Used Eddy Current Separator Wps-1000 + Set for sale (27,638)

Condition: refurbished (used), functionality: fully functional, Year of construction: 2023, input voltage: 400 V, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, Manufacturer: Rausch (Haan/ Rhld) Model: RS 4/1000 Machine No.: 5027 Year of manufacture: 2001/2023 Weight: 580 kg Overhauled: 3/2023 by Wiemers AG General / Technical Data: Unused, overhauled mechanical vertical broaching machine Rausch RS 4, with current “CE” certification Pulling force: 40 kN (4,000 kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Fpedpfxsw H Dgne Ak Uel Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table dimensions / Working area: 540 x 340 mm / 450 x 250 mm Table opening: Ø 90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,350 mm x 900 mm x 1,000 mm (with splash-guard cabin) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Accessories / Special equipment: - Drive with 2 speeds - Safety door with interlock and chip chute - Chip chute with tool storage - Electric clamp jaw sensing (tool removal monitoring to prevent unintentional retraction of the drawbridge) - Integrated coolant system with solenoid valve (controlled via swing system) - Patented coolant/lubricant swiveling system - Externally adjustable tool length setting system (reproducible across multiple machines) - 4 central lubrication points for the trapezoidal spindle drive - Closed centering plate for profile tools with additional protection plate for flat broaching tools (keyway tools) - 3-sided enclosed splash guard cabin with tool storage (ideal for profile broaching) - External control panel (connected via Harting plug connector) Remarks: The machine has been completely overhauled, the machine body thoroughly reconditioned. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made from cast, wear-resistant bronze - All bearings and seals replaced The coolant system (pump, check valve, and drain valve) including coolant/lubricant swing system is new - Coolant supply is controlled via a solenoid valve, which can be switched over by the swing system - The drawbridge as well as the clamping jaws and rack segments are new - A deactivatable clamping jaw detection system has been installed (additional safety for operator & to prevent tool breakage) - A safety door with interlock, signal display, and door lock - The tool length adjustment system has been relocated outside the machine compartment - Additional end-position limit switches have been installed - Complete new electrical system (control cabinet) - No PLC installed, machine is electrically maintenance-friendly - New drive motor (SEW Germany) with brake - The machine has been freshly painted with 2-component structural paint General The dual spindle drive ensures smooth, centralized pulling force and consistent broaching speed (broaching speed selectable: 3 m/min or 6 m/min). By design, the machine is quick and simple to set up for broaching with flat broaching tools for keyway cutting. Thanks to the universally constructed design of the drawbridge and machine table, operation with both profile and flat broaching tools is possible without the need for additional drawheads.

Condition: excellent (used), ERICHSEN CORROCOMPACT 618-1000 Corrosion Testing System Manufacturer: ERICHSEN GmbH & Co. KG Type: CORROCOMPACT 618-1000 Year of Manufacture: 2017 Machine Type: Corrosion Testing System / Climate Change Testing System Test Chamber Volume: 1,000 liters For sale is a used ERICHSEN CORROCOMPACT 618-1000 corrosion testing system with a separate air conditioning unit and Siemens SIMATIC touch control. The system was developed for professional corrosion, climate change, salt spray, and condensation tests and is ideally suited for testing laboratories, the automotive industry, research institutions, and quality assurance. Technical Data: Model: 618-1000 Series: CORROCOMPACT 617 Serial Number: 16855/005 Test Chamber Volume: 1,000 liters Power Supply: 3+N+PE AC 400 V / 50 Hz Connected Load: 5 kVA + 9 kVA (air conditioning unit) Fuse Rating: 3 × 32 A Compressed Air Connection: 6–10 bar Deionized Water Connection: 3–6 bar Control: Siemens SIMATIC HMI Touch CPU Version: 2.2.3 HMI Version: 2.2.3 Air Conditioning Unit: Manufacturer: ERICHSEN Type: VS-Bo-1,1-40-L-S Year of Manufacture: 2014 Serial Number: 14-2430 Refrigerant: R507 Connected Load: 3.3 kW Max. Operating Current: 8.4 A Compressor Power: 1.3 kW Evaporator Fan: 0.18 kW Condenser Fan: 0.28 kW Steam Humidifier: 1.6 kW Heater: 5 × 0.2 kW Dimensions: External Dimensions (W × D × H): approx. 2,100 × 1,350 × 1,670 mm Height with Hood Open: approx. 2,500 mm Internal Dimensions (W × D × H): approx. 1,190 × 815 × 1,040 mm Equipment: Siemens SIMATIC Touch Panel Separate Air Conditioning Unit 1,000-Liter Test Chamber Climate Change Testing Salt Spray Testing Condensation Testing Automatic Test Programs Compressed Air Connection Deionized Water Connection Salt Solution Connection Exhaust Connection Floor Drain Supported Test Standards: DIN EN ISO 11997-1 DIN EN ISO 6270-2 AT ISO 11503 ASTM D2247 VDA 621-415 B P-VW 1210 DIN EN ISO 9227 NSS VDA 233-102 DIN EN ISO 6270-2 AHT DIN EN ISO 9227 AASS DIN EN ISO 9227 CASS ASTM B117 D171058 DIN EN ISO 6270-2 CH DIN 50958 ISO 9227 BS 3900 Part F2 Fpjdpszk A Ebefx Ak Uel DIN 55991 Transport Data: Test Chamber (W × D × H): approx. 2,100 × 1,350 × 1,670 mm Air Conditioning Unit (W × D × H): approx. 1,700 × 900 × 1,900 mm Weight of Test Chamber: approx. 600 kg Weight of Air Conditioning Unit: approx. 500 kg Total Weight: approx. 1,100 kg Condition: Used The system was last used in an industrial setting. Optical condition according to the pictures. Scope of Delivery: ERICHSEN CORROCOMPACT 618-1000 Air Conditioning Unit VS-Bo-1,1-40-L-S Siemens SIMATIC HMI Touch Accessories according to the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to change, errors and prior sale.

