Used Bertuetti Simplex 4 X Roller Dough Moulder for sale (93,593)

Condition: used, maximum load weight: 34,250 kg, overall weight: 39,500 kg, axle configuration: 3 axles, first registration: 10/2022, next inspection (TÜV): 04/2027, Equipment: ABS, Excerpt from Equipment List: 09010.001 Braking system in accordance with ECE-R13 09020.001 Electrical system in accordance with ECE-R48 09050.001 The Kögel superstructure guideline must be observed! It can be accessed at [URL removed]. Chassis 10110.020 Chassis frame made of high-quality steel, but without an outer frame. 10300.010 Coupling plate with a 2-inch fifth-wheel coupling pin according to DIN 74080 / ISO 337 11110.105 With cross member and container locking mechanisms for accommodating: a) 1 x 40' High-Cube container (frame extended) b) 2 x 20' ISO containers (frame extended) c) 1 x 30' ISO container flush at the rear (frame extended) d) 1 x 20' ISO container flush at the rear (frame retracted) e) 1 x 20' ISO container in the middle (frame retracted). 15200.140 4 pairs of heavy-duty lashing rings 27850.030 Rear frame extension, extendable by approx. 1,370 mm, load capacity 5,800 kg, with spiral cable. Length adjustable via 1 pneumatic cylinder, low-maintenance guide on special plastic slides and 2 extension rollers. Automatic pneumatic locking of the extension. Suspension I 17160.013 Axle lift mechanism on axle 1 I 17165.113 Axle lift control fully automatic, load-dependent. Start assist: activation via 3x brake, 30% overload up to a speed of 25 km/h. I 17170.010 Operation on the chassis via switch. Also possible from the cab (switch in the cab required - PIN 12). I 18330.210 Three-axle unit SAF INTRADISC, with disc brakes Ø 430 mm, offset 120. Air suspension with approx. 180 mm suspension travel. Vehicle Tires 20540.170 Tires 6x 385/55 R 22.5, 160J (manufacturer of our choice) 20865.005 6 steel rims 22.5 x 11.75, offset 120 mm. Chassis Components 20110.010 Fifth wheel (manufacturer at Kögel's choice) mechanically with equalizing plate, 24 t lifting capacity. Single-sided operation on the right when driving forward. 21070.169 Splash guard system (spray mist suppression) according to Regulation (EU) No. 109/2011 for three-axle unit with 22.5 tires, consisting of: 3 pairs of semi-circular mudguards with spray flaps. 21300.001 2 chock blocks with holder I 22070.020 Lateral protective device, according to ECE-R73, closed. 27510.050 Underrun protection made of square steel tube according to ECE-R58 with a lamp carrier arranged above, protected. 27511.010 Height of the underrun protection profile min. 120 mm, designed for increased test loads. Brake / Air Suspension System 32110.058 EBS system 2S/2M with stability program (includes ABS/ALB function), EBS connection ISO 7638, (without connecting lines), parking brake as spring brake, external pneumatic connections and external EBS diagnostic connection via ISO 7638 connection. 33420.070 Air suspension system incl. 1 raising and lowering valve, mounted on the left side when driving forward in front of the axle unit. 34320.001 2 non-interchangeable coupling heads in front ISO 1728 34410.010 Air reservoirs for the brake system and air supply made of steel (EN 286-2). Rear Impact Guard 42551.040 Solid steel rear impact guard at the rear end beam. Electrical / Electronics 60500.021 Lamp carrier made of steel, arranged above the underrun protection. 61100.220 KÖGEL LUXIMA Premium Package, consisting of: Rcsdpezkx Hnsfx Amysd - LED license plate lighting, LED position lights and reflectors in front - flashing LED side marker lights - Superseal and bayonet connectors for the lights I 61500.110 2 LED outline lights with arm, mounted on multi-chamber tail light I 61910.120 2 LED multi-chamber lights

Condition: good (used), Thread cutting head with Strehler jaws, thread cutting die, thread cutting machine, pipe thread cutter -Roller's Central ratchet lever -with: Cutting head R1" -Dimensions: 500/85/H80 mm Rcodpfx Amsd Scpgoyed -Weight: 2.6 kg

