mm, Empty weight: 4.585 kg Lifting capacity: 2.500 kg CE mark: yes Technical condition: good Visual appearance: good Transport dimensions (LxWxH): 2,38x1,3 Production country: DE Please contact Christian Theißen for more information Manufacturer: Still Model: RX 60-25 Year of build: 2008 Condition: Used Data: Max. lifting height: 3,65 m Max. Lifting capacity: 2500 kg Length forks: 1,25 m Drive type: Electric Domensions LxW (without forks): 2,38 x 1,30 m Building height: 2,73 m Godpfjx Hhcgsx Akyjkc Own weight: 4.585 kg Special features: Side slider, protective roof, windshield Location: 41468 Neuss immediately available

Condition: excellent (used), Year of construction: 2011, Robust, Right-Sized Packaging System Automated machine for cardboard packaging, Cardboard cutting machine, Cardboard die-cutter, Cardboard manufacturing machine Packsize EM7-25 MT, year of manufacture 2011 Weight EM7-25: 4,500 lbs EM7-35: 5,500 lbs Gjdoz Ig E Rspfx Akyskc Footprint with Bales EM7-25: 15' 8" x 10' 2" EM7-35: 15' 8" x 13' 5" Unlimited number of cardboard sizes and styles 15’ 8″ x 13’ 5” Fully-loaded footprint Max. 4 plies of corrugated cardboard in various grammages The EM7-25™ is a patented, automated machine for the “On-Demand Packaging” process, designed for use in a wide range of industries. The EM7-25™ system, developed in Sweden, offers a range of advanced features for cardboard production, including longitudinal and transverse cutting, scoring, perforating, and die-cutting of handles and openings. The machine supports the “Lean Packaging” concept and also enables material feed in the reverse direction (so-called *Back-Feeding*), allowing for an unlimited variety of cardboard designs that are precisely tailored to the respective product dimensions. The EM7-25™ model can be seamlessly integrated into the PackNet.Server® software, which is used for production control and process optimization. This provides those responsible for the packaging process with the necessary tools and analysis data to efficiently coordinate and control both single and series production, as well as highly complex processes in the manufacture of corrugated cardboard packaging. A configurable user interface provides easy access to local reports on machine operation and is controlled via an integrated control panel.

Condition: used, Year of construction: 1990, Fixed Bed Milling Machine CORREA A25/25 Travel X: 2500 mm Travel Y: 1200 mm Travel Z: 1000 mm CNC HEIDENHAIN TNC 355 Gjdpfx Aksz Nxx Tsyskc Spindle: SA 50 Spindle motor: 30 CV Spindle speed: from 2 to 3000 RPM Table size: 3000 x 1000 mm Year of construction: 1990 Maxi eligible load on table: 7 T Manual Swivel Head Voltage: 380 V Dimensions (L x W x H): 5000 x 3000 x 3000 mm Weight: 16,5 T

Condition: used, Year of construction: 1998, Technical details: sheet width: 2540 mm plate thickness: 5,0 mm distance between columns: - mm rated current: 28,91 A total power requirement: 13,52 kW control voltage: 230 V connection voltage: 400 V upper bending cheek adjustment: 350 mm knife length: 2540 mm bending angle max.: 135 ° Weight approx.: 5950 kg dimension machine approx.LxWxH: 3,81 x 2,80 x 2,05 m Gkodpfx Asz Hixqokysc

Condition: reconditioned (used), functionality: fully functional, pillar drill for metal Gkedpfxjz Dp Aqs Akyjc

Condition: used, 1 unit of IXION BT 25 STPF drilling and milling machine with various accessories Color: as shown in the pictures, according to the images and upon inspection Condition: used Location of the goods: workshop Payment method: prepayment via bank transfer Gkjdpfoz I Nkcsx Akyec Shipping: Self-collection only from the location in Bischofswiesen

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, input frequency: 50 Hz, input voltage: 400 V, pressure: 6 bar, LiSEC, KSR-25, Right – Left, year 2010 Vertical Glass Edge Seaming Machine, h=2,50 m Gsdpfev Eguyox Akyjkc Vertical compact grinding machine for the seaming of glass sheets on all four sides in a fully automatic cycle. Inspection during production is possible by appointment. In very good working condition. Available: March / April 2025.

