Used Reimelt Inline Sifter for sale (540)

Condition: good (used), functionality: fully functional, input voltage: 400 V, total height: 1,600 mm, total length: 1,310 mm, total width: 5,400 mm, type of input current: three-phase, overall weight: 700 kg, TOP Fat-Frying System Reimelt EL 6/1000S-2 Fat-frying machine with shaping device 1/1000 S for cream-filled pastries and donuts Dwjdpfx Aeygdczel Ajc Tilting mechanism with automatic removal device Temperature controller with safety thermostat Exhaust hood Connection 400V, 63A-CEE plug Dimensions approx.: 5400 x 1310 x 1600 mm, WxDxH Used machine Optional: Maintenance contract Spare parts box Truck delivery service Training and commissioning Visit us!

Condition: used, functionality: fully functional, first registration: 11/2024, Year of construction: 2024, We are offering this used LITHEC LithoFlash Inline HBDM XL75 Inpress Control Lithec Heidelberg XL75, year of manufacture 2024. The Lithec system is a suitable alternative to Heidelberg’s InpressControl. Type: LithoFlash® Inline HBDM XL75 Serial Number: GG 0326 Dsdoyrp Umspfx Al Aowc Year of Manufacture: 10/2024 The system was removed because the press it was installed in has been sold to Asia, where there is no demand for this system. Inline measurement and control system for offset printing Reduced make-ready times increase job throughput. Significant waste reduction results in direct substrate cost savings. In addition, using a measurement and control system also ensures production quality. Application Areas • For sheet-fed and web offset printing presses with a production width of 52–205 cm • Measurement and control of process ink and special color densities • Monitoring of tone value increase, print contrast, and trapping parameters Customer Benefits • High savings thanks to LithoDyn dynamic control • Minimal energy costs due to flashing LED • Clearly structured, user-friendly interface • Definable print control strips • Effective protection against contamination thanks to innovative glass/visor system • Long service life and low operating costs Measurement Methods and Sensors • Wear-free sensor system with integrated dust and dirt protection • Density measurement in accordance with ISO standards • Parallel measurement of all density channels over the entire print width • Measurement of each sheet • 0/45° optics • Maintenance-free, long-life LED measuring light • Polarizing filter • Measuring range: 0.0 – 2.2 D • Use of existing print control strips possible • Selectable height, width, and configuration of measurement fields (minimum size 3×4 mm) • Strip library for optional use of various print control strips • Reproducibility: 0.01 D depending on measurement conditions • Line speed up to 15 m/s Scope of Delivery • Sensor crossbar • Control unit, industrial PC with 23” touchscreen • For the operation of necessary electrical and mechanical assemblies • Advanced Dust Protection (enhanced contamination protection) • LithoDyn (dynamic control) • LithoJobChange (dynamically controlled job change) • LithoFlash One Shot (measurement and control with press at standstill) Naturally, the system can also be installed on machines other than the XL75, such as: KBA RMGT Komori Manroland If you have any questions or would like further information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2025, spindle speed (max.): 2,400 rpm, travel distance X-axis: 508 mm, travel distance Y-axis: 152 mm, travel distance Z-axis: 711 mm, spindle motor power: 29,800 W, overall weight: 9,253 kg, number of axes: 4, This 4-axis HAAS ST-40SY was manufactured in 2025. It features a maximum part swing of 35.5 in and a maximum cutting diameter of 27.5 in. The machine is equipped with a 12-station turret and live tooling capabilities, allowing for versatile machining operations. If you are looking to get high-quality turning capabilities, consider the HAAS ST-40SY horizontal turning machine we have for sale. Contact us for further details. Dwsdez Nx Rcopfx Al Asc • Working Hours: 0 • Showroom Machine • Chuck Size: 15.0 in / 381 mm • Max Part Swing: 35.5 in / 902 mm • Max Cutting Diameter (with BMT75 turret): 27.50 in / 699 mm • Max Cutting Length: 28.0 in / 711 mm • Bar Capacity: 4.00 in / 102 mm • X Axis Rapids: 472 ipm / 12.0 m/min • Y Axis Rapids: 472 ipm / 12.0 m/min • Z Axis Rapids: 710 ipm / 18.0 m/min • Max Thrust X: 5500 lbf / 24465 N • Max Thrust Y: 2300 lbf / 10231 N • Max Thrust Z: 9000 lbf / 40034 N • Spindle Nose: A2-8 • Drive System: 2-Speed Gearbox • Spindle Max Torque: 1400.0 ft-lbf @ 150 rpm / 1898.0 Nm @ 150 rpm • Spindle Bore ø: 4.62 in / 117.3 mm • XP Option Drive System: 2-Speed Gearbox • XP Option Max Rating: 55.0 hp / 41.0 kW • XP Option Max Speed: 2400 rpm • XP Option Max Torque: 2100.0 ft-lbf @ 150 rpm / 2847.0 Nm @ 150 rpm • Main Spindle C Axis Max Rating: 5.0 hp / 3.7 kW • Main Spindle C Axis Max Speed: 49 rpm • Main Spindle C Axis Positioning: ± 0.01 ° • Main Spindle C Axis Brake Diameter: 21.5 in / 546 mm • Main Spindle C Axis Brake Holding Torque: 450 ft-lbf / 610 Nm • Tailstock Taper: MT5 • Tailstock Travel: 26.0 in / 660 mm • Tailstock Max Thrust (Acme): 3,000 lbf / 13,345 N • Tailstock Min Thrust (Acme): 200 lbf / 890 N • Turret Number of Tools: 12 Stations • Turret Index Time (one tool): 2 s • Turret Tooling: BMT75 • Live Tooling Max Speed: 4000 rpm • Live Tooling Tooling: BMT75 • Coolant Capacity: 95 gal / 360 L • Air Requirements: 4 scfm @ 100 psi / 113.0 L/min @ 6.9 bar • Inline Air Hose: 3/8 in • Air Pressure Min: 80 psi / 5.5 bar • Input AC Voltage (3 Phase) - Low: 220 VAC • Full Load Amps (3 Phase) - Low: 70 A (Standard) / 105 A (XP Option) • Input AC Voltage (3 Phase) - High: 440 VAC • Full Load Amps (3 Phase) - High: 35 A (Standard) / 53 A (XP Option) • Domestic Pallet Dimensions: 217.0 in x 95.0 in x 116.0 in / 551 cm x 241 cm x 295 cm • Export Crate Dimensions: 217.0 in x 95.5 in x 120.5 in / 551 cm x 243 cm x 306 cm • Export Crate Weight: 22,141 lb / 10,043.0 kg Additional equipment • Chip conveyor • Remote jog handle / CNC control pendant • Auto-door feature • Eppinger Preci-Flex live tooling holders • Samchully 3-jaw chuck • Tool setter / touch probe • Coolant/air blow hose Technical Specification Counter Spindle No Driven Tools Yes

