Used Spinner 650 for sale (3,086)

Condition: repair required (used), Year of construction: 2006, operating hours: 500 h, functionality: not functional, Control unit: SIEMENS Sinumerik 840D Table clamping surface: 650 x 410 mm Max. table load: 250 kg T-slots: 3x 14 mm X-axis travel: 560 mm Y-axis travel: 410 mm Z-axis travel: 410 mm Spindle speed range: max. 12,000 rpm Spindle drive power: 12 / 18 kW Tool magazine capacity: 24 positions Max. tool diameter: 77 mm Max. tool diameter (with vacant adjacent slots): 125 mm Max. tool length: 200 mm Max. tool weight: 5.0 kg Tool change time: approx. 1.3 sec Rapid traverse (X / Y / Z): 48 m/min Total power requirement: approx. 30 kW Machine weight: approx. 4.0 tons Required floor space: approx. 3000 x 2000 x 2500 mm Equipment and Accessories: - NC rotary table (2-axis) Bedpsy U Hw Eofx Afmswp - Coolant system - Spindle chiller - Machine feet Status Note:The machine is located in a technical vocational school and due to very infrequent use, the backup batteries have drained. These need to be replaced and the parameters must be reloaded.

Condition: good (used), Year of construction: 1990, type of input current: three-phase, Film wrapping machine + shrink tunnel KUPER DUPLEX 2100/650 + KUPER ST/I-1400 Film wrapping machine Manufacturer: Kuper Type: DUPLEX 2100/650 Year of manufacture: 1995 Film roll width at the top: 2000 mm Film roll width at the bottom: 2000 mm Packaged goods height (passage height): 650 mm Film roll diameter: 400 mm Compressed air: min 5 bar Compressed air consumption (per cycle): approx. 16 L swing arm with chain lift seal bar length 2100 mm "Siemens" control panel overall dimensions: 3000x2000x2300 mm Shrink tunnel: Manufacturer: Kuper ST/I-1400 year of manufacture: ca 1988 Bwedskn Rz Hepfx Afmjp max capacity: width: 1350mm height: 650mm work length: 3000mm 2 pcs centrifugal fan blow-off units heating power: 59 kW temperature range 230 °C endless conveyor belt throughput speed 5 m/min Length: 3500 mm Width: 2350 mm Height: 1850 mm

