Used Bertuetti Simplex 4 X Roller Dough Moulder for sale (93,462)

Condition: used, first registration: 08/2016, Year of construction: 2016, H&W galvanized carriages for bridges up to 7.82 m long with forklift mount and lifting axle 3 available!! For all bridge lengths (7,150 / 7,450 / 7,820 mm)!! Forklift mount!! • Fully galvanized / anodized carriages • Very low • 2 x air-sprung 9-ton SAF axles • Lifting / lowering system • Tires 435/50 R 19.5 • Disc brakes • Lifting axle (1st axle)! - German carriages! - 1st hand - TÜV / SP: NEW! Bdjdpswmn Uisfx Amyof Subject to errors and prior sale.

Condition: used, mileage: 261,000 km, power: 330 kW (448.67 HP), first registration: 06/2022, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: green, gearing type: automatic, Year of construction: 2022, Equipment: ABS, air conditioning, We are very pleased that our offer has aroused your interest, and we assure you that you can purchase a good and affordable vehicle with a traceable service history at our dealership! Special equipment: Engine tunnel storage compartment, high, work light, work light on the upper rear wall of the cab, audio system: CD radio (Bluetooth, USB), CB radio, cockpit classic, air horn, cab: steel-sprung, comfort, tinted windshield with band filter, speed limiter, transmission 12-speed - type: G 281-12, rear axle differential 440, info display 12.7 cm with video function, fender center panel low, fuel tank: 290 L aluminum, left, cooling capacity for hot climates, light alloy rims 9.00x22.5 (ALCOA Dura-Bright), air compressor 2-cylinder, mounting plate / saddle plate 40 mm for fifth wheel coupling, mounting plate / saddle plate 40 mm for fifth wheel coupling 20 t, reinforced engine mount, auxiliary drive MB 131-2c, frame lowering without air spring residual pressure control, frame overhang 750 mm, smoker's package, reversing warning system acoustic (warning signal outside), rear window, fifth wheel coupling, low maintenance, disc brakes with partial protection, circuit breaker, seat cover / upholstery: passenger seat velour, seat cover / upholstery: driver seat velour, seats in the cab: driver's seat sprung comfort seat, sun visor outside, 24V socket in the passenger footwell additionally, preparation for rotating beacon, preparation for reversing camera Additional equipment: Emission standard EURO 6, axle configuration: 6x4, front axle load 7.5 t, approach / front mirrors heated, trailer electrical and brake connection high, trailer socket 24V / 15-pin, Arocs 5, step on cab left, battery 170 Ah, compressed air connection in the cab, compressed air tank steel, compressed air unit with condensate monitoring, compressed air unit medium, automatic activation for headlights (light sensor), cab: tilting device hydraulic, cab: M ClassicSpace, 2.30 m, tunnel 170 mm, cab variant: ClassicSpace, cab floor with engine tunnel 170 mm, cab: width 2.30 m, cab: mounting height 600 mm, cab variant: M, stowage flap outside left, stowage compartments with lid behind driver and passenger seat, suspension: front springs 7.5 t, 2 leaves, power windows, generator 100 A, urea tank (AdBlue): 60 L, lift roof manual (steel), body / superstructure: tractor unit, comfort central locking system, fender 3-piece, power steering pump unregulated, multifunction steering wheel, steering oil cooler, air intake behind cab, air dryer heated, engine 12.8 L - 330 kW R6 diesel (OM 471), engine brake, engine variant OM 471, type of use: local distribution, wheelbase not defined, wheelbase variant 3300 mm, curb mirrors, exhaust gas heat recovery, disc brakes front and rear axle, key with remote control (2), side marker lights LED flashing, seats in the cab: passenger swivel seat, 12V socket in the passenger footwell, front bumper corners in steel design, tachograph / EG control device, Truck Data Center 7 (fleet management system), preparation for toll collection, preparation for Truck Data Center (fleet management system), front axle straight, water pump regulated, permissible gross weight 26.0 t Bdedpfszq Ttpjx Amysf GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We will organize your registration and the export documents / EUR 1 and manufacturer's declaration for export. FINANCING If you wish, we will be happy to provide you with a LEASE-PURCHASE or FINANCING OFFER.