Year of construction: 2012, condition: used, machine/vehicle number: 30010212009, - Dimensions (L x W x H): 635 x 640 x 1570 mm - Serial number: 30010212009 - Year: 08/2012 - Tank capacity: 50 kg - Production rate: 50 kg/min - Power: 1.1 kW - Voltage: 380V - Stainless steel body - Mounted on a wheeled base - Weight: 88 kg Dsdpfx Alszytv Ao Aowc

Condition: used, Year of construction: 2007, operating hours: 20,000 h, functionality: fully functional, total height: 1,800 mm, total length: 1,000 mm, total width: 1,200 mm, feed rate X-axis: 12 m/min, feed rate Y-axis: 12 m/min, feed rate Z-axis: 6 m/min, feed length X-axis: 600 mm, feed length Y-axis: 600 mm, feed length Z-axis: 50 mm, We offer this used DIMA (Selective Protective Coating Machine) Hybrid Coating System HC-200, manufactured in 2007. Sale is ex works. Operating hours: 20,000 h, machine is operational. If you have any questions or require further information, please send us a message or call us. On-site inspection is welcome. Technical data: Type: HC-200 Selective protective coating machine Dimensions (L x W x H): 1000 x 1200 x 1800 mm (+500 mm for signal light) Dodpoz Ix R Esfx Al Aowc Stepper motor in combination with encoder, with ball screw and linear guide and spline axis XY speed 0.2 m/s Z-axis speed 0.1 m/s XYZ resolution 0.00625 mm Resolution of the rotary axis 0.036° Rotation 370 degrees Working area (based on a valve on the Z-slide) 600 x 600 mm – Z-movement 50 mm Inline chain conveyor 500 x 600 mm – Z-movement 50 mm Inline belt conveyor with clamping 525 x 600 mm – Z-movement 50 mm Min./Max. conveyor width (chain): 35 mm / 500 mm (manually adjustable) 35 mm / 500 mm (automatically adjustable) Min./Max. conveyor width (belt): 35 mm / 500 mm

