Used Circulating Thermostat Cc2 -55 To +100°C for sale (73,796)

Condition: good (used), Year of construction: 2000, Arburg 270 C 400-100 (2000) Clamping force: 40 t Screw diameter : 20 mm Distance between tie bars : 270 x 269 mm Shot weight : 25 g Type : horizontal Fpodpfxsxqfi Ao Akyon Drive : hydraulic Working hours : 138000 h

Condition: good (used), Weiss climate testing chamber with seat pulsator Manufacturer: Weiss Type: SD 1400/+20 DU Test chamber: Material: Stainless steel Dimensions: Height approx. 800 mm Width approx. 2000 mm Depth approx. 900 mm Volume: 1440 liters Outer housing Material: Double-coated Zincor sheet Dimensions: Height approx. 2000 mm Width approx. 2200 mm Depth approx. 2000 mm H x W x D 2000 x 2200 x 2000 mm Paint finish: Light grey (RAL 9002) Door, double-leaf: Hinged on the left and right Equipment: Pass-through in the floor and ceiling: 2 each, DN 100 mm, for inserting the pulsation tables Pass-through in the side walls: 1 each, left, right, 100 mm Refrigeration unit: Air-cooled Control: Digital measurement and control system DMR Basic control panel: Integrated into the main switch panel Fpsdpexbgrgsfx Akyen Interface: RS 232 C, for connection to a PC Software: Operating software for MS-Windows Performance data: Temperature range without climate control: +20...+100 °C Temperature stability without climate control: +0.2 … +0.5 K (time-dependent) depending on the range, in the steady state Temperature range with climate control: 20...+95 °C Temperature stability with climate control: +0.2 … +0.5 K (time-dependent) depending on the range, in the steady state Dew point range: 20...+94 °C Humidity range: 10...98 % RH Humidity stability: +3 ... +5 % RH, depending on the range, in the steady state Temperature change rate measured in the outlet without a test specimen and without a load - Cooling: 0.5 K/min. on average, between +100 and +20 °C - Heating: 0.5 K/min. on average, between +20 and +100 °C The performance data refer to an ambient temperature of max. +25 °C and the specified rated voltage For trouble-free operation of the system, the ambient temperature must be between +10 and +35 °C Connections / Other Protection class: IP 32 for the control cabinet Sound pressure level during free-field measurement at a distance of 1 m in front of the device: 60 dB (A) Humidification water: fully demineralized, conductivity max. 20 μS/cm, pH value 6 - 7, automatic topping up Condensate drain: back-pressure-free, 3/4" hose connection Power connection: 400 V; 3 PH+N PE; 50 Hz Connected load: max. 10 KVA Weight: approx. 1160 kg Seat testing device with steel structure for mounting and securing to the climate testing chamber, including: • 2 pneumatic weight lifting devices (150 mm stroke) for test specimen change, 12 weights each weighing 5 kg • 1 base frame in normal steel welded construction for attachment to the underside of the climate testing chamber. This frame is provided on all sides with removable sheets and has 2 folding doors for adjusting the eccentricity. These doors have safety switches. • 2 eccentric disks with bearings and tachometer, 2 connecting rods, 2 ball guides • 2 mounting tables, perforated, 20 mm grid, 650 x 650 mm, for connecting the test specimens, made of aluminum, thickness min. 10 mm • 2 mounting plates, perforated, 20 mm grid, 200 x 200 mm, for connecting the buttocks replica • 2 load rods, 600 mm long, made of stainless steel (The connection to the test specimen is not included in our price, but can be offered subsequently after a precise definition) • 2 three-phase motors, 2 belt drives with tensioning devices • 1 pneumatic control system with 2 manual valves, one filter-regulator unit and one shut-off valve, 1 electrical control cabinet with 2 SEW frequency inverters, hand switch, emergency stop button, 2 push buttons,

