Used Peletto Smp-250 for sale (9,914)

Condition: good (used), We offer for sale a Heraeus heating and drying oven. Heraeus heating and drying oven manufacturer HERAEUS Type: 6200 condition: Used in good condition air mixing oven: up to 250°C Internal volume: 180 liters temperature controller and timer air mixing voltage: 2800watt 1 phase 230volt 50Hz 12.3A IP20 External housing: width 800 mm, length 890mm, height 810 mm. Internal dimensions: width 510 mm, length 550 mm, height 650 mm weight: 100kg Dsdpfevzqyfex Akcskl

Condition: used, Year of construction: 1995, functionality: fully functional, We will be selling our finger jointing line at the end of 2025/beginning of 2026, starting from the vacuum destacker (photo 1) up to the finger joint press including the cross-cut saw (photo 11), with only the defect cross-cut saw not for sale. Finger jointing line, model HK 250 L, year 1995 (see photo 7), with upgrades in 2013: control system and finger joint press were replaced. Glue application is performed using the bottom-mixing method with glue rollers (see photo 6). The control system for the entire line and the press was renewed by Somako. Production with this line will continue until the end of 2025, therefore it can be inspected in operation at any time. The price depends on whether the entire line or only parts of it are purchased. Individual components can also be sold as spare parts. Djdpfew Uf Tkjx Akcjkl

Condition: used, Year of construction: 1979, machine/vehicle number: Res BS, Demag PK2 Chain Hoist Crane Lifting Unit 250kg / 500kg Approx. 40 units available!!! 250kg / 0.25t rated load / lifting capacity – single fall – 500.- 500kg / 0.5t rated load / lifting capacity – double fall – 600.- With 2 lifting speeds, lifting height approx. 3-4m Complete with pendant control and load hook Total weight approx. 40kg, 380V 50Hz connection Top condition, fully functional. Not a worn or used device! Connect and start operating. Comes from ongoing operations Dkodpfxjvzkyle Akcel Item location: 75053 Gondelsheim See pictures

Condition: refurbished (used), battery capacity: 500 Ah, battery voltage: 80 V, total height: 627 mm, total length: 1,025 mm, total width: 708 mm, Tested forklift battery for your forklift - 80V 4PZS 500Ah - DIN A + 1 year warranty + Includes Aquamatik filling system + Includes end cell connector & REMA 320 plug (other connectors can be installed upon request) + Capacity: min. 90-100% (C5 capacity protocol will be provided upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,025 mm Width 708 mm Height 627 mm Weight: approx. 1,210 kg Suitable for the following models and others: Linde E 16 P - 386-02 - side battery change Linde E 20 - 1252-01 Linde E 20 - 336-00 Linde E 20 - 387-00 Linde E 20 FLAT - 336-00 Linde E 20 L - 386-00 Linde E 20 R - 387-00 Linde E 25 - 1252-01 Linde E 25 - 387-00 Linde E 25 C - 387-00 Linde E 25 R - 387-00 Linde E 25 RL - 387-00 Linde E 25 S - 1276-00 Linde E 30 - 1252-01 Linde E 30 - 387-00 Linde E 30 - 387-00 - side battery change Linde E 30 / 500 - 387-00 Linde E 30 C - 387-00 Linde E 30 L - 387-00 - side battery change Linde E 30 R - 387-00 Linde E 30 RL - 387-00 Linde E 30 S - 1276-00 Linde P 200 - 370-00 Linde P 250 - 127-00 - vertical battery change Linde P 250 S - 127-05 Linde P 250 SWB - 5007-10 - side battery change Linde P 250 SWB - 5007-10 - vertical battery change Linde W 20 - 127-00 Linde W 20 - 127-00 - vertical battery change Dkjdjwzvzyjpfx Akcel Linde W 20 - 127-06 - overhead battery change Linde W 20 - 5007-10 - side battery change Linde V 20 - 5007-10 - vertical battery change Linde W 30 - 5007-10 - side battery change Linde W 30 - 5007-10 - vertical battery change Toyota 7FBMF16 Toyota 7FBMF18 Atlet EH 25 Clark STE 20 Other common battery sizes available on request. Transport possible.