Condition: excellent (used), mileage: 158,582 km, power: 265 kW (360.30 HP), fuel type: diesel, axle configuration: 6x4, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro5, number of seats: 3, Year of construction: 2010, Equipment: crane, Crane Number of hydraulic extensions: 6 Number of support legs: 4 Remote control: ✓ Load Hook: ✓ = More information = Number of doors: 2 Cab: single Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Double wheels Crane: EFFER 210 / 4 S + JIB 2 S, behind the cab Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. Bsdpfx Amezq Dfcsyodf If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: good (used), machine/vehicle number: 940957, Year of construction: 1992, Technical data: - Load capacity: 4 t - Usable height: 690 mm - Overall height: 800 mm - Crossbeam support made of steel structural hollow profile: 140 x 140 mm - 3 load-bearing hooks Bodozqzubjpfx Amyjdf - Grid spacing with 5 holes on the left and right: 200 mm - Overall length (approx.): 2100 mm - Overall width (approx.): 200 mm - Weight (approx.): 130 kg

Condition: good (used), Year of construction: 2005, Offer 23060 Technical Data: - Load capacity approx. 5000 kg - Solid rubber tires 6.00 - 9 Bdedpfx Amszqzrmeyjf - Platform length approx. 2980 mm - Platform width approx. 2430 mm - Platform height approx. 650 mm - Overall length with drawbar approx. 5850 mm - Overall width 2530 mm - Weight approx. 600 kg

Condition: ready for operation (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 3 kW Feed speed 5-24 m/min. Dimensions (L/W/H) 3900 x 2200 x 2000 mm weight of the machine ca. 2500 kg Weinig Profimat 23 Four-Sided Planer – Window Version (With glazing bead separation feature, or usable as a grooving spindle) ATS Control and Program Control ----- Technical Specifications Summary (Please inquire regarding any additional accessories that may be included) ----- General ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 Bedpjy Spvrjfx Amyodf > Infeed table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5–24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight (approx.): 2500 kg Spindle Arrangement ----- > Spindle 1: Bottom > Spindle 2: Right (pneumatically actuated: up/down) > Spindle 3: Left > Spindle 4: Top > Spindle 5: Bottom > Spindle 6: Glazing bead saw (pneumatically actuated: up/down) Spindle Specifications ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: Glazing bead saw (2.2 kW, 6000 rpm, 40 mm diameter) Additional Features ----- > Glazing bead separation feature (or usable as a grooving unit) > ATS Control (automatic) 2-axis positioning for width and height (left and top spindles) with program memory (99 programs) > Machine operation: Window package Joint control of the right spindle and the glazing bead outfeed via manual selector switch on the control panel > Spindles with mechanical digital displays ----- Price of the above-mentioned machine upon request! ----- Option: Used planer heads and for divide out glass bead ----- (Technical specifications according to manufacturer – subject to change/without guarantee!)

Condition: used, mileage: 412,600 km, power: 355 kW (482.67 HP), first registration: 04/2019, fuel type: diesel, empty load weight: 16,326 kg, maximum load weight: 9,674 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 5,300 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space volume: 45 m³, loading space length: 7,200 mm, loading space width: 2,500 mm, loading space height: 2,550 mm, Equipment: ABS, air conditioning, crane, cruise control, differential lock, low noise, onboard computer, parking heater, soot filter, DAF XF480 6X2*4 Flatbed/Tarpaulin with Crane First registration: 04/2019 412,600 KM with documentation Euro 6 emission standard Long-distance driver's cab with 2 beds Automatic transmission Air conditioning, auxiliary heating Adaptive cruise control Lane departure warning system Leaf/air suspension 3rd axle is a steering axle 6x2 axle configuration Wheelbase: 5,300 mm Tyres: 315/80R22.5 Flatbed/tarpaulin body dimensions (L x W x H): 7,200 mm x 2,500 mm x 2,550 mm Tail lift: D'Hollandia 2,000 kg Unladen weight: 16,326 kg Crane: Hiab X-HiDuo 188 B-2 Year of manufacture: 2019 Only 296 crane operating hours! Bdodpfx Amsxwzrgjyef Radio remote control 5th and 6th hydraulic functions for additional attachments 2 hydraulic extensions 3.20 m / 5,400 kg 4.60 m / 3,750 kg 6.40 m / 2,650 kg 8.40 m / 2,020 kg 10.40 m / 1,540 kg (mechanical extension retrofittable by manufacturer) Hook height: approx. 12 meters The vehicle is from first ownership and is in very well-maintained condition. Export/net price: €59,900 All information without guarantee, errors excepted.

