Used Multi Needle Injector for sale (5,477)

Condition: excellent (used), total length: 6,000 mm, total width: 2,400 mm, total height: 750 mm, color: blue, Operating conditions: The industrial trailer is designed for use on level, paved surfaces in internal transport operations. Multiple trailer operation: The trailer components are not designed (without a coupling device) for combined operation with multiple trailers. Payload: The industrial trailer can carry loads up to a maximum of 25 t at 6 km/h with evenly distributed loading (surface load) between the axles. Point or line loads are only permissible upon notification. Base frame: The base frame of the industrial trailer consists of a robust welded construction made of profile steel. Loading platform: Dimensions are approx. 6000 x 2400 mm. Loading height approx. 750 mm. The platform is covered with softwood planks and bordered with all-round edge protection. Steering: Four-wheel axle pivot steering, drawbar can be raised, detached, and swapped from front to rear. Drawbar eye height at towing vehicle approx. 285 – 775 mm (other heights only possible upon notification), drawbar eye according to DIN 74054, diameter 40 mm, drawbar drop safety device according to UVV. Chassis: Both axles of the industrial trailer are steered. Solid elastic rubber tires approx. 559 x 356 mm, wheel hubs with tapered roller bearings and long-life grease lubrication. Paintwork: Hfjdexrtb Nopfx Aa Eoi Finish in RAL 5002 ultramarine blue. Additional equipment: Two lashing rods made of round steel are welded vertically into the outer side frames on each longitudinal side of the industrial trailer. Rental or sale EU-wide.

Condition: excellent (used), total length: 4,100 mm, total width: 2,100 mm, total height: 560 mm, color: blue, OPTIONALLY ALSO AVAILABLE WITH ROOF STRUCTURE! Operating Conditions: The trailer is designed for use on flat, paved roadways in internal company transport operations. Payload: 6 t at 6 km/h with evenly distributed load (surface load) on the loading area between the axles. Point or line loads are only permitted upon notification. Main Frame: Robust welded construction made of profile steel sections. Loading Area: Hodpsxrtgfsfx Aa Eefi Dimensions approx. 4100 x 2100 mm, loading height approx. 560 mm, equipped with phenolic resin-coated plywood panels. Bumpers at the ends of the frame. Steering: Four-wheel pivot steering, drawbar tiltable, non-reversible, and non-removable. Drawbar automatic safety lock according to UVV regulations. Chassis: Both axles steered, wheels with solid rubber tyres approx. 425 x 150 mm, wheel hubs with tapered roller bearing and permanent grease lubrication. Paintwork: Top coat RAL 5002 ultramarine blue. Miscellaneous: - Collision guards at the frame ends made of drop-shaped half-shells. - All-round anti-slip protection, approx. 25 mm high. - Side underrun protection at the height of the diagonal bar. - Pin coupling with captive bolt, bolt with spring safety, diameter 30 mm at the rear end. - Double-acting wheel chock with chain. - Two rear reflectors at the rear end. - Prepared for roof structure.

Condition: like new (used), total length: 5,000 mm, total width: 2,400 mm, total height: 930 mm, color: blue, Operating conditions: The trailer is designed for use on level and paved surfaces for internal plant transport. Towing vehicle type designation: unknown Load to be transported: unknown Multiple trailer operation: The trailer components are not designed for operation in combination with multiple trailers (without a trailer coupling). Payload: 40t at 6 km/h and evenly distributed load (surface load) across the loading platform between the axles. Point or line loads are only permitted upon notification. Main frame: Robust welded construction made from profile steel sections. Loading platform: Size approx. 5000 x 2400 mm, loading height 930 mm, platform covered with timber planks, all-round edge protection. Hodpoxrtluefx Aa Eofi Steering: All-wheel steering on 4 pendulum axles, tow bar can be raised, removed, and repositioned from front to rear. Hitch height on towing vehicle approx. 670 mm (other hitch heights only permitted upon notification). Drawbar eye according to DIN 74054, diameter 40 mm. Track rods with adjustable ball joints. Diagonal or towing rods adjustable and fitted with low-maintenance joint bearings. Drawbar safety lock according to accident prevention regulations (UVV). Undercarriage: 4 steered pendulum axles (2 steered axle lines) to ensure even load distribution on the wheels. Wheels with solid elastic rubber tires approx. 559 x 305 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paint finish: Top coat RAL 5002 Ultramarine Blue. Additional equipment: 2 lashing bars on each long side. For rental or sale EU-wide.

