Used Travis M-1500 for sale (71,871)

Year of construction: 2004, condition: used, We offer this used MAPLAN MHF 1500/300E1 Maplan MTF 1500/300, year of manufacture 2004. Machine type: MHF 1500/300E1 Serial number: 20401486 Year of manufacture: 2004 Rated connected power: 78 kW Voltage: 3~ 400 V 50 Hz Condition: ready for operation (used) Operating hours: 67,594h Description: Clamping force: 3000kN Injection volume: 1500ccm Tie bar spacing (transverse): 600mm Tie bar spacing (longitudinal): 600mm Heater plate size (W/D): 550 /630mm Daylight opening (open machine): 500mm Connected power: 78kW Power supply: 3x 400V/50Hz Nodpfeyf E Txjx Ab Asdc Machine dimensions (LxWxH): approx. 4.80 x 1.80 x 2.30 m Machine weight: approx. 7500kg Type of incoming current: standard industrial three-phase electricity supply Equipment: documentation If you have further questions or require more information, please send us a message or call us.

Year of construction: 2003, condition: used, We offer this used MAPLAN MHF 1500/300E Maplan MTF 1500/300 injection moulding machine, year 2003. Machine type: MHF 1500/300E Serial number: 20301386 Year of manufacture: 2003 Output power: 73 kW Voltage: 400 V Frequency: 50 Hz Number of phases: 3 Controller type: B&R - CP152 Panel type: Maplan PC 4000 - DOS Year of manufacture: 2003 Condition: ready for operation (used) Operating hours: 78,154h Nodpeyf E Rwofx Ab Asdc Description: Clamping force: 3000 kN Shot volume: 1500 ccm Tie bar distance, crosswise: 600 mm Tie bar distance, lengthwise: 600 mm Heater plate size (W/L): 550 / 630 mm Daylight between open platens: 640 mm Connected load: 73 kW Power supply: 3x 400V / 50Hz Machine dimensions (LxWxH): approx. 4.80 x 1.80 x 2.30 m Machine weight: approx. 7500 kg Input current type: standard industrial three-phase electrical connection Equipment: documentation If you have any further questions or require more information, please send us a message or call us.

Condition: used, grinding diameter 350 mm grinding length 1500 mm centre height 175 mm Nsdpouxftrofx Ab Aedc grinding wheel diameter 400 mm grinding wheel width 50 mm bore 127 mm MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min 0-40 mm/Ø 0-40 mm/Ø ±6,5 ° longitudinal feed of the table 1530 mm table speeds 0,02-6 m/min 130 kg cross travel max. 270 mm 130 inkl. Spannung kg 80 mm tailstock quill taper MT 3 quill travel 30 mm total power requirement 6,5 kW weight of the machine ca. 3,05 t dimensions of the machine ca. 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern and future-proof control system. Photo of machine already delivered with special options -Operation via the touch panel is extremely simple. -The symbols on the control panel are practically identical to the original original control system, so there is no need for familiarisation. -Diagnostic function with display of PLC messages and digital I/O -Dressing function can be extended or changed at the customer's request. -Orientated spindle stop of the workpiece spindle possible on request. -New maximum infeed of 40 mm can be extended on request. -Digital display in 2 axes. Resolution x-axis 0.5my Options: -Encoder with digital display in the workpiece headstock -Rotary encoder with digital display in the grinding headstock (no height adjustment with spindle possible) with spindle possible) -New stable internal grinding device diameter 80mm or 100mm with height adjustment. -Increase of the centre height to max. 225mm -Speed control for the grinding spindle Included: -Operating tool -Clamping tube for chuck Further accessories on request. The x-axis of the machine has an electronically controlled infeed system with stepper motor drive. Hydraulic longitudinal and rapid traverse table movement. Versatile application in production for external cylindrical and internal internal grinding or for external, face and internal grinding in one clamping clamping of individual parts. Possible options: -Semi-automatic dressing cycles for external and internal grinding -automatic dressing compensation. -Measuring control