Condition: ready for operation (used), Year of construction: 2016, operating hours: 33,793 h, clamping force: 4,000 kN, screw diameter: 80 mm, overall weight: 31,000 kg, product length (max.): 10,259 mm, Hydraulic injection moulding machine manufactured in 2016. This Engel Victory 3550/400 tech features a clamping force of 4000 kN and an injection unit with a screw diameter of 80 mm. It includes a fully hydraulic tiebarless clamping system and advanced automation with conveyor belts. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 3550/400 tech machine we have for sale. Contact us for further details. • Injection unit: 3550 • L/D ratio: 25 • Control unit: ENGEL CC300 (21.5" Full HD touchscreen) • Drive system: ECODRIVE SHV3-HSI, 2 pump systems, accumulator • Electrical connection: 3 x 400 V + N + PE, 50 Hz • Nominal connected load: approx. 282 kW • Clamping system: Tiebarless, fully hydraulic ENGEL clamping system • Centering: 160 mm • Ejector stroke: 250 mm • Hydraulic core pulls: 2 on moving platen, 2 on stationary platen • Vacuum/compressed air circuits: 4 on moving platen with Venturi nozzle and pressure switch Fpsdpfx Akoz Dgpbeyen • Pneumatic valve: 2/2-way valve R 1/4" on stationary platen • Pneumatic mold valve control: 4-fold FESTO, up to 16 bar • Mold heating: 32 control zones, max heating power 43 kW • Screw drive: Electromotoric, speed-controlled, max 150 rpm, rated power 47 kW, torque 3700 Nm • Nozzle radius: 15 mm • Nozzle bore: 6 mm • Nozzle contact force: approx. 150 kN • Metering stroke: 390 mm • MuCell equipment: MuCell Advanced Package; cylinder L/D 24/25; MuCell G25 screw Ø 80 mm; gas injector bore; melt pressure sensor; RS-485 interface to SCF gas plant; emergency stop connection • Mold temperature control: 3 ENGEL flomo distributors with 8 zones each (24 monitored circuits total) • Hydraulic tank capacity: Main tank approx. 690 l; suction tank approx. 290 l • Robot interface: Euromap 67 / AN-146 • Languages: Czech and German Additional equipment • Including GEKU robot

Condition: like new (used), Year of construction: 2019, CAP 30 APPLICATOR 1000 SLIM FOR HELICAP 23 PRO: Fsdpfx Akjyynd Royspn YOM 2019 VERSION 400v 9.000 RUNNING HOURS NEW CONDITION

Condition: good (used), Reinhardt LTV 100 Oven, 200°C Manufacturer: Reinhardt Type: LTV 100 Usable volume: 0.65 m³ Steam volume: 1.04 m³ Output: 10.56 kW Fresh air exchange rate: 1 l/min Loading system with 7 supports, size W x D: 770 x 850 mm Voltage: 380 V Operating temperature: 50°C - 200°C Nominal temperature: 130°C Dimensions H x W x D: 2050 x 1650 x 1180 mm Chamber: H x W x D: 1000 x 800 x 950 mm You can find more new and used items in our shop! Fsdpfexbf T Nex Akyepn International shipping costs available upon request!

Condition: new, Pressing force: 100 t Maximum stroke: 380 mm Working width between columns: 1100 mm Cylinder diameter: 220 mm Diameter of the piston rod: 90 mm Diameter of the piston head: 120 mm Pressing speed: 2.47 mm/s Feed speed: 7.54 mm/s Fedpfx Akjhauyysyepn Retraction speed: 9.06 mm/s Motor power: 2.2 kW Machine dimensions L x W x H: 1665 x 865 x 2140 mm Weight: 970 kg Accessories / Special features: • Adjustable cylinder • Chrome-plated, hardened piston with detachable base • Integrated pressure gauge • Pressure regulation • Two speeds and regulating valve • Adjustable work table • Joystick for operating the piston • Hand pump with dual operation for highly precise pressing operations • CE compliant Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D-44143 Dortmund - Wambel

