Used Dreher Coiler for sale (235)

Condition: used, DECOILER DIMECO WIDTH: 1350mm COIL WEIGHT: 12t WITH INVERTER HYDRAULIC OPEN / CLOSE Njdpfx Aeytqxpjmyewi

Year of construction: 2021, condition: used, DECOILER MAX COIL WEIGHT 1000kgr MAX COIL WIDTH 400mm MIN INNER COIL DIAMETER 370mm MAX OUTER COIL DIAMETER 550mm Nwsdpegf Aaqofx Amyji POWER 1,1kw LIKE NEW UNUSED 4 PIECES IN STOCK

Condition: refurbished (used), Year of construction: 2026, overall weight: 13,000 kg, Completely overhauled pre-shredder VZ 110. - Engine 110 kW - Screen D 40 mm - Fully refurbished with new rotor shaft, cutter bars, sprockets with triplex chain. - Gearbox inspected and newly fitted with bearings - Clutch inspected and newly fitted with bearings - Engine inspected and newly fitted with bearings - Machine repaint: old paint removed, primed, and new finish applied Repair of your defective machine or new fabrication possible Nsdpjyk Ea Asfx Amyowi

Condition: used, Uncoiler S256 3Tn, made by KENT Nodpeyma A Dofx Amyswi Coil weight : 3 Tn Coil width : 250 mm Thickness : 0.8 - 3.2 mm SCOPE OF SUPPLY - 3Tn Single expandable uncoiler - Strip retainer - Control panel Coil weight: 3 Tn Coil width: 250 mm Thickness: 0.8 - 3.2 mm

Condition: used, OTO MILLS Double decoiler with bottom/top hold-down roll Model AD508SD Scope of supply includes: - Double hydraulic expansible mandrel - Hydraulic Mandrel rotation - Hydraulic Uncoiler rotation/lock Nsdjymadzepfx Amyswi - Hydraulic Uncoiler traverse for alignment - Brake pneumatically-operated disc OTO Mills Mandrel: Double hydraulic expansible mandrel Mandrel rotation: Hydraulic Uncoiler rotation/lock: Hydraulic Uncoiler traverse for alignment: Hydraulic Brake pneumatically-operated disc: OTO Mills

Condition: new, Year of construction: 2025, curl forming machine 2,05m New! Direct from the manufacturer! Width: 2050 mm Max. Sheet thickness: 0.65 mm for Rm 400 MPa Shaft diameter: 16 mm Pipe diameter 31.8 / 3.6 Weight: 15 kg We are looking forward to your contact! Nsdpfocg Tn Nox Amyjwi

Condition: good (used), Maximum inner roll diameter: 1300 mm Nwjdpfx Aoik E R Ujmyoi Minimum inner mandrel diameter: 700 mm Maximum roll width: 700 mm

Condition: good (used), Load capacity: 200 kg Material width: 300 mm Coil inner diameter: 240-580 mm Nodpfx Aeh Rfhhomyjwi Coil outer diameter: 1200 mm

Condition: new, Year of construction: 2026, neu 2026 070236 September 2026, Zwischenv Türkei 6900 € 133.17 € 500 kg 1200 mm 400 mm 550 mm 300 mm 80 mm 1450 mm 1200 mm 1640 mm 260 kg motorized drive mechanical adjustable coil mandrel with 4 jaws Nwodowirmuopfx Amysi speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control PNEUMATIC PRESSURE ARM ALTERNATIVES (prices on request): Version without pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2001, laoding capacity: max. 200 Kg. coil outside diameter: max. 1.000 kg. coil innert diameter: 210 - 500 mm strip metal width: max. 200 mm speed: 23 U/min. Nsdpfx Ajzlrvfemyewi

Condition: used, functionality: fully functional, coil weight: 3,000 kg, mandrel diameter: 508 mm, mandrel length: 620 mm, turntable diameter: 1,400 mm, Load capacity: 2 x 3000 kg Distance from floor to center of mandrel: 950 mm Outer diameter of stop: 1400 mm Mandrel length: 620 mm Mandrel nominal diameter: 508 mm Coil guide rings: on both sides Braking: pneumatic, brake disc/caliper Unwinding drive: electric, geared motor Mandrel expansion: threaded spindle with socket wrench Locking of rotary bearing: foot pedal with electrical documentation Operated flawlessly in production up to the point of dismantling at the customer's plant. We can support you with the following during integration: Nedpfxjy Smcio Amyewi Planning Mechanical overhaul Control system construction Painting Safety concept CE documentation

