Used Condensate Drain for sale (1,583)

Year of construction: 2026, condition: used, New display machine! Stationary piston compressor with refrigerant dryer, condensate drain, oil-water separator and pre-/fine filter. The universal solution with belt drive and high-quality features. Especially suitable for craftsmen. These compressors are used where compressed air quality, durability, and efficiency are essential. Long service life thanks to two-stage high-performance units with low speed, specially machined cast cylinders for minimal oil consumption and extended lifespan, high-performance valves, optimum cooling via large fan wheel, motor with overload protection, easy condensate drainage using the standard-mounted 1/2" ball valve, standard equipped with Condor pressure switch and manometer, mounted as standard on a safety pallet with anti-vibration mounts. Technical data: Suction capacity 650 l/min, output capacity 520 l/min, max. pressure 10 bar, tank volume 270 l, cylinders/stages 2/2, speed 920 min-1, motor power 4 kW / 400 V, weight approx. 197 kg Location: Rieth Ledpfx Aloyw Thvjbsah

Condition: excellent (used), Year of construction: 2016, KAESER Energy-Saving Refrigerant Air Dryer, Model TB 26 SECOTEC Volume flow: 2.55 m³/min | Pressure dew point: 3 °C | Refrigerant: R-513A Volume flow (m³/min) 2.55 Pressure dew point (°C) 3 Pressure drop (bar) 0.20 Electrical power consumption at 100% volume flow (kW) 0.62 Electrical power consumption at 50% volume flow (kW) 0.34 Electrical power consumption at 10% volume flow (kW) 0.1 Min. overpressure (bar) 3 Max. overpressure (bar) 16 Min. ambient temperature (°C) 3 Max. ambient temperature (°C) 43 Max. inlet temperature, compressed air (°C) 55 Width (mm) 620 Depth (mm) 540 Height (mm) 963 Weight (kg) 116 Compressed air connection G 1 Laedpfxozrhizo Alboh Condensate drain connection G 1/4" Electrical supply 230 V / 1 phase / 50 Hz Refrigerant R-513A Refrigerant charge (kg) 0.53 CO2 equivalent (t) 0.33 Global warming potential (GWP) 631 Energy-saving control Refrigerant storage Location: available from warehouse 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, New compressed air dryer KAESER TBH 14 with electronically controlled condensate drain Year of construction: 2024 Technical data: Flow rate: 1.20 m³/min Pressure dew point: 3°C Overpressure: 3 to 16 bar Ambient temperature: +3°C to + 50°C max. Compressed air inlet temperature: + 60° C Compressed air connection: G 1/2" Dimension (W x D x H): 462 x 525 x 548 mm Weight: 33 kg Lajdpjtqm S Rsfx Albjh electrical supply: 230 V / 1 / 50 Hz Visit our business premises in Erlangen. You will find a large number of used and new compressors on over 450 square meters of exhibition space.

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, volume flow: 124 m³/h, Exhibit: RENNER RKT + 0125 compressed air dryer with time-controlled condensate drain Year of manufacture: 2022 Volume flow: 2.08 m³/min (at 7 bar and ambient temperature of 25°C) Pressure dew point: 3°C max. pressure: 16 bar Connection thread: G 1 1/4" Dimensions: Length: 345mm Width: 525mm Height: 851mm Weight: 45kg Convenient leasing for new machines is possible through our bank. Visit our store. We always have a large selection of new and used compressors in stock! Lodpfxju Iwc Rs Albsah Visit our business premises in Erlangen. You will find a large number of used and new compressors on over 450 square meters of exhibition space.

Year of construction: 2022, condition: new, new KAESER compressed air tank 250 liters standing, galvanized 11 bar (with fittings) Year of construction: 2023 High-quality compressed air tank in galvanized design. Galvanized inside and outside according to DIN EN ISO 1461 in immersion bath. Connecting piece for conical threads. Technical specifications: Volume: 250 liters Overpressure max: 11 bar -Diameter: 500 mm Container height: 1545 mm Mass: 84 kg Connection compressed air inlet: G 3/4 " Connection compressed air outlet: G 3/4 " Connection safety valve: G 3/8 " Lodpeiqyl Nefx Albsah Connection condensate drain: G 1 1/2 " Container acceptance: RL2014 / 29 / EU Min. Operating temperature: - 10 ° C Max. Operating temperature: + 80 ° C Surface coating: galvanized For new machines comfortable leasing via our house bank possible. Visit our shop. We always have a large selection of new and used compressors in stock!

