Used Retorts / Autoclaves From Recently Closed Babyfoods Factory for sale (31,908)

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: TZ-JRT-30B-2800, Automatic log-cutting machine for toilet paper and hand towel cutting Fully automatic operation with advanced PLC control, LCD touchscreen, and servo motor. The machine is designed to minimize manual intervention, reduce labour requirements, and improve operator safety. The main operating parameters are set directly via the touchscreen PLC. The machine can be integrated with a converting and rewinding line for more efficient production. Designed for long-term industrial operation. Major components are imported, with the remaining components sourced from quality Chinese manufacturers. Technical Specifications Cutting diameter: 130–250 mm, adjustable via PLC Cutting length:50–380 mm, adjustable via PLC Maximum log length: 2,750 mm, adjustable via PLC Log lengths: Adjustable via PLC Cutting speed: Manually adjusted according to log diameter, thickness and cutting length Maximum stable operation speed: Up to 20 cuts/min for logs below 210 mm diameter and cutting lengths of 50–220 mm For cutting lengths above 220 mm: Automatic speed adjustment to approximately 10 cuts/min Automatic blade sharpening Automatic log loading/pick-up table Log storage rack with automatic feeding Automatic waste/reject removal via mechanical pusher (if using the push hand) Electrical connection: 3 × 400 V, 40 A Compressed air: 0.6 MPa Machine dimensions: 3,500 × 2,500 × 2,000 mm Weight: Approximately 3,000 kg (2 parts, cutter and the mechanical pusher) Country of manufacture: China Machine Condition The machine has been in operation at the factory and has been running without any major issues. Installation year 2020, running conditions about 7hrs /one shift. The following maintenance/repairs have been carried out: * Upper drive bearings replaced (2025) * Lower drive bearings replaced (2026) * Drive belts replaced (2026) * Damaged motion-control wiring repaired/replaced (2026) * Every 3-month inspection * Every 6-month lubrication of moving parts The machine is currently dismantled and stored in a dry warehouse. It can be inspected in its dismantled condition. Spare Parts Included Band saw blades: 4,400 × 70 × 0.65 mm price €105/pc, 9 unused blades, 1 sharpened and ready-to-work condition blade, 1 sharpened and ready-to-work blade (width narrow, still can cut most of the articles) Diamond grinding wheels: €80/pc, 1 spare New dust collector/vacuum system: €1,100 - purchased new but never installed (2-way suction and 1-way blown-in, with collection bin, direct attachment to the cutter) Other Information * Made in China - technical support within 24 hrs, spare parts in about 2 weeks. * Automatic operation * PLC + LCD touchscreen control (screen has original protection film still attached) Fgjdjzxnmyopfx Albjg * Servo-driven system * Suitable for toilet paper and hand towel logs * Suitable for integration into a converting/rewinding production line * Machine dismantled for storage Export outside the Baltic States Inspection possible by prior arrangement. Videos: youtu.be/8-xRCmvARYM youtube.com/shorts/vU4EunMEQt4 youtube.com/shorts/wwuV2Gp30AY youtube.com/shorts/WZjjokJjgZY

Condition: used, Year of construction: 2007, DEMAG Ergotech System 1300/1500-11500 injection moulding machine from 2007 with 13,000 kN clamping force, 110 mm screw diameter and 5,200 g shot weight. Equipped with a Wittmann DR 853 227 linear handling robot (2014) featuring servo B axis 270° and C axis 90°, plus 32 hot runner control zones for advanced multi-cavity production. Factory-configured with 4 hydraulic core pulls and 12 cascade circuits for complex technical moulding applications. CNC CONTROL Controller: Demag Ergocontrol CLAMPING UNIT Clamping force kN: 13.000 Tie-bar clearance (H x V) mm: 1.500 INJECTION UNIT Injection unit size (Euromap): 11500 Screw diameter mm: 110 Max. shot weight (PS) g: 5.200 Fjdpfxjzz Rw Ho Albjgg MOULD FUNCTIONS & HANDLING Hydraulic core pull circuits: 4 Cascade / valve gate circuits: 12 Hot runner control zones: 32 Handling robot (model / year): Wittmann DR 853 227 (2014) Robot strokes X / Y / Z mm: 1.600 / 2.500 / 3.500 Robot rotary axes (B / C): C 90° / B servo 270° DRIVE Max. hydraulic pressure bar: 190 Mains connection V / Hz / A: 3 x 400 / 50 / 348 + 201

