Used Fintek Amh 2535 for sale (63)

Condition: excellent (used), Year of construction: 1998, total length: 7,150 mm, total width: 2,550 mm, total height: 2,670 mm, 1998 CPV 20FT swap body tank container 31,180L / 1 compartment bottom discharge UN PORTABLE, T11 AMKD steam heating inspection valid for 2.5 years/CSC until 08/2026 = Further information = General Information Year of manufacture: July 1998 Model year: 1998 Usable material: Chemicals Weights Empty weight: 4,100 kg Payload: 29,900 kg Gross weight: 34,000 kg Functionality Loading compartment volume: 26,000 l Podpsytpzvofx Amyjgp Superstructure brand: HOLVRIEKA 26,000L TC, 1 comp., L4BN, IMO-1, T11 Number of compartments: 1 Condition Technical condition: very good Visual condition: very good

Condition: used, machine/vehicle number: 697, mileage: 32,242 km, power: 132 kW (179.47 HP), first registration: 01/1995, fuel type: diesel, empty load weight: 9,500 kg, maximum load weight: 2,300 kg, overall weight: 11,800 kg, tire size: 9r22,5, axle configuration: 4x4, brakes: retarder, color: green, driver cabin: day cab, gearing type: mechanical, suspension: steel, operation weight: 18,200 kg, Equipment: ABS, all wheel drive, compressor, crane, differential lock, hydraulics, retarder, trailer coupling, TUV is made NEW truck registration , The Steyr in a dreamlike good condition directly from the authority (Swiss Army) Super maintained and checkbook maintained, see photo, the body is in a super good condition , The 12S18 is equipped with: All-wheel drive , differential lock rear , 2 seat patches front a 3. Load capacity at 3.6 meters = 2 tons and at 5.4 meters = 1.36 tons, - MKG crane type HLK 73a1, this also has a Rotzler cable winch, type HK 022 with 10 mm steel cable to lift or lower loads from or into the shaft at the crane tip, - The crane nozzles still have a manual extension so as not to hinder the off-road capability. - Tire size 9R22.5, transmission with 6 gears plus off-road reduction , has a speed limiter , empty weight 9500 kg , total weight is 11800 kg , cubic capacity 6592cm? , , 24Volt power supply , The Steyr not only has Tuv when handed over, but also drives reliably :-) - The Steyr is also ideal as a hobby vehicle but does not shy away from daily work. - All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Model, Mowag, DB, etc., and all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a call on 0049 (0)2248 Greetings, Philipp Pedpfoqx Sznex Amyogp

Condition: used, Year of construction: 2014, Suitable for the automatic machining of PCD-tipped milling cutters, shank tools, disc-shaped tools such as saws, milling cutters etc. using the wire-electro-erosion process. Accessories: Total enclosure Integrated loading system and tool magazine Automatic machining of up to 12 HSK 63 tools Program for erosion across the tool center at the cutting edge and for free erosion Hardware and software for DNC service Gripper fingers for workpiece automation SK40/HSK63-A,E/HSK63-B,F Adaptation to the A-axis on HSK63-A,E including 25 mm diameter test mandrel (HSK63 A,E system) Grinding mist extraction N 181 Cooling unit for dielectric fluid Automatic fire extinguishing system Measuring probes Machine lamp Automatic central lubrication Cutter outside diameter: Max. 250 mm Cutting length: Max. 260 mm Shank tool diameter: 10-250 mm Tool weight: Max. 20 kg traverse: X-axis 275 mm Y-axis travel: 300 mm Pgedpezguflefx Amyep W-axis travel: 200 mm Rotation range A-axis: 360 ° tool holder: ISO 50 E-axis swivel range: 120 ° Dimensions machine: W x D x H = 2535 x 2200 x 2280 mm Weight: about 4500 kg Connected load: 4.5 kW (400 V / 50Hz) colour: telegrey RAL 7045/7047