Condition: ready for operation (used), Year of construction: 2009, operating hours: 1,000 h, travel distance X-axis: 360 mm, travel distance Z-axis: 980 mm, controller manufacturer: SIEMENS, controller model: 840D Solution Line, number of axes: 4, This 4-axis SPINNER TC800 was manufactured in 2009. It features a radial turret and is equipped with Siemens control, ensuring reliable operation. With approximately 1,000 operating hours, this machine has been barely used. If you are looking to get high-quality turning capabilities, consider the SPINNER TC800 horizontal turning machine we have for sale. Contact us for further details. • Control: Siemens 840D Solution Line • X-axis travel: approx. 360 mm • Z-axis travel: approx. 980 mm • Rapid traverse X-axis: approx. 18 m/min • Rapid traverse Z-axis: approx. 24 m/min • Main spindle speed: up to approx. 4000 rpm • Main spindle power: approx. 24 kW (100%) • Main spindle power: approx. 33 kW (40%) Bwedpfjyv Epvox Afmjp • Spindle nose: A8 • Bar capacity: approx. 77 mm • Counter spindle: Yes • Counter spindle speed: up to approx. 5000 rpm • Counter spindle power: approx. 15 kW • Counter spindle spindle nose: A6 • Counter spindle bar capacity: approx. 52 mm • Tool turret type: VDI 50 • Number of tool stations: 12 • Driven tools: Yes • Number of driven tools: up to 12 • Driven tool speed: up to approx. 4000 rpm • Maximum turning diameter: approx. 500 mm • Maximum swing over bed: approx. 800 mm • Maximum turning length: approx. 800 mm • Tailstock: Yes • Tailstock taper: MK4 • Tailstock stroke: approx. 100 mm • Tailstock force: approx. 8500 N • Voltage: 400 V • Frequency: 50/60 Hz • Control voltage: 24 V DC • Compressed air pressure: approx. 6–10 bar • Hydraulic pressure: approx. 70 bar • Chip conveyor: Yes • Coolant system: Yes • Hydraulic unit: Yes • Electrical cabinet: Yes • Radial turret • No quill • Barely used, approximately 1,000 operating hours Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: repair required (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 465 mm, workpiece weight (max.): 500 kg, table load: 500 kg, rotary table diameter: 650 mm, spindle speed (max.): 20,000 rpm, CNC Heidenain 620 WORK AREA: Longitudinal X: 630 mm Transversal Y: 530 mm Vertical Z: 465 mm SPINDLE: Tool attachment cone: HSK 63 Speed: 20.000 rpm Power: 28 kW Torque: Nm 100 TOOL CHANGER: Tool magazine: 32 places Maximum tool diameter/with free adjacent positions: 76 / 130 mm Bwsdpjzblf Hjfx Afmjp Maximum tool weight: 7 kg Maximum tool length: 300 mm CN ROTARY TABLE WITH CN SWIVEL AXIS: Table diameter: 650 mm Permitted load: 500 kg B axis: -5° (-90°) /+110° DIMENSIONS AND WEIGHTS: Weight: 8.000 kg Dimensions: mm2.735x2.420x2.820h 5 PALLET PALLET CHANGE SYSTEM: - Base frame as electro-welded rigid - Security carter with all the security elements on the island - 5 pallet racks - Movement system for loading and unloading pallets - Pneumatics, electrical and control system of the island Storage of 5 pallets measuring 400 x 400, fixing the pallets on the pallet racks, total weight between pallet and piece 100 kg. Machine complete with: • Optical lines in X/Y/Z • Chip conveyor • 70bar TW high pressure refrigerant, external tank with paper filter • TNC software option "continuous 5-axis interpolation and 3D machining" • Piece feeler for machining centres, Blum TC 52 system • WIRELESS infrared probe for the mechanical probing of tools • Instruction manuals and CE declaration

Condition: excellent (used), Year of construction: 2007, Type: CNC Lathe (horizontal) Manufacturer: Spinner Model: TC 52 Year of manufacture: 2007 Serial number: 123445 Control: Fanuc Three-axis machine: XZ C (C-axis is positioning only – no driven tools) Bodpfjyki Hmex Afmowp Bar diameter: 42 mm Three-jaw chuck: 165 mm Operating/spindle hours: approx. 32,500 h / 6,400 h (read 11/2025) Accessories: chip conveyor, high-pressure coolant (IKZ), chuck, documentation Condition: Good

Condition: used, Year of construction: 2008, turning diameter 310 mm turning length 600 mm control Sinumerik 810 D PL Siemens turning diameter over bed 425 mm turning speed range - main spindle 500 - 4.500 min/-1 max. Torque 280 Nm power capacity - main spindel 16,5 kW Spindle diameter 100 mm C-Axis 360 ° chucking diameter 210-52 mm spindle bearing diameter 120 mm clamping cylinder 65 mm Bar feed max. 65 / (52) mm spindle nose A8 DIN 55026 x-axis 230 mm z-axis 740 mm Bjdpfx Afetqmqhemjwp rapid traverse X-axis 15 m/min rapid traverse Z-axis 24 m/min tool positions turret 12 pos. driven statition 12 pos. tool taper VDI 30 DIN 69880 Spindle speed driven tools 6.000 min -1 power capacity - driven tools 3,7 kW max. Torque 9,5 Nm dia. of quill MK 4 80 mm quill stroke 120 mm tailstock adjustment 475 mm tension force 500 daN weight of the machine ca. 4,2 t dimensions of the machine ca. 3,7 x 2,2 x 1,8 m CNC - Turning- and Milling Center SPINNER - TC 65 MC - Turret completely overhauld

Condition: good (used), Year of construction: 1999, functionality: fully functional, turning diameter over cross slide: 450 mm, turning length: 580 mm, turning diameter: 300 mm, spindle speed (max.): 6,000 rpm, For sale: SPINNER TC46 CNC lathe, manufactured in 1999 and equipped with a Siemens Sinumerik control system. The machine is in good technical condition and has been regularly maintained. It is suitable for precision turning operations and serial production of shafts, flanges and other turned components. Considering its age, the machine is well preserved and remains fully operational. Inspection under power is possible by prior appointment. Bwodpfezar Nvox Afmop