Condition: used, Year of construction: 2016, Suction capacity approx. 850 l/min Filling capacity approx. 680 l/min Ledpfx Alsy Ifmrjboah Compressed air tank 10 bar Tank capacity Tank capacity 2 x 100 l Tank surface galvanized Mounted on safety base plate Including refrigerated dryer, fine filter, automatic condensate drain

Condition: used, 1) PVC Double Head Welding Machine – Emmegi Fusion 2LV3440 Year of manufacture: 2011 Double head welding machine for PVC profiles. Machine in perfect working condition, regularly maintained annually, complete with manual. 2) PVC Corner Cleaning Machine – Emmegi / Rinaldi Trimmer E Year of manufacture: 2011 Automatic corner cleaning machine for PVC profiles, equipped with lateral support arms. Machine in working condition, regularly maintained, complete with manual. 3) Glazing Bead Cutting Machine – Emmegi Microbo 4200 DX Year of manufacture: 2008 Cutting machine dedicated to glazing beads, designed to ensure precision and repeatability. Included equipment: Roller conveyor Electronic control system Machine in working condition, regularly maintained, complete with manual. 4) Single Head Cutting Machine – OMG mod. Bifra 550 Year of manufacture: 2006 Blade diameter: 550 mm Roller conveyors included Measuring handwheel included 5) Reinforcement Screwdriver Machine – Emmegi Fissa A Year of manufacture: 2012 Screwdriver machine for metal reinforcements used in window and door production. Machine in working condition. 6) Testing and Glazing Table – Emmegi Vitro Year of manufacture: 2008 Table dedicated to testing and glazing operations for window frames. Machine in working condition. 7) Compressed Air System – NEW Year of manufacture: 2024 – never used Complete system for compressed air production and treatment, consisting of: Boge C12-2LF screw compressor, soundproofed, 11 kW, inverter, air flow from 530 to 2,020 l/min, super-silent version Vertical galvanized tank 725 liters, max pressure 10.8 bar, complete with safety valve and pressure gauge Electronic timed drain valve MTA CA Condensate water/oil separator MTA LP04 Compressed air dryer MTA DE-XG027, air flow 2,700 l/min 8) 4-Axis Machining Center – MECAL MC 304 ATLAS Year of manufacture: 2007 4-axis machine equipped with front working unit, specifically designed for aluminium processing. Maximum working length: 7430 mm X-axis working stroke: 7210 mm Y-axis (transversal) stroke: 550 mm Z-axis (vertical) stroke: 500 mm A-axis (rotating spindle axis): rotation range ±180° 9) Double Head Cutting Machine – TEKNA TK 145 Year of manufacture: 1994 Blade: Ø 500 mm Laedsywkc Rspfx Albjh Max cutting length: 4000 mm Blade inclination: outward 10) Cantilever Rack Structure Double-sided cantilever system, 1 double-sided block, 9 levels per side: Height: 9 m Max load per column side: 8,100 kg Max load per arm: 900 kg each 11) Single Head Copy Router – Rinaldi Magnum 360I Year of manufacture: 2003 The machine allows processing on four sides without repositioning the workpiece, ensuring maximum precision and operational continuity.

Condition: used, Year of construction: 2003, Manufacturer : Martin Christ Gefriertrocknungsanlagen GmbH Model: EPSILON 2-6D Year: 2003 Type : Laboratory and pilot freeze-dryer Applications: Dry or liquid drying in vials, bottles, ampoules, flanges, trays, etc. Examples of products: Biological products: bacteria, viruses, tissues, plant extracts / Pharmaceutical products: plasma, serum, antibodies, vaccines / Biochemical tests / Food products: ferments, vitamins General data : Pre-freezing, freeze-drying (sublimation) and final drying Vacuum application, < -10°C 3 + 1 shelves Area per shelf: 23 x 30 cm = ± 0.06 m² Distance between shelves: 68 mm Software: SCADA Software Cleaning flange Sample extraction system Manual stopper for vials Ice condenser : Ledpfx Aleygndpsbeah Capacity: 8.0 kg Performance: 6.0 kg / 24 h Temperature: -75°C Dimensions : Width: 800 mm Depth: 840 mm Height: 1640 mm Weight: ~650 kg Energy data : Power supply: 3-phase, 400 V / 50 Hz Power consumption: max. 5.0 kVA Max. ambient temperature: +25°C Refrigerant : Types : R404A, R508, Isceon 89 Heat transfer fluid: Syltherm XLT Technical connections Warm water inlet: ½" hose connection Defrost water drain: ½" hose connection Vacuum exhaust: DN 25 stainless steel pipe Ventilation: DN 6 connection Autres : Documentation and qualifications available Sold with LPC plus computer for data analysis. Spare parts