Condition: excellent (used), Stair Tensioner (28366) Clamping height 200 - 250 mm Dedpfx Aeln Ulajkcskl T grooves width 12 mm Clamping screw M 10 4 pieces available Weight 8,5 kg

Condition: good (used), Year of construction: 2001, spindle speed (min.): 2,500 rpm, Model Year: 2001 Chuck Diameter: 10" Number of Axes: 2 Dodpfsx N A Dwjx Akcjkl Length: 650 mm Swing Diameter: 650 mm Spindle Speed (RPM): 2500 Machinable Materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, PEEK

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, type of input current: three-phase, overall weight: 1,000 kg, input frequency: 50 Hz, nominal power (apparent): 250 kVA, type of output current: three-phase, Equipment: type plate available,

Condition: used, Vise jaw width 200 mm Jaw height 80 mm Dodsdd Tpispfx Akcekl Plate: Width below 250 mm Less than 500 mm length Opening width 250 mm Weight 72 kg

Condition: excellent (used), Year of construction: 1981, overall weight: 64,000 kg, Energy of blow: 7 000 kgm Ram weight: 2 380 kg. Max. ram stroke: 950 mm Number of strokes per minute: 100 Dedpfx Akjlnk Tyscokl Total weight: 64 ton Anvil weight: 47 ton

Condition: used, TECHNICAL DETAILS - Axes : 5 - Max. tool diameter : 150 [mm] - Max. tool length with manual loading : 300 [mm] - Max. tool length with auto loading : 140 [mm] - Max. tool weight : 25 [kg] WORKHEAD (A-AXIS) - Attachment : ISO 50 - Strokes X/Z : 360 / 300 [mm] - Stroke : 360 [°] - Max. speed : 800 [r/min] WHEELHEAD (B-AXIS) - Attachment : HSK-E40 - Stroke Y : 200 [mm] - Stroke : -30 / +180 [°] - Max. wheel diameter : 125 [mm] - Max. speed : 20.000 [r/min] - Power : 7 [kW] WHEEL MAGAZINE - Number of positions : 4 TOOL MAGAZINE - Type : using the linear axes, with Schunk collet - Tool length : 40 – 140 [mm] - Tools Ø4-6 per pallet : 200 - Tools Ø6-10 per pallet : 96 - Tools Ø6-16 per pallet : 54 Djdpsuhbzuefx Akcskl ELECTRICS - Main voltage : 400 [V] - Total power : 19 [kW] DIMENSIONS - Floor space : 2.200 x 3.350 [mm] - Height : 2.600 [mm] - Weight: 2.500 [kg] EQUIPMENT - CNC : NUM AXIUM Power P2 - Software : Easygrind 6.08 - Linear scales upon X/Y/Z : HEIDENHAIN - Spindle cooling unit - Coolant tank with pump : 10 [bars] * with retractable nozzle - Mist suction unit : ELBARON RON/A 100 DV - Airblow upon tool - Fire estinguisher (to be checked buy the buyer through a specialist) - Number of wheel supports : 12 - Number of pallets : 4 - 1 collet chuck ISO50 with auto clamping - 1 collet chuck ISO50 with manual clamping, capacity Ø : 32 [mm] - 1 collet chuck ISO50 with manual clamping, capacity Ø : 20 [mm] - 1 MASTER calibration device for self-calibration of axes and probe

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, clamping force: 2,451 kN, screw diameter: 55 mm, injection weight: 618 g, No minimum price - guaranteed sale to the highest bidder!\n\nENGEL injection moulding machine with E-PIC Z robot!\n\nTECHNICAL DETAILS\nClamping force: 250 tons\nScrew diameter: 55 mm\nShot weight: 618 g\n\nMACHINE DETAILS\nMounting plate: 1,050 mm x 900 mm\n\nEQUIPMENT\nEngel E-PIC Z robot (year 2017)\nEnlarged mounting plate\n3x tie bars\n3x air valves\n\nNote: When purchasing multiple items from the same location (see offers below), you will be charged the more favourable costs for dismantling and loading. Djdoy Ewgfspfx Akcokl