Condition: used, mileage: 412,600 km, power: 355 kW (482.67 HP), first registration: 04/2019, fuel type: diesel, empty load weight: 16,326 kg, maximum load weight: 9,674 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 5,300 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space volume: 45 m³, loading space length: 7,200 mm, loading space width: 2,500 mm, loading space height: 2,550 mm, Equipment: ABS, air conditioning, crane, cruise control, differential lock, low noise, onboard computer, parking heater, soot filter, DAF XF480 6X2*4 Flatbed/Tarpaulin Truck with Crane First registration: 04/2019 412,600 KM with documentation Euro 6 emissions standard Long-distance driver cab with 2 beds Automatic transmission Air conditioning, auxiliary heating Adaptive cruise control Lane departure warning system Leaf/air suspension 3rd axle is a steering axle 6X2 axle configuration Bodpoxwzrasfx Amyedf Wheelbase: 5300mm Tyres: 315/80R22.5 Flatbed/tarpaulin body: Length: 7200mm x Width: 2500mm x Height: 2550mm Tail lift D'Hollandia 2,000kg Unladen weight: 16,326kg Crane: Hiab X-HiDuo 188 B-2 Year of manufacture: 2019 Only 296 crane operating hours! Radio remote control 5th and 6th hydraulic circuits for additional attachments 2 hydraulic extensions 3.20m / 5400kg 4.60m / 3750kg 6.40m / 2650kg 8.40m / 2020kg 10.40m / 1540kg (mechanical extension retrofittable by manufacturer) Hook height approx. 12 meters The vehicle is from first ownership and is in very well-maintained condition. Export / net price: 59,900 Euro All information without guarantee, errors excepted.

Condition: excellent (used), mileage: 158,582 km, power: 265 kW (360.30 HP), fuel type: diesel, axle configuration: 6x4, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro5, number of seats: 3, Year of construction: 2010, Equipment: crane, Crane Number of hydraulic extensions: 6 Number of support legs: 4 Remote control: ✓ Load Hook: ✓ = More information = Number of doors: 2 Cab: single Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Double wheels Crane: EFFER 210 / 4 S + JIB 2 S, behind the cab Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Bdedezqvbvspfx Amyef Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, Number of boring spindles 5 St. Bdodpfx Asx Ecguemyjf Working width 230 mm Working height 120 mm

Condition: good (used), Equipment: type plate available, Ystral Type X 11,000 S/LDT-4-154P Bdjdozp Nvwjpfx Amyjf Disperser based on the rotor-stator principle on a stand, without control unit The YSTRAL disperser is designed for the production of emulsions and suspensions in the medium-viscosity range. It meets high requirements for fine dispersion, even in the medium-viscosity range, and is used for batches up to 2,000 liters. Drive: 2,910 RPM / 11.0 kW

Condition: used, Year of construction: 2023, operating hours: 744 h, Bobcat E17 mini excavator, manufactured in 2023, with only 744 operating hours and 4 buckets! ---- * Manufacturer: Bobcat * Model: E17 * Year of manufacture: 2023 * Operating hours: approx. 744 * Includes 4 buckets * Quick coupler * Fully enclosed cabin * Adjustable undercarriage * Operating weight: 1,711 kg * Kubota diesel engine * Price: 16,900 euros, net + 19% VAT Bdsdpszp Ayvefx Amyjf ---- For further questions, please call: Erik Kortum: WhatsApp All information is subject to change without notice and does not constitute a guarantee. Errors and prior sale are reserved.