Condition: as good as new (ex-display), Year of construction: 2025, KAESER compressed air tank 5000 liters standing, galvanized 11 bar include fittings Year of construction: 2025 High-quality compressed air tank in galvanized design. Galvanized inside and outside according to DIN EN ISO 1461 in immersion bath. Connecting piece for conical threads. Technical specifications: Volume: 5000 liters Overpressure max: 11 bar -Diameter: 1400 mm Container height: 3570 mm Mass: 1050 kg Connection compressed air inlet: 2x DN 100 Connection compressed air outlet: 2x DN 100 Connection safety valve: G 2 " Connection condensate drain: G 1/2 " Lodpfx Aokzkfrjlboah Container acceptance: RL2014 / 29 / EU Min. Operating temperature: - 10 ° C Max. Operating temperature: + 50 ° C Surface coating: galvanized For new machines comfortable leasing via our house bank possible. Visit our shop. We always have a large selection of new and used compressors in stock!

Condition: as good as new (ex-display), Year of construction: 2026, machine/vehicle number: Aircenter SM16_1425, Exhibit immediately available: New Kaeser Aircenter SK 16 - 10 bar screw compressor with integrated refrigeration dryer and 270 liters compressed air tank Control Sigma Control 2 Year: 2026 Operating hours: 1 hr Pressure: 10 bars Rated power: 9 KW Delivery quantity 10 bar: 1.36 m³/min Sound level: 66 dB(A) Compressed air outlet: 3/4" Compressed air tank: 270 liters volume Pressure dew point refrigeration dryer: + 3°C Electrically level-controlled condensate drain: ECO DRAIN Dimensions length x width x height: 630 x 1220 x 1720 mm Weight: 440 kg Ledpfx Alok Adbkobeah Visit our store. We always have a wide ran

Condition: used, CTS   Type: T-30/950 Ex/I   CTS Temperature Test Chamber, Explosion-Proof   Control: 32-bit controller LCD control panel Digital display of setpoint and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for on-site control of the test item   Temperature tests:   Temperature range: -30°C to +80°C Temperature deviation: ±0.3 K over time Temperature change rate:   Heating: 2 K/min Cooling: 1.5 K/min up to -10°C   Heat radiation: approx. 1000 W at +20°C approx. 200 W at -25°C   Nitrogen inerting with residual oxygen monitoring With nitrogen inerting, the test chamber is initially purged with a large volume of N2 until the oxygen content is less than 3%. After that, it switches to a base flow rate (approx. 10% of the large volume). The nitrogen flow rate of the base flow is measured, displayed, and monitored using a flow meter and limit switch. The O2 monitoring continuously extracts gas from the test chamber via a flame arrester and feeds it to an O2 sensor, which monitors the residual oxygen content of the extracted air. The gas is then passed through a second flame arrester and returned to the test chamber. The extraction pump is monitored using a volume flow meter. Further details can be found in the operating manual from Dräger in the appendix.   The gas system is currently out of operation!   The technical data refer to an ambient temperature of +25°C, rated voltage 400V, without test item, without irradiation, and without additional equipment.   Dimensions: Test volume: 950 liters Test chamber dimensions: height approx. 700 mm / width approx. 900 mm, depth approx. 1500 mm External dimensions: height approx. 2400 mm / width approx. 1270 mm, depth approx. 3125 mm   Operating data:   Electrical connection: 400V+6/-10 %, 3/N, 50 Hz Rated power: 21.6 kW Rated current: 36.5 A   Protection class: IP 54 Laedpfxjzd Rzwj Albjh   Condensate drain: unpressurized, R 1/2" internal thread   Sound pressure level: < 62 dB(A)   (according to DIN EN ISO 3744 measured at a distance of 1 m from the front)   Weight: approx. 1500 kg, control cabinet approx. 300 kg   External refrigeration unit   Refrigerant: R404A / R23   For your security as a buyer, the following information:   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of supply: (See picture)   (Changes and errors in the technical data and specifications are subject to change!)   We are happy to answer any further questions by telephone.