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, clamping force: 2,451 kN, screw diameter: 70 mm, displacement volume: 1,000 cm³, injection weight: 901 g, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 250 tons Screw diameter: 70 mm Shot volume: 1,000 cm³ Dedpfxoy Ewd Rj Akcskl Injection weight: 901 g MACHINE DETAILS Enlarged mounting platen: 1,050 x 900 mm Note: When purchasing multiple items from the same location (see offers below), the more favorable costs for dismantling and loading will be waived accordingly.

Year of construction: 2010, condition: repair required (used), functionality: limited functionality, controller model: MTT AutoFab, inner dimension height: 250 mm, laser power: 400 W, machine/vehicle number: SLM2501004, laser type: fiber laser, Equipment: dust extraction, No reserve price – guaranteed sale to the highest bidder! Note: The machine is in visually clean condition. It is also technically complete and the laser has been replaced by the manufacturer. However, the printer has limited functionality with regard to focus quality at the edge areas, which is presumably due to the optics and therefore requires adjustment or repair. TECHNICAL DETAILS Process: Selective Laser Melting (metal 3D printing) Laser: IPG fiber laser (replaced by manufacturer) Laser power: 200 W Total power: 400 W Maximum power: 900 W Adjustable output power: 10 - 105 % Long-term output stability: ± 3 % Beam quality: < 1.1 M² Wavelength: 1,075 ± 5 nm Spectral linewidth FWHM: < 3 nm Maximum modulation frequency: 50 kHz Build height: 250 mm Shielding gas operation: Argon/inert gas Cooling: water-cooled Cooling temperature: < 30 °C MACHINE DETAILS Laser type: YLR-200-WC Electrical voltage: 85 / 240 V AC Current: 15 A Laser hours: 0.1 h Pump runtime: 2,644 h Power-on hours: 5,017 h Heating power: 1,000 W Nominal temperature: 18 - 30 °C Air pressure: 6 bar Ambient temperature: 0 - 45 °C Dimensions & Weight Dimensions (W x D x H): 3U 19" rack Machine weight: 60 kg EQUIPMENT • Powder System PSH 100 Dodpfxjy H Hxys Akcskl • Extraction and filtration system • Chiller unit • 5x powder bottles (5 L) • 6x substrate plates • 10x filter elements (H13) • 26x wiper lips • Spare sieves • Protective suits • Cleaning wipes for optics (F-theta) • Various small parts & spare components

Condition: like new (used), Year of construction: 2012, input voltage: 400 V, 2 X Zentner Washer 250 - Screen Cleaning Units Unit 1 Unused and New Condition $20,000.00 USD Unit 2 Used - Excellent Condition $16,000.00 USD Dkodpfx Ajv Dpy Nskcel

