Used Gala Underwater Pelletizing System Plastic Processing Machine for sale (89,898)

Condition: ready for operation (used), functionality: fully functional, Vacuum Mixing and Marinating The Vakona ESK vacuum mixer processes meat, poultry, and fish under vacuum. It allows for mixing, massaging, marinating, and tumbling products in a single tank. As such, it is suitable for meat processing plants, processing workshops, and manufacturers of prepared meat products. In particular, it helps to distribute marinades, brines, spices, and other ingredients evenly around the products. The system can process whole pieces or cut products. In addition, the tank performs a controlled movement during the cycle. Depending on the tool installed, the machine performs a gentle mix or a more vigorous massage. Therefore, the operator can adapt the process to the desired texture and the fragility of the raw materials. How does the VAKONA ESK work? First, the operator loads the products and ingredients into the tank. Then, the pump removes air to create the programmed vacuum level. The arm then moves the materials regularly throughout the duration of the cycle. The vacuum facilitates contact between the products and the marinade. Thus, it reduces air pockets and improves the distribution of liquids. In addition, the variable speed allows the movement to be adapted to different recipes. The machine can alternate work, pause, and aeration phases to better control the process. Cooling during the process The ESK range combines vacuum processing with a direct cooling system. An exchanger placed around the tank helps to maintain a stable temperature during mixing or marinating. Thus, the machine limits the heating caused by the movement of the products. This temperature control protects the texture of the raw materials. In addition, it promotes a more consistent process between different batches. Therefore, cooling is of particular interest for sensitive recipes and productions that require a controlled temperature. Recipe control and monitoring VAKONA offers a touch control system capable of storing up to 99 programs in the ESK range. The operator can thus record the parameters specific to each recipe. In particular, it can adjust the speed, duration, pauses, vacuum, and aeration phases. In addition, the system can record process data according to HACCP principles. As a result, the company improves the monitoring of production and more easily reproduces the same settings. An automatic water separator also protects the vacuum circuit during operation. Technical specifications: Manufacturer and range: VAKONA ESK STL Bwsdpfxezpw S Tj Afgeu Functions: vacuum mixing, massaging, marinating, and tumbling Tank volume depending on model: 60 to 1,500 liters Capacity depending on product: 5 to 1,150 kg per cycle Equipment: cooled tank, automatic vacuum pump, touch control with 99 programs and HACCP monitoring SM+EPKZB

Condition: ready for operation (used), functionality: fully functional, The MADO MEW 723 mixing grinder combines mixing and chopping in a single machine. MADO officially classifies it as one of its automatic mixing grinders. It is designed for industrial butcher shops, meat processing plants, and meat processing workshops. It can be used to prepare chopped products, fillings, seasoned mixtures, or bases for sausage production. Its 120-liter hopper is suitable for professional production while minimizing transfers between two separate pieces of equipment. Operation of the MADO MEW 723 The mixing device distributes the pieces of meat, spices, and other ingredients before they pass through the cutting system. The central arm has four mixing profiles. Then, the screw conveyor regularly directs the product towards the cutting system. Bwjdpfx Afozpwftogeu Depending on the configuration, the manufacturer offers, among other options, a five-piece Unger B98 system or an Enterprise size 32 system. Unger D114, E130, or Enterprise E52 systems can also be used in some versions. Therefore, the exact configuration of this machine must be visually confirmed before announcing its cutting system. This arrangement improves the consistency of the recipes and reduces intermediate handling. The operator can thus prepare a uniform mixture before packaging, portioning, stuffing, or shaping. According to the manufacturer, the MEW 723 can also process large pieces and materials that have been hardened by cold. However, the actual permissible temperature depends on the installed equipment and the nature of the product. Therefore, the machine is suitable for lines where the consistency of the mixing and particle size directly influences the final quality. Cleaning and integration into a line The stainless steel frame meets the common requirements of the food processing environment. The manufacturer also provides a reversing function, a rinsing chamber, a removable mixing device, and a removable cutting body. These elements facilitate access to the work areas, cleaning, and maintenance operations. A screw extraction tool is also indicated in the model's documentation. Consequently, teams can more easily organize production changes and maintenance operations. The MADO MEW 723 mixing grinder can be placed after the cutting or preparation of the raw materials. Subsequently, it can feed a stuffer, a former, a portioning machine, or a packaging line. This integration reduces manual steps, improves production continuity, and promotes more consistent quality. However, options such as integrated cooling, a cartilage and nerve separator, a frequency inverter, or a reinforced drive should only be mentioned if their presence is confirmed on the machine. This machine has been reconditioned by Europ'Équipement. Each machine is inspected, cleaned, checked, and tested before being sold to offer a reliable, economical, and durable solution for professionals in the food processing industry. Technical specifications: Manufacturer and model: MADO MEW 723 Year and serial number: 2014 – 20002802 Hopper volume: 120 liters Power supply: 400 V – three-phase – 50 Hz Power, current, and protection: 6.6 kW – 14.6 A – IP54 – CE DQI3QCEH