Year of construction: 2023, condition: used, 5-drawer chest with Bystronic press brake blades See photos for details Online auction of modern and very well maintained metalworking machines (e.g. 2023 BYSTRONIC BYSMART FIBER 3015 10kW laser incl. tower- and sheet storage modules complete, 2x 2023 BYSTRONIC XPERT PRO press brakes, 3x 2023 VALK WELDING incl. PANASONIC welding robots, Q-FIN deburring and finishing, KASTO automatic saws, SIEGMUND welding clamping tables, HAAS machine tools etc.), previously in use at Lemken, the well-known manufacturer of agricultural equipment - including plows and seeders - in Dinteloord, The Netherlands, due to the relocation of the manufacturing. The online auction opens Thursday 3 September and closes Thursday 8 October. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 6 October Fgedpfx Aszyq Ipjlbjg Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, Year of construction: 2023, Overview This Robopac Genesis Futura HS pallet winder was built in 2023. It has under 500 operating hours - technically close to new. The rotating ring carries the pre-stretch carriage around the stationary pallet for high throughput without moving the load (see Capacity below). Delivered as a stand-alone unit with integrated roller conveyor, prepared for line integration over Ethernet TCP/IP. Technical data - Manufacturer: Robopac - Model: Genesis Futura HS - Year of manufacture: 2023 - Machine type: automatic rotating-ring stretch wrapper (pallet winder) - Operating hours: less than 500 h - Capacity: up to 92 pallets/h (13 wraps, H 1,000 mm), 77 pallets/h (17 wraps, H 1,600 mm), 70 pallets/h (19 wraps, H 2,000 mm) - Pallet size: 800 x 1,200 mm - Load height: 1,000 - 2,000 mm (incl. pallet) - Load weight: 100 - 1,200 kg - Conveyor height: approx. 550 mm; speed 15 m/min - Machine height: approx. 4,862 mm; hall height from 7,000 mm - Pre-stretch: SCV-B carriage, electronically adjustable 150 - 400 % - Stretch film: LDPE / LLDPE, 17 - 23 µm, roll width 500 mm, max. diameter 250 mm, core 76 mm, max. weight 20 kg - Control: Siemens SIMATIC S7-1200 PLC, Siemens TP700 7" colour touch panel - Wrapping programs: 15 (expandable to 64), 12 steps/recipe, 4 password-protected access levels - Power supply: 400 V / 50 Hz, TN-S, control voltage 24 VDC - Compressed air: 6 bar, dry, oil-free - Documentation and HMI languages: German / English Equipment - High-speed rotating ring: power transfer to the pre-stretch carriage via sliding contacts, Wi-Fi commands - Integrated roller conveyor with pneumatic pallet lifting station (SMC PL-D) - Automatic film clamping, cutting and wide-band sealing unit - Fixed vertical hold-down (top press unit) stabilises the load during wrapping - Roping device gathers the film web from below - Photocell for automatic pallet-height reading, plus a pre-scan photocell with 3,800 mm reflector mast - Inverter-controlled IE3 motors, SEW geared, IP55, FESTO pneumatic components, SICK photocells - Siemens Scalance S615 VPN / firewall router and Scalance XB005 Ethernet switch, TCP/IP link to up-/downstream machines - Safety: Reer Safegate SMPO 1803 light curtain, fenced enclosure, dynamic fall protection on the ring - Operator panel separate from the main switch cabinet, plus remote control unit with emergency stop - R-Connect remote monitoring hardware: cloud portal for production data and teleservice - TPM package (centralised lubrication points, maintenance intervals on display), integrated HMI troubleshooting - Complete documentation on USB stick and in print: operating / maintenance manual, wiring / pneumatic diagrams, spare parts catalogue, layout Condition Used - almost as new, no visible production wear. Still installed and under power; inspection in operation on request. Sold without warranty. Availability Fgsdpfx Alszzz R Debjg Immediately. Location: Germany. Handed over dismantled and packed (EXW).

Year of construction: 2012, condition: used, Empty weight: 8.500 kg Carrying capacity: 200 kg GVW: 8.700 kg Length: 30 cm Lifting capacity: 200 kg Serial number: 162 Machining center comprising: - A 2012 OKK VC-X350 CNC lathe - A Fanuc M-20iA robotic tool changer Technical specifications: - Axis travel: - X: 600 mm - Y: 430 mm - Z: 460 mm - A: -120° to +30° - C: 360° - Table-to-spindle nose distance: 70 mm – 530 mm - Table working surface: 350 mm - Table load capacity: 200 kg - Feed rate: - X/Y: 50 m/min Fgodpezvcckofx Albog - Z: 36 m/min - Cutting feed (X/Y/Z): 36 m/min - Spindle: - Power: 50/30 HP - Spindle speed: 12,000 rpm - Taper type: BT40 - Tools: - Number of standard tools: 120 - Maximum tool weight: 7 kg - Maximum tool length: 300 mm - Maximum tool diameter: 82 mm / 125 mm without adjacent tool - Tool-to-tool change time: approximately 1.3 seconds - Machine weight: 8,500 kg - Approximate dimensions: L 1,895 mm x W 3,440 mm x H 3,000 mm - Machine controller: FANUC F31i-A5 Hours on the clock: approximately 5,540 h Sold with workbenches and cabinets, including contents Online auction held following the closure of the "Supadis" production facility in Le Plessis-Pâté (91), a company specializing in precision machining. This sale includes more than 100 lots, notably several 3-, 4-, and 5-axis CNC machining centers from “Matsuura,” “OKK,” “Biglia,” and “Nakamura Tome,” as well as a “Kasto Functional A” automatic saw. The lot also includes grinding machines, a “Cincinnati” column drill press, “Trimos” and “Mitutoyo” measuring columns, as well as numerous tools, workbenches, and inspection equipment. The sale also includes stocks of raw materials (steel, aluminum, titanium, “Inconel,” “PEEK,” copper, etc.), workshop equipment, compressors, shelving, and various material-handling equipment. Sale organized by Dome Auctions France, OVV No. 331-2026, auctioneer Blandine Camper. The online auction opens Tuesday 18 August and closes Thursday 24 September. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 22 September Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, Year of construction: 2005, total length: 3,600 mm, total width: 2,000 mm, total height: 2,200 mm, overall weight: 4,500 kg, VDF DUS 560 ti Year of manufacture: 2005 FORKARDT F+315 Previously used in the training department of a gear manufacturing plant. Fgjdezwbxyspfx Albog Was in production until approximately 3 months ago. I own this lathe from 2005, as well as a DUS 560 ti from 2004 with chip conveyor, and a DUS 400 ti from 2004. All three machines come from the same factory and were in use together until they were decommissioned in calendar week 34 of 2026. The purchase of all three machines is possible and will be offered with a discount. I also own several chucks for the FORKARDT centering chucks. Please contact me to discuss the possibility of purchasing one or more lathes, as well as accessories. Loading is included in the price. Transport in a closed Eurotrailer can be arranged.