Condition: used, Dieses Gerät trägt Klebstoff auf der Rückseite eines zu beleimenden Materials auf This device will carry adhesive on the back of a material to be glued Pgjdpfx Amsyq S Iyjyop Anleimmaschine  / Gluing Machine Tränklein AM500 Zweiwalzen-Anleimmaschine  / Two-roller Gluing Machine  Serial-No. 2535 Arbeitsbreite / Working width 500mm Arbeitsgeschwindigkeit / Working speed 4 - 20 m/min für Kaltleim / for cold glue Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), mileage: 22,521 km, power: 70 kW (95.17 HP), fuel type: electric, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,200 mm, first registration: 12/2020, color: red, driver cabin: day cab, tire size: 245/55R17, number of seats: 6, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, cruise control, navigation system, parking heater, seat heater, traction control, = Additional options and accessories = - Bluetooth - Electric windows - Electric mirrors - None - LED lamp - Alloy wheels - Manual - Radio/cassette - Rear view camera - Lane keeping assist - Blind spot sensor = Notes = Configuration: 4x2, Unladen weight: 2535 kg, Gross vehicle weight: 3500 kg, Alloy wheels, Cruise control, Air conditioning, Number of airbags: 4, Auxiliary heater, Rear windshield wiper, Parking assistance: Front and rear, Electric windows, Electric mirrors, Radio/cassette, GPS navigation, Color: Red, Metallic, Rear view camera, Lighting type: LED lamp, Lane keeping assist, Air conditioning, Seat heating, Bluetooth, Blind spot sensor, Engine power: 70 kW (94 hp), Fuel: electric, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Body type: extended, Roof rack: None, Side doors: 2, Side windows: 4, Rear closure: Tail lift, Central locking, Seats: 6, Seat cover: Leather, Seat adjustment: Manual, 6-seater + whiteboard, Pano Navi L2 AVANTGARDE Night Distronic, 360 Camera, Navi Panodak, Empty, CarPlay/Android!, Spare wheel, Tire type: Summer tires = Additional information = General information Number of doors: 2 License plate: JPH-23-F Axle configuration Tire size: 245/55R17 Brakes: Disc brakes Suspension: Coil spring suspension Axle 1: Tire tread depth left: 5 mm; Tire tread depth right: 5 mm Axle 2: Tire tread depth left: 7 mm; Tire tread depth right: 6 mm Dimensions Dimensions (L x W x H): 525 x 190 x 195 cm Weights Unladen weight: 2,535 kg Payload: 965 kg GVW: 3,500 kg Interior Upholstery: Leather Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial information Psdsxryk Depfx Amyegp Leasing price: €544 per month (delivery van, 72 months); Please inquire for further information and conditions.

Condition: new, Year of construction: 2004, functionality: fully functional, Pressing force: 225 t Bending length: 3050 mm Distance between uprights: 2550 mm Control type: DNC 1200PS Eco/Col Ram stroke: 700 mm Throat depth: 405 mm Distance table/ram: min. 320 / max. 1020 mm Total power requirement: 29.5 kW Machine weight approx.: 15,500 kg Accessories/Equipment: Rear gauge Backgauge traverse adjustment: - X-axis gauging range (from bending line): 5–1000 mm - X-axis adjustment speed: max. 500 mm/sec Height adjustment: - R-axis adjustment range (from table surface): 85–235 mm - R-axis adjustment speed: max. 150 mm/sec Backgauge finger adjustment: - Z1-axis adjustment range (from left table front): 520–2365 mm - Z1-axis adjustment speed: max. 1000 mm/sec - Z2-axis adjustment range (from left table front): 690–2535 mm - Z2-axis adjustment speed: max. 1000 mm/sec - X1-axis adjustment range (from center line): ± 125 mm - X1-axis adjustment speed: max. 250 mm/sec Die shifting – adjustment via rear gauge (MVX): - Adjustment range: max. 100 mm - Adjustment speed as per X-axis: 500 mm/sec Pgjdpfxoxb Tfte Amyop Front support/press brake aides: - Swivel angle BV1/BV2-axis: 55° - Swivel speed BV1/BV2-axis: max. 45°/sec - Lifting force per swivel arm BV1/BV2-axis: max. 1,500 N