Condition: like new (used), operating hours: 12 h, KILIA 65 Liter Meister Plus – factory-reconditioned by HELTEK | KILIA For sale is a KILIA 65-liter high-speed cutter / Meister Plus, which undergoes complete factory reconditioning at HELTEK | KILIA. This is not a simple repair or cosmetic refurbishment. The machine is completely disassembled and rebuilt from the ground up, both technically and visually. The goal is to achieve a condition that consistently aligns with the current machine standards of HELTEK | KILIA. The 65-liter cutter is ideal for butcher shops, meat processing plants, and industrial food processing operations. Technical data: Manufacturer: KILIA Model: Meister Plus / High-speed cutter Bowl capacity: 65 liters Batch processing capacity: approx. 46 kg per batch Main motor: 22 kW Knife shaft speed: approx. 50–5,100 rpm Reverse / mixing speed: approx. 50–500 rpm Plate speed: approx. 7–20 rpm Knife and plate drive: continuously variable, frequency-controlled Voltage: 400 V / 50 Hz Total electrical connection power: approx. 28 kW Customer-side fuse: 50 A Control: modern PLC Operation: 7-inch HMI touch panel Central lubrication: yes Scope of the HELTEK | KILIA factory reconditioning The machine is completely disassembled, except for the base frame. As part of the reconditioning, the following work is carried out, among other things: new base plate, professionally welded in machine frame completely refurbished and blasted stainless steel areas refurbished or glass bead blasted base frame with high-quality new powder coating 22 kW main motor new or completely overhauled and certified by Siemens new motor tensioning device made of stainless steel plate shaft drive new or completely overhauled and certified by the manufacturer plate shaft bearing completely new new bearings and new bearing seats for the plate shaft bearing new knife shaft new knife shaft bearing new electronic central lubrication system new wear parts new scrapers, guides and sliding elements made of food-grade blue POM electrical system and control completely new The electrical equipment is also comprehensively modernized: new PLC control new 7-inch HMI touch panel new frequency inverters new contactors and relays new cables and wires new or revised sensors Bwsdpfjz A Ufzsx Afgsu modern safety technology complete rewiring This gives the machine modern control and drive technology with good spare parts availability and high serviceability. Factory-reconditioned instead of just used You will receive the extremely robust basic structure of a proven KILIA cutter, combined with modern control, drive and safety technology. Proven KILIA quality. Modern HELTEK technology. Ready for many more years of production. After completion of the factory reconditioning, the machine is completely inspected and subjected to a FAT – Factory Acceptance Test. Warranty We provide a 6-month warranty on the factory-reconditioned machine in accordance with our terms and conditions. The knife shaft bearing is excluded from the warranty. Inspection and machine acceptance / FAT can be arranged at HELTEK | KILIA. Transportation, installation and commissioning can be offered on request.

Condition: used, Year of construction: 2005, functionality: fully functional, total width: 11,500 mm, total length: 16,500 mm, total height: 4,350 mm, -Cooling section from VMI -Swiveling discharge conveyor -Strip/felt dimensions of approx. 70mm-800mm width -24 cooling fans -Stainless steel dip tank and reservoir -Pallet magazine -Pallet cleaning with extraction system -Drive unit replaced -Chain replaced Bwodsz Eppgopfx Afgou -Transverse conveyor with 2 pallet positions -Hydraulic lifting table -Weighing scale -Various stacking options on pallets, DB Gibo, cardboard packaging, etc. -Other equipment from the production line is also available for sale. Attractive package price possible.