Condition: used, functionality: fully functional, coil weight: 2,000 kg, mandrel diameter: 508 mm, mandrel length: 420 mm, turntable diameter: 1,350 mm, Load capacity: 2 x 2000 kg Nsdpfx Ajy Sl Rxsmyjwi Distance from floor to center of mandrel: 950 mm Outer diameter of stop: 1350 mm Mandrel length: 420 mm Mandrel nominal diameter: 508 mm Coil guide rings: on both sides Braking system: pneumatic, brake disc/caliper Unwinding drive: electric, geared motor Mandrel expansion: threaded spindle with Allen key Locking of rotary bearing: foot pedal with electrical documentation Operated flawlessly in production at the customer's facility until decommissioning. We can support you with the following during integration: Planning Mechanical overhaul Control system construction Painting Safety concept CE documentation

Condition: used, functionality: fully functional, actuation type: manual, mandrel diameter: 508 mm, mandrel length: 400 mm, turntable diameter: 1,800 mm, Floor to mandrel center: 1000 mm Outer diameter stop: 1800 mm Mandrel length: 400 mm Nwsdpjy Smkaofx Amyoi Mandrel nominal diameter: 508 mm Coil limiting rings: on both sides Braking: pneumatic, brake disc/caliper Mandrel expansion: threaded spindle with socket wrench Mandrel drive: electric, geared motor The machine was in perfect working order in production at the customer's site until it was dismantled. We can assist you with integration, including: Planning Mechanical overhaul Control system engineering Painting Safety concept CE documentation

Condition: used, functionality: fully functional, degree of automation: manual, actuation type: manual, coil weight: 500 kg, mandrel diameter: 508 mm, mandrel length: 300 mm, turntable diameter: 1,200 mm, Load capacity: 2x 500 kg Floor to spindle center: 850 mm Outer stop diameter: 1200 mm Spindle length: 300 mm Spindle expansion range: 300-610 mm Coil limit rings: on both sides Braking: handwheel, band brake Spindle expansion: via handwheel, bevel gear set Rotary bearing lock: foot pedal Was operating flawlessly in customer production until disassembly. We can support you with integration through: Njdpfx Amey Slu Dsyswi - Planning - Mechanical refurbishment - Control system construction - Painting - Safety concepts - CE documentation

Condition: used, functionality: fully functional, actuation type: manual, coil weight: 500 kg, coil width: 320 mm, mandrel diameter: 508 mm, turntable diameter: 1,300 mm, Load capacity: 2x 500 kg Floor to spindle center: 1080 mm Outer diameter of stop: 1300 mm Maximum strip width: 320 mm Nominal spindle diameter: 508 mm Coil limiting rings: on both sides Braking: handwheel, band brake Spindle expansion: threaded spindle with socket wrench Locking of the turntable bearing: foot pedal Nedpsy Slrcsfx Amyewi Operated flawlessly in production until disassembly at the customer's facility. We can assist you with integration through: Planning Mechanical overhaul Control system engineering Painting Safety concept CE documentation

Condition: used, functionality: fully functional, Year of construction: 2002, coil weight: 1,500 kg, coil width: 425 mm, mandrel diameter: 508 mm, turntable diameter: 1,500 mm, Load capacity: 2x 1500 kg Floor to center of mandrel: 1090 mm Outer diameter of stop: 1500 mm Mandrel length: 425 mm Mandrel nominal diameter: 508 mm Coil limiting rings: both sides Braking: pneumatic, brake disc/caliper Mandrel expansion: threaded spindle with socket wrench Locking of rotary bearing: foot pedal Operated flawlessly in customer’s production until dismantling. Control system not included. We can support you with integration through: Planning Mechanical overhauling Control system assembly Painting Safety concept CE documentation Nwedpfx Aey Slp Usmyoi

Condition: excellent (used), functionality: fully functional, Year of construction: 1988, loading capacity: max. 3.000 Kg. table diameter: 1.600 mm Nwsdpfx Ajtzwxwemyei strip metal width: max. 150 mm