Condition: used, Year of construction: 1982, functionality: fully functional, pressing force: 90 t, stroke length: 100 mm, operating speed: 7 mm/s, reverse speed: 80 mm/s, overall weight: 5,000 kg, CNC Hydraulic Press Brake Brand: Mebusa Model: PH 90-25 Year: 1982 Gedpjx Scv Eefx Akyjkc Weight: 5,000 kg Mebusa/Mecos control, model M202 *Capability to create programs with multiple steps. Bending length: 2,500 mm Force: 90 tonnes Axes: 2 (Y, X) Throat depth: 400 mm Stroke: 100 mm Approach speed: 45 mm/sec Working speed: 7 mm/sec Return speed: 80 mm/sec Delivered with: - New four-sided mono-V die (V16 mm, V22 mm, V32 mm, and V50 mm) in 835 mm sections - Set of punch tools for 2,500 mm at 35 degrees - Various batches of Promecam punches, 90 degrees (see photos of punches on pallet)

Condition: good (used), functionality: fully functional, Year of construction: 2008, operating hours: 5,800 h, fuel type: diesel, Equipment: all wheel drive, Diesel All-Wheel Drive Articulating Boom Lift GENIE Z 45/25 Year of manufacture: 2008 According to meter reading: 5,800 hours 🏗️ Performance Data & Working Range Gksdpfxjz Iv Hwo Akyoc • Maximum working height: 15.70 m to 15.97 m (Model J with basket boom reaches up to 16.05 m) • Maximum platform height: 13.90 m to 14.05 m • Maximum lateral reach: 7.50 m to 7.52 m (Model J with basket boom up to 7.65 m) • Maximum lifting capacity: 227 kg (approved for 2 people + tools) • Turret swivel range: 359° (not continuous) • Platform rotation: 180° hydraulic (160° on models with basket boom) 📐 Dimensions & Weight • Transport length: approx. 5.56 m (Model J with folded basket boom approx. 6.65 m to 6.83 m) • Transport width: 2.29 m (with standard off-road tires) • Transport height: 2.11 m to 2.13 m • Wheelbase: 2.03 m • Ground clearance: approx. 18 cm to 24 cm • Operating weight (4x4 RT): approx. 6,078 kg to 6,460 kg (depending on tire filling, e.g. foam-filled) ⚙️ Drive & Off-Road Capability (4x4) • Drive type: All-wheel drive (4x4 / RT = Rough Terrain) with diesel engine (usually Deutz or Perkins) • Maximum gradeability: 45% (in retracted position) • Travel speed (retracted): up to 7.7 km/h • Travel speed (elevated): approx. 1.0 km/h • Tires: 14-17.5 / Off-road profile (often foam-filled to prevent punctures) • Fuel tank capacity: approx. 54 to 64.4 liters • Hydraulic tank capacity: approx. 83 to 95 liters - Immediately ready for operation in original condition! - Upon request, a new Austrian inspection certificate can be provided before delivery! Selling price: €13,900 net Affordable delivery also possible!

Condition: used, machine/vehicle number: W09WBH218A1KB3462, Year of construction: 2010, Information: - 2-in-1 (combination unit): Top-of-the-line equipment = hydraulically adjustable fifth wheel coupling for maneuvering trailers + provision for interchangeable platforms. Defects (see pictures): - Age-related signs of wear - Rust on the frame and fifth wheel coupling - Driver's seat cushion torn on the side Gsdez I Rg Ejpfx Akyjkc