Condition: excellent (used), Year of construction: 2018, The SEPAmatic 3000 C is a machine from the SEPAmatic brand (Modernpack Hoppe GmbH), designed to separate meat from unwanted components such as bone, skin, gristle, or bone splinters. The separator uses a belt-type separation system, well suited to processing a variety of meat and fish raw materials. How does the SEPAmatic 3000 C separator work? Raw material is drawn in between a highly elastic crushing belt and a perforated stainless steel drum, where it undergoes compression and separation. Harder components such as bone and gristle stay on the outer surface of the drum, while soft meat is pressed through the perforations, enabling continuous, precise separation of the desired raw material from unwanted parts. A simple control system, without complicated electronics or electro-hydraulics, ensures reproducible machine settings and stable operation, while quick access to the working components makes routine servicing and maintenance easier. Key advantages of the SEPAmatic 3000 C The SEPAmatic 3000 C stands out for its simple, reliable construction, in which machine settings remain stable despite wear on the working parts. Interchangeable crushing belts — available in a heavy-duty polyurethane version or a lower-cost neoprene version — allow the machine to be matched to the type of raw material processed and to operating budget. The unit on offer is fitted with a 4 mm sieve, and the set additionally includes two 3 mm sieves and two 4 mm sieves, allowing the separation grade to be easily adjusted depending on the recipe. New belts, ready for immediate replacement, are also included with the machine. Technical specifications of the SEPAmatic 3000 C Manufacturer: SEPAmatic (Modernpack Hoppe GmbH) Type: 3000 C Machine number: 197556 Power: 15 kW Bwjdpsztwuiofx Afgeu Power supply: 400 V, 50 Hz Rated current: 30 A Control voltage: 24 V Sieve: 4 mm mesh (set additionally includes 2 x 3 mm and 2 x 4 mm) Belts: new belts included Dimensions (L x W x H): 2650 x 2000 x 2200 mm Application of the SEPAmatic 3000 C separator The SEPAmatic 3000 C is used in meat and fish processing plants, wherever effective separation of meat from bone, skin, gristle, or bone splinters is required. The machine performs well for recovering meat from post-slaughter components for the production of fillings, sausages, and other processed products.

Year of construction: 2018, condition: used, overall weight: 10,000 kg, total length: 2,300 mm, total width: 6,500 mm, total height: 2,400 mm, BUDERUS CNC 235 – CNC Grinding and Machining Center Machining / Spindle 2 machining areas / channels Max. machining length: 150 mm Max. swing diameter: Ø 310 mm Workpiece spindle speed: 0–3,000 rpm Spindle bore: Ø 45 mm Workpiece spindle positioning via C-axis Table speed X/Z: 0–30 m/min Motor Spindle WMZ / DVS Type: GS 205-045/17 Year of manufacture: 2014 Automation Automatic workpiece feed / conveyor system Coolant / Filtration System LIQUI-Filter GmbH Bjdpfx Aozwa Rhjfgewu System: UR1060 / MW260 / Gamma 13 Tank capacity: 2,400 l Year of manufacture: 2015 Cooling System HYFRA gamma 13-F-S Cooling capacity: 13 kW at 32 °C Year of manufacture: 2015 Measuring Technology JENOPTIK post-process measuring technology Year of manufacture: 2018 Supply Data 3 × 400 V / 50 Hz Installed power: approx. 45 kW Compressed air requirement: 15 Nm³/h at 5 bar Control: Siemens SINUMERIK 840D Travel Z-axis: 300 - mm Workpiece diameter over bed max.: 150 mm Weight approx.: 10,000 kg Dimensions (LxWxH) approx.: 2300 x 6500 x 2400 mm Travel X-axis: 1240 - mm Year of construction: 2,018 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: Free loading on truck under power: No

