Used Proton Bar Transfer Powder Coating System for sale (44,574)

Condition: used, Year of construction: 1999, functionality: unexamined, Good day, For sale is a sputtering system for glass manufactured by Beijing Instruments Factory / JDS, model JDS800. The system utilizes the Physical Vapor Deposition (PVD) process to horizontally deposit coatings onto substrates. The unit measures approximately 5 meters in length and 1 meter in width. The substrate size is about 400 x 420 mm. Please refer to the photos for detailed dimensions. The system is complete with various power supplies, fore-vacuum pumps, and a turbomolecular pump. Technical drawings are available, along with several folders containing technical documentation. The machine was disconnected from the mains in working condition. Nodpjy D Uphefx Afajwf Dismantling and transport are the responsibility of the buyer.

Year of construction: 2017, condition: ready for operation (used), The Trans-Blot Turbo transfer system combines traditional blotting techniques with modern filter paper and buffers, allowing rapid transfer of proteins from gels to membranes with minimal preparation time. The system integrates a high amperage power supply that directs current between a built-in platinized titanium anode and a stainless steel cathode. This enables highly efficient and rapid transfer in as little as 3 minutes. The entire system is in a ready-to-use format that allows researchers to obtain their results faster and easier, with reproducibility that is difficult to achieve using traditional blotting methods. Rapid transfer — transfers mini or midi gels in as little as 3 min High throughput — can transfer 1–4 mini or 1–2 midi gels in a single run Nwedpfx Aoy D D Rhsfaef Greater transfer efficiency — higher transfer efficiency compared to other transfer methods Flexible design — allows user to customize transfer conditions and is compatible with traditional semi-dry consumables Environmentally friendly — environmentally safe consumables eliminate disposal cost Good working condition. Please check out our other listings as well.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: SN 1171, workpiece weight (max.): 450 kg, working height: 870 mm, feed rate Y-axis: 45 m/min, working width: 300 mm, warranty duration: 12 months, total length: 1,900 mm, height adjustment type: mechanical, overall weight: 450 kg, total height: 1,500 mm, total width: 1,300 mm, compressed air connection: 6 bar, Equipment: documentation/manual, The APACHE 3 is a cost-effective solution suitable for both craft and industrial applications, specifically designed for coating facade claddings and their supporting substructures. It is perfectly suited—without limitation—for coating profiles with cross-sections of 300 mm x 25 mm, providing flawless surfaces in a highly efficient and cost-saving manner, requiring no special prior knowledge from the operator. This unit can also be integrated into automated systems or coating lines. It can coat boards, profiled boards, tongue-and-groove boards, rhomboid profiles, laminated timber, and structural timber, as well as decking, garden, log cabin, sauna or privacy screens. Essentially, it's ideal for any product requiring a premium-quality visible surface. Substructures (typically black) can also be coated with low-viscosity, highly pigmented stains containing wood preservatives—even without lateral brushes. The APACHE 3 distinguishes itself from standard market products by its robust monoblock steel welded frame and a coating applied using a baking process with extremely resistant Teflon (enamel). This non-stick coating ensures self-cleaning, making the machine extremely low-maintenance. The machine offered is brand new and available for demonstration in our showroom. We would be pleased to demonstrate our machines and systems either on-site or at customer locations in your vicinity. For further information and a detailed description, please visit our SARMAX website. APACHE 3 Serial number: SN 1171 Flood coating unit with three (3) brushes Working width: 300 mm Working height: 100 mm Minimum workpiece length: 100 cm Feed speed, frequency-controlled: 10–45 m/min Number of driven transport rollers: 3 Diameter of transport rollers: 80 mm Brush arrangement: two (2) from above, one (1) from below Diameter of brushes: 160 mm Central brush drive: 2.2 kW Compressed air blow-off left/right, fan nozzles to clear tongue-and-groove: 80 l/min Double diaphragm pump: 90 l/min Nsdpoxhquxofx Afajwf Compressed air consumption: 600 l/min Connection: CEE plug 16 A 400/50/3 V/Hz/P E Total power: 4.5 kW Working height: 900 +/- 50 mm Approximate weight: 450 kg Operation: via control and indicator devices according to VDE, hydraulic ball valves Dimensions (L/W/H): 1,900 x 1,300 x 1,500 mm Standard: CE Color, design: grey 7046 RAL