Condition: ready for operation (used), Year of construction: 1995, Used compressed air refrigeration dryer. Before being decommissioned, the refrigeration dryer was checked for functionality by a refrigeration technician. Subsequently, 18 kg of R22 refrigerant (2 bottles) were extracted and disposed of. All records are available. Afterward, a small amount of nitrogen was added. Lsdpjfy Trhefx Alboah We can gladly have the dryer refilled with new refrigerant (e.g., R407C) for you. !! The selling price does not include refrigerant !! Manufacturer: Sabroe Model: SV 1010 AB Type: 50 A Max. flow rate: 55 m³/min (3340 m³/h) Pressure drop at max. flow rate: 0.38 bar Refrigerant weight: 18 kg (currently without refrigerant) Max. pressure, refrigerant side: 16/25 bar Air connection: DN 100 Condensate drain: Beko 2x 3/4 inch Max. pressure, compressed air side: 16 bar Max. flow rate Max. temperature: Compressed air: 60°C Power consumption with fans: 7.1 kW Voltage: 400 volts Dimensions (width/depth/height): 1880 mm / 1100 mm / 2000 mm Weight: 835 kg

Condition: used, mytron Type: TS 1800 Temperature control system Technical data: External dimensions: 2120 x 2300 x 1300 W x H x D in mm Reservoir volume: approx. 1800 liters Temperature range: -40°C to +40°C Operating temperature: -40°C Temperature sensor: Remote sensor with 7-meter cable length Cooling: Lsdpjzdr Edsfx Albeah Cooling water inlet: 1 1/4" - socket Cooling water outlet: 1 1/4" - socket Cooling water consumption: approx. 40 l/min Condensate drain: 1/2" - ball valve Power connection: 400V, 50 Hz Power consumption: approx. 34 kVA Fuses: 3 x 35.0 AT, 1 x 6.0 AT, 1 x 4.0 AT Safety device: Over-temperature protection, fixed at 50°C Under-temperature protection, fixed at -50°C Fault indication via red signal lamp Communication: Profibus (on 9-pin SUB D connector) Air intake nozzle, top: 500 x 250 mm Air outlet nozzle, bottom: 500 x 250 mm Weight: approx. 920 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss Type: SC 450 Weiss corrosion testing device / salt spray testing chamber for corrosion tests, salt spray tests, and condensation water tests with Liebisch / Weiss control system Data according to the nameplate: Manufacturer: Weiss Umwelttechnik GmbH Type: SC 450 Device No.: available Electrical data: Voltage: 1/N/PE AC 230 V ±10% / 50 Hz Rated power: 2 kW Rated current: 8.7 A Test chamber data according to manufacturer's documentation: Test chamber volume: approx. 480 liters Test chamber height with hood: approx. 1190 mm Test chamber height without hood: approx. 740 mm Width to spray nozzle: approx. 750 mm Depth: approx. 570 mm External dimensions according to manufacturer's documentation: Height with hood: approx. 1370 mm Height without hood: approx. 920 mm Width: approx. 1930 mm Depth: approx. 800 mm Technical data: Salt solution tank: approx. 180 liters Temperature range for salt spray test: 5 K above ambient temperature up to +50 °C Temperature range for condensation water test: 5 K above ambient temperature up to +45 °C Temperature stability over time: ±1 K Compressed air: min. 4 bar / max. 10 bar Weight empty: approx. 180 kg Control / Operation: Liebisch Labortechnik control panel S!MCON/32 control and regulation unit Color touch panel Digital setpoint and actual value display Operating and error display Programmable test sequences Testing options: Salt spray test according to DIN EN ISO 9227 / DIN 50021 Condensation water test according to DIN EN ISO 6270-2 / DIN 50017 Corrosion test Material test Surface test Quality assurance Equipment: Corrosion-resistant polyethylene housing GFK test chamber Acrylic glass nozzle in the spray nozzle Heated compressed air humidifier Flow and dosing system for salt solution Salt solution storage tank Test specimen holder / support tubes Floor grate Measurement and connection fittings Exhaust connection Condensate drain Condition: Used equipment from industrial use. Optical condition according to the pictures. Inspection and testing on site are possible after arrangement and are expressly desired. Scope of delivery: (See picture) Ledozbatropfx Albeah Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We are happy to answer any further questions by telephone.