Condition: used, Year of construction: 1979, Press force: 1000 t Stroke: 350 mm Frame width: 3030 mm Side frame opening: 1450 x 1400 mm Shut height (stroke up): 1400 mm Fedpfx Aszyl Anjk Uepl Table area: 3000 x 2000 mm Table height above floor: 430 mm Ram area: 3000 x 2000 mm Downstroke speed: 300 mm/s Upstroke speed: 340 mm/s Note: The machine is partially disassembled and currently in storage.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: TZ-JRT-30B-2800, Automatic log-cutting machine for toilet paper and hand towel cutting Fully automatic operation with advanced PLC control, LCD touchscreen, and servo motor. The machine is designed to minimize manual intervention, reduce labour requirements, and improve operator safety. The main operating parameters are set directly via the touchscreen PLC. The machine can be integrated with a converting and rewinding line for more efficient production. Designed for long-term industrial operation. Major components are imported, with the remaining components sourced from quality Chinese manufacturers. Technical Specifications Cutting diameter: 130–250 mm, adjustable via PLC Cutting length:50–380 mm, adjustable via PLC Maximum log length: 2,750 mm, adjustable via PLC Log lengths: Adjustable via PLC Cutting speed: Manually adjusted according to log diameter, thickness and cutting length Maximum stable operation speed: Up to 20 cuts/min for logs below 210 mm diameter and cutting lengths of 50–220 mm For cutting lengths above 220 mm: Automatic speed adjustment to approximately 10 cuts/min Automatic blade sharpening Automatic log loading/pick-up table Log storage rack with automatic feeding Automatic waste/reject removal via mechanical pusher (if using the push hand) Electrical connection: 3 × 400 V, 40 A Compressed air: 0.6 MPa Machine dimensions: 3,500 × 2,500 × 2,000 mm Weight: Approximately 3,000 kg (2 parts, cutter and the mechanical pusher) Country of manufacture: China Machine Condition The machine has been in operation at the factory and has been running without any major issues. Installation year 2020, running conditions about 7hrs /one shift. The following maintenance/repairs have been carried out: * Upper drive bearings replaced (2025) * Lower drive bearings replaced (2026) * Drive belts replaced (2026) * Damaged motion-control wiring repaired/replaced (2026) * Every 3-month inspection * Every 6-month lubrication of moving parts The machine is currently dismantled and stored in a dry warehouse. It can be inspected in its dismantled condition. Spare Parts Included Band saw blades: 4,400 × 70 × 0.65 mm price €105/pc, 9 unused blades, 1 sharpened and ready-to-work condition blade, 1 sharpened and ready-to-work blade (width narrow, still can cut most of the articles) Diamond grinding wheels: €80/pc, 1 spare Fpedpfx Ajzxnmyek Uol New dust collector/vacuum system: €1,100 - purchased new but never installed (2-way suction and 1-way blown-in, with collection bin, direct attachment to the cutter) Other Information * Made in China - technical support within 24 hrs, spare parts in about 2 weeks. * Automatic operation * PLC + LCD touchscreen control (screen has original protection film still attached) * Servo-driven system * Suitable for toilet paper and hand towel logs * Suitable for integration into a converting/rewinding production line * Machine dismantled for storage Export outside the Baltic States Inspection possible by prior arrangement. Videos: youtu.be/8-xRCmvARYM youtube.com/shorts/vU4EunMEQt4 youtube.com/shorts/wwuV2Gp30AY youtube.com/shorts/WZjjokJjgZY

Condition: used, Year of construction: 2006, gebraucht 2006 5539 prompt, Zwischenverkauf v Taiwan 55100 € 1 49600 € 1000 mm 850 mm 1000 x 610 mm 1000 x 600 mm 1000 mm 5 - 25 m/min 1250 mm/min 3 - 32 (0,02) mm 690 mm max. 400 mm/min mm 400 mm/min Fodpfx Aezzrcdjk Ujpl 0.001 mm 1450 1/min 11 kW 3.7 kW 0.37 kW 20,6 kW 3700 mm 4000 mm 3250 mm 4800 x 2830 x 2800 mm 7400 kg 1500 kg 1120 kg 1500 kg 355 x 75 x 127 mm Servo drive for grinding wheel feed, hardened and grounded slide ways Grinding wheel spindle on 6 high precision angular contact bearings Electro-magnetic chuck Coolant equiptment with aut. paper filter and magnetic separator Over the wheel automatic dressing device (with automatic compensation) Grinding wheel withgrinding wheel flange machine lamp Machine and equipment according to the CE-regulations User manual in ENGLISH New grinding spindle, spindle bearings, grinding wheel andgrinding wheel flange Buying used machinery is a matter of trust - Our transparency promise We offer you maximum security and complete transparency. •HONEST INSIGHTS: Detailed photos and functional videos of the current condition •LIVE ON-SITE CHECK:Live testing is possible at our facility •DIGITAL DEMONSTRATION:Individual live demonstration via video call •RISK-FREE PURCHASE:14-day return policy Details:

