Used Az System 2000 for sale (45,692)

Condition: good (used), Year of construction: 2004, AUTOMATIC CAB SPRAY CEFLA EASY 2000 D Producer: CEFLA Type: EASY 2000 Year of production: 2004 Product number: 04177/1 Electronic painting system SPRAY CABIN ECOSPRAYER EASY 2000. The gun guide system consists of two carriages (holding 4, 6 or 8 guns each). Electronic regulation of speed and accelerations / decelerations allows for precise painting of objects. The "BACK SPRAY" varnishing system allows for precise and even distribution of the varnish between the edge and the surface. The transport system with a constantly rotating belt allows the recovery of the product splashed (varnish / paint) from the belt. Working pressure of the feed pump - 6 bar Spraying air working pressure with guns -1 ÷ 4 bar Working air pressure for opening the guns - 5 ÷ 6bar "BRUSHLESS" engine power - 2 kW Gun speed -120m / min Details travel speed - 2-10.6 m / min TRANSPORTER TRC2500 Producer: CEFLA Type: TRC2500 / 2V / 125 Year of production: 2005 Product number: 05026/14 Transporter, 2500 mm long and 1250 mm working width, with two speed ranges: low from 1.7–11.3 m / min (corresponding to the spraying speed of the spray cabin) and high 21.2-59 m / min. Main engine power 1.72 kW. OVEN UNISON 12 M Producer: UNISON Type: UNI-LEVEL 6/12 Year of production: 2010 Length 13500 mm Width 2600 mm Height 2510 mm Weight 6950 kg Power supply 3 x 400 VAC, Hz Air pressure 0.6 Mpa Ksdpfszumxmsx Ah Eodt The shelf dryer is used for hot air drying of painted elements in the automatic varnish machine that applies paint coatings using the spray method. The drying room has 6 shelves - each 12.2 meters long. The rated speed of the main conveyor is 4 m / min. TRANSPORTER MCRS PRN 6,3 with belt transformer (II) Producer: MCRS Type: PRN-6.3 Year of production: 2018 Product number: 18014/5

Year of construction: 1998, condition: used, functionality: fully functional, Grinding master 2000 This is A polishing machine with a 900mm wide table. It has the capability of polishing stainless steel from a hot rolled finish up to a highly polished finish. A wide range of polishing belts are available for this machine, ranging from 60 grit to 400 grit and for a wide range of materials. It comes complete with an air filtration system, that extracts the polishing dust and particles through a water trough. that captures the dust and particles. The clean filtered air is exhausted back into the building. This means that the Grindingmaster can be located in any position in a building without the need for outside venting. This system also comes with a customised racking system for the safe storage and easy access to the polishing belts. Kdjdpfozlubdjx Ah Ejt It also comes complete with a Surface Measuring Device, which can accurately measure and verify the desired surface finish.

Year of construction: 2000, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 200401, System Ceramics – Automatic Tile Palletizing Machine (Refurbished) Manufacturer: System Ceramics S.p.A. Machine type: Automatic palletizing machine for ceramic tile packages Condition: Used – fully refurbished Status: In good working condition Automatic system designed for palletizing ceramic tiles, suitable for integration into ceramic production lines. Technical information: * Brand: System Ceramics * Category: Ceramic tile sorting / packaging equipment * Condition: Refurbished and tested * Functionality: Fully operational * Technical documentation * Availability: Immediate The machine has been professionally refurbished and maintained, ensuring reliability and reduced downtime. Optional services: * Machine inspection * Dismantling and loading * Worldwide shipping available Price: On request Location: Italy Kjdpfxezzz Eus Ah Eodt Contact us for further details, photos, videos and technical specifications.