Condition: good (used), Furniture dolly, furniture dolly with plastic wheels, furniture transport trolley, transport trolley, platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley -MDF blockboard: 19 mm -Swivel casters: 4 -Heavy-duty transport trolley Rodpfx Ajc Uxwvjmyscd -Load capacity: 200 kg -Number: 1430 units available -Price for orders of 10 pieces: 15 EUR net/piece -Price for orders of 50 pieces: 13 EUR net/piece -Price for orders of 100 pieces: 11 EUR net/piece -Price: per piece -Dimensions: 910/425/H145 mm -Weight: 8.4 kg/piece

Condition: used, functionality: fully functional, Great deals, top prices – please inquire. I am offering 4 used, refurbished Flow high-pressure pumps with oil coolers, see below: Pump 1 Flow 7XD -60, 7856 operating hours, 2 intensifiers, both working simultaneously, 4.5 l/min, 45 kW motor, oil-water cooling, Pump 2 Flow 7XD -60, 25179 operating hours, 2 intensifiers, both working simultaneously, 4.5 l/min, 45 kW motor, oil-air cooling, Pump 3 Rcedozivhtspfx Amyjd Flow 20XR, 48000 operating hours, 2 intensifiers, 1 is redundant as a reserve, 3.8 l/min, 37 kW motor, oil-air cooling Pump 4 Flow 20XR, 55000 operating hours, 2 intensifiers, 1 is redundant as a reserve, 3.8 l/min, 37 kW motor, oil-air cooling The pumps are from a single original owner and are in good condition. Pump 1 + Pump 2 are already ready for shipping and have been tested. Pump 3 + Pump 4 are also available at a special price as a unit or for self-installation. Both pressure intensifiers per pump have been completely overhauled. Prices available upon request.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,250 kg, total length: 82,200 mm, total height: 5,000 mm, clearance between the columns: 3,300 mm, shelf height: 5,000 mm, number of shelf rows: 6, clear span: 3,300 mm, frame height: 5,000 mm, frame width: 1,100 mm, load per truss pair (max.): 3,250 kg, shelf length: 82,200 mm, support length: 3,300 mm, 2 single-row pallet racking systems + 2 double-row pallet racking systems (8 x M50113313-4) each 13.7 m long, 5 m high, 1.1 m deep, each with 4 bays, 3.3 m wide, each with 3 beam levels, load capacity 3250 kg. - 30 upright frames (RM5011 - RAL5019) - 80 base plates, shims, and fasteners - 20 spacers/connectors for double rows (ZAbh20) - 120 floor anchors (ZZBA1210) Rsdszhi Scspfx Amyjcd - 144 single beams (T33135 - RAL2008) - 0 impact protection/collision guard (ZRS40901) - 6 load capacity signs (BSMcP) Frames are bolted together, not pre-assembled. Freight/Delivery: - max. 20 working days after payment receipt - delivery free to construction site/assembly location - unloading from the truck is carried out by the buyer using their own lifting equipment - deliveries are made throughout Germany; excluding islands! Deliveries to EU countries are subject to individual agreement.

Condition: excellent (used), functionality: fully functional, REF: MM6320 1 x Bertuetti conical rounder with automatic flour duster for pieces of dough. Conical rounders work by using a rotating cone and fixed rounding channels (or troughs) to shape the dough pieces into a smooth, round ball. This process helps create an optimal shape and structure for the final product. Manufacturer - Bertuetti. Speed - Variable. Previously used for pieces of dough weighing between 80g-800g. Electrical requirements - 3 phase. Rsdpfex I Sp Hjx Amyecd