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: AM970083, Industrial arc spraying system Praxair TAFA CoArc 9910 / 9935 / TCV-400 For sale: a used industrial arc spraying system, Praxair TAFA CoArc 9910 / 9935 / TCV-400. Praxair CoArc 9910: Fpedpfx Aez Aakrok Uel The central control console. It features a modern touch display, on which the operator can linearly set and monitor all parameters (voltage, current, wire feed speed, and atomizing air pressure). Praxair 9935: The associated arc spraying gun. It uses a pull principle (or push-pull in combination with the console) to feed the two metal wires precisely and smoothly into the arc. Maximum current capacity: 350 amps at 100% duty cycle. Wire diameter (standard): 1.6 mm (14 ga) or 2.0 mm (or 1/16 inch to 2.0 mm depending on the installed feed rollers and nozzle kits). Spraying rate (throughput): Up to 20 kg/h (e.g., with zinc or zinc-aluminum wires). Wire feed principle: Powerful air or electric motor directly in the gun (pull principle). TAFA TCV-400: The power supply (inverter) of the system. It is a robust, industrial rectifier (380V/400V connection) that provides constant voltage and the necessary energy to maintain the arc between the wires. The "400" indicates the maximum or rated capacity of the transformer, although the 9910 system is typically operated at up to 350 amps. NH14

Year of construction: 2018, condition: excellent (used), functionality: fully functional, machine/vehicle number: 125102018, Manufacturer: TMA Automation sp. z o.o., Year of production: 2018 SET DESCRIPTION For sale is a complete set of two cooperating Cartesian robots manufactured by the Polish company TMA Automation, designed for use with injection molding machines. The set consists of a MIDI LINE linear robot and a UNI LINE in-mold labeling (IML) module. The robots were used in a production facility and are in a condition confirmed by technical documentation. The sale includes complete documentation. TECHNICAL DATA MIDI LINE robot (serial number: 125102018) Dimensions (L x W x H) 2400 x 2060 x 1435 mm (variable height), Weight 600 kg, Payload 8 kg, Z-axis reach 2300 mm, Y-axis reach 1400 mm, X-axis reach 1400 mm, Supply voltage 400 V / 50 Hz, Power 4.5 kW, Operating air pressure 6.5 bar UNI LINE robot with IML module (serial number: 126102018) Dimensions (L x W x H) 2540 x 1000 (1370) x 2090 mm, Weight 550 kg, Payload 8 kg, Stacker reach 1100 mm, Supply voltage 400 V / 50 Hz, Power 1.5 kW, Operating air pressure 6.5 bar EQUIPMENT INCLUDED Fpodpfxozwdx Nj Ak Uol Touchscreen control panel with a safety STOP button (e-stop), control software with the following functions: automatic mode, manual mode, no-label mode, no-part removal mode, program archive, graph and alarm module; complete technical documentation, CE marking on both machines. TECHNICAL CONDITION Robots from 2018, operated in industrial conditions (plastics injection molding). Control panel active; at the time of the photographs, program PRG 2 was selected, operating speeds: manual 22%, automatic 17%. The photographs show a red robot stop signal (standby condition, not an emergency). Recommended before purchase: personal inspection and test run at the installation site. SALES CONDITIONS Sold only as a set. Self-collection only. Transportation is the buyer's responsibility.

Condition: excellent (used), Year of construction: 2014, operating hours: 7,998 h, machine/vehicle number: 43610191, sheet thickness aluminum (max.): 6 mm, We are offering an Amada EML 3610NT punch laser combination machine for sale. The offered machine is used and in a very good condition. Main features of the machine (overall): - Possibility of combining punching and laser burning - automatic pick-up of details (suction cups for 45kg, small amount of perforation recommended) and exchange of pallets during the operation of the machine - automatic sheet feeding maximum length 3050x1500 and collection of residues after cutting, possibility of sheet loading during machine operation - automatic bale delivery 1500x400mm (two conveyor belts for details) - turning station with 41 fixed and 4 rotating stations - 3 manually adjustable paws - cutting elements on length 3020x1500 - Laser cutting length 2000x1500 - max. sheet thickness 6mm (due to brush table) - thread function - pneumatic hold-down device Accessories for the machine: - Light barrier - Thread cutting set - Sensor for bale chute - System for chip extraction - Separate lubrication of punching and threading tools - Bending sensors for sheet metal - A conveyor belt that pulls out the punching waste Machine data as of 17.09.2024 - Time of the running machine: 7998 hours - Operating time: 2972 hours - Cutting time: 1196 hours Fpsdjum R T Sepfx Ak Usl - Working time of the resonator: 6154 hours AMADA EML3610NT - Max. Cutting force: 300 kN - Power (laser efficiency): 4kW (CO2) - Type: EML-NT - No. 43610191 - Model:EML3610NT - Year of manufacture: 2014 November - Total value of the connection to the network: 400V/68.3 kVA - Connected load: 85 kVA - Compressed air connection: 8 bar; 48 m3/h - Width of the guarded area: 30m (max) - Minimum safety distance: 1.36 m - Response time of the machine + total response time of the firewall: 320ms - Stop time: 300 ms - Machine braking distance: 180mm - Weight of the punching/laser machine: 24,000 kg PRIII (reception of finished parts) - Model: PR III 300 L 2P - No.: 2424 - Year of construction: 2013 - Connection to the network: 400/50V/Hz - Max. Power supply: 8.5 kW - Compressed air connection: 6 bar 1000 l/min. - Dimensions and weight of the elements to be collected: Workpiece thickness from 0.5 to 3mm Min.150x150mm max. 2500x1000mm with a weight of no more than 45kg - Machine weight (PRIII): 4600 kg ASIII MP (sheet feeder) - Model: ASIII MP 300 - No.: 2994 - Year of construction: 2015 - Connection to the network: 400/50V/Hz - Max. Power supply: 12kW - Compressed air connection: 6 bar 1000 l/min. - Size of sheets that can be stored: Max. 3000x1500mm Minimum steel thickness 1000x300mm from 0.5 to 8mm Weight of a single sheet no more than 300kg - Machine weight (PRIII): 12 000 kg The price is for the entire machine only. The price does not include Tools, dismantling, transportation and commissioning If you have any further questions, please do not hesitate to contact us. The machine is offered in different sources. If you are interested, please confirm availability.