Condition: good (used), Year of construction: 2012, functionality: fully functional, turning diameter over cross slide: 400 mm, turning length: 500 mm, turning diameter: 280 mm, spindle bore: 52 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 515 mm, Well-maintained SPINNER TC400 CNC lathe manufactured in 2012 and equipped with Siemens Sinumerik 840D ShopTurn control. The machine is in good technical condition, regularly serviced and ready for immediate operation. This machine is equipped with a tailstock and is ideal for the machining of shafts, flanges and precision turned components. Its rigid construction and reliable Siemens control system ensure excellent machining accuracy and productivity. The machine can be inspected under power by prior arrangement. Bsdpfozarxwox Afmjwp

Condition: good (used), Year of construction: 2005, operating hours: 9,999 h, functionality: fully functional, SPINNER Werkzeugmaschinenfabrik GmbH Used CNC Lathe Model: SPINNER UP65 Year of manufacture: 2005 Control: Siemens Sinumerik 840 Main spindle + counter spindle Sauter turret with driven tools Operating hours: 80,412 h Accessories: 3 driven tools, 10 standard tools with holders, 8 empty holders CE certified Buffer battery last changed in March No chip conveyor Typical technical specifications of the SPINNER UP65: • Max. turning diameter: approx. 300–400 mm • Max. turning length: approx. 600–1,000 mm Bedjy Sr Iqspfx Afmowp • Swing over bed: approx. 500–600 mm • Spindle bore: 65 mm main spindle • Main spindle speed: approx. 4,000–5,000 rpm • Counter spindle speed: up to approx. 6,000–7,000 rpm • Main spindle drive power: approx. 15–22 kW • Turret: Sauter tool turret with driven tools • Tool holder: typically VDI30 • Travel paths: X approx. 200–250 mm, Z approx. 600–1,000 mm • Rapid traverse: X approx. 20 m/min, Z approx. 24 m/min • Control: Siemens Sinumerik 840 • Machine weight: approx. 4,500–6,500 kg Chucks: • Main spindle: Ø160 with Ø81, through bore Ø60 • Counter spindle: Ø160 with Ø43

Condition: used, Year of construction: 2018, functionality: fully functional, travel distance X-axis: 1,520 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, rapid traverse Z-axis: 32 m/min, controller manufacturer: SIEMENS, controller model: 840D, rotational speed (max.): 12,000 rpm, overall weight: 10,000 kg, spindle speed (max.): 12,000 rpm, spindle nose: ISO 40, number of slots in tool magazine: 32, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Year: 2018, CE compliant Bodpfey Azclsx Afmowp CNC: SIEMENS 840D with SHOP MILL 4+1 axes ONLY 18,300 power-on hours Worktable dimensions: 2-piece table - fixed 920x540 mm / rotary-tilting 650x500 mm (with extension ring) Longitudinal X-axis travel: 1520 mm Transversal Y-axis travel: 520 mm Vertical Z-axis travel: 420 mm Spindle taper type: ISO 40 Spindle speed: 12,000 rpm Automatic tool changer: 32 positions Spindle motor power: 15 kW Approximate net weight: 10,000 kg Accessories: Internal coolant Chip conveyor Full upper enclosure Pneumatic door opening BLUM tool presetting and workpiece probe capability

Condition: used, Year of construction: 2000, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 560 mm, spindle speed (max.): 8,000 rpm, spindle nose: BT-40, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Vertical machining center with pallet changer on moving column (ROTOPALLET) with spindle line and spindle motor fully refurbished as new. CNC SIEMENS 840D. Tool magazine with 40 positions. Chip conveyor. High-pressure pump through the spindle. Spindle cooler. Remote electronic handwheel. Bsdpfx Afsydhyxjmswp