Condition: used, Year of construction: 2021, Overview This Robopac Helix 4 EVO pallet winder was built in 2021, with less than 500 operating hours - technically close to new. The arm carries the pre-stretch carriage around the stationary pallet, so the load itself is never turned - the configuration for unstable, fragile or heavy loads at high output (capacity below). Built as a stand-alone unit. Fgodpszzz Rdofx Albog Technical data - Manufacturer: Robopac - Model: Helix 4 EVO - Year of manufacture: 2021 - Machine type: automatic rotating-arm stretch wrapper (pallet winder) - Operating hours: less than 500 h - Capacity: 82 pallets/h (11 wraps, 1,000 mm H), 73 (15 wraps, 1,600 mm H), 64 (19 wraps, 2,000 mm H) - Wrapping cycle time: approx. 36.3 s at H 1,600 mm, 15 wraps (conveyor excluded) - Pallet sizes: 800 x 1,200 mm and 800 x 600 mm, centred on the conveyor - Load height: 1,000 - 2,000 mm incl. pallet; mechanical max. 2,550 mm incl. pallet and conveyor - Load weight: 100 - 1,200 kg - Conveyor speed: 15 m/min - Machine height: 4,721 mm; hall height from 7,000 mm - Pre-stretch: PGSA carriage, electronically adjustable 100 - 400 % - Stretch film: LDPE / LLDPE, 17 - 23 µm, roll width 500 mm, max. dia. 250 mm, core 76 mm, max. weight 16 kg - Control: Siemens SIMATIC S7-1500 PLC, TP700 7" colour touch panel - Wrapping programs: 15, expandable to 64, 12 control steps per recipe, 4 password-protected access levels - Power supply: 400 V / 50 Hz, TN-S, control voltage 24 VDC - Compressed air: 6 bar, dry and oil-free - Documentation and HMI languages: German / English / Italian Equipment - Rotating arm on a four-column steel structure, geared slewing ring with central lubrication - Patented PGSA pre-stretch carriage with load cell, film tension corrected at the corners, set from the display - Automatic film clamping, cutting and impulse-sealing unit, spring gripper with 300 mm horizontal stroke - Easy Lock tilting roller and roping device for narrowing the film web from below - Pantograph top press unit for load stabilisation during wrapping - Photocell for automatic pallet-height reading - Integrated roller conveyor, pallets loaded and unloaded by forklift - SEW IP55 geared motors for arm rotation and carriage lift, FESTO pneumatic components - Glazed enclosure with Sick M4000 light curtains, 30 mm resolution, 1,800 mm field height - Enlarged illuminated switch cabinet and a separate, independent operator panel - TPM package: centralised lubrication points, gauges with red/green rings, maintenance intervals on the display - Troubleshooting in the HMI with fault location and remedy - R-Connect remote connectivity with cloud portal for production data and teleservice - Documentation printed and on USB: manual, CE declaration, diagrams, spare parts catalogue, layout Condition Used - virtually new, dismantled and professionally packed for transport; photographs show it assembled before dismantling. Sold without warranty. Availability Immediately. Location: Germany. Handed over dismantled and packed (EXW).

Condition: used, Empty weight: 12.500 kg Length: 62 cm Serial number: B151706 Machining center consisting of: - a NAKAMURA TOME CNC lathe, model: SUPER NTJ, manufactured in 2007 - a SAMSYS+ bar feeder, model: M3000 - a FANUC 18i-TB controller - Technical specifications: - Number of controlled axes: 9 axes - Number of simultaneously controlled axes: 4 - Maximum turning diameter: 190 mm - Maximum turning length: 620 mm - Bar capacity: 51 mm (R/L)/ 65 mm (Left) - Chuck: 210 mm - Spindle speed: 5,000 rpm (∅51)/ 4,500 rpm (∅65 mm) - Spindle nose: A2-5 (∅51) / A2-6 (∅65) - Spindle bore: 63 mm (∅51) / 80 mm (∅65) - C-axis: 0.001° - 600 rpm - B-axis: -91° to +91° - 180°/s - 2 turrets: 24 stations - 12 powered tools - Powered tool speed: 60 to 6,000 rpm - X1 travel: 345 mm - X2 travel: 167.5 mm - Z1 travel: 1,240 mm - Z2 travel: 685 mm - Y-axis travel: 45 mm - Feed rate: X1/X2 16 m/min - Z1/Z2 40 m/min - Machine weight: 12,500 kg - Approximate dimensions: L 3,660 mm x W 2,320 mm x H 2,170 mm Hours on the counter: approximately 2,960 hours of use Online auction held following the closure of the "Supadis" production facility in Le Plessis-Pâté (91), a company specializing in precision machining. This sale includes more than 100 lots, notably several 3-, 4-, and 5-axis CNC machining centers from “Matsuura,” “OKK,” “Biglia,” and “Nakamura Tome,” as well as a “Kasto Functional A” automatic saw. The lot also includes grinding machines, a “Cincinnati” column drill press, “Trimos” and “Mitutoyo” measuring columns, as well as numerous tools, workbenches, and inspection equipment. The sale also includes stocks of raw materials (steel, aluminum, titanium, “Inconel,” “PEEK,” copper, etc.), workshop equipment, compressors, shelving, and various material-handling equipment. Sale organized by Dome Auctions France, OVV No. 331-2026, auctioneer Blandine Camper. The online auction opens Tuesday 18 August and closes Thursday 24 September. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 22 September Fgsdpezvccqofx Albog Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and...