Year of construction: 2009, condition: ready for operation (used), A complete Mixaco mixing system including an AZO multi-component weighing system is available. 1) AZO weighing system with an integrated scale on the hopper and an external precision scale. Media: 2, filling level query: available, interface: Mixaco, year of construction: 2009. 2) Mixaco mixing system, temperature control unit: available, mixing sequence: hot/cooling/trough, filling option: Big Bags/octabins. All units of this complete system were regularly maintained. Documentation available. An on-site inspection is possible. Nodpfx Abey Nna De Aodc

Year of construction: 2026, condition: new, High capacity semi-finished coil slitting line available with fast delivery and turnkey configuration. Bosporas Machinery is a manufacturer of coil processing lines, roll forming lines and press feeding systems, delivering high-performance and customized industrial solutions worldwide. FAST DELIVERY ADVANTAGE Semi-finished machine with accelerated delivery possibility Main production stages already completed Delivery within approximately 75 working days Much shorter lead time compared to new production Nsdeyzbzrepfx Ab Ajdc Special opportunity offer This coil slitting line is currently in semi-finished production status, offering an important delivery advantage for companies looking for faster commissioning and reduced lead times. Since critical manufacturing processes and major components are already prepared, the line can be completed and delivered significantly faster compared to a newly manufactured machine. The system is designed for high-capacity production and demanding industrial applications. It ensures stable operation, high slitting precision and reliable performance even under continuous heavy-duty working conditions. TECHNICAL SPECIFICATIONS Material Thickness: 0.3 – 3 mm Coil Width: up to 1500 mm Coil Weight: up to 20 Ton Slitting Speed: up to 40 m/min Slitting Accuracy: ±0.1 mm LINE COMPONENTS Hydraulic decoiler (20 Ton capacity) Hydraulic coil loading car Infeed system with straightener unit Slitting head with precision knife adjustment Scrap winding system Tension unit and separator system Hydraulic recoiler Exit system and automation ENGINEERING FEATURES High precision slitting performance Servo-supported and stable feeding system Robust slitting head with gearbox transmission Adjustable knife system for different slit widths Heavy-duty structure for industrial production Advanced automation system (HMI controlled) OPERATIONAL ADVANTAGES Faster delivery compared to newly manufactured lines Reduced investment waiting time Reliable and stable production Suitable for various materials (steel, aluminum, etc.) Competitive lead time advantage 24/7 after sales support APPLICATION AREAS Steel service centers Coil processing facilities Sheet metal manufacturers Automotive and construction industries

Condition: excellent (used), Year of construction: 2004, Technical data: Maximum turning height: 300 mm Maximum turning diameter over bed: 600 mm Maximum diameter over slide: 500 mm Distance between centers: 1500 mm CNC control: FANUC 21i-TB Revolutions: 16 – 4,000 RPM Spindle motor power: 18.5 / 30 kW 3-jaw chuck: 315 mm Tool changer: 12 stations CE marking Dimensions (length x width x height): approx. 6000 x 2300 x 2100 mm Weight: approx. 7.5 tons Accessories: 12-position tool turret Numerous tools Numerous driven tools Hydraulic chuck with additional jaws Tailstock W+W filter system Chip conveyor Ndjdpfx Abey Ub Ufo Ajc The seller is not liable for typographical or data transmission errors. The machine’s appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 2004, machine/vehicle number: 2177/03/9604014, Press capacity: 160 ton Ram stroke adjustable: 20 - 130 mm Slide adjustment: 100 mm Daylight: 560 mm Table surface area : 1500 x 800 mm Ndedpfx Asuqdzdjb Asc Slide area: 1400 x 800 mm Number of strokes: 20 - 60 s.p.m. Distance between the columns F - B: 520 mm Height over floor approx.: 3550 mm Required power: 48 kW Weight of machine approx.: 26 ton Standard configuration Control system SIEMENS S7 Extended machine accessories Automation PME feeding unit consisting of decoiler and feed / straightening unitDecoilerLoad capacity 2 tStrip width 400 mmMaterial thickness 0.5 - 4.5 mmCoil outer diameter 1800 mmSpreading range 470 - 630 mmHydraulic expansion of the spreadHydraulic pressure armElectronic feed / straightening unitMax. strip width 400 mmMax. material passage 410 mmMaterial thickness 0.5 - 4.5 mmCross-section 1200 mm²Number of straightening rollers 7Straightening roller diameter 80 mmNumber of feed rollers 2Pneumatic lifting of feed rollersFeed speed 50 m/minFeed length 0 - 10 m