Year of construction: 2011, operating hours: 20 h, condition: used, functionality: fully functional, machine/vehicle number: MY15339, Diesel generator set, consisting of an MTU diesel engine and a Marelli three-phase generator. Engine data: Manufacturer: MTU Friedrichshafen GmbH Model: 12V 2000 G65 Year of manufacture: 2011 Power output: 695 kW Speed: 1,500 rpm Design: 12-cylinder V-diesel engine Displacement: approx. 23.9 liters Fpodjzzxa Aepfx Ak Ujl Weight: 2,450 kg Generator data: Manufacturer: Marelli Motori Type: MJB 400 LB4 B34 Serial number: MY15339 Rated apparent power: 1,150 kVA Voltage: 525 V Rated current: 1,265 A Frequency: 50 Hz Power factor: cos φ 0.8 Operating mode: S1 – continuous operation Protection class: IP23 Insulation class: H Weight: 2,750 kg 40 ft hc container

Condition: good (used), Year of construction: 2006, total length: 6,000 mm, total width: 1,950 mm, total height: 3,850 mm, overall weight: 5,000 kg, For Sale: Make: Mecatherm Model: BLOC HPII Included: - Mecatherm pre-proofing cabinet / pre-proofer (without infeed conveyor!) - control panel - tray supply and discharge conveyor - 90-degree curved conveyor for trays - Mecatherm spreading unit - documentation Conveyor width: 700 mm Fpjdpszx Er Hjfx Ak Ujl Spreading conveyor width at the pre-proofing cabinet outlet: 1000 mm 8 rows stacked on top of each other. Price includes careful dismantling and loading into the truck / container. It is possible to view the machine on site. It is currently still set up. If you have any questions or comments, please feel free to call or email us.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 15 h, machine/vehicle number: 121282, BENDMAK PRO 120 – Hydraulic three-roll profile and tube bending machine | 2024 | only 15.5 hours of use We offer a nearly new hydraulic three-roll profile and tube bending machine, BENDMAK PRO 120, manufactured in 2024. The machine has been used only minimally. The control system currently shows only 15 hours and 27 minutes of machine operating time and 31 hours and 14 minutes of hydraulic operating time. Operating times can be verified directly on the machine's display – see photos. The machine is fully functional, in very good technical condition, and ready for immediate use. The sale includes an extensive set of interchangeable rolls/tools for bending various profiles and tubes, as shown in the photos. Technical data: Manufacturer: BENDMAK Model: PRO 120 Year of manufacture: 2024 Serial number: 121282 Machine operating hours: 15:27 h Hydraulic operating hours: 31:14 h Type: hydraulic three-roll profile bending machine Shaft diameter: 120 mm Working roll diameter: 390 mm Motor power: 11 kW Power supply: 400 V / 50 Hz Fjdpfozzkvpjx Ak Uopl Weight: 4,720 kg CE Equipment and accessories: hydraulically controlled lower rolls hydraulic side guide rolls drive for all three rolls separate mobile control panel touchscreen display multiple sets of interchangeable rolls/tools for various profiles and tubes accessories shown in the photos are included in the sale The machine can be inspected and demonstrated in operation on-site.

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, machine/vehicle number: 1670-736, type of input current: three-phase, power: 7.5 kW (10.20 HP), rotational speed (max.): 7,570 rpm, space requirement height: 1,600 mm, space requirement length: 1,200 mm, input voltage: 380 V, space requirement width: 800 mm, input frequency: 50 Hz, Equipment: documentation/manual, For sale: GEA / Westfalia Separator SA 14-47-076 professional centrifuge, built in 1980, serial number 1670-736. This machine was used in a craft brewery for beer clarification. Specifications: 15–45 hl/h • 7,570 rpm • hermetic version • self-cleaning / automatic sludge removal • flow meter • 7.5 kW motor • 380 V / 50 Hz • 32 A connection. History: The machine was completely overhauled in April 2014. It was acquired in 2018 from another brewery. Maintenance work was documented by GEA / Westfalia Separator Belgium in 2021 and 2023, including the replacement of seals, sleeves, oils, greases and other maintenance consumables. Condition: Complete machine, photographed in its current installation. On-site inspection is possible by appointment. Documentation and GEA invoices are available for serious buyers. Fpsdpfx Akeztma Us Ujl Asking price: €19,500 (excluding VAT). Transport, disassembly and loading to be agreed upon with the buyer.