Condition: used, mileage: 684,266 km, power: 220 kW (299.12 HP), first registration: 11/2008, fuel type: diesel, number of seats: 49, gearing type: automatic, next inspection (TÜV): 11/2026, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis, subject to finalization, errors, typographical errors, and prior sale: Mercedes Benz Citaro O530 LE 13m (49+45+1+2 emergency seats) (Vehicle 126) First registration: 27.11.2008 684,266 km Engine: 11,967 ccm 220 kW / 300 hp Bluetec 5 EEV MOT valid until 11/2026, TÜV (technical inspection) valid until 11/2026 Permissible total weight: 19,000 kg, unladen weight: 11,600 kg, payload: 7,400 kg Overall length: 13,070 mm x overall width: 2,550 mm x overall height: 3,400 mm Tires: 275/70R22.5, front approximately 80%, rear approximately 40/40% Double doors at the front and rear Driver's cab with door Ramp Fully automatic transmission Microphone Retarder Electric windows 2 x electric and heated mirrors Auxiliary heater + 2nd heater Stop brake 49+51+1+2 emergency seats Emergency exit 12-volt socket LAWO MOBITC ICU 400 Frame with some rust 15.07.2024: Right front axle, brake caliper replaced; 16.08.2024: Water filter + expansion tank replaced; 24.11.2024: Axle modulator replaced; 29.11.2024: E-circuit safety valve replaced; 14.04.2025: Water filter changed; 30.07.2025: Water box replaced, engine + water filter flushed Gsdpfx Aoz H Edvekyekc Various signs of wear and tear, commensurate with age Last inspection on 10.10.2025 at 655,348 km, next inspection at 715,348 km Price: 5,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to €10,000 is the local court of Ludwigslust; for disputes exceeding this amount, it is the regional court of Schwerin. Errors, typographical errors, and prior sale are reserved.

Condition: refurbished (used), Year of construction: 2018, operating hours: 2,049 h, load capacity: 2,500 kg, lifting height: 122 mm, load center: 575 mm, fuel type: electric, mast type: simplex, construction height: 1,400 mm, battery voltage: 24 V, fork length: 1,150 mm, empty load weight: 443 kg, FRIEDMANN FORKLIFTS – PROFESSIONALLY REFURBISHED BY EXPERTS. FOR PROFESSIONAL USE. Our forklifts are technically overhauled according to FEM-4.004 and the latest safety standards—ensuring maximum quality and your safety. From the chassis to the battery, including drive system, brakes, steering, and electrics—every vehicle is thoroughly inspected and reconditioned. ? Made in Germany – with responsibility and precision ? Rigorous technical inspections ? 400+ vehicles available ? Worldwide shipping & customs clearance ? Service & spare parts at fair prices ? Personal support – even after purchase Test on-site now and get expert advice – we’ll find the right solution for you. Industrial Truck Data: Manufacturer: Jungheinrich Model: Pedestrian Pallet Truck ERE 125 Drive type: Electric Load capacity: 2,500 kg Year of manufacture: 2018 Operating hours: 2,049 Lift height: 122 mm Mast type: None Initial lift: Yes Overall height: 1,400 mm Fork length: 1,150 mm Gedpfxjy Rq Sfj Akyskc Unladen weight: 443 kg Load centre: 575 mm Tyres: Polyurethane Model type: ERE 125 Battery type: PzS Voltage: 24 V Battery weight: 288 kg

Condition: used, functionality: fully functional, Year of construction: 2016, load capacity: 2,500 kg, Fork positioner ISO class: ISO class 2 = 1,000 - 2,500 kg Gkjdpfjz R Ht Uox Akysc Condition: Ready for use and fully functional Technical condition: good Description: ISO 2A (41 cm) Capacity 2500 kg Opening range 490-1060 mm Width 1100 mm Clamps 1600 mm ID OS2145

Condition: good (used), Sputter target, tube, pipe -Pipe dimensions: Outer: Ø 152 mm Inner: Ø 125 mm Total length: 3249 mm Gkodpfxjb Ilw Us Akyec -Number: 2 pipes available -Price: Complete -incl. transport crate -Box dimensions: 3600/570/H585 mm -Weight: 306 kg

Condition: used, Radial Drilling Machine BERGONZI type UT 25 Spindle: CM3 Spindle exit: 150 mm Spindle speed: from 130 to 900 RPM Arm travel: 500 mm Max height table/spindle nose: 900 mm Column: Ø 180 mm 2 speeds motor Gksdpfxsz Nxtko Akyoc Auto descent Return Spring defective Electric arm rise Delivered with: 1 cube Length 500 mm x Depth 400 mm x Height 450 mm 1 false table Lubricant pump Voltage: 380 V Length: 1500 mm Width: 900 mm Total height in height position: 2300 mm Weight: approx 1,2 T