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, punching force: 28 t, sheet thickness (max.): 10 mm, sheet thickness steel (max.): 6 mm, punching diameter: 76 mm, overall weight: 16,000 kg, throat depth: 1,500 mm, Equipment: safety light barrier, Boschert Multipunch 1500 8-station tool changer incl. 4-station and 8-station multi-tool base bodies (with current tooling consisting of 18 punching tools) Punching force: 280 kN (28 tons) Travel ranges: x – 30500 mm (repositioning up to 9999 mm) y – 1580 mm Punch arm overhang: 1850 mm Tooling system: Trumpf Gr2 (76mm) as well as Boschert Revotool Labod 32065 graphic control / workshop programmable Max. sheet thickness: 6 mm (clamp opening) Max. installation height: 90 mm, stroke length 30 mm upwards and downwards, steplessly programmable. Table width, left + right: 3250 mm each Table depth: 3250 mm Table height: 900 mm Ndjdpozw Dz Defx Ab Ajc Overall width: 6860 mm Overall depth: 5040 mm Overall height: 2080 mm Drive power: 25 kVA Machine weight: 16,000 kg Hydraulic oil capacity: 160 l Color: Blue RAL5017 / Light gray RAL7035 Machine year of manufacture: 2011 Ball roller table Punching slug extraction Fast hydraulics (400/800 strokes) very well-maintained condition new screen with accessories

Year of construction: 2018, condition: used, Liquid filling line composed of: 1) RUDOLF DECKERT FILLING MACHINE, MODEL DFM412R CHARACTERISTICS - Year of construction: 2009 - Tension: 400 V/3 Ph/N Nedj Ad Nvqepfx Ab Ajdc - Rated frequency: 50 Hz ----- 2) RUDOLF DECKERT CAPPING MACHINE, MODEL AVR400 Intermittently operating monobloc capping machine, with linear design, can be expanded with additional workstations. For the processing of several different closure types. Built in 2010. CHARACTERISTICS - Output up to: 150 BPM - GMP-compliant design - Tension: 400 V/3 Ph/N/PE - Rated frequency: 50 Hz ----- 3) RUDOLF DECKERT BOTTLE DEPOSIT, MODEL PT200 Built in 2008. ----- 4) RUDOLF DECKERT ROTATING TABLE, MODEL DT1500 Rotating table in stainless steel. Built in 2010. CHARACTERISTICS - Dimensions: 1640 x 1640 x 1300 mm - Table diameter: 1500 mm - Product entry/exit width: 880 mm - Weight: 150 kg ----- 5) ETIBE LABELLING MACHINE, MODEL HKM10/RE For the application of adhesive labels to ampoules or other cylindrical containers. Built in 2009. CHARACTERISTICS - Printing device: Metronic M03.1 hot printing device - Control panel: PLC Siemens S7-200 - Output: 18,000 objects/hour (max) - Label height: 80 mm - Object diameter: 13 - 60 mm ----- 6) WIPOTEC CHECKWEIGHER, MODEL HC-A Dynamic checkweigher with V2A/AISI 304 stainless steel frame. Built in 2020. CHARACTERISTICS - Display: 15'' color TFT display, with touchscreen - Temperature range: +5 to +40 °C - Noise level: under 70dB(A) - Max output: 600 pcs/min - Rated frequency: 50/60 Hz - Connect load (power capacity): 0.8 kVA (ca) - Size: 1,591 mm x 440 x 900 mm - Weight: 250 kg