Condition: refurbished (used), Year of construction: 2011, The Multivac R535 forms packs directly from the bottom film, shaping them to match the dimensions of the product being packed, then fills and seals them with top film under vacuum or modified atmosphere (MAP) conditions, significantly extending product shelf life. The entire process — forming, filling, sealing, and cutting the packs — runs continuously on a single production line, delivering high packaging throughput while maintaining consistent pack quality. According to the nameplate data, the unit on offer dates from 2011 and was manufactured to Multivac’s German quality standards. The machine is additionally equipped with an MR625/MR6318 Cross Web Labeller, manufactured by MR Etikettiertechnik GmbH & Co. KG of Enger. The unit provides fully automatic cross web labelling with high-precision label placement across the sealing film and is integrated with the machine’s sealing system, eliminating the need for manual labeling and speeding up the entire packaging process. Key advantages of the Multivac R535 Bedpfsztwq Dox Afgewu The Multivac R535 enables both vacuum and modified atmosphere (MAP) packaging, extending the shelf life of packed food products while preserving their freshness and quality during transport and storage. A film width of 530 mm and a stroke of 360 mm support pack formats up to 160 x 120 mm, and the machine can be flexibly reconfigured for different formats depending on the mold in use. The robust, industrial-grade construction from this German manufacturer, together with Multivac’s proven technology, ensures reliable operation and highly consistent packaging quality — a key factor for plants running high-volume food production. An additional advantage is the integrated MR625/MR6318 Cross Web Labeller (Multivac Group – Marking & Inspection), combining fully automatic cross web labelling with high-precision label placement and integration with the sealing system, which reduces the amount of manual work on the packaging line and streamlines the labeling of finished packs. Technical specifications of the Multivac R535 Manufacturer: Multivac Machine type: Roll-fed thermoformer (Verpackungsmaschine) Model: R535 Machine number: 140005 Year of manufacture: 2011 Power supply voltage: 400 V Frequency: 50 Hz Number of phases: 3/N/PE AC Rated power: 27 kW Rated current: 67 A Maximum protection (fuse): 80 A Film width: 530 mm Stroke: 360 mm Pack format dimensions: 160 x 120 mm Labeler MR625/MR6318 – Cross Web Labeller, MR Etikettiertechnik Labeler model: MR625 OP6318LS570K15 Labeler features: Fully automatic cross web labelling, high-precision label placement, integrated with sealing system Labeler machine number: 29431/10 Labeler year of manufacture: 2010 Labeler power supply: 230 V, 50 Hz, 1000 VA Application of the Multivac R535 thermoformer The Multivac R535 is used across the food processing industry, including meat, poultry, and fish processing, as well as the production of cold cuts and other products requiring vacuum or modified atmosphere packaging. The machine performs well both on high-throughput production lines and in plants with a varied product range, where flexibility in pack format selection matters.

Condition: good (used), Year of construction: 1994, Short/ Nest Line Bodoh Dxgzjpfx Afgowu Capacity - 400 kg/h 1. Silo - cyclone 2. Big silo 3. small silo 4. Mixer 5. Extruder 6. Chain with dough buckets 7. Dryer 8. output transporter 9. Chain conveyor for buckets - 2 pcs 10. Elevator (at the end of the line) 11. Trans, strip of finished product 12. Comand pult 13. El Cabinetsž NOTE - Action price - 30.000 EUR

Condition: excellent (used), functionality: fully functional, We offer the Vortex D2 Mono – a fully automatic cook, quench & chill machine designed for the continuous and repeatable cooking, quenching, and chilling of food products. This solution features a MONO design, in which the cooking section is mounted on a separate frame from the quenching and chilling sections, ensuring a very high level of separation between high-temperature and low-temperature processes. The Vortex D2 Mono model was developed primarily for processing short and long pasta, but thanks to its versatility, it is also ideal for products such as rice, noodles, legumes, grains, vegetables, potatoes, and seafood. As a result, the machine can operate in both pasta and ready-meal production facilities, as well as in modern convenience food plants and among producers of salads and chilled components. The Vortex D2 Mono has a capacity ranging from approximately 250 kg/h to 4000 kg/h, allowing the system to handle both medium and very high production volumes. The Vortex is equipped with a programmable Vortex water flow system, which ensures uniform cooking, cooling, and chilling of each product batch. This system minimizes clumping, product damage, and yield losses, and its highly efficient cooling typically achieves a product temperature of approximately 3°C. The Vortex D2 Mono can operate with conveyor feeding or with automatic batch loading of product into containers, which facilitates precise control of throughput and process organization. Additionally, vibrating dewatering conveyors enable operation in both batch and continuous modes, allowing the line to be easily adapted to subsequent production stages such as mixing, dosing, packaging, or final cooling. Also noteworthy are design solutions that enhance process quality and hygiene, such as hydraulic basket lifting, shell-and-tube heat exchangers, double degreasing overflows, and specially shaped water tanks. Hygienic, stainless steel construction and washdown-ready protection, which is of great importance in facilities operating under high sanitary standards. Key advantages of the Vortex D2 Mono separate frames for the cooking and cooling sections, high-quality separation of high- and low-temperature processes, Bjdey Df Nropfx Afgowu ideal for short and long pasta, as well as rice, vegetables, potatoes, grains, pulses, and seafood, capacity up to 4000 kg/h depending on configuration, programmable Vortex water flow system, highly effective product cooling to approximately 3°C, capability for batch and continuous operation, hydraulic basket lifting and efficient drainage, hygienic, industrial design for continuous operation. Vortex D2 Mono is an advanced production line for manufacturers seeking consistent cooking, rapid cooling, high throughput, and excellent final product quality in a modern pasta and convenience food production process

