Used Frimo Forming Press / Pressure Unit 2,500 Kn for sale (55,342)

Condition: used, Year of construction: 2013, operating hours: 73,000 h, functionality: fully functional, power: 7,130 kW (9,694.09 HP), output frequency: 50 Hz, nominal power: 7,130 kW (9,694.09 HP), continuous power: 7,130 kW (9,694.09 HP), rotational speed (max.): 1,500 rpm, motor manufacturer: M+M Turbinen-Technik, Evaporation pressure: 21 bar Steam pressure: 4.3 bar Temperature: Inlet 365 °C / Outlet 165 °C Generator: 8300 kWel Operating hours (annually): 8760 h/year Transformers included: Siemens Type 4GU6043-9HY Total operating hours: 73,000 h M+M turbines are typically custom-made industrial steam turbines used for combined heat and power (CHP) or for energy recovery from process steam. Due to the moderate inlet pressure and the relatively high outlet pressure, this is a back pressure steam turbine. It was designed for process steam systems to ensure efficient energy recovery and heat supply. The turbine was used in a paper mill to increase efficiency. With an output of 7.2 MW, this turbine is considered a medium-sized system in industrial applications. Thanks to the pressure ratios and the use of the turbine's exhaust steam, very little energy is lost. Pedpoz E Nh Nofx Af Segt The estimated steam flow rate is 30 to 40 t/h. This enabled the paper mill to achieve an efficiency of 60% to 75%. The efficiency in CHP operation was approximately 75% to 85%. The turbine was designed for operation for 8,760 hours (full load year) with a maximum steam flow rate of 114 t/h. The turbine-generator unit supplies the paper machine with electricity at the 6 kV level. The process steam required for production is provided in two pressure stages. As the steam flows through the turbine, the steam pressure is reduced from 20 bar to 4.2 bar. If the turbine needs to be shut down for any reason, the process steam supply is provided via four pressure reducing stations connected in parallel.

Condition: good (used), Make: Ursviken Type: VPF 1000/800-5,0 Control: Siemens Simatic panel Year: 1970 Hydraulic press for fabrication off large componts like dish heads tanks boiler shipyard and steelconstruction Renewed in 2015 with Siemens SIMATIC panel and E-Cabinet Rittal Build in height 2950 mm Maximum die height 1500 mm Movable Table & Piston in X-Ways Large package Die tooling radius 10/20/30/50/60/80/100 Pressing force 210 kg/cm2 Maximum stroke 800 mm Machine 2350 mm placed in ground Specifications Metric US Standard Capacity Kg 1000 Ton Distance between column 5010 mm Table Length 3000 mm Table Width 2000 mm Table Height 550 mm Ram stroke 1450 mm Approche speed Pgjdpfx Aokvmi Sof Sst 50 mm/min. Working speed 5 mm/min. Return speed 50 mm/min. Dimensions (Estimate) Length 0 mm Width 0 mm Height 0 mm Weight 0 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, machine/vehicle number: 15091, Buchdruck Nummerierwerke für Tiegel - Letter Press Numbering units for Tiegel - Cylinder Sünüm - Leibinger Numbering UnitsLetter Press Numbering units for Tiegel - Cylinder Div. Zubehör + Ersatzteile (Nummerierwerke OHT) Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Pgsdpfx Afsrffnme Sjt