Condition: used, Year of construction: 2007, operating hours: 66,031 h, functionality: fully functional, type of input current: three-phase, power: 800 kW (1,087.70 HP), input voltage: 400 V, type of cooling: water, input frequency: 50 Hz, input current: 80 A, MWM / Deutz TCG 2016 V16 CHP Unit – Approx. 800 kWe – Natural Gas For sale: complete MWM / Deutz TCG 2016 V16 CHP unit, year 2007, suitable for operation on natural gas. The unit has approximately 66,031 operating hours. The last major service was performed at approximately 48,000 operating hours. The CHP unit will only be sold after the engine overhaul has been completed. Work included before delivery Prior to delivery, the following work will be carried out: - Complete overhaul of the MWM TCG 2016 V16 engine - Overhaul of the electric pumps - Cleaning of the exhaust gas cooler - Cleaning of the condenser The generator was tested while the unit was still in operation and was found to be in good working order. The unit is currently disconnected from the gas supply. The oil and cooling water have been drained in preparation for the overhaul, so the engine and complete CHP unit can no longer be demonstrated running in its current condition. Main specifications - Manufacturer: MWM / Deutz - Model: TCG 2016 V16 - Year: 2007 - Fuel: Natural gas - Electrical output: approx. 800 kWe - Generator: Marelli - Generator rating: 1,300 kVA - Grid frequency: 50 Hz - Control system: TEM Evolution - Operating hours: approx. 66,031 h - Last major service: approx. 48,000 h Scope of supply The unit is offered as a complete CHP package and includes: Ledpfsz E A Rwex Albsah - MWM / Deutz TCG 2016 V16 gas engine - Marelli generator - TEM Evolution control system - Gas train - Generator switchgear - Heat recovery equipment - Exhaust gas cooler - Condenser - Associated installation components supplied with the unit The unit is suitable for grid-parallel operation and can also be prepared for island / stand-alone operation if required. Complete service and technical documentation A complete maintenance history is available, including: - Full service logbook - Maintenance records - Oil sample reports - Electrical schematics - P&ID drawings - Technical and maintenance documentation Technical performance data for this engine type is also available, including information on electrical efficiency, gas consumption, thermal output, and total CHP efficiency. Installation and commissioning available In addition to supplying the CHP unit, CHP Solutions can also provide installation and commissioning on site. Depending on the project requirements, we can offer support with: - Positioning and installation of the CHP unit - Mechanical installation - Electrical installation - Gas connection - Cooling and heat-recovery connections - Grid connection - Start-up - Commissioning - Preparation for grid-parallel or island operation This means the CHP can be supplied not only as a unit, but also as part of a complete installed and commissioned energy solution. The unit is located in the Netherlands and can be inspected by appointment. For further technical information, documentation, photos, installation options, or a complete project quotation, please contact CHP Solutions.

Condition: used, CTS Type: T-40/2000 Air-cooled temperature test chamber Technical design: Refrigeration unit: air-cooled, low-noise, hermetically sealed, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A Door: fully opening door, left-hand door stop, one-hand operation, lockable. Insert shelf: stainless steel, support area 970 x 980 + 500 mm load per shelf max. 35 kg total load with max. shelf load 100 kg Test chamber lighting: 3x halogen lamp 20 W, 12 V Control: 32-bit controller LCD control panel Digital display of setpoint and actual values Numerical input of setpoints Plain text error messages RS 232 interface free switching channels for on-site control of the test item Temperature range: -40°C to +180°C Rated voltage: 400V 3/N 50Hz Rated power: 10.4 kW Rated current: 17.2 A Compressor: TFH2516Z Pipe connection NW 50 Control panel Window 570x710 mm Electrical connection, cable length 5m Technical performance data: Temperature tests: Temperature range -40°C to +180°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 1.5 K/min Heat radiation: approx. 2500 W at +20°C approx. 2100 W at ± 0°C approx. 1500 W at -20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test item, without radiation and without additional devices. Dimensions: Test volume: 2000 liters Test chamber dimensions: height 900, width 975, depth 2200 mm External dimensions: height 1950, width 1290, depth 3145 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 17.2 kW Protection class: IP 22 Condensate drain, non-pressurized, R 1/2" internal thread Sound pressure level (according to DIN EN ISO 3744 measured at a distance of 1m from the front) < 55 dB(A) Weight: approx. 1200 kg For your safety as a buyer, the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Laodjzg Twaopfx Alboh Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: as good as new (ex-display), Year of construction: 2025, new compressed air tank 1000 litres standing, galvanized 11 bar (with fittings) incl. container papers Year of construction: 2025 High-quality VIG compressed air tank in galvanized design. Specifications: -Volume: 1000 liters -Ab. Operating pressure: 11 bar -Medium: Air -Diameter: 800 mm -Container height: 2348 mm -Weight: 200 kg -Connection compressed air inlet: 2 x G 2" -Connection compressed air outlet: 2 x G 2" -Connection safety valve: G 1/2" -Connection condensate drain: G 1 1/2" -Maintenance opening: 1 x hand hole 100x150 mm Manufacture and testing according to EC Directives 2009/105/EC & AD 2000 Laodpsv Ak Tnsfx Albsh Design temperature: -10 °C to + 50°C Surface coating: galvanized Visit our shop. We always have a wide range of new and used compressors in stock!