Condition: used, Year of construction: 2002, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 380 V, Used Dominioni Punto & Pasta P 55 pasta processing machine, manufactured in 2002. Manufacturer: DOMINIONI PUNTO & PASTA SAS Model: P 55 Serial number: 662 Bwjdpfx Afjzzmg Rogsu Year of manufacture: 2002 Voltage: 380 V Power: 3 kW Condition: Used The machine is in good working condition and is suitable for professional pasta production. For further information, additional pictures or videos, please contact us.

Condition: used, Year of construction: 2009, We offer for sale 5 professional FESSMANN cooking chambers designed for intensive use in meat processing plants. Each chamber holds 2 trolleys, ensuring high steaming efficiency. The chambers are equipped with NESS Digitronic 4 electronic controllers, allowing precise setting of temperature and time parameters. The stainless steel construction guarantees easy hygiene maintenance and a long service life. Technical specifications: Manufacturer: FESSMANN Year: 2009 Number of chambers: 5 Bwodoxfizxspfx Afgsu Number of chambers trolleys: 2 trolleys Control: NESS Digitronic 4 Dimensions: Width 150 cm, Depth 220 cm, Height 240 cm Intended use: steaming meat products Condition: very good, used Construction: stainless steel The ideal solution for medium and large meat processing plants looking for reliable, high-efficiency steaming chambers.

Condition: good (used), Year of construction: 2001, For sale is a Kolbe SW-98 meat grinder, manufactured in 2001, in good and fully functional condition. Bwjdpfxszxqfxs Afgju The unit operates on 400 volts, 6.9A. It is made entirely of stainless steel and features a 5-piece cutting system (Unger). The machine has been workshop-tested and is ready for immediate use. Payment in cash or by advance payment. Sale is only to commercial businesses. No guarantee, no warranty.