Condition: good (used), UNHOLTZ-DICKIE / HS-Simulators Vibration Test System Manufacturer: UNHOLTZ-DICKIE Corporation / HS-Simulators Horstmann GmbH Type: TA117SA-560 + HS 520 K 60 V For sale is a complete electrodynamic vibration test system consisting of an UNHOLTZ-DICKIE shaker, model 560, a SALL50F power amplifier, a VWIN II control/regulation system, and an HS-Simulators climate test chamber, HS 520 K 60 V. Suitable for vibration and shock tests, as well as combined vibration, temperature, and environmental simulation tests. Technical Data Shaker: Fpjdey S S Eijpfx Ak Usl Model: 560 System: TA117SA-560 Design: Air-cooled electrodynamic shaker Sine force: 6000 lbf peak / 26.7 kN peak Random force: 5200 lbf RMS / 23.1 kN RMS Max. acceleration of free table: 100 g / 981 m/s² Shaker stroke: 1 inch / 25.4 mm Axial resonance frequency: approx. 2200 Hz / 2.2 kHz Armature effective weight: 45 lb / approx. 20.4 kg Driver coil: 200 A Sine / 140 A Random Cooling: Air Power Amplifier: Type: SALL50F Power Amplifier Power Module: PML-50-S Master Controller: MCLL50 Supply: 400 V / 3 phases / 50 Hz Amplifier / Field supply: 41 kVA / 60 A Shaker blower: 15 kVA / 22 A Total system: 56 kVA / 82 A Max. driver current: 440 A RMS OUT SINE 300 A RMS OUT RANDOM Control / Regulation: VWIN II DSP Vibration Control System Control Console: MA117SA-560 Charge Amplifier: Type 122P DSP-based real-time control 4 input channels, expandable to 8 or 16 2 output channels Interfaces: TCP/IP, RS232, USB, Ethernet, Digital I/O Test types according to documentation: Random Vibration, Sine Vibration, Resonance Dwell, Classical Shock Pulse, SRS Shock & Analysis, Sine-on-Random, Random-on-Random, Gunfire, Long Time History Control, Signal Analyzer / Transient Capture HS-Simulators Climate Test Chamber: Type: HS 520 K 60 V Year of construction: 1988 Temperature range: -60 °C to +180 °C Connection: 380 V / 17 A / 10 kW Refrigerant according to nameplate: R13 / R502 Dimensions: Power Amplifier: approx. 537 x 825 x 1000 mm (W x D x H) Climate test chamber: approx. 1200 x 1800 x 2000 mm (W x D x H) Estimated total weight of the system offered, excluding separate control cabinet: approx. 2,200 – 2,800 kg Shipping dimensions and actual shipping weight will be determined separately for the shipping inquiry. Equipment / Scope of delivery: UNHOLTZ-DICKIE shaker, model 560 SALL50F power amplifier VWIN II control/regulation system Control Console Charge Amplifier Shaker blower HS-Simulators climate test chamber HS 520 K 60 V Industrial PC / Monitor Original system documentation and accessories as described Condition: Used Industrial system from commercial use. Optical condition as shown in the pictures. Functionality not fully tested. Inspection is possible and desired after prior appointment. Transport only by a suitable freight forwarder. Loading and collection possible by arrangement. Subject to changes, errors and prior sale.

Year of construction: 1983, condition: excellent (used), machine/vehicle number: 20020233 UG 1 Brücke, DEMAG KBK crane canopy crane runway with dimensions approx. 29 x 6m (6m bridge - double girder crane) Payload / lifting capacity 1000 KG - 1to Technical data of the system: Crane runway made of Demag KBK2 rails with internal current routing System is supplied complete: KBK rails, rail joiners, trolleys, end plates, cable trailing, brackets/hangers etc. incl. Demag PK5 - 1000KG chain hoist - lifting height approx. 4m Crane is disassembled and immediately available Used condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with load capacity and dimensions without obligation. Fpsdpfxjty Tdbs Ak Usl

Condition: excellent (used), Year of construction: 2015, ENGEL DUO 7050/1000 + Viper 40 RC300 Year: 2015 TECHNICAL DATA: • Clamping force: 1,000 tons Tie bar spacing 1420 × 1170 mm • Injection unit: 7050 • Screw diameter: 105 mm • L/D ratio: 22 • Bimetallic barrel • Control: ENGEL CC300 • ENGEL ecodrive SHV2 servo hydraulics • Power supply: 3×400V + N + PE / 50Hz OPTIONS: • 2× hydraulic core pulls on fixed platen • 4× hydraulic core pulls on moving platen • Total: 6× hydraulic core pulls • Core pulls with locking valves & pressure relief • Euromap 13 Fedpfx Ajzxy Szjk Uepl • 24-zone hot runner control • Max. hot runner heating capacity: 50 kW • Euromap 14 • 6× hydraulic valve gate control • Centering diameter: 250 mm • Through-hole in moving platen: 250 mm • Hydraulic shut-off nozzle • Electric screw drive • Ceramic barrel heaters • Barrel insulation • Interface for dosing/coloring unit • Separate cooling water connection for machine & mold • 20× flow regulators, 0–30 l/min • Mold temperature control circuits up to 95°C / 6 bar • PD-Graphic process monitoring • Ecograph energy consumption monitoring • Ethernet + USB • Process data logging ROBOT: ENGEL Viper 40 RC300 • Max. handling weight: 21 kg • X stroke: 1,200 mm • Y stroke: 1,900 mm • Z stroke: 4,280 mm • A/B/C servo axes, 70 Nm • Automatic central lubrication • Additional vacuum & compressed-air circuits • C70 handheld controller with 7” touchscreen CONVEYOR: ENGEL FB100 • 3,000 × 1,100 mm • Belt speed: 6 m/min • Adjustable height: 1,000–1,200 mm • Safety tunnel • Photoelectric sensor Including safety fencing and integrated robot interface.