Condition: used, Year of construction: 2001, Operating hours: 73075023 Clamping force: approx. 200 t Number of components: 2 Mold installation height: approx. 310 / 760 mm Opening stroke: approx. 320 / 575 mm Tie bar spacing: approx. 560 × 560 mm Horizontal screw diameter: approx. 60 mm Vertical screw diameter: approx. 30 mm L/D ratio: 1 / 20 Core pull: 2 Hot runner zones: 20 Flow rate: approx. 190 l/min Frequency: 50 Hz Power supply: 3 × 400 V Hfodpfx Aezl S N Eea Eoi Pressure: approx. 190 bar Current 1: 214 A Current 2: 105 A Current 3: 109 A Current 4: 67 A Weight: approx. 10.8 t

Condition: excellent (used), Catalogue number 7959 TECHNICAL DATA - Track width: 250 mm - Shaft width: 250 mm - Maximum saw blade diameter for multi-blade saw: 350 mm - Saw blade bore diameter: 70 mm - Maximum cutting height for multi-blade saw: 120 mm - Table width with clearance: 830 mm - Table length: 1780 mm – Top section: - Kickback devices - Pressure roller, sliding, metal, smooth Hfsdpfx Aaezlp Sko Eji - Kickback devices - Pressure roller, sliding - Shaft with saw blades - Pressure roller, sliding, metal, 2 pcs – Bottom section: - Guide rail - Kickback devices - Track (caterpillar) - Electric body up/down adjustment - Manual adjustment of shaft with saw blades - Central lubrication - Infinitely variable feed speed adjustment - Feed motor 1.1 kW - Main motor 37 kW - Extraction port diameter: 170 mm - Overall dimensions (L/W/H): 2000x1500x2000 mm - Weight: 1850 kg ADVANTAGES – German-made – Used multi-blade saw, in very good condition Net price: 45,900 PLN Net price: 10,930 EUR depending on the rate of 4.2 EUR (Prices may change with greater fluctuations)

Condition: excellent (used), Catalog number 7805 TECHNICAL DATA - Track width: 340 mm - Roller width: 340 mm - Disc arbor diameter: 80 mm - Installed discs on upper shaft: 350 mm - Installed discs on lower shaft: 300 mm - Max cutting height: 200 mm - Min length of processed material: 700 mm – From above - 2 rows of kickback fingers - Smooth, slip, pressure shaft - Kickback fingers - 2 smooth, slip, pressure shafts - Saw shaft - 3 smooth pressure rollers – From below - Track conveyor - Saw shaft - Track conveyor - Infinitely variable feed speed adjustment - Main motors: 2 x approx. 55 kW - Feed motor: 3 kW - Electric up/down elevation of the main body - Manual adjustment of saw shafts - Central lubrication - Extraction port diameter: 2 x 200 mm - Dimensions (L/W/H): 2700 x 1800 x 2150 mm - Weight: approx. 5,000 kg ADVANTAGES – German-made – Double-shaft design – 2 x 55 kW motors – Used multi-blade saw, in very good condition Net price: 178,900 PLN Hsdpfxozlp R Ts Aa Ejfi Net price: 42,590 EUR (at 4.2 EUR exchange rate) (Prices subject to change with significant rate fluctuations)

Condition: excellent (used), Catalogue number: 7889 TECHNICAL DATA track width: 230mm shaft width: 230mm max blade diameter: 350mm / 400mm blade bore diameter: 80mm max cutting height with 350 / 400 blade: 115mm / 150mm table width (with clearance): 1200mm table length: 1900mm – from above: lock/blockers drive shaft, toothed shaft with saw blades 2 sliding/pressure rollers – from below: guide lock/blockers track 2 sliding rollers in the table feed speed adjustable manually feed motor approx. 2.2kW main motor: 30kW extraction nozzle diameter: 200mm overall dimensions (L/W/H): 2700x1800x2000mm weight approx.: 3000kg ADVANTAGES – Czech production – used multisaw – DTR technical documentation – very good condition Net price: 22,900 PLN Net price: 5,450 EUR Hfedozlp Rtspfx Aa Eei Net price calculated at an exchange rate of 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 2015, The machine will be delivered as shown in the photos, including the visible tool holders, etc. Hfsdpjzlqavofx Aa Esi