Condition: used, Weiss Technik Salt spray chamber / corrosion test cabinet Weiss Technik SaltEvent SC 1000 Corrosion test equipment / salt spray test chamber For sale is a used Weiss Technik SaltEvent SC 1000 salt spray chamber. The device is suitable for corrosion tests, salt spray tests, material testing, surface testing, quality assurance, as well as research and development. Technical data Manufacturer: Weiss Technik GmbH Type: SaltEvent SC 1000 Device type: Salt spray chamber / corrosion test equipment Year of manufacture: 2019 Test chamber size: Size 1000 liters Rated voltage: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.6 kW Rated current: 11.3 A Customer-side fuse: 16 A slow-blow Weight: approx. 370 kg Overall dimensions according to layout drawing: approx. 2910 × 900 × 960 mm Max. test chamber load: 150 kg Floor grid load: 150 kg Insertion rods: 8 kg per rod Shelf for machine part covers: 5 kg Temperature range salt spray test: Ambient temperature +5 K to +50 °C Temperature range condensation test: Ambient temperature +5 K to +42 °C Temperature compressed air humidifier: Ambient temperature +5 K to +70 °C Temperature stability over time: ±1 K Salt solution consumption during salt spray test: approx. 0.5 to 1.5 l/h Equipment S!MPAC control system WEBSeason / color control panel Ledpfjzg Er Asx Albjah Touch operating panel Test chamber hood Storage tank Control cabinet Floor grid / test chamber grid Compressed air humidifier Hood locking Temperature monitoring Interface Documentation as shown in the pictures Connections / media supply Power connection: 230 V / 50 Hz Compressed air connection available Connection for demineralized water available Exhaust connection available Water drain / condensate drain available Application areas Salt spray test Corrosion test Condensation test Material testing Surface testing Coating testing Automotive Quality assurance Research and development Condition Used Optical condition as shown in the pictures. Scope of supply 1x Weiss Technik SaltEvent SC 1000 salt spray chamber Storage tank Accessories as shown in the pictures Documentation as shown in the pictures The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Inspection possible by appointment. Loading with a forklift is available. Shipping or freight forwarding is possible. Subject to change, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, CTS Temperature Shock Chamber / Temperature Test Chamber CTS TSS-70/130 Temperature Shock Chamber Water-cooled temperature shock chamber, approx. 130 liters For sale is a used temperature shock chamber from the manufacturer CTS Clima Temperatur Systeme GmbH. The test chamber is suitable for temperature shock tests, cyclic temperature tests, material testing, quality assurance as well as development and stress tests. Technical data Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TSS-70/130 Device type: Temperature shock chamber / Temperature test chamber Test volume: approx. 130 liters External dimensions: approx. 2335 x 940 x 1820 mm (W x D x H) Internal dimensions: approx. 1990 x 940 x 1652 mm (W x D x H) Test chamber dimensions: approx. 480 x 660 x 410 mm (W x D x H) Window: approx. 300 x 300 mm Weight: approx. 950 kg Temperature range, hot chamber: +50 °C to +200 °C Temperature range, cold chamber: -80 °C to +100 °C Temperature change rate: max. 100 K/min on average Changeover time: < 10 seconds Ramp-up rate: ≤ 15 min in the range of -65 °C to +200 °C Heating rate: approx. 6 K/min from room temperature to +180 °C Cooling rate: approx. 4 K/min from room temperature to -60 °C Temperature deviation (time): ±1 K Temperature deviation (spatial): ±2 K Power connection: 400 V 3/N / 50 Hz Power: 16.6 kW Rated current: 28.0 A Fuse rating: 32 A slow-blow Protection class: IP22 Refrigerant, precooling stage: R404A Refrigerant quantity, precooling stage: 4.0 kg Refrigerant, cooling stage: R23 Refrigerant quantity, cooling stage: 0.6 kg / 10 bar Operating pressure PS: 25 bar Water-cooled version Cooling water connection required Compressed air connection required Operation only possible with cooling water and compressed air Cooling water inlet: 3–6 bar Equipment CTS control panel Microprocessor-controlled control and monitoring system Program operation Digital setpoint and actual value display RS232 interface RS485 interfaces Potential-free contact Digital inputs and outputs Hot and cold chamber Mobile frame with screw drive Test chamber / mobile frame made of stainless steel Insert tray made of stainless steel wire Pipe penetration NW 50 with sealing plug Compressed air connection 1/4" male thread Condensate drain R 1/2" female thread Safety door locking Lockable door with viewing window Documentation / operating manual Accessories according to images Lajdpfx Aezf Ibkelboh Application areas Temperature shock testing Cyclic temperature testing Material testing Electronics testing Component testing Aging tests Quality assurance Research and development Condition Used Optical condition according to images Scope of delivery 1x CTS TSS-70/130 temperature shock chamber Insert tray / test chamber equipment Available documentation / documents Operating manual Accessories according to images Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Objects, machines or other accessories shown in the images that are not explicitly described are not included in the scope of delivery. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We are happy to answer any further questions by telephone.