Year of construction: 2012, operating hours: 3,500 h, condition: used, functionality: fully functional, P System fully automated hydraulic pelleting line with patented hydraulic pelleting system. Mono roller, hydraulically operated with a unique load sensing system. Features automatic vegetable oil injection at startup and shutdown. Continuous rated production 350kg/hr (peak 500kg/hr) - Fully automatic, operates without human intervention. In its current setting it worked 12hrs continuously alongside log production, but can operate continuously if required. Line includes the following:- 50m³ moving floor container with hydraulic operated lid. Material level viewing windows, and unloading cross auger. Incline discharge auger with magnetic separator. First stage hammer mill for material up to P16 (G30). Pneumatically conveyed to minisolo. Mini silo distribution hub with hydraulic agitator. Equipped with cyclone and transfer fan. The unit has an additional port covered with a blanking plate to allow addition of another pelleting module. Second stage hammer mill and rotary valve controlled by pelleting module. P300 - 30kW pelleting module with PCL control system. All motors other than the main drive are hydraulic and controlled by the pelleting module. The system has a moisture sensor which injects water into the second stage hammer mill to control pellet quality. Die temperature is monitored by a temperature probe and controlled by compressed air injection. Automatic oiling system on startup and shutdown. 6m Discharge cooling and screening auger. Pellets are conveyed, cooled and screened for dust by hydraulically driven auger. Double filter air extraction unit. The line is in good condition and comes with a set of spare parts, dies and rollers. PCL control unit and main drive gearbox were replaced over a year ago. It has been serviced well and can be demonstrated working if required, with your material. Not included in offer, but available by request 4000L pellet hopper made from galvanised steel metal, with pneumatically operated hopper. Kdjdpfxszcf Dls Ah Est Semi-automatic bagging plant, 5kg - 30kg capacity. Plastic sack heat sealer. Pellet quality test equipment. 5m Bucket elevator made by Perrys of Oakley.

Condition: good (used), Year of construction: 1990, machine/vehicle number: 13616, Offer 26182 Technical data: - Drilling capacity in steel ST 60 approx. 75 mm - Drilling capacity for enlarging holes approx. 90 mm - Thread cutting up to approx. M 60 - Drill spindle mount MK 5 - Drill spindle stroke 380 mm - Overhang min. / max. approx. 420 / 2000 mm - Column diameter approx. 500 mm - Stroke of the arm approx. 1380 mm - Min. / max. distance: - Spindle - base plate approx. 370 - 1750 mm - Base plate clamping surface approx. 1100 - 2300 mm - 12 spindle speeds 19 - 1900 rpm - 9 feed rates 0.09 - 0.75 m/rev - Drill spindle drive 400 V / 10 kW - E - Central clamping system - Coolant system - T-slot table - Various chucks + drills Ksdpfxsztp Die Ah Eedt - Space requirement approx. W 1400 x H 3400 x D 3600 mm - Weight approx. 8000 kg

Condition: excellent (used), EyeSys System 2000 Corneal Analysis System The EyeSys 2000 Corneal Analysis System is designed to deliver unsurpassed performance, accuracy, ease of use, and affordability with these key features: Optimal central and peripheral corneal coverage provides complete information for the entire cornea. Automatic calibration and automatic data correction ensure greater accuracy of topographical data. Automatic focusing and simple exam paths improve usability, accelerate the exam process, and virtually eliminate any focus discrepancies between operators. Advanced software applications include primary care, co-management, corneal surgery, and contact lens fitting. The unique and patented three-camera technology provides a side-view image of your patient's cornea and enables the use of true aspheric image processing algorithms. Koded Srnpopfx Ah Ejdt Simultaneous patient and operator positioning allows for closer interaction with the patient during the exam. Easy to use Autofocus and correction Automatic save and print functions Interactive help system Intuitive exam path Versatile and flexible Comprehensive diagnostic and surgical displays Personalized exam protocols Customizable displays and reports Multi-card comparison tools Accurate and reproducible Focus verification Artifact detection and correction Calibration verification Scope of delivery: 1 x EyeSys System 2000 1 x Intel PC with EyeSys software, monitor, keyboard, cable set Dimensions: 80 x 65 x 75 cm Weight: 55 kg Find more items - new and used - in our shop! International shipping costs on request!

Year of construction: 2016, condition: good (used), functionality: fully functional, Storage System Machine Designation Vacuum Stacking Device Machine Number: 150.138 Type: VS 16 Length of Carrier Track (Travel Path): 28.5 m Bridge Span (Travel Path): 16 m Overall Height: 3600 mm Clearance Height: 2700 mm Maximum Stacking Height (incl. supports): 2000 mm Kodpjxdtv Refx Ah Eedt Stack Gap: 100 mm Positioning Accuracy: ±5 mm Support Height: 60 mm Input Stack Height: 1900 mm Length Adjustment Vacuum Load Handling Length: 2000 – 4200 mm Vacuum Suction Capacity: 2 x 40 m³/h Table: Panel Sizes for laminated chipboard, laminated MDF boards, laminated HDF boards, solid wood and composite panels, blockboards, honeycomb panels Length: 1250 - 4100 mm Width: 330 - 2100 mm Thickness: 4 - 100 mm