Condition: excellent (used), Technical specifications: Retrofit in 2026 Working length: 2550 mm Max. bending capacity: 6.0 mm Bending allowance: 4.0 mm Diameter of upper roller: 200 mm Diameter of lower roller: 180 mm Hydraulic folding bearing Taper bending device Control panel with digital display Motor power: 5.5 kW Dimensions (length x width x height): approx. 3600 x 1150 x 1250 mm Weight: approx. 4.5 tons Condition: Bodpfozbcwmsx Amysdf Very good, retrofit in 2026 The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2017, Technical specifications: Bdsdszfvvvepfx Amyef Working width: 6500 mm Max. bending capacity: 4.0 mm Max. bending allowance: 3.0 mm CNC control Diameter of top roller: 420 mm Diameter of side rollers: 300 mm Diameter of center bottom roller: 400 mm Conical bending unit through angled positioning of the two side rollers Mobile control panel with digital display Hydraulic folding bearings CE marking Motor power: 22 kW Dimensions (length x width x height): approx. 9200 x 2350 x 1900 mm Weight: approx. 29 tons Optional equipment: Second top roller diameter: 350 mm Side bending aid Condition: Very good condition, little used.

Condition: like new (used), Year of construction: 2001, Technical data: Working width: 2050 mm Max. bending capacity for normal steel St40: 4.0 mm Max. edge bending for normal steel St40: 2.0 mm CNC control: MG Bdsdpfxjza D U Ds Amyjf Diameter of top roller: 140 mm Diameter of side bottom rollers: 105 mm Diameter of central bottom roller: 130 mm Conical bending device Working height: 800 mm Mobile control panel Hydraulic folding bearings CE marking Motor power: 3 kW Dimensions (length x width x height): approx. 3400 x 1200 x 1200 mm Weight: approx. 2.5 tons Condition: Very good condition, very little use The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: used, Hydraulic Shear SAGITA BEYELER Capacity: 3100 mm x Max thickness 4 mm Bodpfx Amjzpyg Hsyodf Electric Back rear stop travel: 800 mm Voltage: 380 V Length: 4000 mm Width with part support: 3700 mm Width without part support: 2000 mm Total height: 1500 mm Weight: approx 5 T

Condition: reconditioned (used), Year of construction: 2015, Number of spindles 9 St. Working width 240 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 7,5 kW Working speed 6-36 m/min weight of the machine ca. 6500 kg Control CONTROL 100 PC PLUS SCM Topset XL, Year of Manufacture 2015; currently undergoing partial recondtionning in stock ----- Summary: - 9 spindles (including 4 x HSK 85 S) - Electronic horizontal and vertical positioning - 8,300 rpm - SCM "Set-up" - SCM "T-Set" - Includes workpiece infeed magazine Working dimensions: - Maximum working width: 240 mm - Minimum working width: 25 mm (reducible to 15 mm via installed special kit) - Maximum working height: 120 mm - Minimum working height: 10 mm (reducible to 6 mm via installed special kit) Special working cross-section equipment: Equipped with a special kit for extremely small minimum cutting dimensions of 15 x 6 mm. Infeed table and table surfaces: Bedjzl Hbispfx Amyedf - Infeed table length: 2,500 mm (2.5 meters) - Surface finish: Wear-resistant, special chrome-plated finish for optimal sliding properties and minimal wear. Spindle specifications: 1. Spindle: 1st horizontal spindle (BOTTOM): - Motor power: 11 kW - Speed: 6,000 rpm - Shaft: High-precision spindle, 40 mm diameter 2. Spindle: 1st vertical spindle RIGHT: - Motor power: 11 kW - Speed: 8,300 rpm - Tool mounting: Milling spindle with HSK 85S quick-change mount - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning 3. Spindle: 1st vertical spindle LEFT: - Motor power: 11 kW - Speed: 8,300 rpm - Tool mounting: Milling spindle with HSK 85S quick-change mount - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning - Tool diameter adjustment "SET UP": Electronic regulation of tool diameter, tool diameter positioning 4. Spindle: 2nd vertical spindle RIGHT: - Motor power: 11 kW - Speed: 8,300 rpm - Tool mounting: Milling spindle with HSK 85S quick-change mount - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning 5. Spindle: 2nd vertical spindle LEFT: - Motor power: 11 kW - Speed: 8,300 rpm - Tool mounting: Milling spindle with HSK 85S quick-change mount - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning - Tool diameter adjustment "SET UP": Electronic regulation of tool diameter, Tool diameter positioning 6. Spindle: 1st horizontal spindle (TOP): - Motor power: 11 kW - Speed: 8,300 rpm - Shaft: High-precision spindle, 40 mm diameter (working length 250 mm) - Tool clamping: "T-SET" quick-clamping system for tools - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning - "SET UP" tool diameter adjustment: Electronic tool diameter regulation, tool diameter positioning 7. Spindle: 2nd horizontal spindle (BOTTOM): - Motor power: 11 kW - Speed: 8,300 rpm - Shaft: High-precision spindle, 40 mm diameter (working length 250 mm) - Tool clamping: "T-SET" quick-clamping system for tools - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning 8. Spindle: 2nd horizontal spindle (TOP): - Motor power: 11 kW - Speed: 8,300 rpm - Shaft: High-precision spind...