Condition: new, pressure: 100bending length: 3020column width: 2555daylight: 530stroke lenght (max.): 300column throat depth: 450messurements (LxWxH): 3725x2260x2780weight approx.: 85504 axes (Y1, Y2, X, R): Ja alle Achsen über die Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die CNC Steuerung Esa S630 (2D Grafik Steuerung)motor power: 11 Standard equipment: KK Kletzer Europe We have put together a high-quality model for Europe. The CNC press brake KK kletzer Made in Turkey. Model KKI EUROPE XL The powerful EUROPA XL press brake is characterized by its high precision, accuracy and versatility. Europa XL has a very large installation height and, as a result, a large stroke (cylinder travel). The projection is also above average in order to restrict yourself as little as possible. We rely on quality, which is also reflected in the management. As a standard control we have the high-quality Esa S640 (2D graphic control) Furthermore, the press brake KKI Europa XL is equipped with Y1, Y2, X and R CNC axes via the control. Of course, the CNC crowning control Esa S640 (2D graphic control) is also included. We don't make any compromises when it comes to the upper tool and the die either the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is only as good as the service. For this reason we set our focus on highly qualified employees with many years of experience in the CNC sheet metal processing sector. CNC axes Y1, Y2 , X and R axis Esa S640 (2D graphic control) Back gauge with double linear guide and ball screw Motorized crowning device with CNC control Fedpfxed En Rxj Akyopn 2 pieces of support arms in front, heavy version, height adjustment with hand wheel, from 175 tons heavy version on linear guide Laser safety device on the upper beam CE protective equipment various options available Other controls: ESA 640 2D 15'' touch screen control                                           ¤ 4,520.00 ESA 675 W 3D 21'' touch screen control (Windows Base)           ¤ 6,485.00 DELEM 66 T 2D 17'' touch screen control (Windows Base)        ¤ 10,165.00 DELEM 69 T 3D 17'' touch screen control (Windows Base)        ¤ 16.350,00 KK Industries GmbH There's something for everyone!

Condition: used, Year of construction: 2019, operating hours: 4,160 h, VOLVO EC 55 TRACKED EXCAVATOR Imported / Accident-FREE IN VERY GOOD CONDITION! ? YEAR OF PRODUCTION: 2019 ? BETRIEBSSTD. 4160 Std EQUIPMENT: ? Radio ? AIRCONDITION ? Joysticklenkung ? Hydraulikleitung für Schnellwechsler ? Hydraulikleitungen für Hammer/Greifer/Schere ? Rückfahrkamera Fodpfx Aksxb Iv Tsyspn TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ?????

Year of construction: 2018, condition: excellent (used), functionality: fully functional, For sale are 10 GARANT ZeroClamp clamping devices, type 10012. The clamping devices are used, in good condition, and fully functional. New price per unit: €661.20 plus VAT. Available for sale individually or as a complete package. If you are interested or have any questions, please do not hesitate to contact us. Inspection possible by appointment. Fodpfxoz E Rdfj Akyjpn Shipping and inspection are possible! Product details Technical data Series: ZeroClamp Manufacturer's designation: ZeroClamp clamping device, type: 10012 Clamping device diameter: 120 mm Maximum clamping force: 25 kN Material: Steel Indexing hole available: no Product type: Clamping device Identification & Classification Article number: 360040 10012 EAN / GTIN: 4045197415820 Manufacturer's number: 360040 10012 Description Design: All components are made of stainless or corrosion-resistant steel. The zero-point clamping of the GARANT ZeroClamp system is an important function for modern manufacturing systems, especially in automated manufacturing. Thanks to a special contact interface, it guarantees precise and reliable zero-point repeatability. The pneumatic clamping force of the system holds workpieces securely in the desired position, allowing for quick and accurate workpiece changes without re-positioning. This reduces setup effort and increases productivity. The zero-point clamping of the GARANT ZeroClamp system is essential for efficient manufacturing processes. Learn more about the innovative technology of GARANT ZeroClamp and optimize your production. Application: For individual installation in clamping fixtures.