Condition: used, Year of construction: 2010, HAKO Citymaster 2000 with engine damage + with 2 sweeping systems Unladen weight: 2900 kg Kdjdpfx Ahozwynao Eot Engine power: 75 kW Water tank: 330 l We would be happy to assist you with financing/leasing options through our partners. All information is provided without guarantee. Errors and prior sales excepted.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, laser source model: HF, laser power: 80 W, table length: 1,000 mm, table width: 600 mm, workpiece height (max.): 230 mm, resolution (max.): 1,000 dpi, No minimum price – guaranteed sale to the highest bidder! Kdodezx Dz Hopfx Ah Est Suitable for professional engraving and cutting of various materials such as wood, acrylic, glass, plastic, and metal! TECHNICAL DETAILS Laser power: 80 W Laser source: Synrad HF-CO₂ laser source Table size/working area: 1,000 x 600 mm Maximum workpiece height: 230 mm Maximum resolution: 1,000 dpi Maximum cutting speed: 3,200 mm/s MACHINE DETAILS Power supply: 230 V Dimensions & Weight Machine dimensions (L x W x H): 1,480 x 900 x 1,120 mm Machine weight: 300 kg EQUIPMENT Microsonic autofocus sensor for automatic distance detection and precise focusing LED interior lighting Rotary engraving device for cylindrical workpieces External extraction system Durable Synrad CO₂ laser source

Condition: new, table length 2000 mm table width 1200 mm table height 200 mm bore 28 mm weight 843 kg Specifications - High-quality S355J2+N steel + plasma nitriding - Material thickness approx. 24.5–27 mm - Hole diameter 28 mm - Holes in 100×100 mm grid pattern - Rounded corners, edges and holes - Side panel height 200 mm - Hole spacing on side panel: 50 mm - Includes scale markings on the surface - Construction reinforced with ribs Kodpeznngrefx Ah Eodt - Grid lines enable precise set-ups - Special equipment for welding tables is available on request.

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, machine/vehicle number: 80753, total height: 2,300 mm, total width: 1,750 mm, total length: 2,500 mm, overall weight: 4,700 kg, Equipment: documentation/manual, Offered for sale is a universal tool milling machine, MAHO Type MH 800 P, with digital display and linear control system HEIDENHAIN TNC 121. Year of manufacture: 1980 Travel distances X: 700 mm, Y: 450 mm, Z: 500 mm Table size: 1050 x 627 mm Spindle taper: ISO 40 Spindle speed: 40-2000 rpm, 18 steps Feed rate X, Z-axis: 10-500 mm/min, infinitely variable Feed rate Y-axis: 5-250 mm/min, infinitely variable Rapid traverse X, Z-axis: 1.4 m/min Rapid traverse Y-axis: 0.7 m/min Arbor displacement, vertical: 100 mm Arbor feed, vertical: 0.02 / 0.03 / 0.05 / 0.08 / 0.12 / 0.2 mm/rev Ksdpfx Ahoztkbco Eedt Arbor displacement, horizontal: 100 mm Spindle drive: 5.5 kW Power connection: 380 volts, 50 Hz, 10 kW - Swiveling control panel - Central lubrication - Operating manual Machine dimensions L x W x H: 2.5 x 1.75 x 2.3 m Weight: approx. 4,700 kg