Condition: used, CTS Climate testing chamber T-70/600, water-cooled Temperature range: -70°C to +180°C Rated voltage: 400V 3/N PE 50 Hz Rated power: 6.7 kW Rated current: 10.2 A Compressor: TFH2480Z/TFH2511Z, refrigerant R23/R404A Control: -Microprocessor-controlled regulation and monitoring system -Simple, user-friendly terminal integrated into the door. -Digital display of setpoint and actual temperature Easy adjustment via +/- buttons -Digital input for temperature in °C -PLC compatible -Up to 100 test programs possible -RS 232 interface -2 free switching channels for on-site test item control Lasdeziycbopfx Alboh Insert rack: Stainless steel, support surface 820 x 710 mm Load per rack max. 35 kg Total load with max. rack capacity 100 kg Refrigeration unit: Water-cooled, low-noise, fully hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to 10.3 K over time Temperature change rate measured in the center of the test chamber according to DIN 50 011, Part 12 Heating 2.5 K/min Cooling 2 K/min Heat radiation max. 1500 W at +20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test item, without radiation and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions 850 x 830 x 850 mm (W x D x H) External dimensions 1050 x 1850 x 1900 mm (W x D x H) Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 6.7 kW Rated current: 10.2 A Protection class IP 22 Condensate drain, unpressurized R 1/2" internal thread Sound pressure level < 62 dB(A) Weight approx. 400 kg For your safety as a buyer, the following information! The following points are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will gladly answer any further questions you may have by telephone.

Year of construction: 2018, condition: excellent (used), Vötschtechnik ClimeEvent C/480/70/15 Climate Testing Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: ClimeEvent C/480/70/15 Machine Type: Climate Testing Chamber / Temperature Testing Chamber Test Chamber Volume: approx. 480 liters Temperature Range: -72 °C to +180 °C For sale is a used Vötschtechnik ClimeEvent C/480/70/15 climate testing chamber in a water-cooled version. Suitable for temperature and climate testing, environmental simulation, material testing, quality assurance, as well as development, aging, and stress tests. Temperature and humidity profiles, as well as automatic test programs, can be executed via the touchscreen control. Technical Data: Test Chamber Volume: approx. 480 liters Temperature Range: -72 °C to +180 °C Heating Rate: approx. 17 K/min Cooling Rate: approx. 15 K/min Max. Heat Compensation at +20 °C: approx. 8,000 W Climate Range: +10 °C to +95 °C Humidity Range: 10 to 98 % RH Dew Point Range: +4 °C to +94 °C Refrigerant: R449A / R23 Refrigerant Quantity: 4.00 kg / 2.30 kg Mains Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated Power: 24 kW Rated Current: 43 A Cooling: Water-cooled version Cooling water inlet and outlet Connection for demineralized water Overflow and condensate drain Dimensions: External dimensions according to the installation plan (W × D × H): approx. 2,807 × 1,000 × 2,020 mm Transport dimensions with overhangs (L × W): approx. 2,857 × 1,115 mm Equipment: Touchscreen control / WEBPanel Program and manual test operation Temperature and humidity control Stainless steel interior Viewing window Test chamber lighting Shelves / Insert levels Side test chamber openings RS232, RS485 / RS422 and USB Lsdoz Airfopfx Albjah Status, alarm and maintenance display Program management and report function Transport Data: Transport dimensions: approx. 2,857 × 1,115 × 2,020 mm Weight according to series documentation: approx. 1,350 kg Shipping by freight forwarder possible Condition: Used Workshop inspected Optical condition as shown in the pictures. Scope of Delivery: Vötschtechnik ClimeEvent C/480/70/15 Shelves as shown in the pictures Available documentation / Operating manual Accessories as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: new, Year of construction: 2025, machine/vehicle number: MASM13T, Stock machine available immediately New Kaeser SM 13 T - 10 bar screw compressor with integrated refrigeration dryer with ECO-Drain (level-controlled condensate drain) Ljdpfeix Akpex Albsah Control: SIGMA CONTROL 2 Year: 2025 Pressure: 10 bars Rated power: 7,5 kW Delivery quantity at 10 bar: 1.08 m³/min Sound level: 65 dB(A) Compressed air outlet: 3/4" Dimensions length x width x height: 630 x 1090 x 1100 mm Weight: 315 kg Operating hours: 0 hrs Visit our store. We always have a wide range of new and used compressors in stock!