Year of construction: 2026, condition: as good as new (ex-display), IMMEDIATELY AVAILABLE!!!! Manual cleaning is performed using special gloves in the front area. The effectiveness of the cleaning is ensured by a high-pressure pump and a special spray nozzle. In these devices, a temperature of up to 60 °C can be set for the cleaning fluid. The pressure can be adjusted from 1 to 80 bar. Technical data: Working area: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg, optional up to 150 kg Spray pressure: adjustable from 1-100 bar Tank volume: 75 liters / heating power 2 kW Standard version: Fpsdpfx Asf A D Nmskysn • Blower gun inside • Frame, feet, lid, and housing made of stainless steel • Removable stainless steel sheets above the tank • Top-opening flap with 2 handles and gloves • Window made of tempered glass • Door opening/closing system with support from gas springs • Monitoring of door opening by means of a safety limit switch • Filter on the suction side of the pump (500 microns) • Foot switch for operating the cleaning pump • Interior lighting • Neoprene gloves, length 600 mm (chemical resistant) • Adjustable feet +/- 50 mm Optional: • Candle filter made of stainless steel with pump (10/25/50 microns) • External mini-pneumatic oil separator

Year of construction: 2018, condition: excellent (used), ESPEC PL-4J Climate Testing Chamber / Temperature Testing Chamber Manufacturer: ESPEC Corp. Fpodpfx Aozntunokysn Type: PL-4J Equipment Type: Climate Testing Chamber / Temperature Testing Chamber Year of Manufacture: 2018 For sale is a used temperature and climate testing chamber from the manufacturer ESPEC. The device is suitable for temperature and climate tests, environmental simulations, material tests, quality assurance, as well as development and stress tests. Technical Data Manufacturer: ESPEC Corp. Type: PL-4J Temperature Range: -40 °C to +100 °C Humidity Range: 10 to 98 % RH Test Chamber Volume: approx. 800 liters Heating Rate: approx. 3 K/min Cooling Rate: approx. 2 K/min Internal Dimensions (W × H × D): approx. 1000 × 1000 × 800 mm External Dimensions (W × H × D): approx. 1410 × 1970 × 1273 mm Power Connection: AC 400 V / 3~ / 50 Hz Max. Power Consumption: 21 A Weight: approx. 610 kg Refrigerant: R452A Refrigerant Quantity: 1.16 kg + 0.36 kg Equipment Touchscreen control Temperature and humidity control Program control Stainless steel interior Viewing window Interior lighting 100-mm cable gland Water-cooled condenser Castors for easy transport Application Areas Temperature testing Climate testing Environmental simulation Material testing Quality assurance Electronics testing Research and development Endurance and aging tests Workshop testing The climate chamber has been workshop tested. Functional testing performed. Humidity system repaired. Documented test run successfully completed. Scope of Delivery ESPEC PL-4J Climate Testing Chamber Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age and use. Note Collection or shipping by freight forwarder is possible by arrangement. Subject to changes, errors and prior sale.

Year of construction: 2020, condition: excellent (used), ESPEC PL-4J Climate Testing Chamber / Temperature Testing Chamber Manufacturer: ESPEC Corp. Type: PL-4J Equipment Type: Climate Testing Chamber / Temperature Testing Chamber Year of Manufacture: 2020 For sale is a used temperature and climate testing chamber from the manufacturer ESPEC. The device is suitable for temperature and climate testing, environmental simulations, material testing, quality assurance, as well as development and stress tests. Technical Data Manufacturer: ESPEC Corp. Type: PL-4J Temperature Range: -40 °C to +100 °C Humidity Range: 10 to 98 % RH Test Chamber Volume: approx. 800 liters Heating Rate: approx. 3 K/min Cooling Rate: approx. 2 K/min Internal Dimensions (W × H × D): approx. 1000 × 1000 × 800 mm External Dimensions (W × H × D): approx. 1410 × 1970 × 1273 mm Power Connection: AC 400 V / 3~ / 50 Hz Max. Power Consumption: 21 A Weight: approx. 610 kg Refrigerant: R452A Refrigerant Quantity: 1.16 kg + 0.36 kg Features Touchscreen Control Temperature and Humidity Control Program Control Stainless Steel Interior Fpsdozntxmepfx Akyon Viewing Window Interior Lighting 100 mm Cable Entry Water-Cooled Condenser Rollers for Easy Transport Application Areas Temperature Testing Climate Testing Environmental Simulation Material Testing Quality Assurance Electronics Testing Research and Development Endurance and Aging Tests Workshop Testing The climate chamber has been workshop-tested. Functional test carried out. Humidity system repaired. Documented test run successfully completed. Scope of Delivery ESPEC PL-4J Climate Testing Chamber Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age and use. Note Collection or shipping via freight forwarder possible by arrangement. Subject to changes, errors and prior sale.