Condition: like new (used), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, machine/vehicle number: ABT 1/2000-8, type of input current: AC, overall weight: 4,200 kg, input voltage: 400 V, input frequency: 50 Hz, The 2 tons/hour Belt Dryer System (model ABT 1/2000-8) is an industrial drying unit manufactured by ASOS PROSES MAKİNA SAN. VE TİC. A.Ş. (Turkey). It is designed for the continuous drying of granular or particulate materials such as pet food, cereals, grains, feed, agricultural products, and similar bulk goods. The system operates indoors on a single production line, 24 hours per day, under ambient temperatures of 5–35 °C and relative humidity between 60–80 %, at sea level. Kdjdpfx Ahoyb Rpde Est The machine is engineered to reduce moisture content from 28 % to 12 %, with a feed rate of 2,000 kg/h, evaporating 364 kg of water per hour, and delivering a dry output of 1,636 kg/h. It requires 364,000 kcal/h of thermal energy, typically provided by combustible gas, with a drying temperature range of 50–60 °C. Total electrical consumption is 37 kW, with 46.2 kW installed power, powered at 400 V / 3-phase / 50 Hz, and an estimated nominal current of ≈ 78.5 A. Noise levels are below 85 dB(A) at 1 m. The required installation space is 4 m (width) × 10 m (length) × 4 m (height). The Belt Dryer unit has a drying surface of 16 m², a belt width of 2,000 mm, and a length of 8,000 mm. It uses a single-pass polyester belt. Both upper and lower casings are made of galvanized steel with rock wool insulation on heated surfaces. Inspection hatches and instrument sockets are provided on both sides for easy access and monitoring. The system includes a spreader unit for uniform material distribution, a burner chamber (400,000 kcal/h, carbon steel), and a set of circulation and exhaust fans (galvanized steel, direct drive, VSD). Multiple motors (totaling 46.2 kW) drive feeding, mixing, drying, ventilation, and heat exchange equipment. Control is managed through a floor-standing MCC and PLC cabinet (IP55, 600×4000×2200 mm), equipped with a Siemens S7-1500 PLC, 17" SCADA touchscreen (TP1900), Profinet communication, and ABB/Danfoss VSDs. All signal and power cables and galvanized trays are included, along with galvanized structural supports. The system is suitable for industrial-scale drying operations in the food, feed, agricultural, and processing industries, offering stable performance, low noise, and automated control. It is built for durability with galvanized steel construction, easy maintenance access, and optional on-site erection and commissioning by ASOS engineers. Delivery time is typically 10–12 months from advance payment, and the equipment is guaranteed for one year against material and manufacturing defects.

Condition: used, Year of construction: 2019, US-2000 AST-MDM Arch size 700x750 mm Band width 30 mm The US-2000 AST-MDM enables high cycle performance. With its dynamic high-speed band insertion and retraction by means of a brushless motor, the machine achieves up to 30 bandings/minute. Thanks to package height detection, product memory, and band centering, the band is applied to the product with precision and very gently. Shipping cartons can therefore be tightly banded without damaging the edges. The AST unit operates wear-free. Kdedpfx Aswrp Hksh Eot

Condition: like new (used), functionality: fully functional, Optical Sorter / Color Detector PROTEC BICS 2000 40C – Stainless Steel The PROTEC BICS 2000 40C optical color sorter is designed for the inspection, sorting, and automatic rejection of products based on color differences within food processing lines. The equipment allows for the analysis of the product as it passes through the inspection zone, detecting units, particles, or materials that do not meet the established color parameters. Non-conforming products can be automatically separated from the main flow, improving the uniformity and quality of the final product. Its configuration with a feeding system, optical inspection zone, and automatic rejection mechanism enables continuous operation on industrial sorting lines. MAIN FEATURES - Manufacturer: PROTEC - Model: BICS 2000 40C - Type: Optical sorter / color detector - Application: Automatic sorting and classification Kjdpfsynkdnex Ah Eodt - Product inspection using optical technology - Detection of color differences - Automatic separation of non-conforming products - Continuous industrial processing - Product feeding and distribution system - Optical inspection zone - Automatic ejection / rejection system - Construction primarily in stainless steel - Integrated control panel - Configurable selection parameters - Hygienic design for the food industry - Integrable into automatic processing lines PROCESS The PROTEC BICS 2000 40C is designed to automatically inspect the product as it passes through the equipment. The product is distributed in a controlled manner before passing through the optical inspection zone, where the system analyzes its color characteristics and compares them with the previously established parameters. When out-of-specification product is detected, the rejection system automatically separates it, allowing the accepted product to continue to the next stage of the process. This system can be used for: - Color sorting - Removal of defective product - Separation of units outside specifications - Improvement of product uniformity - In-line quality control - Automatic classification APPLICATIONS Particularly suitable for processors of fruits and vegetables, legumes, nuts, frozen products, and other food industries that need to automate visual product selection. Depending on the installed configuration, it can be used for different solid and particulate products where color is a relevant parameter for determining their quality or classification. The combination of PROTEC technology, optical sorting, and automatic rejection provides an efficient solution for improving quality control in food processing industrial lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, total height: 4,700 mm, ram adjustment: 100 mm, installation height: 550 mm, table height: 1,200 mm, total width: 1,700 mm, total length: 2,700 mm, table length: 2,100 mm, table width: 1,000 mm, pressing force: 200 t, control cabinet height: 2,245 mm, control cabinet width: 2,400 mm, input voltage: 400 V, distance between side stands: 520 mm, distance between stands: 2,100 mm, overall weight: 48,000 kg, year of last overhaul: 2025, input frequency: 50 Hz, ZEULENRODA Punching and Forming Machine - Cast Iron Version - HR 200-2000 NL The punching machine is sustainably manufactured as a new machine, using carefully inspected, reusable cast iron components (table, headstock, and side supports). Press ram newly manufactured in a vibration-damping cast iron design. Drive system with a compact drive unit and a 2-connecting rod power transmission. Kedozu Avbopfx Ah Esdt • Total pressing force 200 t • Stroke rate 30...120 min-¹ • Working capacity 29 kNm • Ram adjustment 100 ±0.01 mm • Ram stroke, adjustable 30 - 150 mm • Press force monitoring • Hydraulic overload protection • Main control panel + Two-hand control panel • Hardware and software interface for strip lubrication / roller feed / strip coiler • Control system SIEMENS S7-1500 • Remote maintenance