Year of construction: 1993, condition: excellent (used), functionality: fully functional, For sale: original Amafilter B.V. stainless steel pressure leaf filter with approx. 5 m² filtration area. Complete automatic filtration unit with PLC control cabinet, pneumatic valves, sensors, piping, fittings and support frame/platform. Main data: - Manufacturer: Amafilter B.V., Alkmaar, Holland - Type: vertical pressure leaf filter - Filtration area: approx. 5 m² - Filter vessel: stainless steel - Vessel volume: approx. 450 L - Max. working pressure: 6 bar Pgodezfyafspfx Af Set - Max. working temperature: 150 °C - Year of filter vessel: 1993 - Automation: included - Control: PLC control cabinet - Valves: pneumatic valves - Includes sensors, piping, fittings, hoses and support frame/platform - Condition: used, fully functional according to seller information - Location: Serbia Suitable for filtration of vegetable oil, rapeseed oil, sunflower oil, soybean oil, technical oils, biodiesel and oleochemical applications. The filter can be used for crude oil clarification, post-degumming filtration, bleaching earth filtration and general liquid-solid separation in oil processing. The unit is sold as shown in the photos. Inspection possible. Loading possible. Zum Verkauf steht ein originaler Amafilter B.V. Edelstahl-Druckblattfilter mit ca. 5 m² Filterfläche. Komplette automatische Filteranlage mit PLC-Schaltschrank, pneumatischen Ventilen, Sensoren, Rohrleitungen, Armaturen und Tragrahmen/Plattform. Technische Daten: - Hersteller: Amafilter B.V., Alkmaar, Holland - Typ: vertikaler Druckblattfilter - Filterfläche: ca. 5 m² - Filterbehälter: Edelstahl - Behältervolumen: ca. 450 L - Max. Betriebsdruck: 6 bar - Max. Betriebstemperatur: 150 °C - Baujahr Filterbehälter: 1993 - Automatisierung: inklusive - Steuerung: PLC-Schaltschrank - Ventile: pneumatische Ventile - Sensoren, Rohrleitungen, Armaturen, Schläuche und Tragrahmen/Plattform inklusive - Zustand: gebraucht, laut Verkäuferangabe voll funktionsfähig - Standort: Serbia Geeignet für Pflanzenöl, Rapsöl, Sonnenblumenöl, Sojaöl, technische Öle, Biodiesel und oleochemische Anwendungen. Einsetzbar für Rohölklärung, Filtration nach Entschleimung, Bleicherdefiltration und allgemeine Fest-Flüssig-Trennung in der Ölverarbeitung. Verkauf wie auf den Fotos. Besichtigung möglich.

Condition: used, Buchformpresse / Book Forming Press Kolbus FE Pgsdezz A Rxspfx Af Sjt Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, functionality: fully functional, Year of construction: 2002, operating hours: 12,850 h, controller model: Siemens Sinumerik 840 D, laser power: 2,400 W, stroke rate (max.): 600 1/min, travel distance X-axis: 3,085 mm, travel distance Y-axis: 1,650 mm, TECHNICAL DETAILS Laser type: TLF 2400 turbo Laser power: 2,700 W Working area X-axis without repositioning: 3,085 mm Working area Y-axis max.: 1,650 mm Travel speed X-axis max.: 90 m/min Travel speed Y-axis max.: 60 m/min Simultaneous travel speed: 108 m/min Stroke frequency max.: 600 1/min Punching diameter max.: 76.2 mm Sheet thickness max.: 8 mm Punching force: 220 kN Workpiece weight max.: 230 kg Number of tools in the magazine: 18 pcs. MACHINE DETAILS Control system (software version): Siemens Sinumerik 840 D Pneumatic connection: 25 Nm³/h Electrical connection: 65 kVA Operating hours since power-on: 12,850 h (as of 07/01/2026) Dimensions & Weight Footprint (L × W × H): 7,900 × 8,700 × 2,400 mm Machine weight: 25,000 kg EQUIPMENT Capacitive distance control ContourLas Pgodpfxsz Duvve Af Sjt Compact dust extractor Slag detection 18 tool cassettes 18 die holders 3 clamping jaws Automatic tool changer with 18 stations Rotation of all tools NC-controlled digital, maintenance-free AC drives Automatic repositioning Rapid shutdown of the hydraulics Automatic shutdown Tool length compensation 2 small parts slides 500 × 500 mm with sensors Quality list Punch scrap extraction Forming capability Programmable punch lubrication Programmable clamping system Adaptive stroke length control Safety devices Remote diagnostics RJ45 network connection Detailed operating manual Extensive tool set including 18 setup cassettes Storage cabinet, green TRUMPF Quickset TRUMPF Easylod Table extensions (custom-built) for processing sheets up to 4 m in length Existing spare parts, uninspected and without storage Chip conveyor with container Air-cushioned installation Multitool Thread forming

