Used Face Plate 2013/2 for sale (83,082)

Condition: used, functionality: fully functional, machine/vehicle number: 2550X10.14MM, control type: manual, degree of automation: manual, actuation type: mechanical, number of rollers: 3, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller diameter: 400 mm, roller length: 2,550 mm, working width: 2,500 mm, working height: 800 mm, sheet thickness (max.): 14 mm, sheet thickness stainless steel (max.): 10 mm, input voltage: 380 V, input frequency: 50 Hz, Equipment: centralized greasing system, cone bending device, emergency stop, swiveling upper roller, 3 roll 2500x14 mm Plate bending machine Model OMCCA ITALY CAPACITY plate width 2500 mm plate thickness 14 mm pre-bending 10 mm --- Useful rollers width 2550 mm Top roll d 300 mm Side rollers D 280 mm hard surface of the 3 rolls centralized gear unit side rolls driven Opening front hydraulic drop-end to unload the closed shell. Extended shafts to take installation of add-on molds for section bending Variable speed rolling up to 5 mtr/min Nwodpfx Aoy Aubusg Ren power electric motor 20Hp on hydraulic unit console with electric push buttons commands. Dial gauge position rollers readout safety installations with emergency stop

Year of construction: 2013, condition: good (used), Computer monitor, screen, TFT industrial monitor, flat screen, industrial monitor touchscreen -Manufacturer: Pro-face, industrial monitor flat screen touchscreen -Type: FP3710-T42-U Njdpjuh H Efefx Ag Rewn -Article No.: PFXFP3710T2AU -Model: 3580406-01 -Dimensions: 475/120/390mm -Weight: 10.4 kg

Condition: used, Face plate, face plate chuck, four-jaw chuck Nsdpjb Hbyhofx Ag Rown -Chuck size: Ø 195 mm -with: T slot 10 mm -Thread intake pitch: 3 mm -Weight: 5.7 kg

Condition: good (used), Cast iron bed - Floor Plate Nwodpfxez I A Ubo Ag Rsn Useful surface (L x W x H): 3600 x 1200 x 300 mm 4 T-slots: width 44 x 26 mm Equipped with Levelling feet Weight: approx 3 T

Condition: excellent (used), Year of construction: 2021, overall weight: 8,000 kg, total height: 300 mm, total length: 6,000 mm, total width: 2,000 mm, Make: STOLLE Type: TDG 6/2 Year: 2021 Floorplate Length: 6000mm Floorplate Width: 2000mm Height: 300mm No. Of T-slots: 8 Distance from T to T-slot / Jump:250mm T -slot size: 28mm Weight a plate approx.: 6000kg Number of matching pieces: 1 Length: 6000mm Width: 2000mm Height: 300mm Nwsdpfx Agexf Exgj Ren Weight: 8000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1995, Technical details: sheet width: 3000 mm plate thickness: 12 mm distance between columns: 3500 mm control: Cybelec DNC 10 G back gauge: 1200 motorisch mm cutting angle: 1,2 - 2,73 ° cutting gap adjustment: ja mm cutting capacity : 66.000 daN daN Knife length: 3100 mm down holder: 17 Stück interface: RS232 Table dimensions: 3200 x 600 mm total connected load: 22 kW weight of the machine ca.: 11,0 + (1,0 to Anbauteile+Zubehör) t space requirements approx. LxWxH: ca. 4,5 x 2,6 x 2,1 m transport dimensions LxWxH: ca. 5,0 x 2,25 x 2,2 m The guillotine shear was put into operation for the first time in 1998. The DNC 10 G control unit was specially designed for guillotine shears. It has a numerical axis for controlling the backgauge and automatically calculates and regulates the cutting gap, the cutting angle and the cutting depth, taking into account the material to be cut. (Data from the manufacturer) Table with side stopL:930 x W:105 x H:42 mm 2 table extensions L:1600 x W:100 x 83 mm Njdovc Amtjpfx Ag Rown Angle fence (attached to table extension) Operation via control panel with swivel arm and foot control Equipment: Drain with rollers for clippings 2x protective grid *