Condition: good (used), The scope of delivery includes: 56x stacking transport box, used Manufacturer: SSI Schäfer type: 14/6-4 design: recessed grip on both sides color: blue material: polypropylene Outer dimensions LxWxH: 210x150x123mm inner dimensions LxW: 190x123mm Useful height in stack: 110 mm Rodpfx Amspl Tfwoyocd Capacity: 2,50 Liter Stackable: yes Weight | Piece: 0,266 kg Remark: These are used stacking transport boxes. There may be scratches, soiling and color defects may be present. Application: The stacking transport boxes are suitable for storing tools, screw materials and other small parts. small parts. General information about the article: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), Included in delivery are: 10x stacking transport box, used Manufacturer: SSI Schäfer type: 14/6-4 Rsdspl Tdgopfx Amyscd design: recessed grip on both sides color: blue material: polypropylene Outer dimensions LxWxH: 210x150x123mm inner dimensions LxW: 190x123mm Useful height in stack: 110 mm Capacity: 2,50 Liter Stackable: yes Weight | Piece: 0,266 kg Remark: These are used stacking transport boxes. There may be scratches, soiling and color defects may be present. Application: The stacking transport boxes are suitable for storing tools, screw materials and other small parts. small parts. General information about the article: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), Included in delivery are: 28x stacking transport box, used Manufacturer: SSI Schäfer type: 14/6-4 design: recessed grip on both sides color: blue material: polypropylene Outer dimensions LxWxH: 210x150x123mm inner dimensions LxW: 190x123mm Useful height in stack: 110 mm Capacity: 2,50 Liter Stackable: yes Weight | Piece: 0,266 kg Remark: These are used stacking transport boxes. There may be scratches, soiling and color defects may be present. Rcjdpfxopl Tdne Amyod Application: The stacking transport boxes are suitable for storing tools, screw materials and other small parts. small parts. General information about the article: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: new, We offer you a new workbench from the manufacturer Metal Sistem for sale. Delivery time: approx. 3 - 4 weeks Rjdpfx Amshq Txhoyecd Technical data of the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1,200 mm Workbench depth: 900 mm Workbench height: 900 mm The scope of delivery includes: 02x workbench frames, new Material color: fully galvanized Frame type: TS4 including cross and diagonal braces, base plates The frames are pre-assembled (bolted framework) 723 mm high 700 mm deep 04x workbench crossbeams, new Crossbeam type: TS Profile dimensions: 70 x 42 x 3 mm Clear width: 920 mm Material color: fully galvanized 01x worktop, new Wood type: MDF Thickness: 28 mm Dimensions: 900 x 1,200 mm Material color: black 03x steel shelves, new Dimensions: 300 x 700 mm Type: H29/D 02x swivel casters, new 02x brake/swivel casters, new 01x angle set, new for fastening the worktop 08x locking hooks, new Material color: fully galvanized

Condition: good (used), The scope of delivery includes: 01x stacking transport box, used Manufacturer: SSI Schäfer type: 14/6-4 design: recessed grip on both sides color: blue material: polypropylene Outer dimensions LxWxH: 210x150x123mm inner dimensions LxW: 190x123mm Useful height in stack: 110 mm Capacity: 2,50 Liter Stackable: yes Weight | Piece: 0,266 kg Remark: These are used stacking transport boxes. There may be scratches, soiling and color defects may be present. Application: The stacking transport boxes are suitable for storing tools, screw materials and other small parts. small parts. Rcodpfxspiur Ae Amyjd General information about the article: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), The scope of delivery includes: 261x stacking transport box, used Redpfx Aepl Tcbsmyscd Manufacturer: SSI Schäfer type: 14/6-4 design: recessed grip on both sides color: blue material: polypropylene Outer dimensions LxWxH: 210x150x123mm inner dimensions LxW: 190x123mm Useful height in stack: 110 mm Capacity: 2,50 Liter Stackable: yes Weight | Piece: 0,266 kg Weight / pallet: approx. 95,00 kg Remark: These are used stacking transport boxes. There may be scratches, soiling and color color defects may be present. Application: The stacking transport boxes are suitable for storing tools, screw materials and other small parts. small parts. General information about the article: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: new, We offer you a new workbench from the manufacturer Metal Sistem for sale. Delivery time: approx. 3-4 weeks Technical data for the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1,200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in the scope of delivery: 02x Workbench frames, new Material color: fully galvanized Frame type: TS4 including cross and diagonal braces, foot plates The frames are pre-assembled (bolted framework) 888 mm high 700 mm deep 04x Workbench crossbeams, new Rjdpfx Ajhq Twyemyecd Crossbeam type: TS Profile dimensions: 70 x 42 x 3 mm Clear span: 920 mm Material color: fully galvanized 01x Worktop, new Wood type: MDF Thickness: 28 mm Dimensions: 900 x 1,200 mm Material color: black 03x Steel shelves, new Dimensions: 300 x 700 mm Type: H29/D 01x Angle set, new for mounting the worktop 08x Locking hooks, new Material color: fully galvanized

Condition: new, We are offering a new workbench from the manufacturer Metal Sistem for sale. Delivery time: approx. 3-4 weeks Technical data for the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1,200 mm Workbench depth: 900 mm Workbench height: 900 mm The scope of delivery includes: 02x workbench frames, new Material color: fully galvanized Frame type: TS4 including cross and diagonal braces, footplates The frames are pre-assembled (bolted framework) 723 mm high 700 mm deep 02x workbench crossbeams, new Crossbeam type: TS Profile dimensions: 70 x 42 x 3 mm Clear width: 920 mm Material color: fully galvanized 01x worktop, new Wood type: MDF Thickness: 28 mm Dimensions: 900 x 1,200 mm Material color: black 02x swivel casters, new 02x brake/swivel casters, new 01x angle set, new Redpfx Ajhq Txwemyocd for attaching the worktop 04x locking hooks, new Material color: fully galvanized