Condition: excellent (used), Year of construction: 2008, DEMAG Injection Moulding Machine System 1500/1500-16000 Ndodpfxsyugale Ab Asc Basic Data Manufacturer: DEMAG Model: System 1500/1500-16000 Year of manufacture: 2008 Clamping Unit Clamping force: 15,000 kN Dimensions of mounting plates (H × V): 2150 × 1880 mm Clearance between tie bars (H × V): 1500 × 1250 mm Minimum mould height: 700 mm Maximum mould height: 1400 mm Maximum opening stroke: 2900 mm Injection Unit Screw diameter: 145 mm Injection volume: 10,981 cm³ Injection weight (PS): 9,880 g Maximum injection pressure: 1454 bar Electrical and Hydraulic Equipment Rated pump motor power: 165 kW Heater power: 97 kW Machine Dimensions and Weight Net machine weight: 74 t Control cabinet weight: 21 t Total weight: approx. 95 t Dimensions (L × W × H): 14.4 × 3.4 × 2.9 m Service History / Repairs 2010 – new screw with RSP and barrel 2015 – new IBED 2015 – new wiring board 2017 – new motor and pump no. 2 2017 – new injection cylinder rod BS with seals 2017 – replacement of oil cooler circulation pump 2017 – replacement of TeachBox (robot) 2018 – replacement of pumps P1 + P3 (at 65,800 h) 2018 – hydraulic oil change Optional ESS (Energy Saving Systems) The machine can be equipped with a modern ESS servo drive system, which significantly improves energy efficiency in hydraulic plastic injection moulding machines. The system controls the operation of the hydraulic pump motor through a frequency inverter, which adjusts the motor speed to the machine’s actual demand during the production cycle. As a result, electricity is consumed only when it is truly needed. Main Benefits - Up to 30% reduction in energy consumption - Servo drive technology for hydraulic pumps - Global quality and proven technology used in the plastics processing industry - Reduced energy loss during machine idle time - Lower heating of the hydraulic system - Extended service life for the motor and hydraulic components - Option for installation in existing hydraulic injection moulding machines The ESS system allows significant reduction of machine operating costs while maintaining full production performance parameters.

Condition: new, Year of construction: 2026, Load capacity 1500 kg Fork lift height 3000 mm Mast type Two-stage Fork length 1150 mm Fork width 550 mm Minimum fork height ≤ 90 mm Traction / lifting motor 0.75 kW AC / 2.2 kW DC Battery 24 V / 100 Ah (lead-acid) Battery weight 2×32.5 kg Charging time approx. 4 hours Charger power supply 230 V AC Travel speed (with / without load) 3.5 / 4.5 km/h Lift speed (with / without load) 100 / 155 mm/s Mast height (folded / extended) 2083 / 3568 mm Turning radius 1482 mm Weight 600 kg Operator platform: Foldable, with safety lock Nedpfezr E Dijx Ab Aodc Noise level: < 70 dB(A) Wheel type: Polyurethane Drive wheel size: Ø250 × 80 mm Bearing wheel size: Ø80 × 60 mm Additional wheels (dimensions): Ø115 × 55 mm Wheel arrangement (front/rear, x = driven): 1x, 2/4

Condition: used, Year of construction: 2007, DEMAG Ergotech System 1300/1500-11500 injection moulding machine from 2007 with 13,000 kN clamping force, 110 mm screw diameter and 5,200 g shot weight. Equipped with a Wittmann DR 853 227 linear handling robot (2014) featuring servo B axis 270° and C axis 90°, plus 32 hot runner control zones for advanced multi-cavity production. Factory-configured with 4 hydraulic core pulls and 12 cascade circuits for complex technical moulding applications. CNC CONTROL Controller: Demag Ergocontrol CLAMPING UNIT Clamping force kN: 13.000 Tie-bar clearance (H x V) mm: 1.500 INJECTION UNIT Injection unit size (Euromap): 11500 Screw diameter mm: 110 Max. shot weight (PS) g: 5.200 MOULD FUNCTIONS & HANDLING Hydraulic core pull circuits: 4 Cascade / valve gate circuits: 12 Ndodezz Rw Hspfx Ab Aec Hot runner control zones: 32 Handling robot (model / year): Wittmann DR 853 227 (2014) Robot strokes X / Y / Z mm: 1.600 / 2.500 / 3.500 Robot rotary axes (B / C): C 90° / B servo 270° DRIVE Max. hydraulic pressure bar: 190 Mains connection V / Hz / A: 3 x 400 / 50 / 348 + 201