Condition: used, Year of construction: 2007, Suitable for the automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as Saws, milling cutters etc. using the wire-electro-erosion method. Accessories: Total enclosure, Cooling unit for dielectric, automatic fire extinguishing system, Mist extractor N181 Pgedewtmg Dopfx Amysp Probe, Machine lamp, automatic central lubrication, Workpiece carrier ISO50, Measuring mandrel, Cutter outside diameter: Max. 250 mm Cutting length: max. 260 mm Shank tool diameter: 10 - 250 mm Outside diameter disc-shaped tools: Max. 250 mm Tool weight max.: 20 kg X axis travel: 275 mm Y-axis travel: 300 mm W-axis travel: 200 mm A-axis mounting cone: ISWO 50 E-axis swivel range: 180 ° Required space for the machine: 2535 x 2200 x 2220 mm Weight approx.: 4500 kg Connected load: 4.5 kW (400 V / 50 Hz) colour: gray RAL 7045/7047

Condition: used, Year of construction: 2002, Suitable for the automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as Saws, milling cutters etc. using the wire-electro-erosion method. Accessories: Pgodpfx Ajylby Ijmyop Total enclosure, Cooling unit for dielectric, automatic fire extinguishing system, Mist extractor Probe, Machine lamp, automatic central lubrication, Workpiece carrier ISO50, Measuring mandrel, Tailstock. Cutter outside diameter: Max. 250 mm Cutting length: max. 260 mm Shank tool diameter: 10 - 250 mm Outside diameter disc-shaped tools: Max. 250 mm Tool weight max.: 20 kg X axis travel: 275 mm Y-axis travel: 300 mm W-axis travel: 200 mm A-axis mounting cone: ISWO 50 E-axis swivel range: 180 ° Required space for the machine: 2535 x 2200 x 2220 mm Weight approx.: 4500 kg Connected load: 4.5 kW (400 V / 50 Hz) colour: gray RAL 7045/7047

Condition: used, Year of construction: 2013, Suitable for the automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as saws, milling cutters etc. using the wire-electro-erosion process. Accessories: Total enclosure, Adaptation to A-axis on HSK63-A,E incl. test mandrel Ø 25 mm System HSK63 A,E Integrated loading system and workpiece magazine for automated processing of up to 12 workpieces. Probe, Automatic central lubrication, Coolant system for dielectric fluid, Automatic fire extinguishing system, Mist extractor, Machine lamp. Cutter outside diameter: Max. 320 mm Shank tool diameter: 10-320 mm Outside diameter disc-shaped tools: Max. 320 mm Pgedjylkvljpfx Amyep Cutting length: max. 480 mm Tool weight: max. 20 kg X axis travel: 500 mm Y-axis travel: 300 mm W-axis travel: 200 mm A-axis rotation range: 360 ° E-axis swivel range: 180 ° Required space for the machine: 2535 x 2200 x 2280 mm Weight approx.: 4800 kg Connected load: 5,4 kW colour: gray RAL 7035/7043

Condition: used, Year of construction: 2008, Suitable for the automated machining of PCD-tipped milling cutters, end-cutting tools, and disc-shaped tools such as saws, milling cutters, etc., using wire EDM. Accessories: Total enclosure External PC with contour management and Exprog software Cooling unit for dielectric fluid Automatic fire extinguishing system Automatic central lubrication Extraction system, Measuring probe Machine lamp Psdpsxy Rxhofx Amysgp Workpiece carrier SK 40 Measuring mandrel SK 40 cutter outer diameter: Max. 320 mm Shank tool diameter: 10-320 mm Outer diameter disc-shaped tools: Max. 320 mm Cutting length: max. 480 mm X-axis travel: 500 mm Tool weight: max. 20 kg Y axis travel: 300 mm Travel path W-axis: 200 mm Machine space requirements: 2535 x 2200 x 2280 mm A-axis rotation range: 360° E-axis swivel range: 180° Weight approx.: 4800 kg Connected load: 5,4 kW colour: grey RAL 7035/7043