Condition: used, axle configuration: 3 axles, first registration: 05/2018, total length: 9,600 mm, total width: 2,550 mm, total height: 1,550 mm, suspension: air, tire size: 385/55R22,5, color: other, Year of construction: 2018, Equipment: ABS, = Additional Options and Accessories = - EBS Hfodpfxoylhghj Aa Eei = Notes = Number of axles: 3, Unladen weight: 6,100 kg, Gross weight: 37,000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Air suspension, ABS, EBS, Body year: 2018, Container positions: 2x20 + 1x30 + 1x40, Extendable chassis: Front / rear, Extendable length: 52, Axle brand: BPW = Further Information = General Information Cab: Day cab Registration: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual Axle configuration Tire size: 385/55R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; left tire tread: 7 mm; right tire tread: 5 mm Axle 2: left tire tread: 4 mm; right tire tread: 7 mm Axle 3: left tire tread: 8 mm; right tire tread: 8 mm Weights Unladen weight: 6,100 kg Payload: 30,900 kg Gross vehicle weight: 37,000 kg Environment Emission class: Euro 0 Condition General condition: average Technical condition: average Visual condition: average Damages: none = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European makes, years, and price categories. Why buy from Kleyn Trucks? Simple! • Large, fast-changing inventory • Recognizable quality • Competitive prices • Reliable business relations • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration plates are quickly arranged • Expert technical services • The security of “recognized quality” • And more… Please visit our website for special offers and the complete stock list: Leasing through Kleyn Trucks is available in most European countries! Quickly calculate your leasing rate and submit a request through our website. Ask directly about our European warranty package.

Condition: not inspected (used), Year of construction: 1991, Torwegge multirip saw Chain width 250mm Hfedpeucnukefx Aa Esi cutting height 100mm Total connection 39kW

Condition: used, Costa multi-blade saw -Type Lince -max. cutting height 140mm Hfodpfxjvw Rple Aa Eei -motor 30kW

Condition: like new (used), Year of construction: 2008, Üstünkarli UDKP 160 Cutting height 160 mm Chain bed approx. 420 mm With spikes in the chain bed Hfjdpfxjucnudo Aa Eoi Including slat bush and spacer rings Main engine 75kW

Condition: used, Year of construction: 1998, LBL Brenta Oxia -max. cutting height 150mm -max. passage width 1000mm Hfedpevw Rnbefx Aa Esi -multi-blade saw with fixed saw attachment

Condition: used, axle configuration: 3 axles, first registration: 05/2006, total length: 9,650 mm, total width: 2,550 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2006, Equipment: ABS, = Additional Options and Accessories = - EBS = Notes = Number of axles: 3, Payload: 37450 kg, Tare weight: 5550 kg, Gross vehicle weight: 43000 kg, Chassis type: Full chassis, Kingpin size: 2 inch, Suspension type: Full air suspension, ABS, EBS, Body year of manufacture: 2006, Axle type: BPW = Additional Information = General Information Cab: Day cab Registration number: OJ-48-BV Drivetrain Fuel type: Diesel Transmission Transmission: Manual transmission Axle Configuration Tire size: 385/65R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Lift axle; Tire tread depth left: 5 mm; Tire tread depth right: 4 mm Axle 2: Tire tread depth left: 5 mm; Tire tread depth right: 4 mm Axle 3: Tire tread depth left: 9 mm; Tire tread depth right: 5 mm Weights Tare weight: 5,550 kg Payload: 37,450 kg GVW: 43,000 kg Environment Emission class: Euro 0 Condition Overall condition: moderate Technical condition: moderate Optical condition: moderate Damage: none = Company Information = Hfodpfxjzaz Ems Aa Eoi Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing inventory • Recognizable quality • A good price • Fair business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry through our website. Inquire directly about our European warranty package.

