Used Macerator Wet Grinder for sale (1,893)

Condition: excellent (used), Year of construction: 2004, Weinig Rondamat 960 Powerlock (Automatic straight knife grinder and profile grinder) Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! Specification as follows Weinig Rondamat 960 Powerlock / HSK profile grinder. High pecision knife grinder for sharpening straight knives and profiling using a template. Sharpening straight knives in the cutter block. Crjdpfew Np Uusx Ailod Manual grinding machine for profile and straight grinding. Grinding wheel diameter min./max.: 150 mm / 225 mm Grinding wheel width: Ceramic 5 mm, Borazone 10 mm Grinding wheel bore: 60 mm Tooling circle min./max.: 100 mm / 300 mm Tool width max.: 240 mm Grinding wheel drive: 1,1 kW Spindle rpm: 1700 / 2000 / 2400 / 3000 U/min Free angle: Radial: (at the back) 10 - 30 degrees, Axial: 0 - 20 degrees For swivel heads up to 60 degrees Coolant tank approx. 50 litres Table feed 0 - 240 mm Electrical connection approx. 2 kW Pneumatic connection value 5 bar Operating voltage 380 V / 50 Hz Full documentation. POWER LOCK SYSTEM option For grinding powerlock tools. Tool holder with manual HSK quick clamping system. Radial table clamping with fine adjustment Max tool width 240mm Max COMFORT PACKAGE option Variable grinding wheel speed 1500 to 3000rpm Lamp Back clearance angle is motorised Grinding wheel advance is motorised Setting of the side clearance angle is pneumatic Hydraulic grinding wheel clamping. Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!!

Condition: as good as new (ex-display), Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! CAN SHARPEN MAX 406MM DIAMETER CUTTERS !!! The G-716 Semi-automatic Cutterhead Grinder is used to sharpen 178mm to 406mm diameter eased edge, milled to pattern, and fingerjoint cutterheads. Worktable traversing is automatic and has adjustable stops. Cutterhead indexing is manual. Each knife is held against a positive stop while being ground !!! No Index Plate To Change No index plate to change when working with heads with different numbers of knives. The use of an index plate assumes that the knives and head separations are uniform throughout, which is often not the case. If the height of the knife is high or low, then the front face of the knife will vary from knife to knife making the task of grinding difficult. The one constant is the back face of the knife, therefore the use of an indexing stop against the back face will provide for accurate indexing regardless of the irregularities in the knives and head slots. Crsdpfeq Dzi Tox Ailod Head Indexing and Wheel Feed: Manual Minimum / Maximum Diameter Cutterhead: 7″ Min./16″Max. 178mm Min./ 406mm Max. Worktable Feed: Air / Oil Travel (maximum): 12″ 305mm. Adjustable Limits: Proximity Switch Speed: Fully Adjustable Index Method: Manual index after each knife is ground. Grinding Spindle: 1-1/2 HP Wash Down Duty TEFC Motor 3600 RPM, Dual ABEC 7 Precision Bearings, with Sealed Lubrication. 8″ (203mm)Diameter Grinding Wheel (9″ 229mm Diameter Max.) Coolant System: 15 Gallon Tank with Casters, Sediment Tray Full View Sight Glass, 5 GPM Pump (120VAC) Wash Down Hose Included Specifications Grinds 7″ to 16″ diameter eased edge, milled to pattern, and finger joint heads Automatic traversing worktable with adjustable travel limits Manual indexing of knives against a positive stop with grinding position pneumatic brake allowing precision indexing without the need of an index plate High precision 1-1/2 HP grinding spindle with sealed lubrication Recirculating adjustable flow flooded coolant system with wash down hose Fully enclosed grinding chamber with viewing windows and task light Grinding wheel feed allows unattended operation. New Proscale.

Condition: excellent (used), WADKIN SILHOUETTE STRAIGHT AND PROFILE GRINDER TWIN GRINDING HEAD:  A CENTRAL DESIGN FEATURE THAT ALLOWS FOR EXTREMELY FAST CHANGES BETWEEN PROFILE GRINDING AND STRAIGHT KNIFE GRINDING OR RESHARPENING. CAPACITY:  IT FEATURES A FULL 300 X 350MM GRINDING CAPACITY. PRECISION TOOLING:  Csdpfoyxxgmox Ailerd USES A UNIQUE TURRET HOLDER THAT CAN HOLD UP TO SIX STYLI, ALLOWING FOR QUICK SETUP ACROSS VARIOUS WORK TYPES. ADJUSTABILITY:  THE TEMPLATE SLIDE INCLUDES COARSE AND FINE ADJUSTMENT VIA DIAL INDICATORS FOR HIGH-ACCURACY POSITIONING. COMPACT DESIGN:  BUILT WITH SPACE-SAVING FEATURES TO FIT INTO SMALLER TOOLROOMS WHILE MAINTAINING THE ACCURACY OF LARGER AUTOMATIC MACHINES. INCLUDED: 40MM OR 50MM ARBOR AS NEEDED OPTICAS SETTING STAND