Condition: good (used), The scope of delivery includes: 1.044x stacking transport box, used Rsdepl Tf Eepfx Amyscd Manufacturer: SSI Schäfer type: 14/6-4 design: recessed grip on both sides color: blue material: polypropylene Outer dimensions LxWxH: 210x150x123mm inner dimensions LxW: 190x123mm Useful height in stack: 110 mm Capacity: 2,50 Liter Stackable: yes Weight | Piece: 0,266 kg Weight / pallet: approx. 95,00 kg Weight / 1,044 pcs.: approx. 380.00 kg Remark: These are used stacking transport boxes. There may be scratches, dirt and color defects. color defects may be present. Application: The stacking transport boxes are suitable for storing tools, screw materials and other small parts. small parts. General information about the article: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: new, We are offering a new workbench from the manufacturer Metal Sistem for sale. Rcjdjhq Tqdspfx Amyod Delivery time: approximately 3-4 weeks Technical specifications of the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1,200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in the scope of delivery: 02x workbench stands, new Material color: fully galvanized Stand type: TS4 including cross and diagonal braces, foot plates The stands are pre-assembled (bolted framework) 888 mm high 700 mm deep 02x workbench crossbeams, new Crossbeam type: TS Profile dimensions: 70 x 42 x 3 mm Clear span: 920 mm Material color: fully galvanized 01x worktop, new Wood type: MDF Thickness: 28 mm Dimensions: 900 x 1,200 mm Material color: black 01x angle set, new for fastening the worktop 04x locking hooks, new Material color: fully galvanized

Condition: good (used), Technical data for the pallet racking upright: Racking system: Dexion Type: S 4 Included in delivery: 01x pallet racking upright, used Material color: Sendzimir galvanized Type: H Profile dimensions: 81.7 x 77.21 x 2.5 mm Including horizontal and diagonal braces, base plates. The uprights are pre-assembled (bolted truss construction) Height: 11,050 mm Rsdpfx Amsxxq Tvjyscd Depth: 1,100 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. Transport or shipping of this item is associated with additional costs, which can be specifically requested from us depending on the delivery location and scope of delivery.

Condition: used, mileage: 36,132 km, power: 397 kW (539.77 HP), first registration: 06/2025, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 04/2026, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, parking heater, Trailer package, exhaust on right side with floor outlet, full brake assist, differential lock, rear window in cab wall, air horns, rotating beacons, refrigerator, maximum container length 6,500 mm, hooklift RS26.65-TSL, automatic telescoping, end position damping, i.s.a.r. control panel. Rjdjycnmpopfx Amyocd

Condition: excellent (used), Year of construction: 2025, Format 4 Kappa 450 x-Motion 2-axis control, height and tilt adjustment Technical data: - Cutting length: 2800 mm - Cutting width: 1300 mm - Cutting height: 155 mm Rcjdpfxsy Rp D To Amyed - Max. saw blade Ø 450 mm - X-motion control - Angle scale with length compensation - Extractable Ø 120 mm - Motor power: 10 kW - Year of construction: 2025 Duplex mitre fence

Condition: used, total length: 1,500 mm, total width: 600 mm, total height: 2,000 mm, TECHNICAL DATA • Manufacturer: Metalsistem • Frame height: 2,000 mm • Shelf width: 1,500 mm • Frame depth: 600 mm • Shelf load capacity: 100 kg Rcjdpfxsy D Tdkj Amyjd • Number of shelves per bay: 4 units • Finish: galvanized • Condition: used Large quantities available immediately. PRICES: • Starter bay: €74.00 net per unit • Add-on bay: €58.00 net per unit Bulk prices net per unit plus VAT: Starter bays: • 1 - 5 bays: €74.00 net per unit • 6 - 20 bays: €70.30 net per unit • 21 - 50 bays: €66.60 net per unit • from 51 bays: €62.69 net per unit Add-on bays: • 1 - 5 bays: €58.00 net per unit • 6 - 20 bays: €55.10 net per unit • 21 - 50 bays: €52.20 net per unit • from 51 bays: €49.30 net per unit YOUR CONTACTS: • Tanja Henkelmann • Rainer Nürenberg • Oliver Kopp TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the items. This article is available for collection. Delivery or shipping is possible at an additional cost. The extra charges depend on the delivery location and the volume of the shipment and can be quoted individually by us on request. TERMS OF PAYMENT Terms of payment are to be agreed upon in case of order. The price is a unit/net price or as specified in the description (plus VAT). Of course, you will receive an invoice stating the VAT separately. ABOUT US DLK, based in Nordhorn, trades in new and used products from the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage as well as machines for trade, industry and crafts. We constantly offer a wide range of attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please feel free to contact us. Four wins – The building blocks of DLK’s success – Storage Technology | Levelmaker® | Logistics | Solutions