Condition: good (used), Total contents of recently closed ice cream factory - the UK's oldest ice cream company Parravani's. Fgedpfexm S Nhox Albeg

Condition: like new (used), FISHBAM Double-Door Static Autoclave / Cooker – 4 Cages FISHBAM double-door static autoclave / cooker with a capacity of 4 cages, designed for the cooking, pasteurization, and heat treatment of food products in industrial batch processes. Its double-door configuration allows for loading from one end and unloading from the opposite end, facilitating the organization of the production flow and its integration into facilities with separation between entry and exit zones. The equipment features a large-capacity horizontal chamber, industrial-grade construction in stainless steel, and an automatic system for controlling process parameters. MAIN FEATURES -Manufacturer: FISHBAM -Type: Industrial static autoclave / cooker -Capacity: 4 cages -Configuration: double door -Static operation -Batch heat treatment -Horizontal chamber -Stainless steel construction -Large-diameter doors -Mechanical safety locking system -Automatic process control -Integrated control panel -Pressure indicators -Process piping and valve system -Designed for industrial operation -Integrable into cooking and heat treatment lines PROCESS The 4-cage FISHBAM is designed to perform controlled heat treatments on food products. The loaded cages are placed inside the chamber, and once closed, the programmed cycle is executed, controlling the different phases of the treatment. Depending on the application and equipment configuration, it can be used for cooking, pasteurization, and other batch heat treatment operations. The double-door configuration allows for establishing a continuous workflow, with loading and unloading from opposite sides of the equipment. It can be integrated with: Cage loading and unloading systems Cage conveyors Fedpfx Ajyufk Nelbjgg Transfer systems Cooking lines Cooling systems Product handling equipment Complete food processing lines APPLICATIONS Especially suitable for canning industries, fish and seafood processors, meat products, vegetables, ready meals, and other food industries that require industrial batch heat treatment processes. The combination of 4 cages, static operation, and a double door provides a particularly interesting solution for facilities that need high processing capacity and an organized flow between the loading and unloading areas. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), Kmmaculate tear top pouch filler sealer for retortable pouches. Direct from recently closed Babyfoods factory. All other machinery from this facility is also available. Fsdpfx Ajy Iuu Eolbogg

Condition: used, Year of construction: 2004, total length: 4,200 mm, total width: 2,000 mm, total height: 2,200 mm, overall weight: 4,500 kg, VDF DUS 560 ti With chip conveyor Year of manufacture: 2004 FORKARDT F+315 Fsdpfx Ajzwbx Telbogg Previously used in the training department of a gear manufacturing plant. Was in production until approximately 3 months ago. I own this 2004 lathe with chip conveyor, as well as a DUS 560 ti from 2005 and a DUS 400 ti from 2004. All three machines originate from the same factory and were used together until they were decommissioned in calendar week 34 of 2026. The purchase of all three machines is possible and will be offered with a discount. I also have some collet chucks for the FORKARDT centering chucks. Please contact me to discuss the possibility of purchasing one or more lathes, as well as accessories. Loading is included in the price. Transport in a closed Eurotrailer can be arranged.

Year of construction: 2014, condition: used, Empty weight: 4 kg Length: 78 cm Serial number: 22220 V251403 5-axis machining center comprising: - a NAKAMURA lathe, TYPE: NTMX, year: 2014, 5-axis dual-spindle + milling head. - a SAMSYS+ bar feeder, Model: M3000, year: 2014 - an LNS YOSHIDA chip conveyor Technical specifications: - capacity: - max turning diameter: 200 mm - Max turning length: 780 mm - Distance between centers: max 980 mm / min 210 mm - Bar capacity: 51 mm on both left and right - Chuck size: 165 or 210 mm - Axis travel: Fgsdpfxszvccdj Albeg - X1/X2 slide travel: 570 mm / 130.5 mm - Z1/Z2/B2 slide travel: 1,297/658/770 mm - Y-axis travel: ±100 - Left/right spindle: - Speed: 5,000 rpm - Tool spindle: - Speed: 12,000 rpm - Tool type: CAPTO C4 - Number of tools in magazine: 24 - Max. tool diameter: 60 mm - Max. tool length: 180 mm - Max. tool weight: 4 kg - Indexing range: 190° - Turret: - Type: 12-sided drum turret - Number of indexing positions: 24 - Square tool size: 20 mm - Round tool size: 20 mm diameter - Spindle speed: 6,000 min⁻¹ - Floor dimensions: L 4,225 mm x W 3,015 mm x H 2,650 mm - Approximate machine weight: 14,500 kg Hours on the counter: approximately 3,622 h Sold with 1 cabinet and 2 workbenches, including contents Online auction held following the closure of the "Supadis" production facility in Le Plessis-Pâté (91), a company specializing in precision machining. This sale includes more than 100 lots, notably several 3-, 4-, and 5-axis CNC machining centers from “Matsuura,” “OKK,” “Biglia,” and “Nakamura Tome,” as well as a “Kasto Functional A” automatic saw. The lot also includes grinding machines, a “Cincinnati” column drill press, “Trimos” and “Mitutoyo” measuring columns, as well as numerous tools, workbenches, and inspection equipment. The sale also includes stocks of raw materials (steel, aluminum, titanium, “Inconel,” “PEEK,” copper, etc.), workshop equipment, compressors, shelving, and various material-handling equipment. Sale organized by Dome Auctions France, OVV No. 331-2026, auctioneer Blandine Camper. The online auction opens Tuesday 18 August and closes Thursday 24 September. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 22 September Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online...

