Used Rema 3 To for sale (68,820)

Condition: good (used), functionality: fully functional, load capacity: 3,000 kg, Equipment: foot remote control, Sideros Rotolift with 3000 kg load capacity Technically sound, operates flawlessly Dimensions: Horizontal height min. 0.72 m, horizontal height max. 1.59 m Vertical height min. 0.74 m, vertical height max. 1.54 m Length 2.5 m, width 1.0 m Diameter 1.25 m Kdodpfjy Hl A Rex Ahbju

Condition: used, Year of construction: 2017, functionality: limited functionality, machine/vehicle number: 58517824, overall weight: 10,000 kg, inner dimension height: 2,370 mm, inner dimension length: 12,200 mm, inner dimension width: 3,000 mm, total length: 13,075 mm, total width: 3,410 mm, total height: 3,470 mm, type of input current: AC, conveyor belt width: 3,000 mm, conveyor belt speed: 15 mm/s, axle spacing: 12,500 mm, Technical details: Kdedpfx Aezvbldehbou Chain: Full pin chain with idler roller, DIN 8167, M112 (breaking force 160 kN), pitch 160 mm Drive: Flat gearbox motor, FR left, SEW FA127/G R77 DRN90S4/TF, 230 / 400 V, 50 Hz, IP 54, IE3, ISO B, 1.10 kW, 0.91 rpm, design M1, mounting height 100 mm Construction: Edge profile 5 mm Belt quality: EP 400 / 3, cover 4:2, oil and grease resistant, both sides with edge-flush T-cleats 20 mm, 26,000 mm endless The conveyor belt has been out of operation since approximately early 2020. The system has been partially dismantled; Figure 1 shows an identical system, which could also be inspected while in operation. The drive motor (1.1 kW) is not available. The steel substructure is only partially present.

Condition: used, functionality: fully functional, Year of construction: 2005, type of cooling: water, overall weight: 15,000 kg, total length: 10,000 mm, total width: 4,000 mm, total height: 25,000 mm, year of last overhaul: 2024, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, safety light barrier, ITEC AG laser cutting system for circuit boards. The system consists of the following components: ITEC AG cell with granite bed, 3-axis Motoman NX 100 robot, vacuum manipulator RIEDEL L 21/8 TR 3.00 cooling system GSW Schwabe AG straightening machine MHR 2.5mm / 1250mm / 7 rollers GSW Schwabe AG coil handling system VRMA 80/76 The circuit boards are fed from the coil (GSW Schwabe AG, MHR 2.5/1250, general overhaul in 2022) into the straightening machine (GSW Schwabe AG, VRMA 80/76). The PDFs with technical data are attached. The laser portal for the TRUMPF TF is mounted on a solid granite bed, which guarantees absolute repeatability. The Motoman robot picks and places components using a vacuum manipulator and camera. Ksdpfx Aszyzzyohbsdu The system has been continuously maintained and is in production-ready condition. Before dismantling, the system was cleaned, and all liquids and coolants were evacuated.

Condition: used, machine/vehicle number: 007468, X axis working area: 3200 mm Y axis working area: 1300 mm Main Electrospindle power: 7.5 KW Number of controlled axes: 3 axes Kdode Aax Nfspfx Ahbeu Total number of drilling spindles: 36 Total number of tool changer positions: 10

Condition: new, Year of construction: 2026, Feed speed 9 m/min Board thickness 12 - 45 mm Minimum board dimensions (L x W) 90 x 170 mm Worktable height 960 mm Table extension (steady rest) 560 mm Extension connector ⌀ 125 mm Installed power 6.1 kW Pre-milling 3000 rpm Front/back 12,000 rpm Ksdpszp Nz Hofx Ahbsdu Top/bottom 12,000 rpm Polishing 3000 rpm Machine dimensions 3960 x 720 x 1748 mm Weight (net/gross) 800 / 950 kg Feed motor power 0.75 kW Glue tank heater motor power 1.315 kW Pre-milling motor power Milling 1.5 kW Plate heating motor power 0.125 kW Glue spindle motor power 0.25 kW Front/rear cutting motor power 0.37 kW Top/bottom cutting motor power 0.37 kW x2 Corner trimming motor power 0.37 kW Polisher motor power (top/bottom) 0.12 kW x2 (3-phase), 0.18 kW x2 (1-phase) Touchscreen control panel Air consumption 350 L/min Minimum extraction power 5 kW (for effective dust extraction from the edge bander)