Condition: used, Year of construction: 2016, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: -, overall weight: 1,000 kg, total length: 3,500 mm, total width: 500 mm, total height: 1,200 mm, input voltage: 400 V, type of input current: three-phase, cutting speed: 50 mm/min, The Oddy Novatek 2 Pocket Roll Plant with Pinner is used to automatically divide, round, shape, and mould raw bread dough into uniform rolls and buns at high speeds. It replaces the labor-intensive process of scaling and shaping dough by hand, making it a staple machine for small-to-medium commercial bakeries, wholesale bakers, and supermarket in-store bakeries. 1. Primary Functions: Dividing: It automatically cuts a bulk mass of dough into precise, equal weights without tearing the dough structure. Rounding: It rolls the divided dough portions into tight, consistent round dough balls (baps, dinner rolls). Pinning & Moulding: The integrated "pinner" section flattens and rolls the round dough pieces into elongated shapes (finger rolls, hot dog buns). 2. Specific Bakery Products It Creates: By changing the internal moulding drums or adjusting the pinner belts, bakeries use this machine to produce: Round items: Hamburger buns, traditional baps, dinner rolls, and slider buns. Elongated items: Hot dog rolls, finger rolls, bridge rolls, submarine rolls, and miniature baguettes/batards up to 230mm long. 3. Why Bakeries Use It (Key Benefits): Massive Labour Savings: It can produce up to 6,000 rolls per hour (100 rolls every minute), a volume that would require a large team of bakers to do manually. Dodpfx Aoz Ad Dcel Aswc Cost Efficiency (Oil-Free System): Unlike traditional dividers that require expensive food-grade divider oil to keep dough from sticking, the Novatek uses a completely dry, oil-free process. This saves thousands of pounds annually in oil costs and makes cleanup much easier. Product Consistency: Every roll comes out exactly the same weight (from 10g up to 208g in 2-row mode) and the same shape, which ensures uniform baking times and presentation. Physical Dimensions & Spatial Footprint: Standard Operating Footprint: Typically occupies a width of 0.8 m to 1.2 m and a base chassis length of 1.5 m to 2.5 m. Extended Length with Integral Pinner: When configured with the long-bed outfeed pinner/moulder belt assembly, the total inline workspace length requires approximately 3.2 m to 3.8 m to clear the outfeed table. Operating Height: Roughly 1.6 m to 1.8 m to the top rim of the bulk dough feed hopper to facilitate ergonomic manual or conveyor loading. Total Net Weight: Approximately 950 kg to 1,200 kg depending on the configuration of heavy-duty plunger blocks, internal moulding drums, and chassis reinforcement. Operational & Production Capabilities. Throughput Capacity: Processes up to 50 dough pieces per minute per row. For a standard 2-pocket (2-lane) configuration, this delivers a maximum output of 6,000 pieces per hour. Hopper Capacity: Features a standard integrated bulk dough conveyor hopper that accommodates 55 kg of raw dough. Scaling Ranges: 2-Row Operation: Scales between 10 g and 208 g simultaneously across both lanes. 1-Row Operation: Reaches 208 g to 500 g utilising lane blanking and larger interchangeable plunger blocks. Pinner Capabilities: Accurately stretches and shapes rounded dough pieces into finger rolls, hot dog buns, or miniature batards up to a maximum length of 230 mm. Utility & Facility Requirements: Electrical Supply: Requires a standard industrial 3-phase 400V, 50Hz electrical hookup.

Condition: good (used), functionality: fully functional, machine/vehicle number: C7154, Powtek - gericke rotary sieve Dsdpfsvz Smmsx Al Aswc housing: steel rotor: steel inlet: stainless steel Ø300mm outlet: stainless steel Ø300mm transition sieve deck: nylon sieve deck 2mm coarse outlet: adjustable

Condition: like new (used), Year of construction: 2014, functionality: fully functional, Tetra Alfast Direct Inline standardisation system, designed for inline standardisation of milk and cream. Capacity: 25,000 l/h. Year of manufacture: 2014 Equipped with 2 density meters, 4 electromagnetic flowmeters, and 3 flow control valves for measuring and controlling the fat content in milk and cream. - Including original documentation. - Can be operated via Profibus central system Dwjdpfjwf Iq Usx Al Asc - Can run stand-alone with SCADA system Sattline; we are currently working on integrating a control screen in the control panel to make stand-alone operation easier. - Excellent condition.

Condition: excellent (used), Automatic machine with product feed conveyor in line set up for manual loading of the product on the belt or inserted in completely automatic lines. Suitable for packaging individual or already packaged products such as boxes, trays, hanks of cable, parquettes, or light to very light products with a minimum height of 3mm such as boxes, linen, reams of paper, magazines, leaflets. In production up to 23.09.2026 Dwodpfsz D Ugusx Al Aec Price € 7,995.00 Quantity 2 machines available Shipping can be arranged for the buyer

Condition: used, Machine description Used continuous finishing line for steel flat bar and strip, second-hand and for sale complete with 15 in-line stations. Entry section: DIMECO decoiler with expanding mandrel, roller straightener, welder, drive unit and loop table. Surface preparation: FISHER inline shot blasting machine with dust collector and suspended brush-shear. Sizing section: cold, dry 2-high rolling stand, continuous tension straightener and Zumbach USYS laser gauge. Exit section: pneumatic shear, cut-to-length shear, bar run-out conveyor and product-specific coil recoiler. Schneider Electric Magelis operator panel with bar and coil modes. Capacities, year of manufacture and installed power: not specified. Applications This descaling, cold rolling and sizing line converts hot-rolled strip or flat bar coils into shot-blasted, cold-rolled, straightened and gauged products, delivered as cut-to-length bars or coils. Typical buyers include steel mills, flat wire and strip producers, spring and blade manufacturers, stamping plants and flat product finishing centres. Key features / Advantages Djdoz N Ahxspfx Al Aswc Complete finishing line from decoiling to packaging, with mechanical shot blast descaling instead of acid pickling. Components from active manufacturers (DIMECO, Zumbach, Schneider Electric) make spare parts easier to source. Bar or coil output on the same line. A second line of identical configuration is also for sale, and both can be purchased as a matched pair. Sold as-is, dismantling by the buyer, available now from All Metal, specialist in used industrial machinery. Configuration: 15 posts online Unwinder: DIMECO, expanding chuck Surface preparation: fisher nip fryer? Rolling: dry cold rolling cage (duo) Straightening: roller straightener + continuous tension straightener Measurement: laser Zumbach USYS Cut: pneumatic shear + shear for length cutting Exit: bar rail conveyor + dedicated product winder Production modes: barrel / crown Order: Schneider Electric Magelis HMI Processed products: plates and steel straps Sale: as is, dismantling at the buyer's expense