Condition: new, In addition to standing a PDF document, see the description of positions - Prices on request! RUCHSER standard offer with layout for a wooden window production with being milled Glass bar and screwed corner joints. Daily capacity approximately 15 Window Manufacturing consisting of: Item 1.0 - Item 107 850 000 RU-PWD-H1600/130/4 profile carriage double-sided Length 1600 mm, width 850 mm, height 2140 mm for horizontal position round and transport of Profile sections. 12 support arms each column welded to the column, 2 adjustable center column, clear spacing of the support arms 130 mm, Depth of the support arms on each side 400 mm, Support arms covered with felt, with 4 plastic swivel castors, diameter 150 mm, of which 2 with stop means. Item 2.0 - Item 0150001 RU-M rotation - tilting table manually tiltable bearing surface 1300 x 1400 mm, with 4 plug extension 1000 mm long, including tool tray without weatherboard- ausspaarung. Item 2.1 - Item 5009-1 2 trays with 2 drawers (for RU-4, RU-2/4) Item 2.2 - Item 5062-1 Extract left and right 500 mm and up to 7000 mm folded down with one support leg Item 2.2 - Item 5012-1 Hinged extension tubes Length 700 mm (max. 3 pairs) Item 2.4 - Item 6125-2 Corner mounting fixture AoE attacks rectangular pneumatic lowered with clamping unit for 2 profiles mounted on RU-M Item 2.5 - Item 2069-1 tilting instead of manually, pneumatically operated Item 3.0 - Article 10.782 million RU-EW-2S two-sided vehicles in stock Storage capacity max. 36 piece sash L - shaped screw, length 1200 mm, Depth 800 mm, height 2200 mm, edition of Holme felted, 4 swivel castors, 2 with brakes Item 4.0 - Item 6600000 RU-KWI-1000 Commission cart unladen be nested, Length 1120 mm, width 1100 mm, working width 850 mm, height 1900 mm, Nwsdpfxeytx Urs Amyoi Plant height 1500 mm, bearing capacity 750 kg mobile on 4 plastic castors, Diameter 150 mm, 2 with Stop device, 2 drawers on the left and right each 350 mm in length, max. 1800 mm and Height max. 2100 mm Item 5.0 - Item 740-300 RU-DH-F2 double reel cart for 2 rolls to roll size 620 x 350 mm (without coil) to roll size 800 x 350 mm (with coil) with 4 swivel castors, 2 with stop device Item 5.0a alternative to Item 5.0 - Item 744-200 RU-DH-F4, double coiler car for 4 wheels to roll size 620 x 350 mm (without coil) to roll size 800 x 350 mm (with coil) with 4 swivel castors, 2 with stop device Item 6.0 - Article 7.36 million RU-BW-1200-fog Cart with 16 divisions, length 1200 mm, Width 700 mm, height 1100 mm, with 2 shelves, mobile on 4 Plastic castors with a Diameter of 125 mm, 2 with stopper Item 7.0 - Article 10.0092 million RU-FMOG / K wing mounting rotary tilting table * for wings with attached bar and milled glass Bolt on corner joint. Rotary-tilting table with pneumatic tilting device and 6 piece sliding vacuum suction cups. Adjustment range in width from 4...

Year of construction: 1969, condition: ready for operation (used), A complete 8-stage transfer press line with a Weingarten double-column transfer press is available. 1) Mechanical double-column transfer press Weingarten S.3100.08.70.1, year of manufacture: 1969, tool stations: 9, forming stages: 8, total press force: 3100t, press force blanking slide/drawing slide: 300t/2800t, strokes: 28/min, blanking slide stroke: 200mm, drawing slide stroke: 500mm, max. drawing depth: 120mm, drawing slide ejector stroke: 100mm, blank holder stroke: 50mm, drawing cushion force: 25t, transfer pitch: 700mm, max. blank dimensions X/Y: 450mm/450mm, max. blank diameter: 540mm, table dimensions X/Y: 1200mm/5600mm, main motor power: 300kW, machine dimensions X/Y/Z: approx. 10500mm/7500mm/9700mm, weight (according to documentation): approx. 524t, stroke counter reading (September 2024): approx. 25 million. 2) Blanking and cutting press Georg Maschinentechnik PKD 630, year of manufacture: 2004, max. press force: 6300kN, slide stroke: 240mm, strokes: 40/min, max. slide adjustment: 100mm, max. shut height: 525mm, table dimensions X/Y: 1200mm/1500mm, slide dimensions X/Y: 1050mm/1100mm, main motor power: 110kW, weight: approx. 110t. 3) Decoiler Roland Dreher 2398 G-SP, year of manufacture: 2004, max. load capacity: 25500kg, max. strip width: 1050mm, coil inner diameter range: 475mm-615mm, max. coil outer diameter: 2000mm. 4) Straightening feeder Roland Dreher 1689 G-SP, year of manufacture: 2004, strip width range: 100mm-1050mm, max. strip thickness: 12.4mm, max. strip cross-section: 6000mm², straightening rolls: 6, straightening roll diameter: 100mm, infeed and outfeed rolls: 4, diameter: 140mm, max. feed speed: 50m/min, feed accuracy: 0.1mm, transverse travel: +/-400mm. 5) Transfer feeder Roland Dreher 700/160/50, year of manufacture: 1994, feed length: 700mm, closing stroke: 160mm, lifting stroke range: 0mm-50mm, max. rail spacing: 1190mm, strokes: 24/min. 6) Central component oiling and processing system Leblein, control system: Siemens S7-300. 7) Line control system and electrical cabinet Siemens S7-317 with two decentralized Siemens ET200M units, modernization year: 2011. Including additional peripheral equipment such as feeding, marking, hydraulics, conveying, etc. Documentation available. An on-site inspection is possible. Nedpfozl U H Tex Amyjwi