Condition: used, Rema DMGB-35 double cross-cut saw, including an outfeed conveyor belt, for cross-cutting timber on both sides. This machine was specifically used for cutting doors to size. In its current condition, the cutting length is limited to 1,000 mm, but this can be extended. Kjdpfxszryuvs Ahbodu Technical data: - Belt length: approx. 1,700 mm + 2,700 mm - Cutting width: max. 2,500 mm - Cutting height: max. approx. 80 mm

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 09/2007, total length: 13,880 mm, total width: 2,550 mm, suspension: air, tire size: 385/65, tire condition: 40 %, wheelbase: 9,010 mm, color: other, Equipment: ABS, tail-lift, = Additional options and accessories = - Air Suspension - Drum brakes - Lift Axle - Steering Axle = More information = General information Year of construction: 2007 Registration number: OJ-40-ZV Axle configuration Tyre size: 385/65 Tyre profile: 40% Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Make axles: BPW Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 7.710 kg Carrying capacity: 34.290 kg GVW: 42.000 kg Functional Tail lift: D`Hollandia, tail lift Kdedsz Smzvspfx Ahbsu

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, load capacity: 3,000 kg, Protec KT 3000 HV, hydraulically height-adjustable Load 3000 KG Ksdpfx Ahsq U Ac Debsdu Hand-held remote control with digital display Double foot remote control Height approx. min. 700mm horizontal, height max. 1400mm Diameter of face plate 1400mm Angle of inclination min. 135° Speed 0.05 to 0.9 rpm Motor power 3 KW we have a huge selection of turntables in all sizes from 100 kg to 30 tons load capacity Used and new machines

Condition: used, Vertical machining center ideal for the production of kitchen doors, for pantographing, drilling, cutting and insertion of highly flexible hardware. Vertical machining allows this series of machines to be able to Kdsdpfxeux Si Ho Ahbou be flexible and productive at a very high quality level. In addition, the automatic loader and the automatic return / rotation of the panel make it completely automated. • TPA machine programming and control system with Windows based PC - Computer, keyboard and mouse - 15 "monitor - CD-ROM The production line consists of the following machines: 1. Motorized comb multi-position introduction transfer - Length 2000 mm 2. Vertical machining center Bremen Vektor - Automatic introduction by motorized chain and vertical pressure rollers for fixing the piece during the processing - Automatic working height adjustment by C.N. - N ° 1 horizontal drilling unit for the hole to insert the stop - N ° 1 drilling head with 7 horizontal spindles in X and 16 vertical spindles in Y - N ° 1 pantograph with automatic revolver tool change with 8 positions 3. Motorized panel handling / return transfer with 180 ° rotation and sliding on THK guides - Length 2500 mm 4. Vertical machining center Bremen Vektor - Automatic introduction by motorized chain and vertical pressure rollers for fixing the piece during the processing - Automatic working height adjustment by C.N. - N ° 5 storage tanks and introduction of hinges / bumpers / tie rods 6. Motorized transfer for the exit and movement of the panel from vertical to horizontal towards the operator - Length 2000 mm 7. Motorized belt transfer for panel return to the operator • Perimeter protection grids

Condition: excellent (used), Year of construction: 2010, Converging Solutions Converging Conveyor Model: Integrator 3 Syncro Kdjdev Tx Uzspfx Ahbsu Serial number: CS5653 Year of construction: 2010 230 V, 16 A Belt width: 680 mm and (6x) 320 mm Clearance: 680 mm x 190 mm Total dimensions: 2280 mm x 850 mm x 1240 mm.

Condition: new, Catalog number: RE066 TECHNICAL DATA - Blade diameter ⌀250 – 350/30 mm - Scoring blade diameter (operates only with the main blade ⌀300, 350 mm) ⌀120/20 mm - Main motor power 4 kW Kodjztncqjpfx Ahbjdu - Scoring motor power 0.75 kW - Rotational speed 4000 rpm - Scoring blade rotational speed 8800 rpm - Blade tilt 0 – 45° - Max. cutting length 3200 mm - Movable table stroke 3400 mm - Cutting width with rip fence 1250 mm - Sawtooth plate ⌀350 mm - Rip fence adjustable to angles of 90° – 45°, accuracy ±1° - Max. cutting height with ⌀300 mm blade 95 mm - Max. cutting height with ⌀350 mm blade 120 mm - Upper dust extraction port diameter ⌀80 mm - Lower dust extraction port diameter ⌀100 mm - Weight 650 kg ADVANTAGES – machine is new – CE certificate – warranty The 3200mm version is equipped with a hood and a 45° side guard. The saw does not include blades. Net price calculated according to the euro exchange rate (with larger exchange rate fluctuations, the price may change) Net price: 26000 PLN Net price: 6047 EUR, depending on the exchange rate of 4.30 EUR (Prices may change with larger fluctuations)