Condition: used, Year of construction: 2013, overall weight: 300 kg, load capacity: 3 kg, terms of delivery: FCA Pegnitz Nwsdozi E Tlspfx Ag Rsn delivery time: on request terms of payment: 100% prior to delivery

Condition: good (used), Year of construction: 2006, total length: 4,000 mm, total width: 2,500 mm, plate height: 300 mm, Manufacturer: PAMA Type: Floorplates Year of manufacture: 2006 2 units available, matching cast iron floorplates/bedplates Integrated levelling chambers Can be used in combination with PAMA SPEEDRAM 1000, Machine 8643 Testing area Mounting area Nodpfowpvcyjx Ag Rewn Measuring area Calibration area Specifications Metric / US Standard Length 4000 mm Width 2500 mm Height 300 mm Number of T-slots 10 T-slot spacing 250 mm T-slot size 26 mm Weight per plate, approx. 7800 tons Number of matching pieces 2 Dimensions (estimated) Length 4000 mm Width 2500 mm Height 300 mm Weight 7800 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contractual condition. We recommend that you verify all important details.

Condition: excellent (used), Year of construction: 2005, overall weight: 6,000 kg, total height: 310 mm, total length: 3,985 mm, total width: 2,010 mm, Floorplate Length: 3985mm Floorplate Width: 2010mm Height: 310mm No. Of T-slots: 8 Distance from T to T-slot / Jump:250mm T -slot size: 28mm Weight a plate approx.: 6000kg Number of matching pieces: 2 Length: 3985mm Width: 2010mm Height: 310mm Weight: 6000kg Njdpfxjyg Hx Ej Ag Rewn Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Pallet feeder PF Touch screen Navigation with auto set plates rollers 4 plates 2 knives Side pocket Njdpfx Ajyx Nltsg Rown heidelberg presser stacker delivery

Condition: good (used), total length: 4,000 mm, total width: 2,000 mm, plate height: 295 mm, Manufacturer: STOLLE Type: DTS Year of manufacture: 1990 Specifications Metric US Standard Length 4000 mm Width 2000 mm Height 295 mm Number of T-slots 4 T-slot spacing / interval 400 mm T-slot size 42 mm Weight per plate approx. 6000 kg Dimensions (Estimated) Length 4000 mm Width 2000 mm Nwsdpfx Ajwp E Ncsg Rsn Height 295 mm Weight 6200 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, you will not represent or constitute contractual terms. We recommend you verify all important details.

Condition: good (used), total length: 4,700 mm, total width: 1,500 mm, plate height: 355 mm, Manufacturer: ASQUITH Nodpfxewp Erwj Ag Rown Type: SDT Year built: 1990 Specifications Metric US Standard Length: 4700 mm Width: 1500 mm Height: 355 mm Number of T-slots: 6 Distance T-slots / pitch: 250 mm T-slot size: 34 mm Number of matching pieces: 2 Dimensions (Estimated) Length: 4700 mm Width: 1500 mm Height: 355 mm Weight: 5400 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, you will not find any representation or contractual conditions. We recommend that you check all important details.

Condition: good (used), total length: 7,500 mm, total width: 2,400 mm, plate height: 300 mm, Manufacturer: ASQUITH Type: DT-75 Year of manufacture: 1990 Specifications Metric US Standard Length 7500 mm Width 2400 mm Height 300 mm Number of T-slots 8 T-slot spacing / Step 300 mm T-slot size 36 mm Number of matching pieces 2 Dimensions (Estimated) Length 7500 mm Width 2400 mm Height 300 mm Weight 15840 kg Nwodewp Ekyopfx Ag Rsn Please note: The information on this page has been provided by us to the best of our knowledge and belief, and where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend that you verify all important details.