Condition: ready for operation (used), Year of construction: 2011, Number of spindles 6 St. Working width 230 mm Working height 150 mm Length of the planing table 2000 mm Feed motor 5,5 kW Feed speed 7-36 m/min. Kuper SWT 23 XL-6 Four-Sided Planer ----- Machine fully functional tested! ... Working width min/max: 18 - 230 mm Working height min/max: 8 - 150 mm Spindle configuration: 1st Spindle - bottom ----- Power: 5.5 kW Speed: 6,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Pulley diameter: 160 mm Adjustment: axial and radial, manual 2nd Spindle - right ----- Power: 5.5 kW Speed: 6,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 160 mm Pulley diameter: min. 110 mm - max. 200 mm Adjustment: axial and radial, manual, via mechanical digital display Adjustment: vertical 35 mm below Table 3rd Spindle - Left ----- Power: 7.5 kW Speed: 6,200 rpm, including brake Spindle diameter: 40 mm Spindle length: 160 mm Cutting circle diameter (125 mm): min. 110 mm - max. 200 mm Adjustment: axial and radial manual via mechanical digital display Adjustment: horizontal 18 mm to 230 mm at 125 mm diameter, vertical 35 mm below table 4th Spindle - Top ----- Power: 7.5 kW Speed: 6,200 rpm, including brake Spindle diameter: 40 mm Spindle length: 240 mm Cutting circle diameter (125 mm): min. 120 mm - max. 200 mm Adjustment: axial manual and radial electric via mechanical digital display Adjustment: vertical 8 mm to 150 mm at 125 mm diameter, axial 26 mm Bdsdpfx Ameyyqnljysf 5. Spindle - top ----- Power: 7.5 kW Speed: 7,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Cutting circle diameter 125 mm: min. 120 mm - max. 200 mm Adjustment: axial manual and radial electric according to mechanical digital display Adjustment: vertical 8 mm to 150 mm at 125 mm diameter, axial 26 mm 6. Spindle - bottom ----- Power: 7.5 kW Speed: 7,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Cutting circle diameter 125 mm: min. 110 mm - max. 250 mm Adjustment: vertical manual according to mechanical digital display, axial manual Adjustment: Radial 8 to 150 mm with a 125 mm diameter Axially 35 mm Further features: ----- -Infinitely variable feed speed, 7-36 m/min, 5.5 kW motor -Electric height adjustment, 0.75 kW -Siemens touchscreen - Includes existing planer heads (Technical specifications provided by the manufacturer - no guarantee!)