Condition: good (used), Year of construction: 2018, UV industrial super wide format digital printer for rigid media he Inca Onset X2 is a high-volume industrial UV flatbed inkjet printer designed for display graphics, POP/POS production, packaging, and specialty printing. Developed by Inca Digital Printers (later part of Agfa), the X2 is positioned as a production-class printer that combines high throughput with excellent image quality. The system is intended for medium-to-high production environments where productivity, automation, and reliability are critical. Printer is originally X3, but was converted to X2 (two channels of CMYK ) Manufacturing Year: 2018 Colour configuration: 2xCMYK RIP: not included Automation: 3/4 automated Productivity: up to 124 beds/hour Status: fully operational, 45 printheads out of 224 are required to have high quality on high speed (can be quoted). In production, fully operational demo possible Decommissioning, transport and installation available upon request. Kdsdpjzhv T Tofx Ahbju For further technical details, refer to enclosed data sheet.

Condition: used, maximum load weight: 32,040 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 08/2014, loading space length: 13,720 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 75 m³, total length: 13,950 mm, total width: 2,550 mm, total height: 3,600 mm, Year of construction: 2014, Equipment: ABS, * Orten SafeSerfer 2-in-1 * SafeSerfer sliding tarpaulin, left; curtainsider, right * DEKRA certified according to VDI 2700 and DIN EN 12642 Code XL * Beverage transport certificate * Draught beer transport certificate * Chemical transport certificate (IBC) * Waste paper transport certificate Kdjdszxkavjpfx Ahbeu * 1 row of cargo securing with 2 crossbars * 2,000 kg Bär load securing system * SAF axles * Lift axle * Edscha sliding roof * Rear view camera * Tie-down points in the outer frame

Condition: used, maximum load weight: 32,040 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 08/2014, loading space length: 13,720 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 75 m³, total length: 13,950 mm, total width: 2,550 mm, total height: 3,600 mm, Year of construction: 2014, Equipment: ABS, * Orten SafeSerfer 2-in-1 * SafeSerfer sliding tarpaulin, left; curtainsider, right * DEKRA certified according to VDI 2700 and DIN EN 12642 Code XL * Beverage transport certificate * Draught beer transport certificate * Chemical transport certificate (IBC) * Waste paper transport certificate * 1 row of cargo securing with 2 crossbars * 2,000 kg Bär load securing system * SAF axles * Lift axle Kdedpfx Aozxkbgshbou * Edscha sliding roof * Rear view camera * Tie-down points in the outer frame

Condition: used, Year of construction: 2019, Highly flexible vertical machining center for milling, drilling and cutting. The BREMA patent for processing vertically, allows this series of machines to be the most flexible and productive machine par excellence to a very high quality level. Furthermore, the automatic return / rotation system of the panel makes it fully automated. Possibility of working in height up to 1300 mm, working on all 6 sides of the panel. Working dimensions: * length 300 - 2500 mm * height 60 - 1300 mm * thickness 10 - 80 mm * max weight 50 kg Machine programming and control system with PC - TPA Albatros software. Programming editor with a high-level software interface allows you to program the machine easily and intuitively and also allows: * linear, circular and helical interpolation * double zero reading * mirror program management * optimizer for revolver tool diameter * optimizer for independent spindle diameter * DXF file conversion (geometric conversion) * import of work lists in ASCII format * extra key for programming from the office * gun barcode reader * 17” LCD monitor * Windows 7 professional operating system Panel introduction and handling by means of motorized vertical transfer with rollers and rubber-coated pressers for sealing of the panel during the workings, with a motorized carpet length of 2000 mm, with speed regulation electronically adjustable with converter. The photocells and the NC program guarantee the introduction of one or more panels in sequence using selector. Panel height reading system consisting of an independent axis able to read the panel height before getting into the car. Size reading tolerance +\- 0.15 mm. In case the tolerance is exceeded a message will inform the operator and the machine will stop the operation in progress. Panel thickness reading system using a mechanical feeler Horizontal vice - M.O. axis which allows the thickness of the workpiece to be established from the program. Vertical vice - M.V. axis which allows the program to establish the height dimension of the piece being processed. Chain - X axis - patent double section with laser photocells able to read the reference zero of the panel before carrying out the work. The double section allows you to carry out machining on the lower side of the panel thus having the possibility of work the panel on 6 sides. Brushless motors with programmable speed regulation by NC. Drilling unit with independent spindles 7 + 17 x 32 mm 24 independent spindles with 32 mm pitch arranged as follows: * 7 spindles aligned in X axis * 17 spindles aligned in Y axis Unit driven by a high-frequency motor that allows the rotation change of the spindles up to 7000 RPM The Brushless motor allows drilling depth control and forward speed control. Upper revolver milling group with 10 positions and tool change controlled by NC. 11 KW motor with direct transmission of movement to the tool up to 18000 RPM. The rotation of the revolver generated by controlled axis with Brushless motor allows quick tool change. Kdedpjl Ikzgefx Ahbou 10 aggregate heads included in the revolver Automatic lubrication 180° panel translation and rotation system Movement and rotation system of the panel arriving from the machine which allows unloading or rotation of the panel and the return to the machine for machining on both surf