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, FLOW & THERMAL Regenerative Thermal Oxidizer (RTO), 18,000 Nm³/h (2021) Complete industrial system for the treatment of process water containing Volatile Organic Compounds (VOCs), consisting of stripping columns and a three-chamber Regenerative Thermal Oxidizer. Manufactured by Flow & Thermal Solutions / TECAM in 2021, the equipment was installed at a PET production plant and remained operational until the factory closed on 27 November 2025. The system removes VOCs from the water by means of air stripping and subsequently destroys them in the RTO through high-temperature thermal oxidation. Heat recovery through ceramic media helps reduce natural gas consumption. Main features • Manufacturer: Flow & Thermal Solutions / TECAM • Year: 2021 • Serial number: F002 • RTO nominal capacity: 18,000 Nm³/h • Configuration: three-chamber regenerative RTO • Fuel: natural gas • Honeywell / Eclipse TJ 200 burner • Burner output: 58–586 kW • Electrical supply: 400 V, 50 Hz • Electrical power stated on the nameplate: 40 kW • 30 kW Soler & Palau ATEX main fan • Siemens PLC automation with HMI touchscreen • LEL monitoring, purge, dilution, bypass and pneumatic valve systems • Vertical stack: 10 m high, diameter: 800 mm • CE marked Performance and operation The equipment operated at actual flow rates close to its nominal capacity, with recorded values ranging from approximately 16,400 to 17,900 Nm³/h. The latest available emissions test, carried out by DEKRA in December 2023, recorded the following values: • TOC: 13 mgC/Nm³ • NOx: 3–4 mg/Nm³ • CO: 125–153 mg/Nm³ During the tests, the equipment operated at an approximate temperature of 775–780 °C, with a treated water flow rate of 3.5 m³/h. Stripping columns The system includes: • Original stripping column, designed for approximately 6 m³/h. • Second Tecnium SLFKK9 stripping column, manufactured in PPH, with a nominal capacity of 8 m³/h and a maximum capacity of 10 m³/h. The second column was installed, but it is currently dismantled and lying on the ground after being knocked down by strong winds during the winter. It has a hole in the base which, according to the available information, is considered potentially repairable. The Tecnium column is equipped with internal packing, distributors, a mist eliminator, connections, drainage and provisions for integration with the existing control system. Condition and maintenance The system remained operational until the final closure of the plant in November 2025. The latest preventive maintenance was carried out by TECAM in June 2025 and included mechanical and electrical inspection, burner, fans, stripping columns, instrumentation, valves and functional testing. The equipment was operational, although maintenance work is required before recommissioning, mainly involving: • Process valves • Internal insulation of the towers • Ductwork and seals • Main fan impeller and expansion joints • Repair of the base of the second stripping column TECAM technical documentation is available regarding the recommended works, and several spare parts are also available. Scope of supply The system includes: • Three-chamber RTO • Combustion chamber • Burner and gas train • Main fan • Two stripping columns • Dilution and purge system • Hot bypass • LEL analysers Fgedpfx Aszvcknslbeg • Stack • Ductwork • Electrical cabinets and controls • Platforms, ladders and support structures • Available spare parts

Year of construction: 2011, condition: used, Empty weight: 15.800 kg Dimensions (LxBxH): 707 x 385 x 245 cm Serial number: DAAO-01061 Type: automatic die-cutting and creasing machine with discharge unit – barely used Maximum dimensions: 750 × 1,050 mm (B1 size) Minimum dimensions: approximately 350 × 400 mm Speed: up to approximately 7,500 sheets/hour Die-cutting force: up to 300 metric tons (3.0 MN) Material: paper starting at approx. 80 g/m² Solid board up to approx. 1,400 g/m² Corrugated board up to approx. 4 mm thick Quicklock frames for stripping Length: 7,070 mm Width: 3,850 mm, including walkway Height: 2,450 mm Weight: approx. 15,800 kg Required floor space: approx. 47 m² Online auction of high-quality printing, finishing, bookbinding, and paper-processing machinery from a modern graphic arts production environment, including a HEIDELBERG Varimatrix 105 CS automatic die-cutting and embossing machine, a HEIDELBERG Speedmaster SM 52-5 Anicolor 5-color offset press, a BOBST BRAUSSE Bora 1050 E die-cutting machine with stripping function, 2 HEIDELBERG Stitchmaster ST450 professional brochure production lines, a HORIZON StitchLiner 6000 fully automatic saddle-stitching line, HEIDELBERG Stahl TH 66 / TH 82 and XT 94 folding machines, a MÜLLER MARTINI Bolero automated high-speed line for collating and perfect binding with PUR and hot melt, POLAR 137 XT PACE and POLAR 137 XT AT XT Plus Autotrim fully automatic cutting lines, POLAR 115 XT and 92 ED cutting machines, AGFA Avalon CTP plate setters, MÜLLER MARTINI 1571 automated collator, PALAMIDES Delta 703 bundling and strapping machines, NEOPOST DS600i inserter, the EPSON Super Color T5200 large-format printer, the TECNOMAC Evolution 76 B1 laminator, the HEIDELBERG GTO 52 with Alcolor, various HEIDELBERG sheetfed presses, stack lifts, accessories, and graphic peripherals, etc. The online auction opens Friday 14 August and closes Thursday 17 September. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing days are on: - Thursday 3 September - Thursday 10 September - Monday 14 September Fgsdozuw Hzspfx Albeg Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, functionality: fully functional, machine/vehicle number: SG74S34001, Year of construction: 2017, operating hours: 7,431 h, total length: 2,210 mm, total height: 1,448 mm, total width: 1,238 mm, type of input current: three-phase, input voltage: 400 V, input current: 30 A, HP MULTI JET FUSION 4200 ADDITIVE MANUFACTURING SYSTEM Located in ALBACETE, SPAIN 7,431 print hours · 2 build units · Tested and functional From a professional service bureau that has now closed. Series production of end-use parts in PA12 nylon. === THE SYSTEM INCLUDES === HP Jet Fusion 3D 4200 printer — S/N SG74S34001, P/N M0P44B, built 04/05/2017 HP Jet Fusion 3D Processing Station (powder processing) Build unit 1 — S/N SG74C35005, P/N M0P45B, built 04/05/2017 Build unit 2 — S/N SG74R35003, P/N M0P45B, built 27/04/2017 Extraction system and external powder collection container HP 3D High Reusability PA12 powder in stock, part factory sealed === ACTUAL USAGE DATA === Read directly from the machine's Printer Information screen: Print time: 445,886 minutes, approx. 7,431 hours Jobs: 718 total, 590 completed successfully Layers printed: 2,800,493 Volume printed: 1,308 litres Fusing lamp calibration: valid Material run: HP 3D High Reusability PA12 Last job on record: 1 July 2025 === SERVICE POSITION === The HP service contract has EXPIRED. The buyer will need to arrange service and, where HP requires it, recertification on relocation or change of ownership. That cost is not included in our price and is worth budgeting for. The machine has been standing since July 2025. We cannot warrant printhead condition after that time; it would be sensible to plan on replacing them. The agent cartridges are effectively empty (0.2 cc fusing, 0.2 cc detailing). The intermediate tanks hold approx. 1,470 cc and 1,142 cc. HP discontinued this model in October 2024, with supplies and support committed through October 2029. The price reflects this position. === TECHNICAL DATA === Manufacturer: HP Model: Jet Fusion 3D 4200 Year: 2017 Technology: Multi Jet Fusion (MJF), powder bed Printer supply: 9 kW, 220-240 / 380-415 V, 30 A, 3W+N+PE Build unit supply: 3 kW, 200-240 V, 16 A, single phase Approvals: UL E165854, CE, FCC Part 15, EAC Printer dimensions: 2,210 × 1,238 × 1,448 mm Fgjdpfx Alsy U H Idebjg === APPLICATIONS === Series production of end-use parts, short and medium runs, functional prototyping, automotive, consumer goods and tooling. High Reusability PA12 allows unfused powder to be recycled between jobs. === TERMS === Location: Albacete, Spain · Availability: immediate Inspection: by appointment Sale: EXW Albacete. The buyer arranges freight and customs; we handle loading, machine documentation and export paperwork at this end. Delivered: we can quote delivered if preferred. Reference: LOTE2-HP Serial numbers, plate photographs and the Printer Information screen are available in the attached documents.