Condition: good (used), Year of construction: 2018, functionality: fully functional, Gema Year of manufacture: 2018 Equipped with 6 automatic guns, 2 manual spray guns Nodpfxey Al T Io Afaswf Max. pass-through dimensions: L x H x W, 3m x 2m x 1.1m Magic Compact BA04 Color change system Magic Compact BA4 OptiCenter OC2 Powder coating device OptiMatic AS06-8P Lifting equipment ZA7-23 Mono-cyclone 24,000 [Nm3/h] from Therma Afterfilter exhaust air volume 24,000 [Nm3/h] STS fire suppression system Caldan Overhead conveyor system Power & Free by Caldan Year of manufacture: 2018 Approx. 120 linear meters, with 12 product carrier trolleys, each 3 meters Custom built by Protaurus Gas-heated curing oven by Protaurus Year of manufacture: 2018 Weishaupt burner type WG40N/1-A, 500 kW output Complete with control system and accessories Without insulation material, oven casing needs to be overhauled Complete system by Gema and Caldan professionally packed Professional reassembly by Gema and Caldan prepared Layout attached Transportation costs, reassembly, and commissioning to be borne by the buyer

Condition: new, Year of construction: 2026, Some components can be choose: - chamber pretreatement with osmosis plant, Nedpfxjizw Hne Afajwf - Water drier oven, - Powder curing oven, - manual transportsystem inkl. steel frame, - Controler siemens, Additionsal chooseable components possible.

Condition: used, Powder coating line Includes: - Polyester-lined paint booth with 3x1m internal capacity - Equipped with an external door for painting - Inlet and outlet opening size for parts carousel: X Njdpfxsxgnpko Afaewf - Side window opening size for painting: X - Drying oven 3x1m - Brand: SART - Model: HE - Power: 18,000W - Powder coating gun - Brand: X - Model: X - Carousel with roller carts for part transport (approx. 20 meters) - Cyclone for air and powder re-circulation (blue) - Powder filter with Telemecanique frequency inverter - Silent piston compressor (used) NUAIR + HERTZ dryer - Silent piston compressor, brand Nuair, model AIRSIL 2, 5.5hp, 270L tank, 640L/min, 952 hours of use, year 2020 - Air dryer, brand Hertz, model HRD 40, single phase 220V *Installation dismantled and in storage at our premises. Sold as is.

Condition: good (used), Year of construction: 2013, Central control WAGNER automatic powder spraying booth (pre-treated parts), incl. WAGNER SuperCenter powder supply unit (2013) Manual powder spraying system (small series, mixed colors) with guns Cyclone separator Block gas-heated water drying furnace. drying and baking furnace (incl boiler) The powder-coated workpieces are fired in a natural gas-heated powder firing furnace Cooling after water drying Cooling after powder firing Handling system Automatic wastewater treatment capacity: max.: ~ 1 m³/h Nsdpfxjyhbdfe Afaswf

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ Nwsdpfx Asfzccnsfajf 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ Nedpfeflk Awox Afaewf 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Nsdpfxsfz U Nbj Afajwf Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Nwodpfxefx Nfmj Afaef Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2019, condition: ready for operation (used), A complete painting system on two levels for engine manufacturing including all necessary aggregates and components is available. Workpiece carriers in the system: 118, cycle time: approx. 49s, complete throughput time: 97min, max. production capacity with 3 shifts: 258000/year, overall system dimensions X/Y: approx. 26000mm/9000mm. 1) Adsorption dryer. 2) Steam humidifier Carel. 3) Two- and three-stage filter boxes. 4) Compressor technology. 5) Air dryer Hygrex. 6) Robot with control cabinet and spray gun. 7) Paint dosing pump. 8) Paint preparation and cleaning. 9) Osmosis system. This is a complete painting system using a robot from cleaning to the drying process. Documentation available. An on-site inspection is possible. Nodpfsytgpqjx Afaswf

Condition: used, Year of construction: 2011, Powder coating line AABO Andersen Nwsdpfoyrnh Esx Afasf

Condition: new, Year of construction: 2025, TPO0909E powder coating oven Working dimensions (mm): 900 (W) x 900 (D) x 1600 (H) SPECIFICATION: * Power consumption: 9 kW. Equipment: * Rod for hanging details * Convection (Equal temperatures throughout the oven), * Locks for safe opening and closing, * Maximum operating temperature: 230°C. Nwsdpfxjfgnyts Afajf TQ0906 powder coating booth Working dimensions (mm): 900 (W) x 600 (D) x 1400 (H) SPECIFICATION: * Power consumption: 1,6kW * Air capacity: 3200m3/h, * Hermetic lamp: 1pcs. * Automatic filter cleaning system * The cabin is equipped with a set of pneumatic quick connectors * Cartridge filter: 1 pcs * Paint recovery container Oven, cabin in stock, ready for shipment. CHOOSE BUMEX SP. Z O.O. Very high quality of the machines offered on the market. Professional advice and service. Warranty. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our clients. All products of the brand BUMEX SP. Z O.O. have WE certificate. We offer our own transport - prices are agreed each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions. Please do not hesitate to contact us.