Year of construction: 2008, condition: like new (used), LEWA Inline Dilution and Dosing Systems These mobile dosing units (2 units) are designed as inline dilution and dosing systems. They are used for the precise production and delivery of liquid mixtures/buffer solutions directly in the production process, without the need for separate mixing tanks. Dosing range: 1st unit 60 - 2,100 and 2nd unit 15 - 800 liters/hour LEWA Ecodos - dosing pumps for highly precise dosing of different liquids Diaphragm valves and pressure holding valves for exact pressure and flow regulation Static mixer, which homogenously mixes the added media Measuring and control technology such as flow meters, pressure sensors, pH and conductivity meters for process monitoring Control and operation: Simatic 15 Touch Panel PC 667 Controller: Simatic S7-300 Data recording: Yokogawa DX 220 P recorder Liquid analysis system: Mettler Toledo M 700 Manufacturer: LEWA Year of manufacture: 2008 Dwodpfx Aszl S Stel Aec Space requirement: approx. 210 x 130 x 220 cm + approx. 150 x 90 x 165 cm

Year of construction: 2008, condition: defective spare-parts repository (used), functionality: unexamined, power: 5 kW (6.80 HP), number of previous owners: 1, noise level: 69 dB, machine/vehicle number: 070523, Current operating hours of the tube: unknown Maximum PCB width: 450 mm x 400 mm Inline X-ray imaging + AOI History from the previous owner is available We acquired the machine as "functional," but it was likely used as a source of spare parts by the previous owner. Therefore, it cannot be guaranteed that all components are present. We have never put the machine into operation and cannot provide any information about its condition during operation. You are welcome to inspect the machine in 72108 Rottenburg and form your own opinion. Dsdpfjzhwvpsx Al Aewc Since we are selling the machine as defective/in need of repair, the goods are sold with the exclusion of any warranty and any liability for defects.

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, total height: 2,570 mm, total width: 2,340 mm, overall weight: 5,316 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 22,400 W, product length (max.): 3,330 mm, number of axes: 3, This 3-axis HAAS VF-4 was manufactured in 2024. It features impressive travels of 1270 mm in the X-axis, 508 mm in the Y-axis, and 635 mm in the Z-axis. The machine includes a robust table size of 1321 x 457 mm and a maximum table load of 1588 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-4 vertical machining centre we have for sale. Contact us for further details. • Feed Force: X: 11343 N; Y: 11343 N; Z: 18683 N • Rapid Traverse: 25.4 m/min • Outer length: 1321 mm • Outer width: 457 mm • Tslots size: 15.90 mm to 16.00 mm • Number of tslots: 5 • Max distance between vertical spindle and table: 742 mm • Table load: 1588 kg • Number of tool slots: 30+1 • Max tool length: 330 mm • Main electronic connection: 220 VAC / 440 VAC, 3 Phase • Air pressure: 5.5 bar • Air supply: 113.0 L/min @ 6.9 bar • Showroom Machine • Spindle nose to table (~ min): 107 mm • Max torque: 122.0 Nm @ 2000 rpm • Max torque with optional gearbox: 339 Nm @ 450 rpm • Bearing lubrication: Air / Oil Injection • Cooling: Liquid Cooled • T-Slot center distance: 80 mm • Max cutting feedrate: 16.5 m/min • Tool changer type: Side-Mount Tool Changer (SMTC) • Max tool diameter (full): 64 mm • Max tool weight: 5.4 kg Dwodpfx Aez Nldcjl Aec • Tool-to-tool (avg): 2.80 s • Chip-to-chip (avg): 3.60 s • Coolant capacity: 208 L • Inline air hose: 3/8 in • Coupler (Air): 3/8 in • Input AC voltage (3 Phase) low: 220 VAC (Full Load Amps: 70 A) • Input AC voltage (3 Phase) high: 440 VAC (Full Load Amps: 35 A)

Condition: like new (used), Bought new in 2022 and only used for a few months before the factory went Bankrupt. As new condition. 1 year guarantee. Djdpfx Aleyivtqj Ajwc

