11 bar tank 250 liters

KAESER

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, Auction of two Kaeser screw compressors, one Kaeser refrigeration dryer, and one compressed air tank! Screw compressor Kaeser SK 22 Year of manufacture: 2020 Iisdezktnyspfx Aa Esd Screw compressor Kaeser SK 19 Year of manufacture: 1995 Refrigeration dryer Kaeser TB 26 Year of manufacture: 2016 Compressed air tank Volume: 500 l Year of manufacture: 1986

Condition: new, Year of construction: 2025, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 2.16.B250 for 30,000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve or rotary valve for dust disposal using big bags. Iiedpodrtalsfx Aa Ejd Solenoid valve control with differential pressure display for optimum adjustment of filter cartridge cleaning. Maintenance doors as swing doors Maintenance easy.

Year of construction: 2008, condition: good (used), Complete compressor and air station Manufacturer: KAESER Models: AS 36 / TC 31 Year : 2008 Iodegw Diajpfx Aa Esid Working pressure 7,5 bar

Condition: as good as new (ex-display), Year of construction: 2022, Kaeser screw compressor SM 13 - 11 bar exhibition piece at a special price Volume flow at 11.0 bar (g) 1.07 m³/min Electrical power consumption of the entire system at 11.0 bar (g) 9.63 kW Specific power 9.00 kW/(m³/min) Maximum overpressure 11.0 bar Drive motor efficiency at full load 91.7% Drive motor efficiency class IE4 Nominal drive motor power 7.5 kW Drive motor speed 2955 rpm Drive motor protection class IP 55 Electrical supply 400 V / 3 Ph / 50 Hz Iodpfx Aaevk R A Se Ejid Compressed air outlet temperature above ambient temperature (at +20°C, 30% relative humidity) 8 K Sound pressure level 65 dB(A Compressed air connection G 3/4 Location: From stock 54634 Bitburg - available immediately -

Year of construction: 2019, condition: new,

Condition: new, Year of construction: 2022, Kaeser screw compressor SK 22 - 11 bar - exhibition piece - Volume flow at 11.0 bar (g) 1.67 m³/min Electrical power consumption of the entire system at 11.0 bar (g) 13.7 kW Max. overpressure 11.00 bar Drive motor efficiency at full load 91.2% Drive motor efficiency class IE3 Drive motor rated power 11.0 kW Drive motor speed 2960 rpm Drive motor protection class IP 55 Electrical supply 400V / 3 / 50Hz Compressed air outlet temp. above ambient temperature (at +20°C, 30% relative humidity) 6 K Sound pressure level 66 dB(A) Max. usable warm air volume 2500 m³/h Compressed air connection G 1 Cooling oil capacity 7.0 l Cooling oil type compressor SIGMA FLUID MOL Dimensions (W x D x H) 750 mm x 895 mm x 1260 mm Weight 312 kg Location: from stock 54634 Bitburg - available immediately - Isdpfsvk R Dcex Aa Ejid

Year of construction: 2010, condition: excellent (used), Kaeser SM 9 – 11 bar screw compressor Manufacturer: Kaeser Type: SM 9 Machine type: Oil-injected screw compressor Year of manufacture: 2010 Condition: Used screw compressor, ready for operation Max. operating pressure: 11.0 bar Delivery rate: 0.75 m³/min Motor rated power: 5.5 kW Compressed air connection: G 3/4 Electrical connection: 400V / 3Ph / 50Hz Dimensions W x D x H: approx. 630mm x 800 mm x 900 mm Sound pressure level: 64 dB(A) Location: In stock at warehouse 54634 Bitburg - immediately available - Iijdpfx Aohy Tzyja Esd

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Iiedpfx Aajfz U S Ee Ejd Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Condition: like new (used), Kaeser M30 PE screw compressor on a trailer The unit is in perfect condition, like new. The unit was purchased from a warehouse and has never been used. Only 50 hours of operation. Technical specifications: Operating pressure: 7 bar 18.2 kW motor Automatic start Capacity: 3 m3/min Iijdpjzlaa Eofx Aa Eod Weight: 595 kg Year of manufacture: 2022/12

Condition: ready for operation (used), Year of construction: 1999, A Kaeser rotary screw compressor with an integrated refrigeration dryer is offered. Power: 7.5kW, max. operating pressure: 7.5bar, refrigeration dryer: TU11, refrigerant: R134a, refrigerant charge: 0.490kg. Dimensions X/Y/Z: approx. 680mm/780mm/1300mm, weight: approx. 270kg. Inspection by appointment is possible. Iiodpfxozmh Tce Aa Eed