Condition: used, Year of construction: 2023, Milk E-Heating System PHE Electric Heated water Vat with connected Plate heat exchanger to Heat up products such as milk, juice and similar products. This can be used for various applications were the product needs to be pre heated ie. Separation, Homogeniser, Cheese process, Heating Vat, etc. This comes with a fully modernised control panel and frequency inverter for the product pump. Make: DMUK Capacity: 1000-1000 L/h Temperatures: Regulated by the controls Circulation Pump: Included Control Panel: Included VDF: Included Condition: Excellent Fpodpfxsy E H Eqe Ak Uel

Condition: used, Year of construction: 2001, functionality: fully functional, Groninger Filling and Capping Line – Type DFK 6001 & KVK 206 Manufacturer: Groninger GmbH, Crailsheim Models: DFK 6001 (volumetric dosing filler) & KVK 206 (dropper inserter/capper) Year of manufacture: 2001 Machine No.: DFK 5265 / KVK 5266 Electrical connection: 220/380 V, 3 phase, 50 Hz Fpedpfsw Sd Nrox Ak Usl Documentation: Machine and operating manual (German) available Line output: According to manufacturer: up to 9,000 units/hour Actual recent operation: approx. 8,000 units/hour Output infinitely variable Technical Data – Filler (DFK 6001): 6-head volumetric dosing filler for free-flowing liquids Currently equipped with stainless steel pumps (dosing range 10–133 ml) General dosing range: 0.15–266 ml Bottles up to Ø 100 mm, max. height 320 mm Subsurface filling possible (also for foaming products) Pumps can be quickly removed for cleaning and sterilization Filling needles are adjustable in height and laterally Operation via control panel (on right) and dial scale handwheel (at rear) Working area protected by folding glass doors Manual feed via rotary table Ø 1000 mm, onward transport via plastic slat-chain conveyor Technical Data – Capper (KVK 206): Dropper inserter & capping machine Performance range: Object Ø: 20–100 mm Object height: 30–250 mm Cap Ø: 10–60 mm Cap height: 10–60 mm Capacity: max. 9,000 units/hour Closures separated in sorting bowls, fed and placed automatically Press-fit stations and capping heads synchronized Torque clutch adjustable for defined closure force Finished, closed bottles ejected on the right Processed formats: 4 bottle formats: 40 / 50 / 80 / 125 ml Same droppers and screw caps for all formats Dimensions (approx.): Line: 700 × 270 × 225 cm Control cabinet: 180 × 60 × 220 cm Application areas: Pharmaceutical industry Cosmetics industry Chemical industry Special features: Compact, GMP-compliant stainless steel line Flexible dosing ranges, also suitable for foaming liquids Ready for immediate use Condition: Well-maintained used condition Available immediately from Çorlu, Turkey Price: On request

Condition: ready for operation (used), Working width: 1000 mm Combination unit with pneumatic shoe Shoe set automatically Pneumatic belt tensioning Pneumatic oscillation Pneumatically activated shoe (lub: Shoe activated by air blast – w zależności od kontekstu) Electric table adjustment Two feed speeds Thickness gauge Fpsdpfxozxzhws Ak Usl Abrasive paper: 1030x2100 mm

Year of construction: 2018, condition: excellent (used), Weiss Technik SaltEvent SC/UKWT 1000 Salt Spray Testing Chamber Manufacturer: Weiss Umwelttechnik GmbH Type: SaltEvent SC/UKWT 1000, with annular spray air Machine Type: Salt Spray Testing Chamber / Climate Change Testing System Test Chamber Volume: 1,028 liters For sale is a used Weiss Technik SaltEvent SC/UKWT 1000 salt spray testing chamber with integrated climate change technology, touchscreen control, and annular spray air system. The system was developed for professional corrosion, salt spray, condensation water, temperature, and climate change testing. It is ideal for testing laboratories, the automotive industry, materials testing, research, and quality assurance. Technical Data: Manufacturer: Weiss Umwelttechnik GmbH Type: SaltEvent SC/UKWT 1000 Year of Manufacture: 2018 Test Chamber Volume: 1,028 liters Internal Dimensions (W × D × H): 1,560 × 645 × 720 mm External Dimensions (W × D × H): 2,925 × 980 × 1,370 mm Transport Dimensions (W × D × H): 2,925 × 1,880 × 1,370 mm Weight: 650 kg Mains Connection: 3/N/PE AC 400 V (-10 % / +10 %) 50 Hz Electrical Connection: 3P+N+PE 400 Vac 32 A Rated Power: 9.4 kW Rated Current: 19 A Refrigerant: R134a Refrigerant Quantity: 1.30 kg GWP: 1,430 CO₂ Equivalent: 1.86 t Max. Low Pressure: 17 bar(g) Max. High Pressure: 25 bar(g) Air-cooled version Ethernet interface Testing Ranges: Salt Spray Testing: Ambient temperature +5 °C to +50 °C Condensation Water Testing: Ambient temperature +5 °C to +42 °C Climate Testing: +23 °C to +70 °C Drying / Ventilation: Ambient temperature +5 °C to +70 °C Fpjdpfjzzli Rjx Ak Ujl Humidity Range Climate Testing: 20 to 98 % RH Humidity Range Drying / Ventilation: < 30 % RH Dew Point Range: +12 °C to +69 °C Consumption Data: Water Consumption Salt Spray Testing: approx. 0.4 l/h Water Consumption Condensation Water Testing: approx. 34 l Consumption of Spray Solution: approx. 0.9 l/h Compressed Air Consumption Salt Spray Testing: approx. 1.4 m³/h Compressed Air Consumption Ventilation: approx. 7.0 m³/h Temperature Stability: ±1.0 K Equipment: Touchscreen Control Annular Spray Air System Climate Change Testing Function according to VDA 621-415 Salt Spray Testing Condensation Water Testing Temperature Testing Climate Testing Drying and Ventilation Function Air-cooled Cooling System Ethernet Interface Automatic Testing Programs Transport Data: Dimensions (W × D × H): approx. 2,925 × 980 × 1,370 mm Transport Dimensions (W × D × H): approx. 2,925 × 1,880 × 1,370 mm Weight: approx. 650 kg Condition: Used Optical condition according to pictures. Scope of Delivery: Weiss Technik SaltEvent SC/UKWT 1000 Integrated Touchscreen Control Accessories as shown in the pictures Availability: by arrangement. Scope of delivery as pictured. Subject to changes, errors and prior sale.