Condition: new, Year of construction: 2025, operating hours: 1 h, machine/vehicle number: MA0145_1375, Exhibit immediately available: New Kaeser Aircenter SK 16 - 8 bar screw compressor with integrated refrigeration dryer and 270 liters compressed air tank Control Sigma Control 2 Year: 2025 Operating hours: 1 hr Pressure: 8 bars Rated power: 9 KW Delivery quantity 7,5 bar: 1.61 m³/min Sound level: 66 dB(A) Compressed air outlet: 3/4" Compressed air tank: 270 liters volume Pressure dew point refrigeration dryer: + 3°C Electrically level-controlled condensate drain: ECO DRAIN Dimensions length x width x height: 630 x 1220 x 1720 mm Weight: 440 kg Visit our store. We always have a wide range of new and used compressors in stock! Ledpfx Aeh Ey N Uslbsah

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 13 h, machine/vehicle number: MA0114_1010152, Exhibit: New Renner RSDK-B 4.0 screw compressor system with integrated refrigeration dryer with painted 270 liter container with time-controlled condensate drain Operating pressure: 10 bar Delivery rate at 10 bar (ue): 530 l / min Rated power drive motor: 4.0 kW Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 part 13): 70 dB (A) Length: 1490 mm Width: 536 mm Height: 1115 mm Weight: 270 kg Compressed air connection: G 1/2 " Compressed air tank (ECN according to AD2000): 270 l volume, painted Power connection refrigeration dryer: 230 V AC Pressure dew point refrigeration dryer + 3 ° C Time-controlled condensate drain Visit our store. We always have a large selection of new and used compressors in stock! Lajdeg Uwttepfx Alboh

Condition: used, Weiss   Weiss ShockEvent D/210/a/V1   Type of equipment: Temperature-controlled shock testing chamber   Testing principle: Stationary test chamber with supply of warm, cold, and ambient air via flaps Lasdjz Rwk Repfx Alboh   Test chamber volume: approx. 210 liters   Usable test chamber width / height according to installation plan: 700 / 500 mm   Installation dimensions according to installation plan (W × D × H): approx. 1,480 × 1,670 × 1,967 mm, plus space for attachments   Weight: approx. 1,350 kg   Temperature range, warm chamber: +50 to +225 °C Temperature range, test chamber, warm phase: +50 to +200 °C Temperature range, test chamber, cold phase: −65 to 0 °C Temperature range, cold chamber: −70 to 0 °C   Heating rate: 18 K/min, i.e. 18 °C Cooling rate: 2 K/min, i.e. 2 °C   Temperature deviation over time: ±0.3 to ±0.5 K in steady state Temperature homogeneity spatially: ±0.5 to ±1.5 K   Heat compensation, cold phase: max. 6,000 W at −20 °C Heat compensation, warm phase: 0 W   Maximum load, test chamber floor: 100 kg, evenly distributed   Maximum number of insert baskets: 7 pieces Maximum load per insert basket: 7.5 kg Maximum total load of insert baskets: 50 kg Distance between insert baskets: 50 mm   Operation: WEBPanel touch display with WEBSeason®   Remote control: via computer, smartphone, or tablet   Interfaces: Ethernet, USB, and digital I/O   Power connection: 3/N/PE AC 400 V ±10 %, 50 Hz; actual design according to nameplate   Other connection options according to instructions: 380 V / 50 Hz or optionally 440 V / 60 Hz Rated power: 31.9 kW Rated current: 57 A On-site protection: 63 A slow-blow fuse Protection class, control cabinet and operating unit: IP23   Cooling: water-cooled Cooling water connections: Supply and return, each 1" internal thread   Cooling water temperature: +12 to +28 °C Cooling water pressure: 2.5 to 6 bar Differential pressure, cooling water circuit: over 2 bar   Cooling water consumption under full load with 18 °C inlet and 10 K heating: 2.9 m³/h Cooling water consumption under full load with 28 °C inlet and 5 K heating: 5.8 m³/h   Maximum heat dissipation to the cooling water: 33.7 kW Maximum heat dissipation to the installation room: 1 kW   Compressed air supply: 4 to 10 bar overpressure Compressed air connection: quick-release coupling DN 7.2 Compressed air temperature: +2 to +50 °C   Condensate drain: hose connection Ø 8 mm   Sound pressure level: approx. 63 dB(A)   Permissible ambient temperature during operation: +10 to +35 °C   Permissible relative humidity at the installation location: max. 75 %   Refrigerant: R449A 3.5 kg R469A 2.5 kg   Shipping or freight transport possible. Subject to changes, errors, and prior sale.   We will be happy to answer any further questions by telephone.