Condition: good (used), Year of construction: 1981, sheet width - max. 2535 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded 20 Hub/min cutting angle 1.7 ° work height max. 900 mm total power requirement 8.5 kW weight of the machine ca. 3400 kg range L-W-H 2916 x 2250 x 1760 mm Machine from training workshop Good/well-maintained condition (!!) Features: - Robust electro-hydraulic guillotine shear “swing cut” - Electric motorized backgauge - Electric cutting length limiter - Electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment - from the front - Front support table incl. recessed handles Pgsdsxabvqepfx Amyop - 1x stable side stop, with scale and tilt cam - 3x stable front support arms - 1x freely movable foot switch - Front finger guard - EMERGENCY STOP button at the front - Operating instructions * Special accessories included: - Pneumatic sheet metal holding device for thin sheet metal cuts

Condition: like new (used), Year of construction: 2012, Bridgeport VMC 600 ECO Machining Center Bridgeport VMC 600 EC with Heidenhain ITNC 530 Control, Year of manufacture 2012, in excellent original condition. The machine comes from the training workshop of a renowned German engineering company. Tjbqsxqc Iceuwlfwjd CE compliant!! Technical Data: Year of manufacture: 2012 Condition: Good Control system: HEIDENHAIN ITNC 530 Travel in the X/Y/Z axes: 600/410/520 mm Rapid traverse in X/Y/Z axes: 40/40/20 m/min Table dimensions (L x W): 840 x 420 mm Maximum workpiece weight: 500 kg Maximum spindle speed: 8,000 rpm Minimum spindle speed: 40 rpm Spindle taper: BT 40 Spindle drive power: 8.5 kW Maximum tool length: 250 mm Maximum tool weight: 6 kg T-slot width: 18 mm T-slot spacing: 112 mm Positioning accuracy: ± 0.005 mm Repeat accuracy: ± 0.002 mm Power supply: 3x 400 V; 50 Hz Dimensions (L x W x H): 2000 x 2050 x 2535 mm About the machine: Pedpfx Amjxtxk Soyjgp Offered here is a Bridgeport VMC 600 EC machining center equipped with a Heidenhain ITNC 530 control system. This machining center is in excellent original condition. It comes from a facility where it was used sparingly for training purposes only. The control system is very user-friendly. The guides are lubricated regularly via the central lubrication system. The Bridgeport VMC 600 EC has been mechanically and electrically inspected by us. Take the opportunity to view and test the Bridgeport VMC 600 EC under power on site. You can find further milling machines from well-known manufacturers on our website.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 51 h, functionality: fully functional, machine/vehicle number: 641426, load capacity: 1,500 kg, We can offer you a KAUP pallet inverter, pallet turner Pgedpsykh Trefx Amyop Pallet Inverter: KAUP (made in Germany) Model: Inverter Type: 1.6T451W/0099 Machine number: 641426 Platform dimensions: 1470 x 1200 mm Maximum platform opening: 2275 mm Minimum platform opening: 280 mm Maximum stack weight: 1500 kg Motor power: 4 KW Connection: 380 volts Net weight: 2125 kg Year of manufacture: 04 / 2017 Machine dimensions (W x D x H): 3900 x 3950 x 3200 mm Transport dimensions (W x D x H): 3900 x 2300 x 2535 mm Price for the KAUP pallet inverter upon request via email This offer is valid while the machine is unsold Delivery conditions: Delivery time: from stock, subject to prior sale Delivery: ex works Baarle-Nassau Payment: prior to collection Prices: quoted net, excluding VAT Machinehandel De Leeuw BV is one of the few companies in Europe specializing in the trade and stock of predominantly used Kardex Remstar automated lift & carousel storage systems. We assemble and/or dismantle these systems safely using VCA-certified technicians, a service we have provided for over 33 years. Machinehandel De Leeuw BV Oordeelsestraat 7–B 5111 PA Baarle-Nassau The Netherlands