Condition: used, mileage: 854,993 km, power: 220 kW (299.12 HP), first registration: 05/2009, fuel type: diesel, number of seats: 49, gearing type: automatic, next inspection (TÜV): 03/2027, emission class: euro5, color: white, Equipment: ABS, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis until a contract is concluded, subject to errors, typographical errors, and prior sale: Mercedes Benz Citaro O530 G 18m (49+101+1+2 emergency seats) (Vehicle 736) Registration date: 05/29/2009 854,993 km Gkedpfoz H Ed Ajx Akysc Engine: 11,967 ccm 220 kW / 300 hp Euro 5 EEV MOT valid until 03/2027, technical inspection valid until 09/2026 Permissible total weight: 29,000 kg, unladen weight: 16,780 kg, payload: 12,252 kg Overall length: 17,940 mm x overall width: 2,550 mm x overall height: 3,100 mm Tires: 275/70R22.5, front approximately 90%, center approximately 50/50%, rear approximately 90/90%, rear approximately 60/60%, rear inside approximately 40/40% Double doors at the front, middle, and rear Driver's cab with door Ramp, 2nd double door Retarder activated via the brake pedal Fully automatic transmission Microphone Manually operated windows 2 x electric and heated mirrors Auxiliary heater + 2nd heater LAWO system via cash register ISRI driver's seat with heating + ventilation 49+101+1+2 emergency seats Emergency exit 12-volt socket Frame with some signs of rust 06/26/2024: Tie rod on the right side replaced 08/06/2024: Door 3 pressure wave switch replaced 12/16/2024: Alternator belt tensioner replaced, front axle brake pads + discs replaced, C-axle brake pads replaced, right-hand side C-axle caliper guide + combination cylinder replaced, left-hand side C-axle brake cylinder replaced 01/28/2025: Coolant expansion tank replaced 06/20/2025: Cylinder 1 exhaust manifold screw replaced 12/03/2025: Hose to the water pump replaced, steering hose replaced 12/16/2024: Diagonal arm on the left C-axle replaced 12/12/2025: Right-hand side C-axle position sensor + bracket replaced, ECASD calibrated 12/03/2025: Tie rod on the left side replaced, air spring on the B-axle right front + air spring on the C-axle left rear replaced, B-axle left and right brake caliper guide and brake pads replaced 06/06/2026: Axle trunnion cover on the front axle left upper replaced Various signs of wear and tear, consistent with age Last inspection on 03/06/2026 at 840,000 km, next inspection at 900,000 km, next inspection at Price: 10,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. For both parties, the place of jurisdiction for disputes up to a value of €10,000 is the district court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors, typographical errors, and prior sale.

Condition: used, tool diameter: 25 mm, drilling depth: 180 mm, actuation type: manual, rotational speed (max.): 1,510 rpm, table width: 390 mm, table length: 2,080 mm, Brand: Erlo Gedey Av Ebjpfx Akyekc Model: TC-25 (3 units) Transmission: Gear-driven Feed: Manual Capacity: 25 mm Drilling depth: 180 mm Morse taper: 3 Speeds: 8 (96 - 1510 rpm) Coolant system. Table dimensions: 2080x390 mm Minimum distance from drill chuck to table: 300 mm Maximum distance from drill chuck to table: 700 mm Drill with manual elevation. Drill elevation travel: 400 mm

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 1000021766, Intermac VERTMAX 2.6 – Vertical CNC Glass Processing Centre with LiSEC WTL-25 Vertical Glass Washing Machine Vertical Intermac VERTMAX 2.6 CNC glass processing centre equipped with one front working spindle and one rear spindle. The machine has a total capacity of 37 tools, with 18 positions in the front tool magazine and 19 positions in the rear tool magazine. The offer also includes a LiSEC WTL-25 vertical glass washing machine equipped with six brushes, pre-washing, washing and drying sections. The washer is fitted with soft brushes suitable for Low-E glass. Gjdpfjz Il Uqsx Akyskc Key Specifications of the CNC Centre: - Manufacturer: Intermac - Model: Vertmax 2.6 - Serial number: 1000021766 - Year of manufacture: 2018 - Total weight: 12,500 kg - Maximum glass size: 5,000 × 2,600 mm - Minimum glass size: 500 × 300 mm - Glass thickness: 4–26 mm - Total tool capacity: 37 - Front tool magazine: 18 tools - Rear tool magazine: 19 tools Vertical Glass Washing Machine: - Manufacturer: LiSEC GmbH - Model: WTL-25 - Serial number: 311-057906 - Year of manufacture: 2010 - Maximum glass washing height: 2,500 mm - Minimum glass size: 350 × 180 mm - Glass thickness for washing: 3–15 mm - Transport speed: 4–8 m/min - Number of brushes: 6 - Pre-washing, washing and drying sections - Soft brushes for Low-E glass A set of spare parts is included with the machines, together with an approximate valuation of the parts.