Year of construction: 2009, condition: ready for operation (used), Max. solids throughput: 5m³/h, suspension flow: 20-30m³/h, drive power: 45-75kW, speed range: 500-1800/min, delivery pressure: less than 3.5bar, batch volume: 300-15,000l. Equipment: solids feed via rotary valve, downstream solids disperser, acceleration chamber, cyclone with laminar flow section, conical compaction zone with housing cooling, solids feed tunnel with safety slide valve, mains-powered pump, batch tank with agitator, rotor as liquid ring pump, suspension outlet at the largest diameter. Suitable for resin dispersions, architectural paints, industrial coatings, filler pastes, pigment dispersions, automotive coatings, UV coatings, fire protection coatings, marine paints, gelcoats, gravure inks, newspaper rotary printing inks, heatset inks, coldset inks, sheetfed offset inks, flexographic inks, screen printing inks, inkjet inks, extenders, food and beverages, pharmaceutical and cosmetic products, pastes made from pyrogenic silica, aluminium oxide pastes, plastisols, foam-free aqueous suspensions, casting resins. The machine has been used very little, with control cabinet, powder container, pressure load cells and operating manual. An on-site inspection is possible. Dwsdpfx Alozh Nhqe Aec

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 7,500 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-5/50XT was manufactured in 2023. It features an impressive X-axis travel of 1524 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. The machine includes a robust table size of 1575 x 584 mm and a maximum table load of 1814 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-5/50XT vertical machining centre we have for sale. Contact us for further details. • Working Hours: 0 (Showroom machine) • Spindle Nose to Table (max): 32.9 in / 836 mm • Spindle Nose to Table (min): 7.9 in / 201 mm • Spindle Max Torque: 340.0 ft-lbf @ 700 rpm / 460.0 Nm @ 700 rpm • Spindle Drive System: 2-Speed Gearbox • Table Length: 62.0 in / 1575 mm • Table Width: 23.0 in / 584 mm • T-Slot Width: 0.626 in to 0.630 in / 15.90 mm to 16.00 mm • T-Slot Center Distance: 3.15 in / 80 mm • Number of Std T-Slots: 7 • Max Weight on Table (evenly distributed): 4000 lb / 1814 kg Dsdpfez Nlyqex Al Ajwc • Max Cutting Feedrate: 500 ipm / 12.7 m/min • Rapid Traverse (X, Y, Z): 710 ipm / 18.0 m/min • Max Thrust X: 3400 lbf / 15124 N • Max Thrust Y: 4100 lbf / 18238 N • Max Thrust Z: 5600 lbf / 24910 N • Tool Changer Type: SMTC (Side-Mount Tool Changer) • Tool Capacity: 30+1 • Max Tool Diameter (full): 4.0 in / 102 mm • Max Tool Diameter, Large (adjacent empty): 7.0 in / 178 mm • Max Tool Length (from gage line): 16.00 in / 406 mm • Tool-to-Tool Time (avg): 4.20 s • Chip-to-Chip Time (avg): 6.30 s • Coolant Capacity: 95 gal / 360 L • Air Required: 4 scfm @ 100 psi / 113.0 L/min @ 6.9 bar • Inline Air Hose: 3/8 in • Coupler (Air): 3/8 in • Air Pressure Min: 80 psi / 5.5 bar • Input AC Voltage (3 Phase) - Low: 220 VAC (70 A Full Load) • Input AC Voltage (3 Phase) - High: 440 VAC (35 A Full Load) • Domestic Shipping Pallet Dimensions: 168.0 in x 102.0 in x 125.0 in / 427 cm x 260 cm x 318 cm • Export Crate Dimensions: 168.0 in x 102.0 in x 130.0 in / 427 cm x 260 cm x 331 cm • Shipping Weight: 16250 lb / 7371.0 kg Additional equipment • Machine vise mounted on T-slot table • Air gun attachment • Spray container and cleaning brush holder mounted on control arm console Technical Specification Taper Size BT 50