Condition: excellent (used), Year of construction: 2020, KRAUSSMAFFEI KM 201-380 PX electric injection molding machine Year of manufacture: 2020 Operating hours: 21,849 h Clamping force: 2,000 kN (200 tons) Control system: MC6 Drive system: servo-electric with servo-hydraulic components Machine characteristics • Five-point, double toggle mechanism for the clamping unit, three-platen design. • Servo-electric drive for the clamping unit. • Servo-electric drive for injection and plasticizing. • Servo-hydraulic drive for the injection unit movement. Nwodpfx Agez Szncj Rsn • MC6 control system based on an industrial computer with real-time Ethernet communication. • Plasticizing unit for thermoplastics with a 40 mm diameter screw. Clamping unit Parameter Value Clamping force 2,000 kN (200 t) Mold opening force 300 kN Mounting plate dimensions (H × V) 870 × 820 mm Distance between columns (H × V) 635 × 585 mm Mold opening stroke 500 mm Minimum mold height 250 mm Maximum mold height 550 mm Maximum plate clearance 1,050 mm Ejector stroke 200 mm Ejector force forward / backward 39 / 19 kN Ejector speed 350 mm/s Injection unit Parameter Value Screw diameter 40 mm L/D ratio 20:1 Maximum injection pressure 1,860 bar Injection volume 201 cm³ Injection shot weight 183 g Injection speed 125 mm/s Injection rate 157 cm³/s Maximum screw speed 334 rpm Plasticizing rate 24.7 g/s Screw torque 337 Nm Nozzle clamping force 34 kN Nozzle radius 10 mm Nozzle orifice diameter 4 mm Electrical and hydraulic parameters Parameter Value Connected load 13.8 kW Electrical protection 63 A Installed heater power 11.5 kW Number of cylinder heating zones 5 Dry cycle time according to EUROMAP 6 2.0 s / 445 mm Oil tank capacity 200 l Weight and dimensions Parameter Value Net weight with control cabinet 14,300 kg Machine length 6,120 mm Machine width 2,170 mm Machine height 2,210 mm

Condition: used, Oscillating shear machine KÖLLSCHEN, type BSK 2000/2 Cutting length: 2000 mm Cutting thickness: 2 mm Stand overhang: 90 mm Working height: 920 mm Power supply: 380 volts, 50 Hz Nwjdpfx Ajifu Anog Ron Motor power: 4 kW - Drive via geared motor with brake and crankshaft - Mechanical sheet metal holder - Manual back gauge, 500 mm - Gauge adjustment via 2 handwheels, at the rear on the back gauge guide with a measuring scale - Front side gauge, left, 720 mm - Electric foot switch - Manual central lubrication - Control cabinet on the machine - Machine rests on 4 oscillating elements, approximately 100 mm in height Space requirement (L x W x H): 2800 x 1700 x 1450 mm Weight: 2300 kg Good condition

Condition: excellent (used), Year of construction: 2013, load capacity: 235 kg, arm reach: 2,550 mm, controller model: IRC5 M2004, The IRB 6640 serie is ABB Robotics latest generation of high payload, high performance industrial robots. The IRB 6640 is ideal for process applications, regardless of industry. Typical areas are for example Spot Welding, Material Handling and Machine Tending. Specifications Payload: 235 kg Arm Reach: 2550 mm Model Type: IRB6640 Controller: IRC5 Nsdpfxjwrayue Ag Rswn Model Year: 2013 Condition: Tested & Not Painted & Battery Changed Included: Manipulator + IRC5 Control Cabin + All Wire Sets + Teach Pendant We have a dedicated team handling these robots. If you share details about your project, we can recommend the most suitable robot for your needs and provide support throughout your project. We have big range of robots in stock, and if you are considering bulk purchases, we would be happy to offer a discount. The same model is available from the same or different production years, and bulk purchases can benefit from special pricing. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman.