Condition: good (used), Pressure vessel 11 bar, 1500 Liter litre Ijdpog A Hc Hsfx Aa Eoid

Condition: ready for operation (used), Year of construction: 2005, The following are offered: 3x Kaeser compressors, 1x Gieb compressor, 1x Atlas Copco compressor and 1x Maschinen- und Behälterbau pressure vessel. 1) Gieb compressor, 750/250-11, year of manufacture: 2005, max. operating pressure: 11bar, intake capacity: 750l/min, power requirement: 4.0kW. 2) 3x Kaeser EPC 630-150 compressors, year of manufacture: 1995, max. operating pressure: 10bar, displacement: 630l/min, motor power: 3.0kW. 3) Atlas Copco LT compressor with sound enclosure, operating pressure: 15bar. 6) Maschinen- und Behälterbau pressure vessel, volume: 350l, year of manufacture: 1997, max. operating pressure: 16bar, temperature range: -10°C to +50°C. An on-site inspection is possible. Isdpszmh Uajfx Aa Eeid

Year of construction: 1998, condition: used, Second-hand machine Year of manufacture: 1998 Features and technical specifications: - Max. operating pressure: 10 bar - Compressed air receiver: 250 l - Maximum sound pressure level: 76 dB(A) - Theoretical suction volume: 630 l/min - Effective delivery rate at 6 bar: 440 l/min - Number of cylinders: 2 - Speed: 1,450 rpm - Oil capacity: 1.2 l - Oil top-up quantity: 0.22 l - Motor: 3 kW / 400 V - Max. switching frequency: 20/h - Start-up: Direct start Weight 240 kg Iijdpfezk Nyfex Aa Ejd Availability: at short notice Storage location: 63934 Röllbach

Condition: new, pressure 500 t column daylight 600 mm stroke 600 mm table surface area 3500 x1500 mm 600 mm feed down 8 mm/sec feed up 16 mm/sec travel on the bed 2200 x 900 mm total power requirement 30 kW weight of the machine ca. 28 t 2. STANDARD EQUIPMENT FRAME - Welded steel frame - Frame and plates are precision-milled using a CNC milling machine - Chrome-plated cylinder - Worktop with threaded holes HYDRAULICS - Bosch Rexroth hydraulic pump - Hydrapack or Badestons hydraulic directional control valve - Hydraulic block in accordance with EN standards - 1000-liter hydraulic oil tank - Pressure adjustment via pressure transmitter/regulator ELECTRICS - Control cabinet in accordance with EN standards - All cables are labeled and clearly arranged - All electrical components are from Siemens CONTROL PANEL - Stroke control in any position - X, Y, and Z-axis movement via remote control - Stroke adjustment via sensor Iodpfx Aasfv Awhe Ejid SAFETY - The machine complies with the EC safety standards 2006/42/EC Machinery Directive, EN ISO 16092-01 and 16092-03 - Two-hand operation - Emergency stop button - Safety rope with switch around the press 4. TRANSPORT AND INSTALLATION – The price includes transport costs, installation, and training at the customer's factory. – Hydraulic oil is not included in the price. – All handling costs (e.g., crane, forklift, etc.) are borne by the buyer. 5. WARRANTY – The machine has a 2-year manufacturer's warranty. – This warranty covers the delivery of all spare parts required for repair and service of the machine. Damaged parts will be returned to the manufacturer after replacement with a new part. – This warranty does not cover parts damaged due to improper use.

Condition: ready for operation (used), Year of construction: 2022, A Kaeser compressed air system is offered. 1) Kaeser SM13 rotary screw compressor, year of manufacture: 2022, power: 7.5kW, max. working pressure: 11bar, controller: Kaeser Sigma Control 2, operating hours: 1328h, load hours: 426h. 2) Kaeser Secotec TB 19 refrigerated dryer, year of manufacture: 2022, min./max. working pressure: 3bar/16bar, compressed-air inlet temperature range: 3°C to 55°C, refrigerant: R-513A, refrigerant charge: 0.56kg. 3) OKS Otto Klein air receiver, year of manufacture: 2021, receiver volume: 250l, max. working pressure: 11bar, operating temperature range: -10°C to 80°C, receiver diameter: approx. 500mm, receiver height: approx. 1580mm, weight: approx. 85kg. Viewing by appointment is possible. Ijdpfezl U Nzex Aa Ejid