Condition: excellent (used), Year of construction: 2003, Arburg 570C 2000-350/150 / Production line with the Arburg Multilift side robot / 2K machine Year of manufacture: 2003 Injection unit: Screw diameter: 40 mm Shot weight: 153 g Injection pressure: 2120 bar Kjdpfx Ahezy I Rho Eodt Dosing volume: 182 ccm Clamping unit: Clamping force: 200 t Tie bar spacing: 570x570 mm Platen size: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Production line with the Arburg Multilift side robot 2K machine Air valve x 1 Hydraulic core pull x 5 Control system with hot runner Reinforced injection units – bimetal Proportional valves on injection units – precise injection The vertical injection unit - screw diameter: ⌀25 mm - 49 g/shot A rotary table can be purchased for an additional charge. Dimensions: Weight: 7300 kg All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request.

Condition: repair required (used), Year of construction: 2018, machine/vehicle number: 1713613, temperature: 650 °C, overall weight: 1,900 kg, EXW – Dismantling and loading must be arranged by the buyer! Kdsdpozx S Emefx Ah Est MACHINE DETAILS Voltage supply: 3/N/PE 400/230 V AC, 50 Hz Rated current: 125 A Rated heating current: 104 A Heating power: max. 72 kW Motor power: 3 kW Total power: 75 kW Dimensions & Weight External dimensions [mm]: 2,200 × 3,300 × 1,800 / 3,150 with lifting unit External dimensions with lifting unit: 3,150 mm Internal dimensions: 2,000 × 1,000 × 1,000 mm Weight: 1,900 kg Maximum temperature: 650 °C Protection class: IP40 EQUIPMENT Operating manual CE/conformity documents Note: One burner row is defective. Electrical repair is required.

Condition: used, Year of construction: 2007, functionality: fully functional, load capacity: 210 kg, arm reach: 2,900 mm, controller manufacturer: KUKA, controller model: KRC2 ED05, This system is equipped with a KUKA KRC2 ed05 control unit and features the KR 210-2 2000 robot model. The robot offers a payload capacity of 210 kg and a reach of 2700 mm. It is suitable for high-precision applications. Main application areas: Spot and arc welding Heavy-duty material handling Palletizing CNC machine tending Press automation Kdodpsw H Nuqofx Ah Ejt The robot is designed for reliable operation in demanding industrial environments. Model: KR 210 KRC2 ED05 Payload: 210kg Arm Reach: 2700 mm or 3100 mm Condition: Used and tested Year: 2005 (Multiple Options Available) Controller Cabinet: KRC2 ED05 Included: Manipulator + KRC2 ed05 Control Cabinet + All Wire Sets + Teach Pendant As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and designs for your specific production needs. ( Source : Kuka's Website )

Condition: refurbished (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 150 583, total height: 3,975 mm, ram adjustment: 125 mm, installation height: 410 mm, table height: 1,220 mm, total width: 2,725 mm, total length: 3,510 mm, table length: 1,500 mm, table width: 1,200 mm, pressing force: 200 t, control cabinet height: 2,200 mm, control cabinet length: 340 mm, control cabinet width: 600 mm, type of input current: three-phase, clearance between the columns: 900 mm, distance between side stands: 900 mm, distance between stands: 1,520 mm, overall weight: 3,700 kg, year of last overhaul: 2025, ATTENTION: The machine sustained transport damage. The machine is currently disassembled. Components can be inspected. The machine will be completely mechanically and electrically overhauled/repaired before delivery in 2026/2027. Pressing force: 2000 kN Adjustable stroke: 20 - 160 mm Ram adjustment: 125 mm Stroke rate: 30 - 180/min Center height: 410 mm Table dimensions: 1500 x 1200 mm Kdodpfx Ahsw H Arvo Eet (The press will be delivered with a new table top; T-slot design can be freely selected) Ram size: 1500 x 1000 mm Control system: SIEMENS S7 1500 series, PC 477E, year of manufacture 2020.