Year of construction: 1993, condition: good (used), Offer 23100 Technical specifications: - Punching capacity, steel: 2 to 4 mm - Punching capacity, stainless steel: 2 to 3 mm - Horizontal reach: 30 mm - Vertical reach: 40 mm - Hydraulic unit, manufacturer NOLD, type No. 40.9-4, year of manufacture 1993 - Operating pressure: 250 bar Pgodpfxelnkrms Af Sst - Drive: 400 V / 4 kW - Space requirement: W 600 x H 800 x D 900 mm - Weight, approx.: 350 kg

Condition: used, Buchformpresse / Book Forming Press Kolbus FE Pjdstzc Iqopfx Af Segt Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Universal temperature control unit WEINREICH, Type WTD 4 Pjdpfxeg Rhx Us Af Sjgt Temperature control unit with electric heating and connections for external cooling Manufacturer's serial number: 11932217, Year of manufacture: 1993 Temperature: max. 140°C Operating overpressure: max. 6 bar Pump capacity: 30 l/min Tank volume: 4 liters Heating capacity: 4 kW Cooling capacity (heat exchanger): 15 kW Pump motor power: 0.37 kW Circulating water, supply + return: G 3/8" Cooling water, supply + return: G 3/8" Total power: 4.4 kW Mains connection: 380 volts, 50 Hz, CEE plug - Temperature control medium: water - Temperature control with actual and setpoint display: STÖRK-TRONIC, Type ST 96-35.02K - Water circulation pump: SPECK - An external cooling unit is required for cooling (the cooled water is fed to the temperature control unit) - Movable on 4 rollers Dimensions L x W x H: 620 x 260 x 670 mm Weight: 55 kg Good condition

Condition: used, machine/vehicle number: 231500079, -WT 108- Offered here is a table drilling machine and special drilling unit. Bench drill: Pgedpfx Ajlf Ezwsf Set - 5 speeds via pulley - throat / stroke: 10cm special drilling unit: - pneumatic clamping device - automatic feed

Condition: used, This listing is for 1 of 4 Parker SciLog SciPres Pressure Monitor. The unit is in full working condition and is ready for immediate release The Parker SciLog SciPres Pressure Monitor is a pre-calibrated, single-use pressure sensor specifically engineered for biopharmaceutical applications. It seamlessly integrates advanced pressure sensing with disposability, offering a hassle-free setup that enhances operational efficiency in critical environments. Key Features: - Pre-calibrated Sensors: Each sensor comes pre-calibrated for immediate use, simplifying setup and reducing error risks. - Unique ID for Traceability: Each unit is pre-programmed with a unique identification number, enabling thorough traceability and data documentation through the SciLog® SciDoc software. - Integrated Calibration Data: Calibration and identity information are stored on the sensor's chip for easy access and validation. - Simultaneous Inputs: The monitor can display inputs from up to three SciPres pressure sensors at once, providing comprehensive monitoring. - Pressure Calculations: It calculates and displays both trans-membrane pressure (TMP) and differential pressure (dP) for enhanced process visibility. - Stability: Gamma-stable, NaOH stable, and autoclave stable, ensuring compatibility with various sterilization processes and chemical environments. Applications: Pjdpfsxxycysx Af Sjgt - Filtration Processes: Ideal for monitoring pressure changes in filtration systems for efficient operation. - Chromatography: Supports precise pressure control, crucial for effective separation processes. - Reverse Osmosis: Ensures accurate pressure measurements for optimally functioning systems. - Fermentation: Monitors pressure conditions critical for bioprocessing and yield optimization. Additional Specifications: - Digital Display: Easy-to-read digital interface for real-time monitoring of pressure data. - Plug-and-Play Convenience: Designed for out-of-the-box use, allowing quick integration into existing systems without extensive setup.