Condition: ready for operation (used), Siemens SITRANS F C MASSFLOW MASS 2100 FDK: 083L2551 flow meter, SN:200271N284, used, normal signs of use, 100% functional, delivery as shown in photos. Fjdpfx Asz Acugskyopn

Condition: ready for operation (used), Siemens SITRANS F C MASSFLOW MASS 2100 FDK: 083L2551 flow meter, SN:287171N094, used, normal signs of use, 100% functional, delivery as per photos. Fsdpfx Aoz Acumekyspn

Condition: excellent (used), Year of construction: 2006, load capacity: 225 kg, arm reach: 2,550 mm, IRB6600 Serie's upper arm extenders and different wrist modules will allow customization to each process. As the robot can bend fully backwards, the working range is greatly extended and the robot fits well into dense production lines. The IRB 6600 is ideal for process applications, regardless of industry. Typical areas can be Spot Welding, Material Handling and machine tending. Year: 2006 Cabinet: NOT Included (Works with IRC5 - we can try to find one for you) Teach Pendant: NOT included but we can try to find one for you Signalling & Power Cables: Included Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman. Please note that the price does not include shipping costs. Fodsq Apkaepfx Akyjpn (Source: ABB's Website)

Condition: used, Year of construction: 2024, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. MINI-BMS 105 / Forestry Mulcher / incl. OQ45-5 / incl. CUT CONTROL / 5-10 t / DEMO unit / in stock and immediately available / very good condition Price: €20,090.00 net / €23,907.10 gross - Working width: 1.05 m - Total width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulching attachment for excavators - For mulching along riverbanks, in forests, and other hard-to-reach areas - Mulches brushwood and woody material up to 10 cm Ø - For excavators from 5 to 10 tons - Suitable for mounting to various adapter plates - Drive designed for hydraulic motor, depending on the carrier's oil flow - Indirect V-belt drive with 5 V-belts - Reinforced chassis made from wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along entire hood length - Front guard with chains - Rear guard with chains - Support skids, height-adjustable, reinforced with a carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 228 – Forestry rotor with fixed MINI DUO tools (2 carbide inserts) Fodpfxjy Rdnao Akyspn 21 pcs, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 291 VARIO FLOW Axial piston hydraulic motor with variable displacement 29–58 cm³ and overpressure valve - Displacement in cm³ (min-max): 29 – 58 - Required hydraulic pressure in bar (min-max): 150 – 250 - Required oil flow in l/min (min-max): 60 – 130 Intermediate adapter for BE314 Z1 incl. OQ45-5 adapter plate - Approx. 200 mm height We have many additional adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. We stock a wide range of Seppi products, available for immediate delivery! Please contact us for more information at / . Financing options available upon request. We are official sales and service partners for: - Seppi M. - Holp - Magni telehandlers - Gierking GMT - OilQuick - Weber MT - Westtech - DMS - JCB construction machinery - Mercedes-Benz - Iveco With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi range! Errors and prior sale excepted! Internal reference number: 170051 = Further information = Please contact Marius Herden for more details.