Condition: new, Year of construction: 2025, The BUMEX SP. Z O.O.company presents a powder coating booth. working dimension: 4500x2300mm Nwsdsd S N Scepfx Afajf 6 x polyester filter Automatic filter cleaning with adjustable range from 10-1200 sec. 2 x fan 2.2 kW, 10,500 m³/h (Total 21,000 m³/h) 2 x LED lamp Delivery time 14-21 days Our cabins are characterized by a very high quality of workmanship, safety of use and selection of cabin parameters to the existing building. We advise on the selection of paint booths, dust extraction systems, exhaust systems and industrial recuperation. CHOOSEBUMEX SP. Z O.O. Very high quality of machines offered on the market. Professional advice and service. Guarantee. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our customers. All BUMEX SP. Z O.O. are WE certified. mdvncpiz We offer our own transport - prices are set each time for a given offer. We issue VAT invoices. e.g Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Feel free to contact us.

Condition: new, Year of construction: 2025, type of input current: three-phase, overall weight: 450 kg, total height: 2,500 mm, total width: 4,200 mm, Equipment: lighting, The BUMEX SP. Z O.O. company presents a powder coating booth. Working Dimension: 4 000 x 2 200 mm Nwodpfx Afshfwy Hjaef 5 x filter Automatic filter cleaning with an adjustable range from 10-1200 sec. Fan 2 x 2,2 kW, 9.500 m³/h=19.000m³/h 2 x LED lamp Delivery time 14-21 days Our cabins are characterized by a very high quality of workmanship, safety of use and the selection of cab parameters to the existing building. We advise on the selection of spray booths, dedusting systems, exhaust systems and industrial recuperation. CHOOSE BUMEX SP. Z O.O. Very high quality of the machines offered on the market. Professional advice and service. Guarantee. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our clients. All products of the brand BUMEX SP. Z O.O. have WE certificate. We offer our own transport - prices are agreed each time for a given offer. We issue VAT invoices. E.g. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please do not hesitate to contact us.

Condition: new, Year of construction: 2025, Powder coating system for large parts All dimensions and other changes can be taken into account in the design and planning The offer includes the following components: Cabin for chemical pretreatment (3 zones) with spray ring Walk-in coating cabin Powder gun Powder firing oven Manual conveyor system Electrical control Example: (all sizes can be changed individually) Space requirement: 30 x 15 meters Part size: L= 6,200mm W= 2,300mm H= 2,000mm Walk-in cleaning cabin including automatic spray ring 1 Dimensions of the cabin Length 9,000 mm Width 4,500 mm Height 3,400 mm 2 Dimensions of the tanks Length 1,200 mm Width 850 mm Height 1,000 mm 2 Dimensions of the cabin complete Length 9,140 mm including tanks width 5,580 mm height 4,200 mm Walk-in coating booth, manual coating 1 Dimensions of booth length 9,000 mm width 4,500 mm height 3,400 mm 2 Dimensions of booth including extraction length 10,125 mm width 4,500 mm height 3,400 mm powder firing oven 1 Internal dimensions length 6,500 mm 2 Internal dimensions width 2,500 mm 3 Internal dimensions height 2,950 mm 4 External dimensions including thermoblock length 7,600 mm 5 External dimensions including thermoblock width 2,800 mm 6 External dimensions including thermoblock height 3,100 mm Manual conveyor system The conveyor system consists of made of: 1. Support structure, consisting of steel elements, 120x120m/ IPE 160 2. Rollers - No. 9862 GL 4 pieces 3. Pneumatic accessories for locking - unlocking during transfer 4. Rail system - No. 9060 - 234 meters 5. Rollers - No. 9862 GLHT 24 pieces 6. Connecting pieces - No. 9061M 34 pieces 7. Fastening clamps - No. 9067/180 234 pieces 8. Stoppers - No. 9169 21 pieces 9. Movable locking - No. 9601 VM 6 pieces 10. Rigid locking - No. 9601 VF 17 pieces Electrical control The electrical control unit is divided into electrical and automatic control. With it we can control all the units mentioned above and consists of: - PLC - Touch screen 5" color -easy view- - Modem - Thermo-magnetic switch. Fuse (Telemechanique, Siemens, ABB). - Cables, supports, pipes, etc. Njdpfx Aobhh Awefaewf