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: CNC control, degree of automation: automatic, actuation type: electric, For sale: lightly used sheet metal rewinding machine SVM-100, designed for automatic rewinding of sheet metal from large coil rolls into smaller rolls of 25m2 (1250*20,000 mm). The machine was manufactured in 2024, has been used very little, is in excellent technical and visual condition, and is fully ready for operation. It is an excellent solution for companies that produce roofing materials or other sheet metal products supplied in rolls. The machine automatically: - Unwinds the sheet metal from the coil up to 1 ton. If you want to rewind from 2-5 ton coils, an automatic unwinding unit is required to feed the sheet metal. - Winds the sheet metal into a roll. - Cuts the sheet to a specified length. - Allows the roll to be wrapped with stretch film. - Applies protective film to the surface of the sheet metal. The machine is connected – it can be inspected and tested. Technical specifications: Manufacturer: Foldsolutions / UAB Pakservisas Model: SVM-100 Year of manufacture: 2024 Made in: Lithuania Operating parameters: Sheet metal width: 1230–1260 mm Sheet metal thickness: 0.4–0.6 mm Maximum roll length: 20 m Roll diameter: approx. 300 mm Equipment: Nwjdpfxozibwgj Amyei Automatic sheet metal winding Sheet metal cutting to a specified length Automatic roll packing process with stretch film Option to use protective film on the sheet metal Integrated length measuring encoder Touchscreen control panel Manual and automatic operating modes Pneumatic cutting system Adjustable operating speeds Length calibration function for precise production Emergency stop system Technical data: Electrical power: 400 V / 50 Hz / 3 phases Power: 2.6 kW Required compressed air pressure: 0.65 MPa Air consumption: 0.3 m³/min Dimensions (L × W × H): 2555 × 1730 × 1800 mm Weight: approx. 600 kg Application: Ideally suited for roofing materials, facade, sheet metal products, sheet metal processing companies, and other manufacturers who require fast, accurate, and safe preparation of sheet metal rolls for transport or storage. If you have any further questions, we will be happy to answer them.

Condition: new, sheet thickness: 45upper roll diameter: 460prebending: 35sheet length: 2600Bottom Roll Diameter: 420Side Roll: 360messurements (LxWxH): 5770 x 2300 x 2585weight approx.: 28500motor: 30 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 5.858,-- - metarial feeding table EURO 5.100,-- - oil coiler STD. - center support EURO 18.750,-- - side supports EURO 12.500,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) Njdpod Ab Rhofx Amyowi We have many references!

Condition: new, Year of construction: 2026, neu 2026 070235 Nwodpfx Aewirz Ssmyoi September 2026, Zwischenv Türkei 4800 € 500 kg 1200 mm 400 mm 550 mm 300 mm 50 mm 80 mm 0.55 kW 1400 mm 1200 mm 1550 mm 190 kg motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control ALTERNATIVES (prices on request): Version with pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm

Condition: good (used), Double reel, reel, unwind reel -Unwind reel: Double reel with 2 servo motors (each reel driven individually) -Drive: 2 Nucleus NUDrive MP85 10A Bgr2 R Rev2 IP64 servo motors -Reel: Ø 1050 mm Nwsdpfx Asylil Esmyji -Photos: see photos -Dimensions: 1050/840/H1755 mm -Weight: 200 kg

Condition: good (used), Feeder for round material, round material feeding system, round steel feeding system, motorized reel for round material for eccentric press, hydraulic press for straightening machine, wire straightening machine, unwinder straightening machine combination, unwind reel, wire unwinder, double reel, reel, unwind reel, motorized reel for wire processing, punch press, eccentric press, hydraulic press, automatic punch press, motor reel, winding reel, unwind reel, wire unwinder -Round material feeding system: Round steel feeding system with console -Feed: Drive Lenze 2.2 kW type MDXMA2M Belt tension: pneumatic -Material stress: hydraulic Nsdpfx Amsi Exp Ejyewi -Tension rollers: for Ø approx. 25 mm -Individual components: see photos -Hydraulic power unit: can be supplied for an additional charge -Transport dimensions: 900/500/H780 mm -Weight: 332 kg

Condition: good (used), Year of construction: 1996, Reel, unwind reel, motorized reel for sheet metal processing, motor reel, unwind reel, sheet metal unwinder, strip feeder, strip feeder for eccentric press, hydraulic press -Handover: in its current condition as inspected Nsdoitdikopfx Amyswi -Condition: without drive motor, without control unit, see photos -Manufacturer: Cisam Impianti, FEEDER belt feeding system -Type: 1000/2B -Passage: 395 mm -Transmission: Ratio 68.37:1, max. 251 Nm -Pneumatic cylinder contact force: 1.6 tons -Individual components: see photos -Dimensions: 1340/920/H1690 mm -Weight: 829 kg