Condition: ready for operation (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2000 mm Feed motor 4 kW Feed speed 5-24 m/min. WEINIG Unimat 23 E Planer and moulder ----- 6 spindles (with 2 rigth spindles, reinforced motors, 8,000 rpm, ATS control Machine will be cleaned and functionally checked before delivery Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle (bottom) 5.5 kW (motor replaced) ----- Diameter 40 mm Speed ??6,000 rpm Tool swing diameter 125 - 180 mm Rebating unit including tool Hardened table insert in front of 1st (bottom) spindle 2nd spindle (right) 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter 40 mm Speed ??8,000 rpm Tool swing diameter 112-250 mm Max. Tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 3. Spindle, left ----- Shared motor with 2nd spindle Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-200 mm Max. groove depth 35 mm Axially travel 80 mm Pressure shoe in front of left spindle, including spring-loaded lateral roller pressure 4. Spindle, right 8.3 kW (motor replaced) ----- Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 5. Spindle, top 7.5 kW ----- Diameter 40 mm Speed ??8,000 rpm Tool travel 112-200 mm Max. groove depth 35 mm Axially travel 45 mm Split pressure shoe in front of upper spindle, adjustable to the tool travel and pivoting away from the tool, spring-loaded. 6. Lower spindle 4.0 kW ----- Diameter 40 mm Speed ??6,000 rpm Tool travel 112-250 mm Max. groove depth 15 mm Axially travel 45 mm Spindles in general ----- All groove spindles with high concentricity. Lubrication points for the axial spindle movement. Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed infinitely variable 5-24 m/min. Feed roller in front of the first lower tool pneumatically controlled up/down, Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Adjustment travel of the feed rollers relative to the left spindle, axial 35 mm Machine electrical system ----- Operating voltage 440 V (voltage range 380 - 420 V), 50 Hz. Machine frame, tables and stops ----- Infeed table 2.0 m long (incl. jointing guide) Manual Waxilit pump for table de-resin removal One driven rubber roller (spring-loaded in the outfeed table) Two driven rollers in the machine table, hardened Machine operation ----- Pressure shoe in front of the upper spindle with mechanical digital display. Extraction after the upper spindle with mechanical digital display. ATS/System, automatic 2-axis positioning for spindles 3 and 5 Minimum working height 12 mm Electric height adjustment of the upper spindles and the feed Central lubrication points on the front of the machine Electronic digital displays on spindles 3 and 5 (axial), spindle 6 (radial) and spindle 4 (axial and radial) Safety and noise reduction Bdjdpfx Ajxz Hh Uomysf ----- Full safety enclosure Easily hinged safety hood with window. Covers the ent...

Condition: reconditioned (used), Year of construction: 2017, Number of spindles 5 St. Working width 240 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-36 m/min. Weight ca. 3500 kg control SCM Control 10 SCM Superset NT with workpiece return ----- The machine is in cleaning and completely checking process at the moment. Brief Summary: ----- - 5 spindles - Powerful motors - Left and upper spindles controlled for width and height - With workpiece return to the operator 1st spindle ----- First lower horizontal spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm 2nd spindle ----- First right vertical spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm T-set quick-clamping system 3rd spindle ----- First left vertical spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm T-set quick-clamping system Electronic horizontal positioning / motorized width adjustment 4th spindle ----- First upper horizontal spindle Motor with brake 11.0 kW Diameter 40 mm Speed 6,000 rpm T-Set quick-clamping system Bedpfx Aowwl Nljmysdf Electronic radial positioning / motorized height adjustment 5th spindle ----- Second lower horizontal spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm SCM Control 10 Includes workpiece return system Includes existing used planer heads. (Technical specifications according to the manufacturer - without guarantee!)