Condition: excellent (used), Year of construction: 2020, ACSYS Model: BARRACUDA® Custom Dual FL70S ACSYS Laser Processing System BARRACUDA® Custom Dual FL70S Fiber Laser – Industrial Laser System – Year of Manufacture 2020 For sale is a high-quality ACSYS laser processing system, model BARRACUDA Custom Dual FL70S, manufactured in Germany. The machine is in a very well-maintained condition and is a professional industrial system for precise laser marking, engraving, and material processing. The system is equipped with two air-cooled fiber lasers (2×70 W), making it ideal for series production, industrial marking, engraving, labeling, and processing of complex components. Thanks to its stable granite axis construction and fully enclosed safety cabin, the machine operates with the highest precision, reliability, and safety (Laser Class 1). Perfect for use in industry, metalworking, automotive suppliers, toolmaking, electronics, nameplates, DataMatrix codes, barcodes, serial numbers, and much more. Capabilities: - High-precision laser engraving and laser marking on metal and various materials - Series marking, nameplates, QR / DataMatrix codes, logos, numbering - Processing large layouts without misalignment (Large Field Removal Option) - 3D component processing possible - Camera positioning system for precise workpiece alignment - Automated processes / industrial integration possible (PLC, network, USB) - Low-maintenance, air-cooled fiber lasers with long service life - Fully enclosed, safe industrial system (Laser Class 1) Features / Options: - Camera system LAS – Live Adjust System HD - Large Field Removal (LFR) – processing large fields without misalignment Bwodpfx Aoyi Twgofgeu - Industrial PC control with ACSYS Software Suite - Network / USB / PLC connectivity - Automatic door & safety monitoring - Lighting & signal beacon - Air-conditioned control cabinet - Fume extraction and filtration system for laser fumes - Extraction and filter unit (ULT LAS 1500) - Max. airflow: 3,240 m³/h - Nominal airflow: 1,200 m³/h - Max. negative pressure: 3,450 Pa - Power consumption: approx. 2.2 kW - Weight: approx. 300 kg Technical Data: Machine - Manufacturer: ACSYS Lasertechnik GmbH (Made in Germany) - Model: BARRACUDA® Custom Dual FL70S - Year of manufacture: 04/2020 - Laser: 2 × Fiber laser, 70 watts each (air-cooled) - Wavelength: 1055 – 1070 nm - Processing area: approx. 570 × 570 mm - Travel path: - X: approx. 875 mm - Y: approx. 600 mm - Z: approx. 190 mm Electrical Data: - Connection: 3AC / N / PE 400 V - Frequency: 50 Hz - Power consumption: approx. 5.5 kW Dimensions & Weight: - Cabin width: approx. 2050 mm - Cabin height: approx. 2300 mm (with signal beacon approx. 2600 mm) - Cabin depth: approx. 2850 mm - Total machine weight: approx. 3,800 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) We are happy to answer further questions by phone.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 0306, total width: 1,500 mm, total length: 5,800 mm, total height: 1,600 mm, type of input current: three-phase, BEMA S.r.l. 800 td Bwedszgb Akopfx Afgsu Well-maintained machine for producing freezer bags and ZIP bags. Please contact us for further information.

Condition: good (used), Direct from closed food factory - was used for frying Scotch Eggs. Dimensions to follow. Machine looks identical to Heat and Control HeatWave fryer so we think it was maybe manufactured under licence from Heat and Control. It can be supplied as a system comprising of a large double oil tank system for fresh and dirty oil and a Berief Drum Pre Filter. There is no top hold down belt on this machine. Bjdpfx Aezmy Aisfgjwu

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 3270590226, total length: 770 mm, total width: 970 mm, total height: 2,100 mm, warranty duration: 12 months, input voltage: 400 V, type of input current: three-phase, input current: 16 A, input frequency: 50 Hz, Vacuum filler REX RVF 327 – manufactured in Austria. Bodpjz D Uynsfx Afgjwu The machine can be used for portioning, dosing and twisting. Completely factory refurbished and renovated by MM SERVICE 1 year warranty with delivery and installation, included in the price.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, 1 x N&N Nadratowski / Orbmix twin-shaft mixer grinder with tote bin tipper/column loader. Supplied with various hole plates. Suitable for a variety of products including meat, poultry, fish, vegetables, petfood, sandwich fillings, etc. Manufacturer - N&N Nadratowski. Model - MG-450/160. Bwodpfewplc Aex Afgsu Date of manufacture - 2011. Mixing capacity - 450 litres (approx 350 litres of product). Output - up to 2,000 kg/h, depending on product. Electric supply - 400 V / 50 hz / 3 phase. Power - 24 kW. Weight - 1530 kg (mixer grinder) and 282 kg (column loader). Previous use - for mixing and grinding a poultry and vegetable mixed product.