Condition: as good as new (ex-display), Year of construction: 2026, CNC Machining Centers Rover Multi Up M C S Working Area*: X = 3280 mm; Y = from 1580 to 1660 mm, depending on work conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 29 mm Workpiece Clearance*: Y = 1900 mm Axis Travel*: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Subdivision of the vacuum system into 2 working zones and 2 clamping zones in X. AUXILIARY VACUUM SYSTEM – 2 zones Allows clamping of workpieces using vacuum templates. Remote Control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Hjdpoy Ehrxsfx Aa Eofi Configuration 2 Compatible with the turret tool magazine with 16 positions and the side tool magazine with 12 positions. The tool magazines can also be retrofitted. Uninterruptible Power Supply (UPS) for machine PC. 6 ATS workpiece supports – 18 module carriers — 6 aluminium workpiece supports. The positioning of the workpiece supports is via linear guides with ball bearing slider blocks. Clamping is performed on the front and rear linear guides via pneumatic cylinders. Clamping is released by a push button located at the front of the workpiece support. — 18 module carriers, 132 x 132 x H 41.5 mm, with independent pneumatic clamping. The vacuum modules can be rotated in 15° increments on the module carriers; an ideal solution for shaped parts. — 18 covers for module carriers without template. SA (Set-Up Assistant) working table for tables up to 1550 mm. Supported manual positioning system with motion direction indicator and position indicator. — Sensors on each working table and along the X-axis of the working area. — Display of direction and position achieved for the carriage during positioning phase, mounted on each working table. According to the programmed configuration of the working tables, the system indicates the direction of movement for each working table and carriage, and confirms with a green LED and audible signal when the correct position is reached, with a tolerance of +/- 1.5 mm. Subdivision of the pneumatic system into 2 working areas in X. Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm Extraction hood with 12 NC-controlled positions for the 5-axis electrospindle. Flange for preparation of a 5-axis interpolating machining unit for mounting aggregates. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Drilling head BH 24 L Side tool magazine with 12 positions, integrated into the machine bed. Turret tool magazine with 16 positions, installed directly on the X machining unit. HSK F63 tool adapter, equipped with a long integrated flange, for saw blades on the 5-axis head. Saw blade 300 mm, for tool holder. Hi-Tech tool set Complete set of tools for the acceptance test Consisting of the following 9 parts Replacement of standard PC with a high-performance PC. Digital device for measuring tool length up to 130 mm diameter. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1. License WorkCenter suction cup proposal 5-Axis Simultaneous Material removal simulation 12-month warranty period Location: ex stock 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2026, minimax c 26g TERSA – Multi-functional machine for sawing, milling, surfacing, and thickness planing. The worktables made of heavy-duty ribbed cast iron and the base frame made of welded steel guarantee torsional rigidity and vibration-free operation. Unique in this performance class: smooth-running, anodized aluminum format sliding table with ball-contact system. Swiveling saw blade from 90° to 45°. Table extension with aluminum stop for panels and large workpieces. Planer unit with TERSA quick-change system with three planer knives. Helically toothed steel infeed roller for consistent workpiece feed during thickness planing. Arc milling guard for profiling, standard with fine adjustment. Milling unit with two speeds. Three independent motors for each working unit. Quality – Made in Europe. Equipment details Aluminum sliding table With a tried-and-tested ball-contact system Dust and dirt-resistant due to minimal contact point between ball and trapezoidal rail Permanently smooth running Saw unit adjustment Manual height and bevel adjustment of the saw unit via star handle Accurate positioning using a scale TERSA planer knife shaft No more adjusting and screwing Planer knife changes in seconds Self-locking Particularly quiet Table milling machine The milling unit has two speeds for flexible tool use. The machine is equipped with a fine-adjustable arc milling guard for profiling. With the aluminum sliding table, mortise and tenon joints can be easily cut. Thickness planer With the powerful thickness feed, workpieces up to 200 mm high can be planed. The helically toothed infeed roller guarantees consistent feed. The surfacing table can be folded inward to save space. Changing from surfacing to thickness planing is done in seconds with a single movement. Surfacing planer Standard with TERSA planer knife quick-change system Large-sized surfacing tables The surfacing and thickness tables made of cast iron guarantee the highest smoothness and vibration-free operation. Saw unit Saw can be swiveled up to 45° With saw blade 250 mm Ø with max. 80 mm cutting height A width of up to 500 mm can be cut on the parallel fence. Table extension With degree scale and aluminum stop for angled cuts on panels and large workpieces Scope of supply: Tersa quick-change planer knife shaft Anodized aluminum format sliding table Miter fence with a folding stop Multi-function fence for parallel cutting and surfacing Eccentric clamping arm Model: minimax c 26g TERSA Article no.: 5500027 Cutting length: 1200 mm Cutting width with parallel fence: 500 mm Max. crosscut width to the left of the saw blade: 1200 mm Saw blade inclination: 90 - 45 degrees Max. cutting height at 90°: 80 mm Hodpsdqzh Tjfx Aa Eefi Format sliding table length: 1140 mm Format sliding table width: 201 mm Format sliding table height: 70 mm Saw table length: 1024 mm Saw table width: 224 mm Saw table height: 900 mm Planer knife shaft type: TERSA Planer knife shaft diameter: 62 mm Number of planer knives: 3 pcs Surfacing table width: 260 mm Surfacing table length: 1040 mm Swivel angle of saw/surfacing fence: 90/45 degrees Max. material removal during surfacing: 3 mm Thickness table length: 450 mm Thickness table width: 260 mm Min. workpiece thickness: 3 mm Location: In stock 54634 Bitburg - immediately available -