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 68370, SMB Technik Multima 9R/9L/3K automatic beer bottling monobloc for rinsing, counter-pressure filling and crown capping of glass bottles. The machine was previously in operation at a Norwegian brewery. Following the sale and removal of the labelling machine, an electric motor is required to drive the bottling line. The electric motor is not included in the sale. The SMB rinsing, filling and capping monobloc was operational prior to this change and can be inspected at its current location in Norway. CONFIGURATION * 9-station bottle rinser * 9-head counter-pressure filler * 3-head crown capper * Automatic bottle transfer through rinsing, filling and capping sections * Conveyor sections * CO₂ counter-pressure / isobaric filling * Long-tube bottom-up filling Kdjdpfoz Dhrqox Ah Est * Separate bottle pressurising and return-gas system * Automatic filler bowl level and pressure control * High-pressure injection / jetter before capping * Electrically interlocked safety doors * Automatic bottle presence monitoring FILLING PROCESS The Multima is designed for bottling beer in glass bottles. Bottles are rinsed before being transferred to the filling section. Before filling, the bottles are pressurised, normally using CO₂. Beer is then filled from the bottom through long filling tubes. The system uses separate channels for bottle pressurising gas and return gas and is designed to minimise turbulence, foaming and oxygen uptake. After filling, the bottles pass a high-pressure injection device (jetter), which produces controlled foaming to help displace air from the bottle neck immediately before crown capping. TECHNICAL DATA Manufacturer: SMB Technik GmbH, Mannheim, Germany Model: Multima 9R/9L/3K Year: 2000 Serial number: 68370 Electrical supply: 400 V / 50 Hz Current: 12 A Container: Glass bottles Product: Beer Closure: Crown caps Filling principle: Counter-pressure / isobaric Rinser: 9 stations Filler: 9 filling valves Capper: 3 heads A 400 V to 230 V converter is included in the sale. DOCUMENTATION Extensive original SMB technical documentation is available, including operating instructions, setup and adjustment procedures, bottle changeover information, cleaning and sanitising procedures, maintenance and troubleshooting information, as well as filling-valve technical documentation. IMPORTANT The labelling machine has been sold separately and is NOT included. An electric motor is required to operate the bottling line and is NOT included. Tanks and other brewery equipment visible in the photographs are not included unless specifically agreed. The machine is located in Norway and can be inspected by appointment. Dismantling, loading and transport can be discussed separately.

Condition: used, Year of construction: 1990, functionality: fully functional, overall weight: 9,700 kg, COGEIM E.O. 2000 VACUUM PADDLE DRYER – PHARMACEUTICAL DESIGN – 2,380 L High-quality horizontal vacuum paddle dryer from COGEIM, Italy, in a pharmaceutical design. The dryer features a horizontal, heated/cooled stainless steel container with a large front-opening lid, as well as a robust paddle agitator with scrapers. The parts in contact with the product are made of stainless steel 1.4435, and the inner surfaces are highly polished. The system is suitable for demanding drying, mixing, and vacuum processes in the pharmaceutical, chemical, and fine chemical industries. TECHNICAL DATA Manufacturer: COGEIM, Italy Type: E.O. 2000 Year of manufacture: 1990 Project/Job No.: C.89/040 Working/Nominal volume: approx. 2,380 liters Total container volume: approx. 3,100 liters Container: Operating pressure: -1 / +6 bar Operating temperature: -20 / +165 °C Product-contact material: Stainless steel 1.4435 Inner surfaces: Highly polished HEATING/COOLING SYSTEM The container can be heated or cooled via an external half-pipe coil. Volume of heating/cooling chamber: approx. 150 liters Operating pressure of heating/cooling chamber: up to +6 bar Material of heating/cooling chamber: Stainless steel 1.4306 Temperature range: -20 / +165 °C AGITATOR Robust horizontal paddle agitator with scrapers Large-area mixing of the product Agitator shaft seal via mechanical seal Laterally arranged gearbox/motor drive EQUIPMENT / SCOPE OF SUPPLY The existing scope of supply includes, among other things: - Filter for solids / dust filter - Feed device - Discharge valve Kdodpjr Nclaofx Ah Eet - Rotary valve - Compensator - Drive and gearbox - Pneumatic fittings and components - Large front-opening lid - Support frame - Existing connection components - Existing technical documentation - Original installation/connection drawing The large front lid provides very good access to the interior and to the agitator for inspection, cleaning, and maintenance. CONDITION Used system in operational condition. The interior and the paddle agitator appear to be in very good condition in the available images. Technical documentation and original drawings are available. Further technical information, detailed photos, and excerpts from documentation can be provided upon request.