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: AB0704, travel distance X-axis: 810 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 810 m/min, rapid traverse Y-axis: 610 m/min, rapid traverse Z-axis: 610 m/min, controller manufacturer: Siemens, controller model: Sinumerik 810D, workpiece weight (max.): 1,000 kg, table load: 1,000 kg, rotational speed (min.): 8,000 rpm, rotational speed (max.): 8,000 rpm, overall weight: 5,000 kg, number of slots in tool magazine: 32, input voltage: 400 V, type of input current: three-phase, Equipment: CE marking, chip conveyor, rotational speed infinitely variable, The Spinner VC810 is a high-precision, German-made 3-axis CNC vertical machining center. Its rigid cast iron construction ensures stable and vibration-free machining. This reliable, European-made machine is specifically designed for complex milling and drilling operations in tool and machine manufacturing. It is used in custom manufacturing. Regularly maintained. The tool changer has one faulty spindle. Currently in production until the end of June 2026 (can be viewed in operation by prior arrangement). Net price. Bwjdpfoy Uvr Sex Afmjp

Condition: used, Year of construction: 2015, turning diameter 250 mm turning length 600 mm control FANUC Series 31i-Model A total power requirement 23 kW weight of the machine ca. 7,7 t Bjdpfx Ajy Ralnsfmswp dimensions of the machine ca. 2.880 x 2.130 x 1.990 mm m

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: AB1038, travel distance X-axis: 1,160 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 1,160 mm, feed length Y-axis: 610 mm, feed length Z-axis: 610 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: Sinumerik 840D, table width: 610 mm, table length: 1,320 mm, rotational speed (min.): 12,000 rpm, rotational speed (max.): 12,000 rpm, overall weight: 7,000 kg, tool length: 200 mm, tool weight: 5,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, This machine was not used for mass production. Accuracy: ±0.01 mm. It has been regularly maintained, both electronically and mechanically, e.g., new ball screws were installed one year ago. Bjdpfoy T Nggjx Afmowp Equipped with an oil mist separator. It is in daily use until the end of June 2026 (and can be viewed in operation until then). Net price.

Condition: used, Manufacturer: HERAEUS Model: RL 250 Internal dimensions: Diameter: 315 mm Depth: 450 mm Bwedpfxey Nlcvs Afmjp

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: AB1052, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 410 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 560 mm, feed length Y-axis: 410 mm, feed length Z-axis: 410 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: Sinumerik 840D, workpiece length (max.): 650 mm, workpiece width (max.): 450 mm, workpiece height (max.): 450 mm, workpiece weight (max.): 250 kg, total height: 2,500 mm, total length: 2,000 mm, total width: 3,000 mm, table width: 450 mm, table length: 650 mm, table load: 250 kg, rotational speed (min.): 12,000 rpm, rotational speed (max.): 12,000 rpm, overall weight: 4,000 kg, tool length: 200 mm, tool diameter: 77 mm, tool weight: 5,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, This machine was not manufactured for mass production. Accuracy: +-0.015 mm. It has been regularly maintained, both electronically and mechanically; for example, it received new ball screws and linear guides two years ago. Equipped with an oil mist separator. It is in daily use until the end of June 2026 (and can be inspected while in operation until then). Bsdpfx Ajy Tv Nnsfmjwp

Condition: good (used), Year of construction: 2023, Spinner TC 600, Year of manufacture 2023, Bwedpfxoy Thmle Afmop Fanuc 32 i TB control system, Travel range X/Z 275/700 mm, Chip conveyor, Tailstock, 16-position turret, VDI 40, C-axis, Powered tool holders, 3-jaw chuck Ø 250 mm.