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, CNC turning and milling center Okuma Multus B400 1SC-1500 Control system: OSP-P200L Year of manufacture: 11/2010 Internal machine number: 61 X-axis: 690 mm Y-axis: +115 / -115 = 230 mm Nodpjzwl U Sjfx Ab Asdc Z-axis: 1,545 mm B-axis: up to 225°, positioning in 0.001° C-axis: 360° / 0.001° Turning length: 1,500 mm Turning diameter: 710 mm Spindle bore: 110 mm Tool holder: HSK 63 Tool magazine: 40 positions Equipment: - Chip conveyor - 3-jaw chuck SMW KNCS-N-340-117 - Paper band filter system ISF 540/6670 - One Touch IGF - Tailstock - Touch setter

Condition: used, Year of construction: 2008, cutting diameter 1500 mm saw band length 15050 mm cutting width 2000 mm total power requirement 45 kW weight of the machine ca. 43.500 kg required space 3862 x 2110 mm FRIGGI 2MF GANTRY 1500 x 2000 x 9000 Manufacturer: FRIGGI S.r.l. Address: Via Vitt. Veneto 13, 20086 Motta Visconti (MI), Italy Model: 2MF GANTRY Type / Version: 1500 x 2000 x 9000 Serial Number: 3610 Year of Manufacture: 2009 Weight: 43500 kg CUTTING CAPACITY Rectangular Profile: 1500 x 2000 mm Round Profile: Ø 1500 mm Gantry Stroke: 9600 mm SAW BLADE Band Dimensions: 80 x 1.6 mm Max. Band Length: 15050 mm Band Speed: 10 – 120 m/min DRIVES Band Motor Power: 18.5 kW Bow Motor Torque: 12 Nm Gantry Motor Power: 2 x 12 Nm Flywheel Diameter: 2x 1200 mm + 2x 620 mm HYDRAULICS Hydraulic Tank Capacity: 120 Liters Hydraulic Pump Flow Rate: 23 l/min Hydraulic Pump Motor Power: 4 kW ELECTRICAL DATA Installed Power: 45 kW Supply Voltage: 400 V Max. Current Draw: 80 A Frequency: 50 Hz Power Factor: 0.8 COLOR Structure Color: RAL 7039 Flywheel Covers Color: RAL 7021 Moving Parts Color: RAL 2004 Nsdpfx Aezk Rh Rsb Ajdc TYPE PLATE / CE DECLARATION CE Marking: Yes (Directive 98/37/EC etc.) CE Declaration Date: 19.03.2009

Condition: used, Year of construction: 2008, machine/vehicle number: 1462, number of blades: 73, LINDNER MICROMAT 1500 – 75 kW – 2008 – OPERATIONAL MACHINE, TESTING POSSIBLE For sale: a Lindner Micromat 1500 single-shaft shredder from the renowned Austrian company, Lindner Recyclingtech. This machine has a power output of 75 kW and was manufactured in 2008. It is designed for the industrial shredding of plastics. Ndsdpfxsz Ayays Ab Asc Technical specifications: Manufacturer: Lindner Recyclingtech Model: Micromat 1500 Year of manufacture: 2008 Power: 75 kW Power supply: 400 V / 50 Hz Machine number: 1462 Country of origin: Austria CE marking The machine is currently connected to an operational production line. It is possible to start and test the shredder directly in the hall, under real operating conditions. Arrangements can be made in advance for an inspection and a demonstration of the machine's operation in the hall.

Condition: ready for operation (used), Year of construction: 2019, Multi-spindle drilling machine manufactured in 2019. This COMEC FMOV 1500 6UF + CA2 features a working width of 1500 mm and a working depth of 300 mm, allowing for efficient processing of long workpieces up to 1500 mm in one cycle. It includes an automatic parts loader and pneumatic clamping for enhanced productivity. If you are looking to get high-quality drilling capabilities, consider the COMEC FMOV 1500 6UF + CA2 machine we have for sale. Contact us for further details. • Configuration: 6 multiple heads arranged on 3 working lines • Workpiece capacity: Drilling of long workpieces up to 1500 mm in one cycle • Working width (X): 1500 mm • Working depth (Y): 300 mm • Max. clamping height: 70 mm • Top surface processing: Yes • Horizontal processing: Yes • Interchangeable aggregates: Yes • Positioning: Manual • Drilling feed: Pneumatic • Clamping: Pneumatic • Control: PLC with selectable work cycles • Modularity/customization: High • Cleaning and waste system: Integrated, efficient Njdszuhb Aepfx Ab Aodc • Certification: CE Additional equipment • Automatic parts loader (synchronized with the machine cycle)