Condition: new, Year of construction: 2026, functionality: fully functional, total height: 850 mm, total length: 3,000 mm, total width: 1,500 mm, table height: 850 mm, table width: 1,500 mm, overall weight: 800 kg, height adjustment type: mechanical, Welcome, The welding table manufacturer, ATRIBU, offers a new welding table designed for both professional industrial environments and demanding hobbyist workshops. Short Description: DIMENSIONS: Tabletop: 3000 x 1500 mm with 200 mm high side walls. Both tabletop and side walls are 15.0 mm thick. HOLE SYSTEM: Precision-milled and chamfered holes, System 28 mm, 100 x 100 mm grid, with engraved scale/grid. MATERIAL: Kdsdpjy Atrxefx Ah Est S355 J2+N Steel (high-strength structural steel). REINFORCEMENTS: Internal ribbing (160 x 6 mm plates) spaced every 40 cm for maximum stability. TOLERANCES: Maximum deviation of 0.5 mm per meter length. Maximum angular deviation of 0.5°. LEGS: 80 x 80 x 3 mm profiles, bolted, height-adjustable with swivel feet. Height adjustment range: 85–90 cm. PRICE: The price includes the table with standard metal-profile legs (wheels are not included in the base price). Swivel castors in various load capacities are available as an option for an additional fee. Full VAT invoices are issued. Detailed Description: Our tables are manufactured from high-grade S355 J2+N steel. The use of harder structural steel significantly reduces premature hole wear and ensures maximum structural durability. All holes are precision-milled and chamfered for optimal fit and tooling quality. Side walls are also made of S355 steel and feature a double row of holes. Table flatness remains within a maximum tolerance of 0.5 mm per meter. For tables of this size, we typically achieve a flatness of 0.2 mm per meter, ensuring near-perfect surfaces. The tabletop is protected with a mill scale layer for initial corrosion resistance. Additionally, each table is treated with a professional anti-spatter agent with a corrosion inhibitor prior to shipment. [Our welding tables are not plasma nitrided.] Robust internal ribbing provides necessary rigidity, even when welding heavy or complex assemblies. We also supply a full range of professional tools and accessories. Shipping: Affordable shipping across Europe is available (approx. 50–300 EUR depending on table dimensions). VAT Information: For private customers: Local VAT rates apply. Intra-community supply (B2B): With a valid EU VAT number, purchase at 0% VAT is possible. Custom Orders & Other Systems: Need a different size or thickness? We are happy to design and manufacture a customized solution for your requirements. Available Systems & Specifications: Hole Systems: System 28 / System 16 Tabletop Thicknesses: 8.0 mm / 12.0 mm / 15.0 mm Standard Sizes: 1200 x 800 mm 1200 x 1200 mm 1800 x 800 mm 2000 x 1000 mm 2400 x 1200 mm 3000 x 1500 mm Options: Wheels with 300 kg or 100 kg load capacity, HEX grid (additional holes), 50 x 50 mm grid. Available Accessories: Table extensions, towers, clamps, squares, bolts, accessory organizers, and more. Note: Welding tables are supplied without accessories. Please consult our catalog to select your tooling set. How to Order / Contact Us: Inquiry: Please send us an email with your requirements (size, thickness, etc.). We highly recommend requesting our comprehensive catalog, as selecting the right accessory set is essential for efficient work. Order: Once you’ve finalized your configuration, orders can be placed via email. We look forward to hearing from you! We welcome both long-term cooperation and single orders. Best regards, Team ATRIBU