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 7,358 h, functionality: fully functional, machine/vehicle number: 6LUD00036, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, feed length X-axis: 620 mm, feed length Y-axis: 620 mm, feed length Z-axis: 460 mm, feed rate X-axis: 36,000 m/min, feed rate Y-axis: 36,000 m/min, feed rate Z-axis: 36,000 m/min, torque: 108 Nm, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece length (max.): 500 mm, workpiece width (max.): 400 mm, workpiece height (max.): 350 mm, workpiece diameter (max.): 680 mm, workpiece weight (max.): 300 kg, total height: 3,400 mm, total length: 4,600 mm, total width: 2,700 mm, table width: 600 mm, table height: 755 mm, table length: 600 mm, table load: 300 kg, rotary table diameter: 600 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 12,000 rpm, overall weight: 8,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 5,303 h, coolant supply: 18 bar, distance table center to spindle nose: 50 mm, spindle motor power: 17,000 W, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 100, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Commissioned 4/2014 Table rotation, C-axis: 360° Table swivel, B-axis: -50° to +110° Distance from spindle nose to table: 150 mm Fsdpfsz Diq Uex Akyepn Table clamping surface: Ø 650 Table load capacity, max.: 300 kg Table slots: 5 x 18H7 x 100 mm Centering bore: Ø 50 H7 x 30 mm Workpiece size, max.: Ø 520 x 330 mm Machine accuracy: VDI I DGQ 3441* Positioning accuracy: +/- 0.006 mm* Axis resolution: 0.001 mm* *determined at a constant ambient temperature of 20°C +/- 1°C Main spindle: Main drive, AC motor, direct drive Drive power (100% / 25% ED): 10.0 / 17.0 kW Speed range, stepless: 20 - 12000 rpm Spindle taper: SK 40 DIN 69871 Torque at (100% / ED): 63.7 / 108.6 Nm Axis drives: Axes X, Y, Z: AC motors Axes B, C: AC motors Travel speeds: Rapid traverse in axes X, Y, Z: 36 m/min Speed, max. B-axis: 25 rpm Speed, max. C-axis: 25 rpm Acceleration X, Y, Z: 6.5 m/s² Coolant system: External tool cooling via external nozzles Coolant tank: 280 l Operating pressure, external: 0.9 bar Coolant system, internal tool cooling DIN 69871 Form A Operating pressure, internal coolant supply: 18.0 bar Manual rinsing of the work area via an additional gun Standard accessories: - CNC control: Heidenhain iTNC 530, full simultaneous 5-axis version - Handwheel 410 (Heidenhain) - Digital axis drives - Digital spindle drive - Swarf conveyor with discharge height 800 mm • Spindle cooling – radiators – plate cooling for spindle motor - Full protective enclosure with cabin roof Tool magazine VZG 65 5A by Indunorm: Number of tools: 100, with a tool length of up to 320 mm / can be converted to 125 tools, then a tool length of only 200 mm is possible. Tool diameter, max.: 80 mm Tool diameter, max.: 130 mm (with free adjacent positions) Tool change with double gripper - Linear path measuring system in axes X / Y / Z (glass scale) - Direct encoder in axes B / C - Temperature compensation - IR measuring probe – 3D Software - Option - iTNC 530 Kinematic-Opt • Calibration software Internal tool cooling 18 bar • Coolant tank • Internal tool cooling: 280 L DIN 69871 Form A • Double-circuit filter • Switchable filter cartridges • Filtration rate: 10 µm Band filter system PRODUCTION - LINE - RT 100 Automatic pallet changing system Loading and unloading via a linear axis system: Handling data: Handling weight, max.: 100 kg (35 kg) Pallet capacity: 6 pallet positions up to 400 x 400 mm: Control: PLC control with integrated control cabinet incl. switching and control components incl. software for the automatic sequence Zero point clamping system 320 x 320 x 60 mm - Clamping via 4 clamping bolts - Axis distance: 180 mm - Clamping force: 4 x 12500 N - Repeatability: 0.005 mm - Axial load, max.: 4000 kg • Zero point clamping plate 320 x 320 - Automatic door Interface for automation and clamping systems Universal interface for automatic pallet changing systems, force clamping devices and zero point clamping systems • for pneumatic clamping systems • 2-channel rotary feedthrough integrated in the table • Pneumatic lines led to the outside • Pneumatic maintenance unit • Control via M commands logical inputs and outputs prepared incl. 7 pallets 320x320 with 6 vices and one 3-jaw chuck !!without tool holders and without tools!! Machine ex works, without delivery and assembly, all information without guarantee, price plus statutory value-added tax.