Condition: excellent (used), Year of construction: 2014, The set on offer is a TREIF TWISTER AT Cube Cutter combined with a STORM engineering loading lift (Hebe- und Kippvorrichtung), forming a complete, automated dicing station. The set additionally includes knife blocks of 6, 8, and 30 mm, allowing different grades of the finished product to be produced without needing to purchase extra tooling. How does the TREIF TWISTER AT with the STORM lift work? Raw material is placed in a transport container, which is raised and tilted by the STORM lift, emptying its contents directly into the loading chamber of the TWISTER AT cutter. Inside the machine, raw material passes through the cutting assembly, where interchangeable knives (a quick tool-change system requiring no additional instruments) cut it into cubes, strips, or slices, depending on the tooling used and the selected cutting program. Control is handled via a touchscreen panel with stored cutting programs, allowing quick switching between settings when changing products or knife spacing. Key advantages of the TREIF TWISTER AT with STORM set The STORM loading lift eliminates manual lifting and emptying of raw material containers, reducing operator physical strain and speeding up the feeding of successive batches into the cutter. Its IP65 protection rating allows the lift to operate under conditions of frequent station washdown. The included set of additional knife blocks (6, 8, and 30 mm) extends the machine’s capabilities to further cube sizes without needing to purchase separate tooling, which matters for plants with frequently changing product ranges. The solid construction of the TWISTER AT cutter, weighing 950 kg, and its power supply suited to a wide voltage range (380–480 V) ensure stable operation across different electrical installations. Technical specifications of the TREIF TWISTER AT with STORM set TREIF TWISTER AT Cube Cutter Manufacturer: TREIF Model: TWISTER AT Description: Cube cutter Year of manufacture: 2014 Capacity: up to 3,5t/h Chamber: 120 x 120 x 550 mm Fsdpfjzzp S Nsx Ak Ujpl Current type: 3-PE, 50/60 Hz Operating voltage: 380–480 V Control voltage: 24 V Rated current: 15–12 A Supply line fuse: 25 A Rated power: 7 kW / 9.52 hp Weight: 950 kg Included additional knives: 6 mm, 8 mm, 30 mm STORM loading lift (Hebe- und Kippvorrichtung) Manufacturer: STORM engineering Year of manufacture: 2020 Power: 0.8 kW Power supply: 400 V, 50 Hz Protection rating: IP65 Weight: 410 kg Compliance: CE, ISO 9001-2015, Made in EU Application of the TREIF TWISTER AT with STORM set The set is used in meat processing plants, vegetable product manufacturers, and cheese processing facilities, wherever precise cube cutting of raw material is required alongside improved logistics for feeding raw material into the machine. The ability to quickly change knife spacing makes the set well suited to plants with a varied range of products.

Condition: ready for operation (used), Year of construction: 1967, functionality: fully functional, machine/vehicle number: 1597, type of input current: three-phase, input voltage: 380 V, heating capacity: 25.5 kW (34.67 HP), ILLIG UA 150 E Thermoforming Machine + US 100 – Complete Package Description Fjdpfx Akezx Erge Ujpl Complete ILLIG thermoforming and processing package consisting of two industrial machines, both manufactured in 1967. The package consists of an ADOLF ILLIG UA 150 E vacuum thermoforming machine together with an ADOLF ILLIG US 100 auxiliary processing machine. Both machines originate from the same production period and were used as part of a thermoforming production setup. 1. ADOLF ILLIG UA 150 E – Vacuum Thermoforming Machine Manufacturer: ADOLF ILLIG Maschinenbau, Heilbronn, Germany Model: UA 150 E Machine No.: 1597 Year of manufacture: 1967 Working / forming area: 1,500 × 1,000 mm Supply voltage: 220 / 380 V Frequency: 50 Hz Motor power: approx. 2.2 kW Heating power: approx. 25.5 kW Industrial vacuum thermoforming machine designed for forming thermoplastic sheet material. The machine is equipped with: Large 1,500 × 1,000 mm forming area Heating system Vacuum system / vacuum pump Adjustable forming controls Pressure and vacuum gauges Separate electrical control equipment Manual operating controls Integrated working/forming table 2. ADOLF ILLIG US 100 – Auxiliary Processing Machine Manufacturer: ADOLF ILLIG Maschinenbau, Heilbronn, Germany Model: US 100 Machine No.: 536 Year of manufacture: 1967 Supply voltage: 220 / 380 V Frequency: 50 Hz Motor power: approx. 1.1 kW Band length: approx. 3,570–3,670 mm The US 100 is an auxiliary processing machine intended for secondary processing of formed components. It is equipped with a large movable working table, electrical drive, adjustable working elements, and separate electrical controls. Complete package Both machines are offered together as one complete package. The sale includes: ILLIG UA 150 E thermoforming machine ILLIG US 100 auxiliary processing machine Associated electrical/control equipment shown in the photos A quantity of unused old-stock plastic thermoforming sheet rolls is also available and can be supplied separately or included by agreement. The machines are currently installed/stored in Greece and are available for inspection by appointment. EXW Greece. Dismantling, loading, and transport are at the buyer's cost and responsibility.