Condition: used, Year of construction: 1988, functionality: fully functional, power: 0.75 kW (1.02 HP), grinding belt width: 150 mm, grinding belt length: 7,850 mm, total height: 1,500 mm, total length: 4,500 mm, total width: 1,530 mm, grinding length: 2,800 mm, rotational speed (max.): 2,800 rpm, table length: 2,800 mm, table width: 800 mm, there are also grinding belts available at reduced price in granulations #150, #120, #100 and below Cedox Ty Stjpfx Ailord

Condition: used, functionality: fully functional, total height: 1,350 mm, total length: 570 mm, total width: 700 mm, overall weight: 160 kg, Tool grinding machine with tool holders in working condition. Cedsx Trr Eepfx Ailord

Condition: used, sanding disc diameter / mm Cedpfx Aiezhxm Neljrd Motor output / kW Overall size / mm machine weight ab. / kg

Year of construction: 2013, condition: excellent (used), Wanner grinder (4) D25.50S, 7.5 kW, inlet 50 x 30 cm, height 1.67 m, 24 knives, 2 pastry boards, 2013, Cjdpfxszhv Ecj Ailerd

Condition: used, JONES & SHIPMAN 1307 EIT Precision Toolroom Universal Grinding Machine Model 1307 EIT Maximum grinding diameter 356 mm Grinding length between centres 1016 mm Crjdpszi Eqqefx Ailsd Maximum swing 356 mm Workhead speeds 6 speeds, 40 – 320 rpm Grinding wheel size 300 x 25 x 127 mm Grinding wheel speeds 1750 / 2300 rpm Wheelhead motor 3 kW Internal grinding spindle speed 16,000 rpm Floor space required 3207 x 1359 mm Weight 1930 kg Supplied with: Double Swivel Wheel Slide, Double Wheelhead, Internal Grinding Spindle, 3 Jaw Chuck, 4 Jaw Chuck, Magnetic Chuck, Faceplate, 2 Point Steady, 3 Point Steady. For sale with Jet Machinery Ltd Jet Machinery Stock No: 27015 Machine Serial Number: TBC Cost: £3,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2008, Manufacturer: Haarslev Model: HFMI2000 / HF300GH Year: 2008 Condition: Used Serial Number: 305649 Stock Number: 3366 Mixer: Double paddle Capacity: 2000 litres Hole plate diameter: 300 mm Cjdpfx Asy S Rrhoilerd Infeed height: 2850 mm Outfeed height: 950 mm Compressed air: 6 - 8 Bar Power: 3 x 400V, 50Hz, 88kW Dimensions: 4950 x 3550 x 3550 mm Mixer cooled with nitrogen injection. HF10 feeding screw and pump of 2000 litres with ribbon mixer of 11kW. HF300GH grinding head of 300mm of 55kW. Including 2 tool trolleys.

Condition: used, Year of construction: 2010, Type: PowerGrind280 Serial number: 5000067561 Year of construction: 2010 Hole plate diameter: 280 mm Credpfx Aeyn Ntbeilsd Capacity: 5.5 - 8.5 t/h frozen blocks Hopper: 600 litres Power: 3 x 400V, 50Hz, 160kW Dimensions: 3250 x 1650 x 2450 mm Weight: 5000 kg Including trolley for removing breaking worm and trolley for screw, plates and knives

Condition: good (used), Year of construction: 2005, functionality: fully functional, CNC machining center Walter Helitronic Power Cjdpjzht Dvefx Ailjrd - Year of manufacture: 2005 - Control system: HMC600 i7 panel with Tool Studio 3.0 - Cylindrical loader - Grinding spindle motor power: 11.5 kW

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Rollomatic 660XW, year of manufacture 2024, 6-axis CNC tool grinding machine: Control system: FANUC 30iMB Crodezhtrgopfx Ailsd Grinding wheel changer: 6-position Tool diameter: Ø 0.1 – 12.7 mm 4 linear axes + 2 rotary axes Grinding spindle (max.): 14 kW Spindle speed: 500 – 12,000 rpm Machine dimensions: 1840 × 1560 × 2250 mm Machine weight: approx. 2,500 kg

Condition: excellent (used), Year of construction: 1999, Jung C-740-C year of construction: 1999 control: siemens magnet: 700 x 400 mm max. grinding range: 880 x 460 x 550 mm ( x,z,y) magnet variable attraction force variable speed: 1500-3500 rpm max. load on the table: 800 kg top clamp bottom clamp 2x remote control balancer various grinding stones Codou I Rtiopfx Ailerd documentation machine is under power for inspection