Condition: used, machine/vehicle number: 008441, Max. panel width: 1100 mm Hfodpfx Aeyz Slbja Eoi Max. panel length: 5700 mm Max forward speed: 30 mt/min Number of shafts: 2 Motor Power: 90 KW

Condition: used, Used machine Equipment and technical data: High-performance multi-blade saw Heavy-duty cast iron construction Robust transport chain consisting of directly interconnected precision links Wear-resistant guide surfaces of the transport chain with an extremely low coefficient of friction Automatic chain lubrication Four-point saw arbor bearing for maximum stability Saw bushing with conical seat and self-centering function Four pressure rollers for precise cuts, even with thin workpieces Four slitting and anti-kickback finger rows Cutting height up to 110 mm with a 350 mm saw blade diameter Minimum cutting length 250 mm Clamping width of the saw bushing 300 mm Minimum and maximum saw blade diameter 200/350 mm Saw arbor speed 4200 rpm Feed rate 4-48 m/min Transport chain width 300 mm Saw bushing diameter (with 2 wedges 20 x 5 mm) 70 mm Work table height 750 mm Dust extraction port diameter 200 mm Hfodpfozk N Ucex Aa Eoi Air volume at 25 m/s 3500 m³/h Motor 25 kW Feed motor 1.1 kW With laser guide 1800 kg Sound emission 98.3 dB W (A) at idle without dust extraction In operation: 107.1 dB W (A) Workplace-related emission level 81.8 dB W (A) at idle without dust extraction In operation: 91.2 dB W (A) Availability: short-term Storage location: 63934 Röllbach

Condition: used, machine/vehicle number: 7F001-7, Optical multi-sensor measuring machine HEXAGON OPTIV CLASSIC 321 GL tp Year of manufacture: probably 2015 Machine number: 7F001-7 Availability: Immediately (by arrangement) Payment terms: Prepayment - by bank transfer Internal No.: OCU2 Can be inspected while powered on: YES Technical data: Metrology software: PC-DMIS Vision Vision sensor for non-contact measurement of smallest and precise components CCD camera with 6.5x motorized CNC zoom DC servo motors Modular probe changer: TESASTAR Linear guides in all axes Coaxial LED top light (white LED) LED back light (green LED + diffuser) Multi-segment LED ring light Maximum feed rate in the X, Y, Z axis: 160 mm/s Maximum workpiece weight: 20 kg Measuring resolution: 0.05 µm Measuring accuracy in the X, Y axis (optical sensor): Ex, Ey = (1.6 + L/250) µm Measuring accuracy in the XY axis (optical sensor): Exy = (2.0 + L/250) µm Measuring accuracy in the Z axis (optical sensor): Ez = (3.9 + L/200) µm Measuring accuracy in the X, Y axis (scanning probe system): Ex, Ey = (2.0 + L/250) µm Measuring accuracy in the XY axis (scanning probe system): Exy = (2.5 + L/250) µm Measuring accuracy in the Z axis (scanning probe system): Ez = (2.9 + L/200) µm Measuring volume optical sensor X 300 mm Y 200 mm Z 150 mm Measuring volume tactile sensor X 230 mm Y 200 mm Z 150 mm Scope of supply: - As shown in the pictures Note: The rolling shutter cabinet on which the PC is placed is not included in the scope of supply. Dimensions & weights: Installation dimensions L x W x H approx.: 705 x 986 x 890 mm Weight approx.: 170 kg ⚠️Additional notes: Hodpfx Aezk I T Rea Ejfi ►The goods are sold with exclusion of any warranty ►Technical data without guarantee ►Subject to prior sale ❗The sale of the goods is exclusively to business customers❗