Condition: used, Year of construction: 2024, load capacity: 2,500 kg, lifting height: 4,330 mm, total length: 4,250 mm, · Lastabstand, Mitte der Antriebsachse bis zur Gabel: 621 mm · Vorderachslast (beladen) / Hinterachslast (beladen) 5970 kg / 820 kg · Vorderachslast ohne Last / Hinterachslast ohne Last 1780 kg / 2510 kg · Vorderspur 1159 mm · Abstand zwischen den Hinterrädern 1176 mm · Höhe Schutzdach (Kabine) / Gesamthöhe mit niedrigem Fahrerschutzdach (Buggie-Ausführung) 2155 mm / 1990 mm · Sitzhöhe 1094 mm · Wenderadius 3405 m · Fahrgeschwindigkeit (beladen / unbeladen) 12 km/h / 24.50 km/h · Hubgeschwindigkeit (beladen / unbeladen) 0.47 m/s / 0.46 m/s · Absenkgeschwindigkeit (beladen / unbeladen) 0.50 m/s / 0.30 m/s · Zugkraft 3100 daN · Steigfähigkeit - beladen 51 % · Festellbremse: Hydraulik bremst durch Druckverlust · Motornorm: Stage V · Motorleistung gemäß ISO 1585: 37 kW · Nenndrehzahl 2700 rpm · Anzahl der Zylinder / Tragfähigkeit der Zylinder 3 - 1826 cm³ Gksdpfx Akjz R Ebwoysc · Steuerung Elektronisch · Arbeitsdruck Zusatzsteuerkreis für Anbaugeräte 200 bar · Ölmenge für Anbaugerät 42 l/min

Condition: used, work height max. 650 - 940 mm filling amount 15 l speed 35 m/min profile width max. 32 / 16 mm profile width min. 5 mm Frame size min. 120 / 120 mm Air consumption 50 l/min. Required air-pressure 7 bar total power requirement 3,8 kW weight of the machine ca. 770 kg dimensions of the machine ca. 3,0 x 1,0 x 1,13 m Automatic butyl coating machine LISTEC - LBH-25 VE - with attached corner-filling device - automatic nozzle adjustment 6–24 mm Gksdpez Hz Eisfx Akyoc

Condition: used, functionality: fully functional, Year of construction: 2010, operating hours: 56,377 h, load capacity: 2,500 kg, lifting height: 3,300 mm, free lift: 150 mm, fuel type: gas, mast type: simplex, construction height: 2,150 mm, fork carriage width: 1,020 mm, fork length: 1,600 mm, empty load weight: 3,780 kg, total length: 2,800 mm, drive type: Treibgas, construction width: 1,200 mm, Internal combustion forklift Load center: 500 ISO class: FEM 2 A Mast type: Standard Transmission: Automatic Technical condition: good Front tire type: Superelastic Front tire size: 2 x 7.00-12 Front tire condition: 60 - 80% Godpfx Ajz H E Tkjkyekc Rear tire type: Superelastic Rear tire size: 2 x 6.00-9 Rear tire condition: 80 - 100% Battery year of manufacture: 2010 Dual auxiliary hydraulics, fork positioner with side shift, half cab, Monotrol, gas tank, Blue Spot, front slide, rear window, 2x work lights in front

Year of construction: 1968, condition: good (used), For sale is a Deckel milling machine from 1968. The machine is in good to very good condition and fully functional. Gsdjihf Etopfx Akyskc (No digital display, but one can be additionally installed upon request.) Technical data: Tool holder: SK 40 Travel ranges X/Y/Z: 400 / 200 / 400 mm Spindle speed range: 40 - 2000 rpm Spindle travel, vertical: 60 mm Spindle travel, horizontal: 100 mm Feeds: 8 - 400 mm/rev Table size: 700 x 330 mm Motor power: 2.2 kW Connection: 400 V / 16 A plug Weight: approx. 1300 kg All prices plus VAT. Machine buying and selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website.

Condition: ready for operation (used), Heidenhain QSY 190F EcoDyn SN: 25 342 980 C, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this item. Please ask for price separately! Gkedpou T Uviofx Akysc