Condition: new, Year of construction: 2026, BUMEX Sp. z o.o. | Industrial Powder Coating Technology A professional, compact industrial powder coating system designed for serial production and demanding workshop applications. Engineered with a strong focus on process stability, structural durability and premium coating quality. A complete solution ready for immediate operation in professional powder coating facilities. Scope of Supply ✅ Powder Coating Curing Oven 1200 × 1500 × 1800 mm ✅ Powder Coating Spray Booth with Filtration System 1400 × 800 × 1400 mm POWDER COATING OVEN — BUMEX INDUSTRIAL STANDARD Technical Data Working dimensions: 1200 × 1500 × 1800 mm Total power: 18 kW Key Construction Features ✔ stainless steel front frame preventing paint peeling at the door-to-frame contact area — long-term durability and premium appearance, ✔ excellent temperature uniformity thanks to an efficient air circulation system ensuring stable curing without overheating or cold zones, ✔ heavy-duty industrial construction designed for continuous operation, ✔ 4 patented BUMEX safety locking systems guaranteeing perfect door pressure, chamber tightness and maximum operator safety, ✔ internal loading trolley and external trolley for ergonomic handling, ✔ optimised airflow circulation ensuring repeatable curing quality. Result: fast heating, stable temperature control and perfectly cured powder coating finish. POWDER COATING SPRAY BOOTH Technical Data Working dimensions: 1400 × 800 × 1400 mm Fan power: 1.5 kW Airflow capacity: 6500 m³/h Premium Equipment ✔ construction made from powder-coated galvanised steel panels providing high corrosion resistance, ✔ 2 × 100% polyester filters mounted in TWIST system — fast installation and removal without tools, ✔ automatic filter cleaning system maintaining constant performance, ✔ highly efficient and low-noise industrial extraction fan, ✔ stable airflow ensuring effective powder capture, ✔ ergonomic working area for operator comfort. BUMEX Standard ✔ CE conformity, ✔ full technical documentation, ✔ manufacturer warranty, ✔ warranty and after-sales service, ✔ professional technological consulting. Commercial Terms ✔ own transport — individually quoted, ✔ VAT invoice provided, Nsdshd Nraopfx Afaswf ✔ customised configurations and dimensions available. BUMEX Sp. z o.o. We design industrial equipment built for long-term reliability, safety and predictable performance.

Condition: new, Year of construction: 2026, warranty duration: 12 months, total width: 2,300 mm, total length: 1,300 mm, total height: 2,450 mm, type of input current: three-phase, Powder paint booth, suction wall TQ2020 Working dimensions (mm): 2000 (width) x 2000 (height) x 400 (depth) Overall dimensions (mm): 2300 (width) x 2450 (height) x 1300 depth Nwodpfx Asd S N Szefasf SPECIFICATION: • Fan power 2.2 kW, • Efficiency 10,500 m³/h, • 3 x 100% polyester filter • Filtration degree at the level of 99.9%, • Control panel IP 66, • Automatic filter cleaning • Hermetic lighting IP 65. • Paint tank Booth available immediately (Stock status) CHOOSE BUMEX SP. Z O.O. Very high quality machines among those offered on the market. Professional advice and service. Warranty. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our customers. All BUMEX SP. Z O.O. brand products are EC certified. We offer our own transport - prices are set each time, for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please contact us.

Condition: new, Year of construction: 2025, Oven for powder coating Nsdpfx Aofgnyqofaowf Working dimensions (mm): 1500 (W) x 2500 (D) x 1800 (H) Technical data: • Power consumption: 36 kW. Equipment: • NIKO rail system • Convection (Equal temperature throughout the oven), • Locks for safe opening and closing, • Maximum operating temperature: 230°C. CHOOSE BUMEX SP. Z O.O. Very high quality of the machines offered on the market. Professional advice and service. Warranty. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our clients. All products of the brand BUMEX SP. Z O.O. have WE certificate. We offer our own transport - prices are agreed each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please do not hesitate to contact us.