Condition: used, Colour: Green Weight: 9.500 kg Price: On request Information Rexroth control for length and number Charging cradle for the reel Thickness min: 0,7-3,2mm. Working width: 1330mm. Decoiler: Metform 5ton. Centrediameter: 530-610mm. No of Straighteningrolls: 5pcs ø100mm. No of feerer rolls: 2pcs. ø100mm. Guilliotine: Morgan PG1500-3,2. Set-up: Length: 6500mm. Width: 3300mm. - Drive system: CNC Kedo Aa Ir Aopfx Ahbjdu - Drive type: Hydraulic - Max. sheet thickness [mm]: 3 - Max. working width [mm]: 1330 - Transport dimensions: 0mm x 0mm x 0mm (l x w x h) - Transport weight [kg]: 9500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Fortuna Semi-Automatic Bun Forming Machine, Model 3 30-division Dough weight range: 960-2100 g Kdsdpfx Aez A Sg Ajhbju Product weight range: 32-80 g Includes 3 forming plates (new) Optional: Base frame with fixed feet Base frame with castors (2 swivel castors with brakes + 2 fixed castors)

Condition: good (used), Lifting mast, forklift mast, forklift mast, lifting frame, rear forklift, clear view mast -Manufacturer: Linde, forklift mast, unobstructed view mast from front forklift type H30T -Load capacity: 3000 kg -Lifting height: approx. 3500 mm -Dimensions: see photos / technical drawing -Transport dimensions: 2500/1150/H330 mm -Weight: 725 kg Kdodpsykik Eofx Ahbju

Condition: reconditioned (used), Year of construction: 1998, machine overhauled, major overhaul - year of production 1998 TECHNICAL PARAMETERS: diameter of the main saw ⌀ 350 mm max. sawing height 70 mm max. sawing width 150 mm engine power 3 kW rotational speed of the spindle 4500 rpm diameter of spindle tip ⌀ 30 mm nominal pressure of compressed air 0,6 Mpa frequency of working cycles 0 - 28 cycles/min max. stroke of saw 100 mm connection diameter of suction nozzle 1 x ⌀ 125 mm air demand (in dust extraction system) 1300 m3/h height to table surface 850 mm weight 160 kg Kdodpfx Ast Dxwaohbju The DMDK-35 circular saw is used for transverse sawing of wood. The maximum cutting width is 220 mm with a height of 35 mm. The saw is controlled by a foot switch. The saw guard assembly is equipped with safety curtains. The material is pressed with two point presses. This is an efficient saw, it has an infinitely adjustable feed speed in the range of 0 -28 cycles/min. The saw is often used to manually cut out defects in the material. net price invoice va

Condition: good (used), pressing force: 200 t, ram plate length: 3,100 mm, HAMMERLE 200-ton 3m CNC Press Brake Kedez Iuaiepfx Ahbedu Press Brake, Edge Bending Machine Brand: HAMMERLE Pressing force: 200 tons Bending length: 3100 mm CNC control: CYBELEC DNC 90 Control axes: Y1, Y2, X, R, Z1, Z2, V, which means: Y1, Y2: left and right frame X: back gauge, front/rear R: upper/lower back gauge Z1, Z2: left/right finger V: table compensation Pneumatic supports for sheet metal to the back gauge Numerical and graphical 2D element drawing 1 set of tools included with the machine, plus all items visible in the photo in the toolbox Machine documentation: diagrams and operating instructions