Year of construction: 2002, condition: used, We offer this used MAPLAN MTF 1500/280, year of manufacture 2002. Machine type: MTF 1500/280 Serial number: 1120157 Year of manufacture: 2002 Connected load: 66 kW Control type: B&R - CP260 Panel type: Maplan PC 4000 - DOS Year of manufacture: 2002 Condition: ready for operation (used) Operating hours: 86,018h Description: Clamping force: 2800kN Injection volume: 1500ccm Distance between tie bars (width): 600mm Distance between tie bars (length): 220mm Heater plate size (LxW): 630/500mm Daylight (distance between open plates): 500mm Connected load: 66kW Power supply: 3x 400V/50Hz Machine dimensions (LxWxH): approx. 3.30x3.30x3.20 m Ndedpfjyf E Naex Ab Ajc Machine weight: approx. 7000kg Input current type: standard industrial three-phase Equipment: documentation If you have any further questions or require more information, please send us a message or call us.

Condition: good (used), Linear drive, linear gearbox, lifting gearbox, spindle drive, linear axis, toothed belt axis -Manufacturer: Festo, Linear actuator type DGE-25-1500-ZR-LK-RH-KF-GK -Stroke length: 1500 mm -Servo motor: Festo type EMMS-AS-55-M-LS-TM -Planetary gearbox: Neugart PLE 80 -Quantity: 5 pieces available Price: per piece -Dimensions: 1880/70/H340 mm Nedpfeud Urrex Ab Aedc -Weight: 12.7 kg/pc.

Condition: excellent (used), Year of construction: 2024, operating hours: 3,540 h, functionality: fully functional, punching force: 280 t, X working area max.: 3080 mm Y working area max.: 1540 mm Operating hours: 3540 hrs Control: CNC control LABOD with graphics Standard equipment Hydraulic punching machine - Punching force: approx. 280 kN (28 tons) Njdpfx Absz Rmans Ajdc - Throat depth: approx. 1750 mm - Max. punching diameter: 70.0 mm - Max. stroke height: 90 mm, steplessly programmable up and down via control - Table width left + right: 3430 mm each - Table depth: 3160 mm - Table height: 900 mm + 8 easily exchangeable cassette holders + Rotary drive, tool holders top and bottom continuously rotatable 360° + 1 piece, indexable Revotool tools + Programmable clamp positioning + Scrap slug extraction system + Spray device + Brush table + Brush table extension tables + Multitalk, USB, SD memory card and network connection + Digital stroke height adjustment + Three-sided safety light barrier + Various intermediate matrix plates for Trumpf tooling sizes 1 and 2 + Tooling package + 1 set of keys and operating manuals + Boschert EasySharp tool grinding device

Year of construction: 2022, condition: used, Carsoe Group Anytray Buffer 1500 – Pneumatic Tray Buffer System Manufacturer: Carsoe Model: Anytray Buffer 1500 LLANONE Right Pneumatic Year of manufacture: 2022 Machine type: Tray buffer / product accumulation system Description The Carsoe Anytray Buffer 1500 is a pneumatic tray buffering system designed to temporarily accumulate and manage trays within automated food processing and packaging lines. The system helps stabilize product flow and prevents interruptions between processing machines. Built with hygienic stainless steel construction, the unit is suitable for demanding food production environments, especially in seafood and protein processing facilities. Technical Specifications - Manufacturer: Carsoe - Model: Anytray Buffer 1500 LLANONE Right Pneumatic - Year: 2022 - Power: 0.46 kW - Supply voltage: 230 VAC + N + PE - Frequency: 50 Hz Ndsdpfx Aoyt Hu Teb Aoc - Air pressure: 6 bar - Max short-circuit current: 6 kA - SO-No.: FOD 220002 - Part number: P09390 Key Features - Pneumatic tray buffering system - Designed for stable product flow in production lines - Hygienic stainless steel construction - Suitable for high-capacity food processing environments - Easy integration into automated tray handling systems Applications - Seafood processing lines - Ready meal tray production - Automated packaging lines - Food processing plants Condition Used . More photos and full specifications: /