Condition: as good as new (ex-display), Year of construction: 2020, machine/vehicle number: VT0341, functionality: fully functional, High-performance machining center SPINNER VC850-5A Travel distances X850, Y510, Z510 mm High-performance milling spindle up to 18,000 rpm Power Pmax 20 kW / Nmax 66 Nm as a built-in hybrid spindle with direct drive, without belt Tool holder on the spindle HSK63 TOOL MAGAZINE with 32 tool stations DIRECT MEASURING SYSTEMS in the X/Y/Z axes In the latest generation of SIEMENS "SINUMERIK ONE" control system - SPINNER - SPIOS 24" touch operating panel for I4.0 applications - Operating panel height-adjustable, rotatable and tiltable for best ergonomics - incl. engraving cycles - 24" liquid crystal flat color screen with multi-touch functionality - User memory 2 GByte - 15 zero-point shifts - 1 free USB interface - Ethernet interface standard SPINNER MULTI-CONTROL WHEEL on the operating panel, integrating the following functions into a single control element: - Handwheel function in jog mode Bwsdpfsy S Ttzex Afmjp - Feed override in automatic mode - Start button and feed influence in single-block setup mode, automatically resetting to 0% at the end of the sequence -> all important functions of the setup mode integrated into one control element Electrical preparation for HOWIMAT 2-axis rotary tilting table on VC850/VC1150 2-axis ROTARY TILTING TABLE mounted on the right in the working area particularly rigid and space-saving, suitable for holding chucks or collets TILTING AXIS: - Dividing accuracy +- 0.005 degrees - Swivel range 105 degrees - Maximum tangential moment 1,200 Nm ROTARY AXIS with direct drive via coaxial motor: - Dividing accuracy +- 0.005 degrees - Bore 80mm, spindle nose D=160 mm - Maximum tangential moment 500 Nm UNIVERSAL CHIP CONVEYOR VC850 PREPARATION of the spindle FOR HIGH PRESSURE for using the additional tank up to 70/80 bar HIGH-PRESSURE TANK 70bar with paper band filter for flushing centrally through the spindle Additional compressed air supply at the spindle head Compressed air centrally through the milling spindle Flushing gun in the working area PREPARATION FOR SPINNER STANDARD PROBING SYSTEM Wireless SPINDLE PROBE ADDITIONAL HOOD on top for a closed working area STANDARD DOCUMENTATION in German consisting of machine manual and CNC manuals is delivered in digital form on the control system. Paper manuals available at an additional cost. RING EYES for crane unloading, set consisting of 4 pieces absolutely necessary for crane transport STANDARD PAINTING two-color in light gray RAL7035 and blue-gray RAL5008 Electrical design EUROPEAN STANDARD as follows: Operating voltage 3x400V +/-10% Mains frequency 50Hz (+/-2%) TN network (5-conductor) Notes: The price includes warranty services only within Germany. In the case of new and demonstration machines, the images are not necessarily of the individual machine, but of comparable machines. Accessories shown, such as clamping devices or tool holders, are included in the scope of supply only to the extent listed in the technical description. Please request a detailed offer ex works. Visit our factory near Munich or one of our showrooms. We may have other offers for comparable machines. Subject to prior sale.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, machine/vehicle number: VT0479, VC850 travels: X850, Y510, Z510 mm High-performance milling spindle up to 12,000 rpm as a built-in hybrid spindle with direct drive, without belt Tool holder on spindle SK40 DIN69871 with pull stud DIN69872-A / ISO 7388-3-AD TOOL MAGAZINE with 32 tool stations DIRECT MEASURING SYSTEMS in X/Y/Z axis SIEMENS 840DE control with the following basic features: - SPINNER - SPIOS 24" touch panel for I4.0 applications - Control panel height-adjustable, rotatable and tiltable for best ergonomics - incl. engraving cycles - 24" liquid crystal flat color screen with multi-touch functionality - User memory 2 GByte - 15 zero-point offsets - 1 free USB interface - Ethernet interface standard In the latest generation of SIEMENS "SINUMERIK ONE" control - SPINNER - SPIOS 24" touch panel for I4.0 applications - Control panel height-adjustable, rotatable and tiltable for best ergonomics - incl. engraving cycles - 24" liquid crystal flat color screen with multi-touch functionality - User memory 2 GByte - 15 zero-point offsets - 1 free USB interface - Ethernet interface standard SPINNER MULTI-CONTROL-WHEEL on the control panel, integrating the following functions into a single control element: - Handwheel function in jog mode - Feed override in automatic mode - Start button and feed influence in single-block setup mode, automatically resetting to 0% at the end of the block -> all important functions of the setup mode integrated into one control element - SHOPMILL - 3D SIMULATION - REMNANT MATERIAL RECOGNITION - DXF reader Fully integrated 1-axis TILTING TABLE, centrally mounted in the working area on the table, with: - Pivoting cheek approx. 580mm long for 3-sided machining - Swivel range of the A-tilting axis is infinite - Counter bearing to support the rotary table bridge UNIVERSAL CHIP CONVEYOR VC850 PREPARATION of the spindle FOR HIGH PRESSURE for the use of the additional tank up to 22 bar HIGH-PRESSURE TANK 22 bar Additional compressed air on the spindle head Bwsdpfxoy S Tpie Afmop Compressed air centrally through the milling spindle, alternatively to coolant nozzle in the working area PREPARATION FOR SPINNER STANDARD MEASURING PROBE Wireless SPINDLE PROBE universal robot interface UNIROB CLAMPING HYDRAULICS incl. 2 pcs. 4/4-way VALVE for workpiece clamping up to 200 bar hydraulically STANDARD DOCUMENTATION GERMAN consisting of machine manual and CNC manuals is supplied in digital form on the control. Paper manuals available at an additional cost LIFTING LUGS for crane unloading, set consisting of 4 pcs. mandatory for crane transport STANDARD PAINTING two-tone in light gray RAL7035 and blue-gray RAL5008 Electrical design EUROPEAN STANDARD as follows: Operating voltage 3x400V +/-10% Mains frequency 50Hz (+/-2%) TN network (5-conductor) Notes: The price includes warranty services only within Germany. For new and demonstration machines, the images are not necessarily images of the individual machine, but of comparable machines. Accessories shown, such as clamping devices or tool holders, are only included in the scope of supply to the extent listed in the technical description. Ask for a detailed offer ex works. Visit our factory near Munich or one of our showrooms. We may have other offers for comparable machines. Subject to prior sale.