Condition: good (used), Year of construction: 2014, functionality: fully functional, volume flow: 1,000 m³/h, total width: 1,020 mm, total length: 1,680 mm, total height: 2,460 mm, overall weight: 1,540 kg, operating pressure: 10 bar, input voltage: 400 V, power: 14.2 kW (19.31 HP), 1 heat-regenerating compressed air adsorption dryer. The dryer was in use from 2014 to 2017. The system has been out of operation since 2017. The compressed air came from an oil-free Atlas Copco ZR3 compressor with 132 kW. Manufacturer: Donaldson Filtration Deutschland GmbH Type: HRS 1000 Year of construction: 2014 Volume flow at 7 bar: 1000 m³/h (16.66 m³/min) Connection: DN 80 Installed power: 14.2 kW Dimensions length / width / height: 1680mm / 1020mm / 2460mm Weight: 1540 kg Desiccant bottom (20 cm): 3 mm activated aluminum oxide Desiccant middle (40 cm): 2 mm activated aluminum oxide Top desiccant (rest up to the top) silica gel as a ball. Fpjdor A El Espfx Ak Uol The desiccant is already disassembled and immediately available. The desiccant was sucked out of the container with a vacuum cleaner and packed separately in airtight bags. The desiccant is still in a usable condition. It is not oily or soiled. There is the possibility of external re-drying. The TÜV has inspected the inside of the containers and an expert opinion is currently being prepared. "Loose adhesion on the lower part of the dished end" (pictures to follow)

Condition: used, Plasma impulse gas metal arc welding machine, pulse machine EWM Type Tetrix 400 Plasma / Tetrix 400 DC-P Robot Plasma welding and soldering machine Art. No.: Serial No.: Year of manufacture 2003 Output: 400 amps = 40% duty cycle 360 amps = 60% duty cycle 300 amps = 100% duty cycle Setting range: stepless Open-circuit voltage: approx. 26 volts Mains connection: 400 volts, 50 Hz, 32 amps plug - Digital display for current - Digital display for voltage, job, and program - Various welding programs can be selected - Pulse mode - Separate 4-roller wire feeder EWM, Type DV cold wire hand with connecting hose package approx. 5 meters - Approx. 4 meter hose package - External EWM water cooling, Type Cool 71 U41 DKF - External high-voltage unit - Welding machine equipped with 1 mm welding wire Space required L x W x H: 1300 x 640 x 1830 mm Weight: 245 kg Fpedpozwb R Nofx Ak Uel Very good condition

Condition: ready for operation (used), Year of construction: 2001, For sale is a complete set of equipment from two specialized production lines dating back to 2001 (machine park liquidation), designed for the production and final processing of electric motor stators. The machines are from reputable Italian manufacturers. The set includes two dedicated lines: 1. Line 63 (for stators with an outer diameter of ⌀90 mm / inner diameter of ⌀50 and ⌀47 mm): * Hydraulic press for the pre-forming of stator cores. * Core winding machine (stator core tying machine). * Final hydraulic press for forming the cores to their final dimensions (PiErre Galaxy A-100 with an Onda Impianti power unit). 2. Line 71 (for stators with an outer diameter of ⌀110 mm / inner diameter of ⌀55 mm): Fpsdpfx Akjzuuime Uel * Press for pre-forming. * Core winding machine (Mussino L.D.A.). * Final hydraulic press (PiErre Galaxy A-100). * Machine for joining the winding lead with the connection lead (Inarca Splice-Mat 1000). The lines also include: * Main machine, DMG MECCANICA s.r.l., model IM3E (year of manufacture 2005). * Set of winding wire unwinding and feeding units, Min Jen Precision Machinery, model MPI-0850FD, complete with additional tensioning equipment and plates. The machines have complete safety guards, and the hydraulic power supply is provided by high-performance Oleodinamica power units from Onda Impianti. It is possible to adapt the tooling to other types of motors. The equipment is ready for loading. Please contact us.

Year of construction: 2013, operating hours: 25,254 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: S40302, TOMRA AUTOSORT 4 optical sorting system equipped with VIS/NIR technology for the automatic separation of materials based on polymer and/or color. • Working width: 2,000 mm • Hour counter: 25,254 hours • Condition: operational until December 2025 • Current status: disassembled and available for inspection Fjdpfx Akszbtvtj Ujpl The hour counter indicates 25,254 hours, although a significant portion of these corresponds to periods in standby mode, meaning the actual operating hours of the scanner are lower. Suitable for sorting plastics and other materials using VIS/NIR identification, enabling separation by polymer type and by color.