Condition: refurbished (used), Year of construction: 2025, Equipment: documentation/manual, CMS NC SA32 TM R65 CNC machining center for woodworking and plastic machining. The machine was originally manufactured in the 1994 and underwent a complete control and drive retrofit in 2025. As part of the retrofit, the machine was equipped with: New OSAI OPENcontrol CNC system New servo drives and servo motors New control electronics and operator interface Modernized machine control architecture and programming environment This upgrade combines the reliability of a modern CNC system with the robust industrial construction of a heavy-duty CMS machining center. Technical Specifications X-axis travel: 3,250 mm Y-axis travel: 1,250 mm Z-axis travel: 250 mm Vacuum worktable size: 3,240 × 1,200 mm R65 revolver unit with 6-position rotating drum 25 high-speed electrospindles (18,000 rpm) and 5 electrospindles (9,000 rpm) Tool holders: ETS32 collets, MK2 Morse taper, hollow cutters Ø30 mm Feed speed up to 20,000 mm/min in X and Y axes Dual Becker VTLF250 vacuum pumps for workpiece clamping Machine weight: approx. 8,500 kg Equipment OSAI OPENcontrol CNC control system Vacuum workpiece clamping system Automatic centralized lubrication Hydraulic revolver positioning system Dust and chip extraction hood Complete technical documentation for both the machine and the new control system Condition The machine is fully operational and ready for production. The 2025 retrofit significantly improved reliability, serviceability, and future spare-parts availability while retaining the proven CMS mechanical structure. Inspection and testing under power are available by appointment. An additional identical CMS NC SA32 TM R65 machine is available and can be purchased separately either: Bwodpszv Si Tefx Afgju as a spare parts machine, or as a complete operational machine with the original control system and software.

Condition: ready for operation (used), functionality: fully functional, The TIPPER TIE Technopack KDC-SV Clipper is engineered to meet the most stringent requirements of the food processing industry. This semi-automatic machine ensures fast, reliable, and hygienic clipping of natural, artificial, or plastic casings. Its German precision technology makes it a highly valued piece of equipment in settings where every second and every gram matter. Featuring a full stainless steel frame, the KDC-SV offers optimal corrosion resistance, enabling thorough and frequent cleaning without compromising durability. Additionally, it is equipped with an easy casing diameter adjustment system, providing high flexibility for multi-format production lines. This makes it an ideal solution for demanding facilities processing a variety of products. The clipper also stands out for its ergonomic design: its foot pedal allows hands-free operation for smoother and safer product handling. Furthermore, the intuitive control panel allows for quick configuration, significantly reducing downtime. All these features contribute to consistent and controlled output, even during peak production periods. Investing in the TIPPER TIE KDC-SV means choosing a robust, reliable, and future-proof machine capable of supporting high throughput while ensuring impeccable closure quality. It represents a strategic choice for professionals aiming to boost productivity without compromising on safety or hygiene. Bwodpfjw I R H Nex Afgou Technical specifications Clipping speed: up to 50 cycles/minute. Compatible casing diameter: 25 to 100 mm. Compact dimensions: 1100 x 600 x 1450 mm. Power supply: 230 V single-phase—low consumption. Stainless steel construction—enables high-frequency, thorough cleaning.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, High speed Flow wrapping machine direct from closed Scotch Egg factory, commonly used for wrapping pies, Scotch Eggs and other bakery products. Rare to find a recent manufactured machine, this is the newest one we have seen. Bsdpfx Afozmy Avsgewu

Condition: used, Year of construction: 2019, We offer this used OMS Hennecke Ecomaster 2 (40/20) polyurethane processing machine, year of construction 2019. Bwodezpah Dspfx Afgou If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2022, Sanding machine Manufacturer: SCM Type: DMC System / E83 2000 Year of manufacture: 2022 Technical data Position 1 RC 250-2620 working unit for rollers with a diameter of 250 mm - RA-250 steel grooved roller - Time-controlled oscillating blower for cleaning the sanding belt - Motor with 22 kW - PR-E pressure unit with 2 rubber-coated rollers at the inlet of the unit Bsdpfx Afsz E Uxtsgewu Position 2 TIE-5000 working unit for internal, adjustable cross sliding shoe - PE 32T PWM3 electronic segmented shoe EPICS pitch 32 mm with PWM3 - Motorized rotary blower - Inverter-controlled motor, power up to 15 kW Position 3 SC-2620 working unit for superfinish sliding shoe - PE 32/C PWM3 electronic segmented shoe EPICS pitch 32 mm with PWM3 - Time-controlled oscillating blower for cleaning the sanding belt - Inverter-controlled motor, power up to 15 kW Position 4 BSH 250 working unit for textured roller with a diameter of 250 mm - STY 250 brush roller with a diameter of 250 mm with Tynex bristles with a diameter of 1.27 mm - Pneumatic on/off switching of the brush roller - Inverter-controlled motor with 11 kW At the outlet SP/U 200 working unit at the outlet for cleaning rollers, diameter 250 mm - SPC 200 brush roller with a diameter of 200 mm - Motor with 1.1 kW - Time-controlled rotary blower for workpiece cleaning at the outlet of the brush unit Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: refurbished (used), Maja ESM 435 – completely overhauled and immediately ready for use The machine has been completely overhauled by us. During this process, all bearings were replaced, electrical components were exchanged, and a new power supply line was installed. The Maja ESM 435 impresses with its compact design and simultaneously large working area. It delivers very good results in terms of scaling, is easy to operate, and runs extremely quietly. This machine is particularly interesting for direct marketers, agricultural businesses with their own slaughtering facilities, and smaller butcher shops. Why choose a used machine from Amfotech? Bjdpfsz Ah Sdsx Afgswu We are not a typical used machine dealer, but rather come from a technical service background. Therefore, each machine with us is: * disassembled and thoroughly inspected * technically completely reviewed * equipped with new wear parts * provided with new electrical components if necessary * delivered with a one-year warranty on used machines This way, you don't receive a machine that has simply been cleaned, but a technically overhauled machine that you can rely on in daily use. If you are interested or have any questions about the Maja ESM 435, please feel free to contact us directly.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, total length: 2,330 mm, total width: 1,230 mm, total height: 1,740 mm, power: 1.5 kW (2.04 HP), Professional industrial vacuum tumbler in very good condition, ideal for marinating and processing meat products. Robust and reliable construction, designed for uniform mixing and improved product quality. Supplied without a cooling system and ready for immediate use. Bwjdpsz Dac Usfx Afgju