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 360 mm, travel distance Z-axis: 900 mm, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 4, This 4-axis SPINNER TC800 110 SMCY was manufactured in 2016. It features a maximum X-axis travel of 360 mm and Z-axis travel of 900 mm, along with a sub spindle and live tool capabilities. If you are looking to get high-quality turning capabilities, consider the SPINNER TC800 110 SMCY horizontal turning machine we have for sale. Contact us for further details. • Tool setter Technical Specification Counter Spindle Yes Bjdpfx Aoy En Awofmswp Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 2,660 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 10,000 rpm, number of axes: 5, This 5-axis SPINNER U5-2520 was manufactured in 2016. It features an impressive X-axis travel of 2660 mm, Y-axis travel of 520 mm, and Z-axis travel of 460 mm. The machine is equipped with a spindle speed of 10,000 rpm and an automatic tool changer with 2x52 positions. If you are looking to get high-quality machining capabilities, consider the SPINNER U5-2520 vertical machining centre we have for sale. Contact us for further details. Bwedpfx Afjy Efxijmjp • B-axis: +110° / -90° • ATC: 2 x 52 tools Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 2008, Ref. -No.: 10474 Manufacturer: SPINNER Type: TC77 MCY Year of construction: 2008 Type of control: CNC Control: Siemens 840 D Storage location: Halberstadt Country of origin: Germany Machine-No.: AP0XXXXX Chuck diameter: 210 mm Tailstock - diameter: 110 mm Feed speed X / Z: 15/24 mm / min Turning Diameter: 500 mm Max. Torque: 113 Nm Travel -X Axis: 350 mm Travel -Y Axis: 230mm (-110mm +120mm) mm Travel -Z Axis: 1160 mm Distance Between Centres: 800 mm Spindle 1 spindle head diameter (flange): A8 mm Spindle 2 spindle head diameter (flange): A6 mm Quills Morse taper: MK4 Turret places: 12 Pcs Machine length: 3250 mm Machine width: 1980 mm Machine Height: 2090 mm Weight Of The Machine Ca.: 7,5 t Max. swing diameter: 690 mm Bedpoy Ed Ebefx Afmswp Further information: Spindle head: A8 Bar capacity: 77mm Bar capacity: 52mm Number of rotating tool positions: 12 Y axis + C axis. Machine can be inspected under power by arrangement.