Year of construction: 2012, condition: used, Empty weight: 9.250 kg Width: 18 cm Serial number: GS0000985 CP2000 Anicolor Damping Complies with the CE standard: yes Maximum sheet size: 370 × 520 mm Maximum print size: approximately 360 × 520 mm. Maximum production speed: approximately 15,000 sheets per hour. Paper thickness: approx. 0.03–0.40 mm Dimensions: Length: 5.5 meters Width: 1.85 meters Height: 1.62 meters Weight: approx. 9,250 kg Includes operator console Note: The machine was delivered with a maintenance contract Fgodpfjzuw Huex Albog Online auction of high-quality printing, finishing, bookbinding, and paper-processing machinery from a modern graphic arts production environment, including a HEIDELBERG Varimatrix 105 CS automatic die-cutting and embossing machine, a HEIDELBERG Speedmaster SM 52-5 Anicolor 5-color offset press, a BOBST BRAUSSE Bora 1050 E die-cutting machine with stripping function, 2 HEIDELBERG Stitchmaster ST450 professional brochure production lines, a HORIZON StitchLiner 6000 fully automatic saddle-stitching line, HEIDELBERG Stahl TH 66 / TH 82 and XT 94 folding machines, a MÜLLER MARTINI Bolero automated high-speed line for collating and perfect binding with PUR and hot melt, POLAR 137 XT PACE and POLAR 137 XT AT XT Plus Autotrim fully automatic cutting lines, POLAR 115 XT and 92 ED cutting machines, AGFA Avalon CTP plate setters, MÜLLER MARTINI 1571 automated collator, PALAMIDES Delta 703 bundling and strapping machines, NEOPOST DS600i inserter, the EPSON Super Color T5200 large-format printer, the TECNOMAC Evolution 76 B1 laminator, the HEIDELBERG GTO 52 with Alcolor, various HEIDELBERG sheetfed presses, stack lifts, accessories, and graphic peripherals, etc. The online auction opens Friday 14 August and closes Thursday 17 September. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing days are on: - Thursday 3 September - Thursday 10 September - Monday 14 September Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 2D3BF00270, power of the servo motor: 550 W, input voltage: 230 V, clearance between the columns: 262 mm, type of input current: AC, throat depth: 130 mm, pneumatic connection: 6 bar, This premium lot consists of four JUKI DLN-5410 series industrial needle-feed lockstitch sewing machines, removed directly from the professional production lines of the former MASI JEANS factory in Estonia. The JUKI DLN-5410N-7 is one of the world's most respected industrial needle-feed lockstitch sewing machines, renowned for its exceptional reliability, high sewing speeds and outstanding stitch quality. Its needle-feed mechanism synchronizes the movement of the needle with the feed dog, significantly reducing material slippage, seam puckering and ply shifting compared to conventional drop-feed machines. Ideal for denim manufacturing, workwear, uniforms, technical garments and other medium-weight industrial sewing applications. Bundle Contents Machine 1 Model: JUKI DLN-5410N-7 Year: 2009 Internal Reference: 23A-7222 Manufacturing Number: 2D3BE00023 Machine 2 Model: JUKI DLN-5410N-7 Year: 1999 Internal Reference: 26A-7003 Manufacturing Number: 2D3BF00270 Machine 3 Model: JUKI DLN-5410N-7 Year: 2009 Internal Reference: 27A-7226 Manufacturing Number: 2D3BE00024 Machine 4 Model: JUKI DLN-5410-7 Year: 2009 Internal Reference: 17B-7224 Fsdpfx Aszmy Acolbogg Manufacturing Number: DLNAJ38908 Technical Specifications Manufacturer: JUKI Corporation Model Series: DLN-5410N-7 (3 machines) / DLN-5410-7 (1 machine) Machine Type: Industrial Single Needle Needle Feed Lockstitch Sewing Machine Country of Manufacture: Japan Maximum Sewing Speed: Up to 5,000 stitches per minute Maximum Stitch Length: 4.0 mm Needle System: DB×1 Presser Foot Lift: 5.5 mm by hand / 13 mm by knee lifter Feed Mechanism: Needle Feed with Bottom Feed Lubrication System: Fully Automatic Centralized Lubrication Integrated Electronic Control System Automatic Thread Trimmer Automatic Backtacking Automatic Needle Positioning Industrial Sewing Table and Heavy-Duty Steel Stand Production Benefits • Needle-feed system minimizes material slippage and seam distortion • Excellent stitch quality on multi-layer fabrics • Consistent seam appearance at high sewing speeds • High productivity in continuous industrial operation • Reliable Japanese engineering • Proven long-term durability in professional garment manufacturing Why Purchase This Lot • Four matching production machines from the same factory • All machines used on the same production line • Consistent sewing quality across all workstations • Common spare parts inventory • Simplified maintenance procedures • Reduced operator training requirements • Cost-effective way to establish or expand a production line Applications • Denim manufacturing • Jeans production • Workwear • Uniform production • Technical garments • Medium-weight woven fabrics • Shirt manufacturing • Industrial garment production Condition Previously used in professional garment production. All machines remained in operation until the recent closure of the MASI JEANS factory. Good overall industrial condition with normal cosmetic wear consistent with factory use. Available for inspection before dismantling. Location Valga, Estonia Dismantling & Transport Buyer is responsible for dismantling, loading and transportation. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation. The machines are offered primarily as one complete factory-matched production set. Individual sales may be considered subject to the prior sale status of the complete lot.