Condition: used, Year of construction: 2024, load capacity: 25,000 kg, lifting height: 3,100 mm, total length: 8,880 mm, · Lastschwerpunktabstand: 1200 mm · Lastabstand, Mitte Antriebsachse zu Gabel: 1070 mm · Achsabstand: 4250 mm · Achslast, Last vorn: 15500 kg · Achslast, Last hinten 53800 kg · Achslast, vorn ohne Last 17400 kg · Achslast, hinten ohne Last 4100 kg · Spurweite, vorn / hinten 2200/2140 mm · Reifendruck 1,0 MPa · Mastneigung, α = vorwärts / β = rückwärts: 5/10° · Sitzhöhe 2150 mm · Höhe beim Neigen der EGO-Kabine / OHG 3800 mm · Breite beim Neigen der EGO-Kabine / OHG 3700 mm · Breite über Gabelarme, min. / max. 2700/800 mm · Seitenverschiebung ± bei Breite über Gabeln 557/1585 mm · Min. Arbeitsgangbreite für 90° Stapelung 9550 mm · Wenderadius 5875 mm · Wendekreis innen 550 mm Dkjdey Raw Dspfx Akcjl · Betriebsdruck für Hydraulik 22,0 MPa · Hydrauliköltank, Volumen 330l · Kraftstofftank, Füllmenge 375l · AdBlue-Tank, Füllmenge 35l · Kraftstoffsorte des Motors Diesel, 4-Takt · Leistung ISO 3046 / bei Drehzahl 185/220 kW / rpm · Drehmoment ISO 3046 / bei Drehzahl 1160/1200 Nm / rpm · Anzahl Zylinder / Zylinderhubraum 6 / 7700 cm³ · Kraftstoffverbrauch, normale Fahrweise 8-11 l/h · AdBlue-Verbrauch, normale Fahrweise 3-5 % of diesel · Getriebe Typenbezeichnung des Herstellers: Dana TE17000 · Kupplung, Typ Drehmomentwandler · Getriebe, Typ Hydrodynamisches Lastschaltgetriebe · Anzahl der Gänge, vorwärts / rückwärts 3/3 · Generator, Typ / Leistung AC/3080 W · Startbatterie, Spannung / Kapazität 2x12 / 145 V/Ah · Antriebsachse, Hersteller / Typ Kessler D91 / Differential und Nabenvorgelege · Hubgeschwindigkeit Ohne Last (m/s) 0,3 · Hubgeschwindigkeit Bei Nennlast (m/s) 0,32 · Senkgeschwindigkeit Ohne Last (m/s) 0,38 · Senkgeschwindigkeit Bei Nennlast (m/s) 0,38 · Fahrgeschwindigkeit, V/R Ohne Last (km/h) 24/24 · Fahrgeschwindigkeit Bei Nennlast (km/h) 23/23 · Steigfähigkeit, max. Ohne Last (%) 60 · Steigfähigkeit, Mit Nennlast (%) 29 · Steigfähigkeit bei 2 km/h Ohne Last (%) 41 · Steigfähigkeit bei 2 km/h Mit Nennlast (%) 22 · Zugkraft Max. (kN) 173 · Geräuschpegel, innen LpAZ*, EGO-Kabine (dB(A)) 72 · Geräuschpegel, außen LWA (dB(A)) 109

Condition: used, Year of construction: 2011, Vertical Twin-Spindle Turning Center - Siemens 840 D CNC control - VSC 400 Duo machine bed - 2 x disc turrets, 12 station, dia. 40 mm, driven Dsdpfxsy N Snxs Akcskl - 2 x additional drilling and countersinking stations - Open workpiece transport system - Transfer and turning unit - Interface for an external handling system - Central high-pressure coolant supply with pump, 70 bar - Air blow-off for pick-up unit and clamping devices - Workpiece measurement system - Tool monitoring - Emag network option - Sister tool management system Swing diameter: 260 mm X travel: 860 mm Z travel: 200 mm Main spindles: 2 Max spindle speed: up to 4,500 rpm Spindle distance: 1,055 mm Main drive: 2 AC asynchronous motor 60% / 100% duty cycle: 39 / 28 kW Max torque: 460 Nm Rapid traverse (X / Z): 45 / 30 m/min