Condition: ready for operation (used), Year of construction: 2005, operating hours: 10,197 h, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller model: Fanuc 18i-MB, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel in X-axis: 1,300 mm Travel in Y-axis: 710 mm Travel in Z-axis: 710 mm B-axis rotation: 360° Number of axes: 4 Table length: 1,500 mm Table width: 660 mm Tool interface: ISO 40 Max. spindle speed: 10,000 rpm Power: 38.4 kW Tool magazine capacity: 32 MACHINE DETAILS Control system: Fanuc 18i-MB Dimensions & Weight Dimensions (L x W x H): 4,300 x 3,250 x 3,080 mm Shipping weight: 7,000 kg Shipping packages: 4 Ksdpfx Ahjzzbbco Ejdt Operating hours: 10,197 h EQUIPMENT CE marking

Condition: excellent (used), Year of construction: 2022, operating hours: 3,600 h, functionality: fully functional, Description: Like-new welding cell including bolt-setting equipment with only 3600 operating hours, consisting of: Robot Qirox QRC 350, QC2 control system including connection cable, programming handheld device, gas nozzle sensor, arc welding search, point editor, QWP, QTI, Manax, hard drive, center-based circular programming Base stand Kedpfx Aozvm Anjh Ejdt Welding machine Qineo Next 452 Motion, wire feeder, welding torch, torch testing gauge, hose package, mechanical cleaning, 1 light curtain, start pre-selection, safety grid in the insertion area, service door with limit switch protection 1 manipulator QR-WP-TC 2.5 KN for components up to Ø 800 mm, plate distance 2000 mm and a load capacity of 250 kg. 1 extraction hood including hose lines without filter unit 1 Bolte bolt-setting device complete Automatic changeover system between bolt-setting head and welding torch Documentation, manufacturer's declaration Accessories: Functional guarantee. Services available upon request. Delivery date: possible in the short term. Subject to prior sale. The system can be inspected under power near Siegen. Special price if dismantled by the end of September 2026!

Condition: excellent (used), Year of construction: 2020, Keyence KEYENCE XM-2000 with XM-H1000 – 3D Coordinate Measuring System (CMM) Professional handheld measurement system for precise 3D measurements directly in production environments. Item description: For sale is a used KEYENCE XM-2000 coordinate measuring system including the XM-H1000 handheld probe. This innovative system enables precise 3D measurements directly at the workplace – without a dedicated measuring room, complex setup, or special CMM expertise. The device is ideally suited for manufacturing operations, quality assurance, initial sample inspection reports (ISIR/PPAP), in-process controls, as well as for reverse engineering. Technical Data – KEYENCE XM-C1000 / XM-H1000 (XM Series) Measuring System (General) Specification: Measurement range (XYZ): approx. 600 × 300 × 200 mm (depending on setup) Measurement accuracy: ±(8 + L/80) µm (L = measured length in mm) Repeatability: ±3 µm (typical) Resolution: 1 µm Measuring principle: Optical tracking with camera-based detection Calibration: User calibration with calibration sphere possible CAD Comparison: Directly on the device (STEP, IGES, etc.) Export formats: PDF, Excel, CSV, DXF Tolerance analysis: Automatic with color mapping XM-C1000 – Control and Evaluation Unit (Controller) Component: Display: 15” touchscreen Connections: USB, LAN, HDMI, power Storage options: Internal + USB export Software functions: Measurement, CAD comparison, report generation Operation: Touchscreen + pushbutton operation Languages: Multilingual (including German) Kodpfx Aezii Dnjh Esdt XM-H1000 – Handheld Probe Specification: Probe type: Handheld with pressure button Feedback: LED status indicator, vibration signal Probe tip: Interchangeable, various tips available Tracking: Detected via controller’s camera system System Characteristics Specification: Operating temperature: 10 – 35 °C Power supply: 100–240 V AC, 50/60 Hz System dimensions (complete): approx. 800 × 600 × 800 mm (depending on setup) Total system weight: approx. 25–40 kg (depending on configuration) Mounting: On table or optional measuring table Scope of delivery: KEYENCE XM-2000 control and evaluation unit KEYENCE XM-H1000 handheld probe XM-C1000 (Controller) Camera unit / tracking module Connection cables and power supplies Condition: Used, fully functional, in very good condition. Shipping & Delivery: Shipping via freight forwarding Collection by appointment possible. International shipping available on request. If you have any questions, need further information or wish to arrange a viewing appointment, please feel free to contact us. (Subject to changes and errors in the technical data and information!) We are also happy to answer any further questions by phone.