Condition: good (used), Year of construction: 2011, operating hours: 41,800 h, functionality: fully functional, turning length: 550 mm, turning diameter: 280 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 515 mm, spindle motor power: 11,000 W, rapid traverse X-axis: 15 m/min, rapid traverse Z-axis: 24 m/min, total height: 1,800 mm, total length: 2,100 mm, total width: 1,350 mm, quill travel distance: 500 mm, quill diameter: 60 mm, quill stroke: 125 mm, type of input current: AC, torque: 121 Nm, overall weight: 4,000 kg, chuck outer diameter: 225 mm, Equipment: documentation/manual, For sale is a TC400 52MC CNC turning machine from the German manufacturer Spinner Werkzeugmaschinenfabrik GmbH, built in 2011. It is in good used condition, with 41,816 hours of active operating time, of which 15,048 hours represent machining time. The machine has not been in operation for the last 5 years and was serviced by a Spinner technician in July 2025. It features a tool turret with 12 driven tools, an automatic workpiece removal system with a conveyor belt, a chip conveyor, and 4 foot pedals. The technical documentation in German and English, the wiring diagram of the electrical lines, the service manual, the latest maintenance reports, the original invoice, and several supplementary tool brochures are included in their original form. In addition, various tools are included, which are still functional, some of which have barely been used. Manufacturer: Spinner Werkzeugmaschinenfabrik GmbH Model: TC400 52MC Machine No.: AU0474 Year of manufacture: 2011 Weight: 4,000 kg The detailed technical specifications can be found in the excerpts from the technical documentation in images 2, 3, and 4. The price of the machine includes the machine itself, some tools and accessories, as well as loading onto a truck (a suitable forklift is available). Any shipping or collection must be arranged separately and is not included in the price. Bwedpfx Aoy Nxd Hjfmop The price of the machine is quoted as a net price. If you are interested, please contact us by email, direct message, or by phone. We will gladly send you a current video to demonstrate the machine's functionality upon request. Fitok GmbH, Moritz Hanesch, 07.05.2026, updated 28.05.2026

Year of construction: 2002, condition: ready for operation (used), A lathe Spinner requiring repair is available. Travel X/Z: 96mm/245mm, max. turning length: 245mm, max. swing diameter: 120mm, turning diameter over bed: 290mm, spindle bore: 42mm, speed: 6000rpm, rapid traverse: 15m/min, tool stations: 12, tool holder: VDI16, bar passage: 42mm. Machine dimensions X/Y/Z: approx. 4400mm/1200mm/2200mm, weight: approx. 3000kg, control: Siemens Sinumerik ShopTurn. Including bar feeder and drawer contents. The machine has the following problems: high measuring inaccuracy, problems with the handwheel and measuring arm as well as measurement deviation. Documentation available. An on-site inspection is possible. Bwodpfsy Igbwsx Afmep

Condition: ready for operation (used), Year of construction: 2020, operating hours: 25,585 h, spindle speed (max.): 7,000 rpm, controller manufacturer: FANUC, controller model: Series 31i-MODEL B, This SPINNER TTS 42 Lathe was manufactured in the year 2020 in Germany and has 25585 production hours. It is equipped with a Fanuc Series 31i-MODEL B control unit. The machine has a spindle speed of 7000 rpm. See tech specs file as PDF (German) attached for more details. Machine Benefits • main spindle was replaced 2023 • maintained internally • runs on emulsion • no fire extinguishing Qualitative Machine Benefits • Unimag interface for bar loading magazines • Parts conveyor belt • Spinner bar loading machine type servo. Make spinner, for spindles up to 42mm passage, for material d=4-42mm, length up to 3,200 mm • 10x external turning holder • 12x boring bar holders d=32 • 3x recessed boring bar holders • 6x straight agw • 3x axial agw • Material processed so far: aluminum, brass Technical Machine Benefits • Spindle 2 (counter spindle) in version up to 7,000 rpm - 42mm • Revolver 1 : 12-fold with cnc servo drive revolver 2 : 12-speed with cnc servo drive revolver 3 : 12-speed with cnc servo drive dmjgmx • Ejector unit integrated in counter spindle for ejecting parts into the parts catcher • Signal lamp on top of machine in three colors red/yellow/green as status display • Late conveyor as hinged belt conveyor exiting to the right, incl. Integrated coolant tank and return pump Bedpjyail Ujfx Afmewp • Coolant system as additional tank incl. Submersible pump 80l/4bar, high-pressure pump up to 80bar / 19. 5l/min • Flushing gun in the work area • Holder for messtaster on the machine bed as preparation for the use of a • Messtaster for tool measurement switching in 3 axes. • Extraction d=200 to the working area for connection to extraction system