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 04/2022, total length: 11,450 mm, total width: 2,550 mm, suspension: air, tire size: 385/55R22,5, wheelbase: 9,160 mm, color: black, Year of construction: 2022, Equipment: ABS, = Additional options and equipment = - EBS = Further information = Rcodpfx Aoyxlzqomyed Axle configuration Tyre size: 385/55R22.5 Axle brand: SAF Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9,000 kg Rear axle 2: Max. axle load: 9,000 kg Rear axle 3: Max. axle load: 9,000 kg Weights Empty weight: 5,230 kg Payload: 35,770 kg Gross vehicle weight: 41,000 kg Functional Extendable body: Yes Identification Registration number: OT-82-GT

Condition: reconditioned (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 3 kW Feed speed 5-30 m/min. control Powercom Weinig Powermat 500 (Window Version for window producers) ----- The machine will be a partial renovated at our warehouse prior to delivery. The interior view photos of a similar machine from our archive serve to illustrate how the machine will be renovated. Technical Summary: ----- - 6 spindles, 5 of which are PowerLock - 8,000 rpm - Large PowerCom control system - Spindles 2, 3, and 4: CNC-controlled axial adjustment - Spindles 2, 3, 4, and 5: CNC-controlled radial adjustment - Window package for glazing bead separation: pneumatic cycling for right and top spindles for bead separation Detailed Description: ----- Tool arrangement no. 018 for window production Technical Data: ----- Working width: 20 – 230 mm (with tool cutting circle 93 – 125 mm) Working height: 8 – 120 mm (with tool cutting circle 93 – 125 mm) 1. Tool Spindle ----- First bottom spindle Diameter: 40 mm Motor with brake: 7.5 kW Speed: 8,000 rpm Tool cutting circle: 125 – 180 mm Tool cutting circle (rebate cutter): 130 – 160 mm Axial adjustment range: 17 mm Rebating device MarathonCoating for table insert before 1st bottom spindle 2. Tool Spindle POWERLOCK/HSK ----- First right spindle Motor with brake: 7.5 kW Speed: 8,000 rpm Includes high-performance ball bearings Tool cutting circle: 93 – 200 mm Maximum profiling depth: 35 mm Axial adjustment range (PowerLock): 55 mm Radial adjustment range: Min. tool diameter at fence level: 93 mm Max. tool cutting circle behind fence line 200 mm Right tool spindle: axial positioning (55 mm) pneumatically controlled via selector switch, max. saw blade diameter 180 mm CNC-controlled axial adjustment CNC-controlled radial adjustment 3rd tool spindle POWERLOCK/HSK ----- First left tool spindle Motor with brake 7.5 kW Speed ??8,000 rpm Includes high-performance ball bearings Tool cutting circle 93 – 200 mm Maximum profiling depth 35 mm Axial adjustment range for PowerLock 55 mm CNC-controlled axial adjustment CNC-controlled radial adjustment Rcedozp Rxyepfx Amyjd Pressure shoe in front of left tool spindle, incl. 2 spring-loaded lateral pressure rollers 4th tool spindle POWERLOCK/HSK ----- First top tool spindle Motor with brake 7.5 kW Speed ??8,000 rpm Includes high-performance ball bearings Tool cutting circle 93 – 200 mm Tool cutting circle for straight-knife cutterheads max. 163 mm Maximum profiling depth 35 mm Axial adjustment range 40 mm CNC-controlled axial adjustment CNC-controlled radial adjustment Top tool spindle: axial positioning (40 mm) pneumatically controlled via selector switch, max. saw blade diameter 180 mm 5th tool spindle POWERLOCK/HSK ----- Second top tool spindle Motor with brake 7.5 kW Speed ??8,000 rpm Includes high-performance ball bearings Tool cutting circle 93 – 200 mm Tool cut...