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 161 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 580 mm, number of axes: 7, This 7-axis Nakamura Tome WY-250 was manufactured in 2007. It features a twin spindle configuration with Y-axis capabilities on both turrets, allowing for versatile machining. The machine includes a maximum Z-axis travel of 580 mm and Y-axis travel of mm. If you are looking to get high-quality turning capabilities, consider the Nakamura Tome WY-250 horizontal turning machine we have for sale. Contact us for further details. • Travels: • X1: 160.5 mm • X2: 165 mm • Z1/Z2: 580 mm • Y1: mm • Y2: / mm • Included tooling: • 4x external tool holders • 4x tool holders for simultaneous mounting of 2 opposite tools • 6x boring bar holders • Driven toolholders (HEIMATEC): • 4x radial • 4x axial • Collet holders (Bellegrandi): • Main spindle: MSCNT70-A6” for BA & BD collets size 70, complete with related cups • Counter spindle: MSCTNR70-A5” for BA collets size 70, complete with spring ejector Additional equipment • IEMCA Master 880/33/P bar feeder (2003), S/N: 0200347S03 • Application: Automatic bar feeder for CNC lathes • Capacity: • Max bar length: 3300 mm (to be confirmed) Dksdsy N Spcopfx Akcjl • Max bar diameter: up to Ø80 mm (model family reference) • Guide channels: Ø65 mm included; Ø70 mm currently installed and can be supplied with the machine • Features: Automatic loading/feeding, synchronization with lathe cycle, compatible with spindle liner/guide channel systems, heavy-duty frame • Condition: Currently stopped/not in production; reported functional; available for inspection by appointment • Note: Sold together with the Nakamura Tome WY-250; some accessories/guide channels may belong to the lathe setup • Complete set of hand jaws (“Manine”) for parts unloader (parts unloader itself not specified) Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, Cutting height ~ 80 mm Chain width 300 mm weight ~ 1.200 kg Dkjdpfx Ajy N D R Sjkcol Compact Maka type V 250 J multirip saw for ripping and trimming wood with several saw blades. Including dismantling and loading. Fixed loading date: 15.06.2026.

Condition: used, Vibratory bowl feeder / Sorting device / Bowl feeder / Vibratory feeder RNA Vibratory bowl, sorting device / Screw feeding system with vibratory feeder for screw technology Feeding system, feeder device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Year of manufacture: approx. 2000 Bowl diameter (bottom): 300 mm Bowl diameter (top): 350 mm Dkedoy N Dvbjpfx Akcel Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Total height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6,000 rpm Power supply: 230 Volt, 50 Hz - The feeder was used for feeding automotive blade fuses Installation space required Ø x H: 420 x 390 mm Weight: 52 kg Good condition A bowl feeder always consists of two essential components. 1) Sorting bowl, in which the parts are oriented 2) Drive unit, which causes the sorting bowl to vibrate by mechanical oscillations, setting the parts in motion.

Condition: excellent (used), Year of construction: 2006, Heller MCH 250 4 axes Year of manufacture: 2006 Control: Siemens 840 D Dksdpfjy Nyckox Akcsl Spindle speed: 12,500 rpm Travel distances: X: 800 mm Y: 800 mm Z: 800 mm Pallet size: 630 x 630 mm Max. tool length: 600 mm

Condition: ready for operation (used), GMN TSE 80 x 250 - 6007 spindle SN: R307943 with Siemens 1LA5073-4AB95-Z motor SN: EJ797957201009, used, in good maintained condition, 100% functional, scope of delivery as per photos. Dkodpey Npdwjfx Akcel

Condition: new, Brinkmann STC 250 / 720 MVXZ + 459 submersible pump 250 L / min No. 001, serial number as per photo, unused, 100% functional, scope of delivery as per photo ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Dkjdpfx Akji D Hkbocel

Condition: ready for operation (used), GMN TSE 80 x 250 - 6007 spindle SN: R307942 with Siemens 1LA5073-4AB95-Z motor SN: EJ797957201007, used, in good condition, 100% functional, scope of delivery as per photos. Dedpsy Npdqjfx Akcekl

Condition: ready for operation (used), Heidenhain ROD 250 18000 . 21311601 Serial number: 3654376C / L3, fully refurbished with 6 months warranty, 100% functional, delivery as per photos. Dodpfx Aey Nqn Djkcokl

Condition: ready for operation (used), Heidenhain TE 400 control panel ID: 250 517 SN: 4648841, used, in good condition, 100% functional, delivery as shown in the photos. Dsdpfx Aksy Nqtyecskl