Condition: new, Year of construction: 2025, conveyor belt length: 3,000 mm, Powder coating set Powder Coating Oven 1500 x 3000 x 1800 mm Powder Coating Booth 2800 x 2200 mm Wagner Paint Applicator Oven/Dryer Technical Specifications: Working dimensions: 1500 x 3000 x 1800 mm with NIKO 24.000 overhead rails • Power consumption: 43 kW • Maximum operating temperature: 220°C Equipment: • NIKO 24.000 overhead rail transport • Convection (Even temperature throughout the oven) • 2 x fans for air circulation • Safety locks for opening and closing. Powder booth: •Working dimensions: 2800 x 2200 mm •Fan power: 2.2 kW •Fan capacity: 10,500 m³/h •Very quiet operation •Automatic filter cleaning •LED lighting Wagner Sprint 2 electrostatic applicator CHOOSE BUMEX SP. Z O.O. Very high quality machines among those offered on the market. Nwedpfxsguku Ue Afaof Professional advice and service. Warranty. Warranty and post-warranty service. Full technical documentation. 100% customer satisfaction. All BUMEX SP. Z O.O. products are EC certified. We offer our own transport – prices are determined on a case-by-case basis, based on each offer. We issue VAT invoices. Short lead times! Machines in various, customized configurations and sizes are available! Contact us today.

Condition: new, Year of construction: 2025, total length: 1,600 mm, total width: 2,200 mm, total height: 2,350 mm, overall weight: 250 kg, type of input current: three-phase, working width: 1,400 mm, Paint booth, paint wall, suction TQN1414 With right or left side discharge. Working dimensions (mm): 1400 (width) x 1400 (height) x 800 (depth) Overall dimensions (mm): 1600 (width) x 2350 (height) x 1250 depth SPECIFICATION: • Fan power 1.5 kW, • Efficiency 6,500 m³/h, • 2 x 100% polyester filter • Filtration degree at the level of 99.9%, • Control panel IP 66, • Automatic filter cleaning • Hermetic lighting IP 65. • Paint tank Cabin available immediately (Stock status) SELECT BUMEX SP. Z O.O. Very high quality machines among those offered on the market. Professional advice and service. Warranty. Warranty and post-warranty service. Full technical documentation. Nwjdpfxed S N I Nj Afaef 100% satisfaction of our customers. All BUMEX SP. Z O.O. brand products have an EC certificate. We offer our own transport - prices are set each time, for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please contact us.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Due to a production relocation, our extremely well-maintained, scarcely used powder coating system, manufactured in 2021/2022, is now for sale. The system is a fully operational complete unit and has only been used on a limited basis and in single-shift operation over the past 4 years, operated exclusively by a single trained person. Components: - Water treatment: HUMMEL - Surface cleaning: WIELAND (interior dimensions 1,200 x 1,200 x 700 mm) - Powder coating: GEMA Nedpfxoylmcho Afajwf - Curing oven: WIELAND - Extraction system: PLYMOVENT - Accessories: Transport racks (6x) 1,200 x 1,200 x 700 mm (interior dimensions) If you have any questions or need further information, please feel free to send us a message or call us.

Condition: new, Year of construction: 2026, machine/vehicle number: A1481630, Complete finishing line Nodpfx Asbqh R Tjfaowf max. product dim. lenth = 2000mm, width = 750mm, hight = 1000mm max. weight 50kg (higher weight possible) speed up tp max. 1m/min. (higher speed possible) Please contact us for more information.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, total length: 90,000 mm, travel distance X-axis: 2,600 mm, travel distance Y-axis: 4,000 mm, table length: 4,000 mm, table width: 2,600 mm, TECHNICAL DETAILS Travel distance X-axis: 2,600 mm Travel distance Y-axis: 4,000 mm Table length: 4,000 mm Table width: 2,600 mm Maximum glass weight: 260 kg Glass thickness: 4 - 10 mm MACHINE DETAILS Cycle time: 10 pieces/hour Cabin type: SUP-E2-D107/20000 + "D" Total production line length: 90 m Installed power: 1,100 kW EQUIPMENT Loading station with lifter Vertical inlet conveyor WM Vertical washing machine with dryer Vertical inspection conveyor with activation section Tilting table with horizontal transport and vertical inspection Pre-heating section Powder section with belt cleaning Cleaning conveyor Cooling section Tilting table with vertical and horizontal transport Nwodpfeyk S Uyox Afasf Vertical inspection station Unloading station Electrical distribution Deionized water system for the washing machine supply The ovens that may be visible in the pictures are not included in the scope of sale and delivery.