Year of construction: 1968, condition: used, functionality: fully functional, machine/vehicle number: 2276, Karl Klink HW 20 Reaming Machine For sale is a functional Karl Klink HW 20 reaming machine. This machine comes from the renowned Karl Klink tool machine factory and was used in industrial applications until recently. It is suitable for precise reaming operations in single-part and series production. Technical Data Manufacturer: Karl Klink Tool Machine Factory Model: HW 20 Machine Type: Reaming Machine Year of Manufacture: 1968 Weight: approx. 5,500 kg Connected Load: approx. 19 kVA Condition Fully functional Used Inspection possible by appointment Fjdpozvf Trjfx Albogg Sale due to changes in equipment Delivery FCA location Dismantling and transport by the buyer Overhead crane and forklift can be made available for loading upon agreement.

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 4DOUG52347, power of the servo motor: 550 W, input voltage: 230 V, clearance between the columns: 261 mm, type of input current: AC, throat depth: 130 mm, pneumatic connection: 6 bar, Professional Production Set of Six JUKI Industrial Sewing Machines from the MASI JEANS Factory This lot consists of six JUKI DDL Series industrial single-needle lockstitch sewing machines, removed directly from the production lines of the former MASI JEANS factory in Estonia. The JUKI DDL-8500 and DDL-8700 Series are among the world's most widely used industrial sewing machines, renowned for their reliability, smooth operation and consistent stitch quality. Designed for continuous production environments, they are an excellent choice for garment manufacturers seeking dependable, high-speed sewing equipment. Because all machines operated in the same factory, this matched production set offers consistent performance, common spare parts, simplified maintenance and identical operating principles, making it ideal for expanding an existing production line or establishing a new sewing department. Bundle Contents Machine 1 Model: JUKI DDL-8700-7 Internal Reference: 6A Machine 2 Model: JUKI DDL-8700-7 Internal Reference: 109A-7078 Machine 3 Model: JUKI DDL-8500 Year: 2002 Internal Reference: 113A-7101 Machine 4 Model: JUKI DDL-8500-7 Year: 2001 Internal Reference: 26B-7049 Machine 5 Model: JUKI DDL-8700-7 Internal Reference: 27B-7088 Machine 6 Model: JUKI DDL-8700-7 Year: 2002 Internal Reference: 28B-7090 Technical Specifications Manufacturer: JUKI Corporation Model Series: DDL-8500 / DDL-8700 Machine Type: Industrial Single-Needle Lockstitch Sewing Machine Country of Manufacture: Japan Maximum Sewing Speed: Up to 5,000 stitches per minute Fully Automatic Lubrication System Complete Industrial Workstations Heavy-Duty Steel Stands Five machines equipped with the JUKI "-7" electronic automation package featuring: • Automatic Thread Trimming • Automatic Backtacking • Automatic Needle Positioning Key Features • Factory-matched production set • Six professional JUKI industrial sewing machines • High-speed, reliable industrial performance • Excellent stitch quality for continuous production • Common spare parts and maintenance procedures • Complete workstations ready for installation • Proven Japanese engineering Applications • General garment manufacturing • Denim and jeans production • Workwear and uniforms • Shirts and sportswear Fedjznlbyepfx Albegg • Medium-weight woven fabrics • Industrial apparel manufacturing Condition Previously used in professional garment production. All machines remained operational until the scheduled closure of the MASI JEANS factory. Good overall industrial condition with normal cosmetic wear consistent with factory use. Available for inspection before dismantling. Location Valga, Estonia Dismantling & Transport Buyer is responsible for dismantling, loading, transportation, and all associated costs. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation. The machines are offered primarily as one complete factory-matched production set. Individual sales may be considered subject to the prior sale status of the complete lot.