Condition: good (used), TABLE PRESS WITH POWER UNIT Pgedpsk Adfnofx Af Set

Condition: good (used), Offer 23501 Gas transfer system with pressure reducer + separator Technical data approx: Pgsdpfx Aorf Uqzjf Set - Gas transfer system for nitrogen , argon , forming gas , hydrogen - from plasma cutting system + flame cutting system make ESAB - mounted on stainless steel plate as shown - div . pressure reducer + separator - Weight approx. 80 kg - Space requirement system approx. W 1.6 x H 1.5 x D 0.2 m

Condition: like new (used), Year of construction: 2016, functionality: fully functional, operating pressure: 180 bar, high-pressure hose length: 10,000 mm, input voltage: 400 V, overall weight: 230 kg, temperature: 140 °C, The MH-8P 180/2000 model is ideal for medium-sized and large industrial facilities where cleanliness is a top priority. The hot water cleaner is also successfully used in transportation companies, auto repair shops, and agriculture. It is also popular with private customers who value the highest cleaning quality. Hot water cleaners are particularly recommended for areas with grease or oil contamination. Water temperatures above 70°C enable dirt removal up to five times faster than cold water cleaners! Technical Specifications: Model: MH-8P 180/2000 Manufacturer: NILFISK Condition: Display Unit Year of Manufacture: 2016 Power Supply (~/V/Hz): 3 / 400 / 50 Pump Output (l/h): 2000 Operating Pressure (bar): 180 Maximum Pressure (bar): 250 Maximum Water Temperature (°C): 70–140 Connected Load (kW): 12 Power Cable (m): 5 Fuel Tank (l): 32 Chemical Tanks (l): 15+10 Weight (kg): 230 Dimensions (L x W x H) (mm): 1190 x 702 x 1020 Equipment: High-Pressure Gun: Nilfisk Ergo 3000 – 250 bar – 150 °C Pjdpfx Afjwqw Tps Ssgt High-pressure hose: Nilfisk Longlife DN10 – 500 bar – 155 °C Spray lance: Nilfisk Tornado 1120 mm – 300 bar with pressure regulation Nozzle: Flat jet power nozzle. Flat high-pressure jet with high surface coverage and good dirt-removing power. External control panel: Wired Schneider Electric remote control for controlling machine functions without having to go to the machine. Key features: The easily accessible water filter protects the pump from impurities in the water. Water softening system protects the heating coil from limescale deposits. Convenient handles on the housing + integrated nozzle storage Open oil system – no operating time limit Two integrated chemical tanks allow the cleaning fluid to be dosed directly via the machine. Easy-to-read and intuitive control panel The simple design and easy access to the individual components under the housing make the machine user-friendly and easy to maintain.

Condition: good (used), 1 used high-pressure machine vise Manufacturer: Allmatic Type: 160 Technical specifications: Jaw width: 160 mm Clamping range I: 0 mm – 152 mm Clamping range II: 147 mm – 302 mm Clamping force: 60 kN Weight: 60 kg Base body height: 137 mm Jaw height: 50 mm Pgodpfx Afow Sdxgj Sot Support height: −0.0585 mm L4: 613 mm – 915 mm 2 units available

Condition: good (used), Year of construction: 2008, pressing force: 300 t, control type: CNC control, actuation type: hydraulic, CNC crowning Hydraulic tool clamping EFL Easy Form laser measuring & correction system Pgjdpswrza Aofx Af Set Set tooling Laser guide protection Controlled axis Y1/Y2/X/R/V-Axis Max. bending length: 4000mm Distance between supports: 3150mm Max. pressing force: 320T Distance table mount: 570mm Max. stroke: 300mm Table width: 200mm Support throat: 400mm Descent speed: 120mm/min Working speed: 14mm/min Return speed: 130mm/min X-axis range: 1000mm Control: CADMAN Power: 42kW Length: 5800mm Width: 2300mm Height: 3800mm Weight: 23000kg

Condition: excellent (used), Throughfeed press 3000 mm 14 top cylinders Pgedpfxszx U Tys Af Sot 6 side cylinders Water heating with heating elements in the plate CE marking Year of manufacture: 1996