Condition: used, Year of construction: 2005, - Automatic infeed table - KFA unit - Return system Used single-sided edge banding machine Manufacturer: IMA Type: Combima Systems / I/R751220/R3 1 single-sided combination machine for trimming, edge gluing and edge finishing of panel-shaped workpieces made of wood and/or wood-based materials. - Automatic infeed table - KFA unit - Return system Technical data "Workpiece": Workpiece length - min.: 238 mm - max.: 2350 mm Workpiece width - min.: 142 mm - max.: 800 mm Workpiece thickness: - min.: 8 - 40 mm Technical data "Strip" (only for longitudinal processing): Roll material: - Paper edge bands & plastic edge bands: 0.3 - 3.0 mm - Veneer edge bands: 0.5 - 3.0 mm Edge height: - min.: 14 mm - max.: 45 mm Technical data "Machine": Variable workpiece overhang from the chain conveyor (including edge with edge thickness 0.3-3 mm): - min.: 40 mm - max.: 80 mm - PC control ICOS open - Feed speed v=5-25 m/min, frequency-controlled drive - Inclined roller table as infeed section NC infeed system for front and carcass parts - for length and width-independent automatic workpiece feed in single-sided edge processing machines. Only for the production of strip material in the 2nd pass - An additional stop rail, adjustable via NC axis. Double milling unit 08.376: - Controllable - Motor 1 operating in the same direction and motor 2 operating in the opposite direction - Reserve space on the unit carrier for a double trimming unit with electrical pre-installation for 2 x 6.6 kW. - Heater 300 lg, 2x1.5 kW, for preheating the workpiece edge. - Gluing unit 04.1570 system for straight edges and adhesive application to the workpiece. The edge thickness depends on the magazine used and is max. 3 mm. - Adhesive application for workpiece thickness max. 50 mm - 2 pre-melting tanks for PU adhesive - 12-position edge magazine for roll material 0.3-3 mm thick. (8 slots up to 3 mm, 4 slots up to 1.3 mm) Vertical roll holder for 12 rolls: - max. roll diameter 850 mm - max. edge height 45 mm - Trimming unit 08.42, for 2 motors mounted on the upper pressure bar - Pre-milling and milling unit with height sensor - with 1 motor 1000 W Bwodpfxezuyple Afgju - Multi-profile / chamfer unit, with 2 motors 1000 W - Contour milling unit KFA 30 - Multi-profile drawing blade unit - Flat drawing blade 08.517 - Copy edging unit 08.604 - Edging unit 08.617-2 - Double milling stand 75.184, 1050 mm high, both stand sides can be used - Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 6000 rpm - Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 600 rpm - Motor spindle for the use of the Hydro-Format tool system - Return system, manufacturer Meinert Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.