Condition: used, functionality: fully functional, Foundry factory for sale, Property includes 15 buildings, 6 hectares of land. Located at the Karhula industrial site next to the city of Kotka in southeastern Finland, Karhulan Valimo was founded in the 1880’s. In 1902, the foundry was merged with a wood grindery, glass factory, brick factory and engineering works to form the Karhula Oy. In 1915 the Karhula Factories were sold to Ahlström Corporation. The current Foundry was built in 1960 and in 2000 Ahlström sold the foundry to Sulzer Pumps Finland. In 2016 Sulzer Pumps decided to close the foundry and it was sold to Karhulan Foundry Oy, which was unfortunately declared bankrupt in March 2021. Throughout its history, the foundry has been known of been able to produce highly demanding castings particularly in high alloyed steels. In 2022 Karhu Assets Oy bought the facilities and machinery of the foundry. Most of the equipment in the fettling shop has already been sold, while most of the machinery in the moulding department and meltshop are intact and available. All heat treatment furnaces, a total of 10 units, are in place and available for sale. Welcome to visit on the site! The equipment is located in Kotka, 48600, Finland, and is sold EXW Kotka in its current condition. The flight time from most European cities to Helsinki, Finland, is approximately 2 hours, and the drive from Helsinki to Kotka via the motorway is about 120 km (1 hour). You are welcome to visit us in person to inspect the foundry machinery! Second-Hand Condition: All machines, equipment, and articles are sold in a used condition. No Warranty, Exchange, or Guarantee: The seller does not offer any warranties or guarantees on the items sold. There is no option for exchange or refund, so the buyer accepts any risks associated with the purchase. Fgjdpfx Aljuxmt Tebsg As Inspected On Site: The buyer must inspect the goods on-site before making the purchase, as the sale is final once inspected. The seller will not be held responsible for any defects found after the purchase.

Condition: used, functionality: limited functionality, Year of construction: 2013, operating hours: 5,400 h, Stratasys Objet Connex 500 industrial multi-material PolyJet 3D printer available for sale in the UK. The machine has approximately 5,400 operating hours and powers up successfully. When inspected, the machine was not displaying print-head errors. The printer has not recently completed a test print because the printing materials/resins currently installed have expired. We are therefore selling the machine transparently as requiring recommissioning and fresh materials before full production operation can be confirmed. The Connex 500 is an industrial PolyJet additive manufacturing system designed for professional prototyping and multi-material applications. Its large build platform and ability to work with different material characteristics made the Connex range particularly suited to engineering, product development and prototype production. Fgjdezy Rwqjpfx Albeg The machine was removed from a commercial environment and is now surplus to requirements. Known condition: Powers up successfully Approximately 5,400 operating hours No print-head errors observed during inspection Existing resin/material is expired Full print cycle has not been tested with fresh material Offered in its present condition Inspection welcomed prior to purchase This could represent a good opportunity for an existing Stratasys/Objet user, specialist reseller or refurbishment company familiar with the Connex platform. The machine is located in the United Kingdom. Further photographs and a video showing the machine powered on can be supplied on request.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, total length: 1,800 mm, total width: 1,000 mm, total height: 1,250 mm, type of input current: three-phase, grinding belt length: 2,580 mm, grinding belt width: 150 mm, extraction connection diameter: 100 mm, VOLPATO LVO 120 Edge Sander Specification: • Condition – used, after inspection/service • Manufacturer – VOLPATO • Model – LVO 120 • Working height – 120 mm • Sanding belt dimensions – 150 x 2580 mm • Additional shaft, roller for sanding internal radii • One worktable adjustable at any angle from 0 to 90 degrees • Motor power – 2.2 kW • Mechanical belt tensioning and oscillation • Angle grinding attachment, angle gauge included • Extraction port – diameter 100 mm • Weight – 250 kg Fgsdpfx Aljxuvgyebog • Year of manufacture – 2010 • Machine documentation in Italian • Overall dimensions: 180 x 100 x 125 cm (L x W x H) Additional information: • Very good, factory technical and visual condition • The photos shown reflect the actual item being sold • Possibility to connect and test the machine on site

Condition: excellent (used), Year of construction: 2021, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: 2021-1504-QN, High-end metal separator for inspecting bulk materials in free fall Material: stainless steel 304 Surface: sandblasted Sensing tube material: PE, anti-static, food grade Rejector: single flap type RH Protection rating: IP66 Electronics assembly: detached Control electronics cable length: 3 m Nominal width: 150 mm Orientation: vertical, top to bottom Power supply: 100-240VAC 50-60Hz LNPE - Without power cable Pressurized air supply: 6-10 bar Fgsdszvwlmjpfx Albjg Expected sensitivity: FE: 0.4 mm NE / Al: approx. 0.4 to 0.56 mm Stainless steel: approx. 0.4 to 0.72 mm Electronics outside ATEX Zone Inside: Zone 20 within metal separator (pipe) = II 1 D Ex h IIIC T135°C Da Outside: Zone 22 surrounding metal separator = II 3 D Ex tc IIIC T135°C Dc IP65 QUICKTRON 07 RH metal separators are used for inspecting powders and granules in free-fall lines. They are available in nominal widths up to 300 mm and can therefore cover all application areas, from the laboratory to truck loading. Their hygienic design and easy cleaning prevent cross-contamination between product batches. Depending on the requirements, they can increase process safety or fulfill the task of outgoing goods inspection. Mesutronic metal detectors use state-of-the-art technology to protect your production, your reputation, and your customers from damage caused by metallic foreign objects. Digital signal processing, combined with innovative evaluation methods, comprehensive self-monitoring, and ease of operation, ensure the optimal function of the system and the successful completion of all types of audits. The devices are complemented by an extensive range of accessories and variants, from multi-frequency technologies to test bodies and material certificates. The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or in the production plant in Europe. The details for optimal transport need to be clarified. The machine price does not include packaging.

Condition: good (used), Year of construction: 1992, functionality: fully functional, workpiece length (max.): 3,200 mm, workpiece width (max.): 1,200 mm, workpiece height (max.): 80 mm, Equipment: documentation/manual, CNC milling machine Rover 342 with 1 milling motor, saw blade, and cross-drilling attachments is fully functional but has been disassembled by the seller from a closed-down factory. Fodpfjzl Uayjx Albogg