Year of construction: 2023, condition: used, General information Year of manufacture: 2023 New: Yes Reference number: 2 Weights Empty weight: 930 kg Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Nsdpfx Ajq Ixtfog Rown Latest inspection: new Production country: KR Additional information Please contact Ö. Inalkac for more information AJCE ACP-20 Vibration Plate Compactor for excavators. ACP20 is 920kg and fits on 16-26ton excavator. We have also Compactors for 5, 10, 15, 20, 30 ton excavators. Contact us for details. Verdichter, Compacteur, Puristin, Kompaktor, compactador, Zagęszczarka, Þjöppur, Komprimator, Цомпацтор, Συμπιεστής, Compattatore

Condition: good (used), Year of construction: 2013, operating hours: 3,450 h, fuel type: diesel, Genie S-40 telescopic boom lift 4x4 DEUTZ DIESEL 14.2m working height, 2013. Nedpfxoz Hnx Ne Ag Rewn A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without warranties (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call beforehand, as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, This listing is for a Sakura Tissue-Tek Tec 5 CM E-2 Cold Plate Nodexzgzbjpfx Ag Rswn The Sakura Tissue-Tek TEC 5 CM E-2 Cold Plate is the cryogenic cooling component (cold plate) of the broader Sakura Tissue-Tek TEC 5 tissue embedding system — a key part of histology workflows in pathology and research labs. It’s designed to rapidly cool and solidify paraffin-embedded tissue blocks during processing Typical Use Case This cold plate is used by histology technicians and pathologists to cool paraffin blocks immediately after embedding so that they are firm and stable enough for trimming and sectioning on microtomes — a critical step toward producing high-quality histological slides for diagnosis or research.

Condition: used, Outer diameter: 500 mm Njdpob Nzi Djfx Ag Rown Bore: 95 mm Flange width: 103 mm Mounting, short taper: Size 6

Condition: good (used), cutting height (max.): 330 mm, cutting width (max.): 508 mm, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, - Capacity: cutting depth 508 mm / working height 330 mm - Suitable for steel, stainless steel, aluminium and plastics - Infinitely variable speed control - Table dimensions: 660 x 660 mm - Tilting table - Table load capacity: 225 kg - Saw band: 3912 mm - Emergency stop - Documentation - 400V Njdpfxoyzkrmo Ag Rswn

Condition: excellent (used), Year of construction: 2013, load capacity: 340 kg, arm reach: 2,800 mm, controller manufacturer: ABB, controller model: IRC5, IRB 7600 is ideal for heavy applications, regardless of industry. Typical uses include handling heavy fixtures and parts, turning car bodies, lifting engines, in foundries or forges, and loading and unloading machine cells. It can also be used to lift large, heavy pallet layers. Characteristics such as high available torque and inertia capability, rigid design, and powerful acceleration have earned this market leader its “Power Robot” title. Year: 2013 (bulk buying discounts available) Condition: Used Cabinet: IRC5 Included Teach Pendant: Included Signalling & Power Cables: Included Nsdpfx Aow Nanreg Rswn Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands.

Condition: used, axle configuration: 3 axles, color: other, Year of construction: 2013 Nwsdpotq T S Rsfx Ag Rjn Empty weight: 8.350 kg Axle 1: left 10 mm right 10 mm Axle 2: left 8 mm right 8 mm Axle 3: left 10 mm right 10 mm

Condition: excellent (used), overall weight: 14,000 kg, total height: 455 mm, total length: 5,500 mm, total width: 2,420 mm, T slotted bed plate STOLLE - DT-4/2 T slotted cast iron floorplate 4000 x 2420 x 455 mm Nwjdpfxezc Ibmo Ag Rsn Floorplate Length: 5500mm Floorplate Width: 2420mm Height: 455mm No. Of T-slots: 6 Distance from T to T-slot / Jump:400mm T -slot size: 42mm Weight a plate approx.: 14000kg Number of matching pieces: 2 Length: 5500mm Width: 2420mm Height: 455mm Weight: 14000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: refurbished (used), * Machine made in Germany, reelstands from Massenzana. • Single facer 2200mm, profile B, new Friese corrugating rolls. Njdpfxokyt Iie Ag Rswn • Brand new Friese steam heads (3pcs). • New condensate valves. • Bridge • Reelstands 2PC – Massenzana • Glue kitchen, 2 tanks 2+3T • Slitter- scorer, longitude • Rewinder, role former ejector • Robust cutter (crossway) • Steam generator Zafa, heating oil 8T tanks. • All unconditional bearings, belts etc. has been replaced (brand new). Urgently need to free up the space, best offer wins.