Condition: good (used), Year of construction: 2012, Kent KGS 250 WM1 surface grinding machine Cjdpox A D H Rjfx Ailsrd year of manufacture: 2012 max. grinding range: 460 x 200 mm max. height: 300 mm top dresser electronic handwheel variable magnetic force central lubrication touchscreen with settings for rough and finish grinding, etc. cooling water/filter tray documentation machine is powered on for inspection

Condition: excellent (used), Catalog number 7713 Cedpfxozab Eyo Ailord TECHNICAL DATA - max. width of workpiece 240mm - max. height of workpiece 130mm - 6 spindles: 1) horizontal lower 240mm, 7.5kW 2) vertical right 130mm, 5.5kW 3) vertical left 130mm, 5.5kW 4) horizontal upper 240mm, 7.5kW 5) horizontal upper 240mm, 5.5kW Spindles 4 and 5 are electrically adjustable up/down 6) horizontal lower 240mm, 5.5kW - all spindles adjustable up/down, left/right - spindle diameter 40mm *top: - 8 metal feed rollers, toothed, including 3 double rollers - 4 smooth rubber feed rollers, including 2 double rollers *bottom: - 3 smooth feed rollers - 3 side pressure rollers - stepless feed speed adjustment via inverter - rollers with pneumatic pressure - feed motor 7.5kW - feed via Cardan shafts - electric adjustment of planing thickness - body lifting motor 0.75kW - length of infeed table 2480mm - pneumatic opening/closing of the guard - pneumatic blowing of the table - central lubrication of the table - diameter of dust extraction nozzles 3x120mm, 3x150mm - dimensions L/W/H 5300x1700x1800mm - weight 5000kg ADVANTAGES - Made in Italy - With 6 heads - For both wet and dry wood - Pneumatic opening of the guard - Pneumatic blowing of the table - Spindles 4 and 5 are electrically adjustable - Used planer, very good condition Net price: 116900 PLN Net price: 27850 EUR, depending on the exchange rate of 4.2 EUR (Prices may change due to significant fluctuations)

Condition: excellent (used), Year of construction: 1986, machine/vehicle number: 815, total height: 1,900 mm, total length: 1,400 mm, total width: 900 mm, spindle speed (max.): 10,000 rpm, spindle speed (min.): 2,000 rpm, overall weight: 600 kg, table length: 500 mm, table width: 200 mm, Equipment: rotational speed infinitely variable, TECHNICAL DETAILS: - Serial number: 815 - Operating voltage: 380 V - Frequency: 50–60 Hz - Rated current: 14 A - Table dimensions: 500 x 200 mm WORKING RANGE & CAPACITY: - Universal dividing head center height: 170 mm - Tailstock center height: 120 mm (with intermediate support: 170 mm) - Max. workpiece length between centers: 336 mm - Workpiece diameter with unsupported mounting: approx. 600 mm - Max. center length: 950 mm - Internal taper of indexing spindle: Morse 4 / Unified 40 - T-slots: 12 mm (machine base), 8 mm (additional elements) TRAVEL & ADJUSTMENTS: - Sharpening stroke: 190 mm - Cross travel of tool holder: 100 mm - Vertical movement of grinding head: 325 mm - Tool holder: 230 mm - Indexing device on tool slide: 330 mm ROTATION / SWIVEL RANGES: - Grinding head mounting / tool holder / grinding head / universal headstock: 360° DRIVE & SPEEDS: - Three-phase motor: 0.7 / 0.85 kW - DC motor: 1.3 kW - Spindle speed: 4000 / 8000 rpm (dual speed) - Stepless DC: 2000 – 10000 rpm Codpswxrfpjfx Ailerd ACCESSORIES: - Includes two-axis digital readout - Extensive accessories set suitable for the machine

Condition: good (used), Small punch sharpening machine, equipped with a chuck. Further information available upon request. Cedpfozhfzyjx Ailord

Condition: excellent (used), Drills grinder for sharpening of twist drills, diamond drills, step drills, center drills, counterborers, standard 2-3-4-6 cutting edges taps,etc. Crsdpfx Aiozhbqweljd

Condition: used, functionality: fully functional, power: 3 kW (4.08 HP), grinding belt width: 120 mm, grinding belt length: 6,900 mm, grinding height: 1,100 mm, height adjustment type: electric, grinding belt speed: 20,000 mm/s, total height: 1,460 mm, total length: 3,560 mm, total width: 1,270 mm, overall weight: 464 kg, Equipment: documentation/manual, Mini Max NK-L 55-CH long belt sanding machine Very space-saving, used long belt sanding machine / universal belt sanding machine from Mini Max, model NK-L 55-CH. The table can be folded down and is motor-adjustable in height. This allows even larger furniture parts to be sanded directly. Unlimited sanding is possible in terms of length, as the table is movable. The machine features a special sanding shoe worth approximately CHF 800. In addition, a total of 15 new sanding belts with grit sizes from 80 to 220 are included in the scope of delivery. Crodpozik Sasfx Ailod The machine is still in operation and can be inspected by appointment.