Condition: excellent (used), Year of construction: 2023, OCE Canon Colorado 1630 upgraded to 1650 The Canon Colorado 1650 is a 64-inch industrial production roll-to-roll printer designed for high-volume sign, graphics, and wallcovering production. Built on Canon's UVgel technology, it balances fast print speeds with flexible ink formulation and automated media handling. Year: 2023 Colours configuration: 2 x CMYK Kdedpfx Ahez A A A Uebsu Mileage: 14.000m² ONLY!!! Upgrade: FLXfinish+ Option: While the 1630 can be upgraded to support basic matte/gloss finishes, the 1650 fully utilizes the FLXfinish+ system. This allows you to print a combination of matte and gloss finishes simultaneously in a single pass, without changing inks, changing varnish, or swapping media. Double-Sided Printing: Offers fully integrated support for seamless, automated double-sided printing (useful for indoor/outdoor blockout banners). Dual-Roll Feed: Unlocks automated roll-feeding and automated switching across 2 active media rolls smoothly, whereas the base 1630 comes standard with a single-roll configuration. For further technical details please refer to attached brochure. Printing & TechnologyPrinting Method: UVgel piezoelectric inkjet.Printheads: 8 x UVgel 415 printheads (2 independent printheads per CMYK color channel).Resolution: Up to 1,800 dpi print resolution.Nozzle Control: Integrated PAINT (Piezo Acoustic Integrated Nozzle Technology) which sends acoustic pulses to constantly monitor, diagnose, and recover clogged nozzles automatically on the fly.

Condition: good (used), Year of construction: 1990, pressing force: 3,000 t, Bending length: 14,000 mm Column width: 10,500 mm Control: CYBELECCNC 7000 with graphic Table width: 1,000 mm Distance between table and press beam: 1,800 mm Controlled axes: Y1; Y2; X1; X2 Control system was renewed in 2012 Total power requirement: 75 kW Machine weight approx. min.: 465 t Kjdpfe Aawtvox Ahbodu Space requirement approx.: 14,600 x 4,200 x 7,200 mm Additional information - Distance between table and press beam: 1,800 mm

Condition: excellent (used), C.N.C. WORKING CENTER 3 axes (X-Y-Z) Movable panel (workpiece), movable working head. Vertical position of the panel (workpiece) Numerical Control TPA - Software Albatros Safety cabin (enclosure) of the working head Panels feeding by motorized chain/track Rubber-coated vertical rollers as fence and feeders during workpieces process In-feeding table (with motorized belts) - Out-feeding table (with motorized belts) With workpiece return system to the operator (180°) Min. useful working area (X - Y - Z) mm 260 x 40 x 10 (ca.) Max. useful working area (X - Y - Z) mm infinite x 1300 x 80 (ca.) Kdsdpfx Ahoihfiisbeu Separate electric and command cabinet Total installed power (Kw) 35 WORKING GROUPS: Drilling heads with vertical spindles (No.) 1 Independent vertical boring spindles (No.) 24 (7 in X + 17 in Y) Drilling heads with horizontal spindles (No.) 2 Independent horizontal boring spindles (No.) 36 (9 LEFT + 9 RIGHT = 18 x 2) Drilling head motor-power (Kw) 3 x 3 (ca.) Vertical electro-spindle (No.) 1. Vertical electro-spindle motor power (Kw) 7,5 (ca.) Automatic Tools Changing System Revolver, with Tools storage plate (No. of folds-positions) 10

Condition: excellent (used), Flexible N.C. automatic line for drilling, routing and inserting (hardware). Numerical control with Albatros software. Consisting of: KZ2046) Infeeder with hedgehog (buffer) store (18 positions) Kodsidmkrjpfx Ahbjdu KZ2047) Transfer with motorised conveyoring belt KZ2048) CNC Mod. Vector GLR-X 30-13 KZ2049) Transfer with motorised conveyoring belt KZ2050) CNC Mod. Vektor XK 40-13 KZ2051) Transfer with motorised conveyoring belt KZ2052) CNC Mod. Idrak 3 KZ2053) Transfer with motorised carpet with 90° inclination on a rollers table KZ2054) Rollers conveyor with also motorised belts (to move panels at 180° to the assembly lines)

Condition: good (used), Max. blade diameter: 320 mm Blade guard included Max. cutting height: 70 mm Kodpfx Ahsygy Dhjbedu Max. cutting width: 600 mm Possibility of angled cutting in the vertical plane: +90°/-90° (arm or blade movement) Arm rotation right/left: +/- 45° Motor: 2.2 kW