Year of construction: 2013, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 20910-01, Unused Hosokawa Bepex model BX 150 stainless steel (AISI 316) basket extruder for low pressure extrusion. Products with loose structure, large surface and good forming properties are produced with this machine. The product consists of a paste of low flow characteristics and low moisture content. The product to be processed is transported by the inlet into the machine. In the product area are two rotors which works in oposite directions to each other. - The upper 2-arm rotor with angle rotor and additional stirrers mixes and conveys the material down. Rotor is driven through gearbox by 0.55 kW, 60 Hz electrical motor, adjustable speed from approx. 14 - 139 rpm. - The lower 3-arms rotor is equipped with curved arms and rotor knives. Through the lower 3-arm rotor the product is compressed and forced through a cylindrical screen basket. The diameter of the granules results from the perforation diameter in the screen basket. Rotor is driven through gearbox by 3.0 kW, 60 Hz electrical motor, adjustable speed from approx. 15 - 144 rpm. Pgedpfot Tvx Tjx Af Sot Includes (2) extrusion screens 2 mm dia x 1.2 mm thick, switchboard with integrated control panel. Mounted on stainless steel frame with (4) wheels.

Condition: excellent (used), The devices shown in the pictures are robust, hand-operated lever presses from the ASTOR brand, model 52M. This type of press is used for riveting, crimping, attaching eyelets, snaps, and fasteners, as well as other assembly operations in leather goods, saddlery, footwear, and textile products. Description: Manufacturer: ASTOR Model: 52M Quantity: 2 units Hand-operated lever drive Heavy-duty cast iron construction Option to mount various working tools Stable base for screwing onto a table Simple and reliable design Ideal for saddlery, footwear, and upholstery workshops. Pgedpfx Aozgtz Sjf Set

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 68370, SMB Technik Multima 9R/9L/3K automatic beer bottling monobloc for rinsing, counter-pressure filling and crown capping of glass bottles. The machine was previously in operation at a Norwegian brewery. Following the sale and removal of the labelling machine, an electric motor is required to drive the bottling line. The electric motor is not included in the sale. The SMB rinsing, filling and capping monobloc was operational prior to this change and can be inspected at its current location in Norway. CONFIGURATION * 9-station bottle rinser * 9-head counter-pressure filler * 3-head crown capper * Automatic bottle transfer through rinsing, filling and capping sections * Conveyor sections * CO₂ counter-pressure / isobaric filling * Long-tube bottom-up filling * Separate bottle pressurising and return-gas system * Automatic filler bowl level and pressure control * High-pressure injection / jetter before capping * Electrically interlocked safety doors * Automatic bottle presence monitoring FILLING PROCESS The Multima is designed for bottling beer in glass bottles. Bottles are rinsed before being transferred to the filling section. Before filling, the bottles are pressurised, normally using CO₂. Beer is then filled from the bottom through long filling tubes. The system uses separate channels for bottle pressurising gas and return gas and is designed to minimise turbulence, foaming and oxygen uptake. After filling, the bottles pass a high-pressure injection device (jetter), which produces controlled foaming to help displace air from the bottle neck immediately before crown capping. TECHNICAL DATA Manufacturer: SMB Technik GmbH, Mannheim, Germany Model: Multima 9R/9L/3K Year: 2000 Serial number: 68370 Electrical supply: 400 V / 50 Hz Current: 12 A Container: Glass bottles Product: Beer Closure: Crown caps Filling principle: Counter-pressure / isobaric Rinser: 9 stations Filler: 9 filling valves Capper: 3 heads A 400 V to 230 V converter is included in the sale. DOCUMENTATION Extensive original SMB technical documentation is available, including operating instructions, setup and adjustment procedures, bottle changeover information, cleaning and sanitising procedures, maintenance and troubleshooting information, as well as filling-valve technical documentation. IMPORTANT The labelling machine has been sold separately and is NOT included. Pjdpfjz Dhrqsx Af Segt An electric motor is required to operate the bottling line and is NOT included. Tanks and other brewery equipment visible in the photographs are not included unless specifically agreed. The machine is located in Norway and can be inspected by appointment. Dismantling, loading and transport can be discussed separately.