Condition: excellent (used), Catalogue number 7445 TECHNICAL DATA - Track width: 250 mm - Roller width: 400 mm - Max. blade diameter: 400 mm - Blade bore diameter: 80 mm - Max. cutting height: 140 mm - Table width with clearance: 730 mm - Table length: 2120 mm *From above: - Pawls - Pressure roller, smooth - Pawls - Pressure roller, smooth - Saw shaft - Smooth pressure rollers, 2 pcs. From below: - Guide - Sliding shaft, smooth - Pawls - Track - Central lubrication - 2 lasers - Infinitely variable feed speed adjustment - Feed motor: 1.1 kW - Main motor: 37 kW - Electric lifting of the frame: 0.75 kW - Electric lifting of the saw shaft: 0.75 kW - Extraction port diameter: 200 mm - Overall dimensions (L/W/H): 2200x1850x2100 mm - Weight approx.: 3000 kg Hjdpfx Aaeza D Rre Eefi ADVANTAGES – German manufacture – Laser – Electric lifting of the frame and shaft – Infinitely variable feed speed adjustment – Used multi-blade saw, in very good condition Net price: 109,900 PLN Net price: 26,160 EUR depending on the exchange rate of 4.2 EUR (Prices may change with significant rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 6650 TECHNICAL DATA - Max cutting height: 200 mm - Track width: 450 mm - Shaft width: 450 mm - Blade bore diameter: 80 mm - Shaft diameter: 60 mm - Min. blade diameter: 250 mm - Max. blade diameter: 350 mm - Max. width of cant: 870 mm - Min. length of cant: 1500 mm From above: - Pawls - Feed shaft, toothed, metal - Pawls - Feed shaft, toothed, metal - Pressure unit - Shaft with saw blades - 2 feed shafts, metal, pneumatically pressed From below: - Guide - Metal sliding roller - Pawls - Track - Shaft with saw blades - Track Hodpsza Edaefx Aa Eofi - Stepless feed speed adjustment via inverter 4-40 m/min - Main motors: 2 x 75 kW - Feed motor: 3 kW - Electric vertical movement of body up/down: 0.55 kW - Electric adjustment of saw blade shafts: 2 x 0.25 kW - Central lubrication - Extraction nozzle diameter: 2 x 300 mm - Dimensions (L/W/H): 3100 x 2600 x 2000 mm - Weight: approx. 6500 kg - Centering device included - Toothed feed rollers: 3 pcs - Smooth feed rollers: 8 pcs - Motor: 2 x 1.5 kW - Pneumatic top pressure - Side pressure - Dimensions (L/W/H): 4850 x 1100 x 1800 mm - Weight: approx. 1000 kg ADVANTAGES – Czech manufacture – Double-shaft design – Centering device – DTR documentation – Year of manufacture: 2010 – Used multi-blade saw, in very good condition Net price: 262,900 PLN Net price: 62,600 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (in case of significant currency fluctuations, the price may change)

Condition: used, functionality: fully functional, Year of construction: 2020, load capacity: 2,600 kg, Double pallet fork Load center: 600 ISO class: ISO Class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: good Description: Year 2020 ISO 3A (51 cm) Capacity 2600 kg Hfodpfxszl Iwfo Aa Esi Side shift Opening range 560-1940 mm Width 1200 mm Fork length 1200 mm ID OS2080

Condition: used, functionality: fully functional, Year of construction: 2020, load capacity: 2,600 kg, Double pallet fork Load center: 600 ISO class: ISO Class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: good Description: Year 2020 ISO 3A (51 cm) Capacity 2600 kg Side shift Hfjdpfx Aozl Iv Ioa Eei Opening range 560-1940 mm Width 1200 mm Fork length 1200 mm ID OS2078

Condition: used, functionality: fully functional, Year of construction: 2020, load capacity: 2,600 kg, Double pallet fork Load center: 600 ISO class: ISO Class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: good Hfedezl Ivzspfx Aa Eji Description: Year 2020 ISO 3A (51 cm) Capacity 2600 kg Side shift Opening range 560-1940 mm Width 1200 mm Fork length 1200 mm ID OS2077

Condition: used, functionality: fully functional, Year of construction: 2020, load capacity: 2,600 kg, Double pallet fork Load center: 600 ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: good Description: Year 2020 ISO 3A (51 cm) Capacity 2600 kg Side shift Opening range 560-1940 mm Hfedpfx Aozl Ivuoa Eoi Width 1200 mm Fork length 1200 mm ID OS2076