Condition: ready for operation (used), CRE Rösler Electronic CDFM150BX08 monitor A01-10169 SN: 1000951 / 100-245V AC / 40W, used, in good condition, 100% fully functional, delivery as shown in photos. Fpodpox Eq Ensfx Akysn

Condition: ready for operation (used), Indramat MAC063D-0-JS-4-C / 095-A-0/WI518LV Permanent Magnet Motor SN: MAC063-25511, used, in good condition, fully functional, scope of delivery as per photos. Fjdjx Etyuspfx Akyjpn

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Fpedpfxoy Hkd Ho Akyen Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Year of construction: 1987, condition: used, x-travel 2800 mm y-travel 800 mm Fpedpfot Hw I Njx Akysn z-travel 1300 mm weight of the machine ca. 3 t

Condition: excellent (used), Vötsch Fpodpfx Akjziizajyon Type: VT 3050 Modules / Test Chamber Temperature Chamber Air-cooled Test chamber capacity 500 litres Temperature range -30°C / +100°C Temporal temperature fluctuation K ±0.5 Spatial temperature fluctuation K ±1.5 Temperature gradient K 3 Change rate Heating K/min 2.0 Cooling K/min 1.4 Heat compensation max. W 650 Calibration values +23°C +80°C Test chamber dimensions Width 710 mm Depth 590 mm Height 1250 mm External dimensions Width 940 mm Depth 1030 mm Height 1955 mm Sound pressure level db(A)

Condition: used, mytron Type: T2240 Water-cooled temperature chamber Technical Data: External dimensions: Width 1435 mm, Height 1955 mm, Depth 2590 mm Test chamber dimensions: Width 1050 mm, Height 1400 mm, Depth 1600 mm Test chamber volume: approx. 2240 l Cable entry ports: 2 x 100 mm right 2 x 100 mm left Temperature range: –40 °C to +100 °C at 23 °C ambient temperature Temporal temperature constancy: +/- 0.5 °K Spatial temperature constancy: +/- 1.0 °K Cooling: water cooling Inlet and outlet: 1" internal thread Cooling water shut-off via solenoid valve when unit is OFF Fault indicator for refrigeration unit errors Cooling water consumption: inlet temperature approx. 15 °C, approx. 15 l/min, outlet temperature approx. 22 °C (with continuous cooling approx. 27 °C) Fedpszizg Ujfx Akyspn Power connection: 3NPE AC 50 Hz 400 V, 32 A CEE plug Power consumption: approx. 6.5 kVA Fusing: 3 x 20.0 AT, 3 x 10.0 AT Lighting: 25 watts each, left and right sides of test chamber Exhaust connection: DN 100 mm plug-in system Safety device: electronic over-temperature protection, fixed setting Smoke detection with alarm sound Viewing window: five-layer glass, 130 x 360 mm Refrigerant: R 404 A, approx. 10 kg Weight: approx. 850 kg Condition: used Scope of delivery: (see picture) (Specifications subject to change and error!) If you have further questions, we would be glad to answer them by phone.

Condition: good (used), The scope of delivery includes: 1x used pallet racking beam Material color: orange IPE profile: 100 x 55 mm Connector: 3 holes Clear width: approx. 2,700 mm 3 holes per connector Hole spacing: approx. 100 mm Hole diameter: approx. 11 mm 1x set of fastening material consisting of: 06x screws M10 06x nuts 06x washers Fpjdeibzftepfx Akysn

Condition: new, Manufacturer: Schmersal Product series: PROTECT PSC1 Type: PSC1-C-100-FB1-PNPS Article number: 103011996 Device type: Programmable safety controller Supply voltage: 24 V DC Safety level: PL e Fjdpezcguxsfx Akyopn Safety level: SIL 3 Safe inputs: 14 Safe semiconductor outputs: 4 Signal outputs: 6 Safety relay outputs: 2 Communication protocols: EtherCAT, Ethernet/IP, PROFINET IO, PROFIsafe Mounting type: DIN rail Dimensions: 112.5 × 100 × 115 mm Weight: 630 g Available quantity: 6 pieces