Condition: used, Manufacturer: Kuderer Maschinenbau GmbH Model: AZ-2 Year: 1992 Belt Grinder Overall dimensions: 1000 x 440 x 1080 mm Belt size: 150 x 1440 mm Power: 1.5 kW Extractor Overall dimensions: 560 x 560 x 690 mm Crjdpfx Ajy N Nw Rjilsd

Condition: ready for operation (used), Tool grinder, tool sharpener, drill sharpener, Schanbacher S3-50 Cedjx Dbltspfx Ailjrd Manufacturer: Schanbacher Type: S3-50 Year: 2012 Dimensions: 460 × 600 × 1260 mm Drill diameter: 3–50 mm; Point angle: 90°–140° Includes: Protective cover, dust extraction system

Condition: used, Year of construction: 1994, Grinding length: 2600 mm Grinding width: 850 mm Dust extraction nozzle diameter: 180 mm Motor: 4 kW Speed: 1430 rpm Belt speed: 22 m/s Weight: approx. 700 kg Location: Customer Csdpfozg Nawox Ailord

Year of construction: 2020, operating hours: 3,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: SN_20-96, Wet dust collector from Absaugwerk, model W 3000, for sale We are offering a wet dust collector from Absaugwerk for sale. This unit is the ideal addition to grinding and deburring machines. It is particularly suitable for extracting aluminum grinding dust, as sparks are reliably extinguished in the wet dust collector. Optionally, the machine can be equipped with a HEPA filter, making it also suitable for processing stainless steel. Technical data: Manufacturer: Absaugwerk Machine type: Wet dust collector, series W 3000 Motor power: 7.5 kW Voltage: 400 V / 50 Hz Discharge: Drain valve Filling: Automatic via solenoid valve The machine is no longer in use at our facility but is in working condition and can be inspected and tested at any time. Crjdpfxezicy No Ailed If you have any questions or are interested, please do not hesitate to contact us.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 1761-1700, 457 x 152mm capacity. Equipped with magnetic chuck, power rise and fall to wheel head, table guard, coolant system, and dust extraction. SPECIFICATION Jones & Shipman Model 540P Working Surface of table 457 x 152mm Longitudinal traverse of table, hand and hydraulic 483mm Total cross traverse of table, hand and hydraulic 168mm Floor to table height 1035mm Table traverse speed range per min 1.5 – 18m Cross feed range per stroke at each reversal 0.178 – 1.78mm Micrometer cross feed graduated in Vertical feed adjustment in increments of 0.002mm Vertical movement of wheelhead (max) 280mm Wheel spindle center to table (min) 50mm Size of grinding wheel 180 x 13 x 31.75mm bore Speed of wheel 2880rpm Wheelhead motor 1.5kW Hydraulic pump motor 0.55kW Machine in Imperial execution MACHINE EQUIPPED WITH Magnetic chuck Power rise and fall to wheel head Cedpfx Ajnxi Uujilerd Table guard Wheel guard Coolant System Dust extraction

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: BO 94392, A familair machine in any toolroom, this Jones and Shipman 540P is equipped with a 6″ x 18″ magnetic chuck, power rise and fall, coolant system and dust extraction. A toolroom institution: USED Jones & Shipman Model 540P Horizontal Spindle Surface Grinding Machine Specification Working Surface of the table 457 x 152mm Longitudinal traverse of table, hand and hydraulic 483mm Total cross traverse of table, hand and hydraulic 168mm Floor-to-table height 1035mm Table traverse speed range per min 1.5 – 18m Cross-feed range per stroke at each reversal 0.178 – 1.78mm Micrometer cross feed graduated in Vertical feed adjustment in increments of 0.002mm Vertical movement of wheelhead (max) 280mm Wheel spindle centre to table (min) 50mm Size of grinding wheel 180 x 13 x 31.75mm bore Speed of wheel 3000rpm Wheelhead motor 1.5kW Hydraulic pump motor 0.55kW Machine in Imperial execution Machine equipped with Crsdpfxjnxi R Ue Ailod Magnetic chuck Power rise and fall to wheel head Table guard Wheel guard Coolant System Dust extraction Lighting