Condition: reconditioned (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 3 kW Feed speed 5-24 m/min. total power requirement 27 kw Dimensions (L/W/H) 3900 x 2200 x 2000 mm weight of the machine ca. 2500 kg Weinig Profimat 23 four-side planer, window version with glazing bead removal or can be used as a grooving spindle ATS control and program control ----- Machine was factory overhauled by Weinig in 2024. Technical Specifications Summary (Please inquire about any additional accessories included) ----- General ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 > Planer table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically timed up-down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: pneumatically timed up-down glazing bead saw Spindle Description ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glazing bead saw 2.2 kW, 6000 rpm, 40 mm diameter Additional Features ----- > Can be used for glazing bead cutting or as a grooving machine > ATS control, automatic 2-axis positioning for width and height (left and upper spindle) with 99-program memory > Machine operation: Window package Joint control of the right spindle and the glazing bead feed via manual selector switch on the control panel > Spindles with mechanical digital display Bdodpfoxpn T Usx Amyef (Technical data according to the manufacturer - no guarantee!)

Condition: excellent (used), Year of construction: 2002, Technical specifications: Retrofit in 2026 Working length: 4100 mm Distance between uprights: 3700 mm Press force: 220 tons CNC control: CD2000 (new) Color screen size: 14" Controlled axes: Y1/Y2; X; R Motorized adjustable back gauge Overhang: 300 mm Stroke: 200 mm Bsdpfoznl U Tsx Amysdf Automatic crowning Motor power: 20 kW Dimensions (length x width x height): approx. 4800 x 2300 x 2900 mm Weight: approx. 17.5 tons Accessories: Segmented AMADA tools, new Lateral safety devices Condition: The machine is in very good overall condition Only approx. 7,500 operating hours The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: used, 4 pieces of pallet roller rails from Torwegge, new, for sale due to an incorrect purchase. NR200 #0040329 Profile: 65/130/65 x 3 mm Pitch: 66 mm Overall height: 80 mm Load capacity/roller: 160 kg (NR200/60/10) Bdsdex Hwrwspfx Amyof Profile made of galvanized steel sheet U-65/130/65 x 3 Length: 2000 mm Location: Rieth

Condition: new, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: automatic, color: white, brakes: retarder, number of seats: 20, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Sprinter 519 base vehicle available. Quick delivery of complete vehicle. Additional base vehicles available; conversion can start immediately. Images show twin vehicles with optional extras. Base vehicle: - Cruise control - Collision Prevention Assist - Lane Keeping Assist - Active Brake Assist - Front air conditioning system TEMPMATIC - Hot water auxiliary heating with timer - Multifunction steering wheel, adjustable in height and inclination - LED headlights - Fog lights - Driver's comfort seat with seat heating - Cruise control - Storage compartment above the dashboard - MBUX multimedia system with 10-inch touchscreen, reversing camera, and parking package - 9-speed automatic transmission - Length 7336 mm With new GSR 2 system e.g.: - Driver comfort package - Reversing camera - Blind Spot Assist - Turning Assist - MBUX 10-inch (radio with Bluetooth, CarPlay, touchscreen) - Tire pressure sensors - Attention Assist - Active Lane Keeping Assist - Start-up information assist - Intelligent Speed Assist - Distance Assist Bdsdpfxszmrcbo Amyof - Rain sensor - Electric exterior mirrors - Cruise control Vehicle conversion: Can be freely configured according to your wishes: Price including the aforementioned base vehicle with the following equipment: €104,990.00. - Acoustic and thermal insulation from the passenger compartment - Door with recessed entry; original sliding door, optionally with electric drive - Webasto RT 145 0 14.5 kW air conditioning system - USB connections at each row of seats - Multi-level and multi-color interior lighting - Side windows, fake panorama in original cut-out, black tinted (double glazing) - Roof hatch / emergency exit hatch - Floor in wood design (Gerflor) - 19 reclining seats (adjustable rearwards) with armrests on the aisle seats - Travel leader seat - Half podium (no wheel arch in the interior) - Recessed luggage compartment - Ceiling duct left and right with service sets - USB connections at each row of seats Net export possible. Base price from €99,990.00 Custom orders possible, e.g., with electric exterior sliding door. We make shipments worldwide.

Condition: ready for operation (used), Indramat CLM 01.3-X-0-4-B controller, serial number: 24787010914, professionally and completely overhauled and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. Bjdji Ebbxopfx Amyodf