Condition: ready for operation (used), Year of construction: 2025, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, overall weight: 6,464 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, tool weight: 5,400 g, number of axes: 5, This 5-axis HAAS UMC-750 was manufactured in 2025. It features an impressive X-axis travel of 762 mm, Y-axis travel of 508 mm, and Z-axis travel of 508 mm. The machine is equipped with a maximum spindle speed of 12,000 rpm and a tool capacity of 30+1. If you are looking to get high-quality machining capabilities, consider the HAAS UMC-750 universal machining centre we have for sale. Contact us for further details. • Working Hours: 0 • Showroom Machine • Spindle Nose to Platter (~ max): 24.0 in / 610 mm • Spindle Nose to Platter (~ min): 4.0 in / 102 mm • Spindle Max Torque: 90.0 ft-lbf @ 2000 rpm / 122.0 Nm @ 2000 rpm • Spindle Drive System: Inline Direct-Drive • Spindle Taper: CT40 | BT40 | HSK-A63 • Spindle Bearing Lubrication: Air / Oil Injection • Spindle Cooling: Liquid Cooled • B Axis (Tilt) Travel: +120° to -35° • B Axis Max Speed: 170 °/sec • B Axis Continuous Torque: 2240 ft-lbf / 3037 Nm • B Axis Brake Torque: 2000 ft-lbf / 2712 Nm • C Axis (Rotation) Travel: 360° • C Axis Max Speed: 179 °/sec • C Axis Continuous Torque: 1854 ft-lbf / 2514 Nm • C Axis Brake Torque: 900 ft-lbf / 1220 Nm • Max Part Swing: 27.0 in / 686 mm • Platter Diameter: 19.70 in / 500 mm • Max Weight on Platter: 660 lb / 300.0 kg • Max Weight on Platter w/ Pallet Pool: 200 lb / 90.7 kg • T-Slot Width: 0.626 in to 0.630 in / 15.90 mm to 16.00 mm • Number of Std T-Slots: 7 • T-Slot Center Distance: 2.48 in / 63 mm • Max Cutting Feedrate: 833 ipm / 21.2 m/min • Rapid Feedrate (X, Y, Z): 1200 ipm / 30.5 m/min • Max Thrust X / Y: 3300 lbf / 14680 N • Max Thrust Z: 4050 lbf / 18015 N • Tool Changer Type: Side-Mount Tool Changer (SMTC) • Tool Capacity: 30+1 • Max Tool Diameter (full): 2.5 in / 64 mm Dsdpfx Ajz Nmigjl Aowc • Max Tool Diameter (adjacent empty): 5.0 in / 127 mm • Max Tool Length: 12.00 in / 305 mm • Tool-to-Tool Time (avg): 1.80 s • Chip-to-Chip Time (avg): 2.40 s • Coolant Capacity: 55 gal / 208 L • Air Required: 4 scfm @ 100 psi / 113.0 L/min @ 6.9 bar • Air Pressure Min: 80 psi / 5.5 bar • Electrical Input AC Voltage (3 Phase): 220 VAC (70 A) / 440 VAC (35 A) • Shipping Weight (Standard): 14250 lb / 6463.8 kg Technical Specification Taper Size BT 40

Condition: good (used), KSB Etaline GN G11 centrifugal pump Inline centrifugal pump and three-phase standard motor with a motor-mounted frequency converter for stepless speed control. Applications: Heating systems Air conditioning systems Domestic water systems Water supply Industrial circulation systems Fluid Liquids that do not chemically or mechanically attack the pump materials. Operating data Q up to, see data sheet H up to, see data sheet The data for this pump can be found in the data sheet. 1) The sum of the inlet pressure and the head at the zero flow point must not exceed the stated value. Design Block pump in inline design, with a speed-controlled standard motor; the pump and motor shafts are rigidly connected. Bearings Deep groove ball bearings, grease-lubricated. Shaft seal Uncooled and maintenance-free mechanical seal according to EN 12 756. Pump series: Etaline Material combination: Gray cast iron Standard motor and stub shaft Dwjdpfxsiu U Txj Al Aoc Frame size designation: 80 Nominal size suction/discharge nozzle 210 Further technical data can be found in the data sheet. Item condition: used Scope of delivery: 1 x KSB pump Etaline GN G11

Condition: excellent (used), Very rare option for the last model of the Accuriopress Inline Trimmer unit TU-510, in perfect condition. Basic function: 2-side slitting, 4-edge trimming, 4-edge trimming + 2-way slitting. Dwedez Nygfepfx Al Aec Media weight: 50-400 gsm up to 487.7 mm, 128 – 300 gsm up to 1,300 mm* Media size: Min 140 x 153 mm, max. 330.2 x 1,300* mm (900 mm duplex mode) * Weight: 272 kg standard / 328 kg with all options JS-507 – Business Card Tray Kit Basic function: Enables business card cutting with a separate output tray. Standard finished size: 50 x 85 mm to 56 x 92 mm Standard number of cards: Trims 7 columns x 3 rows (21 cards per sheet) Output capacity: 420 Business Cards (depending on paper weight) MK-764 – Banner Paper Kit Basic function: Enables long-sheet feeding and page reversal during paper output. TU-504 – Centre Slit Kit Basic function: One- or two-line slitting. Paper weight: 128 to 300 gsm Media size before trimming: 1-line slitting Min 194 x 133 mm, Max 330.2 x 487.7 mm; 2-line slitting Min 271 x 133mm, Max 330.2 x 487.7 mm Media size after trimming: 1-line slitting Min. 85 x 133 mm, Max. 161.1 x 487.7 mm; 2-line slitting Min. 85 x 133 mm, Max. 104.7 x 487.7 mm CR-102 Creasing Kit Basic function: Downward convex crease operation Number of creases: 1 to 5 Crease setting steps: 0.1 mm Minimum crease interval: 1 mm A first in the industry, the TU-510 cuts everything from small business cards to oversized long sheets. With both slitting and trimming capabilities, this new Konica Minolta finishing option produces full-bleed output. Its functionality can be extended with further accessories for creasing as well as full-bleed business card and postcard output. Via the connection with the IQ-501 Intelligent Quality Care unit, color consistency and registration accuracy are ensured for every printed sheet. Our intelligent trimmer even supports extra-long sheets, offering attractive opportunities for business expansion. At the same time, it helps save valuable operator time and thus reduces the cost of manual labor. As an experienced retailer of second-hand copiers, we have developed real expertise in packing and pallet shipping to guarantee that our customers receive machines in perfect condition. We ship copiers that come from, and are maintained by, Konica Minolta France. Our company offers the largest range of Konica Minolta production copiers and handles worldwide deliveries upon request.