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 1,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 700 mm, total height: 3,067 mm, total width: 3,413 mm, table width: 800 mm, table length: 1,700 mm, table load: 1,500 kg, overall weight: 14,000 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 18,500 W, product length (max.): 4,270 mm, number of axes: 3, This 3-axis KNUTH X-MILL 1500 CNC was manufactured in 2011. It features an impressive X-axis travel of 1500 mm, Y-axis travel of 800 mm, and Z-axis travel of 700 mm. The machine includes a robust table size of 1700 x 800 mm with a load capacity of 1500 kg. If you are looking to get high-quality machining capabilities, consider the KNUTH X-MILL 1500 CNC vertical machining centre we have for sale. Contact us for further details. Njdpfeziaggox Ab Asdc - Number of T-slots: 5- T-slot Width: 22 mm- T-slot Spacing: 135 mm- Spindle Nose to Table Surface Distance: 170-870 mm- Throat Depth: 800 mm- Spindle Speed Range: 60-8000 rpm- Spindle Taper: MAS BT 50- X-axis Rapid Feed Rate: 15000 mm/min- Y-axis Rapid Feed Rate: 15000 mm/min- Z-axis Rapid Feed Rate: 10000 mm/min- Working Feed Rate: 5-5000 mm/min- Tool Changer Capacity: 24 positions- Positioning Accuracy: ±0.01 mm / ±0.00039"- Repeatability Accuracy: ±0.005 mm / ±0.0002"- Main Drive Motor Power (continuous / 30 min): 15 / 18.5 kW (15 / 25 Hp)- Total Power: 18.5 kW- Voltage: 400 Volt- Frequency: 50 Hz / 3 Phases Technical Specification Taper Size BT 50

Year of construction: 2006, condition: ready for operation (used), A Precicut CNC laser precision machining system is available. 1) Fiber laser IPG Photonics YLR-150/1500-QCW-MM, year of manufacture: 2012, average laser power: 150W, pulse power: 1.5kW. 2) Collimator d25 f50, year of manufacture: 2012, focal length: 50mm, diameter: 25mm. 3) Coupling module for BAK 4, year of manufacture: 2012. 4) ProCom CNC300 control unit. Documentation available. On-site inspection is possible. Ndsdpswqqwbsfx Ab Aoc

Condition: defective spare-parts repository (used), Year of construction: 1994, functionality: not functional, We are selling an industrial robot, type IRB 1500, with an S3 controller from ABB Robotics, manufactured in 07/1994. Ndsdpfx Abszh Uvgj Aoc The unit is defective/not operational and displays the following error messages (see photos): - 506 Servo error 2 - 536 Motor overload error The robot can be moved slightly intermittently until the error messages reappear. We are selling the robot as a complete package, including the control cabinet, operator panel, and metal frame. Individual parts are not for sale. Please note that we offer neither a guarantee nor a warranty. Returns after purchase are not possible. After the purchase, the robot can be collected by appointment during our business hours. If required, we will gladly assist with loading. Selling price: €3,250 (negotiable) plus VAT.

Condition: good (used), Year of construction: 2020, PLC controller, central assembly, RAM, CPU, central processing unit, central device -Manufacturer: Siemens, SIMATIC S7-1500 CPU 1515-2 PN -Type: 6ES7 515-2FM02-0AB0 -CPU: 1515-2 PN -Quantity: 3x assembly available -Price: per piece -Dimensions: 125/70/H155 mm -Weight: 0.5 kg/pc. Ndedpexxvblefx Ab Aec

Year of construction: 2001, condition: used, Total power: 6kW, voltage: 400V, frequency: 50Hz/3-phase. Documentation available. Inspection by appointment possible. Nodpfjz Dki Sjx Ab Asdc