Condition: new, sheet width 1550 mm plate thickness 6.5 mm pre-bending 4.5 mm diameter of upper rolls 150 mm side roll diameter 130 mm diameter of lower rolls 150 mm distance max. OW zu UW 20,0 mm total power requirement 2.2 + 1.5 kW weight of the machine ca. 2370 kg. range L-W-H 3300 x 1150 x 1110 mm Exhibition machine - NEW not yet in use (!!) Special price on request Equipment: - electro-hydraulic 4-roller round bending machine Redpfx Ajxabkbjmyocd * with driven top roller + bottom roller * stable welded construction - Area of application: * light to heavy sheet metal processing (steel/aluminum/stainless steel) - electro-hydraulic adjustment of the bottom + side rollers - linear guidance of the side rollers - top roller driven by robust electric motor + planetary gear - freely movable, separate control panel - hardened rollers SAE 1050 (CK 45) + crowning - conical bending device - 3x axis digital display for precise roller positions - electro-hydraulic folding bearing - operating instructions (PDF)

Condition: used, mileage: 412,600 km, power: 355 kW (482.67 HP), first registration: 05/2019, fuel type: diesel, empty load weight: 16,326 kg, maximum load weight: 9,674 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 5,300 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space volume: 45 m³, loading space length: 7,200 mm, loading space width: 2,500 mm, loading space height: 2,550 mm, Equipment: ABS, air conditioning, crane, cruise control, differential lock, low noise, onboard computer, parking heater, soot filter, DAF XF480 6X2*4 Flatbed/Tarpaulin with Crane First registration: 04/2019 412,600 KM with documentation Euro 6 emission standard Long-distance driver's cab with 2 beds Automatic transmission Air conditioning, auxiliary heating Adaptive cruise control Lane departure warning system Leaf/air suspension 3rd axle is a steering axle 6x2 axle configuration Wheelbase: 5,300 mm Tyres: 315/80R22.5 Flatbed/tarpaulin body dimensions (L x W x H): 7,200 mm x 2,500 mm x 2,550 mm Tail lift: D'Hollandia 2,000 kg Unladen weight: 16,326 kg Crane: Hiab X-HiDuo 188 B-2 Year of manufacture: 2019 Only 296 crane operating hours! Radio remote control 5th and 6th hydraulic functions for additional attachments 2 hydraulic extensions 3.20 m / 5,400 kg 4.60 m / 3,750 kg 6.40 m / 2,650 kg 8.40 m / 2,020 kg 10.40 m / 1,540 kg (mechanical extension retrofittable by manufacturer) Hook height: approx. 12 meters The vehicle is from first ownership and is in very well-maintained condition. Export/net price: €59,900 Rjdpoxwzrgsfx Amyjcd All information without guarantee, errors excepted.

Condition: used, mileage: 412,600 km, power: 355 kW (482.67 HP), first registration: 05/2019, fuel type: diesel, empty load weight: 16,326 kg, maximum load weight: 9,674 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 5,300 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space volume: 45 m³, loading space length: 7,200 mm, loading space width: 2,500 mm, loading space height: 2,550 mm, Equipment: ABS, air conditioning, crane, cruise control, differential lock, low noise, onboard computer, parking heater, soot filter, DAF XF480 6X2*4 Flatbed/Tarpaulin Truck with Crane First registration: 04/2019 412,600 KM with documentation Euro 6 emissions standard Long-distance driver cab with 2 beds Automatic transmission Air conditioning, auxiliary heating Adaptive cruise control Lane departure warning system Leaf/air suspension 3rd axle is a steering axle 6X2 axle configuration Wheelbase: 5300mm Tyres: 315/80R22.5 Rodpoxwzrajfx Amyocd Flatbed/tarpaulin body: Length: 7200mm x Width: 2500mm x Height: 2550mm Tail lift D'Hollandia 2,000kg Unladen weight: 16,326kg Crane: Hiab X-HiDuo 188 B-2 Year of manufacture: 2019 Only 296 crane operating hours! Radio remote control 5th and 6th hydraulic circuits for additional attachments 2 hydraulic extensions 3.20m / 5400kg 4.60m / 3750kg 6.40m / 2650kg 8.40m / 2020kg 10.40m / 1540kg (mechanical extension retrofittable by manufacturer) Hook height approx. 12 meters The vehicle is from first ownership and is in very well-maintained condition. Export / net price: 59,900 Euro All information without guarantee, errors excepted.