Condition: used, Year of construction: 2008, Horizon StitchLiner SL-5500 The Horizon StitchLiner 5500 is a powerful all-in-one solution for booklet production. It combines collating, creasing, folding, stitching, and three-knife trimming in a single, efficient process. With its user-friendly operation, high productivity, and versatility, this system offers numerous benefits for print shops, binders, and on-demand printing. This StitchLiner 5500 includes the following components: - 1x VAC-100a, 1x VAC-100c Collators - 1x ST-40 - 1x ACF-30 - 1x SPF-30 - 1x HTS-30 Key Features: - 20 stations - Inline production from collating to finished product - Variable data processing: Handles personalized prints and variable page counts, ideal for digital printing - Fully automatic format adjustment for quick job changes - Touchscreen for user-friendly operation, even for less experienced operators Specifications: - Sheet sizes: Max. 500 x 350 mm, Min. 148 x 120 mm - Paper weight: 40-350 gsm - Processing thickness: 8-200 pages (max. 5 mm spine thickness) - Production speed: Up to 5,500 booklets/hour - Stitch distance: 60-150 mm Dwsdpfxsz Nw Nkj Al Ajc Technical Details: - Trimming (untrimmed): Max. 350 x 250 mm, Min. 140 x 103 mm - Trimming (trimmed): Max. 312 x 230 mm, Min. 120 x 95 mm - Power supply: 400V / 50Hz - Space requirement: Min. 5,709 x 3,240 mm - Total weight: Approx. 2,500 kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price

Year of construction: 2025, condition: refurbished (used), functionality: fully functional, Container conveyor scale, electronic, pneumatic, bulk material scale, 60 tons/hour. Calibratable, year of manufacture 2025 (all electrical and pneumatic components have been completely overhauled). For fine-grained bulk materials such as grain, high measuring accuracy. Ideal for goods receiving and loading. High throughput capacity, dust-proof frame construction. Purchased to replace a mechanical conveyor scale, but not installed due to the short-term shutdown of operations. Pre-hopper with level indicator also available. Djdezy Rcyopfx Al Aewc

Condition: excellent (used), Very rare option for the last model of the Accuriopress Inline Trimmer unit TU-510, in perfect condition. Basic function: 2-side slitting, 4-edge trimming, 4-edge trimming + 2-way slitting. Media weight: 50-400 gsm up to 487.7 mm, 128 – 300 gsm up to 1,300 mm* Media size: Min 140 x 153 mm, max. 330.2 x 1,300* mm (900 mm duplex mode) * Weight: 272 kg standard / 328 kg with all options JS-507 – Business Card Tray Kit Basic function: Enables business card cutting with a separate output tray. Standard finished size: 50 x 85 mm to 56 x 92 mm Dsdpfxez Nxnns Al Ajwc Standard number of cards: Trims 7 columns x 3 rows (21 cards per sheet) Output capacity: 420 Business Cards (depending on paper weight) MK-764 – Banner Paper Kit Basic function: Enables long-sheet feeding and page reversal during paper output. TU-504 – Centre Slit Kit Basic function: One- or two-line slitting. Paper weight: 128 to 300 gsm Media size before trimming: 1-line slitting Min 194 x 133 mm, Max 330.2 x 487.7 mm; 2-line slitting Min 271 x 133mm, Max 330.2 x 487.7 mm Media size after trimming: 1-line slitting Min. 85 x 133 mm, Max. 161.1 x 487.7 mm; 2-line slitting Min. 85 x 133 mm, Max. 104.7 x 487.7 mm CR-102 Creasing Kit Basic function: Downward convex crease operation Number of creases: 1 to 5 Crease setting steps: 0.1 mm Minimum crease interval: 1 mm A first in the industry, the TU-510 cuts everything from small business cards to oversized long sheets. With both slitting and trimming capabilities, this new Konica Minolta finishing option produces full-bleed output. Its functionality can be extended with further accessories for creasing as well as full-bleed business card and postcard output. Via the connection with the IQ-501 Intelligent Quality Care unit, color consistency and registration accuracy are ensured for every printed sheet. Our intelligent trimmer even supports extra-long sheets, offering attractive opportunities for business expansion. At the same time, it helps save valuable operator time and thus reduces the cost of manual labor. As an experienced retailer of second-hand copiers, we have developed real expertise in packing and pallet shipping to guarantee that our customers receive machines in perfect condition. We ship copiers that come from, and are maintained by, Konica Minolta France. Our company offers the largest range of Konica Minolta production copiers and handles worldwide deliveries upon request.