Year of construction: 2022, condition: new, functionality: fully functional, machine/vehicle number: Q230213, For sale is an unused system for flameless explosion pressure relief, manufactured by REMBE. The device is in absolutely new condition, still packaged in its original wooden transport crate, and will be delivered including original documentation and accessories. Technical data (according to the nameplate): Manufacturer: REMBE GmbH Safety+Control Type: Q-Rohr-3-G-24 Nominal size: DN 600 / 24" Relief area: 2700 cm² Material: Stainless steel Seal: Graphite Podpfx Afozxgtfe Sogt Burst pressure (at 22 °C): nominal 0.700 bar g (min. 0.595 / max. 0.805) Certification: ATEX (IBExU 16 ATEX 2029 X) Signal unit: ROSE Systemtechnik (Type 15.061003, max. temperature 200 °C) Scope of delivery: 1x REMBE Q-Rohr-3-G-24 (in original wooden crate) 1x Original operating manual 1x PHOENIX CONTACT isolation amplifier (MACX MCR-EX-SL-2NAM-T-SP, original packaging) The system is ideal for industrial and process plants that require the highest ATEX safety standards. An on-site inspection is possible by arrangement.

Year of construction: 2021, condition: like new (used), functionality: fully functional, High pressure axial tube fan 1000mm 7.5 kW Nuaire SC1000LC4KGX-0JM6 several pieces for sale Air volume 32000m³/h at 420 Pa delivery head Pgjdpfx Aewr Ul Sef Sst Several pieces for sale, high pressure duct fans, excellent for various cooling and ventilation applications. manufacturer: NUAIRE Type: SC1000LC4KGX-0JM6 year of manufacture: 2021. completely NEW! several pcs Technical data: glass fiber reinforced polyamide blades Adjustable blade angle diameter Ø 1000 mm Anodized aluminum motor motor power 7.5 kW / 400/50Hz/ 1460 rpm, 17.76 amp -50/+60ºC (Stop/Start) minimum operating temperature in standard version Anchored housing Plastic blades Dimensions external size 1106 mm / depth 570 mm including motor weight: 136kg If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: good (used), Rebuilt by Doornbos 2020 with new Volvo engine, 750bar 80 liter/min, WOMA pump and Hammelmann ES2 control Podpfsvpl Hcsx Af Ssgt

Condition: used, Used agitated tank with insulation Previous application: Pharmaceuticals Item number: 10785 Volume: 300 liters Type: Standing on 4 castors Product-contact material: 1.4571 / AISI316 Design: with insulation Operating pressure (as per nameplate): +0.5 bar Max. operating temperature: +95°C Tank dimensions: Manway: 410 mm Internal diameter: 700 mm External diameter: 800 mm Foot height: 870 mm Total height: 1700 mm Pgodox Ewqdopfx Af Sot Total width: 870 mm Total length: 950 mm Cylindrical height: 650 mm Materials: Internal: 1.4571 / AISI316 External parts: 1.4301 / AISI304 Equipment: Nameplate: Yes Outlet diameter: DN25 Distance from outlet to floor: 365 mm Propeller agitator Empty weight: 184 kg

Condition: new, functionality: fully functional, mileage: 10 km, power: 375 kW (509.86 HP), fuel type: diesel, color: white, gearing type: automatic, Year of construction: 2026, operating hours: 10 h, New vehicle available from 15.10.2026 MTS Dino Vario 12 on Mercedes Benz Arocs 5 3751 B 13 Tridem Operating hours, fan: 10 hours Operating hours, compressor: 10 hours Standard equipment MTS suction unit MTS double fan MTS material separation system (patented) Automatic filter cleaning, compressed air compressor 4.5 m³/min, 8 bar 3 stabilization supports, PLC control with pre-installed remote diagnostics Radio remote control Storage option Documentation TÜV inspection Module options Stainless steel lining, complete Articulated arm MEGA ARM Rotary suction pipe system IKE/PERFOR Hydrostatic drive (suction + driving + steering) DESIGN full cladding High-pressure water system 30 l/min Stepless fan speed control Industrial equipment HBC radio control (2 x radio with cable function) + display Accessories - Module Storage box made of stainless steel Access ladder, engine compartment (2 x) Ladder under hose rack Double suction pipe basket Accessories - Lighting Light package I Light package II Light package III Light package V Light package VII Pgjdpfxoz E Nd De Af Sot Errors and prior sale excepted. The vehicle description serves only as preliminary information. We reserve the right to change prices, equipment and other details at any time. This information is not binding and does not create any contractual obligations.