Condition: good (used), Year of construction: 2012, Gerber conversion software Easy-to-use software package with touch screen operation SPC Plus software Measurement: insufficient, excessive, or missing solder paste bridging paste deformations volume, height XY positions shadow-free measurement via dual-path projections 4 MPix high-speed camera, 20µm XY resolution, 0.37µm Z resolution approx. 60cm²/sec inspection speed Z-axis tracking SPC-Plus software package Max. PCB size: 510x510mm automatic width adjustment Djdpfx Asx H Ryujl Aewc SMEMA interface Transport height 950 +/- 50mm QR code recognition 2D detection of bridges and smearing

Condition: used, Stainless steel inline mixer, mixing screw, paddle mixer Dodpfx Ajzc Idnjl Aewc Diameter: 280mm Length: 3000mm Motor power: 2.2kW, 30 rpm See our other listings. VMA Wekerom

Condition: like new (used), Year of construction: 2022, operating hours: 458 h, functionality: fully functional, machine/vehicle number: 1536582684A, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, nominal power (apparent): 30 kVA, torque: 83 Nm, workpiece height (max.): 550 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 200 kg, total height: 3,200 mm, total length: 4,500 mm, total width: 3,500 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 12,000 rpm, overall weight: 4,700 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 13 W, number of spindles: 3, number of slots in tool magazine: 30, tool diameter: 80 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, We offer this DMG MORI CMX 50 U universal machining center, in like-new condition. Operating hours: Power-on hours: 458 h / Spindle: 330 h, year of manufacture 2022. TECHNICAL DATA Axis travels: • X = 500 mm • Y = 450 mm • Z = 400 mm • B = -5° / +110° • C = n × 360° Work table: • 630 × 500 mm pivoting rotary table • 7 T 14 H7 grooves, 63 mm pitch • Central hole Ø 30 H6 • Permissible table load: 200 kg • Axis – table distance: 150–550 mm Main spindle (inline spindle): • Speed: 20 – 12,000 rpm Djdpfx Aez Epnvsl Ajwc • Power: 13 kW (40% DC) / 9 kW (100% DC) • Torque: 83 Nm (40% DC) / 57 Nm (100% DC) • Tool shank: SK40 DIN 69871 • Clamping according to DIN 69872, hydraulic control • Clamping force SK40/BT40: 10 kN Tool magazine: • 30 positions, chain with double gripper • Max. tool diameter: 80 mm (130 mm with adjacent pockets free) • Max. tool length: 300 mm (from the spindle face) • Max. tool weight: 8 kg • Max. magazine load: 120 kg • Tool change time: 2.7 s Feeds and accuracy: • Rapid feed rate X/Y/Z: 30 m/min • Max. feed force (40% DC): 4.5 kN • Linear guide rails with rollers on all axes • Direct measuring system on X, Y, Z (including air purge) • Positioning accuracy X/Y/Z: A = 6 µm (ISO 10791-4) • Repeatability X/Y/Z: R = 5 µm (ISO 10791-4) • Accuracy B/C: A = 16 seconds of arc (ISO 10791-4) • Repeatability B/C: R = 12 seconds of arc (ISO 10791-4) INCLUDED EQUIPMENT Base machine: • CMX 50 U universal machining center (C-A3390F) • DMG MORI SLIMline Multi-Touch 19" / Siemens 840D SL control (C-B3097F) • Coolant or air, switchable via M functions • Chip tray / drawer • Enclosure with sliding door • DMG MORI IoTconnector included as standard 20 bar production package with chip conveyor (C-K3661F): • Internal 20 bar coolant supply • Scraper-type chip conveyor, 250 l tank (left) • Washing of bed and ATC arm via M function • Coolant spray gun • External electronic handwheel • Enclosure roof • 4-color signaling lamp • Double cartridge filter (filter change without stopping the machine) Measurement / monitoring: • Renishaw measuring kit for Siemens (C-K4222F): PP40 probe with optical transmission, TS27R tool probe, measuring cycles with tool breakage monitoring, dummy tool and calibration ring • 3D QuickSET for CMX U (C-K2530F) – control and compensation of 5-axis kinematic accuracy Software and documentation: • DXF Import option on Siemens controller (C-G3067F) • Documentation in Romanian • Screen text in Romanian DMG MORI Digital Products: • Digital production package: IoTconnector, machine data connector MDC (OPC UA / MTConnect / MQTT), NETservice (remote diagnostics) • Messenger V4 – machine status in real time • DMG MORI Service Agent – preventive service warning • Machine 3D model in STEP format (upon signing of NDA, for CAD/CAM) NUMERICAL CONTROL – Siemens SINUMERIK 840D SL • TCU30.3 console, NCU720.3B PN • Safety Integrated • 19" multi-touch screen, 1024 × 1280 • Block processing time: 1.5 ms • User memory 16 MB + 4 GB extension (EES) CONNECTIONS • Standard 12,000 rpm: 30 kVA / 47 A / 50 A fuse at 400 V • With 20/40/80 bar package: 32 kVA / 50 A / 63 A fuse at 400 V • Voltage: 400 V / 230 V, 50/60 Hz, ±10% • Air: 6–8 bar, average consumption approx. 30 m³/h